The header files eval.h is included twice in ipe.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9796
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add various happy/unhappy unit tests for both IPE's policy parser.
Besides, a test suite for IPE functionality is available at
https://github.com/microsoft/ipe/tree/test-suite
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Enables an IPE policy to be enforced from kernel start, enabling access
control based on trust from kernel startup. This is accomplished by
transforming an IPE policy indicated by CONFIG_IPE_BOOT_POLICY into a
c-string literal that is parsed at kernel startup as an unsigned policy.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Enable IPE policy authors to indicate trust for a singular fsverity
file, identified by the digest information, through "fsverity_digest"
and all files using valid fsverity builtin signatures via
"fsverity_signature".
This enables file-level integrity claims to be expressed in IPE,
allowing individual files to be authorized, giving some flexibility
for policy authors. Such file-level claims are important to be expressed
for enforcing the integrity of packages, as well as address some of the
scalability issues in a sole dm-verity based solution (# of loop back
devices, etc).
This solution cannot be done in userspace as the minimum threat that
IPE should mitigate is an attacker downloads malicious payload with
all required dependencies. These dependencies can lack the userspace
check, bypassing the protection entirely. A similar attack succeeds if
the userspace component is replaced with a version that does not
perform the check. As a result, this can only be done in the common
entry point - the kernel.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Allows author of IPE policy to indicate trust for a singular dm-verity
volume, identified by roothash, through "dmverity_roothash" and all
signed and validated dm-verity volumes, through "dmverity_signature".
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: fixed some line length issues in the comments]
Signed-off-by: Paul Moore <paul@paul-moore.com>
IPE, like SELinux, supports a permissive mode. This mode allows policy
authors to test and evaluate IPE policy without it affecting their
programs. When the mode is changed, a 1404 AUDIT_MAC_STATUS will
be reported.
This patch adds the following audit records:
audit: MAC_STATUS enforcing=0 old_enforcing=1 auid=4294967295
ses=4294967295 enabled=1 old-enabled=1 lsm=ipe res=1
audit: MAC_STATUS enforcing=1 old_enforcing=0 auid=4294967295
ses=4294967295 enabled=1 old-enabled=1 lsm=ipe res=1
The audit record only emit when the value from the user input is
different from the current enforce value.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Users of IPE require a way to identify when and why an operation fails,
allowing them to both respond to violations of policy and be notified
of potentially malicious actions on their systems with respect to IPE
itself.
This patch introduces 3 new audit events.
AUDIT_IPE_ACCESS(1420) indicates the result of an IPE policy evaluation
of a resource.
AUDIT_IPE_CONFIG_CHANGE(1421) indicates the current active IPE policy
has been changed to another loaded policy.
AUDIT_IPE_POLICY_LOAD(1422) indicates a new IPE policy has been loaded
into the kernel.
This patch also adds support for success auditing, allowing users to
identify why an allow decision was made for a resource. However, it is
recommended to use this option with caution, as it is quite noisy.
Here are some examples of the new audit record types:
AUDIT_IPE_ACCESS(1420):
audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=297 comm="sh" path="/root/vol/bin/hello" dev="tmpfs"
ino=3897 rule="op=EXECUTE boot_verified=TRUE action=ALLOW"
audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=299 comm="sh" path="/mnt/ipe/bin/hello" dev="dm-0"
ino=2 rule="DEFAULT action=DENY"
audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=300 path="/tmp/tmpdp2h1lub/deny/bin/hello" dev="tmpfs"
ino=131 rule="DEFAULT action=DENY"
The above three records were generated when the active IPE policy only
allows binaries from the initramfs to run. The three identical `hello`
binary were placed at different locations, only the first hello from
the rootfs(initramfs) was allowed.
Field ipe_op followed by the IPE operation name associated with the log.
Field ipe_hook followed by the name of the LSM hook that triggered the IPE
event.
Field enforcing followed by the enforcement state of IPE. (it will be
introduced in the next commit)
Field pid followed by the pid of the process that triggered the IPE
event.
Field comm followed by the command line program name of the process that
triggered the IPE event.
Field path followed by the file's path name.
Field dev followed by the device name as found in /dev where the file is
from.
Note that for device mappers it will use the name `dm-X` instead of
the name in /dev/mapper.
For a file in a temp file system, which is not from a device, it will use
`tmpfs` for the field.
The implementation of this part is following another existing use case
LSM_AUDIT_DATA_INODE in security/lsm_audit.c
Field ino followed by the file's inode number.
Field rule followed by the IPE rule made the access decision. The whole
rule must be audited because the decision is based on the combination of
all property conditions in the rule.
Along with the syscall audit event, user can know why a blocked
happened. For example:
audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=2138 comm="bash" path="/mnt/ipe/bin/hello" dev="dm-0"
ino=2 rule="DEFAULT action=DENY"
audit[1956]: SYSCALL arch=c000003e syscall=59
success=no exit=-13 a0=556790138df0 a1=556790135390 a2=5567901338b0
a3=ab2a41a67f4f1f4e items=1 ppid=147 pid=1956 auid=4294967295 uid=0
gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0
ses=4294967295 comm="bash" exe="/usr/bin/bash" key=(null)
The above two records showed bash used execve to run "hello" and got
blocked by IPE. Note that the IPE records are always prior to a SYSCALL
record.
AUDIT_IPE_CONFIG_CHANGE(1421):
audit: AUDIT1421
old_active_pol_name="Allow_All" old_active_pol_version=0.0.0
old_policy_digest=sha256:E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649
new_active_pol_name="boot_verified" new_active_pol_version=0.0.0
new_policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F
auid=4294967295 ses=4294967295 lsm=ipe res=1
The above record showed the current IPE active policy switch from
`Allow_All` to `boot_verified` along with the version and the hash
digest of the two policies. Note IPE can only have one policy active
at a time, all access decision evaluation is based on the current active
policy.
The normal procedure to deploy a policy is loading the policy to deploy
into the kernel first, then switch the active policy to it.
AUDIT_IPE_POLICY_LOAD(1422):
audit: AUDIT1422 policy_name="boot_verified" policy_version=0.0.0
policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F2676
auid=4294967295 ses=4294967295 lsm=ipe res=1
The above record showed a new policy has been loaded into the kernel
with the policy name, policy version and policy hash.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
As is typical with LSMs, IPE uses securityfs as its interface with
userspace. for a complete list of the interfaces and the respective
inputs/outputs, please see the documentation under
admin-guide/LSM/ipe.rst
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
IPE is designed to provide system level trust guarantees, this usually
implies that trust starts from bootup with a hardware root of trust,
which validates the bootloader. After this, the bootloader verifies
the kernel and the initramfs.
As there's no currently supported integrity method for initramfs, and
it's typically already verified by the bootloader. This patch introduces
a new IPE property `boot_verified` which allows author of IPE policy to
indicate trust for files from initramfs.
The implementation of this feature utilizes the newly added
`initramfs_populated` hook. This hook marks the superblock of the rootfs
after the initramfs has been unpacked into it.
Before mounting the real rootfs on top of the initramfs, initramfs
script will recursively remove all files and directories on the
initramfs. This is typically implemented by using switch_root(8)
(https://man7.org/linux/man-pages/man8/switch_root.8.html).
Therefore the initramfs will be empty and not accessible after the real
rootfs takes over. It is advised to switch to a different policy
that doesn't rely on the `boot_verified` property after this point.
This ensures that the trust policies remain relevant and effective
throughout the system's operation.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
IPE's initial goal is to control both execution and the loading of
kernel modules based on the system's definition of trust. It
accomplishes this by plugging into the security hooks for
bprm_check_security, file_mprotect, mmap_file, kernel_load_data,
and kernel_read_data.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Introduce a core evaluation function in IPE that will be triggered by
various security hooks (e.g., mmap, bprm_check, kexec). This function
systematically assesses actions against the defined IPE policy, by
iterating over rules specific to the action being taken. This critical
addition enables IPE to enforce its security policies effectively,
ensuring that actions intercepted by these hooks are scrutinized for policy
compliance before they are allowed to proceed.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
IPE's interpretation of the what the user trusts is accomplished through
its policy. IPE's design is to not provide support for a single trust
provider, but to support multiple providers to enable the end-user to
choose the best one to seek their needs.
This requires the policy to be rather flexible and modular so that
integrity providers, like fs-verity, dm-verity, or some other system,
can plug into the policy with minimal code changes.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: added NULL check in parse_rule() as discussed]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Integrity Policy Enforcement (IPE) is an LSM that provides an
complimentary approach to Mandatory Access Control than existing LSMs
today.
Existing LSMs have centered around the concept of access to a resource
should be controlled by the current user's credentials. IPE's approach,
is that access to a resource should be controlled by the system's trust
of a current resource.
The basis of this approach is defining a global policy to specify which
resource can be trusted.
Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
