Macro PAGE_OFFSET(0xffff880000000000) in sampleip_user.c is inaccurate,
for example, in aarch64 architecture, this value depends on the
CONFIG_ARM64_VA_BITS compilation configuration, this value defaults to 48,
the corresponding PAGE_OFFSET is 0xffff800000000000, if we use the value
defined in sampleip_user.c, then all KSYMs obtained by sampleip are (user)
Symbol error due to PAGE_OFFSET error:
$ sudo ./sampleip 1
Sampling at 99 Hertz for 1 seconds. Ctrl-C also ends.
ADDR KSYM COUNT
0xffff80000810ceb8 (user) 1
0xffffb28ec880 (user) 1
0xffff8000080c82b8 (user) 1
0xffffb23fed24 (user) 1
0xffffb28944fc (user) 1
0xffff8000084628bc (user) 1
0xffffb2a935c0 (user) 1
0xffff80000844677c (user) 1
0xffff80000857a3a4 (user) 1
...
A few examples of addresses in the CONFIG_ARM64_VA_BITS=48 environment in
the aarch64 environment:
$ sudo head /proc/kallsyms
ffff8000080a0000 T _text
ffff8000080b0000 t gic_handle_irq
ffff8000080b0000 T _stext
ffff8000080b0000 T __irqentry_text_start
ffff8000080b00b0 t gic_handle_irq
ffff8000080b0230 t gic_handle_irq
ffff8000080b03b4 T __irqentry_text_end
ffff8000080b03b8 T __softirqentry_text_start
ffff8000080b03c0 T __do_softirq
ffff8000080b0718 T __entry_text_start
We just need to replace the PAGE_OFFSET with the address _text in
/proc/kallsyms to solve this problem:
$ sudo ./sampleip 1
Sampling at 99 Hertz for 1 seconds. Ctrl-C also ends.
ADDR KSYM COUNT
0xffffb2892ab0 (user) 1
0xffffb2b1edfc (user) 1
0xffff800008462834 __arm64_sys_ppoll 1
0xffff8000084b87f4 eventfd_read 1
0xffffb28e6788 (user) 1
0xffff8000081e96d8 rcu_all_qs 1
0xffffb2ada878 (user) 1
...
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Link: https://lore.kernel.org/r/tencent_A0E82E0BEE925285F8156D540731DF805F05@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix fout being fopen'ed but then not subsequently fclose'd. In the affected
branch, fout is otherwise going out of scope.
Signed-off-by: Hao Zeng <zenghao@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230411084349.1999628-1-zenghao@kylinos.cn
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and samples in the bpf code still refer to this older
debugfs path, so let's update them to avoid confusion. There are a few
spots where the bpf code explicitly checks both tracefs and debugfs
(tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left
those alone so that the tools can continue to work with both paths.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230313205628.1058720-2-zwisler@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit fe3300897cbf("samples: bpf: fix syscall_tp due to unused syscall")
added openat() syscall tracepoints. This patch adds support for
openat2() as well.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_9381CB1A158ED7ADD12C4406034E21A3AC07@qq.com
This commit changes the _kern suffix to .bpf with the BPF test programs.
With this modification, test programs will inherit the benefit of the
new CLANG-BPF compile target.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-11-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit applies vmlinux.h to BPF functionality testing program.
Macros that were not defined despite migration to "vmlinux.h" were
defined separately in individual files.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-10-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit applies "net_shared.h" to BPF programs to remove existing
network related header dependencies. Also, this commit removes
unnecessary headers before applying "vmlinux.h" to the BPF programs.
Mostly, endianness conversion function has been applied to the source.
In addition, several macros have been defined to fulfill the INET,
TC-related constants.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-9-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, many programs under sample/bpf often include individual
macros by directly including the header under "linux/" rather than
using the "vmlinux.h" header.
However, there are some problems with migrating to "vmlinux.h" because
there is no definition for utility functions such as endianness
conversion (ntohs/htons). Fortunately, the xdp_sample program already
has a function that can be replaced to solve this problem.
Therefore, this commit attempts to separate these functions into a file
called net_shared.h to make them universally available. Additionally,
this file includes network-related macros that are not defined in
"vmlinux.h". (inspired by 'selftests' bpf_tracing_net.h)
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-8-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With libbpf 1.0 release, support for legacy BPF map declaration syntax
had been dropped. If you run a program using legacy BPF in the latest
libbpf, the following error will be output.
libbpf: map 'lwt_len_hist_map' (legacy): legacy map definitions are deprecated, use BTF-defined maps instead
libbpf: Use of BPF_ANNOTATE_KV_PAIR is deprecated, use BTF-defined maps in .maps section instead
This commit replaces legacy map with the BTF-defined map.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-7-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_overhead bpf program is designed to compare performance
between tracepoint and kprobe. Initially it used task_rename and
urandom_read tracepoint.
However, commit 14c174633f ("random: remove unused tracepoints")
removed urandom_read tracepoint, and for this reason the test_overhead
got broken.
This commit introduces new microbenchmark using fib_table_lookup.
This microbenchmark sends UDP packets to localhost in order to invoke
fib_table_lookup.
In a nutshell:
fd = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
addr.sin_addr.s_addr = inet_addr(DUMMY_IP);
addr.sin_port = htons(DUMMY_PORT);
for() {
sendto(fd, buf, strlen(buf), 0,
(struct sockaddr *)&addr, sizeof(addr));
}
on 4 cpus in parallel:
lookup per sec
base (no tracepoints, no kprobes) 381k
with kprobe at fib_table_lookup() 325k
with tracepoint at fib:fib_table_lookup 330k
with raw_tracepoint at fib:fib_table_lookup 365k
Fixes: 14c174633f ("random: remove unused tracepoints")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-6-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, executing test_cgrp2_sock2 fails due to wrong section
header. This 'cgroup/sock1' style section is previously used at
'samples/bpf_load' (deprecated) BPF loader. Because this style isn't
supported in libbpf, this commit fixes this problem by correcting the
section header.
$ sudo ./test_cgrp2_sock2.sh
libbpf: prog 'bpf_prog1': missing BPF prog type, check ELF section name 'cgroup/sock1'
libbpf: prog 'bpf_prog1': failed to load: -22
libbpf: failed to load object './sock_flags_kern.o'
ERROR: loading BPF object file failed
In addition, this BPF program filters ping packets by comparing whether
the socket type uses SOCK_RAW. However, after the ICMP socket[1] was
developed, ping sends ICMP packets using SOCK_DGRAM. Therefore, in this
commit, the packet filtering is changed to use SOCK_DGRAM instead of
SOCK_RAW.
$ strace --trace socket ping -6 -c1 -w1 ::1
socket(AF_INET6, SOCK_DGRAM, IPPROTO_ICMPV6) = 3
[1]: https://lwn.net/Articles/422330/
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-5-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_lwt_bpf is a script that tests the functionality of BPF through
the output of the ftrace with bpf_trace_printk. Currently, this program
is not operating normally for several reasons.
First of all, this test script can't parse the ftrace results properly.
GNU sed tries to be as greedy as possible when attempting pattern
matching. Due to this, cutting metadata (such as timestamp) from the
log entry of ftrace doesn't work properly, and also desired log isn't
extracted properly. To make sed stripping clearer, 'nocontext-info'
option with the ftrace has been used to remove metadata from the log.
Also, instead of using unclear pattern matching, this commit specifies
an explicit parse pattern.
Also, unlike before when this test was introduced, the way
bpf_trace_printk behaves has changed[1]. The previous bpf_trace_printk
had to always have '\n' in order to print newline, but now that the
bpf_trace_printk call includes newline by default, so '\n' is no longer
needed.
Lastly with the lwt ENCAP_BPF out, the context information with the
sk_buff protocol is preserved. Therefore, this commit changes the
previous test result from 'protocol 0' to 'protocol 8', which means
ETH_P_IP.
[1]: commit ac5a72ea5c ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-4-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, some test scripts are experiencing minor errors related to
executing tests.
$ sudo ./test_cgrp2_sock.sh
./test_cgrp2_sock.sh: 22: test_cgrp2_sock: not found
This problem occurs because the path to the execution target is not
properly specified. Therefore, this commit solves this problem by
specifying a relative path to its executables. This commit also makes
a concise refactoring of hard-coded BPF program names.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-3-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, a few of BPF tests use ipv6 functionality. The problem here
is that if ipv6 is disabled, these tests will fail, and even if the
test fails, it will not tell you why it failed.
$ sudo ./test_cgrp2_sock2.sh
RTNETLINK answers: Permission denied
In order to fix this, this commit ensures ipv6 is enabled prior to
running tests.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230115071613.125791-2-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit enhances the syscall tracing programs by using the
BPF_SYSCALL macro to reduce the inconvenience of parsing arguments from
pt_regs. By simplifying argument extraction, bpf program will become
clear to understand.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221224071527.2292-6-danieltimlee@gmail.com
Currently, there is a problem with tracex2, as it doesn't print the
histogram properly and the results are misleading. (all results report
as 0)
The problem is caused by a change in arguments of the function to which
the kprobe connects. This tracex2 bpf program uses kprobe (attached
to __x64_sys_write) to figure out the size of the write system call. In
order to achieve this, the third argument 'count' must be intact.
The following is a prototype of the sys_write variant. (checked with
pfunct)
~/git/linux$ pfunct -P fs/read_write.o | grep sys_write
ssize_t ksys_write(unsigned int fd, const char * buf, size_t count);
long int __x64_sys_write(const struct pt_regs * regs);
... cross compile with s390x ...
long int __s390_sys_write(struct pt_regs * regs);
Since the nature of SYSCALL_WRAPPER function wraps the argument once,
additional process of argument extraction is required to properly parse
the argument.
#define BPF_KSYSCALL(name, args...)
... snip ...
struct pt_regs *regs = LINUX_HAS_SYSCALL_WRAPPER \
? (struct pt_regs *)PT_REGS_PARM1(ctx) \
: ctx; \
In order to fix this problem, the BPF_SYSCALL macro has been used. This
reduces the hassle of parsing arguments from pt_regs. Since the macro
uses the CORE version of argument extraction, additional portability
comes too.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221224071527.2292-5-danieltimlee@gmail.com
Currently old compile rule (CLANG-bpf) doesn't contains VMLINUX_H define
flag which is essential for the bpf program that includes "vmlinux.h".
Also old compile rule doesn't directly specify the compile target as bpf,
instead it uses bunch of extra options with clang followed by long chain
of commands. (e.g. clang | opt | llvm-dis | llc)
In Makefile, there is already new compile rule which is more simple and
neat. And it also has -D__VMLINUX_H__ option. By just changing the _kern
suffix to .bpf will inherit the benefit of the new CLANG-BPF compile
target.
Also, this commit adds dummy gnu/stub.h to the samples/bpf directory.
As commit 1c2dd16add ("selftests/bpf: get rid of -D__x86_64__") noted,
compiling with 'clang -target bpf' will raise an error with stubs.h
unless workaround (-D__x86_64) is used. This commit solves this problem
by adding dummy stub.h to make /usr/include/features.h to follow the
expected path as the same way selftests/bpf dealt with.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221224071527.2292-4-danieltimlee@gmail.com
This commit applies vmlinux.h to syscall tracing program. This change
allows the bpf program to refer to the internal structure as a single
"vmlinux.h" instead of including each header referenced by the bpf
program.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221224071527.2292-3-danieltimlee@gmail.com
Syscall tracing using kprobe is quite unstable. Since it uses the exact
name of the kernel function, the program might broke due to the rename
of a function. The problem can also be caused by a changes in the
arguments of the function to which the kprobe connects.
In this commit, ksyscall is used instead of kprobe. By using ksyscall,
libbpf will detect the appropriate kernel function name.
(e.g. sys_write -> __s390_sys_write). This eliminates the need to worry
about which wrapper function to attach in order to parse arguments.
In addition, ksyscall provides more fine method with attaching system
call, the coarse SYSCALL helper at trace_common.h can be removed.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221224071527.2292-2-danieltimlee@gmail.com
Currently, compiling samples/bpf with LLVM warns about the uninitialized
use of variable with test_current_task_under_cgroup.
./samples/bpf/test_current_task_under_cgroup_user.c:57:6:
warning: variable 'cg2' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (setup_cgroup_environment())
^~~~~~~~~~~~~~~~~~~~~~~~~~
./samples/bpf/test_current_task_under_cgroup_user.c:106:8:
note: uninitialized use occurs here
close(cg2);
^~~
./samples/bpf/test_current_task_under_cgroup_user.c:57:2:
note: remove the 'if' if its condition is always false
if (setup_cgroup_environment())
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./samples/bpf/test_current_task_under_cgroup_user.c:19:9:
note: initialize the variable 'cg2' to silence this warning
int cg2, idx = 0, rc = 1;
^
= 0
1 warning generated.
This commit resolve this compiler warning by pre-initialize the variable
with error for safeguard.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221218061453.6287-4-danieltimlee@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Currently, compiling samples/bpf with LLVM warns about the unused but
set variable with tracex4_user.
./samples/bpf/tracex4_user.c:54:14:
warning: variable 'i' set but not used [-Wunused-but-set-variable]
int map_fd, i, j = 0;
^
1 warning generated.
This commit resolve this compiler warning by replacing the meaningless
counter.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221218061453.6287-3-danieltimlee@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Currently, compiling samples/bpf with LLVM warns about the unused
function with test_lru_dist.
./samples/bpf/test_lru_dist.c:45:19:
warning: unused function 'list_empty' [-Wunused-function]
static inline int list_empty(const struct list_head *head)
^
1 warning generated.
This commit resolve this compiler warning by removing the abandoned
function.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221218061453.6287-2-danieltimlee@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The latest version of grep (3.8+) claims the egrep is now obsolete so the
build now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
Fix this up by moving the related file to use "grep -E" instead.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/1668765001-12477-1-git-send-email-yangtiezhu@loongson.cn
since commit 450b167fb9be("libbpf: clean up SEC() handling"),
sec_def_matches() does not recognize "socket/xxx" as "socket", therefore,
the BPF program type is not recognized.
Instead of sockex3_user.c parsing section names to get the BPF program fd.
We use the program array map to assign a static index to each BPF program
(get inspired by selftests/bpf progs/test_prog_array_init.c).
Therefore, use SEC("socket") as section name instead of SEC("socket/xxx"),
so that the BPF program is parsed to SOCKET_FILTER type. The "missing BPF
prog type" problem is solved.
How to reproduce this error:
$ cd samples/bpf
$ sudo ./sockex3
libbpf: prog 'bpf_func_PARSE_IP': missing BPF prog type, check ELF section name 'socket/3'
libbpf: prog 'bpf_func_PARSE_IP': failed to load: -22
libbpf: failed to load object './sockex3_kern.o'
ERROR: loading BPF object file failed
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_EBA3C18864069E42175946973C2ACBAF5408@qq.com
since commit c504e5c2f964("net: skb: introduce kfree_skb_reason()")
kfree_skb() is replaced by kfree_skb_reason() and kfree_skb() is set to
the inline function. So, we replace kprobe/kfree_skb with
kprobe/kfree_skb_reason to solve the tracex2 error.
$ cd samples/bpf
$ sudo ./tracex2
libbpf: prog 'bpf_prog2': failed to create kprobe 'kfree_skb+0x0' perf event: No such file or directory
ERROR: bpf_program__attach failed
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_0F0DAE84C0B3C42E0B550E5E9F47A9114D09@qq.com
This change fixes some typos found in the BPF samples README file.
Signed-off-by: Daniel Müller <deso@posteo.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221018163231.1926462-1-deso@posteo.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
xdp2_kern rewrites and forwards packets out on the same interface.
Forwarding still works but rewrite got broken when xdp multibuffer
support has been added.
With xdp multibuffer a local copy of the packet has been introduced. The
MAC address is now swapped in the local copy, but the local copy in not
written back.
Fix MAC address swapping be adding write back of modified packet.
Fixes: 7722517422 ("samples/bpf: fixup some tools to be able to support xdp multibuffer")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Link: https://lore.kernel.org/r/20221015213050.65222-1-gerhard@engleder-embedded.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
BPF map iteration in xdp1_user results in endless loop without any
output, because the return value of bpf_map_get_next_key() is checked
against the wrong value.
Other call locations of bpf_map_get_next_key() check for equal 0 for
continuing the iteration. xdp1_user checks against unequal -1. This is
wrong for a function which can return arbitrary negative errno values,
because a return value of e.g. -2 results in an endless loop.
With this fix xdp1_user is printing statistics again:
proto 0: 1 pkt/s
proto 0: 1 pkt/s
proto 17: 107383 pkt/s
proto 17: 881655 pkt/s
proto 17: 882083 pkt/s
proto 17: 881758 pkt/s
Fixes: bd054102a8 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221013200922.17167-1-gerhard@engleder-embedded.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Currently, when cross compiling bpf samples, the host side cannot
use arch-specific bpftool to generate vmlinux.h or skeleton. Since
samples/bpf use bpftool for vmlinux.h, skeleton, and static linking
only, we can use lightweight bootstrap version of bpftool to handle
these, and it's always host-native.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220714024612.944071-2-pulehui@huawei.com
The ARRAY_SIZE macro is more compact and more formal in linux source.
Signed-off-by: Linkui Xiao <xiaolinkui@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220712072302.13761-1-xiaolinkui@kylinos.cn
LLVM compiler optimized out the memcpy in xdp_redirect_map_egress,
which caused the Ethernet source MAC-addr to always be zero
when enabling the devmap egress prog via cmdline --load-egress.
Issue observed with LLVM version 14.0.0
- Shipped with Fedora 36 on target: x86_64-redhat-linux-gnu.
In verbose mode print the source MAC-addr in case xdp_devmap_attached
mode is used.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/165754826292.575614.5636444052787717159.stgit@firesoul
Remove the AF_XDP samples from samples/bpf/ as they are dependent on
the AF_XDP support in libbpf. This support has now been removed in the
1.0 release, so these samples cannot be compiled anymore. Please start
to use libxdp instead. It is backwards compatible with the AF_XDP
support that was offered in libbpf. New samples can be found in the
various xdp-project repositories connected to libxdp and by googling.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20220630093717.8664-1-magnus.karlsson@gmail.com
This changes the section name for the bpf program embedded in these
files to "xdp.frags" to allow the programs to be loaded on drivers that
are using an MTU greater than PAGE_SIZE. Rather than directly accessing
the buffers, the packet data is now accessed via xdp helper functions to
provide an example for those who may need to write more complex
programs.
v2: remove new unnecessary variable
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20220621175402.35327-1-gospo@broadcom.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
samples/bpf build currently always fails if it can't generate
vmlinux.h from vmlinux, even when vmlinux.h is directly provided by
VMLINUX_H variable, which makes VMLINUX_H pointless.
Only fails when neither method works.
Fixes: 384b6b3bbf ("samples: bpf: Add vmlinux.h generation support")
Reported-by: CKI Project <cki-project@redhat.com>
Reported-by: Veronika Kabatova <vkabatov@redhat.com>
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220507161635.2219052-1-jmarchan@redhat.com
When xdp_rxq_info_user program exits unexpectedly, it doesn't detach xdp
prog of device, and other xdp prog can't be attached to the device. So
call init_exit() to detach xdp prog when program exits unexpectedly.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220427062338.80173-1-shaozhengchao@huawei.com
If interval is 2, and sum - prev[key] = 1, the result = 0. This will
mislead the tester that the port has no traffic right now. So reduce the
sampling interval to 1.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220419114746.291613-1-shaozhengchao@huawei.com
We have switched to memcg-based memory accouting and thus the rlimit is
not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in
libbpf for backward compatibility, so we can use it instead now.
This patch also removes the useless header sys/resource.h from many files
in samples/bpf.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409125958.92629-2-laoar.shao@gmail.com
Users of the xdp_sample_user infra should be explicitly linked
with the standard math library (`-lm`). Otherwise, the following
happens:
/usr/bin/ld: xdp_sample_user.c:(.text+0x59fc): undefined reference to `ceil'
/usr/bin/ld: xdp_sample_user.c:(.text+0x5a0d): undefined reference to `ceil'
/usr/bin/ld: xdp_sample_user.c:(.text+0x5adc): undefined reference to `floor'
/usr/bin/ld: xdp_sample_user.c:(.text+0x5b01): undefined reference to `ceil'
/usr/bin/ld: xdp_sample_user.c:(.text+0x5c1e): undefined reference to `floor'
/usr/bin/ld: xdp_sample_user.c:(.text+0x5c43): undefined reference to `ceil
[...]
That happened previously, so there's a block of linkage flags in the
Makefile. xdp_router_ipv4 has been transferred to this infra quite
recently, but hasn't been added to it. Fix.
Fixes: 85bf1f5169 ("samples: bpf: Convert xdp_router_ipv4 to XDP samples helper")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220404115451.1116478-1-alexandr.lobakin@intel.com
At the end of the test, we already print out
prog <prog number>: map ids <...> <...>
Value is the number read from kernel through bpf map, further print out
verify map:<map id> val:<...>
will help users to understand the program runs successfully.
Signed-off-by: Song Chen <chensong_2000@189.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1648889828-12417-1-git-send-email-chensong_2000@189.cn
When running xdpsock for a fix duration of time before terminating
using --duration=<n>, there is a race condition that may cause xdpsock
to terminate immediately.
When running for a fixed duration of time the check to determine when to
terminate execution is in is_benchmark_done() and is being executed in
the context of the poller thread,
if (opt_duration > 0) {
unsigned long dt = (get_nsecs() - start_time);
if (dt >= opt_duration)
benchmark_done = true;
}
However start_time is only set after the poller thread have been
created. This leaves a small window when the poller thread is starting
and calls is_benchmark_done() for the first time that start_time is not
yet set. In that case start_time have its initial value of 0 and the
duration check fails as it do not correlate correctly for the
applications start time and immediately sets benchmark_done which in
turn terminates the xdpsock application.
Fix this by setting start_time before creating the poller thread.
Fixes: d3f11b018f ("samples/bpf: xdpsock: Add duration option to specify how long to run")
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220315102948.466436-1-niklas.soderlund@corigine.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-01-24
We've added 80 non-merge commits during the last 14 day(s) which contain
a total of 128 files changed, 4990 insertions(+), 895 deletions(-).
The main changes are:
1) Add XDP multi-buffer support and implement it for the mvneta driver,
from Lorenzo Bianconi, Eelco Chaudron and Toke Høiland-Jørgensen.
2) Add unstable conntrack lookup helpers for BPF by using the BPF kfunc
infra, from Kumar Kartikeya Dwivedi.
3) Extend BPF cgroup programs to export custom ret value to userspace via
two helpers bpf_get_retval() and bpf_set_retval(), from YiFei Zhu.
4) Add support for AF_UNIX iterator batching, from Kuniyuki Iwashima.
5) Complete missing UAPI BPF helper description and change bpf_doc.py script
to enforce consistent & complete helper documentation, from Usama Arif.
6) Deprecate libbpf's legacy BPF map definitions and streamline XDP APIs to
follow tc-based APIs, from Andrii Nakryiko.
7) Support BPF_PROG_QUERY for BPF programs attached to sockmap, from Di Zhu.
8) Deprecate libbpf's bpf_map__def() API and replace users with proper getters
and setters, from Christy Lee.
9) Extend libbpf's btf__add_btf() with an additional hashmap for strings to
reduce overhead, from Kui-Feng Lee.
10) Fix bpftool and libbpf error handling related to libbpf's hashmap__new()
utility function, from Mauricio Vásquez.
11) Add support to BTF program names in bpftool's program dump, from Raman Shukhau.
12) Fix resolve_btfids build to pick up host flags, from Connor O'Brien.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (80 commits)
selftests, bpf: Do not yet switch to new libbpf XDP APIs
selftests, xsk: Fix rx_full stats test
bpf: Fix flexible_array.cocci warnings
xdp: disable XDP_REDIRECT for xdp frags
bpf: selftests: add CPUMAP/DEVMAP selftests for xdp frags
bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest
net: xdp: introduce bpf_xdp_pointer utility routine
bpf: generalise tail call map compatibility check
libbpf: Add SEC name for xdp frags programs
bpf: selftests: update xdp_adjust_tail selftest to include xdp frags
bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature
bpf: introduce frags support to bpf_prog_test_run_xdp()
bpf: move user_size out of bpf_test_init
bpf: add frags support to xdp copy helpers
bpf: add frags support to the bpf_xdp_adjust_tail() API
bpf: introduce bpf_xdp_get_buff_len helper
net: mvneta: enable jumbo frames if the loaded XDP program support frags
bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf program
net: mvneta: add frags support to XDP_TX
xdp: add frags support to xdp_return_{buff/frame}
...
====================
Link: https://lore.kernel.org/r/20220124221235.18993-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
bpf_probe_read_kernel_str() will add a nul terminator to the dst, then
we don't care about if the dst size is big enough. This patch also
replaces the hard-coded 16 with TASK_COMM_LEN to make it grepable.
Link: https://lkml.kernel.org/r/20211120112738.45980-6-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
libbpf bpf_map__def() API is being deprecated, replace samples/bpf's
usage with the appropriate getters and setters.
Signed-off-by: Christy Lee <christylee@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108004218.355761-2-christylee@fb.com
It may be useful to add timestamp for Tx packets for continuous or cyclic
transmit operation. The timestamp and sequence ID of a Tx packet are
stored according to pktgen header format. To enable per-packet timestamp,
use -y|--tstamp option. If timestamp is off, pktgen header is not
included in the UDP payload. This means receiving side can use the magic
number for pktgen for differentiation.
The implementation supports both VLAN tagged and untagged option. By
default, the minimum packet size is set at 64B. However, if VLAN tagged
is on (-V), the minimum packet size is increased to 66B just so to fit
the pktgen_hdr size.
Added hex_dump() into the code path just for future cross-checking.
As before, simply change to "#define DEBUG_HEXDUMP 1" to inspect the
accuracy of TX packet.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211230035447.523177-8-boon.leong.ong@intel.com
When user sets tx-pkt-count and in case where there are invalid Tx frame,
the complete_tx_only_all() process polls indefinitely. So, this patch
adds a time-out mechanism into the process so that the application
can terminate automatically after it retries 3*polling interval duration.
v1->v2:
Thanks to Jesper's and Song Liu's suggestion.
- clean-up git message to remove polling log
- make the Tx time-out retries configurable with 1s granularity
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211230035447.523177-7-boon.leong.ong@intel.com
By default, TX schedule policy is SCHED_OTHER (round-robin time-sharing).
To improve TX cyclic scheduling, we add SCHED_FIFO policy and its priority
by using -W FIFO or --policy=FIFO and -U <PRIO> or --schpri=<PRIO>.
A) From xdpsock --app-stats, for SCHED_OTHER policy:
$ xdpsock -i eth0 -t -N -z -T 1000 -b 16 -C 100000 -a
period min ave max cycle
Cyclic TX 1000000 53507 75334 712642 6250
B) For SCHED_FIFO policy and schpri=50:
$ xdpsock -i eth0 -t -N -z -T 1000 -b 16 -C 100000 -a -W FIFO -U 50
period min ave max cycle
Cyclic TX 1000000 3699 24859 54397 6250
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211230035447.523177-6-boon.leong.ong@intel.com
Tx cycle time is in micro-seconds unit. By combining the batch size (-b M)
and Tx cycle time (-T|--tx-cycle N), xdpsock now can transmit batch-size of
packets every N-us periodically. Cyclic TX operation is not applicable if
--poll mode is used.
To transmit 16 packets every 1ms cycle time for total of 100000 packets
silently:
$ xdpsock -i eth0 -T -N -z -T 1000 -b 16 -C 100000
To print cyclic TX schedule variance stats, use --app-stats|-a:
$ xdpsock -i eth0 -T -N -z -T 1000 -b 16 -C 100000 -a
sock0@eth0:0 txonly xdp-drv
pps pkts 0.00
rx 0 0
tx 0 100000
calls/s count
rx empty polls 0 0
fill fail polls 0 0
copy tx sendtos 0 0
tx wakeup sendtos 0 6254
opt polls 0 0
period min ave max cycle
Cyclic TX 1000000 53507 75334 712642 6250
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211230035447.523177-5-boon.leong.ong@intel.com
User specifies the clock selection by using -w CLOCK or --clock=CLOCK
where CLOCK=[REALTIME, TAI, BOOTTIME, MONOTONIC].
The default CLOCK selection is MONOTONIC.
The implementation of clock selection parsing is borrowed from
iproute2/tc/q_taprio.c
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211230035447.523177-4-boon.leong.ong@intel.com
To set Dest MAC address (-G|--tx-dmac) only:
$ xdpsock -i eth0 -t -N -z -G aa:bb:cc:dd:ee:ff
To set Source MAC address (-H|--tx-smac) only:
$ xdpsock -i eth0 -t -N -z -H 11:22:33:44:55:66
To set both Dest and Source MAC address:
$ xdpsock -i eth0 -t -N -z -G aa:bb:cc:dd:ee:ff \
-H 11:22:33:44:55:66
The default Dest and Source MAC address remain the same as before.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20211230035447.523177-3-boon.leong.ong@intel.com
In multi-queue environment testing, the support for VLAN-tag based
steering is useful. So, this patch adds the capability to add
VLAN tag (VLAN ID and Priority) to the generated Tx frame.
To set the VLAN ID=10 and Priority=2 for Tx only through TxQ=3:
$ xdpsock -i eth0 -t -N -z -q 3 -V -J 10 -K 2
If VLAN ID (-J) and Priority (-K) is set, it default to
VLAN ID = 1
VLAN Priority = 0.
For example, VLAN-tagged Tx only, xdp copy mode through TxQ=1:
$ xdpsock -i eth0 -t -N -c -q 1 -V
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211230035447.523177-2-boon.leong.ong@intel.com
bpf_object__find_program_by_title is going to be deprecated.
Replace use cases of bpf_object__find_program_by_title in samples/bpf/
with bpf_object__for_each_program.
Signed-off-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211214035931.1148209-3-kuifeng@fb.com
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return value directly instead of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cm>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211209080051.421844-1-chi.minghao@zte.com.cn
Clang doesn't have 'stringop-truncation' group like GCC does, and
complains about it when building samples which use xdp_sample_user
infra:
samples/bpf/xdp_sample_user.h:48:32: warning: unknown warning group '-Wstringop-truncation', ignored [-Wunknown-warning-option]
#pragma GCC diagnostic ignored "-Wstringop-truncation"
^
[ repeat ]
Those are harmless, but avoidable when guarding it with ifdef.
I could guard push/pop as well, but this would require one more
ifdef cruft around a single line which I don't think is reasonable.
Fixes: 156f886cf6 ("samples: bpf: Add basic infrastructure for XDP samples")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20211203195004.5803-3-alexandr.lobakin@intel.com
Clang (13) doesn't get the jokes about specifying libraries to link in
cclags of individual .o objects:
clang-13: warning: -lm: 'linker' input unused [-Wunused-command-line-argument]
[ ... ]
LD samples/bpf/xdp_redirect_cpu
LD samples/bpf/xdp_redirect_map_multi
LD samples/bpf/xdp_redirect_map
LD samples/bpf/xdp_redirect
LD samples/bpf/xdp_monitor
/usr/bin/ld: samples/bpf/xdp_sample_user.o: in function `sample_summary_print':
xdp_sample_user.c:(.text+0x84c): undefined reference to `floor'
/usr/bin/ld: xdp_sample_user.c:(.text+0x870): undefined reference to `ceil'
/usr/bin/ld: xdp_sample_user.c:(.text+0x8cf): undefined reference to `floor'
/usr/bin/ld: xdp_sample_user.c:(.text+0x8f3): undefined reference to `ceil'
[ more ]
Specify '-lm' as ldflags for all xdp_sample_user.o users in the main
Makefile and remove it from ccflags of ^ in Makefile.target -- just
like it's done for all other samples. This works with all compilers.
Fixes: 6e1051a54e ("samples: bpf: Convert xdp_monitor to XDP samples helper")
Fixes: b926c55d85 ("samples: bpf: Convert xdp_redirect to XDP samples helper")
Fixes: e531a220cc ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Fixes: bbe65865aa ("samples: bpf: Convert xdp_redirect_map to XDP samples helper")
Fixes: 594a116b2a ("samples: bpf: Convert xdp_redirect_map_multi to XDP samples helper")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20211203195004.5803-2-alexandr.lobakin@intel.com
Replace deprecated APIs with new ones. Also mute source code using
deprecated AF_XDP (xsk.h). Figuring out what to do with all the AF_XDP
stuff is a separate problem that should be solved with its own set of
changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211201232824.3166325-9-andrii@kernel.org
Remove xdp_samples_user.o rule redefinition which generates Makefile
warning and instead override TPROGS_CFLAGS. This seems to work fine when
building inside selftests/bpf.
That was one big head-scratcher before I found that generic
Makefile.target hid this surprising specialization for for xdp_samples_user.o.
Main change is to use actual locally installed libbpf headers.
Also drop printk macro re-definition (not even used!).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211201232824.3166325-8-andrii@kernel.org
Fix the following samples/bpf build error appeared after the
introduction of bpf_map_create() in libbpf:
CC samples/bpf/fds_example.o
samples/bpf/fds_example.c:49:12: error: static declaration of 'bpf_map_create' follows non-static declaration
static int bpf_map_create(void)
^
samples/bpf/libbpf/include/bpf/bpf.h:55:16: note: previous declaration is here
LIBBPF_API int bpf_map_create(enum bpf_map_type map_type,
^
samples/bpf/fds_example.c:82:23: error: too few arguments to function call, expected 6, have 0
fd = bpf_map_create();
~~~~~~~~~~~~~~ ^
samples/bpf/libbpf/include/bpf/bpf.h:55:16: note: 'bpf_map_create' declared here
LIBBPF_API int bpf_map_create(enum bpf_map_type map_type,
^
2 errors generated.
fds_example by accident has a static function with the same name.
It's not worth it to separate a single call into its own function,
so just embed it.
Fixes: 992c422541 ("libbpf: Unify low-level map creation APIs w/ new bpf_map_create()")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20211201164931.47357-1-alexandr.lobakin@intel.com
Since recent Kbuild updates we no longer include files from compiler
directories. However, samples/bpf/hbm_kern.h hasn't been tuned for
this (LLVM 13):
CLANG-bpf samples/bpf/hbm_out_kern.o
In file included from samples/bpf/hbm_out_kern.c:55:
samples/bpf/hbm_kern.h:12:10: fatal error: 'stddef.h' file not found
^~~~~~~~~~
1 error generated.
CLANG-bpf samples/bpf/hbm_edt_kern.o
In file included from samples/bpf/hbm_edt_kern.c:53:
samples/bpf/hbm_kern.h:12:10: fatal error: 'stddef.h' file not found
^~~~~~~~~~
1 error generated.
It is enough to just drop both stdbool.h and stddef.h from includes
to fix those.
Fixes: 04e85bbf71 ("isystem: delete global -isystem compile option")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/bpf/20211115130741.3584-1-alexandr.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit b599015f04 ("samples/bpf: Fix application of sizeof to pointer")
tried to fix a bug where sizeof was incorrectly applied to a pointer instead
of the array string was being copied to, to find the destination buffer size,
but ended up using strlen, which is still incorrect. However, on closer look
ifname_buf has no other use, hence directly use optarg.
Fixes: b599015f04 ("samples/bpf: Fix application of sizeof to pointer")
Fixes: e531a220cc ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20211112020301.528357-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sample_summary_print() uses accumulated period to calculate and display
per-sec averages. This period gets incremented by sampling interval each
time a new sample is formed, and thus equals to the number of samples
collected multiplied by this interval.
However, the totals are being calculated differently, they receive current
sample statistics already divided by the interval gotten as a difference
between sample timestamps for better precision -- in other words, they are
being incremented by the per-sec values each sample.
This leads to the excessive division of summary per-secs when interval != 1
sec. It is obvious pps couldn't become two times lower just from picking a
different sampling interval value:
$ samples/bpf/xdp_redirect_cpu -p xdp_prognum_n1_inverse_qnum -c all
-s -d 6 -i 1
< snip >
Packets received : 2,197,230,321
Average packets/s : 22,887,816
Packets redirected : 2,197,230,472
Average redir/s : 22,887,817
$ samples/bpf/xdp_redirect_cpu -p xdp_prognum_n1_inverse_qnum -c all
-s -d 6 -i 2
< snip >
Packets received : 159,566,498
Average packets/s : 11,397,607
Packets redirected : 159,566,995
Average redir/s : 11,397,642
This can be easily fixed by treating the divisor not as a period, but rather
as a total number of samples, and thus incrementing it by 1 instead of
interval. As a nice side effect, we can now remove so-named argument from a
couple of functions. Let us also create an "alias" for sample_output::rx_cnt::pps
named 'num' using a union since this field is used to store this number (period
previously) as well, and the resulting counter-intuitive code might've been a
reason for this bug.
Fixes: 156f886cf6 ("samples: bpf: Add basic infrastructure for XDP samples")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20211111215703.690-1-alexandr.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-11-01
We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).
The main changes are:
1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.
2) Parallelize bpf test_progs, from Yucong and Andrii.
3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.
4) Improve bpf selftests on s390, from Ilya.
5) bloomfilter bpf map type, from Joanne.
6) Big improvements to JIT tests especially on Mips, from Johan.
7) Support kernel module function calls from bpf, from Kumar.
8) Support typeless and weak ksym in light skeleton, from Kumar.
9) Disallow unprivileged bpf by default, from Pawan.
10) BTF_KIND_DECL_TAG support, from Yonghong.
11) Various bpftool cleanups, from Quentin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
bpf: Factor out helpers for ctx access checking
bpf: Factor out a helper to prepare trampoline for struct_ops prog
selftests, bpf: Fix broken riscv build
riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
tools, build: Add RISC-V to HOSTARCH parsing
riscv, bpf: Increase the maximum number of iterations
selftests, bpf: Add one test for sockmap with strparser
selftests, bpf: Fix test_txmsg_ingress_parser error
...
====================
Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When compiling bpf samples, the following warning appears:
readelf: Error: Missing knowledge of 32-bit reloc types used in DWARF
sections of machine number 247
readelf: Warning: unable to apply unsupported reloc type 10 to section
.debug_info
readelf: Warning: unable to apply unsupported reloc type 1 to section
.debug_info
readelf: Warning: unable to apply unsupported reloc type 10 to section
.debug_info
Same problem was mentioned in commit 2f0921262b ("selftests/bpf:
suppress readelf stderr when probing for BTF support"), let's use
readelf that supports btf.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211021123913.48833-1-pulehui@huawei.com
The coccinelle check report:
"./samples/bpf/xdp_redirect_cpu_user.c:397:32-38:
ERROR: application of sizeof to pointer"
Using the "strlen" to fix it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211012111649.983253-1-davidcomponentone@gmail.com
In samples/bpf/Makefile, libbpf has a FORCE dependency that force it to
be rebuilt. I read this as a way to keep the library up-to-date, given
that we do not have, in samples/bpf, a list of the source files for
libbpf itself. However, a better approach would be to use the
"$(wildcard ...)" function from make, and to have libbpf depend on all
the .c and .h files in its directory. This is what samples/bpf/Makefile
does for bpftool, and also what the BPF selftests' Makefile does for
libbpf.
Let's update the Makefile to avoid rebuilding libbpf all the time (and
bpftool on top of it).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-11-quentin@isovalent.com
API headers from libbpf should not be accessed directly from the source
directory. Instead, they should be exported with "make install_headers".
Make sure that samples/bpf/Makefile installs the headers properly when
building.
The object compiled from and exported by libbpf are now placed into a
subdirectory of sample/bpf/ instead of remaining in tools/lib/bpf/. We
attempt to remove this directory on "make clean". However, the "clean"
target re-enters the samples/bpf/ directory from the root of the
repository ("$(MAKE) -C ../../ M=$(CURDIR) clean"), in such a way that
$(srctree) and $(src) are not defined, making it impossible to use
$(LIBBPF_OUTPUT) and $(LIBBPF_DESTDIR) in the recipe. So we only attempt
to clean $(CURDIR)/libbpf, which is the default value.
Add a dependency on libbpf's headers for the $(TRACE_HELPERS).
We also change the output directory for bpftool, to place the generated
objects under samples/bpf/bpftool/ instead of building in bpftool's
directory directly. Doing so, we make sure bpftool reuses the libbpf
library previously compiled and installed.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-10-quentin@isovalent.com
Update samples/bpf/.gitignore to ignore files generated when building
the samples. Add:
- vmlinux.h
- the generated skeleton files (*.skel.h)
- the samples/bpf/libbpf/ and .../bpftool/ directories, in preparation
of a future commit which introduces a local output directory for
building libbpf and bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-9-quentin@isovalent.com
Replace deprecated bpf_{map,program}__next APIs with newly added
bpf_object__next_{map,program} APIs, so that no compilation warnings
emit.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211003165844.4054931-3-hengqi.chen@gmail.com
Recent-ish versions of make do no longer consider number signs ("#") as
comment symbols when they are inserted inside of a macro reference or in
a function invocation. In such cases, the symbols should not be escaped.
There are a few occurrences of "\#" in libbpf's and samples' Makefiles.
In the former, the backslash is harmless, because grep associates no
particular meaning to the escaped symbol and reads it as a regular "#".
In samples' Makefile, recent versions of make will pass the backslash
down to the compiler, making the probe fail all the time and resulting
in the display of a warning about "make headers_install" being required,
even after headers have been installed.
A similar issue has been addressed at some other locations by commit
9564a8cf42 ("Kbuild: fix # escaping in .cmd files for future Make").
Let's address it for libbpf's and samples' Makefiles in the same
fashion, by using a "$(pound)" variable (pulled from
tools/scripts/Makefile.include for libbpf, or re-defined for the
samples).
Reference for the change in make:
https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57
Fixes: 2f38304127 ("libbpf: Make libbpf_version.h non-auto-generated")
Fixes: 07c3bbdb1a ("samples: bpf: print a warning about headers_install")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211006111049.20708-1-quentin@isovalent.com
libbpf and bpftool have been dual-licensed to facilitate inclusion in software
that is not compatible with GPL2-only (ie: Apache2), but the samples are still
GPL2-only.
Given these files are samples, they get naturally copied around. For example,
it is the case for samples/bpf/bpf_insn.h which was copied into the systemd
tree: https://github.com/systemd/systemd/blob/main/src/shared/linux/bpf_insn.h
Some more context on systemd's needs specifically:
Most of systemd is (L)GPL2-or-later, which means there is no perceived
incompatibility with Apache2 software and can thus be linked with
OpenSSL 3.0. But given this GPL2-only header is included this is currently
not possible. Dual-licensing this header solves this problem for us as we
are scoping a move to OpenSSL 3.0, see:
https://lists.freedesktop.org/archives/systemd-devel/2021-September/046882.html
Dual-license this header as GPL-2.0-only OR BSD-2-Clause to follow the same
licensing used by libbpf and bpftool:
1bc38b8ff6 ("libbpf: relicense libbpf as LGPL-2.1 OR BSD-2-Clause")
907b223651 ("tools: bpftool: dual license all files")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Daniel Mack <daniel@zonque.org>
Acked-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Joe Stringer <joe@ovn.org>
Acked-by: Chenbo Feng <fengc@google.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210923000540.47344-1-luca.boccassi@gmail.com
Generate vmlinux.h only from the in-tree vmlinux, and remove enum
declarations that would cause a build failure in case of version
mismatches.
There are now two options when building the samples:
1. Compile the kernel to use in-tree vmlinux for vmlinux.h
2. Override VMLINUX_BTF for samples using something like this:
make VMLINUX_BTF=/sys/kernel/btf/vmlinux -C samples/bpf
This change was tested with relative builds, e.g. cases like:
* make O=build -C samples/bpf
* make KBUILD_OUTPUT=build -C samples/bpf
* make -C samples/bpf
* cd samples/bpf && make
When a suitable VMLINUX_BTF is not found, the following message is
printed:
/home/kkd/src/linux/samples/bpf/Makefile:333: *** Cannot find a vmlinux
for VMLINUX_BTF at any of " ./vmlinux", build the kernel or set
VMLINUX_BTF variable. Stop.
Fixes: 384b6b3bbf (samples: bpf: Add vmlinux.h generation support)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210928054608.1799021-1-memxor@gmail.com
The ARP table that is dumped when the xdp_router_ipv4 process is launched
has the IP address & MAC address in non-readable network byte order format,
also the alignment is off when printing the table.
Address HwAddress
160000e0 1600005e0001
ff96a8c0 ffffffffffff
faffffef faff7f5e0001
196a8c0 9607871293ea
fb0000e0 fb00005e0001
0 0
196a8c0 9607871293ea
ffff11ac ffffffffffff
faffffef faff7f5e0001
fb0000e0 fb00005e0001
160000e0 1600005e0001
160000e0 1600005e0001
faffffef faff7f5e0001
fb0000e0 fb00005e0001
40011ac 40011ac4202
Fix this by converting the "Address" field from network byte order Hex into
dotted decimal notation IPv4 format and "HwAddress" field from network byte
order Hex into Colon separated Hex format. Also fix the aligntment of the
fields in the ARP table.
Address HwAddress
224.0.0.22 01:00:5e:00:00:16
192.168.150.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
192.168.150.1 ea:93:12:87:07:96
224.0.0.251 01:00:5e:00:00:fb
0.0.0.0 00:00:00:00:00:00
192.168.150.1 ea:93:12:87:07:96
172.17.255.255 ff:ff:ff:ff:ff:ff
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251 01:00:5e:00:00:fb
224.0.0.22 01:00:5e:00:00:16
224.0.0.22 01:00:5e:00:00:16
239.255.255.250 01:00:5e:7f:ff:fa
224.0.0.251 01:00:5e:00:00:fb
172.17.0.4 02:42:ac:11:00:04
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210919080305.173588-2-gokulkumar792@gmail.com
The route table that is dumped when the xdp_router_ipv4 process is launched
has the "Gateway" field in non-readable network byte order format, also the
alignment is off when printing the table.
Destination Gateway Genmask Metric Iface
0.0.0.0 196a8c0 0 0 enp7s0
0.0.0.0 196a8c0 0 0 wlp6s0
169.254.0.0 196a8c0 16 0 enp7s0
172.17.0.0 0 16 0 docker0
192.168.150.0 0 24 0 enp7s0
192.168.150.0 0 24 0 wlp6s0
Fix this by converting the "Gateway" field from network byte order Hex into
dotted decimal notation IPv4 format and "Genmask" from CIDR notation into
dotted decimal notation IPv4 format. Also fix the aligntment of the fields
in the route table.
Destination Gateway Genmask Metric Iface
0.0.0.0 192.168.150.1 0.0.0.0 0 enp7s0
0.0.0.0 192.168.150.1 0.0.0.0 0 wlp6s0
169.254.0.0 192.168.150.1 255.255.0.0 0 enp7s0
172.17.0.0 0.0.0.0 255.255.0.0 0 docker0
192.168.150.0 0.0.0.0 255.255.255.0 0 enp7s0
192.168.150.0 0.0.0.0 255.255.255.0 0 wlp6s0
Signed-off-by: Gokul Sivakumar <gokulkumar792@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210919080305.173588-1-gokulkumar792@gmail.com
While at it, also improve help output when CPU number is greater than
possible.
Fixes: e531a220cc ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210826120910.454081-1-memxor@gmail.com
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper. Also adapt to change of type of mac address map, so that
no resizing is required.
Add a new flag for sample mask that skips priting the
from_device->to_device heading for each line, as xdp_redirect_map_multi
may have two devices but the flow of data may be bidirectional, so the
output would be confusing.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-23-memxor@gmail.com
One of the notable changes is using a BPF_MAP_TYPE_HASH instead of array
map to store mac addresses of devices, as the resizing behavior was
based on max_ifindex, which unecessarily maximized the capacity of map
beyond what was needed.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-22-memxor@gmail.com
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper.
Since get_mac_addr is already provided by XDP samples helper, we drop
it. Also convert to XDP samples helper similar to prior samples to
minimize duplication of code.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-21-memxor@gmail.com
Also update it to use consistent SEC("xdp") and SEC("xdp_devmap")
naming, and use global variable instead of BPF map for copying the mac
address.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-20-memxor@gmail.com
Use the libbpf skeleton facility and other utilities provided by XDP
samples helper.
Similar to xdp_monitor, xdp_redirect_cpu was quite featureful except a
few minor omissions (e.g. redirect errno reporting). All of these have
been moved to XDP samples helper, hence drop the unneeded code and
convert to usage of helpers provided by it.
One of the important changes here is dropping of mprog-disable option,
as we make that the default. Also, we support built-in programs for some
common actions on the packet when it reaches kthread (pass, drop,
redirect to device). If the user still needs to install a custom
program, they can still supply a BPF object, however the program should
be suitably tagged with SEC("xdp_cpumap") annotation so that the
expected attach type is correct when updating our cpumap map element.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-19-memxor@gmail.com
Similar to xdp_monitor_kern, a lot of these BPF programs have been
reimplemented properly consolidating missing features from other XDP
samples. Hence, drop the unneeded code and rename to .bpf.c suffix.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-18-memxor@gmail.com
