Commit Graph

250 Commits

Author SHA1 Message Date
Eric Dumazet
b056b4cd91 icmp: move icmp_global.credit and icmp_global.stamp to per netns storage
Host wide ICMP ratelimiter should be per netns, to provide better isolation.

Following patch in this series makes the sysctl per netns.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-30 11:14:06 -07:00
Eric Dumazet
8c2bd38b95 icmp: change the order of rate limits
ICMP messages are ratelimited :

After the blamed commits, the two rate limiters are applied in this order:

1) host wide ratelimit (icmp_global_allow())

2) Per destination ratelimit (inetpeer based)

In order to avoid side-channels attacks, we need to apply
the per destination check first.

This patch makes the following change :

1) icmp_global_allow() checks if the host wide limit is reached.
   But credits are not yet consumed. This is deferred to 3)

2) The per destination limit is checked/updated.
   This might add a new node in inetpeer tree.

3) icmp_global_consume() consumes tokens if prior operations succeeded.

This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.

As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.

Fixes: c0303efeab ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-30 11:14:06 -07:00
Joel Granados
1c106eb01c net: ipv{6,4}: Remove the now superfluous sentinel elements from ctl_table array
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)

* Remove sentinel element from ctl_table structs.
* Remove the zeroing out of an array element (to make it look like a
  sentinel) in sysctl_route_net_init And ipv6_route_sysctl_init.
  This is not longer needed and is safe after commit c899710fe7
  ("networking: Update to register_net_sysctl_sz") added the array size
  to the ctl_table registration.
* Remove extra sentinel element in the declaration of devinet_vars.
* Removed the "-1" in __devinet_sysctl_register, sysctl_route_net_init,
  ipv6_sysctl_net_init and ipv4_sysctl_init_net that adjusted for having
  an extra empty element when looping over ctl_table arrays
* Replace the for loop stop condition in __addrconf_sysctl_register that
  tests for procname == NULL with one that depends on array size
* Removing the unprivileged user check in ipv6_route_sysctl_init is
  safe as it is replaced by calling ipv6_route_sysctl_table_size;
  introduced in commit c899710fe7 ("networking: Update to
  register_net_sysctl_sz")
* Use a table_size variable to keep the value of ARRAY_SIZE

Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-03 13:29:42 +01:00
Eric Dumazet
e8dfd42c17 ipv6: introduce dst_rt6_info() helper
Instead of (struct rt6_info *)dst casts, we can use :

 #define dst_rt6_info(_ptr) \
         container_of_const(_ptr, struct rt6_info, dst)

Some places needed missing const qualifiers :

ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()

v2: added missing parts (David Ahern)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-29 13:32:01 +01:00
Eric Dumazet
1ac13efd61 ipv6: annotate data-races around np->ucast_oif
np->ucast_oif is read locklessly in some contexts.

Make all accesses to this field lockless, adding appropriate
annotations.

This also makes setsockopt( IPV6_UNICAST_IF ) lockless.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-11 10:59:17 +00:00
Eric Dumazet
d2f011a0bf ipv6: annotate data-races around np->mcast_oif
np->mcast_oif is read locklessly in some contexts.

Make all accesses to this field lockless, adding appropriate
annotations.

This also makes setsockopt( IPV6_MULTICAST_IF ) lockless.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-11 10:59:17 +00:00
Florian Westphal
2b1dc6285c xfrm: pass struct net to xfrm_decode_session wrappers
Preparation patch, extra arg is not used.
No functional changes intended.

This is needed to replace the xfrm session decode functions with
the flow dissector.

skb_flow_dissect() cannot be used as-is, because it attempts to deduce the
'struct net' to use for bpf program fetch from skb->sk or skb->dev, but
xfrm code path can see skbs that have neither sk or dev filled in.

So either flow dissector needs to try harder, e.g. by also trying
skb->dst->dev, or we have to pass the struct net explicitly.

Passing the struct net doesn't look too bad to me, most places
already have it available or can derive it from the output device.

Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/netdev/202309271628.27fd2187-oliver.sang@intel.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2023-10-06 08:31:53 +02:00
Eric Dumazet
1086ca7cce ipv6: lockless IPV6_DONTFRAG implementation
Move np->dontfrag flag to inet->inet_flags to fix data-races.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-15 10:33:47 +01:00
Linus Torvalds
adfd671676 sysctl-6.6-rc1
Long ago we set out to remove the kitchen sink on kernel/sysctl.c arrays and
 placings sysctls to their own sybsystem or file to help avoid merge conflicts.
 Matthew Wilcox pointed out though that if we're going to do that we might as
 well also *save* space while at it and try to remove the extra last sysctl
 entry added at the end of each array, a sentintel, instead of bloating the
 kernel by adding a new sentinel with each array moved.
 
 Doing that was not so trivial, and has required slowing down the moves of
 kernel/sysctl.c arrays and measuring the impact on size by each new move.
 
 The complex part of the effort to help reduce the size of each sysctl is being
 done by the patient work of el señor Don Joel Granados. A lot of this is truly
 painful code refactoring and testing and then trying to measure the savings of
 each move and removing the sentinels. Although Joel already has code which does
 most of this work, experience with sysctl moves in the past shows is we need to
 be careful due to the slew of odd build failures that are possible due to the
 amount of random Kconfig options sysctls use.
 
 To that end Joel's work is split by first addressing the major housekeeping
 needed to remove the sentinels, which is part of this merge request. The rest
 of the work to actually remove the sentinels will be done later in future
 kernel releases.
 
 At first I was only going to send his first 7 patches of his patch series,
 posted 1 month ago, but in retrospect due to the testing the changes have
 received in linux-next and the minor changes they make this goes with the
 entire set of patches Joel had planned: just sysctl house keeping. There are
 networking changes but these are part of the house keeping too.
 
 The preliminary math is showing this will all help reduce the overall build
 time size of the kernel and run time memory consumed by the kernel by about
 ~64 bytes per array where we are able to remove each sentinel in the future.
 That also means there is no more bloating the kernel with the extra ~64 bytes
 per array moved as no new sentinels are created.
 
 Most of this has been in linux-next for about a month, the last 7 patches took
 a minor refresh 2 week ago based on feedback.
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmTuVnMSHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinIckP/imvRlfkO6L0IP7MmJBRPtwY01rsTAKO
 Q14dZ//bG4DVQeGl1FdzrF6hhuLgekU0qW1YDFIWiCXO7CbaxaNBPSUkeW6ReVoC
 R/VHNUPxSR1PWQy1OTJV2t4XKri2sB7ijmUsfsATtISwhei9bggTHEysShtP4tv+
 U87DzhoqMnbYIsfMo49KCqOa1Qm7TmjC1a7WAp6Fph3GJuXAzZR5pXpsd0NtOZ9x
 Ud5RT22icnQpMl7K+yPsqY6XcS5JkgBe/WbSzMAUkYZvBZFBq9t2D+OW5h9TZMhw
 piJWQ9X0Rm7qI2D15mJfXwaOhhyDhWci391hzdJmS6DI0prf6Ma2NFdAWOt/zomI
 uiRujS4bGeBUaK5F4TX2WQ1+jdMtAZ+0FncFnzt4U8q7dzUc91uVCm6iHW3gcfAb
 N7OEg2ZL0gkkgCZHqKxN8wpNQiC2KwnNk+HLAbnL2a/oJYfBtdopQmlxWfrN2hpF
 xxROiENqk483BRdMXDq6DR/gyDZmZWCobXIglSzlqCOjCOcLbDziIJ7pJk83ok09
 h/QnXTYHf9protBq9OIQesgh2pwNzBBLifK84KZLKcb7IbdIKjpQrW5STp04oNGf
 wcGJzEz8tXUe0UKyMM47AcHQGzIy6cdXNLjyF8a+m7rnZzr1ndnMqZyRStZzuQin
 AUg2VWHKPmW9
 =sq2p
 -----END PGP SIGNATURE-----

Merge tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull sysctl updates from Luis Chamberlain:
 "Long ago we set out to remove the kitchen sink on kernel/sysctl.c
  arrays and placings sysctls to their own sybsystem or file to help
  avoid merge conflicts. Matthew Wilcox pointed out though that if we're
  going to do that we might as well also *save* space while at it and
  try to remove the extra last sysctl entry added at the end of each
  array, a sentintel, instead of bloating the kernel by adding a new
  sentinel with each array moved.

  Doing that was not so trivial, and has required slowing down the moves
  of kernel/sysctl.c arrays and measuring the impact on size by each new
  move.

  The complex part of the effort to help reduce the size of each sysctl
  is being done by the patient work of el señor Don Joel Granados. A lot
  of this is truly painful code refactoring and testing and then trying
  to measure the savings of each move and removing the sentinels.
  Although Joel already has code which does most of this work,
  experience with sysctl moves in the past shows is we need to be
  careful due to the slew of odd build failures that are possible due to
  the amount of random Kconfig options sysctls use.

  To that end Joel's work is split by first addressing the major
  housekeeping needed to remove the sentinels, which is part of this
  merge request. The rest of the work to actually remove the sentinels
  will be done later in future kernel releases.

  The preliminary math is showing this will all help reduce the overall
  build time size of the kernel and run time memory consumed by the
  kernel by about ~64 bytes per array where we are able to remove each
  sentinel in the future. That also means there is no more bloating the
  kernel with the extra ~64 bytes per array moved as no new sentinels
  are created"

* tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: Use ctl_table_size as stopping criteria for list macro
  sysctl: SIZE_MAX->ARRAY_SIZE in register_net_sysctl
  vrf: Update to register_net_sysctl_sz
  networking: Update to register_net_sysctl_sz
  netfilter: Update to register_net_sysctl_sz
  ax.25: Update to register_net_sysctl_sz
  sysctl: Add size to register_net_sysctl function
  sysctl: Add size arg to __register_sysctl_init
  sysctl: Add size to register_sysctl
  sysctl: Add a size arg to __register_sysctl_table
  sysctl: Add size argument to init_header
  sysctl: Add ctl_table_size to ctl_table_header
  sysctl: Use ctl_table_header in list_for_each_table_entry
  sysctl: Prefer ctl_table_header in proc_sysctl
2023-08-29 17:39:15 -07:00
Joel Granados
c899710fe7 networking: Update to register_net_sysctl_sz
Move from register_net_sysctl to register_net_sysctl_sz for all the
networking related files. Do this while making sure to mirror the NULL
assignments with a table_size of zero for the unprivileged users.

We need to move to the new function in preparation for when we change
SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro. Failing to do
so would erroneously allow ARRAY_SIZE() to be called on a pointer. We
hold off the SIZE_MAX to ARRAY_SIZE change until we have migrated all
the relevant net sysctl registering functions to register_net_sysctl_sz
in subsequent commits.

An additional size function was added to the following files in order to
calculate the size of an array that is defined in another file:
    include/net/ipv6.h
    net/ipv6/icmp.c
    net/ipv6/route.c
    net/ipv6/sysctl_net_ipv6.c

Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-08-15 15:26:18 -07:00
Guillaume Nault
5bc67a854c ipv6: Constify the sk parameter of several helper functions.
icmpv6_flow_init(), ip6_datagram_flow_key_init() and ip6_mc_hdr() don't
need to modify their sk argument. Make that explicit using const.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14 08:27:33 +01:00
Kuniyuki Iwashima
2aaa8a15de icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev().
With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet that
has the link-local address as src and dst IP and will be forwarded to
an external IP in the IPv6 Ext Hdr.

For example, the script below generates a packet whose src IP is the
link-local address and dst is updated to 11::.

  # for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done
  # python3
  >>> from socket import *
  >>> from scapy.all import *
  >>>
  >>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456"
  >>>
  >>> pkt = IPv6(src=SRC_ADDR, dst=DST_ADDR)
  >>> pkt /= IPv6ExtHdrSegmentRouting(type=4, addresses=["11::", "22::"], segleft=1)
  >>>
  >>> sk = socket(AF_INET6, SOCK_RAW, IPPROTO_RAW)
  >>> sk.sendto(bytes(pkt), (DST_ADDR, 0))

For such a packet, we call ip6_route_input() to look up a route for the
next destination in these three functions depending on the header type.

  * ipv6_rthdr_rcv()
  * ipv6_rpl_srh_rcv()
  * ipv6_srh_rcv()

If no route is found, ip6_null_entry is set to skb, and the following
dst_input(skb) calls ip6_pkt_drop().

Finally, in icmp6_dev(), we dereference skb_rt6_info(skb)->rt6i_idev->dev
as the input device is the loopback interface.  Then, we have to check if
skb_rt6_info(skb)->rt6i_idev is NULL or not to avoid NULL pointer deref
for ip6_null_entry.

BUG: kernel NULL pointer dereference, address: 0000000000000000
 PF: supervisor read access in kernel mode
 PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 157 Comm: python3 Not tainted 6.4.0-11996-gb121d614371c #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503)
Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01
RSP: 0018:ffffc90000003c70 EFLAGS: 00000286
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0
RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18
RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001
R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10
R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0
FS:  00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
 <IRQ>
 ip6_pkt_drop (net/ipv6/route.c:4513)
 ipv6_rthdr_rcv (net/ipv6/exthdrs.c:640 net/ipv6/exthdrs.c:686)
 ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5))
 ip6_input_finish (./include/linux/rcupdate.h:781 net/ipv6/ip6_input.c:483)
 __netif_receive_skb_one_core (net/core/dev.c:5455)
 process_backlog (./include/linux/rcupdate.h:781 net/core/dev.c:5895)
 __napi_poll (net/core/dev.c:6460)
 net_rx_action (net/core/dev.c:6529 net/core/dev.c:6660)
 __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554)
 do_softirq (kernel/softirq.c:454 kernel/softirq.c:441)
 </IRQ>
 <TASK>
 __local_bh_enable_ip (kernel/softirq.c:381)
 __dev_queue_xmit (net/core/dev.c:4231)
 ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:135)
 rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914)
 sock_sendmsg (net/socket.c:725 net/socket.c:748)
 __sys_sendto (net/socket.c:2134)
 __x64_sys_sendto (net/socket.c:2146 net/socket.c:2142 net/socket.c:2142)
 do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f9dc751baea
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffe98712c38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007ffe98712cf8 RCX: 00007f9dc751baea
RDX: 0000000000000060 RSI: 00007f9dc6460b90 RDI: 0000000000000003
RBP: 00007f9dc56e8be0 R08: 00007ffe98712d70 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f9dc6af5d1b
 </TASK>
Modules linked in:
CR2: 0000000000000000
 ---[ end trace 0000000000000000 ]---
RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503)
Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01
RSP: 0018:ffffc90000003c70 EFLAGS: 00000286
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0
RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18
RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001
R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10
R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0
FS:  00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled

Fixes: 4832c30d54 ("net: ipv6: put host and anycast routes on device with address")
Reported-by: Wang Yufen <wangyufen@huawei.com>
Closes: https://lore.kernel.org/netdev/c41403a9-c2f6-3b7e-0c96-e1901e605cd0@huawei.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-08 10:08:54 +01:00
Mahesh Bandewar
7ab75456be ipv6: add icmpv6_error_anycast_as_unicast for ICMPv6
ICMPv6 error packets are not sent to the anycast destinations and this
prevents things like traceroute from working. So create a setting similar
to ECHO when dealing with Anycast sources (icmpv6_echo_ignore_anycast).

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230419013238.2691167-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-20 20:07:50 -07:00
Eric Dumazet
ac03694bc0 ipv6: icmp6: add drop reason support to icmpv6_echo_reply()
Change icmpv6_echo_reply() to return a drop reason.

For the moment, return NOT_SPECIFIED or SKB_CONSUMED.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-20 08:54:23 +00:00
Eric Dumazet
545dbcd124 ipv6: icmp6: add drop reason support to ndisc_rcv()
Creates three new drop reasons:

SKB_DROP_REASON_IPV6_NDISC_FRAG: invalid frag (suppress_frag_ndisc).

SKB_DROP_REASON_IPV6_NDISC_HOP_LIMIT: invalid hop limit.

SKB_DROP_REASON_IPV6_NDISC_BAD_CODE: invalid NDISC icmp6 code.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-13 19:55:32 -08:00
Eric Dumazet
30c89bad3e ipv6: icmp6: add drop reason support to icmpv6_notify()
Accurately reports what happened in icmpv6_notify() when handling
a packet.

This makes use of the new IPV6_BAD_EXTHDR drop reason.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-13 19:55:32 -08:00
Jiapeng Chong
bc61761394 ipv6: ICMPV6: Use swap() instead of open coding it
Swap is a function interface that provides exchange function. To avoid
code duplication, we can use swap function.

./net/ipv6/icmp.c:344:25-26: WARNING opportunity for swap().

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3896
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230131063456.76302-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-01 19:55:41 -08:00
Jamie Bainbridge
d0941130c9 icmp: Add counters for rate limits
There are multiple ICMP rate limiting mechanisms:

* Global limits: net.ipv4.icmp_msgs_burst/icmp_msgs_per_sec
* v4 per-host limits: net.ipv4.icmp_ratelimit/ratemask
* v6 per-host limits: net.ipv6.icmp_ratelimit/ratemask

However, when ICMP output is limited, there is no way to tell
which limit has been hit or even if the limits are responsible
for the lack of ICMP output.

Add counters for each of the cases above. As we are within
local_bh_disable(), use the __INC stats variant.

Example output:

 # nstat -sz "*RateLimit*"
 IcmpOutRateLimitGlobal          134                0.0
 IcmpOutRateLimitHost            770                0.0
 Icmp6OutRateLimitHost           84                 0.0

Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Suggested-by: Abhishek Rawal <rawal.abhishek92@gmail.com>
Link: https://lore.kernel.org/r/273b32241e6b7fdc5c609e6f5ebc68caf3994342.1674605770.git.jamie.bainbridge@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-26 10:52:18 +01:00
Kuniyuki Iwashima
4a2f7083cc icmp: Fix data-races around sysctl_icmp_echo_enable_probe.
While reading sysctl_icmp_echo_enable_probe, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: d329ea5bd8 ("icmp: add response to RFC 8335 PROBE messages")
Fixes: 1fd07f33c3 ("ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messages")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-13 12:56:49 +01:00
Menglong Dong
1ad6d548e2 net: icmp: introduce function icmpv6_param_prob_reason()
In order to add the skb drop reasons support to icmpv6_param_prob(),
introduce the function icmpv6_param_prob_reason() and make
icmpv6_param_prob() an inline call to it. This new function will be
used in the following patches.

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13 13:09:57 +01:00
Menglong Dong
b384c95a86 net: icmp: add skb drop reasons to icmp protocol
Replace kfree_skb() used in icmp_rcv() and icmpv6_rcv() with
kfree_skb_reason().

In order to get the reasons of the skb drops after icmp message handle,
we change the return type of 'handler()' in 'struct icmp_control' from
'bool' to 'enum skb_drop_reason'. This may change its original
intention, as 'false' means failure, but 'SKB_NOT_DROPPED_YET' means
success now. Therefore, all 'handler' and the call of them need to be
handled. Following 'handler' functions are involved:

icmp_unreach()
icmp_redirect()
icmp_echo()
icmp_timestamp()
icmp_discard()

And following new drop reasons are added:

SKB_DROP_REASON_ICMP_CSUM
SKB_DROP_REASON_INVALID_PROTO

The reason 'INVALID_PROTO' is introduced for the case that the packet
doesn't follow rfc 1122 and is dropped. This is not a common case, and
I believe we can locate the problem from the data in the packet. For now,
this 'INVALID_PROTO' is used for the icmp broadcasts with wrong types.

Maybe there should be a document file for these reasons. For example,
list all the case that causes the 'UNHANDLED_PROTO' and 'INVALID_PROTO'
drop reason. Therefore, users can locate their problems according to the
document.

Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-11 10:38:37 +01:00
Eric Dumazet
6a17b961ec ipv6: do not use per netns icmp sockets
Back in linux-2.6.25 (commit 98c6d1b261 "[NETNS]: Make icmpv6_sk per namespace.",
we added private per-cpu/per-netns ipv6 icmp sockets.

This adds memory and cpu costs, which do not seem needed.
Now typical servers have 256 or more cores, this adds considerable
tax to netns users.

icmp sockets are used from BH context, are not receiving packets,
and do not store any persistent state but the 'struct net' pointer.

icmpv6_xmit_lock() already makes sure to lock the chosen per-cpu
socket.

This patch has a considerable impact on the number of netns
that the worker thread in cleanup_net() can dismantle per second,
because ip6mr_sk_done() is no longer called, meaning we no longer
acquire the rtnl mutex, competing with other threads adding new netns.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-25 11:25:21 +00:00
Andrew Lunn
e41294408c icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
RFC8754 says:

ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain.  The invoking packet in the ICMP error
message may contain an SRH.  Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.

For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required.  The following logic is used to determine the destination
address for use by protocol-error handlers.

*  Walk all extension headers of the invoking IPv6 packet to the
   routing extension header preceding the upper-layer header.

   -  If routing header is type 4 Segment Routing Header (SRH)

      o  The SID at Segment List[0] may be used as the destination
         address of the invoking packet.

Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:17:35 +00:00
Andreas Roeseler
1fd07f33c3 ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messages
This patch builds off of commit 2b246b2569
and adds functionality to respond to ICMPV6 PROBE requests.

Add icmp_build_probe function to construct PROBE requests for both
ICMPV4 and ICMPV6.

Modify icmpv6_rcv to detect ICMPV6 PROBE messages and call the
icmpv6_echo_reply handler.

Modify icmpv6_echo_reply to build a PROBE response message based on the
queried interface.

This patch has been tested using a branch of the iputils git repo which can
be found here: https://github.com/Juniper-Clinic-2020/iputils/tree/probe-request

Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28 14:29:45 -07:00
Andreas Roeseler
314332023b icmp: ICMPV6: pass RFC 8335 reply messages to ping_rcv
The current icmp_rcv function drops all unknown ICMP types, including
ICMP_EXT_ECHOREPLY (type 43). In order to parse Extended Echo Reply messages, we have
to pass these packets to the ping_rcv function, which does not do any
other filtering and passes the packet to the designated socket.

Pass incoming RFC 8335 ICMP Extended Echo Reply packets to the ping_rcv
handler instead of discarding the packet.

Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13 14:38:01 -07:00
Eric Dumazet
a6175633a2 ipv6: convert elligible sysctls to u8
Convert most sysctls that can fit in a byte.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-31 14:48:20 -07:00
Taehee Yoo
f185de28d9 mld: add new workqueues for process mld events
When query/report packets are received, mld module processes them.
But they are processed under BH context so it couldn't use sleepable
functions. So, in order to switch context, the two workqueues are
added which processes query and report event.

In the struct inet6_dev, mc_{query | report}_queue are added so it
is per-interface queue.
And mc_{query | report}_work are workqueue structure.

When the query or report event is received, skb is queued to proper
queue and worker function is scheduled immediately.
Workqueues and queues are protected by spinlock, which is
mc_{query | report}_lock, and worker functions are protected by RTNL.

Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26 15:14:56 -07:00
Jason A. Donenfeld
ee576c47db net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending
The icmp{,v6}_send functions make all sorts of use of skb->cb, casting
it with IPCB or IP6CB, assuming the skb to have come directly from the
inet layer. But when the packet comes from the ndo layer, especially
when forwarded, there's no telling what might be in skb->cb at that
point. As a result, the icmp sending code risks reading bogus memory
contents, which can result in nasty stack overflows such as this one
reported by a user:

    panic+0x108/0x2ea
    __stack_chk_fail+0x14/0x20
    __icmp_send+0x5bd/0x5c0
    icmp_ndo_send+0x148/0x160

In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read
from it. The optlen parameter there is of particular note, as it can
induce writes beyond bounds. There are quite a few ways that can happen
in __ip_options_echo. For example:

    // sptr/skb are attacker-controlled skb bytes
    sptr = skb_network_header(skb);
    // dptr/dopt points to stack memory allocated by __icmp_send
    dptr = dopt->__data;
    // sopt is the corrupt skb->cb in question
    if (sopt->rr) {
        optlen  = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data
        soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data
	// this now writes potentially attacker-controlled data, over
	// flowing the stack:
        memcpy(dptr, sptr+sopt->rr, optlen);
    }

In the icmpv6_send case, the story is similar, but not as dire, as only
IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is
worse than the iif case, but it is passed to ipv6_find_tlv, which does
a bit of bounds checking on the value.

This is easy to simulate by doing a `memset(skb->cb, 0x41,
sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by
good fortune and the rarity of icmp sending from that context that we've
avoided reports like this until now. For example, in KASAN:

    BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0
    Write of size 38 at addr ffff888006f1f80e by task ping/89
    CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5
    Call Trace:
     dump_stack+0x9a/0xcc
     print_address_description.constprop.0+0x1a/0x160
     __kasan_report.cold+0x20/0x38
     kasan_report+0x32/0x40
     check_memory_region+0x145/0x1a0
     memcpy+0x39/0x60
     __ip_options_echo+0xa0e/0x12b0
     __icmp_send+0x744/0x1700

Actually, out of the 4 drivers that do this, only gtp zeroed the cb for
the v4 case, while the rest did not. So this commit actually removes the
gtp-specific zeroing, while putting the code where it belongs in the
shared infrastructure of icmp{,v6}_ndo_send.

This commit fixes the issue by passing an empty IPCB or IP6CB along to
the functions that actually do the work. For the icmp_send, this was
already trivial, thanks to __icmp_send providing the plumbing function.
For icmpv6_send, this required a tiny bit of refactoring to make it
behave like the v4 case, after which it was straight forward.

Fixes: a2b78e9b2c ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs")
Reported-by: SinYu <liuxyon@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23 11:29:52 -08:00
Linus Torvalds
ca5b877b6c selinux/stable-5.11 PR 20201214
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl/YBtEUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNnwA/9Ek8DG/1t8CEoJxpoRvwovQxNo+bi
 0rCT9vqvx9PeCwoZi/0Vp6oKmpE1HADvbeB/+e00VrbLYnzE3oRY6VkpjoZRofKS
 vc0/MzHSFxFUR1OTHwCefcXlPLK+bfitQbX5jEMeVyQCXNXXIrN7CnJf1LmCeLTR
 kQBPlEN9lt7HyNVAi34FhOD/TQbWnFHgl2z5puffgri6cWnc+TALKMYytUZ+rYex
 NYndDJW5b3g5kTat2eErn0FruxfzloGs0xMIiWb+z2i9kl41D+dkKPdAN7idqCSC
 Jv0nJP/bDftzA0wOe9szmGaLQzu7YnCN5kiWcSspatZVnon42Cy/tp9tiuPGLRFU
 XtelDfpyX6o3CLN0tX7LQEO+GYxPzvM6iaR2OrsChWPozUIIR3TLQg7jJN4bvNKl
 TR6gCGZCoAeS5JLNGjzVKxT/oKQY+tCLLlYXQdQY6swNFi3EKmPr+K1D9lgm98fO
 f3d1QmWiZZNmtxxoVogT0qoQYjkfgpnm3dVx813Vt+lwHlVpHGMEPpO27iD3/RYb
 w2yWOJaGKwMD8iL0l+Cm6CPW0/nE5FFISQjWgC8b4Vgxlyan6+L9eViqGICkrUQ2
 Edo0i1YFFZ4utHYkDf1VYBbJ+36KyCtdktgLAcbgnePiPB3E1XBsXTIIStSUIbVQ
 iEbTkBlsCG4GIeU=
 =6Cqb
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull selinux updates from Paul Moore:
 "While we have a small number of SELinux patches for v5.11, there are a
  few changes worth highlighting:

   - Change the LSM network hooks to pass flowi_common structs instead
     of the parent flowi struct as the LSMs do not currently need the
     full flowi struct and they do not have enough information to use it
     safely (missing information on the address family).

     This patch was discussed both with Herbert Xu (representing team
     netdev) and James Morris (representing team
     LSMs-other-than-SELinux).

   - Fix how we handle errors in inode_doinit_with_dentry() so that we
     attempt to properly label the inode on following lookups instead of
     continuing to treat it as unlabeled.

   - Tweak the kernel logic around allowx, auditallowx, and dontauditx
     SELinux policy statements such that the auditx/dontauditx are
     effective even without the allowx statement.

  Everything passes our test suite"

* tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
  selinux: Fix fall-through warnings for Clang
  selinux: drop super_block backpointer from superblock_security_struct
  selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
  selinux: allow dontauditx and auditallowx rules to take effect without allowx
  selinux: fix error initialization in inode_doinit_with_dentry()
2020-12-16 11:01:04 -08:00
Paul Moore
3df98d7921 lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
As pointed out by Herbert in a recent related patch, the LSM hooks do
not have the necessary address family information to use the flowi
struct safely.  As none of the LSMs currently use any of the protocol
specific flowi information, replace the flowi pointers with pointers
to the address family independent flowi_common struct.

Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-11-23 18:36:21 -05:00
Hangbin Liu
2efdaaaf88 IPv6: reply ICMP error if the first fragment don't include all headers
Based on RFC 8200, Section 4.5 Fragment Header:

  -  If the first fragment does not include all headers through an
     Upper-Layer header, then that fragment should be discarded and
     an ICMP Parameter Problem, Code 3, message should be sent to
     the source of the fragment, with the Pointer field set to zero.

Checking each packet header in IPv6 fast path will have performance impact,
so I put the checking in ipv6_frag_rcv().

As the packet may be any kind of L4 protocol, I only checked some common
protocols' header length and handle others by (offset + 1) > skb->len.
Also use !(frag_off & htons(IP6_OFFSET)) to catch atomic fragments
(fragmented packet with only one fragment).

When send ICMP error message, if the 1st truncated fragment is ICMP message,
icmp6_send() will break as is_ineligible() return true. So I added a check
in is_ineligible() to let fragment packet with nexthdr ICMP but no ICMP header
return false.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-31 13:16:02 -07:00
Linus Torvalds
9ff9b0d392 networking changes for the 5.10 merge window
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
 traversal in common container configs and improving TCP back-pressure.
 Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
 
 Expand netlink policy support and improve policy export to user space.
 (Ge)netlink core performs request validation according to declared
 policies. Expand the expressiveness of those policies (min/max length
 and bitmasks). Allow dumping policies for particular commands.
 This is used for feature discovery by user space (instead of kernel
 version parsing or trial and error).
 
 Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
 
 Allow more than 255 IPv4 multicast interfaces.
 
 Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
 packets of TCPv6.
 
 In Multi-patch TCP (MPTCP) support concurrent transmission of data
 on multiple subflows in a load balancing scenario. Enhance advertising
 addresses via the RM_ADDR/ADD_ADDR options.
 
 Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
 
 Allow more calls to same peer in RxRPC.
 
 Support two new Controller Area Network (CAN) protocols -
 CAN-FD and ISO 15765-2:2016.
 
 Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
 kernel problem.
 
 Add TC actions for implementing MPLS L2 VPNs.
 
 Improve nexthop code - e.g. handle various corner cases when nexthop
 objects are removed from groups better, skip unnecessary notifications
 and make it easier to offload nexthops into HW by converting
 to a blocking notifier.
 
 Support adding and consuming TCP header options by BPF programs,
 opening the doors for easy experimental and deployment-specific
 TCP option use.
 
 Reorganize TCP congestion control (CC) initialization to simplify life
 of TCP CC implemented in BPF.
 
 Add support for shipping BPF programs with the kernel and loading them
 early on boot via the User Mode Driver mechanism, hence reusing all the
 user space infra we have.
 
 Support sleepable BPF programs, initially targeting LSM and tracing.
 
 Add bpf_d_path() helper for returning full path for given 'struct path'.
 
 Make bpf_tail_call compatible with bpf-to-bpf calls.
 
 Allow BPF programs to call map_update_elem on sockmaps.
 
 Add BPF Type Format (BTF) support for type and enum discovery, as
 well as support for using BTF within the kernel itself (current use
 is for pretty printing structures).
 
 Support listing and getting information about bpf_links via the bpf
 syscall.
 
 Enhance kernel interfaces around NIC firmware update. Allow specifying
 overwrite mask to control if settings etc. are reset during update;
 report expected max time operation may take to users; support firmware
 activation without machine reboot incl. limits of how much impact
 reset may have (e.g. dropping link or not).
 
 Extend ethtool configuration interface to report IEEE-standard
 counters, to limit the need for per-vendor logic in user space.
 
 Adopt or extend devlink use for debug, monitoring, fw update
 in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
 mv88e6xxx, dpaa2-eth).
 
 In mlxsw expose critical and emergency SFP module temperature alarms.
 Refactor port buffer handling to make the defaults more suitable and
 support setting these values explicitly via the DCBNL interface.
 
 Add XDP support for Intel's igb driver.
 
 Support offloading TC flower classification and filtering rules to
 mscc_ocelot switches.
 
 Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
 fixed interval period pulse generator and one-step timestamping in
 dpaa-eth.
 
 Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
 offload.
 
 Add Lynx PHY/PCS MDIO module, and convert various drivers which have
 this HW to use it. Convert mvpp2 to split PCS.
 
 Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
 7-port Mediatek MT7531 IP.
 
 Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
 and wcn3680 support in wcn36xx.
 
 Improve performance for packets which don't require much offloads
 on recent Mellanox NICs by 20% by making multiple packets share
 a descriptor entry.
 
 Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
 subtree to drivers/net. Move MDIO drivers out of the phy directory.
 
 Clean up a lot of W=1 warnings, reportedly the actively developed
 subsections of networking drivers should now build W=1 warning free.
 
 Make sure drivers don't use in_interrupt() to dynamically adapt their
 code. Convert tasklets to use new tasklet_setup API (sadly this
 conversion is not yet complete).
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S
 IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81
 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U
 Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh
 r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E
 iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy
 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F
 mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl
 wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe
 owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp
 HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP
 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc=
 =bc1U
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...
2020-10-15 18:42:13 -07:00
Mathieu Desnoyers
272928d1cd ipv6/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2)
As per RFC4443, the destination address field for ICMPv6 error messages
is copied from the source address field of the invoking packet.

In configurations with Virtual Routing and Forwarding tables, looking up
which routing table to use for sending ICMPv6 error messages is
currently done by using the destination net_device.

If the source and destination interfaces are within separate VRFs, or
one in the global routing table and the other in a VRF, looking up the
source address of the invoking packet in the destination interface's
routing table will fail if the destination interface's routing table
contains no route to the invoking packet's source address.

One observable effect of this issue is that traceroute6 does not work in
the following cases:

- Route leaking between global routing table and VRF
- Route leaking between VRFs

Use the source device routing table when sending ICMPv6 error
messages.

[ In the context of ipv4, it has been pointed out that a similar issue
  may exist with ICMP errors triggered when forwarding between network
  namespaces. It would be worthwhile to investigate whether ipv6 has
  similar issues, but is outside of the scope of this investigation. ]

[ Testing shows that similar issues exist with ipv6 unreachable /
  fragmentation needed messages.  However, investigation of this
  additional failure mode is beyond this investigation's scope. ]

Link: https://tools.ietf.org/html/rfc4443
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-14 17:14:23 -07:00
Al Viro
8d5930dfb7 skb_copy_and_csum_bits(): don't bother with the last argument
it's always 0

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-20 15:45:13 -04:00
David S. Miller
71930d6102 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
All conflicts seemed rather trivial, with some guidance from
Saeed Mameed on the tc_ct.c one.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-11 00:46:00 -07:00
Willem de Bruijn
0da7536fb4 ip: Fix SO_MARK in RST, ACK and ICMP packets
When no full socket is available, skbs are sent over a per-netns
control socket. Its sk_mark is temporarily adjusted to match that
of the real (request or timewait) socket or to reflect an incoming
skb, so that the outgoing skb inherits this in __ip_make_skb.

Introduction of the socket cookie mark field broke this. Now the
skb is set through the cookie and cork:

<caller>		# init sockc.mark from sk_mark or cmsg
ip_append_data
  ip_setup_cork		# convert sockc.mark to cork mark
ip_push_pending_frames
  ip_finish_skb
    __ip_make_skb	# set skb->mark to cork mark

But I missed these special control sockets. Update all callers of
__ip(6)_make_skb that were originally missed.

For IPv6, the same two icmp(v6) paths are affected. The third
case is not, as commit 92e55f412c ("tcp: don't annotate
mark on control socket from tcp_v6_send_response()") replaced
the ctl_sk->sk_mark with passing the mark field directly as a
function argument. That commit predates the commit that
introduced the bug.

Fixes: c6af0c227a ("ip: support SO_MARK cmsg")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reported-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 17:38:30 -07:00
Eric Dumazet
cc7a21b6fb ipv6: icmp6: avoid indirect call for icmpv6_send()
If IPv6 is builtin, we do not need an expensive indirect call
to reach icmp6_send().

v2: put inline keyword before the type to avoid sparse warnings.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19 13:41:59 -07:00
Tim Stallard
b93cfb9cd3 net: icmp6: do not select saddr from iif when route has prefsrc set
Since commit fac6fce9bd ("net: icmp6: provide input address for
traceroute6") ICMPv6 errors have source addresses from the ingress
interface. However, this overrides when source address selection is
influenced by setting preferred source addresses on routes.

This can result in ICMP errors being lost to upstream BCP38 filters
when the wrong source addresses are used, breaking path MTU discovery
and traceroute.

This patch sets the modified source address selection to only take place
when the route used has no prefsrc set.

It can be tested with:

ip link add v1 type veth peer name v2
ip netns add test
ip netns exec test ip link set lo up
ip link set v2 netns test
ip link set v1 up
ip netns exec test ip link set v2 up
ip addr add 2001:db8::1/64 dev v1 nodad
ip addr add 2001:db8::3 dev v1 nodad
ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad
ip netns exec test ip route add unreachable 2001:db8:1::1
ip netns exec test ip addr add 2001:db8:100::1 dev lo
ip netns exec test ip route add 2001:db8::1 dev v2 src 2001:db8:100::1
ip route add 2001:db8:1000::1 via 2001:db8::2
traceroute6 -s 2001:db8::1 2001:db8:1000::1
traceroute6 -s 2001:db8::3 2001:db8:1000::1
ip netns delete test

Output before:
$ traceroute6 -s 2001:db8::1 2001:db8:1000::1
traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets
 1  2001:db8::2 (2001:db8::2)  0.843 ms !N  0.396 ms !N  0.257 ms !N
$ traceroute6 -s 2001:db8::3 2001:db8:1000::1
traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets
 1  2001:db8::2 (2001:db8::2)  0.772 ms !N  0.257 ms !N  0.357 ms !N

After:
$ traceroute6 -s 2001:db8::1 2001:db8:1000::1
traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets
 1  2001:db8:100::1 (2001:db8:100::1)  8.885 ms !N  0.310 ms !N  0.174 ms !N
$ traceroute6 -s 2001:db8::3 2001:db8:1000::1
traceroute to 2001:db8:1000::1 (2001:db8:1000::1), 30 hops max, 80 byte packets
 1  2001:db8::2 (2001:db8::2)  1.403 ms !N  0.205 ms !N  0.313 ms !N

Fixes: fac6fce9bd ("net: icmp6: provide input address for traceroute6")
Signed-off-by: Tim Stallard <code@timstallard.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07 18:25:10 -07:00
Joe Perches
a8eceea84a inet: Use fallthrough;
Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/

And by hand:

net/ipv6/ip6_fib.c has a fallthrough comment outside of an #ifdef block
that causes gcc to emit a warning if converted in-place.

So move the new fallthrough; inside the containing #ifdef/#endif too.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 15:55:00 -07:00
Francesco Ruggeri
fac6fce9bd net: icmp6: provide input address for traceroute6
traceroute6 output can be confusing, in that it shows the address
that a router would use to reach the sender, rather than the address
the packet used to reach the router.
Consider this case:

        ------------------------ N2
         |                    |
       ------              ------  N3  ----
       | R1 |              | R2 |------|H2|
       ------              ------      ----
         |                    |
        ------------------------ N1
                  |
                 ----
                 |H1|
                 ----

where H1's default route is through R1, and R1's default route is
through R2 over N2.
traceroute6 from H1 to H2 shows R2's address on N1 rather than on N2.

The script below can be used to reproduce this scenario.

traceroute6 output without this patch:

traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets
 1  2000:101::1 (2000:101::1)  0.036 ms  0.008 ms  0.006 ms
 2  2000:101::2 (2000:101::2)  0.011 ms  0.008 ms  0.007 ms
 3  2000:103::4 (2000:103::4)  0.013 ms  0.010 ms  0.009 ms

traceroute6 output with this patch:

traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets
 1  2000:101::1 (2000:101::1)  0.056 ms  0.019 ms  0.006 ms
 2  2000:102::2 (2000:102::2)  0.013 ms  0.008 ms  0.008 ms
 3  2000:103::4 (2000:103::4)  0.013 ms  0.009 ms  0.009 ms

#!/bin/bash
#
#        ------------------------ N2
#         |                    |
#       ------              ------  N3  ----
#       | R1 |              | R2 |------|H2|
#       ------              ------      ----
#         |                    |
#        ------------------------ N1
#                  |
#                 ----
#                 |H1|
#                 ----
#
# N1: 2000:101::/64
# N2: 2000:102::/64
# N3: 2000:103::/64
#
# R1's host part of address: 1
# R2's host part of address: 2
# H1's host part of address: 3
# H2's host part of address: 4
#
# For example:
# the IPv6 address of R1's interface on N2 is 2000:102::1/64
#
# Nets are implemented by macvlan interfaces (bridge mode) over
# dummy interfaces.
#

# Create net namespaces
ip netns add host1
ip netns add host2
ip netns add rtr1
ip netns add rtr2

# Create nets
ip link add net1 type dummy; ip link set net1 up
ip link add net2 type dummy; ip link set net2 up
ip link add net3 type dummy; ip link set net3 up

# Add interfaces to net1, move them to their nemaspaces
ip link add link net1 dev host1net1 type macvlan mode bridge
ip link set host1net1 netns host1
ip link add link net1 dev rtr1net1 type macvlan mode bridge
ip link set rtr1net1 netns rtr1
ip link add link net1 dev rtr2net1 type macvlan mode bridge
ip link set rtr2net1 netns rtr2

# Add interfaces to net2, move them to their nemaspaces
ip link add link net2 dev rtr1net2 type macvlan mode bridge
ip link set rtr1net2 netns rtr1
ip link add link net2 dev rtr2net2 type macvlan mode bridge
ip link set rtr2net2 netns rtr2

# Add interfaces to net3, move them to their nemaspaces
ip link add link net3 dev rtr2net3 type macvlan mode bridge
ip link set rtr2net3 netns rtr2
ip link add link net3 dev host2net3 type macvlan mode bridge
ip link set host2net3 netns host2

# Configure interfaces and routes in host1
ip netns exec host1 ip link set lo up
ip netns exec host1 ip link set host1net1 up
ip netns exec host1 ip -6 addr add 2000:101::3/64 dev host1net1
ip netns exec host1 ip -6 route add default via 2000:101::1

# Configure interfaces and routes in rtr1
ip netns exec rtr1 ip link set lo up
ip netns exec rtr1 ip link set rtr1net1 up
ip netns exec rtr1 ip -6 addr add 2000:101::1/64 dev rtr1net1
ip netns exec rtr1 ip link set rtr1net2 up
ip netns exec rtr1 ip -6 addr add 2000:102::1/64 dev rtr1net2
ip netns exec rtr1 ip -6 route add default via 2000:102::2
ip netns exec rtr1 sysctl net.ipv6.conf.all.forwarding=1

# Configure interfaces and routes in rtr2
ip netns exec rtr2 ip link set lo up
ip netns exec rtr2 ip link set rtr2net1 up
ip netns exec rtr2 ip -6 addr add 2000:101::2/64 dev rtr2net1
ip netns exec rtr2 ip link set rtr2net2 up
ip netns exec rtr2 ip -6 addr add 2000:102::2/64 dev rtr2net2
ip netns exec rtr2 ip link set rtr2net3 up
ip netns exec rtr2 ip -6 addr add 2000:103::2/64 dev rtr2net3
ip netns exec rtr2 sysctl net.ipv6.conf.all.forwarding=1

# Configure interfaces and routes in host2
ip netns exec host2 ip link set lo up
ip netns exec host2 ip link set host2net3 up
ip netns exec host2 ip -6 addr add 2000:103::4/64 dev host2net3
ip netns exec host2 ip -6 route add default via 2000:103::2

# Ping host2 from host1
ip netns exec host1 ping6 -c5 2000:103::4

# Traceroute host2 from host1
ip netns exec host1 traceroute6 2000:103::4

# Delete nets
ip link del net3
ip link del net2
ip link del net1

# Delete namespaces
ip netns del rtr2
ip netns del rtr1
ip netns del host2
ip netns del host1

Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Original-patch-by: Honggang Xu <hxu@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03 17:26:53 -08:00
Eric Dumazet
a346abe051 ipv6: icmp: allow flowlabel reflection in echo replies
Extend flowlabel_reflect bitmask to allow conditional
reflection of incoming flowlabels in echo replies.

Note this has precedence against auto flowlabels.

Add flowlabel_reflect enum to replace hard coded
values.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01 10:54:51 -07:00
David S. Miller
13091aa305 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Honestly all the conflicts were simple overlapping changes,
nothing really interesting to report.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17 20:20:36 -07:00
Stephen Suryaputra
e1ae5c2ea4 vrf: Increment Icmp6InMsgs on the original netdev
Get the ingress interface and increment ICMP counters based on that
instead of skb->dev when the the dev is a VRF device.

This is a follow up on the following message:
https://www.spinics.net/lists/netdev/msg560268.html

v2: Avoid changing skb->dev since it has unintended effect for local
    delivery (David Ahern).
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12 11:00:11 -07:00
David S. Miller
a6cdeeb16b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07 11:00:14 -07:00
Eric Dumazet
2789c14d19 ipv6: icmp: use this_cpu_read() in icmpv6_sk()
In general, this_cpu_read(*X) is faster than *this_cpu_ptr(X)

Also remove the inline attibute, totally useless.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-03 14:57:41 -07:00
Thomas Gleixner
2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Stephen Suryaputra
0bc1998544 ipv6: Add rate limit mask for ICMPv6 messages
To make ICMPv6 closer to ICMPv4, add ratemask parameter. Since the ICMP
message types use larger numeric values, a simple bitmask doesn't fit.
I use large bitmap. The input and output are the in form of list of
ranges. Set the default to rate limit all error messages but Packet Too
Big. For Packet Too Big, use ratemask instead of hard-coded.

There are functions where icmpv6_xrlim_allow() and icmpv6_global_allow()
aren't called. This patch only adds them to icmpv6_echo_reply().

Rate limiting error messages is mandated by RFC 4443 but RFC 4890 says
that it is also acceptable to rate limit informational messages. Thus,
I removed the current hard-coded behavior of icmpv6_mask_allow() that
doesn't rate limit informational messages.

v2: Add dummy function proc_do_large_bitmap() if CONFIG_PROC_SYSCTL
    isn't defined, expand the description in ip-sysctl.txt and remove
    unnecessary conditional before kfree().
v3: Inline the bitmap instead of dynamically allocated. Still is a
    pointer to it is needed because of the way proc_do_large_bitmap work.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-18 16:58:37 -07:00
Stephen Suryaputra
0b03a5ca8b ipv6: Add icmp_echo_ignore_anycast for ICMPv6
In addition to icmp_echo_ignore_multicast, there is a need to also
prevent responding to pings to anycast addresses for security.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-20 16:29:37 -07:00
Stephen Suryaputra
03f1eccc7a ipv6: Add icmp_echo_ignore_multicast support for ICMPv6
IPv4 has icmp_echo_ignore_broadcast to prevent responding to broadcast pings.
IPv6 needs a similar mechanism.

v1->v2:
- Remove NET_IPV6_ICMP_ECHO_IGNORE_MULTICAST.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19 14:29:51 -07:00
Kefeng Wang
75efc250d2 ipv6: icmp: use percpu allocation
Use percpu allocation for the ipv6.icmp_sk.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 21:57:26 -08:00