Currently, the behavior of zswap.writeback wrt. the cgroup hierarchy
seems a bit odd. Unlike zswap.max, it doesn't honor the value from parent
cgroups. This surfaced when people tried to globally disable zswap
writeback, i.e. reserve physical swap space only for hibernation [1] -
disabling zswap.writeback only for the root cgroup results in subcgroups
with zswap.writeback=1 still performing writeback.
The inconsistency became more noticeable after I introduced the
MemoryZSwapWriteback= systemd unit setting [2] for controlling the knob.
The patch assumed that the kernel would enforce the value of parent
cgroups. It could probably be workarounded from systemd's side, by going
up the slice unit tree and inheriting the value. Yet I think it's more
sensible to make it behave consistently with zswap.max and friends.
[1] https://wiki.archlinux.org/title/Power_management/Suspend_and_hibernate#Disable_zswap_writeback_to_use_the_swap_space_only_for_hibernation
[2] https://github.com/systemd/systemd/pull/31734
Link: https://lkml.kernel.org/r/20240823162506.12117-1-me@yhndnzj.com
Fixes: 501a06fe8e ("zswap: memcontrol: implement zswap writeback disabling")
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 73f576c04b ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against concurrency and can be run concurrently for
different memcgs when they hit their refcnt to zero. Fix that.
We have been seeing list_lru based kernel crashes at a low frequency in
our fleet for a long time. These crashes were in different part of
list_lru code including list_lru_add(), list_lru_del() and reparenting
code. Upon further inspection, it looked like for a given object (dentry
and inode), the super_block's list_lru didn't have list_lru_one for the
memcg of that object. The initial suspicions were either the object is
not allocated through kmem_cache_alloc_lru() or somehow
memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but
returned success. No evidence were found for these cases.
Looking more deeply, we started seeing situations where valid memcg's id
is not present in mem_cgroup_idr and in some cases multiple valid memcgs
have same id and mem_cgroup_idr is pointing to one of them. So, the most
reasonable explanation is that these situations can happen due to race
between multiple idr_remove() calls or race between
idr_alloc()/idr_replace() and idr_remove(). These races are causing
multiple memcgs to acquire the same ID and then offlining of one of them
would cleanup list_lrus on the system for all of them. Later access from
other memcgs to the list_lru cause crashes due to missing list_lru_one.
Link: https://lkml.kernel.org/r/20240802235822.1830976-1-shakeel.butt@linux.dev
Fixes: 73f576c04b ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's a lot of math, and there is nothing memcontrol specific about it.
This makes it easier to use inside of the drm cgroup controller.
[akpm@linux-foundation.org: fix kerneldoc, per Jeff Johnson]
Link: https://lkml.kernel.org/r/20240703112510.36424-1-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
CONFIG_MEMCG_KMEM used to be a user-visible option for whether slab
tracking is enabled. It has been default-enabled and equivalent to
CONFIG_MEMCG for almost a decade. We've only grown more kernel memory
accounting sites since, and there is no imaginable cgroup usecase going
forward that wants to track user pages but not the multitude of
user-drivable kernel allocations.
Link: https://lkml.kernel.org/r/20240701153148.452230-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on
flags when freeing, yet the flags shown are not bad: PG_locked had been
set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from
deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN
symptoms implying double free by deferred split and large folio migration.
6.7 commit 9bcef5973e ("mm: memcg: fix split queue list crash when large
folio migration") was right to fix the memcg-dependent locking broken in
85ce2c517a ("memcontrol: only transfer the memcg data for migration"),
but missed a subtlety of deferred_split_scan(): it moves folios to its own
local list to work on them without split_queue_lock, during which time
folio->_deferred_list is not empty, but even the "right" lock does nothing
to secure the folio and the list it is on.
Fortunately, deferred_split_scan() is careful to use folio_try_get(): so
folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable()
while the old folio's reference count is temporarily frozen to 0 - adding
such a freeze in the !mapping case too (originally, folio lock and
unmapping and no swap cache left an anon folio unreachable, so no freezing
was needed there: but the deferred split queue offers a way to reach it).
Link: https://lkml.kernel.org/r/29c83d1a-11ca-b6c9-f92e-6ccb322af510@google.com
Fixes: 9bcef5973e ("mm: memcg: fix split queue list crash when large folio migration")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently it uses WARN_ON_ONCE() if seq_buf overflows when user reads
memory.stat, the only advantage of WARN_ON_ONCE is that the splat is so
verbose that it gets noticed. And also it panics the system if
panic_on_warn is enabled. It seems like the warning is just an over
reaction and a simple pr_warn should just achieve the similar effect.
Link: https://lkml.kernel.org/r/20240628072333.2496527-1-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both the end of memory_stat_format() and memcg_stat_format() will call
WARN_ON_ONCE(seq_buf_has_overflowed()). However, memory_stat_format() is
the only caller of memcg_stat_format(), when memcg is on the default
hierarchy, seq_buf_has_overflowed() will be executed twice, so remove the
redundant one.
Link: https://lkml.kernel.org/r/20240626094232.2432891-1-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are only few memcg1-specific struct mem_cgroup's members accesses
left in mm/memcontrol.c. Let's guard them with the CONFIG_MEMCG_V1 config
option.
Link: https://lkml.kernel.org/r/20240628210317.272856-6-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Gather all memcg1-specific struct mem_cgroup's members initialization in a
new memcg1_memcg_init() function, defined in mm/memcontrol-v1.c.
Obviously, if CONFIG_MEMCG_V1 is not set, there is no need to initialize
these fields, so the function becomes trivial.
Link: https://lkml.kernel.org/r/20240628210317.272856-5-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Put cgroup v1-specific code in mem_cgroup_print_oom_meminfo() under
CONFIG_MEMCG_V1.
Link: https://lkml.kernel.org/r/20240628210317.272856-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move out the legacy cgroup v1 socket memory accounting code into
mm/memcontrol-v1.c.
This commit introduces three new functions: memcg1_tcpmem_active(),
memcg1_charge_skmem() and memcg1_uncharge_skmem(), which contain all
cgroup v1-specific code and become trivial if CONFIG_MEMCG_V1 isn't set.
Note, that !!memcg->tcpmem_pressure check in
mem_cgroup_under_socket_pressure() can't be easily moved into
memcontrol-v1.h without including memcontrol-v1.h from memcontrol.h which
isn't a good idea, so it's better to just #ifdef it.
Link: https://lkml.kernel.org/r/20240628210317.272856-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: memcg: put cgroup v1-specific memcg data under
CONFIG_MEMCG_V1".
This patchset puts all cgroup v1's members of struct mem_cgroup, struct
mem_cgroup_per_node and struct task_struct under the CONFIG_MEMCG_V1
config option. If cgroup v1 support is not required (and it's true for
many cgroup users these days), it allows to save a bit of memory and
compile out some code, some of which is on relatively hot paths. It also
structures the code a bit better by grouping cgroup v1-specific stuff in
one place.
This patch (of 9):
memcg_account_kmem() consists of a trivial statistics change via
mod_memcg_state() call and a relatively large memcg1-specific part.
Let's factor out the mod_memcg_state() call and move the rest into the
mm/memcontrol-v1.c file. Also rename memcg_account_kmem() into
memcg1_account_kmem() for consistency.
Link: https://lkml.kernel.org/r/20240628210317.272856-1-roman.gushchin@linux.dev
Link: https://lkml.kernel.org/r/20240628210317.272856-2-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allow proactive reclaimers to submit an additional swappiness=<val>
argument to memory.reclaim. This overrides the global or per-memcg
swappiness setting for that reclaim attempt.
For example:
echo "2M swappiness=0" > /sys/fs/cgroup/memory.reclaim
will perform reclaim on the rootcg with a swappiness setting of 0 (no
swap) regardless of the vm.swappiness sysctl setting.
Userspace proactive reclaimers use the memory.reclaim interface to trigger
reclaim. The memory.reclaim interface does not allow for any way to
effect the balance of file vs anon during proactive reclaim. The only
approach is to adjust the vm.swappiness setting. However, there are a few
reasons we look to control the balance of file vs anon during proactive
reclaim, separately from reactive reclaim:
* Swapout should be limited to manage SSD write endurance. In near-OOM
situations we are fine with lots of swap-out to avoid OOMs. As these
are typically rare events, they have relatively little impact on write
endurance. However, proactive reclaim runs continuously and so its
impact on SSD write endurance is more significant. Therefore it is
desireable to control swap-out for proactive reclaim separately from
reactive reclaim
* Some userspace OOM killers like systemd-oomd[1] support OOM killing on
swap exhaustion. This makes sense if the swap exhaustion is triggered
due to reactive reclaim but less so if it is triggered due to proactive
reclaim (e.g. one could see OOMs when free memory is ample but anon is
just particularly cold). Therefore, it's desireable to have proactive
reclaim reduce or stop swap-out before the threshold at which OOM
killing occurs.
In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness
before writes to memory.reclaim[2]. This has been in production for
nearly two years and has addressed our needs to control proactive vs
reactive reclaim behavior but is still not ideal for a number of reasons:
* vm.swappiness is a global setting, adjusting it can race/interfere
with other system administration that wishes to control vm.swappiness.
In our case, we need to disable Senpai before adjusting vm.swappiness.
* vm.swappiness is stateful - so a crash or restart of Senpai can leave
a misconfigured setting. This requires some additional management to
record the "desired" setting and ensure Senpai always adjusts to it.
With this patch, we avoid these downsides of adjusting vm.swappiness
globally.
[1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html
[2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598
Link: https://lkml.kernel.org/r/20240103164841.2800183-3-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yue Zhao <findns94@gmail.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Put legacy cgroup v1 memory controller code under a new CONFIG_MEMCG_V1
config option. The option is turned off by default. Nobody except those
who are still using cgroup v1 should turn it on.
If the option is not set, memory controller can still be mounted under
cgroup v1, but none of memcg-specific control files are present.
Please note, that not all cgroup v1's memory controller code is guarded
yet (but most of it), it's a subject for some follow-up work.
Thanks to Michal Hocko for providing a better Kconfig option description.
[roman.gushchin@linux.dev: better config option description provided by Michal]
Link: https://lkml.kernel.org/r/ZnxXNtvqllc9CDoo@google.com
Link: https://lkml.kernel.org/r/20240625005906.106920-14-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename memcg_oom_recover() into memcg1_oom_recover() for consistency with
other memory cgroup v1-related functions.
Move the declaration in mm/memcontrol-v1.h to be nearby other memcg v1 oom
handling functions.
Link: https://lkml.kernel.org/r/20240625005906.106920-10-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cgroup v1 supports a complicated OOM handling in userspace mechanism,
which is not supported by cgroup v2. Let's move the corresponding code
into memcontrol-v1.c.
Aside from mechanical code movement this patch introduces two new
functions: memcg1_oom_prepare() and memcg1_oom_finish(). Those are
implementing cgroup v1-specific parts of the common memcg OOM handling
path.
Link: https://lkml.kernel.org/r/20240625005906.106920-9-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename memcg_check_events() into memcg1_check_events() for consistency
with other cgroup v1-specific functions.
Link: https://lkml.kernel.org/r/20240625005906.106920-8-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cgroup v1's memory controller contains a pretty complicated event
notifications mechanism which is not used on cgroup v2. Let's move the
corresponding code into memcontrol-v1.c.
Please, note, that mem_cgroup_event_ratelimit() remains in memcontrol.c,
otherwise it would require exporting too many details on memcg stats
outside of memcontrol.c.
Link: https://lkml.kernel.org/r/20240625005906.106920-7-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename exported function related to the charge move to have the memcg1_
prefix.
Link: https://lkml.kernel.org/r/20240625005906.106920-6-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unlike the legacy cgroup v1 memory controller, cgroup v2 memory controller
doesn't support moving charged pages between cgroups.
It's a fairly large and complicated code which created a number of
problems in the past. Let's move this code into memcontrol-v1.c. It
shaves off 1k lines from memcontrol.c. It's also another step towards
making the legacy memory controller code optionally compiled.
Link: https://lkml.kernel.org/r/20240625005906.106920-5-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename exported function related to the softlimit reclaim to have memcg1_
prefix.
Link: https://lkml.kernel.org/r/20240625005906.106920-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Soft limits are cgroup v1-specific and are not supported by cgroup v2, so
let's move the corresponding code into memcontrol-v1.c.
Aside from simple moving the code, this commits introduces a trivial
memcg1_soft_limit_reset() function to reset soft limits and also moves the
global soft limit tree initialization code into a new memcg1_init()
function.
It also moves corresponding declarations shared between memcontrol.c and
memcontrol-v1.c into mm/memcontrol-v1.h.
Link: https://lkml.kernel.org/r/20240625005906.106920-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mem_cgroup_migrate() will clear the memcg data of the old folio,
therefore, the callers must make sure the old folio is no longer on the
LRU list, otherwise the old folio can not get the correct lruvec object
without the memcg data, which could lead to potential problems [1].
Thus adding a VM_BUG_ON_FOLIO() to catch this issue.
[1] https://lore.kernel.org/all/5ab860d8ee987955e917748f9d6da525d3b52690.1718326003.git.baolin.wang@linux.alibaba.com/
Link: https://lkml.kernel.org/r/66d181c41b7ced35dbd39ffd3f5774a11aef266a.1718327124.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for introducing a similar function, rename
is_zswap_enabled() to use zswap_* prefix like other zswap functions.
Link: https://lkml.kernel.org/r/20240611024516.1375191-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page_memcg() only called by mod_memcg_page_state(), so squash it to
cleanup page_memcg().
Link: https://lkml.kernel.org/r/20240524014950.187805-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently we use one swap_address_space for every 64M chunk to reduce lock
contention, this is like having a set of smaller swap files inside one
swap device. But when doing swap cache look up or insert, we are still
using the offset of the whole large swap device. This is OK for
correctness, as the offset (key) is unique.
But Xarray is specially optimized for small indexes, it creates the radix
tree levels lazily to be just enough to fit the largest key stored in one
Xarray. So we are wasting tree nodes unnecessarily.
For 64M chunk it should only take at most 3 levels to contain everything.
But if we are using the offset from the whole swap device, the offset
(key) value will be way beyond 64M, and so will the tree level.
Optimize this by using a new helper swap_cache_index to get a swap entry's
unique offset in its own 64M swap_address_space.
I see a ~1% performance gain in benchmark and actual workload with high
memory pressure.
Test with `time memhog 128G` inside a 8G memcg using 128G swap (ramdisk
with SWP_SYNCHRONOUS_IO dropped, tested 3 times, results are stable. The
test result is similar but the improvement is smaller if
SWP_SYNCHRONOUS_IO is enabled, as swap out path can never skip swap
cache):
Before:
6.07user 250.74system 4:17.26elapsed 99%CPU (0avgtext+0avgdata 8373376maxresident)k
0inputs+0outputs (55major+33555018minor)pagefaults 0swaps
After (1.8% faster):
6.08user 246.09system 4:12.58elapsed 99%CPU (0avgtext+0avgdata 8373248maxresident)k
0inputs+0outputs (54major+33555027minor)pagefaults 0swaps
Similar result with MySQL and sysbench using swap:
Before:
94055.61 qps
After (0.8% faster):
94834.91 qps
Radix tree slab usage is also very slightly lower.
Link: https://lkml.kernel.org/r/20240521175854.96038-12-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When testing shmem swapin, I encountered the warning below on my machine.
The reason is that replacing an old shmem folio with a new one causes
mem_cgroup_migrate() to clear the old folio's memcg data. As a result,
the old folio cannot get the correct memcg's lruvec needed to remove
itself from the LRU list when it is being freed. This could lead to
possible serious problems, such as LRU list crashes due to holding the
wrong LRU lock, and incorrect LRU statistics.
To fix this issue, we can fallback to use the mem_cgroup_replace_folio()
to replace the old shmem folio.
[ 5241.100311] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5d9960
[ 5241.100317] head: order:4 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 5241.100319] flags: 0x17fffe0000040068(uptodate|lru|head|swapbacked|node=0|zone=2|lastcpupid=0x3ffff)
[ 5241.100323] raw: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000
[ 5241.100325] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 5241.100326] head: 17fffe0000040068 fffffdffd6687948 fffffdffd69ae008 0000000000000000
[ 5241.100327] head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 5241.100328] head: 17fffe0000000204 fffffdffd6665801 ffffffffffffffff 0000000000000000
[ 5241.100329] head: 0000000a00000010 0000000000000000 00000000ffffffff 0000000000000000
[ 5241.100330] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled())
[ 5241.100338] ------------[ cut here ]------------
[ 5241.100339] WARNING: CPU: 19 PID: 78402 at include/linux/memcontrol.h:775 folio_lruvec_lock_irqsave+0x140/0x150
[...]
[ 5241.100374] pc : folio_lruvec_lock_irqsave+0x140/0x150
[ 5241.100375] lr : folio_lruvec_lock_irqsave+0x138/0x150
[ 5241.100376] sp : ffff80008b38b930
[...]
[ 5241.100398] Call trace:
[ 5241.100399] folio_lruvec_lock_irqsave+0x140/0x150
[ 5241.100401] __page_cache_release+0x90/0x300
[ 5241.100404] __folio_put+0x50/0x108
[ 5241.100406] shmem_replace_folio+0x1b4/0x240
[ 5241.100409] shmem_swapin_folio+0x314/0x528
[ 5241.100411] shmem_get_folio_gfp+0x3b4/0x930
[ 5241.100412] shmem_fault+0x74/0x160
[ 5241.100414] __do_fault+0x40/0x218
[ 5241.100417] do_shared_fault+0x34/0x1b0
[ 5241.100419] do_fault+0x40/0x168
[ 5241.100420] handle_pte_fault+0x80/0x228
[ 5241.100422] __handle_mm_fault+0x1c4/0x440
[ 5241.100424] handle_mm_fault+0x60/0x1f0
[ 5241.100426] do_page_fault+0x120/0x488
[ 5241.100429] do_translation_fault+0x4c/0x68
[ 5241.100431] do_mem_abort+0x48/0xa0
[ 5241.100434] el0_da+0x38/0xc0
[ 5241.100436] el0t_64_sync_handler+0x68/0xc0
[ 5241.100437] el0t_64_sync+0x14c/0x150
[ 5241.100439] ---[ end trace 0000000000000000 ]---
[baolin.wang@linux.alibaba.com: remove less helpful comments, per Matthew]
Link: https://lkml.kernel.org/r/ccad3fe1375b468ebca3227b6b729f3eaf9d8046.1718423197.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/3c11000dd6c1df83015a8321a859e9775ebbc23e.1718266112.git.baolin.wang@linux.alibaba.com
Fixes: 85ce2c517a ("memcontrol: only transfer the memcg data for migration")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The assert was introduced in the commit cited below as an insurance that
the semantic is the same after the local_irq_save() has been removed and
the function has been made static.
The original requirement to disable interrupt was due the modification
of per-CPU counters which require interrupts to be disabled because the
counter update operation is not atomic and some of the counters are
updated from interrupt context.
All callers of __mod_objcg_mlstate() acquire a lock
(memcg_stock.stock_lock) which disables interrupts on !PREEMPT_RT and
the lockdep assert is satisfied. On PREEMPT_RT the interrupts are not
disabled and the assert triggers.
The safety of the counter update is already ensured by
VM_WARN_ON_IRQS_ENABLED() which is part of __mod_memcg_lruvec_state() and
does not require yet another check.
Remove the lockdep assert from __mod_objcg_mlstate().
Link: https://lkml.kernel.org/r/20240528141341.rz_rytN_@linutronix.de
Fixes: 91882c1617 ("memcg: simple cleanup of stats update functions")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit 857f21397f ("memcg, oom: remove unnecessary check in
mem_cgroup_oom_synchronize()"), memcg_oom_gfp_mask and memcg_oom_order are
no longer used any more.
Link: https://lkml.kernel.org/r/20240509032628.1217652-1-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Benjamin Segall <bsegall@google.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_mem_cgroup_per_node_info() returns int that doesn't map to any errno
error code. The only existing caller doesn't really need an error code so
change the function to return bool (true on success) because this is
slightly less confusing and more consistent with the other code.
Link: https://lkml.kernel.org/r/20240507132324.1158510-1-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A memcg pointer in the per-cpu stock can be accessed by
drain_all_stock() and consume_stock() in parallel, causing a potential
race, which is believed to e harmless.
KCSAN shows this data-race clearly in the splat below:
BUG: KCSAN: data-race in drain_all_stock.part.0 / try_charge_memcg
write to 0xffff88903f8b0788 of 4 bytes by task 35901 on cpu 2:
try_charge_memcg (mm/memcontrol.c:2323 mm/memcontrol.c:2746)
__mem_cgroup_charge (mm/memcontrol.c:7287 mm/memcontrol.c:7301)
do_anonymous_page (mm/memory.c:1054 mm/memory.c:4375 mm/memory.c:4433)
__handle_mm_fault (mm/memory.c:3878 mm/memory.c:5300 mm/memory.c:5441)
handle_mm_fault (mm/memory.c:5606)
do_user_addr_fault (arch/x86/mm/fault.c:1363)
exc_page_fault (./arch/x86/include/asm/irqflags.h:37
./arch/x86/include/asm/irqflags.h:72
arch/x86/mm/fault.c:1513
arch/x86/mm/fault.c:1563)
asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
read to 0xffff88903f8b0788 of 4 bytes by task 287 on cpu 27:
drain_all_stock.part.0 (mm/memcontrol.c:2433)
mem_cgroup_css_offline (mm/memcontrol.c:5398 mm/memcontrol.c:5687)
css_killed_work_fn (kernel/cgroup/cgroup.c:5521 kernel/cgroup/cgroup.c:5794)
process_one_work (kernel/workqueue.c:3254)
worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416)
kthread (kernel/kthread.c:388)
ret_from_fork (arch/x86/kernel/process.c:147)
ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
value changed: 0x00000014 -> 0x00000013
This happens because drain_all_stock() is reading stock->nr_pages, while
consume_stock() might be updating the same address, causing a potential
data-race.
Make the shared addresses bulletproof regarding to reads and writes,
similarly to what stock->cached_objcg and stock->cached.
Annotate all accesses to stock->nr_pages with READ_ONCE()/WRITE_ONCE().
Link: https://lkml.kernel.org/r/20240501095420.679208-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The memcg stats update functions can take arbitrary integer but the only
input which make sense is enum memcg_stat_item and we don't want these
functions to be called with arbitrary integer, so replace the parameter
type with enum memcg_stat_item and compiler will be able to warn if memcg
stat update functions are called with incorrect index value.
Link: https://lkml.kernel.org/r/20240501172617.678560-9-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To reduce memory usage by the memcg events and stats, the kernel uses
indirection table and only allocate stats and events which are being used
by the memcg code. To make this more robust, let's add warnings where
unexpected stats and events indexes are used.
Link: https://lkml.kernel.org/r/20240501172617.678560-8-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are no memcg specific stats for NR_SHMEM_PMDMAPPED and
NR_FILE_PMDMAPPED. Let's remove them.
Link: https://lkml.kernel.org/r/20240501172617.678560-6-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
At the moment, the amount of memory allocated for stats related structs in
the mem_cgroup corresponds to the size of enum node_stat_item. However
not all fields in enum node_stat_item have corresponding memcg stats. So,
let's use indirection mechanism similar to the one used for memcg vmstats
management.
For a given x86_64 config, the size of stats with and without patch is:
structs size in bytes w/o with
struct lruvec_stats 1128 648
struct lruvec_stats_percpu 752 432
struct memcg_vmstats 1832 1352
struct memcg_vmstats_percpu 1280 960
The memory savings are further compounded by the fact that these structs
are allocated for each cpu and for each node. To be precise, for each
memcg the memory saved would be:
Memory saved = ((21 * 3 * NR_NODES) + (21 * 2 * NR_NODES * NR_CPUS) +
(21 * 3) + (21 * 2 * NR_CPUS)) * sizeof(long)
Where 21 is the number of fields eliminated.
Link: https://lkml.kernel.org/r/20240501172617.678560-5-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The percpu memory used by memcg's memory statistics is already accounted.
For consistency, let's enable accounting for vmstats and lruvec stats as
well.
Link: https://lkml.kernel.org/r/20240501172617.678560-4-shakeel.butt@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To decouple the dependency of lruvec_stats on NR_VM_NODE_STAT_ITEMS, we
need to dynamically allocate lruvec_stats in the mem_cgroup_per_node
structure. Also move the definition of lruvec_stats_percpu and
lruvec_stats and related functions to the memcontrol.c to facilitate later
patches. No functional changes in the patch.
Link: https://lkml.kernel.org/r/20240501172617.678560-3-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memcg: reduce memory consumption by memcg stats", v4.
Most of the memory overhead of a memcg object is due to memcg stats
maintained by the kernel. Since stats updates happen in performance
critical codepaths, the stats are maintained per-cpu and numa specific
stats are maintained per-node * per-cpu. This drastically increase the
overhead on large machines i.e. large of CPUs and multiple numa nodes.
This patch series tries to reduce the overhead by at least not allocating
the memory for stats which are not memcg specific.
This patch (of 8):
mem_cgroup_events_index is a translation table to get the right index of
the memcg relevant entry for the general vm_event_item. At the moment, it
is defined as integer array. However on a typical system the max entry of
vm_event_item (NR_VM_EVENT_ITEMS) is 113, so we don't need to use int as
storage type of the array. For now just use int8_t as type and add a
BUILD_BUG_ON().
Another benefit of this change is that the translation table fits in 2
cachelines while previously it would require 8 cachelines (assuming 64
bytes cacheline).
Link: https://lkml.kernel.org/r/20240501172617.678560-1-shakeel.butt@linux.dev
Link: https://lkml.kernel.org/r/20240501172617.678560-2-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A data-race issue in memcg rstat occurs when two distinct code paths
access the same 4-byte region concurrently. KCSAN detection triggers the
following BUG as a result.
BUG: KCSAN: data-race in __count_memcg_events / mem_cgroup_css_rstat_flush
write to 0xffffe8ffff98e300 of 4 bytes by task 5274 on cpu 17:
mem_cgroup_css_rstat_flush (mm/memcontrol.c:5850)
cgroup_rstat_flush_locked (kernel/cgroup/rstat.c:243 (discriminator 7))
cgroup_rstat_flush (./include/linux/spinlock.h:401 kernel/cgroup/rstat.c:278)
mem_cgroup_flush_stats.part.0 (mm/memcontrol.c:767)
memory_numa_stat_show (mm/memcontrol.c:6911)
<snip>
read to 0xffffe8ffff98e300 of 4 bytes by task 410848 on cpu 27:
__count_memcg_events (mm/memcontrol.c:725 mm/memcontrol.c:962)
count_memcg_event_mm.part.0 (./include/linux/memcontrol.h:1097 ./include/linux/memcontrol.h:1120)
handle_mm_fault (mm/memory.c:5483 mm/memory.c:5622)
<snip>
value changed: 0x00000029 -> 0x00000000
The race occurs because two code paths access the same "stats_updates"
location. Although "stats_updates" is a per-CPU variable, it is remotely
accessed by another CPU at
cgroup_rstat_flush_locked()->mem_cgroup_css_rstat_flush(), leading to the
data race mentioned.
Considering that memcg_rstat_updated() is in the hot code path, adding a
lock to protect it may not be desirable, especially since this variable
pertains solely to statistics.
Therefore, annotating accesses to stats_updates with READ/WRITE_ONCE() can
prevent KCSAN splats and potential partial reads/writes.
Link: https://lkml.kernel.org/r/20240424125940.2410718-1-leitao@debian.org
Fixes: 9cee7e8ef3 ("mm: memcg: optimize parent iteration in memcg_rstat_updated()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mod_memcg_lruvec_state() is never called from outside of memcontrol.c and
with always irq disabled. So, replace it with the irq disabled version
and add an assert that irq is disabled in the caller.
Similarly mod_objcg_state() is not called from outside of memcontrol.c, so
simply make it static and change it's name to __mod_objcg_state().
Link: https://lkml.kernel.org/r/20240420232505.2768428-1-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The hooks make multiple calls to functions in mm/memcontrol.c, including
to th current_obj_cgroup() marked __always_inline. It might be faster to
make a single call to the hook in mm/memcontrol.c instead. The hooks also
don't use almost anything from mm/slub.c. obj_full_size() can move with
the hooks and cache_vmstat_idx() to the internal mm/slab.h
Link: https://lkml.kernel.org/r/20240326-slab-memcg-v3-2-d85d2563287a@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memcg_kmem hooks refactoring", v3.
This patch (of 2):
The MEMCG_KMEM integration with slab currently relies on two hooks during
allocation. memcg_slab_pre_alloc_hook() determines the objcg and charges
it, and memcg_slab_post_alloc_hook() assigns the objcg pointer to the
allocated object(s).
As Linus pointed out, this is unnecessarily complex. Failing to charge
due to memcg limits should be rare, so we can optimistically allocate the
object(s) and do the charging together with assigning the objcg pointer in
a single post_alloc hook. In the rare case the charging fails, we can
free the object(s) back.
This simplifies the code (no need to pass around the objcg pointer) and
potentially allows to separate charging from allocation in cases where
it's common that the allocation would be immediately freed, and the memcg
handling overhead could be saved.
[vbabka@suse.cz: fix call to memcg_alloc_abort_single()]
Link: https://lkml.kernel.org/r/4af50be2-4109-45e5-8a36-2136252a635e@suse.cz
[roman.gushchin@linux.dev: comment fixup]
Link: https://lkml.kernel.org/r/Zg2LsNm6twOmG69l@P9FQF9L96D.corp.robot.car
Link: https://lkml.kernel.org/r/20240326-slab-memcg-v3-0-d85d2563287a@suse.cz
Link: https://lkml.kernel.org/r/20240326-slab-memcg-v3-1-d85d2563287a@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=whYOOdM7jWy5jdrAm8LxcgCMFyk2bt8fYYvZzM4U-zAQA@mail.gmail.com/
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Various significant MM patches".
These patches all interact in annoying ways which make it tricky to send
them out in any way other than a big batch, even though there's not really
an overarching theme to connect them.
The big effects of this patch series are:
- folio_test_hugetlb() becomes reliable, even when called without a
page reference
- We free up PG_slab, and we could always use more page flags
- We no longer need to check PageSlab before calling page_mapcount()
This patch (of 9):
For compound pages which are at least order-2 (and hence have a
deferred_list), initialise it and then we can check at free that the page
is not part of a deferred list. We recently found this useful to rule out
a source of corruption.
[peterx@redhat.com: always initialise folio->_deferred_list]
Link: https://lkml.kernel.org/r/20240417211836.2742593-2-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240321142448.1645400-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20240321142448.1645400-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently slab pages can store only vectors of obj_cgroup pointers in
page->memcg_data. Introduce slabobj_ext structure to allow more data to
be stored for each slab object. Wrap obj_cgroup into slabobj_ext to
support current functionality while allowing to extend slabobj_ext in the
future.
Link: https://lkml.kernel.org/r/20240321163705.3067592-7-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
9 out of 16 callers perform a NULL check before calling obj_cgroup_put().
Move the NULL check in the function, similar to mem_cgroup_put(). The
unlikely() NULL check in current_objcg_update() was left alone to avoid
dropping the unlikey() annotation as this a fast path.
Link: https://lkml.kernel.org/r/20240316015803.2777252-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All users have been converted to mem_cgroup_uncharge_folios() so we can
remove this API.
Link: https://lkml.kernel.org/r/20240227174254.710559-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Almost identical to mem_cgroup_uncharge_list(), except it takes a
folio_batch instead of a list_head.
Link: https://lkml.kernel.org/r/20240227174254.710559-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It sets memcg information for the pages after the split. A new parameter
new_order is added to tell the order of subpages in the new page, always 0
for now. It prepares for upcoming changes to support split huge page to
any lower order.
Link: https://lkml.kernel.org/r/20240226205534.1603748-6-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
