Commit Graph

18 Commits

Author SHA1 Message Date
Russell King
4f39467e52 Update rmk's email address in various drivers
Globally update my email address in six files scattered through the
tree.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-21 17:50:09 +01:00
Hans Verkuil
8082d0a33c media: cec-notifier: make cec_notifier_get_conn() static
This function is no longer used by other drivers, so it can be
made static.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-20 09:02:45 +01:00
Hans Verkuil
80f13a0823 media: cec-notifier: rename conn_name to port_name
This argument refers to a stable name for an HDMI port, mostly i915
(ACPI) specific. Since we'll be introducing a more generic 'name' argument
as well later, rename this now to avoid confusion.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-20 09:02:15 +01:00
Hans Verkuil
e611164793 media: cec: remove unused functions
Remove several functions that are no longer used now that the
conversion of cec drivers to cec_notifier_conn_(un)register() and
cec_notifier_cec_adap_(un)register() is complete.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-08 14:38:06 +01:00
Hans Verkuil
10d8f308ba cec: add cec_adapter to cec_notifier_cec_adap_unregister()
It is possible for one HDMI connector to have multiple CEC adapters. The
typical real-world scenario is that where one adapter is used when the
device is in standby, and one that's better/smarter when the device is
powered up.

The cec-notifier changes were made with that in mind, but I missed that in
order to support this you need to tell cec_notifier_cec_adap_unregister()
which adapter you are unregistering from the notifier.

Add this additional argument. It is currently unused, but once all drivers
use this, the CEC core will be adapted for these use-cases.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e9fc8740-6be6-43a7-beee-ce2d7b54936e@xs4all.nl
2019-10-07 12:47:43 +02:00
Hans Verkuil
b48cb35c6a media: cec-notifier: add new notifier functions
In order to support multiple CEC devices for an HDMI connector,
and to support cec_connector_info, drivers should use either a
cec_notifier_conn_(un)register pair of functions (HDMI drivers)
or a cec_notifier_cec_adap_(un)register pair (CEC adapter drivers).

This replaces cec_notifier_get_conn/cec_notifier_put.

For CEC adapters it is also no longer needed to call cec_notifier_register,
cec_register_cec_notifier and cec_notifier_unregister. This is now
all handled internally by the new functions.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-27 07:19:43 -04:00
Dariusz Marcinkiewicz
32a847f9fa media: cec: add struct cec_connector_info support
Define struct cec_connector_info in media/cec.h and define
CEC_CAP_CONNECTOR_INFO. In a later patch this will be moved to
uapi/linux/cec.h.

The CEC_CAP_CONNECTOR_INFO capability can be set by drivers, but
cec_allocate_adapter() will remove it again until the public API
for this can be enabled once all drm drivers wire this up correctly.

Also add the cec_fill_conn_info_from_drm and cec_s_conn_info functions,
which are needed by drm drivers to fill in the cec_connector info
based on a drm_connector.

The cec_notifier_(un)register and cec_register_cec_notifier
prototypes were moved from cec-notifier.h to cec.h since cec.h no longer
includes cec-notifier.h. These headers included each other before,
which caused various problems.

Due to these changes the seco-cec driver was changed as well: it
should include cec-notifier.h, not cec.h.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-27 07:18:43 -04:00
Hans Verkuil
fbbd403b32 media: cec-notifier: add cec_notifier_parse_hdmi_phandle helper
Add helper function to parse the DT for the hdmi-phandle property
and return the corresponding struct device pointer.

It takes care to avoid increasing the device refcount since all
we need is the device pointer. This pointer is used in the
notifier list as a key, but it is never accessed by the CEC driver.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22 13:09:59 -04:00
Neil Armstrong
7a78c1e116 media: cec-notifier: Get notifier by device and connector name
In non device-tree world, we can need to get the notifier by the driver
name directly and eventually defer probe if not yet created.

This patch adds a variant of the get function by using the device name
instead and will not create a notifier if not yet created.

But the i915 driver exposes at least 2 HDMI connectors, this patch also
adds the possibility to add a connector name tied to the notifier device
to form a tuple and associate different CEC controllers for each HDMI
connectors.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-13 08:44:16 +01:00
Hans Verkuil
ab15d248cc media: include/(uapi/)media: add SPDX license info
Replace the old license information with the corresponding SPDX
license for those headers that I authored.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 13:23:51 -05:00
Mauro Carvalho Chehab
1d54267b23 Linux 4.13-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZh8YYAAoJEHm+PkMAQRiG46QIAKOBbLlOY38zIJwDfJs6ydvH
 eFLryznS7RM2w0Gw1RyVAyWS43QS9RUNGDMa4UOb9AvurBHYpK29t1uq6LejQ/hn
 2Uvxuq95qEVVYzN1OA3WzLKUa35g3qRM9rTYFz7xGMRp2Ldk/aPRi/PVJLhSO3YQ
 HFRLsfNMWTkSR4imuxm7NS+cYMcqWbDbanvW5IwQ+RFRPo8Ac1PbFpGUdVtar6+O
 Fm3GLBsRB3dijJwYyWQKeDvtLr608i50by4yS7EIAqbUSfoDpJEyTL57oTCRok7P
 5ZycGpK4bXWF0OpBWpKgrFO5tB7xfzUDa3TmNhS3Q8ep4KLHNXwM3V6p8Y+YZco=
 =FId5
 -----END PGP SIGNATURE-----

Merge tag 'v4.13-rc4' into patchwork

Linux 4.13-rc4

* tag 'v4.13-rc4': (863 commits)
  Linux 4.13-rc4
  Fix compat_sys_sigpending breakage
  ext4: fix copy paste error in ext4_swap_extents()
  ext4: fix overflow caused by missing cast in ext4_resize_fs()
  ext4, project: expand inode extra size if possible
  ext4: cleanup ext4_expand_extra_isize_ea()
  ext4: restructure ext4_expand_extra_isize
  ext4: fix forgetten xattr lock protection in ext4_expand_extra_isize
  ext4: make xattr inode reads faster
  ext4: inplace xattr block update fails to deduplicate blocks
  ext4: remove unused mode parameter
  ext4: fix warning about stack corruption
  ext4: fix dir_nlink behaviour
  ext4: silence array overflow warning
  ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize
  platform/x86: intel-vbtn: match power button on press rather than release
  ext4: release discard bio after sending discard commands
  sparc64: Fix exception handling in UltraSPARC-III memcpy.
  arm64: avoid overflow in VA_START and PAGE_OFFSET
  arm64: Fix potential race with hardware DBM in ptep_set_access_flags()
  ...
2017-08-08 05:38:41 -04:00
Hans Verkuil
fc1ff45a07 media: cec-notifier: small improvements
Allow calling cec_notifier_set_phys_addr and
cec_notifier_set_phys_addr_from_edid with a NULL notifier, in which
case these functions do nothing.

Add a cec_notifier_phys_addr_invalidate helper function (the notifier
equivalent of cec_phys_addr_invalidate).

These changes simplify drm CEC driver support.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 05:46:44 -04:00
Hans Verkuil
5150418593 media: cec: move cec_register_cec_notifier to cec-notifier.h
The cec_register_cec_notifier function was in media/cec.h, but it
has to be in cec-notifier.h.

While we are at it, also document it and add a stub function for when
the notifier is disabled or the CEC core code is unreachable.

Based on an earlier patch from Jose Abreu <Jose.Abreu@synopsys.com>.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18 13:00:01 -03:00
Mauro Carvalho Chehab
42654ebad0 media fixes for v4.12-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZNnBiAAoJEAhfPr2O5OEV9bwP/1bus9tAw3AT+HxRSIaFFX8+
 DMDmJ6nZ4WQJ4fI04tKkUjpl+G2ImDGshdGgLht/YpaJRd6KgPqV+zWrAVX5/0e1
 mLyhjaALuk5M//JbkxEP95SWBOZ6SCIWlV/5oQRTNI86kO0gISxoCAsbumKlSSUC
 qTFmbmPp9siFpS43eZjVcgYIbwFx75qvLTc1+JRvxa2VhtMB5d4xYnXSpxlCvduj
 NN14KiphBgCOvyMQsi4q3H6ma8EL0sEtaukqPzXOnz6GGAIUUbDA23APM5H0LIIZ
 kYhO9ooez4dz1094ex1zSS/uQq2ogCTv7ShQseddNbHhOFG7Aq30AXLMEWeHaNp1
 fFb28CY3CBpNaYfjePbqIs8KKg3JxmJGmCGgW65p40UGUo1Itbpci5MqN8BjQAI8
 Ks1rf+V4iYQTr4QmQJQqCyJCljrsQbGMKZ9I67pmqfbqDunlH43Zr88DEWPv3rbW
 qac6U1vh108UHE/1KRZFjzvo31ToP+f+AwyVTXVeIi6vba2gvC8ASCJnZ/nGtO74
 Eb/GR0DtqvYGE6sXohbMywZ+8wRR6CdRVDC4YotQwaoghwnH10WPLg3JahECVMu7
 MbDtVvUHjbJ18cqwCW+J01gcuQxH/8Lx07T9T+pUFFanPBT7phPiQ/UAEPL1e3XO
 e4nFwX9h78wISBdy8Yx7
 =+jBV
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.12-2' into patchwork

media fixes for v4.12-rc4

* tag 'media/v4.12-2': (598 commits)
  [media] rc-core: race condition during ir_raw_event_register()
  [media] cec: drop MEDIA_CEC_DEBUG
  [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER
  [media] cec: select CEC_CORE instead of depend on it
  [media] rainshadow-cec: ensure exit_loop is intialized
  [media] atomisp: don't treat warnings as errors
  Linux 4.12-rc3
  x86/ftrace: Make sure that ftrace trampolines are not RWX
  x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range()
  selftests/ftrace: Add a testcase for many kprobe events
  kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
  ftrace: Fix memory leak in ftrace_graph_release()
  ipv4: add reference counting to metrics
  net: ethernet: ax88796: don't call free_irq without request_irq first
  ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets
  sctp: fix ICMP processing if skb is non-linear
  net: llc: add lock_sock in llc_ui_bind to avoid a race condition
  PCI/msi: fix the pci_alloc_irq_vectors_affinity stub
  blk-mq: Only register debugfs attributes for blk-mq queues
  x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
  ...

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-07 07:50:49 -03:00
Hans Verkuil
e94c32818d [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER
This config option is strictly speaking independent of the
media subsystem since it can be used by drm as well.

Besides, it looks odd when drivers select CEC_CORE and
MEDIA_CEC_NOTIFIER, that's inconsistent naming.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-04 15:23:35 -03:00
Arnd Bergmann
79eddc992e [media] cec-notifier.h: handle unreachable CONFIG_CEC_CORE
Fix a link error in this specific combination of config options:

CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CORE=m
CONFIG_MEDIA_CEC_NOTIFIER=y
CONFIG_VIDEO_STI_HDMI_CEC=m
CONFIG_DRM_STI=y

drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_remove':
sti_hdmi.c:(.text.sti_hdmi_remove+0x10): undefined reference to
`cec_notifier_set_phys_addr'
sti_hdmi.c:(.text.sti_hdmi_remove+0x34): undefined reference to
`cec_notifier_put'
drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_get_modes':
sti_hdmi.c:(.text.sti_hdmi_connector_get_modes+0x4a): undefined
reference to `cec_notifier_set_phys_addr_from_edid'
drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_probe':
sti_hdmi.c:(.text.sti_hdmi_probe+0x204): undefined reference to
`cec_notifier_get'
drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_detect':
sti_hdmi.c:(.text.sti_hdmi_connector_detect+0x36): undefined reference
to `cec_notifier_set_phys_addr'
drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_disable':
sti_hdmi.c:(.text.sti_hdmi_disable+0xc0): undefined reference to
`cec_notifier_set_phys_addr'

The version below seems to work, though I don't particularly
like the IS_REACHABLE() addition since that can be confusing
to users.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-18 07:33:31 -03:00
Hans Verkuil
ee7e987133 [media] cec.h: merge cec-edid.h into cec.h
Drop the separate cec-edid.h header and merge it into cec.h.

There was really no need to have a separate header for this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19 06:53:18 -03:00
Hans Verkuil
6917a7b774 [media] media: add CEC notifier support
Add support for CEC notifiers, which is used to convey CEC physical address
information from video drivers to their CEC counterpart driver(s).

Based on an earlier version from Russell King:

https://patchwork.kernel.org/patch/9277043/

The cec_notifier is a reference counted object containing the CEC physical address
state of a video device.

When a new notifier is registered the current state will be reported to
that notifier at registration time.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10 12:48:28 -03:00