This is needed for overlayfs, which is used by container managers.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Combine iter/update/trigger/str_hash flags into a single enum, and
x-macroize them for a to_text() function later.
These flags are all for a specific iter/key/update context, so it makes
sense to group them together - iter/update/trigger flags were already
given distinct bits, this cleans up and unifies that handling.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new helper, bch2_hash_lookup_in_snapshot(), for when we're not
operating in a subvolume and already have a snapshot ID, and then use it
in lookup_lostfound() -> __lookup_dirent().
This is a bugfix - lookup_lostfound() doesn't take a subvolume ID, we
were passing a nonsense subvolume ID before, and don't have one to pass
since we may be operating in an interior snapshot node that doesn't have
a subvolume ID.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Create a separate enum for str_hash flags - instead of abusing the
btree_insert_flags enum - and create a __bitwise typedef for sparse
typechecking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
As with previous conversions, replace -ENOENT uses with more informative
private error codes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Continuing the saga of introducing private dedicated error codes for
each error path, this patch converts ENOSPC to error codes that are
subtypes of ENOSPC. We've recently had a test failure where we got
-ENOSPC where we shouldn't have, and didn't have enough information to
tell where it came from, so this patch will solve that problem.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When subvolumes & snapshots were rolled out, hash_redo_key() was
disabled due to some new complications - namely, bch2_hash_set() works
at the subvolume level, and fsck does not run in a defined subvolume,
instead working at the snapshot ID level.
This patch splits out bch2_hash_set_snapshot() from bch2_hash_set(), and
makes one small tweak for fsck:
- Normally, bch2_hash_set() (and other dirent code) needs to know what
subvolume we're in, because dirents that point to other subvolumes
should only be visible in the subvolume they were created in, not
other snapshots. We can't check that in fsck, so we just assume that
all dirents are visible.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In BTREE_ITER_FILTER_SNAPHOTS mode, we skip over keys in unrelated
snapshots. When we hit the end of an inode, if the next inode(s) are in
a different subvolume, we could potentially have to skip past many keys
before finding a key we can return to the caller, so they can terminate
the iteration.
This adds a peek_upto() variant to solve this problem, to be used when
we know the range we're searching within.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch converts more enums in the on disk format to our standard
x-macro-with-strings deal - to enable better pretty-printing.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This changes the on disk format for dirents that point to subvols so
that they also record the subvolid of the parent subvol, so that we can
filter them out in other subvolumes.
This also updates the dirent code to do that filtering, and in
particular tweaks the rename code - we need to ensure that there's only
ever one dirent (counting multiplicities in different snapshots) that
point to a subvolume.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Code that uses for_each_btree_key often wants transaction restarts to be
handled locally and not returned. Originally, we wouldn't return
transaction restarts if there was a single iterator in the transaction -
the reasoning being if there weren't other iterators being invalidated,
and the current iterator was being advanced/retraversed, there weren't
any locks or iterators we were required to preserve.
But with the btree_path conversion that approach doesn't work anymore -
even when we're using for_each_btree_key() with a single iterator there
will still be two paths in the transaction, since we now always preserve
the path at the pos the iterator was initialized at - the reason being
that on restart we often restart from the same place.
And it turns out there's now a lot of for_each_btree_key() uses that _do
not_ want transaction restarts handled locally, and should be returning
them.
This patch splits out for_each_btree_key_norestart() and
for_each_btree_key_continue_norestart(), and converts existing users as
appropriate. for_each_btree_key(), for_each_btree_key_continue(), and
for_each_btree_node() now handle transaction restarts themselves by
calling bch2_trans_begin() when necessary - and the old hack to not
return transaction restarts when there's a single path in the
transaction has been deleted.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This is the final patch in the patch series implementing snapshots.
This patch implements two new ioctls that work like creation and
deletion of directories, but fancier.
- BCH_IOCTL_SUBVOLUME_CREATE, for creating new subvolumes and snaphots
- BCH_IOCTL_SUBVOLUME_DESTROY, for deleting subvolumes and snapshots
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
To implement snapshots, we need every filesystem btree operation (every
btree operation without a subvolume) to start by looking up the
subvolume and getting the current snapshot ID, with
bch2_subvolume_get_snapshot() - then, that snapshot ID is used for doing
btree lookups in BTREE_ITER_FILTER_SNAPSHOTS mode.
This patch adds those bch2_subvolume_get_snapshot() calls, and also
switches to passing around a subvol_inum instead of just an inode
number.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This splits btree_iter into two components: btree_iter is now the
externally visible componont, and it points to a btree_path which is now
reference counted.
This means we no longer have to clone iterators up front if they might
be mutated - btree_path can be shared by multiple iterators, and cloned
if an iterator would mutate a shared btree_path. This will help us use
iterators more efficiently, as well as slimming down the main long lived
state in btree_trans, and significantly cleans up the logic for iterator
lifetimes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
On transaction restart iterators won't be locked anymore - make sure
we're always checking for errors.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Upcoming refactoring is going to change bch2_trans_update() to start
returning transaction restarts.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- Ensure the second key value in bch_hash_info is initialized to zero
if the info type is of type BCH_STR_HASH_SIPHASH.
- Initialize the possibly returned value in bch2_inode_create. Assuming
bch2_btree_iter_peek returns bkey_s_c_null, the uninitialized value
of ret could be returned to the user as an error pointer.
- Fix compiler warning in initialization of bkey_s_c_stripe
fs/bcachefs/buckets.c:1646:35: warning: suggest braces around initialization
of subobject [-Wmissing-braces]
struct bkey_s_c_stripe new_s = { NULL };
^~~~
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch standardizes all the enums that have associated string tables
(probably more enums should have string tables).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Snapshots are going to need a different whiteout key type. Also, switch
to using BCH_BKEY_TYPES() to define the bkey value accessors.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we now always preallocate the maximum number of iterators when we
initialize a btree transaction, getting an iterator never fails - we can
delete a fair amount of error path code.
This patch also simplifies the iterator allocation code a bit.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
All iterators should be released now with bch2_trans_iter_put(), so
TRANS_RESET_ITERS shouldn't be needed anymore, and TRANS_RESET_MEM is
always used.
Also convert more code to __bch2_trans_do().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This wasn't originally required, but this is the model we're moving
towards.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This should fix a transaction iterator overflow bug during fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The trigger flags really belong with individual btree_insert_entries,
not the transaction commit flags - this splits out those flags and
unifies them with the BCH_BUCKET_MARK flags. Todo - split out
btree_trigger.c from buckets.c
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Helps for preventing things from getting out of sync.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With the refactoring that's coming to add fuse support, we want
bch2_hash_info_init() to be cheaper so we don't have to rely on anything
cached besides the inode in the btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree_trans struct needs to memoize/cache btree iterators, so that
on transaction restart we don't have to completely redo btree lookups,
and so that we can do them all at once in the correct order when the
transaction had to restart to avoid a deadlock.
This switches the btree iterator lookups to work based on iterator
position, instead of trying to match them up based on the stack trace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
the btree trans iterator stuff relies on a dirty horrible hack that uses
a short backtrace to generate tokens, and gcc uninlining these functions
breaks that hack. ugh.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
this lets us get rid of a lot of extra switch statements - in a lot of
places we dispatch on the btree node type, and then the key type, so
this is a nice cleanup across a lot of code.
Also improve the on disk format versioning stuff.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.
Website: https://bcachefs.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
