Overhaul the third party-induced invalidation handling, making use of the
previously added volume-level event counters (cb_scrub and cb_ro_snapshot)
that are now being parsed out of the VolSync record returned by the
fileserver in many of its replies.
This allows better handling of RO (and Backup) volumes. Since these are
snapshot of a RW volume that are updated atomically simultantanously across
all servers that host them, they only require a single callback promise for
the entire volume. The currently upstream code assumes that RO volumes
operate in the same manner as RW volumes, and that each file has its own
individual callback - which means that it does a status fetch for *every*
file in a RO volume, whether or not the volume got "released" (volume
callback breaks can occur for other reasons too, such as the volumeserver
taking ownership of a volume from a fileserver).
To this end, make the following changes:
(1) Change the meaning of the volume's cb_v_break counter so that it is
now a hint that we need to issue a status fetch to work out the state
of a volume. cb_v_break is incremented by volume break callbacks and
by server initialisation callbacks.
(2) Add a second counter, cb_v_check, to the afs_volume struct such that
if this differs from cb_v_break, we need to do a check. When the
check is complete, cb_v_check is advanced to what cb_v_break was at
the start of the status fetch.
(3) Move the list of mmap'd vnodes to the volume and trigger removal of
PTEs that map to files on a volume break rather than on a server
break.
(4) When a server reinitialisation callback comes in, use the
server-to-volume reverse mapping added in a preceding patch to iterate
over all the volumes using that server and clear the volume callback
promises for that server and the general volume promise as a whole to
trigger reanalysis.
(5) Replace the AFS_VNODE_CB_PROMISED flag with an AFS_NO_CB_PROMISE
(TIME64_MIN) value in the cb_expires_at field, reducing the number of
checks we need to make.
(6) Change afs_check_validity() to quickly see if various event counters
have been incremented or if the vnode or volume callback promise is
due to expire/has expired without making any changes to the state.
That is now left to afs_validate() as this may get more complicated in
future as we may have to examine server records too.
(7) Overhaul afs_validate() so that it does a single status fetch if we
need to check the state of either the vnode or the volume - and do so
under appropriate locking. The function does the following steps:
(A) If the vnode/volume is no longer seen as valid, then we take the
vnode validation lock and, if the volume promise has expired, the
volume check lock also. The latter prevents redundant checks being
made to find out if a new version of the volume got released.
(B) If a previous RPC call found that the volsync changed unexpectedly
or that a RO volume was updated, then we unmap all PTEs pointing to
the file to stop mmap being used for access.
(C) If the vnode is still seen to be of uncertain validity, then we
perform an FS.FetchStatus RPC op to jointly update the volume status
and the vnode status. This assessment is done as part of parsing the
reply:
If the RO volume creation timestamp advances, cb_ro_snapshot is
incremented; if either the creation or update timestamps changes in
an unexpected way, the cb_scrub counter is incremented
If the Data Version returned doesn't match the copy we have
locally, then we ask for the pagecache to be zapped. This takes
care of handling RO update.
(D) If cb_scrub differs between volume and vnode, the vnode's
pagecache is zapped and the vnode's cb_scrub is updated unless the
file is marked as having been deleted.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Apply server breaks to mmap'd files that are being used from that server
from the call processor work function rather than punting it off to a
workqueue. The work item, afs_server_init_callback(), then bumps each
individual inode off to its own work item introducing a potentially lengthy
delay. This reduces that delay at the cost of extending the amount of time
we delay replying to the CB.InitCallBack3 notification RPC from the server.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Defer volume record destruction to a workqueue so that afs_put_volume()
isn't going to run the destruction process in the callback workqueue whilst
the server is holding up other clients whilst waiting for us to reply to a
CB.CallBack notification RPC.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Make it possible to find the afs_volume structs that are using an
afs_server struct to aid in breaking volume callbacks.
The way this is done is that each afs_volume already has an array of
afs_server_entry records that point to the servers where that volume might
be found. An afs_volume backpointer and a list node is added to each entry
and each entry is then added to an RCU-traversable list on the afs_server
to which it points.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
In afs_update_cell(), ret is the result of the DNS lookup and the errors
are to be handled by a switch - however, the value gets clobbered in
between by setting it to -ENOMEM in case afs_alloc_vlserver_list()
fails.
Fix this by moving the setting of -ENOMEM into the error handling for
OOM failure. Further, only do it if we don't have an alternative error
to return.
Found by Linux Verification Center (linuxtesting.org) with SVACE. Based
on a patch from Anastasia Belova [1].
Fixes: d5c32c89b2 ("afs: Fix cell DNS lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Anastasia Belova <abelova@astralinux.ru>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: lvc-project@linuxtesting.org
Link: https://lore.kernel.org/r/20231221085849.1463-1-abelova@astralinux.ru/ [1]
Link: https://lore.kernel.org/r/1700862.1703168632@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the afs filesystem to support the new afs driver.
The following changes have been made:
(1) The fscache_netfs struct is no more, and there's no need to register
the filesystem as a whole. There's also no longer a cell cookie.
(2) The volume cookie is now an fscache_volume cookie, allocated with
fscache_acquire_volume(). This function takes three parameters: a
string representing the "volume" in the index, a string naming the
cache to use (or NULL) and a u64 that conveys coherency metadata for
the volume.
For afs, I've made it render the volume name string as:
"afs,<cell>,<volume_id>"
and the coherency data is currently 0.
(3) The fscache_cookie_def is no more and needed information is passed
directly to fscache_acquire_cookie(). The cache no longer calls back
into the filesystem, but rather metadata changes are indicated at
other times.
fscache_acquire_cookie() is passed the same keying and coherency
information as before, except that these are now stored in big endian
form instead of cpu endian. This makes the cache more copyable.
(4) fscache_use_cookie() and fscache_unuse_cookie() are called when a file
is opened or closed to prevent a cache file from being culled and to
keep resources to hand that are needed to do I/O.
fscache_use_cookie() is given an indication if the cache is likely to
be modified locally (e.g. the file is open for writing).
fscache_unuse_cookie() is given a coherency update if we had the file
open for writing and will update that.
(5) fscache_invalidate() is now given uptodate auxiliary data and a file
size. It can also take a flag to indicate if this was due to a DIO
write. This is wrapped into afs_fscache_invalidate() now for
convenience.
(6) fscache_resize() now gets called from the finalisation of
afs_setattr(), and afs_setattr() does use/unuse of the cookie around
the call to support this.
(7) fscache_note_page_release() is called from afs_release_page().
(8) Use a killable wait in nfs_vm_page_mkwrite() when waiting for
PG_fscache to be cleared.
Render the parts of the cookie key for an afs inode cookie as big endian.
Changes
=======
ver #2:
- Use gfpflags_allow_blocking() rather than using flag directly.
- fscache_acquire_volume() now returns errors.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Tested-by: kafs-testing@auristor.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819661382.215744.1485608824741611837.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906970002.143852.17678518584089878259.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967174665.1823006.1301789965454084220.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021568841.640689.6684240152253400380.stgit@warthog.procyon.org.uk/ # v4
Fix the coherency management of mmap'd data such that 3rd-party changes
become visible as soon as possible after the callback notification is
delivered by the fileserver. This is done by the following means:
(1) When we break a callback on a vnode specified by the CB.CallBack call
from the server, we queue a work item (vnode->cb_work) to go and
clobber all the PTEs mapping to that inode.
This causes the CPU to trip through the ->map_pages() and
->page_mkwrite() handlers if userspace attempts to access the page(s)
again.
(Ideally, this would be done in the service handler for CB.CallBack,
but the server is waiting for our reply before considering, and we
have a list of vnodes, all of which need breaking - and the process of
getting the mmap_lock and stripping the PTEs on all CPUs could be
quite slow.)
(2) Call afs_validate() from the ->map_pages() handler to check to see if
the file has changed and to get a new callback promise from the
server.
Also handle the fileserver telling us that it's dropping all callbacks,
possibly after it's been restarted by sending us a CB.InitCallBackState*
call by the following means:
(3) Maintain a per-cell list of afs files that are currently mmap'd
(cell->fs_open_mmaps).
(4) Add a work item to each server that is invoked if there are any open
mmaps when CB.InitCallBackState happens. This work item goes through
the aforementioned list and invokes the vnode->cb_work work item for
each one that is currently using this server.
This causes the PTEs to be cleared, causing ->map_pages() or
->page_mkwrite() to be called again, thereby calling afs_validate()
again.
I've chosen to simply strip the PTEs at the point of notification reception
rather than invalidate all the pages as well because (a) it's faster, (b)
we may get a notification for other reasons than the data being altered (in
which case we don't want to clobber the pagecache) and (c) we need to ask
the server to find out - and I don't want to wait for the reply before
holding up userspace.
This was tested using the attached test program:
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{
size_t size = getpagesize();
unsigned char *p;
bool mod = (argc == 3);
int fd;
if (argc != 2 && argc != 3) {
fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]);
exit(2);
}
fd = open(argv[1], mod ? O_RDWR : O_RDONLY);
if (fd < 0) {
perror(argv[1]);
exit(1);
}
p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ,
MAP_SHARED, fd, 0);
if (p == MAP_FAILED) {
perror("mmap");
exit(1);
}
for (;;) {
if (mod) {
p[0]++;
msync(p, size, MS_ASYNC);
fsync(fd);
}
printf("%02x", p[0]);
fflush(stdout);
sleep(1);
}
}
It runs in two modes: in one mode, it mmaps a file, then sits in a loop
reading the first byte, printing it and sleeping for a second; in the
second mode it mmaps a file, then sits in a loop incrementing the first
byte and flushing, then printing and sleeping.
Two instances of this program can be run on different machines, one doing
the reading and one doing the writing. The reader should see the changes
made by the writer, but without this patch, they aren't because validity
checking is being done lazily - only on entry to the filesystem.
Testing the InitCallBackState change is more complicated. The server has
to be taken offline, the saved callback state file removed and then the
server restarted whilst the reading-mode program continues to run. The
client machine then has to poke the server to trigger the InitCallBackState
call.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/
The patch dca54a7bbb: "afs: Add tracing for cell refcount and active user
count" from Oct 13, 2020, leads to the following Smatch complaint:
fs/afs/cell.c:596 afs_unuse_cell()
warn: variable dereferenced before check 'cell' (see line 592)
Fix this by moving the retrieval of the cell debug ID to after the check of
the validity of the cell pointer.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: dca54a7bbb ("afs: Add tracing for cell refcount and active user count")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Dan Carpenter <dan.carpenter@oracle.com>
Add a tracepoint to log the cell refcount and active user count and pass in
a reason code through various functions that manipulate these counters.
Additionally, a helper function, afs_see_cell(), is provided to log
interesting places that deal with a cell without actually doing any
accounting directly.
Signed-off-by: David Howells <dhowells@redhat.com>
When the afs module is removed, one of the things that has to be done is to
purge the cell database. afs_cell_purge() cancels the management timer and
then starts the cell manager work item to do the purging. This does a
single run through and then assumes that all cells are now purged - but
this is no longer the case.
With the introduction of alias detection, a later cell in the database can
now be holding an active count on an earlier cell (cell->alias_of). The
purge scan passes by the earlier cell first, but this can't be got rid of
until it has discarded the alias. Ordinarily, afs_unuse_cell() would
handle this by setting the management timer to trigger another pass - but
afs_set_cell_timer() doesn't do anything if the namespace is being removed
(net->live == false). rmmod then hangs in the wait on cells_outstanding in
afs_cell_purge().
Fix this by making afs_set_cell_timer() directly queue the cell manager if
net->live is false. This causes additional management passes.
Queueing the cell manager increments cells_outstanding to make sure the
wait won't complete until all cells are destroyed.
Fixes: 8a070a9648 ("afs: Detect cell aliases 1 - Cells with root volumes")
Signed-off-by: David Howells <dhowells@redhat.com>
Management of the lifetime of afs_cell struct has some problems due to the
usage counter being used to determine whether objects of that type are in
use in addition to whether anyone might be interested in the structure.
This is made trickier by cell objects being cached for a period of time in
case they're quickly reused as they hold the result of a setup process that
may be slow (DNS lookups, AFS RPC ops).
Problems include the cached root volume from alias resolution pinning its
parent cell record, rmmod occasionally hanging and occasionally producing
assertion failures.
Fix this by splitting the count of active users from the struct reference
count. Things then work as follows:
(1) The cell cache keeps +1 on the cell's activity count and this has to
be dropped before the cell can be removed. afs_manage_cell() tries to
exchange the 1 to a 0 with the cells_lock write-locked, and if
successful, the record is removed from the net->cells.
(2) One struct ref is 'owned' by the activity count. That is put when the
active count is reduced to 0 (final_destruction label).
(3) A ref can be held on a cell whilst it is queued for management on a
work queue without confusing the active count. afs_queue_cell() is
added to wrap this.
(4) The queue's ref is dropped at the end of the management. This is
split out into a separate function, afs_manage_cell_work().
(5) The root volume record is put after a cell is removed (at the
final_destruction label) rather then in the RCU destruction routine.
(6) Volumes hold struct refs, but aren't active users.
(7) Both counts are displayed in /proc/net/afs/cells.
There are some management function changes:
(*) afs_put_cell() now just decrements the refcount and triggers the RCU
destruction if it becomes 0. It no longer sets a timer to have the
manager do this.
(*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease
the active count. afs_unuse_cell() sets the management timer.
(*) afs_queue_cell() is added to queue a cell with approprate refs.
There are also some other fixes:
(*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL.
(*) Make sure that candidate cells in lookups are properly destroyed
rather than being simply kfree'd. This ensures the bits it points to
are destroyed also.
(*) afs_dec_cells_outstanding() is now called in cell destruction rather
than at "final_destruction". This ensures that cell->net is still
valid to the end of the destructor.
(*) As a consequence of the previous two changes, move the increment of
net->cells_outstanding that was at the point of insertion into the
tree to the allocation routine to correctly balance things.
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
There are a number of problems that are being seen by the rapidly mounting
and unmounting an afs dynamic root with an explicit cell and volume
specified (which should probably be rejected, but that's a separate issue):
What the tests are doing is to look up/create a cell record for the name
given and then tear it down again without actually using it to try to talk
to a server. This is repeated endlessly, very fast, and the new cell
collides with the old one if it's not quick enough to reuse it.
It appears (as suggested by Hillf Danton) that the search through the RB
tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and
that it's not blocking the write_seqlock(), despite taking two passes at
it. He suggested that the code should take a ref on the cell it's
attempting to look at - but this shouldn't be necessary until we've
compared the cell names. It's possible that I'm missing a barrier
somewhere.
However, using an RCU search for this is overkill, really - we only need to
access the cell name in a few places, and they're places where we're may
end up sleeping anyway.
Fix this by switching to an R/W semaphore instead.
Additionally, draw the down_read() call inside the function (renamed to
afs_find_cell()) since all the callers were taking the RCU read lock (or
should've been[*]).
[*] afs_probe_cell_name() should have been, but that doesn't appear to be
involved in the bug reports.
The symptoms of this look like:
general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN
KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf]
...
RIP: 0010:strncasecmp lib/string.c:52 [inline]
RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43
afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88
afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249
afs_parse_source fs/afs/super.c:290 [inline]
...
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
cc: syzkaller-bugs@googlegroups.com
The cell name stored in the afs_cell struct is a 64-char + NUL buffer -
when it needs to be able to handle up to AFS_MAXCELLNAME (256 chars) + NUL.
Fix this by changing the array to a pointer and allocating the string.
Found using Coverity.
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reorganise afs_volume objects such that they're in a tree keyed on volume
ID, rooted at on an afs_cell object rather than being in multiple trees,
each of which is rooted on an afs_server object.
afs_server structs become per-cell and acquire a pointer to the cell.
The process of breaking a callback then starts with finding the server by
its network address, following that to the cell and then looking up each
volume ID in the volume tree.
This is simpler than the afs_vol_interest/afs_cb_interest N:M mapping web
and allows those structs and the code for maintaining them to be simplified
or removed.
It does make a couple of things a bit more tricky, though:
(1) Operations now start with a volume, not a server, so there can be more
than one answer as to whether or not the server we'll end up using
supports the FS.InlineBulkStatus RPC.
(2) CB RPC operations that specify the server UUID. There's still a tree
of servers by UUID on the afs_net struct, but the UUIDs in it aren't
guaranteed unique.
Signed-off-by: David Howells <dhowells@redhat.com>
Put in the first phase of cell alias detection. This part handles alias
detection for cells that have root.cell volumes (which is expected to be
likely).
When a cell becomes newly active, it is probed for its root.cell volume,
and if it has one, this volume is compared against other root.cell volumes
to find out if the list of fileserver UUIDs have any in common - and if
that's the case, do the address lists of those fileservers have any
addresses in common. If they do, the new cell is adjudged to be an alias
of the old cell and the old cell is used instead.
Comparing is aided by the server list in struct afs_server_list being
sorted in UUID order and the addresses in the fileserver address lists
being sorted in address order.
The cell then retains the afs_volume object for the root.cell volume, even
if it's not mounted for future alias checking.
This necessary because:
(1) Whilst fileservers have UUIDs that are meant to be globally unique, in
practice they are not because cells get cloned without changing the
UUIDs - so afs_server records need to be per cell.
(2) Sometimes the DNS is used to make cell aliases - but if we don't know
they're the same, we may end up with multiple superblocks and multiple
afs_server records for the same thing, impairing our ability to
deliver callback notifications of third party changes
(3) The fileserver RPC API doesn't contain the cell name, so it can't tell
us which cell it's notifying and can't see that a change made to to
one cell should notify the same client that's also accessed as the
other cell.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The afs filesystem needs to prohibit certain characters from cell names,
such as '/', as these are used to form filenames in procfs, leading to
the following warning being generated:
WARNING: CPU: 0 PID: 3489 at fs/proc/generic.c:178
Fix afs_alloc_cell() to disallow nonprintable characters, '/', '@' and
names that begin with a dot.
Remove the check for "@cell" as that is then redundant.
This can be tested by running:
echo add foo/.bar 1.2.3.4 >/proc/fs/afs/cells
Note that we will also need to deal with:
- Names ending in ".invalid" shouldn't be passed to the DNS.
- Names that contain non-valid domainname chars shouldn't be passed to
the DNS.
- DNS replies that say "your-dns-needs-immediate-attention.<gTLD>" and
replies containing A records that say 127.0.53.53 should be
considered invalid.
[https://www.icann.org/en/system/files/files/name-collision-mitigation-01aug14-en.pdf]
but these need to be dealt with by the kafs-client DNS program rather
than the kernel.
Reported-by: syzbot+b904ba7c947a37b4b291@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a leak on the cell refcount in afs_lookup_cell_rcu() due to
non-clearance of the default error in the case a NULL cell name is passed
and the workstation default cell is used.
Also put a bit at the end to make sure we don't leak a cell ref if we're
going to be returning an error.
This leak results in an assertion like the following when the kafs module is
unloaded:
AFS: Assertion failed
2 == 1 is false
0x2 == 0x1 is false
------------[ cut here ]------------
kernel BUG at fs/afs/cell.c:770!
...
RIP: 0010:afs_manage_cells+0x220/0x42f [kafs]
...
process_one_work+0x4c2/0x82c
? pool_mayday_timeout+0x1e1/0x1e1
? do_raw_spin_lock+0x134/0x175
worker_thread+0x336/0x4a6
? rescuer_thread+0x4af/0x4af
kthread+0x1de/0x1ee
? kthread_park+0xd4/0xd4
ret_from_fork+0x24/0x30
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, once configured, AFS cells are looked up in the DNS at regular
intervals - which is a waste of resources if those cells aren't being
used. It also leads to a problem where cells preloaded, but not
configured, before the network is brought up end up effectively statically
configured with no VL servers and are unable to get any.
Fix this by not doing the DNS lookup until the first time a cell is
touched. It is waited for if we don't have any cached records yet,
otherwise the DNS lookup to maintain the record is done in the background.
This has the downside that the first time you touch a cell, you now have to
wait for the upcall to do the required DNS lookups rather than them already
being cached.
Further, the record is not replaced if the old record has at least one
server in it and the new record doesn't have any.
Fixes: 0a5143f2f8 ("afs: Implement VL server rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix it such that afs_cell records always have a VL server list record
attached, even if it's a dummy one, so that various checks can be removed.
Signed-off-by: David Howells <dhowells@redhat.com>
When afs_update_cell() replaces the cell->vl_servers list, it uses RCU
protocol so that proc is protected, but doesn't take ->vl_servers_lock to
protect afs_start_vl_iteration() (which does actually take a shared lock).
Fix this by making afs_update_cell() take an exclusive lock when replacing
->vl_servers.
Fixes: 0a5143f2f8 ("afs: Implement VL server rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
When a cell with a volume location server list is added manually by
echoing the details into /proc/net/afs/cells, a record is added but the
flag saying it has been looked up isn't set.
This causes the VL server rotation code to wait forever, with the top of
/proc/pid/stack looking like:
afs_select_vlserver+0x3a6/0x6f3
afs_vl_lookup_vldb+0x4b/0x92
afs_create_volume+0x25/0x1b9
...
with the thread stuck in afs_start_vl_iteration() waiting for
AFS_CELL_FL_NO_LOOKUP_YET to be cleared.
Fix this by clearing AFS_CELL_FL_NO_LOOKUP_YET when setting up a record
if that record's details were supplied manually.
Fixes: 0a5143f2f8 ("afs: Implement VL server rotation")
Reported-by: Dave Botsch <dwb7@cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the TTL on VL server and address lists isn't set in all
circumstances and may be set to poor choices in others, since the TTL is
derived from the SRV/AFSDB DNS record if and when available.
Fix the TTL by limiting the range to a minimum and maximum from the current
time. At some point these can be made into sysctl knobs. Further, use the
TTL we obtained from the upcall to set the expiry on negative results too;
in future a mechanism can be added to force reloading of such data.
Signed-off-by: David Howells <dhowells@redhat.com>
Track VL servers as independent entities rather than lumping all their
addresses together into one set and implement server-level rotation by:
(1) Add the concept of a VL server list, where each server has its own
separate address list. This code is similar to the FS server list.
(2) Use the DNS resolver to retrieve a set of servers and their associated
addresses, ports, preference and weight ratings.
(3) In the case of a legacy DNS resolver or an address list given directly
through /proc/net/afs/cells, create a list containing just a dummy
server record and attach all the addresses to that.
(4) Implement a simple rotation policy, for the moment ignoring the
priorities and weights assigned to the servers.
(5) Show the address list through /proc/net/afs/<cell>/vlservers. This
also displays the source and status of the data as indicated by the
upcall.
Signed-off-by: David Howells <dhowells@redhat.com>
Access to the list of cells by /proc/net/afs/cells has a couple of
problems:
(1) It should be checking against SEQ_START_TOKEN for the keying the
header line.
(2) It's only holding the RCU read lock, so it can't just walk over the
list without following the proper RCU methods.
Fix these by using an hlist instead of an ordinary list and using the
appropriate accessor functions to follow it with RCU.
Since the code that adds a cell to the list must also necessarily change,
sort the list on insertion whilst we're at it.
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alter the dynroot mount so that cells created by manipulation of
/proc/fs/afs/cells and /proc/fs/afs/rootcell and by specification of a root
cell as a module parameter will cause directories for those cells to be
created in the dynamic root superblock for the network namespace[*].
To this end:
(1) Only one dynamic root superblock is now created per network namespace
and this is shared between all attempts to mount it. This makes it
easier to find the superblock to modify.
(2) When a dynamic root superblock is created, the list of cells is walked
and directories created for each cell already defined.
(3) When a new cell is added, if a dynamic root superblock exists, a
directory is created for it.
(4) When a cell is destroyed, the directory is removed.
(5) These directories are created by calling lookup_one_len() on the root
dir which automatically creates them if they don't exist.
[*] Inasmuch as network namespaces are currently supported here.
Signed-off-by: David Howells <dhowells@redhat.com>
Implement network namespacing within AFS, but don't yet let mounts occur
outside the init namespace. An additional patch will be required propagate
the network namespace across automounts.
Signed-off-by: David Howells <dhowells@redhat.com>
The afs_net::ws_cell member is sometimes used under RCU conditions from
within an seq-readlock. It isn't, however, marked __rcu and it isn't set
using the proper RCU barrier-imposing functions.
Fix this by annotating it with __rcu and using appropriate barriers to
make sure accesses are correctly ordered.
Without this, the code can produce the following warning:
>> fs/afs/proc.c:151:24: sparse: incompatible types in comparison expression (different address spaces)
Fixes: f044c8847b ("afs: Lay the groundwork for supporting network namespaces")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Implement @cell substitution handling such that if @cell is seen as a name
in a dynamic root mount, then the name of the root cell for that network
namespace will be substituted for @cell during lookup.
The substitution of @cell for the current net namespace is set by writing
the cell name to /proc/fs/afs/rootcell. The value can be obtained by
reading the file.
For example:
# mount -t afs none /kafs -o dyn
# echo grand.central.org >/proc/fs/afs/rootcell
# ls /kafs/@cell
archive/ cvs/ doc/ local/ project/ service/ software/ user/ www/
# cat /proc/fs/afs/rootcell
grand.central.org
Signed-off-by: David Howells <dhowells@redhat.com>
AFS cells that are added or set as the workstation cell through /proc are
pinned against removal by setting the AFS_CELL_FL_NO_GC flag on them and
taking a ref. The ref should be only taken if the flag wasn't already set.
Fix this by making it conditional.
Without this an assertion failure will occur during module removal
indicating that the refcount is too elevated.
Signed-off-by: David Howells <dhowells@redhat.com>
Fix warnings raised by checker, including:
(*) Warnings raised by unequal comparison for the purposes of sorting,
where the endianness doesn't matter:
fs/afs/addr_list.c:246:21: warning: restricted __be16 degrades to integer
fs/afs/addr_list.c:246:30: warning: restricted __be16 degrades to integer
fs/afs/addr_list.c:248:21: warning: restricted __be32 degrades to integer
fs/afs/addr_list.c:248:49: warning: restricted __be32 degrades to integer
fs/afs/addr_list.c:283:21: warning: restricted __be16 degrades to integer
fs/afs/addr_list.c:283:30: warning: restricted __be16 degrades to integer
(*) afs_set_cb_interest() is not actually used and can be removed.
(*) afs_cell_gc_delay() should be provided with a sysctl.
(*) afs_cell_destroy() needs to use rcu_access_pointer() to read
cell->vl_addrs.
(*) afs_init_fs_cursor() should be static.
(*) struct afs_vnode::permit_cache needs to be marked __rcu.
(*) afs_server_rcu() needs to use rcu_access_pointer().
(*) afs_destroy_server() should use rcu_access_pointer() on
server->addresses as the server object is no longer accessible.
(*) afs_find_server() casts __be16/__be32 values to int in order to
directly compare them for the purpose of finding a match in a list,
but is should also annotate the cast with __force to avoid checker
warnings.
(*) afs_check_permit() accesses vnode->permit_cache outside of the RCU
readlock, though it doesn't then access the value; the extraneous
access is deleted.
False positives:
(*) Conditional locking around the code in xdr_decode_AFSFetchStatus. This
can be dealt with in a separate patch.
fs/afs/fsclient.c:148:9: warning: context imbalance in 'xdr_decode_AFSFetchStatus' - different lock contexts for basic block
(*) Incorrect handling of seq-retry lock context balance:
fs/afs/inode.c:455:38: warning: context imbalance in 'afs_getattr' - different
lock contexts for basic block
fs/afs/server.c:52:17: warning: context imbalance in 'afs_find_server' - different lock contexts for basic block
fs/afs/server.c:128:17: warning: context imbalance in 'afs_find_server_by_uuid' - different lock contexts for basic block
Errors:
(*) afs_lookup_cell_rcu() needs to break out of the seq-retry loop, not go
round again if it successfully found the workstation cell.
(*) Fix UUID decode in afs_deliver_cb_probe_uuid().
(*) afs_cache_permit() has a missing rcu_read_unlock() before one of the
jumps to the someone_else_changed_it label. Move the unlock to after
the label.
(*) afs_vl_get_addrs_u() is using ntohl() rather than htonl() when
encoding to XDR.
(*) afs_deliver_yfsvl_get_endpoints() is using htonl() rather than ntohl()
when decoding from XDR.
Signed-off-by: David Howells <dhowells@redhat.com>
Pass the object size in to fscache_acquire_cookie() and
fscache_write_page() rather than the netfs providing a callback by which it
can be received. This makes it easier to update the size of the object
when a new page is written that extends the object.
The current object size is also passed by fscache to the check_aux
function, obviating the need to store it in the aux data.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Anna Schumaker <anna.schumaker@netapp.com>
Tested-by: Steve Dickson <steved@redhat.com>
Attach copies of the index key and auxiliary data to the fscache cookie so
that:
(1) The callbacks to the netfs for this stuff can be eliminated. This
can simplify things in the cache as the information is still
available, even after the cache has relinquished the cookie.
(2) Simplifies the locking requirements of accessing the information as we
don't have to worry about the netfs object going away on us.
(3) The cache can do lazy updating of the coherency information on disk.
As long as the cache is flushed before reboot/poweroff, there's no
need to update the coherency info on disk every time it changes.
(4) Cookies can be hashed or put in a tree as the index key is easily
available. This allows:
(a) Checks for duplicate cookies can be made at the top fscache layer
rather than down in the bowels of the cache backend.
(b) Caching can be added to a netfs object that has a cookie if the
cache is brought online after the netfs object is allocated.
A certain amount of space is made in the cookie for inline copies of the
data, but if it won't fit there, extra memory will be allocated for it.
The downside of this is that live cache operation requires more memory.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Anna Schumaker <anna.schumaker@netapp.com>
Tested-by: Steve Dickson <steved@redhat.com>
The old wait_on_atomic_t() is going to get removed, use the more
flexible wait_var_event() API instead.
No change in functionality.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Due to recent changes this piece of code is no longer needed.
Addresses-Coverity-ID: 1462033
Link: https://lkml.kernel.org/r/4923.1510957307@warthog.procyon.org.uk
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The current code assumes that volumes and servers are per-cell and are
never shared, but this is not enforced, and, indeed, public cells do exist
that are aliases of each other. Further, an organisation can, say, set up
a public cell and a private cell with overlapping, but not identical, sets
of servers. The difference is purely in the database attached to the VL
servers.
The current code will malfunction if it sees a server in two cells as it
assumes global address -> server record mappings and that each server is in
just one cell.
Further, each server may have multiple addresses - and may have addresses
of different families (IPv4 and IPv6, say).
To this end, the following structural changes are made:
(1) Server record management is overhauled:
(a) Server records are made independent of cell. The namespace keeps
track of them, volume records have lists of them and each vnode
has a server on which its callback interest currently resides.
(b) The cell record no longer keeps a list of servers known to be in
that cell.
(c) The server records are now kept in a flat list because there's no
single address to sort on.
(d) Server records are now keyed by their UUID within the namespace.
(e) The addresses for a server are obtained with the VL.GetAddrsU
rather than with VL.GetEntryByName, using the server's UUID as a
parameter.
(f) Cached server records are garbage collected after a period of
non-use and are counted out of existence before purging is allowed
to complete. This protects the work functions against rmmod.
(g) The servers list is now in /proc/fs/afs/servers.
(2) Volume record management is overhauled:
(a) An RCU-replaceable server list is introduced. This tracks both
servers and their coresponding callback interests.
(b) The superblock is now keyed on cell record and numeric volume ID.
(c) The volume record is now tied to the superblock which mounts it,
and is activated when mounted and deactivated when unmounted.
This makes it easier to handle the cache cookie without causing a
double-use in fscache.
(d) The volume record is loaded from the VLDB using VL.GetEntryByNameU
to get the server UUID list.
(e) The volume name is updated if it is seen to have changed when the
volume is updated (the update is keyed on the volume ID).
(3) The vlocation record is got rid of and VLDB records are no longer
cached. Sufficient information is stored in the volume record, though
an update to a volume record is now no longer shared between related
volumes (volumes come in bundles of three: R/W, R/O and backup).
and the following procedural changes are made:
(1) The fileserver cursor introduced previously is now fleshed out and
used to iterate over fileservers and their addresses.
(2) Volume status is checked during iteration, and the server list is
replaced if a change is detected.
(3) Server status is checked during iteration, and the address list is
replaced if a change is detected.
(4) The abort code is saved into the address list cursor and -ECONNABORTED
returned in afs_make_call() if a remote abort happened rather than
translating the abort into an error message. This allows actions to
be taken depending on the abort code more easily.
(a) If a VMOVED abort is seen then this is handled by rechecking the
volume and restarting the iteration.
(b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is
handled by sleeping for a short period and retrying and/or trying
other servers that might serve that volume. A message is also
displayed once until the condition has cleared.
(c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the
moment.
(d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to
see if it has been deleted; if not, the fileserver is probably
indicating that the volume couldn't be attached and needs
salvaging.
(e) If statfs() sees one of these aborts, it does not sleep, but
rather returns an error, so as not to block the umount program.
(5) The fileserver iteration functions in vnode.c are now merged into
their callers and more heavily macroised around the cursor. vnode.c
is removed.
(6) Operations on a particular vnode are serialised on that vnode because
the server will lock that vnode whilst it operates on it, so a second
op sent will just have to wait.
(7) Fileservers are probed with FS.GetCapabilities before being used.
This is where service upgrade will be done.
(8) A callback interest on a fileserver is set up before an FS operation
is performed and passed through to afs_make_call() so that it can be
set on the vnode if the operation returns a callback. The callback
interest is passed through to afs_iget() also so that it can be set
there too.
In general, record updating is done on an as-needed basis when we try to
access servers, volumes or vnodes rather than offloading it to work items
and special threads.
Notes:
(1) Pre AFS-3.4 servers are no longer supported, though this can be added
back if necessary (AFS-3.4 was released in 1998).
(2) VBUSY is retried forever for the moment at intervals of 1s.
(3) /proc/fs/afs/<cell>/servers no longer exists.
Signed-off-by: David Howells <dhowells@redhat.com>
Add an RCU replaceable address list structure to hold a list of server
addresses. The list also holds the
To this end:
(1) A cell's VL server address list can be loaded directly via insmod or
echo to /proc/fs/afs/cells or dynamically from a DNS query for AFSDB
or SRV records.
(2) Anyone wanting to use a cell's VL server address must wait until the
cell record comes online and has tried to obtain some addresses.
(3) An FS server's address list, for the moment, has a single entry that
is the key to the server list. This will change in the future when a
server is instead keyed on its UUID and the VL.GetAddrsU operation is
used.
(4) An 'address cursor' concept is introduced to handle iteration through
the address list. This is passed to the afs_make_call() as, in the
future, stuff (such as abort code) that doesn't outlast the call will
be returned in it.
In the future, we might want to annotate the list with information about
how each address fares. We might then want to propagate such annotations
over address list replacement.
Whilst we're at it, we allow IPv6 addresses to be specified in
colon-delimited lists by enclosing them in square brackets.
Signed-off-by: David Howells <dhowells@redhat.com>
Overhaul the way that the in-kernel AFS client keeps track of cells in the
following manner:
(1) Cells are now held in an rbtree to make walking them quicker and RCU
managed (though this is probably overkill).
(2) Cells now have a manager work item that:
(A) Looks after fetching and refreshing the VL server list.
(B) Manages cell record lifetime, including initialising and
destruction.
(B) Manages cell record caching whereby threads are kept around for a
certain time after last use and then destroyed.
(C) Manages the FS-Cache index cookie for a cell. It is not permitted
for a cookie to be in use twice, so we have to be careful to not
allow a new cell record to exist at the same time as an old record
of the same name.
(3) Each AFS network namespace is given a manager work item that manages
the cells within it, maintaining a single timer to prod cells into
updating their DNS records.
This uses the reduce_timer() facility to make the timer expire at the
soonest timed event that needs happening.
(4) When a module is being unloaded, cells and cell managers are now
counted out using dec_after_work() to make sure the module text is
pinned until after the data structures have been cleaned up.
(5) Each cell's VL server list is now protected by a seqlock rather than a
semaphore.
Signed-off-by: David Howells <dhowells@redhat.com>
Allow VL server specifications to be given IPv6 addresses as well as IPv4
addresses, for example as:
echo add foo.org 1111:2222:3333:0:4444:5555:6666:7777 >/proc/fs/afs/cells
Note that ':' is the expected separator for separating IPv4 addresses, but
if a ',' is detected or no '.' is detected in the string, the delimiter is
switched to ','.
This also works with DNS AFSDB or SRV record strings fetched by upcall from
userspace.
Signed-off-by: David Howells <dhowells@redhat.com>
Keep and pass sockaddr_rxrpc addresses around rather than keeping and
passing in_addr addresses to allow for the use of IPv6 and non-standard
port numbers in future.
This also allows the port and service_id fields to be removed from the
afs_call struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Push the network namespace pointer to more places in AFS, including the
afs_server structure (which doesn't hold a ref on the netns).
In particular, afs_put_cell() now takes requires a net ns parameter so that
it can safely alter the netns after decrementing the cell usage count - the
cell will be deallocated by a background thread after being cached for a
period, which means that it's not safe to access it after reducing its
usage count.
Signed-off-by: David Howells <dhowells@redhat.com>
Lay the groundwork for supporting network namespaces (netns) to the AFS
filesystem by moving various global features to a network-namespace struct
(afs_net) and providing an instance of this as a temporary global variable
that everything uses via accessor functions for the moment.
The following changes have been made:
(1) Store the netns in the superblock info. This will be obtained from
the mounter's nsproxy on a manual mount and inherited from the parent
superblock on an automount.
(2) The cell list is made per-netns. It can be viewed through
/proc/net/afs/cells and also be modified by writing commands to that
file.
(3) The local workstation cell is set per-ns in /proc/net/afs/rootcell.
This is unset by default.
(4) The 'rootcell' module parameter, which sets a cell and VL server list
modifies the init net namespace, thereby allowing an AFS root fs to be
theoretically used.
(5) The volume location lists and the file lock manager are made
per-netns.
(6) The AF_RXRPC socket and associated I/O bits are made per-ns.
The various workqueues remain global for the moment.
Changes still to be made:
(1) /proc/fs/afs/ should be moved to /proc/net/afs/ and a symlink emplaced
from the old name.
(2) A per-netns subsys needs to be registered for AFS into which it can
store its per-netns data.
(3) Rather than the AF_RXRPC socket being opened on module init, it needs
to be opened on the creation of a superblock in that netns.
(4) The socket needs to be closed when the last superblock using it is
destroyed and all outstanding client calls on it have been completed.
This prevents a reference loop on the namespace.
(5) It is possible that several namespaces will want to use AFS, in which
case each one will need its own UDP port. These can either be set
through /proc/net/afs/cm_port or the kernel can pick one at random.
The init_ns gets 7001 by default.
Other issues that need resolving:
(1) The DNS keyring needs net-namespacing.
(2) Where do upcalls go (eg. DNS request-key upcall)?
(3) Need something like open_socket_in_file_ns() syscall so that AFS
command line tools attempting to operate on an AFS file/volume have
their RPC calls go to the right place.
Signed-off-by: David Howells <dhowells@redhat.com>
Provide the ability to enable and disable fscache cookies. A disabled cookie
will reject or ignore further requests to:
Acquire a child cookie
Invalidate and update backing objects
Check the consistency of a backing object
Allocate storage for backing page
Read backing pages
Write to backing pages
but still allows:
Checks/waits on the completion of already in-progress objects
Uncaching of pages
Relinquishment of cookies
Two new operations are provided:
(1) Disable a cookie:
void fscache_disable_cookie(struct fscache_cookie *cookie,
bool invalidate);
If the cookie is not already disabled, this locks the cookie against other
dis/enablement ops, marks the cookie as being disabled, discards or
invalidates any backing objects and waits for cessation of activity on any
associated object.
This is a wrapper around a chunk split out of fscache_relinquish_cookie(),
but it reinitialises the cookie such that it can be reenabled.
All possible failures are handled internally. The caller should consider
calling fscache_uncache_all_inode_pages() afterwards to make sure all page
markings are cleared up.
(2) Enable a cookie:
void fscache_enable_cookie(struct fscache_cookie *cookie,
bool (*can_enable)(void *data),
void *data)
If the cookie is not already enabled, this locks the cookie against other
dis/enablement ops, invokes can_enable() and, if the cookie is not an
index cookie, will begin the procedure of acquiring backing objects.
The optional can_enable() function is passed the data argument and returns
a ruling as to whether or not enablement should actually be permitted to
begin.
All possible failures are handled internally. The cookie will only be
marked as enabled if provisional backing objects are allocated.
A later patch will introduce these to NFS. Cookie enablement during nfs_open()
is then contingent on i_writecount <= 0. can_enable() checks for a race
between open(O_RDONLY) and open(O_WRONLY/O_RDWR). This simplifies NFS's cookie
handling and allows us to get rid of open(O_RDONLY) accidentally introducing
caching to an inode that's open for writing already.
One operation has its API modified:
(3) Acquire a cookie.
struct fscache_cookie *fscache_acquire_cookie(
struct fscache_cookie *parent,
const struct fscache_cookie_def *def,
void *netfs_data,
bool enable);
This now has an additional argument that indicates whether the requested
cookie should be enabled by default. It doesn't need the can_enable()
function because the caller must prevent multiple calls for the same netfs
object and it doesn't need to take the enablement lock because no one else
can get at the cookie before this returns.
Signed-off-by: David Howells <dhowells@redhat.com
Implement the ability for the root directory of a mounted AFS filesystem to
accept lookups of arbitrary directory names, to interpet the names as the names
of cells, to look the cell names up in the DNS for AFSDB records and to mount
the root.cell volume of the nominated cell on the pseudo-directory created by
lookup.
This facility is requested by passing:
-o autocell
to the mountpoint for which this is desired, usually the /afs mount.
To use this facility, a DNS upcall program is required for AFSDB records. This
can be obtained from:
http://people.redhat.com/~dhowells/afs/dns.afsdb.c
It should be compiled with -lresolv and -lkeyutils and installed as, say:
/usr/sbin/dns.afsdb
Then the following line needs to be added to /sbin/request-key.conf:
create dns_resolver afsdb:* * /usr/sbin/dns.afsdb %k
This can be tested by mounting AFS, say:
insmod dns_resolver.ko
insmod af-rxrpc.ko
insmod kafs.ko rootcell=grand.central.org
mount -t afs "#grand.central.org:root.cell." /afs -o autocell
and doing:
ls /afs/grand.central.org/
which should show:
archive/ cvs/ doc/ local/ project/ service/ software/ user/ www/
if it works.
Signed-off-by: Wang Lei <wang840925@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
If the DNS server returns an error, allow that to be cached in the DNS resolver
key in lieu of a value. Userspace passes the desired error number as an option
in the payload:
"#dnserror=<number>"
Userspace must map h_errno from the name resolution routines to an appropriate
Linux error before passing it up. Something like the following mapping is
recommended:
[HOST_NOT_FOUND] = ENODATA,
[TRY_AGAIN] = EAGAIN,
[NO_RECOVERY] = ECONNREFUSED,
[NO_DATA] = ENODATA,
in lieu of Linux errors specifically for representing name service errors. The
filesystem must map these errors appropropriately before passing them to
userspace. AFS is made to map ENODATA and EAGAIN to EDESTADDRREQ for the
return to userspace; ECONNREFUSED is allowed to stand as is.
The error can be seen in /proc/keys as a negative number after the description
of the key. Compare, for example, the following key entries:
2f97238c I--Q-- 1 53s 3f010000 0 0 dns_resol afsdb:grand.centrall.org: -61
338bfbbe I--Q-- 1 59m 3f010000 0 0 dns_resol afsdb:grand.central.org: 37
If the error option is supplied in the payload, the main part of the payload is
discarded. The key should have an expiry time set by userspace.
Signed-off-by: Wang Lei <wang840925@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Add DNS query support for AFS so that it can get the IP addresses of Volume
Location servers from the DNS using an AFSDB record.
This requires userspace support. /etc/request-key.conf must be configured to
invoke a helper for dns_resolver type keys with a subtype of "afsdb:" in the
description.
Signed-off-by: Wang Lei <wang840925@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
