Here is the big set of char/misc and other driver subsystem updates for
6.10-rc1. Nothing major here, just lots of new drivers and updates for
apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY
WVk7h01A0lHyacrzm5LN
=s95M
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Fixes: 3d83d4d490 ("coresight: tpiu: Move ACPI support from AMBA driver to platform driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/ad5e0d3ec081444a5ad04a7be277dde3afcb696b.1713858615.git.u.kleine-koenig@pengutronix.de
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-13-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Add support for the tpiu device in the platform driver, which can then be
used on ACPI based platforms. This change would now allow runtime power
management for ACPI based systems. The driver would try to enable the APB
clock if available. But first this renames and then refactors tpiu_probe()
and tpiu_remove(), making sure it can be used both for platform and AMBA
drivers. This also moves pm_runtime_put() from tpiu_probe() to the callers.
While here, this also sorts the included headers in alphabetic order.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-9-anshuman.khandual@arm.com
Refcnt is only ever accessed from either inside the coresight_mutex, or
the device's spinlock, making the atomic type and atomic_dec_return()
calls confusing and unnecessary. The only point of synchronisation
outside of these two types of locks is already done with a compare and
swap on 'mode', which a comment has been added for.
There was one instance of refcnt being used outside of a lock in TPIU,
but that can easily be fixed by making it the same as all the other
devices and adding a spinlock. Potentially in the future all the
refcounting and locking can be moved up into the core code, and all the
mostly duplicate code from the individual devices can be removed.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-8-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
These warnings would be hit with the following W=1 build change so
initialize all structs properly.
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231123120459.287578-2-james.clark@arm.com
This removes the need to do an additional lookup for the total number
of ports used and also removes the need to allocate an array of
refcounts which is just another representation of a connection array.
This was only used for link type devices, for regular devices a single
refcount on the coresight device is used.
There is a both an input and output refcount in case two link type
devices are connected together so that they don't overwrite each other's
counts.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-11-james.clark@arm.com
mode is stored as a local_t, but it is also passed around a lot as a
plain u32, so use the correct type wherever local_t isn't currently
used. This helps a little bit with readability.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-3-james.clark@arm.com
This merges from linux-arm at 860660fd82 ("ARM: 9055/1: mailbox:
arm_mhuv2: make remove callback return void") into char-misc-next to get
the amba fixes from Uwe.
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prepare the TPIU driver to make use of the CoreSight device access
abstraction layer. The driver touches the device even before the
coresight device is registered. Thus we could be accessing the
devices without a csdev. As we are about to use the abstraction
layer for accessing the device, pass in the access directly
to avoid having to deal with the un-initialised csdev.
Link: https://lore.kernel.org/r/20210110224850.1880240-5-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are about to introduce support for sysreg access to ETMv4.4+
component. Since there are generic routines that access the
registers (e.g, CS_LOCK/UNLOCK , claim/disclaim operations, timeout)
and in order to preserve the logic of these operations at a
single place we introduce an abstraction layer for the accesses
to a given device.
Link: https://lore.kernel.org/r/20210110224850.1880240-4-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All amba drivers return 0 in their remove callback. Together with the
driver core ignoring the return value anyhow, it doesn't make sense to
return a value here.
Change the remove prototype to return void, which makes it explicit that
returning an error value doesn't work as expected. This simplifies changing
the core remove callback to return void, too.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight
Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Takashi Iwai <tiwai@suse.de> # for sound
Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Functions that are annotated __exit are discarded for built-in drivers,
but the .remove callback in a device driver must still be kept around
to allow bind/unbind operations.
There is now a linker warning for the discarded symbol references:
`tmc_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tmc-core.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tmc-core.o
`tpiu_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tpiu.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tpiu.o
`etb_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-etb10.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-etb10.o
`static_funnel_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-funnel.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-funnel.o
`dynamic_funnel_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-funnel.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-funnel.o
`static_replicator_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-replicator.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-replicator.o
`dynamic_replicator_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-replicator.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-replicator.o
`catu_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-catu.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-catu.o
Remove all those annotations.
Fixes: 8b0cf82677 ("coresight: stm: Allow to build coresight-stm as a module")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201208182651.1597945-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC drivers/hwtracing/coresight/coresight-etm4x-core.o
CC drivers/hwtracing/coresight/coresight-etm4x-sysfs.o
CC drivers/hwtracing/coresight/coresight-stm.o
drivers/hwtracing/coresight/coresight-tpiu.c:53: warning: Cannot understand * @base: memory mapped base address for this component.
on line 53 - I thought it was a doc line
CC drivers/hwtracing/coresight/coresight-cpu-debug.o
CC drivers/hwtracing/coresight/coresight-catu.o
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201127175256.1092685-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow to build coresight-tpiu as a module, for ease of development.
- Kconfig becomes a tristate, to allow =m
- add a tpiu_remove function, for module unload
- add a MODULE_DEVICE_TABLE for autoloading on boot
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
So far we have reused the name of the "platform" device for
the CoreSight device. But this is not very intuitive when
we move to ACPI. Also, the ACPI device names have ":" in them
(e.g, ARMHC97C:01), which the perf tool doesn't like very much.
This patch introduces a generic naming scheme, givin more intuitive
names for the devices that appear on the CoreSight bus.
The names follow the pattern "prefix" followed by "index" (e.g, etm5).
We maintain a list of allocated devices per "prefix" to make sure
we don't allocate a new name when it is reprobed (e.g, due to
unsatisifed device dependencies). So, we maintain the list
of "fwnodes" of the parent devices to allocate a consistent name.
All devices except the ETMs get an index allocated in the order
of probing. ETMs get an index based on the CPU they are attached to.
TMC devices are named using "tmc_etf", "tmc_etb", and "tmc_etr"
prefixes depending on the configuration of the device.
The replicators and funnels are not classified as dynamic/static
anymore. One could easily figure that out by checking the presence
of "mgmt" registers under sysfs.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are about to introduce methods to clean up the platform data
as we switch to tracking the device reference from "name" to "fwnode
handles" for device connections. This requires us to drop the fwnode
handle references when the data is no longer required - i.e, when
the device probe fails or the device gets unregistered.
In order to consolidate the invocation of the cleanup, we delay the
platform probing to the very last minute, possibly before invoking
the coresight_register. Then, we leave the coresight core code to
do the clean up. i.e, if the coresight_register fails, it takes
care of freeing the data. Otherwise, coresight_unregister will
do the necessary operations.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are about to use a name independent of the parent AMBA device
name. As such, there is no need to have it in the platform description.
Let us move this to coresight description instead.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
So far we have hard coded the DT platform parsing code in
every driver. Introduce generic helper to parse the information
provided by the firmware in a platform agnostic manner, in preparation
for the ACPI support.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch to using the coresight device instead of the parent
amba device.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When operating in CPU-wide mode with an N:1 source/sink HW topology,
multiple CPUs can access a sink concurrently. As such reference counting
needs to happen when the device's spinlock is held to avoid racing with
other operations (start(), update(), stop()), such as:
session A Session B
----- -------
enable_sink
atomic_inc(refcount) = 1
...
atomic_dec(refcount) = 0 enable_sink
if (refcount == 0) disable_sink
atomic_inc()
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to handle device reference counting inside of the sink
drivers, add a return code to the sink::disable() operation so that
proper action can be taken if a sink has not been disabled.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the power only when we have successfully probed. Otherwise
leave it to the amba probe to do the rest.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Removed extra newline left after original modification]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In coresight perf mode, we need to prepare the sink before
starting a session, which is done via set_buffer call back.
We then proceed to enable the tracing. If we fail to start
the session successfully, we leave the sink configuration
unchanged. In order to make the operation atomic and to
avoid yet another call back to clear the buffer, we get
rid of the "set_buffer" call back and pass the buffer details
via enable() call back to the sink.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert component enable/disable messages from dev_info to dev_dbg.
When used with perf, the components in the paths are enabled/disabled
during each schedule of the run, which can flood the dmesg with these
messages. Moreover, they are only useful for debug purposes. So,
convert such messages to dev_dbg() which can be turned on as
needed.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Probing the TPIU driver under UBSan triggers an out-of-bounds shift
warning in coresight_timeout():
...
[ 5.677530] UBSAN: Undefined behaviour in drivers/hwtracing/coresight/coresight.c:929:16
[ 5.685542] shift exponent 64 is too large for 64-bit type 'long unsigned int'
...
On closer inspection things are exponentially out of whack because we're
passing a bitmask where a bit number should be. Amusingly, it seems that
both calls will find their expected values by sheer luck and appear to
succeed: 1 << FFCR_FON_MAN ends up at bit 64 which whilst undefined
evaluates as zero in practice, while 1 << FFSR_FT_STOPPED finds bit 2
(TCPresent) which apparently is usually tied high.
Following the examples of other drivers, define separate FOO and FOO_BIT
macros for masks vs. indices, and put things right.
CC: Robert Walker <robert.walker@arm.com>
CC: Mike Leach <mike.leach@linaro.org>
CC: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 11595db8e1 ("coresight: Fix disabling of CoreSight TPIU")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moving all kernel side CoreSight framework and drivers to SPDX identifier.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CoreSight TPIU should be disabled when tracing to other sinks to allow
them to operate at full bandwidth.
This patch fixes tpiu_disable_hw() to correctly disable the TPIU by
configuring the TPIU to stop on flush, initiating a manual flush, waiting
for the flush to complete and then waits for the TPIU to indicate it has
stopped.
Signed-off-by: Robert Walker <robert.walker@arm.com>
Tested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix ptr_ret.cocci warnings:
drivers/hwtracing/coresight/coresight-tpiu.c:163:1-3: WARNING: PTR_ERR_OR_ZERO can be used
drivers/hwtracing/coresight/coresight-funnel.c:217:1-3: WARNING: PTR_ERR_OR_ZERO can be used
drivers/hwtracing/coresight/coresight-dynamic-replicator.c:166:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per coresight standards, PIDR2 register has the following format :
[2-0] - JEP106_bits6to4
[3] - JEDEC, designer ID is specified by JEDEC.
However some of the drivers only use mask of 0x3 for the PIDR2 leaving
bits [3-2] unchecked, which could potentially match the component for
a different device altogether. This patch fixes the mask and the
corresponding id bits for the existing devices.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
amba_id are not supposed to change at runtime. All functions
working with const amba_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each coresight device prepares a description for coresight_register()
in struct coresight_desc. Once we register the device, the description is
useless and can be freed. The coresight_desc is small enough (48bytes on
64bit)i to be allocated on the stack. Hence use an automatic variable to
avoid a needless dynamic allocation and wasting the memory(which will only
be free'd when the device is destroyed).
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing boot time log for drivers that don't report useful information
other than they came up properly. The same information can be found in
sysFS once the system has booted and as such doesn't provide any value
in the boot log.
Reported-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
None of the Kconfig currently controlling compilation of any of
the files here are tristate, meaning that none of it currently
is being built as a module by anyone.
We need not be concerned about .remove functions and blocking the
unbind sysfs operations, since that was already done in a recent
commit.
Lets remove any remaining modular references, so that when reading the
drivers there is no doubt they are builtin-only.
All drivers get mostly the same changes, so they are handled in batch.
Changes are (1) convert to builtin_amba_driver, (2) delete module.h
include where unused, and (3) relocate the description into the
comments so we don't need MODULE_DESCRIPTION and associated tags.
The etm3x and etm4x use module_param_named, and have been adjusted
to just include moduleparam.h for that purpose.
In commit f309d44431 ("platform_device:
better support builtin boilerplate avoidance") we introduced the
builtin_driver macro.
Here we use that support and extend it to amba driver registration,
so where a driver is clearly non-modular and builtin-only, we can
update with the simple mapping of
module_amba_driver(...) ---> builtin_amba_driver(...)
Since module_amba_driver() uses the same init level priority as
builtin_amba_driver() the init ordering remains unchanged with
this commit.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding an operation mode to the sink->enable() API in order
to prevent simultaneous access from different callers.
TPIU and TMC won't be supplemented with the AUX area
API immediately and as such ignore the new mode.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moving PM runtime operations in Coresight devices enable() and
disable() API to the framework core when a path is setup. That
way the runtime core doesn't have to be involved everytime a
path is enabled. It also avoids calling runtime PM operations
in IRQ context.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The coresight drivers have absolutely no control over bind and unbind
operations triggered from sysfs. The operations simply can't be
cancelled or denied event when one or several tracing sessions are
under way. Since the memory associated to individual device is
invariably freed, the end result is a kernel crash when the path from
source to sink is travelled again as demonstrated here[1].
One solution could be to keep track of all the path (i.e tracing
session) that get created and iterate through the elements of those path
looking for the coresight device that is being removed. This proposition
doesn't scale well since there is no upper bound on the amount of
concurrent trace session that can be created.
With the above in mind, this patch prevent devices from being unbounded
from their driver by using the driver->suppress_bind_attr option. That way
trace sessions can be managed without fearing to loose devices.
Since device can't be removed anymore the xyz_remove() functions found in
each driver is also removed.
[1]. http://www.spinics.net/lists/arm-kernel/msg474952.html
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As can be seen from the datasheet of the CoreSight
Components, DDI0314H page A-19 the TPIU has a clock signal
apart from the AHB interconnect ("amba_pclk", that we're
already handling) called ATCLK, ARM Trace Clock, that SoC
implementers may provide from an entirely different clock
source. So to model this correctly create an optional
path for handling ATCLK alongside the PCLK so we don't
break old platforms that only define PCLK ("amba_pclk") but
still makes it possible for SoCs that have both clock signals
(such as the DB8500) to fetch and prepare/enable/disable/
unprepare both clocks in conjunction.
The ATCLK is enabled and disabled using the runtime PM
callbacks.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
the clk_prepare_enable() and clk_disable_unprepare() was
called and thus just increase and decreas the refcount by
one, without it reaching zero and actually disabling the
clock. Now the runtime PM callbacks will make sure the PCLK
is properly disabled after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Ux500 has a PrimeCell version 4B instead of the 3B as
supported by the driver, extend the match table to cover
this version.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keeping drivers related to HW tracing on ARM, i.e coresight,
under "drivers/coresight" doesn't make sense when other
architectures start rolling out technologies of the same
nature.
As such creating a new "drivers/hwtracing" directory where all
drivers of the same kind can reside, reducing namespace
pollution under "drivers/".
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
