This reverts commit 6fd47effe9, and the related self-test update
commit e14e0eaeb0 ("selftests/hid: add test for assigning a given
device to hid-generic").
It results in things like the scroll wheel on Logitech mice not working
after a reboot due to the kernel being confused about the state of the
high-resolution mode.
Quoting Benjamin Tissoires:
"The idea of 6fd47effe9 was to be able to call hid_bpf_rdesc_fixup()
once per reprobe of the device.
However, because the bpf filter can now change the quirk value, the
call had to be moved before the driver gets bound (which was
previously ensuring the unicity of the call).
The net effect is that now, in the case hid-generic gets loaded first
and then the specific driver gets loaded once the disk is available,
the value of ->quirks is not reset, but kept to the value that was set
by hid-generic (HID_QUIRK_INPUT_PER_APP).
Once hid-logitech-hidpp kicks in, that quirk is now set, which creates
two inputs for the single mouse: one keyboard for fancy shortcuts, and
one mouse node.
However, hid-logitech-hidpp expects only one input node to be attached
(it stores it into hidpp->input), and when a wheel event is received,
because there is some processing with high-resolution wheel events,
the wheel event is injected into hidpp->input.
And of course, when HID_QUIRK_INPUT_PER_APP is set, hidpp->input gets
the keyboard node, which doesn't have wheel event type, and the events
are ignored"
Reported-and-bisected-by: Mike Galbraith <efault@gmx.de>
Link: https://lore.kernel.org/all/CAHk-=wiUkQM3uheit2cNM0Y0OOY5qqspJgC8LkmOkJ2p2LDxcw@mail.gmail.com/
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Introduced new LCD_POWER_ constants to decouple the LCD subsystem from fbdev.
- Several drivers were updated to use the new LCD_POWER_ constants.
- Clarified the semantics of the lcd_ops.controls_device callback.
- Removed unnecessary includes and dependencies.
- Removed unused notifier functionality.
- Simplified code with scoped for-each loops.
- Fixed module autoloading for the ktz8866 driver.
- Updated device tree bindings to yaml format.
- Minor cleanups and improvements in various drivers.
-----BEGIN PGP SIGNATURE-----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=9n4l
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Improve handling of LCD power states and interactions with the fbdev
subsystem
- Introduce new LCD_POWER_ constants to decouple the LCD subsystem from
fbdev
- Update several drivers to use the new LCD_POWER_ constants
- Clarify the semantics of the lcd_ops.controls_device callback
- Remove unnecessary includes and dependencies
- Remove unused notifier functionality
- Simplify code with scoped for-each loops
- Fix module autoloading for the ktz8866 driver
- Update device tree bindings to yaml format
- Minor cleanups and improvements in various drivers
* tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (33 commits)
MAINTAINERS: Use Daniel Thompson's korg address for Backlight work
dt-bindings: backlight: Convert zii,rave-sp-backlight.txt to yaml
backlight: Remove notifier
backlight: ktz8866: Fix module autoloading
backlight: 88pm860x_bl: Simplify with scoped for each OF child loop
backlight: lcd: Do not include <linux/fb.h> in lcd header
backlight: lcd: Remove struct fb_videomode from set_mode callback
backlight: lcd: Replace check_fb with controls_device
HID: picoLCD: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: omap: Use lcd power constants
fbdev: imxfb: Use lcd power constants
fbdev: imxfb: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: clps711x-fb: Use lcd power constants
fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev
backlight: tdo24m: Use lcd power constants
backlight: platform_lcd: Use lcd power constants
backlight: platform_lcd: Remove match_fb from struct plat_lcd_data
backlight: platform_lcd: Remove include statement for <linux/backlight.h>
backlight: otm3225a: Use lcd power constants
backlight: ltv350qv: Use lcd power constants
...
mt_set_mode() accepts 2 boolean switches indicating whether the device
(if it follows Windows Precision Touchpad specification) should report
hardware buttons and/or surface contacts. For a casual reader it is
completely not clear, as they look at the call site, which exact mode
is being requested.
Define report_mode enum and change mt_set_mode() to accept is as
an argument instead. This allows to write:
mt_set_modes(hdev, HID_LATENCY_NORMAL, TOUCHPAD_REPORT_ALL);
or
mt_set_modes(hdev, HID_LATENCY_HIGH, TOUCHPAD_REPORT_BUTTONS);
which makes intent much more clear.
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/Zx_hBvg5Qa3KU3ta@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This patch introduces the following changes:
- Adds OF match table.
- Hardcodes hid-report-addr in the driver rather than fetching it
from the device property.
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
It was found that unloading 'hid_hyperv' module results in a devres
complaint:
...
hv_vmbus: unregistering driver hid_hyperv
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0
...
Call Trace:
<TASK>
? devres_release_group+0x1f2/0x2c0
? __warn+0xd1/0x1c0
? devres_release_group+0x1f2/0x2c0
? report_bug+0x32a/0x3c0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? devres_release_group+0x1f2/0x2c0
? devres_release_group+0x90/0x2c0
? rcu_is_watching+0x15/0xb0
? __pfx_devres_release_group+0x10/0x10
hid_device_remove+0xf5/0x220
device_release_driver_internal+0x371/0x540
? klist_put+0xf3/0x170
bus_remove_device+0x1f1/0x3f0
device_del+0x33f/0x8c0
? __pfx_device_del+0x10/0x10
? cleanup_srcu_struct+0x337/0x500
hid_destroy_device+0xc8/0x130
mousevsc_remove+0xd2/0x1d0 [hid_hyperv]
device_release_driver_internal+0x371/0x540
driver_detach+0xc5/0x180
bus_remove_driver+0x11e/0x2a0
? __mutex_unlock_slowpath+0x160/0x5e0
vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus]
...
And the issue seems to be that the corresponding devres group is not
allocated. Normally, devres_open_group() is called from
__hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver'
with 'mousevsc_hid_driver' stub and basically re-implements
__hid_device_probe() by calling hid_parse() and hid_hw_start() but not
devres_open_group(). hid_device_probe() does not call __hid_device_probe()
for it. Later, when the driver is removed, hid_device_remove() calls
devres_release_group() as it doesn't check whether hdev->driver was
initially overridden or not.
The issue seems to be related to the commit 62c68e7cee ("HID: ensure
timely release of driver-allocated resources") but the commit itself seems
to be correct.
Fix the issue by dropping the 'hid_dev->driver' override and using
hid_register_driver()/hid_unregister_driver() instead. Alternatively, it
would have been possible to rely on the default handling but
HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work
for mousevsc as-is.
Fixes: 62c68e7cee ("HID: ensure timely release of driver-allocated resources")
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Adds driver support for the USB-C model of Apple's Magic Trackpad 2.
The 2024 USB-C model is compatible with the existing Magic Trackpad 2
driver but has a different hardware ID.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219470
Signed-off-by: Callahan Kovacs <callahankovacs@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add `select RMI4_F3A` under `HID_RMI` in Kconfig to support buttons and GPIOs
on newer Synaptics HID RMI devices. Future devices will use F3A instead of F30,
but F30 is still selected for backward compatibility.
Signed-off-by: Vincent Huang <vincenth@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The tilt data contained in the Bluetooth packets of an Intuos Pro are
supposed to be interpreted as signed values. Simply casting the values
to type `char` is not guaranteed to work since it is implementation-
defined whether it is signed or unsigned. At least one user has noticed
the data being reported incorrectly on their system. To ensure that the
data is interpreted properly, we specifically cast to `signed char`
instead.
Link: https://github.com/linuxwacom/input-wacom/issues/445
Fixes: 4922cd26f0 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
CC: stable@vger.kernel.org # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The capacity level mappings are taken from:
https://support.steelseries.com/hc/en-us/articles/360049205612-How-do-I-know-the-Arctis-battery-level-how-do-I-charge-the-Arctis
Even if we have a percentage, exporting a capacity_level that matches
with the hardware warning levels means that upower can show warnings at
the same time as the hardware. So the headset starts beeping at the same
time as the critical warning notification appears :eyeroll:
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In some cases, the headset receiver will answer one of our requests with
garbage, or not at all. This is a problem when we only request battery
information once we've received a battery response, as we might never
get to request battery information again.
If the data from the receiver could not be parsed, and there's no
pending battery requests, schedule a new request.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Implement the hid get/set feature report function using a separate
address, rather than sharing an address with coordinate reporting, to
prevent feature events from being overwritten by coordinate events.
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Align with the i2c-hid driver by returning 0 instead of -EINVAL when
an empty response is received, ensuring that userspace programs utilizing
the hidraw node receive consistent return values.
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Since the report buffer is used by all kinds of drivers in various ways, let's
zero-initialize it during allocation to make sure that it can't be ever used
to leak kernel memory via specially-crafted report.
Fixes: 27ce405039 ("HID: fix data access in implement()")
Reported-by: Benoît Sevens <bsevens@google.com>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Replace with individual Minimum/Maximum calls to match the HID report
descriptor - HID doesn't have a Range field. Abstracting this is good
for hand-written descriptors but almost all tools will output min/max
instead so let's stick with that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20241017-import_bpf_6-13-v2-3-6a7acb89a97f@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
There is no need to kill the system entirely in HID with BUG_ON,
use WARN_ON to handle fault more gracefully which allow the system
to keep running.
Signed-off-by: He Lugang <helugang@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Microsoft defines two slightly different behaviors for pens that are
being used to erase. The first one, for pens that can be used while
inverted specifies that both 'Invert' and 'Eraser' usages should be
set while the pen is in contact and erasing. For pens that use an
eraser button though, they specify that only the 'Eraser' usage should
be set (while hovering, only the 'Invert' usage is to be set).
We used our internal 'invert_state' flag to determine if a pen has an
intent to erase (whether hovering or not). That flag was previously
only depending on the 'Invert' usage, which was sufficient for the
first type of pen (EMR) but not the second type (AES). This commit
makes the flag depend on either usage being set, and also renames it
to make its function more clear.
This change should not normally have an impact on userspace due to
both the existing driver and firmware design. The driver already only
determines tool type based on the first event in an interaction (e.g.
it will see the 'Invert' bit set when the eraser comes into prox and
then report BTN_TOOL_RUBBER for the rest of the interaction, even if
'Invert' is cleared). AES firmware is also careful to send reports
that work through a set of defined state transitions, even in the
corner-case where the eraser button is pressed when the pen is already
in contact with the display (Prox|Tip -> Prox -> 0 -> Invert -> Eraser).
Regardless, it seems reasonable to ensure the driver's state variables
match programmer expectation.
Link: https://learn.microsoft.com/en-us/windows-hardware/design/component-guidelines/windows-pen-states
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Thinkpad X1 Tablet Gen 3 keyboard has the same Lenovo specific quirks
as the original Thinkpad X1 Tablet keyboard.
Add the PID for the "Thinkpad X1 Tablet Gen 3 keyboard" to the hid-lenovo
driver to fix the FnLock, Mute and media buttons not working.
Suggested-by: Izhar Firdaus <izhar@fedoraproject.org>
Closes https://bugzilla.redhat.com/show_bug.cgi?id=2315395
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.
Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.
Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.
Signed-off-by: Kenneth Albanowski <kenalba@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Patch for Goodix 27c6:0d42 touchpads found in Inspiron 5515 laptops.
After resume from suspend, one can communicate with this device just fine.
We can read data from it or request a reset,
but for some reason the interrupt line will not go up
when new events are available.
(it can correctly respond to a reset with an interrupt tho)
The only way I found to wake this device up
is to send anything to it after ~1.5s mark,
for example a simple read request, or power mode change.
In this patch, I simply delay the resume steps with msleep,
this will cause the set_power request to happen after
the ~1.5s barrier causing the device to resume its event interrupts.
Sleep was used rather than delayed_work
to make this workaround as non-invasive as possible.
[jkosina@suse.com: shortlog update]
Signed-off-by: Bartłomiej Maryńczak <marynczakbartlomiej@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Wait for a response to the battery status request to set the device as
online. This prevent wrong power info when the dongle is connected but
the mouse is turned off.
Signed-off-by: Lode Willems <me@lodewillems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use a workqueue to periodically check the battery status
Signed-off-by: Lode Willems <me@lodewillems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In this initial the battery is only probed once, a following patch will add
periodic checking.
Signed-off-by: Lode Willems <me@lodewillems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add the vendor ID for Kysona and the product IDs for the M600 mouse
(both the dongle and the mouse itself)
Signed-off-by: Lode Willems <me@lodewillems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Duplicates in 'keys prevents kernel builds with clang, `make W=1` and
CONFIG_WERROR=y, for example:
drivers/hid/hid-debug.c:3443:18: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
3443 | [KEY_HANGEUL] = "HanGeul", [KEY_HANGUP_PHONE] = "HangUpPhone",
| ^~~~~~~~~
drivers/hid/hid-debug.c:3217:18: note: previous initialization is here
3217 | [KEY_HANGUEL] = "Hangeul", [KEY_HANJA] = "Hanja",
| ^~~~~~~~~
Fix this by removing them.
The logic of removal is that, remove...
1) if there is a constant that uses another defined constant, OR
2) the one that appears later in the list.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
A default case statement with a bare unreachable() was recently added to
fetch_item(), which by itself introduces undefined behavior. objtool
points this out with a few different warnings, depending on
configuration and compiler:
vmlinux.o: warning: objtool: fetch_item() falls through to next function ...
vmlinux.o: warning: objtool: hid_open_report() falls through to next function hid_parser_main()
vmlinux.o: warning: objtool: hid_scan_report() falls through to next function hid_allocate_device()
vmlinux.o: warning: objtool: hid_open_report+0x21b: can't find jump dest instruction at .text.hid_open_report+0x40f
Replacing unreachable() with BUG() is a typical fix to eliminate the
undefined behavior and make the default case well defined. However, in
this case, all possible values are enumerated in the switch statement,
so the default case can never actually happen, as proven with the
comment next to the item->size assignment. Just remove the default case
altogether, as the return statement would still be valid if the switch
statement were ever to be skipped.
Fixes: 61595012f2 ("HID: simplify code in fetch_item()")
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Closes: https://lore.kernel.org/20241010222451.GA3571761@thelio-3990X/
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Closes: https://lore.kernel.org/fe8c909e-bf02-4466-b3eb-0a4747df32e3@paulmck-laptop/
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HKsr
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024101301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for memory corruption regression in amd_sfh driver (Basavaraj
Natikar)
- fix for mis-reporting of BTN_TOOL_PEN and BTN_TOOL_RUBBER for AES
sensors tools in Wacom driver (Jason Gerecke)
- fix for unitialized variable use in intel-ish-hid driver
(SurajSonawane2415)
- a few device-specific quirks / device ID additions
* tag 'hid-for-linus-2024101301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: Hardcode (non-inverted) AES pens as BTN_TOOL_PEN
HID: amd_sfh: Switch to device-managed dmam_alloc_coherent()
HID: multitouch: Add quirk for HONOR MagicBook Art 14 touchpad
HID: multitouch: Add support for B2402FVA track point
HID: plantronics: Workaround for an unexcepted opposite volume key
hid: intel-ish-hid: Fix uninitialized variable 'rv' in ish_fw_xfer_direct_dma
Introduce sysfs attributes to the intel-ish-ipc driver to expose the base
and project firmware versions for ISH devices that load firmware from the
host.
The build tool embeds these versions into the ISH global manifest within
the firmware binary during the firmware build process. The driver, upon
loading the firmware, extracts this version information from the manifest
and makes it accessible via sysfs. The base version corresponds to the
firmware version provided in Intel's Firmware Development Kit (FDK), while
the project version reflects the vendor-customized firmware derived from
the FDK.
These attributes provide userspace tools and applications with the
ability to easily query the firmware versions, which is essential for
firmware validation and troubleshooting.
Example usages:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/firmware/base_version
5.8.0.7716
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/firmware/project_version
5.8.0.12472
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Introduce a driver for the Corsair Void family of headsets, supporting:
- Battery reporting (power_supply)
- Sidetone setting support
- Physical microphone location reporting
- Headset and receiver firmware version reporting
- Built-in alert triggering
- USB wireless_status
Tested with a Void Pro Wireless, Void Elite Wireless and a Void Elite Wired
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Unlike EMR tools which encode type information in their tool ID, tools
for AES sensors are all "generic pens". It is inappropriate to make use
of the wacom_intuos_get_tool_type function when dealing with these kinds
of devices. Instead, we should only ever report BTN_TOOL_PEN or
BTN_TOOL_RUBBER, as depending on the state of the Eraser and Invert
bits.
Reported-by: Daniel Jutz <daniel@djutz.com>
Closes: https://lore.kernel.org/linux-input/3cd82004-c5b8-4f2a-9a3b-d88d855c65e4@heusel.eu/
Bisected-by: Christian Heusel <christian@heusel.eu>
Fixes: 9c2913b962 ("HID: wacom: more appropriate tool type categorization")
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1041
Link: https://github.com/linuxwacom/input-wacom/issues/440
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Using the device-managed version allows to simplify clean-up in probe()
error path.
Additionally, this device-managed ensures proper cleanup, which helps to
resolve memory errors, page faults, btrfs going read-only, and btrfs
disk corruption.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Tested-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Tested-by: Richard <hobbes1069@gmail.com>
Tested-by: Skyler <skpu@pm.me>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Closes: https://lore.kernel.org/all/3b129b1f-8636-456a-80b4-0f6cce0eef63@hixontech.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219331
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The behavior of HONOR MagicBook Art 14 touchpad is not consistent
after reboots, as sometimes it reports itself as a touchpad, and
sometimes as a mouse.
Similarly to GLO-GXXX it is possible to call MT_QUIRK_FORCE_GET_FEATURE as a
workaround to force set feature in mt_set_input_mode() for such special touchpad
device.
[jkosina@suse.com: reword changelog a little bit]
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1040
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
By default the track point does not work on the Asus Expertbook B2402FVA.
From libinput record i got the ID of the track point device:
evdev:
# Name: ASUE1201:00 04F3:32AE
# ID: bus 0x18 vendor 0x4f3 product 0x32ae version 0x100
I found that the track point is functional, when i set the
MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU class for the reported device.
Signed-off-by: Stefan Blum <stefan.blum@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
One-element arrays as fake flex arrays are deprecated[1] as the kernel
has switched to C99 flexible-array members instead. This case, however,
has more complexity because it is a flexible array of flexible arrays
and this patch needs to be ready to enable the new compiler flag
-Wflex-array-member-not-at-end (coming in GCC-14) globally.
So, define a new struct type for the single reports:
struct report {
uint16_t size;
struct hostif_msg_hdr msg;
} __packed;
but without the payload (flex array) in it. And add this payload to the
"hostif_msg" structure. This way, in the "report_list" structure we can
declare a flex array of single reports which now do not contain another
flex array.
struct report_list {
[...]
struct report reports[];
} __packed;
Therefore, the "struct hostif_msg" is now made up of a header and a
payload. And the "struct report" uses only the "hostif_msg" header.
The perfect solution would be for the "report" structure to use the
whole "hostif_msg" structure but this is not possible due to nested
flexible arrays. Anyway, the end result is equivalent since this patch
does attempt to change the behaviour of the code.
Now as well, we have more clarity after the cast from the raw bytes to
the new structures. Refactor the code accordingly to use the new
structures.
Also, use "container_of()" whenever we need to retrieve a pointer to
the flexible structure, through which we can access the flexible array
if needed.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-and-one-element-arrays [1]
Closes: https://github.com/KSPP/linux/issues/333
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB723760CB93942370E92F00638BF72@AS8PR02MB7237.eurprd02.prod.outlook.com
[kees: tweaked commit log and dropped struct_size() uses]
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
