With the recent change to allow out-of-order decoder de-commit it
highlights a need to strengthen the in-order decoder commit guarantees.
As it stands match_free_decoder() ensures that if 2 regions are racing
decoder allocations the one that wins the race will get the lower id
decoder, but that still leaves the race to *commit* the decoder.
Rather than have this complicated case of "reserved in-order, but may
still commit out-of-order", just arrange for the reservation order to
match the commit-order. In other words, prevent subsequent allocations
until the last reservation is committed.
This precludes overlapping region creation events and requires the
previous regionN to either move forward to the decoder commit stage or
drop its reservation before regionN+1 can move forward. That is,
provided that regionN and regionN+1 decode through the same switch port.
As a side effect this allows match_free_decoder() to drop its dependency
on needing write access to the device_find_child() @data parameter [1].
Reported-by: Zijun Hu <quic_zijuhu@quicinc.com>
Closes: http://lore.kernel.org/20240905-const_dfc_prepare-v4-0-4180e1d5a244@quicinc.com
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964783668.81806.14962699553881333486.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously.
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: stable@vger.kernel.org
Fixes: 176baefb2e ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
In order to ensure root CXL ports are enabled upon cxl_acpi_probe()
when the 'cxl_port' driver is built as a module, arrange for the
module to be pre-loaded or built-in.
The "Fixes:" but no "Cc: stable" on this patch reflects that the issue
is merely by inspection since the bug that triggered the discovery of
this potential problem [1] is fixed by other means. However, a stable
backport should do no harm.
Fixes: 8dd2bc0f8e ("cxl/mem: Add the cxl_mem driver")
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964781969.81806.17276352414854540808.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
It turns out since its original introduction, pre-2.6.12,
bus_rescan_devices() has skipped devices that might be in the process of
attaching or detaching from their driver. For CXL this behavior is
unwanted and expects that cxl_bus_rescan() is a probe barrier.
That behavior is simple enough to achieve with bus_for_each_dev() paired
with call to device_attach(), and it is unclear why bus_rescan_devices()
took the position of lockless consumption of dev->driver which is racy.
The "Fixes:" but no "Cc: stable" on this patch reflects that the issue
is merely by inspection since the bug that triggered the discovery of
this potential problem [1] is fixed by other means. However, a stable
backport should do no harm.
Fixes: 8dd2bc0f8e ("cxl/mem: Add the cxl_mem driver")
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964781104.81806.4277549800082443769.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
When the CXL subsystem is built-in the module init order is determined
by Makefile order. That order violates expectations. The expectation is
that cxl_acpi and cxl_mem can race to attach. If cxl_acpi wins the race,
cxl_mem will find the enabled CXL root ports it needs. If cxl_acpi loses
the race it will retrigger cxl_mem to attach via cxl_bus_rescan(). That
flow only works if cxl_acpi can assume ports are enabled immediately
upon cxl_acpi_probe() return. That in turn can only happen in the
CONFIG_CXL_ACPI=y case if the cxl_port driver is registered before
cxl_acpi_probe() runs.
Fix up the order to prevent initialization failures. Ensure that
cxl_port is built-in when cxl_acpi is also built-in, arrange for
Makefile order to resolve the subsys_initcall() order of cxl_port and
cxl_acpi, and arrange for Makefile order to resolve the
device_initcall() (module_init()) order of the remaining objects.
As for what contributed to this not being found earlier, the CXL
regression environment, cxl_test, builds all CXL functionality as a
module to allow to symbol mocking and other dynamic reload tests. As a
result there is no regression coverage for the built-in case.
Reported-by: Gregory Price <gourry@gourry.net>
Closes: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net
Tested-by: Gregory Price <gourry@gourry.net>
Fixes: 8dd2bc0f8e ("cxl/mem: Add the cxl_mem driver")
Cc: stable@vger.kernel.org
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/172988474904.476062.7961350937442459266.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
CXL spec rev 3.0 section 8.2.9.2.1.2 defines the DRAM Event Record.
Fix decode memory event type field of DRAM Event Record.
For e.g. if value is 0x1 it will be reported as an Invalid Address
(General Media Event Record - Memory Event Type) instead of Scrub Media
ECC Error (DRAM Event Record - Memory Event Type) and so on.
Fixes: 2d6c1e6d60 ("cxl/mem: Trace DRAM Event Record")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20241014143003.1170-1-shiju.jose@huawei.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
The function cxl_endpoint_gather_bandwidth() invokes
pci_bus_read/write_XXX(), however, not all CXL devices are presently
implemented via PCI. It is recognized that the cxl_test has realized a CXL
device using a platform device.
Calling pci_bus_read/write_XXX() in cxl_test will cause kernel panic:
platform cxl_host_bridge.3: host supports CXL (restricted)
Oops: general protection fault, probably for non-canonical address 0x3ef17856fcae4fbd: 0000 [#1] PREEMPT SMP PTI
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? die_addr+0x38/0x60
? exc_general_protection+0x1f5/0x4b0
? asm_exc_general_protection+0x22/0x30
? pci_bus_read_config_word+0x1c/0x60
pcie_capability_read_word+0x93/0xb0
pcie_link_speed_mbps+0x18/0x50
cxl_pci_get_bandwidth+0x18/0x60 [cxl_core]
cxl_endpoint_gather_bandwidth.constprop.0+0xf4/0x230 [cxl_core]
? xas_store+0x54/0x660
? preempt_count_add+0x69/0xa0
? _raw_spin_lock+0x13/0x40
? __kmalloc_cache_noprof+0xe7/0x270
cxl_region_shared_upstream_bandwidth_update+0x9c/0x790 [cxl_core]
cxl_region_attach+0x520/0x7e0 [cxl_core]
store_targetN+0xf2/0x120 [cxl_core]
kernfs_fop_write_iter+0x13a/0x1f0
vfs_write+0x23b/0x410
ksys_write+0x53/0xd0
do_syscall_64+0x62/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
And Ying also reported a KASAN error with similar calltrace.
Reported-by: Huang, Ying <ying.huang@intel.com>
Closes: http://lore.kernel.org/87y12w9vp5.fsf@yhuang6-desk2.ccr.corp.intel.com
Fixes: a5ab0de0eb ("cxl: Calculate region bandwidth of targets with shared upstream link")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Huang, Ying <ying.huang@intel.com>
Link: https://patch.msgid.link/20241022030054.258942-1-lizhijian@fujitsu.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Misc cleanups:
- Convert devm_cxl_add_root() to return using ERR_CAST().
- cxl_test use dev_is_platform() instead of open coding.
- Remove duplicate include of header core.h in core/cdat.c.
- use scoped resource management to drop put_device() for cxl_port
- Use scoped_guard to drop device_lock() for cxl_port
- Refactor __devm_cxl_add_port() to drop gotos
- Rename cxl_setup_parent_dport to cxl_dport_init_aer and cxl_dport_map_regs()
to cxl_dport_map_ras().
- Refactor cxl_dport_init_aer() to be more concise.
- Remove duplicate host_bridge->native_aer checking in cxl_dport_init_ras_reporting().
- Fix comment for cxl_query_cmd()
Series to address HDM decoder initialization from DVSEC ranges:
- Only register non-zero DVSEC ranges.
- Remove duplicate implementation of waiting for memory_info_valid.
- Simplify the checking of mem_enabled in cxl_hdm_decode_init().
Remove locking from memory notifier callback
Series that refactors the code related to cxl mailboxes to be independent of the memory devices
- Move cxl headers in include/linux/ to include/cxl.
- Move all mailbox related data to 'struct cxl_mailbox'.
- Refactor mailbox APIs with 'struct cxl_mailbox' as input instead of memory device state.
Series that adds support for shared upstream link access_coordinate calculation for
configurations that have multiple targets under a switch or a root port where the
aggregated bandwidth can be greater than the upstream link of the switch/RP upstream
link.
- Preserve the CDAT access_coordinate from an endpoint
- Add the support for shared upstream link access_coordinate calculation
- Add documentation to explain how the calculations are done.
-----BEGIN PGP SIGNATURE-----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=gX4n
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (cxl) updates from Dave Jiang:
"Major changes address HDM decoder initialization from DVSEC ranges,
refactoring the code related to cxl mailboxes to be independent of the
memory devices, and adding support for shared upstream link
access_coordinate calculation, as well as a change to remove locking
from memory notifier callback.
In addition, a number of misc cleanups and refactoring of the code are
also included.
Address HDM decoder initialization from DVSEC ranges:
- Only register non-zero DVSEC ranges
- Remove duplicate implementation of waiting for memory_info_valid
- Simplify the checking of mem_enabled in cxl_hdm_decode_init()
Refactor the code related to cxl mailboxes to be independent of the memory devices:
- Move cxl headers in include/linux/ to include/cxl
- Move all mailbox related data to 'struct cxl_mailbox'
- Refactor mailbox APIs with 'struct cxl_mailbox' as input instead of
memory device state
Add support for shared upstream link access_coordinate calculation for
configurations that have multiple targets under a switch or a root
port where the aggregated bandwidth can be greater than the upstream
link of the switch/RP upstream link:
- Preserve the CDAT access_coordinate from an endpoint
- Add the support for shared upstream link access_coordinate calculation
- Add documentation to explain how the calculations are done
Remove locking from memory notifier callback.
Misc cleanups:
- Convert devm_cxl_add_root() to return using ERR_CAST()
- cxl_test use dev_is_platform() instead of open coding
- Remove duplicate include of header core.h in core/cdat.c
- use scoped resource management to drop put_device() for cxl_port
- Use scoped_guard to drop device_lock() for cxl_port
- Refactor __devm_cxl_add_port() to drop gotos
- Rename cxl_setup_parent_dport to cxl_dport_init_aer and
cxl_dport_map_regs() to cxl_dport_map_ras()
- Refactor cxl_dport_init_aer() to be more concise
- Remove duplicate host_bridge->native_aer checking in
cxl_dport_init_ras_reporting()
- Fix comment for cxl_query_cmd()"
* tag 'cxl-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl: Add documentation to explain the shared link bandwidth calculation
cxl: Calculate region bandwidth of targets with shared upstream link
cxl: Preserve the CDAT access_coordinate for an endpoint
cxl: Fix comment regarding cxl_query_cmd() return data
cxl: Convert cxl_internal_send_cmd() to use 'struct cxl_mailbox' as input
cxl: Move mailbox related bits to the same context
cxl: move cxl headers to new include/cxl/ directory
cxl/region: Remove lock from memory notifier callback
cxl/pci: simplify the check of mem_enabled in cxl_hdm_decode_init()
cxl/pci: Check Mem_info_valid bit for each applicable DVSEC
cxl/pci: Remove duplicated implementation of waiting for memory_info_valid
cxl/pci: Fix to record only non-zero ranges
cxl/pci: Remove duplicate host_bridge->native_aer checking
cxl/pci: cxl_dport_map_rch_aer() cleanup
cxl/pci: Rename cxl_setup_parent_dport() and cxl_dport_map_regs()
cxl/port: Refactor __devm_cxl_add_port() to drop goto pattern
cxl/port: Use scoped_guard()/guard() to drop device_lock() for cxl_port
cxl/port: Use __free() to drop put_device() for cxl_port
cxl: Remove duplicate included header file core.h
tools/testing/cxl: Use dev_is_platform()
...
The current bandwidth calculation aggregates all the targets. This simple
method does not take into account where multiple targets sharing under
a switch or a root port where the aggregated bandwidth can be greater than
the upstream link of the switch.
To accurately account for the shared upstream uplink cases, a new update
function is introduced by walking from the leaves to the root of the
hierarchy and clamp the bandwidth in the process as needed. This process
is done when all the targets for a region are present but before the
final values are send to the HMAT handling code cached access_coordinate
targets.
The original perf calculation path was kept to calculate the latency
performance data that does not require the shared link consideration.
The shared upstream link calculation is done as a second pass when all
the endpoints have arrived.
Testing is done via qemu with CXL hierarchy. run_qemu[1] is modified to
support several CXL hierarchy layouts. The following layouts are tested:
HB: Host Bridge
RP: Root Port
SW: Switch
EP: End Point
2 HB 2 RP 2 EP: resulting bandwidth: 624
1 HB 2 RP 2 EP: resulting bandwidth: 624
2 HB 2 RP 2 SW 4 EP: resulting bandwidth: 624
Current testing, perf number from SRAT/HMAT is hacked into the kernel
code. However with new QEMU support of Generic Target Port that's
incoming, the perf data injection is no longer needed.
[1]: https://github.com/pmem/run_qemu
Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://lore.kernel.org/linux-cxl/20240501152503.00002e60@Huawei.com/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20240904001316.1688225-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Keep the access_coordinate from the CDAT tables for region perf
calculations. The region perf calculation requires all participating
endpoints to have arrived in order to determine if there are limitations
of bandwidth data due to shared uplink.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20240904001316.1688225-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The code indicates that the min of n_commands and total commands
is returned. The comment incorrectly says it's the max(). Correct
comment to min().
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240913223216.3234173-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
With the CXL mailbox context split out, cxl_internal_send_cmd() can take
'struct cxl_mailbox' as an input parameter rather than
'struct memdev_dev_state'. Change input parameter for
cxl_internal_send_cmd() and fixup all impacted call sites.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240905223711.1990186-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Create a new 'struct cxl_mailbox' and move all mailbox related bits to
it. This allows isolation of all CXL mailbox data in order to export
some of the calls to external kernel callers and avoid exporting of CXL
driver specific bits such has device states. The allocation of
'struct cxl_mailbox' is also split out with cxl_mailbox_init() so the
mailbox can be created independently.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240905223711.1990186-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Group all cxl related kernel headers into include/cxl/ directory.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240905223711.1990186-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In testing Dynamic Capacity Device (DCD) support, a lockdep splat
revealed an ABBA issue between the memory notifiers and the DCD extent
processing code.[0] Changing the lock ordering within DCD proved
difficult because regions must be stable while searching for the proper
region and then the device lock must be held to properly notify the DAX
region driver of memory changes.
Dan points out in the thread that notifiers should be able to trust that
it is safe to access static data. Region data is static once the device
is realized and until it's destruction. Thus it is better to manage the
notifiers within the region driver.
Remove the need for a lock by ensuring the notifiers are active only
during the region's lifetime.
Furthermore, remove cxl_region_nid() because resource can't be NULL
while the region is stable.
Link: https://lore.kernel.org/all/66b4cf539a79b_a36e829416@iweiny-mobl.notmuch/ [0]
Cc: Ying Huang <ying.huang@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240904-fix-notifiers-v3-1-576b4e950266@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Cases can be divided into two categories which are DVSEC range enabled and
not enabled when HDM decoders exist but is not enabled. To avoid checking
info->mem_enabled, which indicates the enablement of DVSEC range, every
time, we can check !info->mem_enabled once in advance. This simplification
can make the code clearer.
No functional change intended.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-5-yanfei.xu@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In theory a device might set the mem_info_valid bit for a first range
after it is ready but before as second range has reached that state.
Therefore, the correct approach is to check the Mem_info_valid bit for
each applicable DVSEC range against HDM_COUNT, rather than only for the
DVSEC range 1. Consequently, let's move the check into the "for loop"
that handles each DVSEC range.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-4-yanfei.xu@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
commit ce17ad0d54 ("cxl: Wait Memory_Info_Valid before access memory
related info") added another implementation, which is
cxl_dvsec_mem_range_valid(), of waiting for memory_info_valid without
realizing it duplicated wait_for_valid(). Remove wait_for_valid() and
retain cxl_dvsec_mem_range_valid() as the former is hardcoded to check
only the Memory_Info_Valid bit of DVSEC range 1, while the latter allows
for selection between DVSEC range 1 or 2 via parameter.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-3-yanfei.xu@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The function cxl_dvsec_rr_decode() retrieves and records DVSEC ranges
into info->dvsec_range[], regardless of whether it is non-zero range,
and the variable info->ranges indicates the number of non-zero ranges.
However, in cxl_hdm_decode_init(), the validation for
info->dvsec_range[] occurs in a for loop that iterates based on
info->ranges. It may result in zero range to be validated but non-zero
range not be validated, in turn, the number of allowed ranges is to be
0. Address it by only record non-zero ranges.
This fix is not urgent as it requires a configuration that zeroes out
the first dvsec range while populating the second. This has not been
observed, but it is theoretically possible. If this gets picked up for
-stable, no harm done, but there is no urgency to backport.
Fixes: 560f785590 ("cxl/pci: Retrieve CXL DVSEC memory info")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-2-yanfei.xu@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The x86 implementation of range-to-target_node lookup (i.e.
phys_to_target_node() and memory_add_physaddr_to_nid()) relies on
numa_memblks.
Since numa_memblks are now part of the generic code, move these functions
from x86 to mm/numa_memblks.c and select CONFIG_NUMA_KEEP_MEMINFO when
CONFIG_NUMA_MEMBLKS=y for dax and cxl.
[rppt@kernel.org: fix build]
Link: https://lkml.kernel.org/r/ZtVfSt_zloPdDqVB@kernel.org
Link: https://lkml.kernel.org/r/20240807064110.1003856-26-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Zi Yan <ziy@nvidia.com> # for x86_64 and arm64
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cxl_dport_init_ras_reporting() already checks host_bridge->native_aer
before invoking cxl_disable_rch_root_ints(), so
cxl_disable_rch_root_ints() does not need to check it again.
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830061308.2327065-3-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
cxl_dport_map_ras() is used to map CXL RAS capability, the RCH AER
capability should not be mapped in the function but should mapped in
cxl_dport_init_ras_reporting(). Moving cxl_dport_map_ras() out of
cxl_dport_map_ras() and into cxl_dport_init_ras_reporting().
In cxl_dport_init_ras_reporting(), the AER capability position in RCRB
will be located but the position is only used in
cxl_dport_map_rch_aer(), getting the position in cxl_dport_map_rch_aer()
rather than cxl_dport_init_ras_reporting() is more reasonable and makes
the code clearer.
Besides, some local variables in cxl_dport_map_rch_aer() are
unnecessary, remove them to make the function more concise.
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830061308.2327065-2-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The name of cxl_setup_parent_dport() function is not clear, the function
is used to initialize AER and RAS capabilities on a dport, therefore,
rename the function to cxl_dport_init_ras_reporting(), it is easier for
user to understand what the function does. Besides, adjust the order of
the function parameters, the subject of cxl_dport_init_ras_reporting()
is a cxl dport, so a struct cxl_dport as the first parameter of the
function should be better.
cxl_dport_map_regs() is used to map CXL RAS capability on a cxl dport,
using cxl_dport_map_ras() as the function name.
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830061308.2327065-1-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In __devm_cxl_add_port(), there is a 'goto' to call put_device() for the
error cases between device_initialize() and device_add() to dereference
the 'struct device' of a new cxl_port. The 'goto' pattern in the case
can be removed by refactoring. Introducing a new function called
cxl_port_add() which is used to add the 'struct device' of a new
cxl_port to device hierarchy, moving the functions needing the help of
the 'goto' into cxl_port_add(), and using a scoped-based resource
management __free() to drop the open coded put_device() and the 'goto'
for the error cases.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwaei.com>
Link: https://patch.msgid.link/20240830013138.2256244-3-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
A device_lock() and device_unlock() pair can be replaced by a cleanup
helper scoped_guard() or guard(), that can enhance code readability. In
CXL subsystem, still use device_lock() and device_unlock() pairs for cxl
port resource protection, most of them can be replaced by a
scoped_guard() or a guard() simply.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830013138.2256244-2-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Using scope-based resource management __free() marco with a new helper
called put_cxl_port() to drop open coded the put_device() used to
dereference the 'struct device' in cxl_port.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830013138.2256244-1-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The header file core.h is included twice. Remove the last
one. The compilation test has passed.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20240830080016.3542184-1-lihongbo22@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Use ERR_CAST() as it is designed for casting an error pointer to
another type.
This macro utilizes the __force and __must_check modifiers, which instruct
the compiler to verify for errors at the locations where it is employed.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240829125235.3266865-1-liyuesong@vivo.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
cxl_setup_parent_dport() needs to get RCH dport AER capability address
from RCRB to disable AER interrupt. The function does not check if dport
is RCH dport, it will get a wrong pci_host_bridge structure by dport_dev
in VH case because dport_dev points to a pci device(RP or switch DSP)
rather than a pci host bridge device.
Fixes: f05fd10d13 ("cxl/pci: Add RCH downstream port AER register discovery")
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240809082750.3015641-2-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
New Changes:
- Refactor to a common struct for DRAM and general media CXL events
- Add abstract distance calculation support for CXL
- Add CXL maturity map documentation to detail current state of CXL enabling
- Add warning on mixed CXL VH and RCH/RCD hierachy to inform unsupported config
- Replace ENXIO with EBUSY for inject poison limit reached via debugfs
- Replace ENXIO with EBUSY for inject poison cxl-test support
- XOR math fixup for DPA to SPA translation. Current math works for MODULO arithmetic
where HPA==SPA, however not for XOR decode.
- Move pci config read in cxl_dvsec_rr_decode() to avoid unnecessary acess
Fixes:
- Add a fix to address race condition in CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
-----BEGIN PGP SIGNATURE-----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=HaEG
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
Relocate the reading of the DVSEC control register to immediately
before usage and avoid unnecessary PCI config access from the read
if DVSEC capability check, hdm_count check, or device validity check
results in failure.
Signed-off-by: Foryun Ma <foryun.ma@jaguarmicro.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240604032151.655-1-foryun.ma@jaguarmicro.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Series to fix XOR math for DPA to SPA translation
- Refactor and fold cxl_trace_hpa() into cxl_dpa_to_hpa()
- Complete DPA->HPA->SPA translation and correct XOR translation issue
- Add new method to verify a CXL target position
- Remove old method of CXL target position verifiation
The CXL Spec 3.1 Table 9-22 requires that the BIOS populate the CFMWS
target list in interleave target order. This means the calculations
the CXL driver added to determine positions when XOR math is in use,
along with the entire XOR vs Modulo call back setup is not needed.
A prior patch added a common method to verify positions.
Remove the now unused code related to the cxl_calc_hb_fn.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/2e2c32a2d0f1007e920b58712d15edad2e48d857.1719980933.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When a root decoder is configured the interleave target list is read
from the BIOS populated CFMWS structure. Per the CXL spec 3.1 Table
9-22 the target list is in interleave order. The CXL driver populates
its decoder target list in the same order and stores it in 'struct
cxl_switch_decoder' field "@target: active ordered target list in
current decoder configuration"
Given the promise of an ordered list, the driver can stop duplicating
the work of BIOS and simply check target positions against the ordered
list during region configuration.
The simplified check against the ordered list is presented here.
A follow-on patch will remove the unused code.
For Modulo arithmetic this is not a fix, only a simplification.
For XOR arithmetic this is a fix for HB IW of 3,6,12.
Fixes: f9db85bfec ("cxl/acpi: Support CXL XOR Interleave Math (CXIMS)")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/35d08d3aba08fee0f9b86ab1cef0c25116ca8a55.1719980933.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When a device reports a DPA in events like poison, general_media,
and dram, the driver translates that DPA back to an HPA. Presently,
the CXL driver translation only considers the Modulo position and
will report the wrong HPA for XOR configured root decoders.
Add a helper function that restores the XOR'd bits during DPA->HPA
address translation. Plumb a root decoder callback to the new helper
when XOR interleave arithmetic is in use. For Modulo arithmetic, just
let the callback be NULL - as in no extra work required.
Upon completion of a DPA->HPA translation a couple of checks are
performed on the result. One simply confirms that the calculated
HPA is within the address range of the region. That test is useful
for both Modulo and XOR interleave arithmetic decodes.
A second check confirms that the HPA is within an expected chunk
based on the endpoints position in the region and the region
granularity. An XOR decode disrupts the Modulo pattern making the
chunk check useless.
To align the checks with the proper decode, pull the region range
check inline and use the helper to do the chunk check for Modulo
decodes only.
A cxl-test unit test is posted for upstream review here:
https://lore.kernel.org/20240624210644.495563-1-alison.schofield@intel.com/
Fixes: 28a3ae4ff6 ("cxl/trace: Add an HPA to cxl_poison trace events")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Diego Garcia Rodriguez <diego.garcia.rodriguez@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/1a1ac880d9f889bd6384e657e810431b9a0a72e5.1719980933.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Although cxl_trace_hpa() is used to populate TRACE EVENTs with HPA
addresses the work it performs is a DPA to HPA translation not a
trace. Tidy up this naming by moving the minimal work done in
cxl_trace_hpa() into cxl_dpa_to_hpa() and use cxl_dpa_to_hpa()
for trace event callbacks.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/452a9b0c525b774c72d9d5851515ffa928750132.1719980933.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The CXL driver provides a debugfs interface offering users the
ability to inject and clear poison to a memdev. Once a user has
injected up to the devices limit further injection requests fail
with ENXIO until a clear poison is issued.
Users may not have device specs in hand or may want to intentionally
hit the limit and then clear. Replace the usual ENXIO return status
with EBUSY so users can recognize this failure.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/825bd4c67fb55a4373c4182d999ad49d4e6b4fe7.1720316188.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Each Host Bridge instance has a corresponding CXL Host Bridge Structure
(CHBS) ACPI table that identifies its capabilities. CHBS tables can be
two types (CXL 3.1 Table 9-21): The PCIe Root Complex Register Block
(RCRB) and CXL Host Bridge Component Registers (CHBCR).
If a Host Bridge is attached to a device that is operating in Restricted
CXL Device Mode (RCD), BIOS publishes an RCRB with the base address of
registers that describe its capabilities (CXL 3.1 sec. 9.11).
Instead, the new (CXL 2.0+) Component registers can only be accessed
by means of a base address published with a CHBCR (CXL 3.1 sec. 9.12).
If an eRCD (a device that forces the host-bridge into CXL 1.1 Restricted
CXL Host mode) is attached to a CXL 2.0+ Host-Bridge, the current CXL
specification does not define a mechanism for finding CXL-2.0-only
root-port component registers like HDM decoders and Extended Security
capability.
An algorithm to locate a CHBCR associated with an RCRB, would be too
invasive to land without some concrete motivation.
Therefore, just print a message to inform of unsupported config.
Count how many different CHBS "Version" types are detected by
cxl_get_chbs_iter(). Then make cxl_get_chbs() print a warning if that sum
is greater than 1.
Tested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240628175535.272472-1-fabio.m.de.francesco@linux.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When user send a mbox command whose opcode is CXL_MBOX_OP_CLEAR_LOG and
the in_payload is normal vendor debug log UUID according to
the CXL specification cxl_payload_from_user_allowed() will return
false unexpectedly, Sending mbox cmd operation fails and the kernel
log will print:
Clear Log: input payload not allowed.
All CXL devices that support a debug log shall support the Vendor Debug
Log to allow the log to be accessed through a common host driver, for any
device, all versions of the CXL specification define the same value with
Log Identifier of: 5e1819d9-11a9-400c-811f-d60719403d86
Refer to CXL spec r3.1 Table 8-71
Fix the definition value of DEFINE_CXL_VENDOR_DEBUG_UUID to match the
CXL specification.
Fixes: 472b1ce6e9 ("cxl/mem: Enable commands via CEL")
Signed-off-by: peng guo <engguopeng@buaa.edu.cn>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240710023112.8063-1-engguopeng@buaa.edu.cn
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The node ID of the region can be gotten via resource start address
directly. This simplifies the implementation of cxl_region_nid().
Signed-off-by: Huang Ying <ying.huang@intel.com>
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240618084639.1419629-4-ying.huang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
An abstract distance value must be assigned by the driver that makes
the memory available to the system. It reflects relative performance
and is used to place memory nodes backed by CXL regions in the appropriate
memory tiers allowing promotion/demotion within the existing memory tiering
mechanism.
The abstract distance is calculated based on the memory access latency
and bandwidth of CXL regions.
Signed-off-by: Huang, Ying <ying.huang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240618084639.1419629-3-ying.huang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In the memory hotplug notifier function of the CXL region,
cxl_region_perf_attrs_callback(), the node ID is obtained by checking
the host address range of the region. However, the address range
information is not available when the region is registered in
devm_cxl_add_region(). Additionally, this information may be removed
or added under the protection of cxl_region_rwsem during runtime. If
the memory notifier is called for nodes other than that backed by the
region, a race condition may occur, potentially leading to a NULL
dereference or an invalid address range.
The race condition is addressed by checking the availability of the
address range information under the protection of cxl_region_rwsem. To
enhance code readability and use guard(), the relevant code has been
moved into a newly added function: cxl_region_nid().
Fixes: 067353a46d ("cxl/region: Add memory hotplug notifier for cxl region")
Signed-off-by: Huang, Ying <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240618084639.1419629-2-ying.huang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/core/cxl_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_pci.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_mem.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_acpi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_pmem.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cxl/cxl_port.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240607-md-drivers-cxl-v2-1-0c61d95ee7a7@quicinc.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
cxl_event_common was an unfortunate naming choice and caused confusion with
the existing Common Event Record. Furthermore, its fields didn't map all
the common information between DRAM and General Media Events.
Remove cxl_event_common and introduce cxl_event_media_hdr to record common
information between DRAM and General Media events.
cxl_event_media_hdr, which is embedded in both cxl_event_gen_media and
cxl_event_dram, leverages the commonalities between the two events to
simplify their respective handling.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240607144423.48681-1-fabio.m.de.francesco@linux.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add the missing files into cxl driver api and fix the compile warning.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240614084755.59503-3-yaoxt.fnst@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Since interleave capability is not verified, if the interleave
capability of a target does not match the region need, committing decoder
should have failed at the device end.
In order to checkout this error as quickly as possible, driver needs
to check the interleave capability of target during attaching it to
region.
Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register),
bits 11 and 12 indicate the capability to establish interleaving in 3, 6,
12 and 16 ways. If these bits are not set, the target cannot be attached to
a region utilizing such interleave ways.
Additionally, bits 8 and 9 represent the capability of the bits used for
interleaving in the address, Linux tracks this in the cxl_port
interleave_mask.
Per CXL specification r3.1(8.2.4.20.13 Decoder Protection):
eIW means encoded Interleave Ways.
eIG means encoded Interleave Granularity.
in HPA:
if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used,
the interleave bits are none, the following check is ignored.
if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW + 8 - 1.
if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW - 1.
if the interleave mask is insufficient to cover the required interleave
bits, the target cannot be attached to the region.
Fixes: 384e624bb2 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240614084755.59503-2-yaoxt.fnst@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
cxl_dpa_to_region() looks up a region based on a memdev and DPA.
It wrongly assumes an endpoint found mapping the DPA is also of
a fully assembled region. When not true it leads to a null pointer
dereference looking up the region name.
This appears during testing of region lookup after a failure to
assemble a BIOS defined region or if the lookup raced with the
assembly of the BIOS defined region.
Failure to clean up BIOS defined regions that fail assembly is an
issue in itself and a fix to that problem will alleviate some of
the impact. It will not alleviate the race condition so let's harden
this path.
The behavior change is that the kernel oops due to a null pointer
dereference is replaced with a dev_dbg() message noting that an
endpoint was mapped.
Additional comments are added so that future users of this function
can more clearly understand what it provides.
Fixes: 0a105ab28a ("cxl/memdev: Warn of poison inject or clear to a mapped region")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240604003609.202682-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
