Merge an ACPI EC driver update, ACPI sysfs interface updates, an ACPI
library function update, and an ACPI APD driver update for 6.12-rc1:
- Do not release locks during operation region accesses in the ACPI EC
driver (Rafael Wysocki).
- Fix up the _STR handling in the ACPI device object sysfs interface,
make it represent the device object attributes as an attribute group
and make it rely on driver core functionality for sysfs attrubute
management (Thomas Weißschuh).
- Extend error messages printed to the kernel log when acpi_evaluate_dsm()
fails to include revision and function number (David Wang).
- Add a new AMDI0015 platform device ID to the ACPi APD driver for AMD
SoCs (Shyam Sundar S K).
* acpi-ec:
ACPI: EC: Do not release locks during operation region accesses
* acpi-sysfs:
ACPI: sysfs: remove return value of acpi_device_setup_files()
ACPI: sysfs: manage sysfs attributes through device core
ACPI: sysfs: manage attributes as attribute_group
ACPI: sysfs: evaluate _STR on each sysfs access
ACPI: sysfs: validate return type of _STR method
* acpi-utils:
ACPI: utils: Add rev/func to message when acpi_evaluate_dsm() fails
* acpi-soc:
ACPI: APD: Add AMDI0015 as platform device
RISC-V platforms need to use dependencies between PCI host bridge, Link
devices and the interrupt controllers to ensure probe order. The
dependency is like below.
Interrupt controller <-- Link Device <-- PCI Host bridge.
If there is no dependency between Link device and PCI Host Bridge,
then PCI devices may be probed prior to Link devices. If a PCI
device is probed before its Link device, we won't be able to find
its INTx mapping.
So, add the link device's HID to dependency honor list and clear the
dependency after probe is done so that the dependent devices are
unblocked to probe.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-9-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some architectures like RISC-V need to add dependencies without explicit
_DEP. Define a weak function which can be implemented by the architecture.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-7-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
RISC-V PLIC and APLIC will have dependency from devices using GSI. So, add
these devices to the honor list.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-6-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some architectures like RISC-V will use implicit dependencies like GSI
map to create dependencies between interrupt controller and devices. To
support doing that, the function which creates the dependency, is
refactored bit and made public so that dependency can be added from
outside of scan.c as well.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-5-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Unlike OF framework, the irqchip probe using IRQCHIP_ACPI_DECLARE has no
order defined. Depending on the Makefile is not a good idea. So,
usually it is worked around by mandating only root interrupt controller
probed using IRQCHIP_ACPI_DECLARE and other interrupt controllers are
probed via cascade mechanism.
However, this is also not a clean solution because if there are multiple
root controllers (ex: RINTC in RISC-V which is per CPU) which need to be
probed first, then the cascade will happen for every root controller.
So, introduce an architecture specific weak function
arch_sort_irqchip_probe() to order the probing of the interrupt
controllers which can be implemented by different architectures as per
their interrupt controller hierarchy.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-3-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 60fa6ae6e6 ("ACPI: EC: Install address space handler at the
namespace root") caused _REG methods for EC operation regions outside
the EC device scope to be evaluated which on some systems leads to the
evaluation of _REG methods in the scopes of device objects representing
devices that are not present and not functional according to the _STA
return values. Some of those device objects represent EC "alternatives"
and if _REG is evaluated for their operation regions, the platform
firmware may be confused and the platform may start to behave
incorrectly.
To avoid this problem, only evaluate _REG for EC operation regions
located in the scopes of device objects representing known-to-be-present
devices.
For this purpose, partially revert commit 60fa6ae6e6 and trigger the
evaluation of _REG for EC operation regions from acpi_bus_attach() for
the known-valid devices.
Fixes: 60fa6ae6e6 ("ACPI: EC: Install address space handler at the namespace root")
Link: https://lore.kernel.org/linux-acpi/1f76b7e2-1928-4598-8037-28a1785c2d13@redhat.com
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2298938
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2302253
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/23612351.6Emhk5qWAg@rjwysocki.net
Now that the ACPI sysfs attributes are organized around an
attribute_group, the device core can manage them.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-4-058ab0667fa8@weissschuh.net
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Core:
* Support for the "ats-supported" device-tree property.
* Removal of the 'ops' field from 'struct iommu_fwspec'.
* Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users.
* Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem.
* Remove stale documentation.
* Add missing MODULE_DESCRIPTION() macro.
* Misc cleanups.
- Allwinner Sun50i:
* Ensure bypass mode is disabled on H616 SoCs.
* Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker.
* Add new device-tree compatible strings.
- AMD Vi:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
- Arm SMMUv2:
* Print much more useful information on context faults.
* Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
* Add new Qualcomm device-tree bindings.
- Arm SMMUv3:
* Support for hardware update of access/dirty bits and reporting via
IOMMUFD.
* More driver rework from Jason, this time updating the PASID/SVA support
to prepare for full IOMMUFD support.
* Add missing MODULE_DESCRIPTION() macro.
* Minor fixes and cleanups.
- NVIDIA Tegra:
* Fix for benign fwspec initialisation issue exposed by rework on the
core branch.
- Intel VT-d:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
* Use READ_ONCE() to read volatile descriptor status.
* Remove support for handling Execute-Requested requests.
* Avoid calling iommu_domain_alloc().
* Minor fixes and refactoring.
- Qualcomm MSM:
* Updates to the device-tree bindings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
/WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
=xvLD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
Now that iommu_fwspec_init() can signal for probe deferral directly,
acpi_iommu_fwspec_ops() is unneeded and can be cleaned up.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/011e39e275aba3ad451c5a1965ca8ddf20ed36c2.1719919669.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
There's no real need for callers to resolve ops from a fwnode in order
to then pass both to iommu_fwspec_init() - it's simpler and more sensible
for that to resolve the ops itself. This in turn means we can centralise
the notion of checking for a present driver, and enforce that fwspecs
aren't allocated unless and until we know they will be usable.
Also use this opportunity to modernise with some "new" helpers that
arrived shortly after this code was first written; the generic
fwnode_handle_get() clears up that ugly get/put mismatch, while
of_fwnode_handle() can now abstract those open-coded dereferences.
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0e2727adeb8cd73274425322f2f793561bdc927e.1719919669.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
struct acpi_scan_handler has a detach callback that is used to remove
a driver when a bus is changed. When interacting with an eject-request,
the detach callback is called before _EJ0.
This means the ACPI processor driver can't use _STA to determine if a
CPU has been made not-present, or some of the other _STA bits have been
changed. acpi_processor_remove() needs to know the value of _STA after
_EJ0 has been called.
Add a post_eject callback to struct acpi_scan_handler. This is called
after acpi_scan_hot_remove() has successfully called _EJ0. Because
acpi_scan_check_and_detach() also clears the handler pointer,
it needs to be told if the caller will go on to call
acpi_bus_post_eject(), so that acpi_device_clear_enumerated()
and clearing the handler pointer can be deferred.
An extra flag is added to flags field introduced in the previous
patch to achieve this.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-11-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Precursor patch adds the ability to pass a uintptr_t of flags into
acpi_scan_check_and detach() so that additional flags can be
added to indicate whether to defer portions of the eject flow.
The new flag follows in the next patch.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-10-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Including:
- Core:
- IOMMU memory usage observability - This will make the memory used
for IO page tables explicitly visible.
- Simplify arch_setup_dma_ops()
- Intel VT-d:
- Consolidate domain cache invalidation
- Remove private data from page fault message
- Allocate DMAR fault interrupts locally
- Cleanup and refactoring
- ARM-SMMUv2:
- Support for fault debugging hardware on Qualcomm implementations
- Re-land support for the ->domain_alloc_paging() callback
- ARM-SMMUv3:
- Improve handling of MSI allocation failure
- Drop support for the "disable_bypass" cmdline option
- Major rework of the CD creation code, following on directly from the
STE rework merged last time around.
- Add unit tests for the new STE/CD manipulation logic
- AMD-Vi:
- Final part of SVA changes with generic IO page fault handling
- Renesas IPMMU:
- Add support for R8A779H0 hardware
- A couple smaller fixes and updates across the sub-tree
-----BEGIN PGP SIGNATURE-----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=JUzp
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core:
- IOMMU memory usage observability - This will make the memory used
for IO page tables explicitly visible.
- Simplify arch_setup_dma_ops()
Intel VT-d:
- Consolidate domain cache invalidation
- Remove private data from page fault message
- Allocate DMAR fault interrupts locally
- Cleanup and refactoring
ARM-SMMUv2:
- Support for fault debugging hardware on Qualcomm implementations
- Re-land support for the ->domain_alloc_paging() callback
ARM-SMMUv3:
- Improve handling of MSI allocation failure
- Drop support for the "disable_bypass" cmdline option
- Major rework of the CD creation code, following on directly from
the STE rework merged last time around.
- Add unit tests for the new STE/CD manipulation logic
AMD-Vi:
- Final part of SVA changes with generic IO page fault handling
Renesas IPMMU:
- Add support for R8A779H0 hardware
... and a couple smaller fixes and updates across the sub-tree"
* tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits)
iommu/arm-smmu-v3: Make the kunit into a module
arm64: Properly clean up iommu-dma remnants
iommu/amd: Enable Guest Translation after reading IOMMU feature register
iommu/vt-d: Decouple igfx_off from graphic identity mapping
iommu/amd: Fix compilation error
iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry
iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()
iommu/arm-smmu-v3: Move the CD generation for SVA into a function
iommu/arm-smmu-v3: Allocate the CD table entry in advance
iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr()
iommu/arm-smmu-v3: Consolidate clearing a CD table entry
iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function
iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry()
iommu/arm-smmu-v3: Add an ops indirection to the STE code
iommu/arm-smmu-qcom: Don't build debug features as a kernel module
iommu/amd: Add SVA domain support
iommu: Add ops->domain_alloc_sva()
iommu/amd: Initial SVA support for AMD IOMMU
iommu/amd: Add support for enable/disable IOPF
iommu/amd: Add IO page fault notifier handler
...
The return value of _STA with the "present" bit unset and the "enabled"
bit set is clearly invalid as per the ACPI specification, Section 6.3.7
"_STA (Device Status)", so make the ACPI device enumeration code
disregard devices with such _STA return values.
Also, because this implies that status.enabled will only be set if
status.present is set too, acpi_device_is_enabled() can be modified
to simply return the value of the former.
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status
Link: https://lore.kernel.org/linux-acpi/88179311a503493099028c12ca37d430@huawei.com/
Suggested-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
The dma_base, size and iommu arguments are only used by ARM, and can
now easily be deduced from the device itself, so there's no need to pass
them through the callchain as well.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com> # For Hyper-V
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/5291c2326eab405b1aa7693aa964e8d3cb7193de.1713523152.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On the Toshiba Encore WT10-A tablet the BATC battery ACPI device depends
on 3 other devices:
Name (_DEP, Package (0x03) // _DEP: Dependencies
{
I2C1,
GPO2,
GPO0
})
acpi_scan_check_dep() adds all 3 of these to the acpi_dep_list and then
before an acpi_device is created for the BATC handle (and thus before
acpi_scan_dep_init() runs) acpi_scan_clear_dep() gets called for both
GPIO depenencies, with free_when_met not set for the dependencies.
Since there is no adev for BATC yet, there also is no dep_unmet to
decrement. The only result of acpi_scan_clear_dep() in this case is
dep->met getting set.
Soon after acpi_scan_clear_dep() has been called for the GPIO dependencies
the acpi_device gets created for the BATC handle and acpi_scan_dep_init()
runs, this sees 3 dependencies on the acpi_dep_list and initializes
unmet_dep to 3. Later when the dependency for I2C1 is met unmet_dep
becomes 2, but since the 2 GPIO deps where already met it never becomes 0
causing battery monitoring to not work.
Fix this by modifying acpi_scan_dep_init() to not increase dep_met for
dependencies which have already been marked as being met.
Fixes: 3ba12d8de3 ("ACPI: scan: Reduce overhead related to devices with dependencies")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Follow the struct acpi_device_ops approach and introduce typedef:s
for the members. It makes code less verbose and more particular on
what parameters we take or types we use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Check for an error and return it as it's the usual way to handle this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_iommu_configure_id() implementation has a misleading comment
since after it the flow does something different to what it states.
Move the commit to the caller and with that unshadow the error code
inside acpi_iommu_configure_id().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To replace list_empty() + list_first_entry() pair to simplify code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup
and locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates
-----BEGIN PGP SIGNATURE-----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=h9kz
-----END PGP SIGNATURE-----
Merge tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup and
locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power
management trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates"
* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
ALSA: hda/tas2781: remove unnecessary runtime_pm calls
ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
ALSA: aaci: Delete unused variable in aaci_do_suspend
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: hda/tas2781: restore power state after system_resume
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
ASoC: cs35l56: Add support for CS35L54 and CS35L57
ASoC: Intel: catpt: Carefully use PCI bitwise constants
ALSA: hda: hda_component: Include sound/hda_codec.h
ALSA: hda: hda_component: Add missing #include guards
...
Add the ACPI HIDs and smi_node descriptions for the CS35L54 and CS35L57
Boosted Smart Amplifiers.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240308135900.603192-4-rf@opensource.cirrus.com>
There is no particular reason why device object subtree rescans in
acpi_scan_device_check() and acpi_scan_device_check() should be carried
out differently, so move the rescan code into a new function called
acpi_scan_rescan_bus() and make both the functions above invoke it.
While at it, in the Device Check case, start the device object subtree
rescan mentioned above from the target device's parent, as per the
specification. [1]
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#device-object-notification-values # [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The underlying problem is the handling of the enabled bit in device
status (bit 1 of _STA return value) which is required by the ACPI
specification to be observed in addition to the present bit (bit 0
of _STA return value) [1], but Linux does not observe it.
Since Linux has not looked at that bit for a long time, it is generally
risky to start obseving it in all device enumeration cases, especially
at the system initialization time, but it can be observed when the
kernel receives a Bus Check or Device Check notification indicating a
change in device configuration. In those cases, seeing the enabled bit
clear may be regarded as an indication that the device at hand should
not be used any more.
For this reason, rework the handling of Device Check and Bus Check
notifications in the ACPI core device enumeration code in the
following way:
1. Rename acpi_bus_trim_one() to acpi_scan_check_and_detach() and make
it check device status if its second argument is not NULL, in which
case it will detach scan handlers or ACPI drivers from devices whose
_STA returns the enabled bit clear.
2. Make acpi_scan_device_check() and acpi_scan_bus_check() invoke
acpi_scan_check_and_detach() with a non-NULL second argument
unconditionally, so scan handlers and ACPI drivers are detached
from the target device and its ancestors if their _STA returns the
enabled bit clear.
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status # [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Modify acpi_processor_add() return an error if _STA returns the enabled
bit clear for the given processor device, so as to avoid using processors
that don't decode their resources, as per the ACPI specification. [1]
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status # [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Relocate acpi_bus_trim_one() (without modifications) so as to avoid the
need to add a forward declaration of it in a subsequent patch.
No functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It is generally invalid to fail a Device Check notification if the scan
handler has not been attached to the given device after a bus rescan,
because there may be valid reasons for the scan handler to refuse
attaching to the device (for example, the device is not ready).
For this reason, modify acpi_scan_device_check() to return 0 in that
case without printing a warning.
While at it, reduce the log level of the "already enumerated" message
in the same function, because it is only interesting when debugging
notification handling
Fixes: 443fc82022 ("ACPI / hotplug: Rework generic code to handle suprise removals")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Inside IVSC, switching ownership requires an interface with two
different hardware modules, ACE and CSI. The software interface
to these modules is based on Intel MEI framework. Usually mei
client devices are dynamically created, so the info of consumers
depending on mei client devices is not present in the firmware
tables.
This causes problems with the probe ordering with respect to
drivers for consumers of these MEI client devices. But on these
camera sensor devices, the ACPI nodes describing the sensors all
have a _DEP dependency on the matching MEI bus ACPI device, so
adding IVSC MEI bus ACPI device to acpi_honor_dep_ids allows
solving the probe-ordering problem by deferring the enumeration of
ACPI-devices which have a _DEP dependency on an IVSC mei bus ACPI
device.
Add INTC10CF, the HID of IVSC MEI bus ACPI device on MTL platform,
to acpi_honor_dep_ids.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Including:
- Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to
a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
- ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm SMMU
implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
- Intel VT-d driver:
- Cleanup and refactoring
- AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
- Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
- Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
- Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes
-----BEGIN PGP SIGNATURE-----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=q751
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
Highlights:
- Intel PMC / PMT / TPMI / uncore-freq / vsec improvements and
new platform support
- AMD PMC / PMF improvements and new platform support
- AMD ACPI based Wifi band RFI mitigation feature (WBRF)
- WMI bus driver cleanups and improvements (Armin Wolf)
- acer-wmi Predator PHN16-71 support
- New Silicom network appliance EC LEDs / GPIOs driver
The following is an automated git shortlog grouped by driver:
ACPI:
- scan: Add LNXVIDEO HID to ignore_serial_bus_ids[]
Add Silicom Platform Driver:
- Add Silicom Platform Driver
Documentation/driver-api:
- Add document about WBRF mechanism
ISST:
- Process read/write blocked feature status
Merge tag 'platform-drivers-x86-amd-wbrf-v6.8-1' into review-hans:
- Merge tag 'platform-drivers-x86-amd-wbrf-v6.8-1' into review-hans
Merge tag 'platform-drivers-x86-v6.7-3' into pdx86/for-next:
- Merge tag 'platform-drivers-x86-v6.7-3' into pdx86/for-next
Merge tag 'platform-drivers-x86-v6.7-6' into pdx86/for-next:
- Merge tag 'platform-drivers-x86-v6.7-6' into pdx86/for-next
Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS:
- Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS
acer-wmi:
- add fan speed monitoring for Predator PHN16-71
- Depend on ACPI_VIDEO instead of selecting it
- Add platform profile and mode key support for Predator PHN16-71
asus-laptop:
- remove redundant braces in if statements
asus-wmi:
- Convert to platform remove callback returning void
clk:
- x86: lpss-atom: Drop unneeded 'extern' in the header
dell-smbios-wmi:
- Stop using WMI chardev
- Use devm_get_free_pages()
hp-bioscfg:
- Removed needless asm-generic
hp-wmi:
- Convert to platform remove callback returning void
intel-uncore-freq:
- Add additional client processors
intel-wmi-sbl-fw-update:
- Use bus-based WMI interface
intel/pmc:
- Call pmc_get_low_power_modes from platform init
ips:
- Remove unused debug code
platform/mellanox:
- mlxbf-tmfifo: Remove unnecessary bool conversion
platform/x86/amd:
- Add support for AMD ACPI based Wifi band RFI mitigation feature
platform/x86/amd/pmc:
- Modify SMU message port for latest AMD platform
- Add 1Ah family series to STB support list
- Add idlemask support for 1Ah family
- call amd_pmc_get_ip_info() during driver probe
- Add VPE information for AMDI000A platform
- Send OS_HINT command for AMDI000A platform
platform/x86/amd/pmf:
- Return a status code only as a constant in two functions
- Return directly after a failed apmf_if_call() in apmf_sbios_heartbeat_notify()
- dump policy binary data
- Add capability to sideload of policy binary
- Add facility to dump TA inputs
- Make source_as_str() as non-static
- Add support to update system state
- Add support update p3t limit
- Add support to get inputs from other subsystems
- change amd_pmf_init_features() call sequence
- Add support for PMF Policy Binary
- Change return type of amd_pmf_set_dram_addr()
- Add support for PMF-TA interaction
- Add PMF TEE interface
platform/x86/dell:
- alienware-wmi: Use kasprintf()
platform/x86/intel-uncore-freq:
- Process read/write blocked feature status
platform/x86/intel/pmc:
- Add missing extern
- Add Lunar Lake M support to intel_pmc_core driver
- Add Arrow Lake S support to intel_pmc_core driver
- Add ssram_init flag in PMC discovery in Meteor Lake
- Move common code to core.c
- Add PSON residency counter for Alder Lake
- Add regmap for Tiger Lake H PCH
- Add PSON residency counter
- Fix in mtl_punit_pmt_init()
- Fix in pmc_core_ssram_get_pmc()
- Show Die C6 counter on Meteor Lake
- Add debug attribute for Die C6 counter
- Read low power mode requirements for MTL-M and MTL-P
- Retrieve LPM information using Intel PMT
- Display LPM requirements for multiple PMCs
- Find and register PMC telemetry entries
- Cleanup SSRAM discovery
- Allow pmc_core_ssram_init to fail
platform/x86/intel/pmc/arl:
- Add GBE LTR ignore during suspend
platform/x86/intel/pmc/lnl:
- Add GBE LTR ignore during suspend
platform/x86/intel/pmc/mtl:
- Use return value from pmc_core_ssram_init()
platform/x86/intel/pmt:
- telemetry: Export API to read telemetry
- Add header to struct intel_pmt_entry
platform/x86/intel/tpmi:
- Move TPMI ID definition
- Modify external interface to get read/write state
- Don't create devices for disabled features
platform/x86/intel/vsec:
- Add support for Lunar Lake M
- Add base address field
- Add intel_vsec_register
- Assign auxdev parent by argument
- Use cleanup.h
- remove platform_info from vsec device structure
- Move structures to header
- Remove unnecessary return
- Fix xa_alloc memory leak
platform/x86/intel/wmi:
- thunderbolt: Use bus-based WMI interface
silicom-platform:
- Fix spelling mistake "platfomr" -> "platform"
wmi:
- linux/wmi.h: fix Excess kernel-doc description warning
- Simplify get_subobj_info()
- Decouple ACPI notify handler from wmi_block_list
- Create WMI bus device first
- Use devres for resource handling
- Remove ACPI handlers after WMI devices
- Remove unused variable in address space handler
- Remove chardev interface
- Remove debug_event module param
- Remove debug_dump_wdg module param
- Add to_wmi_device() helper macro
- Add wmidev_block_set()
x86-android-tablets:
- Fix an IS_ERR() vs NULL check in probe
- Fix backlight ctrl for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add audio codec info for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add support for SPI device instantiation
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmWb29kUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wliAf/bjJw8xGjzKYzipUhhDhM/tPdmuCs
9zXCYXSeioSDCmhQNq6E4R+aBWJvcKAq5tNyf45x6tvWJVY2hk1HVnnJeu7qyVNk
9fA7pGpqsUJg9w9nHW6YLU0AMSSl2a3k/E3lDwhDjYXwZiwQ2Y8atQ702HjiV5US
cZ8/ZblIYqv/WKmhHpBf6dGlGzOUiwnXNIVQDIhXbde7yQPt3gGisftiu6bGyYvA
FuBxm3o0UREX6yHAtII4TQfmcM45BrQa7/7FO3c0ZkpRmGCwiJJjRewUi8Rd2epJ
mP9bNGkGdPriGMdlqcVDMyWvB5XJCaZTlbHHHSyEAaCRTEqeUMKWxp8OMg==
=bmmu
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel PMC / PMT / TPMI / uncore-freq / vsec improvements and new
platform support
- AMD PMC / PMF improvements and new platform support
- AMD ACPI based Wifi band RFI mitigation feature (WBRF)
- WMI bus driver cleanups and improvements (Armin Wolf)
- acer-wmi Predator PHN16-71 support
- New Silicom network appliance EC LEDs / GPIOs driver
* tag 'platform-drivers-x86-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (96 commits)
platform/x86/amd/pmc: Modify SMU message port for latest AMD platform
platform/x86/amd/pmc: Add 1Ah family series to STB support list
platform/x86/amd/pmc: Add idlemask support for 1Ah family
platform/x86/amd/pmc: call amd_pmc_get_ip_info() during driver probe
platform/x86/amd/pmc: Add VPE information for AMDI000A platform
platform/x86/amd/pmc: Send OS_HINT command for AMDI000A platform
platform/x86/amd/pmf: Return a status code only as a constant in two functions
platform/x86/amd/pmf: Return directly after a failed apmf_if_call() in apmf_sbios_heartbeat_notify()
platform/x86: wmi: linux/wmi.h: fix Excess kernel-doc description warning
platform/x86/intel/pmc: Add missing extern
platform/x86/intel/pmc/lnl: Add GBE LTR ignore during suspend
platform/x86/intel/pmc/arl: Add GBE LTR ignore during suspend
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS
platform/x86: hp-bioscfg: Removed needless asm-generic
platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver
platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver
platform/x86/intel/pmc: Add ssram_init flag in PMC discovery in Meteor Lake
platform/x86/intel/pmc: Move common code to core.c
platform/x86/intel/pmc: Add PSON residency counter for Alder Lake
...
Merge ACPI utility functions updates for 6.8-rc1:
- Modify acpi_dev_uid_match() to support different types of its second
argument and adjust its users accordingly (Raag Jadav).
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki).
* acpi-utils:
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
perf: arm_cspmu: drop redundant acpi_dev_uid_to_integer()
efi: dev-path-parser: use acpi_dev_uid_match() for matching _UID
ACPI: LPSS: use acpi_dev_uid_match() for matching _UID
ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types
ACPI: bus: update acpi_dev_uid_match() to support multiple types
Merge ACPI device enumeration updates and ACPI processor driver updates
for 6.8-rc1:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki).
- Adjust the cpufreq thermal reduction algorithm in the ACPI processor
driver for Tegra241 (Srikar Srimath Tirumala, Arnd Bergmann).
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki).
* acpi-scan:
ACPI: scan: Fix an error message in DisCo for Imaging support
ACPI: property: Replicate DT-aligned u32 properties from DisCo for Imaging
ACPI: property: Dig "rotation" property for devices with CSI2 _CRS
ACPI: scan: Extract MIPI DisCo for Imaging data into swnodes
device property: Add SOFTWARE_NODE() macro for defining software nodes
ACPI: scan: Extract _CRS CSI-2 connection information into swnodes
ACPI: scan: Extract CSI-2 connection graph from _CRS
ACPI: property: Support using strings in reference properties
* acpi-processor:
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: processor: reduce CPUFREQ thermal reduction pctg for Tegra241
ACPI: processor: Provide empty stub of acpi_proc_quirk_mwait_check()
A bus_dma_region necessarily stores both CPU and DMA base addresses for
a range, so there's no need to also store the difference between them.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There are only 4 users of acpi_evaluate_reference() and none of them
actually cares about the reason why it fails. All of them are only
interested in whether or not it is successful, so it can return a bool
value indicating that.
Modify acpi_evaluate_reference() as per the observation above and update
its callers accordingly so as to get rid of useless code and local
variables.
The observable behavior of the kernel is not expected to change after
this modification of the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Nothing needs this pointer. Return a normal error code with the usual
IOMMU semantic that ENODEV means 'there is no IOMMU driver'.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is not being used to pass ops, it is just a way to tell if an
iommu driver was probed. These days this can be detected directly via
device_iommu_mapped(). Call device_iommu_mapped() in the two places that
need to check it and remove the iommu parameter everywhere.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It turns out there are more subtle races beyond just the main part of
__iommu_probe_device() itself running in parallel - the dev_iommu_free()
on the way out of an unsuccessful probe can still manage to trip up
concurrent accesses to a device's fwspec. Thus, extend the scope of
iommu_probe_device_lock() to also serialise fwspec creation and initial
retrieval.
Reported-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/
Fixes: 01657bc14a ("iommu: Avoid races around device probe")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Tested-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add information extracted from the MIPI DisCo for Imaging device
properties to software nodes created during the CSI-2 connection graph
discovery.
Link: https://www.mipi.org/specifications/mipi-disco-imaging
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Find ACPI CSI-2 resource descriptors defined since ACPI 6.4 (for
CSI-2 and camera configuration) in _CRS for all device objects in
the given scope of the ACPI namespace that have them, identify the
corresponding "remote endpoint" device objects for them and
allocate memory for software nodes needed to create a DT-like data
structure representing the CSI-2 connection graph for drivers.
The code needed to populate these software nodes will be added by
subsequent change sets.
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#camera-serial-interface-csi-2-connection-resource-descriptor
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The I2C-core already has filtering to skip i2c_client instantiation for
LNXVIDEO acpi_device-s with I2cSerialBus resources, since LNXVIDEO devices
are not i2c_client-s and are handled by the acpi_video driver.
This filtering was added to i2c-core-acpi.c in commit 3a4991a986 ("i2c:
acpi: Do not create i2c-clients for LNXVIDEO ACPI devices").
Now a similar problem has shown up where the SPI-core is instantiating
an unwanted SPI-device for a SpiSerialBus resource under a LNXVIDEO
acpi_device. On a Lenovo Yoga Tab 3 YT3-X90F this unwanted SPI-device
instanstantiation causes the SPI-device instanstantiation for the WM5102
audio codec to fail with:
[ 21.988441] pxa2xx-spi 8086228E:00: chipselect 0 already in use
Instead of duplicating the I2C-core filtering in the SPI-core code, push
the filtering of SerialBus resources under LNXVIDEO acpi_device-s up into
the ACPI-core by adding the LNXVIDEO HID to ignore_serial_bus_ids[].
Note the filtering in the I2C-core i2c_acpi_do_lookup() function is still
necessary because this not only impacts i2c_client instantiation but it
also makes the I2C-core ignore the I2cSerialBus resource when checking what
the maximum speed is the I2C bus supports, which is still necessary.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231104205828.63139-1-hdegoede@redhat.com
Merge ACPI utilities updates, ACPI resource management updates, ACPI
device properties management updates and ACPI LPSS (Intel SoC) driver
update for 6.7-rc1:
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki).
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh).
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede).
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach).
- Allow _DSD buffer data only for byte accessors and document the _DSD
data buffer GUID (Andy Shevchenko).
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav).
* acpi-utils:
ACPI: utils: Remove redundant braces around individual statement
ACPI: utils: Fix up white space in a few places
ACPI: utils: Dynamically determine acpi_handle_list size
ACPI: thermal: Merge trip initialization functions
ACPI: thermal: Collapse trip devices update function wrappers
ACPI: thermal: Collapse trip devices update functions
ACPI: thermal: Add device list to struct acpi_thermal_trip
ACPI: thermal: Fix a small leak in acpi_thermal_add()
ACPI: thermal: Drop valid flag from struct acpi_thermal_trip
ACPI: thermal: Drop redundant trip point flags
ACPI: thermal: Untangle initialization and updates of active trips
ACPI: thermal: Untangle initialization and updates of the passive trip
ACPI: thermal: Simplify critical and hot trips representation
ACPI: thermal: Create and populate trip points table earlier
ACPI: thermal: Determine the number of trip points earlier
ACPI: thermal: Fold acpi_thermal_get_info() into its caller
ACPI: thermal: Simplify initialization of critical and hot trips
* acpi-resource:
ACPI: resource: Do IRQ override on TongFang GMxXGxx
ACPI: resource: Drop .ident values from dmi_system_id tables
ACPI: resource: Consolidate IRQ trigger-type override DMI tables
* acpi-property:
ACPI: property: Document the _DSD data buffer GUID
ACPI: property: Allow _DSD buffer data only for byte accessors
* acpi-soc:
ACPI: LPSS: drop BayTrail and Lynxpoint pinctrl HIDs
acpi_scan_device_not_present() is called when a device in the
hierarchy is not available for enumeration. Historically enumeration
was only based on whether the device was present.
To add support for only enumerating devices that are both present
and enabled, this helper should be renamed. It was only ever about
enumeration, rename it acpi_scan_device_not_enumerated().
No change in behaviour is intended.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_device_is_present() checks the present or functional bits
from the cached copy of _STA.
A few places open-code this check. Use the helper instead to
improve readability.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Address a long-standing "TBD" comment in the ACPI headers regarding the
number of handles in struct acpi_handle_list.
The number 10, which along with the comment dates back to 2.4.23, seems
like it may have been arbitrarily chosen and isn't sufficient in all
cases [1].
Finally change the code to dynamically determine the size of the handles
table in struct acpi_handle_list and allocate it accordingly.
Update the users of to struct acpi_handle_list to take the additional
dynamic allocation into account.
Link: https://lore.kernel.org/linux-acpi/20230809094451.15473-1-ivan.hu@canonical.com # [1]
Co-developed-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
