Fixes the following sparse warnings:
crypto/asymmetric_keys/pkcs7_key_type.c:73:17: warning:
symbol 'key_type_pkcs7' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
crypto/asymmetric_keys/pkcs7_key_type.c needs to #include linux/err.h rather
than relying on getting it through other headers.
Without this, the powerpc allyesconfig build fails.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=e1NL
-----END PGP SIGNATURE-----
Merge tag 'keys-pefile-20140709' into keys-next
Here's a set of changes that implement a PE file signature checker.
This provides the following facility:
(1) Extract the signature from the PE file. This is a PKCS#7 message
containing, as its data, a hash of the signed parts of the file.
(2) Digest the signed parts of the file.
(3) Compare the digest with the one from the PKCS#7 message.
(4) Validate the signatures on the PKCS#7 message and indicate
whether it was matched by a trusted key.
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aRKT
-----END PGP SIGNATURE-----
Merge tag 'keys-pkcs7-20140708' into keys-next
Here's a set of changes that implement a PKCS#7 message parser in the kernel.
The PKCS#7 message parsing will then be used to limit kexec to authenticated
kernels only if so configured.
The changes provide the following facilities:
(1) Parse an ASN.1 PKCS#7 message and pick out useful bits such as the data
content and the X.509 certificates used to sign it and all the data
signatures.
(2) Verify all the data signatures against the set of X.509 certificates
available in the message.
(3) Follow the certificate chains and verify that:
(a) for every self-signed X.509 certificate, check that it validly signed
itself, and:
(b) for every non-self-signed certificate, if we have a 'parent'
certificate, the former is validly signed by the latter.
(4) Look for intersections between the certificate chains and the trusted
keyring, if any intersections are found, verify that the trusted
certificates signed the intersection point in the chain.
(5) For testing purposes, a key type can be made available that will take a
PKCS#7 message, check that the message is trustworthy, and if so, add its
data content into the key.
Note that (5) has to be altered to take account of the preparsing patches
already committed to this branch.
Signed-off-by: David Howells <dhowells@redhat.com>
struct key_preparsed_payload should have two payload pointers to correspond
with those in struct key.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Provide a generic instantiation function for key types that use the preparse
hook. This makes it easier to prereserve key quota before keyrings get locked
to retain the new key.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Sage Weil <sage@redhat.com>
You can select MPILIB_EXTRA all you want, it doesn't exist ;-)
Surprised kconfig doesn't complain about that...
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Instead of allowing public keys, with certificates signed by any
key on the system trusted keyring, to be added to a trusted keyring,
this patch further restricts the certificates to those signed only by
builtin keys on the system keyring.
This patch defines a new option 'builtin' for the kernel parameter
'keys_ownerid' to allow trust validation using builtin keys.
Simplified Mimi's "KEYS: define an owner trusted keyring" patch
Changelog v7:
- rename builtin_keys to use_builtin_keys
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Instead of allowing public keys, with certificates signed by any
key on the system trusted keyring, to be added to a trusted keyring,
this patch further restricts the certificates to those signed by a
particular key on the system keyring.
This patch defines a new kernel parameter 'ca_keys' to identify the
specific key which must be used for trust validation of certificates.
Simplified Mimi's "KEYS: define an owner trusted keyring" patch.
Changelog:
- support for builtin x509 public keys only
- export "asymmetric_keyid_match"
- remove ifndefs MODULE
- rename kernel boot parameter from keys_ownerid to ca_keys
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
To avoid code duplication this patch refactors asymmetric_key_match(),
making partial ID string match a separate function.
This patch also implicitly fixes a bug in the code. asymmetric_key_match()
allows to match the key by its subtype. But subtype matching could be
undone if asymmetric_key_id(key) would return NULL. This patch first
checks for matching spec and then for its value.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Only public keys, with certificates signed by an existing
'trusted' key on the system trusted keyring, should be added
to a trusted keyring. This patch adds support for verifying
a certificate's signature.
This is derived from David Howells pkcs7_request_asymmetric_key() patch.
Changelog v6:
- on error free key - Dmitry
- validate trust only for not already trusted keys - Dmitry
- formatting cleanup
Changelog:
- define get_system_trusted_keyring() to fix kbuild issues
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Validate the PKCS#7 trust chain against the contents of the system keyring.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Digest the signed parts of the PE binary, canonicalising the section table
before we need it, and then compare the the resulting digest to the one in the
PKCS#7 signed content.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
The pesign utility had a bug where it was using OID_msIndividualSPKeyPurpose
instead of OID_msPeImageDataObjId - so allow both OIDs.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
The PKCS#7 certificate should contain a "Microsoft individual code signing"
data blob as its signed content. This blob contains a digest of the signed
content of the PE binary and the OID of the digest algorithm used (typically
SHA256).
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Parse the content of the certificate blob, presuming it to be PKCS#7 format.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
The certificate data block in a PE binary has a wrapper around the PKCS#7
signature we actually want to get at. Strip this off and check that we've got
something that appears to be a PKCS#7 signature.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Parse a PE binary to find a key and a signature contained therein. Later
patches will check the signature and add the key if the signature checks out.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Find the intersection between the X.509 certificate chain contained in a PKCS#7
message and a set of keys that we already know and trust.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Verify certificate chain in the X.509 certificates contained within the PKCS#7
message as far as possible. If any signature that we should be able to verify
fails, we reject the whole lot.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Find the appropriate key in the PKCS#7 key list and verify the signature with
it. There may be several keys in there forming a chain. Any link in that
chain or the root of that chain may be in our keyrings.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Digest the data in a PKCS#7 signed-data message and attach to the
public_key_signature struct contained in the pkcs7_message struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Implement a parser for a PKCS#7 signed-data message as described in part of
RFC 2315.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
PKCS#7 validation requires access to the serial number and the raw names in an
X.509 certificate.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
This reverts commit 09fbc47373, which
caused the following build errors:
crypto/asymmetric_keys/x509_public_key.c: In function ‘x509_key_preparse’:
crypto/asymmetric_keys/x509_public_key.c:237:35: error: ‘system_trusted_keyring’ undeclared (first use in this function)
ret = x509_validate_trust(cert, system_trusted_keyring);
^
crypto/asymmetric_keys/x509_public_key.c:237:35: note: each undeclared identifier is reported only once for each function it appears in
reported by Jim Davis. Mimi says:
"I made the classic mistake of requesting this patch to be upstreamed
at the last second, rather than waiting until the next open window.
At this point, the best course would probably be to revert the two
commits and fix them for the next open window"
Reported-by: Jim Davis <jim.epost@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto update from Herbert Xu:
- Made x86 ablk_helper generic for ARM
- Phase out chainiv in favour of eseqiv (affects IPsec)
- Fixed aes-cbc IV corruption on s390
- Added constant-time crypto_memneq which replaces memcmp
- Fixed aes-ctr in omap-aes
- Added OMAP3 ROM RNG support
- Add PRNG support for MSM SoC's
- Add and use Job Ring API in caam
- Misc fixes
[ NOTE! This pull request was sent within the merge window, but Herbert
has some questionable email sending setup that makes him public enemy
#1 as far as gmail is concerned. So most of his emails seem to be
trapped by gmail as spam, resulting in me not seeing them. - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (49 commits)
crypto: s390 - Fix aes-cbc IV corruption
crypto: omap-aes - Fix CTR mode counter length
crypto: omap-sham - Add missing modalias
padata: make the sequence counter an atomic_t
crypto: caam - Modify the interface layers to use JR API's
crypto: caam - Add API's to allocate/free Job Rings
crypto: caam - Add Platform driver for Job Ring
hwrng: msm - Add PRNG support for MSM SoC's
ARM: DT: msm: Add Qualcomm's PRNG driver binding document
crypto: skcipher - Use eseqiv even on UP machines
crypto: talitos - Simplify key parsing
crypto: picoxcell - Simplify and harden key parsing
crypto: ixp4xx - Simplify and harden key parsing
crypto: authencesn - Simplify key parsing
crypto: authenc - Export key parsing helper function
crypto: mv_cesa: remove deprecated IRQF_DISABLED
hwrng: OMAP3 ROM Random Number Generator support
crypto: sha256_ssse3 - also test for BMI2
crypto: mv_cesa - Remove redundant of_match_ptr
crypto: sahara - Remove redundant of_match_ptr
...
The RSA public key algorithm needs to select MPILIB directly in Kconfig as the
'select' directive is not recursive and is thus MPILIB is not enabled by
selecting MPILIB_EXTRA.
Without this, the following errors can occur:
crypto/built-in.o: In function `RSA_verify_signature':
rsa.c:(.text+0x1d347): undefined reference to `mpi_get_nbits'
rsa.c:(.text+0x1d354): undefined reference to `mpi_get_nbits'
rsa.c:(.text+0x1d36e): undefined reference to `mpi_cmp_ui'
rsa.c:(.text+0x1d382): undefined reference to `mpi_cmp'
rsa.c:(.text+0x1d391): undefined reference to `mpi_alloc'
rsa.c:(.text+0x1d3b0): undefined reference to `mpi_powm'
rsa.c:(.text+0x1d3c3): undefined reference to `mpi_free'
rsa.c:(.text+0x1d3d8): undefined reference to `mpi_get_buffer'
rsa.c:(.text+0x1d4d4): undefined reference to `mpi_free'
rsa.c:(.text+0x1d503): undefined reference to `mpi_get_nbits'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
In preparation of supporting more hash algorithms with larger hash sizes
needed for signature verification, this patch replaces the 20 byte sized
digest, with a more flexible structure. The new structure includes the
hash algorithm, digest size, and digest.
Changelog:
- recalculate filedata hash for the measurement list, if the signature
hash digest size is greater than 20 bytes.
- use generic HASH_ALGO_
- make ima_calc_file_hash static
- scripts lindent and checkpatch fixes
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch makes use of the newly defined common hash algorithm info,
replacing, for example, PKEY_HASH with HASH_ALGO.
Changelog:
- Lindent fixes - Mimi
CC: David Howells <dhowells@redhat.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
When comparing MAC hashes, AEAD authentication tags, or other hash
values in the context of authentication or integrity checking, it
is important not to leak timing information to a potential attacker,
i.e. when communication happens over a network.
Bytewise memory comparisons (such as memcmp) are usually optimized so
that they return a nonzero value as soon as a mismatch is found. E.g,
on x86_64/i5 for 512 bytes this can be ~50 cyc for a full mismatch
and up to ~850 cyc for a full match (cold). This early-return behavior
can leak timing information as a side channel, allowing an attacker to
iteratively guess the correct result.
This patch adds a new method crypto_memneq ("memory not equal to each
other") to the crypto API that compares memory areas of the same length
in roughly "constant time" (cache misses could change the timing, but
since they don't reveal information about the content of the strings
being compared, they are effectively benign). Iow, best and worst case
behaviour take the same amount of time to complete (in contrast to
memcmp).
Note that crypto_memneq (unlike memcmp) can only be used to test for
equality or inequality, NOT for lexicographical order. This, however,
is not an issue for its use-cases within the crypto API.
We tried to locate all of the places in the crypto API where memcmp was
being used for authentication or integrity checking, and convert them
over to crypto_memneq.
crypto_memneq is declared noinline, placed in its own source file,
and compiled with optimizations that might increase code size disabled
("Os") because a smart compiler (or LTO) might notice that the return
value is always compared against zero/nonzero, and might then
reintroduce the same early-return optimization that we are trying to
avoid.
Using #pragma or __attribute__ optimization annotations of the code
for disabling optimization was avoided as it seems to be considered
broken or unmaintained for long time in GCC [1]. Therefore, we work
around that by specifying the compile flag for memneq.o directly in
the Makefile. We found that this seems to be most appropriate.
As we use ("Os"), this patch also provides a loop-free "fast-path" for
frequently used 16 byte digests. Similarly to kernel library string
functions, leave an option for future even further optimized architecture
specific assembler implementations.
This was a joint work of James Yonan and Daniel Borkmann. Also thanks
for feedback from Florian Weimer on this and earlier proposals [2].
[1] http://gcc.gnu.org/ml/gcc/2012-07/msg00211.html
[2] https://lkml.org/lkml/2013/2/10/131
Signed-off-by: James Yonan <james@openvpn.net>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes lack of license, otherwise x509_key_parser.ko taints kernel.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Only public keys, with certificates signed by an existing
'trusted' key on the system trusted keyring, should be added
to a trusted keyring. This patch adds support for verifying
a certificate's signature.
This is derived from David Howells pkcs7_request_asymmetric_key() patch.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The keyring expansion patches introduces a new search method by which
key_search() attempts to walk directly to the key that has exactly the same
description as the requested one.
However, this causes inexact matching of asymmetric keys to fail. The
solution to this is to select iterative rather than direct search as the
default search type for asymmetric keys.
As an example, the kernel might have a key like this:
Magrathea: Glacier signing key: 6a2a0f82bad7e396665f465e4e3e1f9bd24b1226
and:
keyctl search <keyring-ID> asymmetric id:d24b1226
should find the key, despite that not being its exact description.
Signed-off-by: David Howells <dhowells@redhat.com>
Remove the certificate date checks that are performed when a certificate is
parsed. There are two checks: a valid from and a valid to. The first check is
causing a lot of problems with system clocks that don't keep good time and the
second places an implicit expiry date upon the kernel when used for module
signing, so do we really need them?
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Woodhouse <dwmw2@infradead.org>
cc: Rusty Russell <rusty@rustcorp.com.au>
cc: Josh Boyer <jwboyer@redhat.com>
cc: Alexander Holler <holler@ahsoftware.de>
cc: stable@vger.kernel.org
Handle certificates that lack an authorityKeyIdentifier field by assuming
they're self-signed and checking their signatures against themselves.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
Check that the algorithm IDs obtained from the ASN.1 parse by OID lookup
corresponds to algorithms that are available to us.
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Embed a public_key_signature struct in struct x509_certificate, eliminating
now unnecessary fields, and split x509_check_signature() to create a filler
function for it that attaches a digest of the signed data and an MPI that
represents the signature data. x509_free_certificate() is then modified to
deal with these.
Whilst we're at it, export both x509_check_signature() and the new
x509_get_sig_params().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
Modify public_key_verify_signature() so that it now takes a public_key struct
rather than a key struct and supply a wrapper that takes a key struct. The
wrapper is then used by the asymmetric key subtype and the modified function is
used by X.509 self-signature checking and can be used by other things also.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
Store public key algo ID in public_key struct for reference purposes. This
allows it to be removed from the x509_certificate struct and used to find a
default in public_key_verify_signature().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
Move the public-key algorithm pointer array from x509_public_key.c to
public_key.c as it isn't X.509 specific.
Note that to make this configure correctly, the public key part must be
dependent on the RSA module rather than the other way round. This needs a
further patch to make use of the crypto module loading stuff rather than using
a fixed table.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
Rename the arrays of public key parameters (public key algorithm names, hash
algorithm names and ID type names) so that the array name ends in "_name".
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
Per X.509 spec in 4.2.1.1 section, the structure of Authority Key
Identifier Extension is:
AuthorityKeyIdentifier ::= SEQUENCE {
keyIdentifier [0] KeyIdentifier OPTIONAL,
authorityCertIssuer [1] GeneralNames OPTIONAL,
authorityCertSerialNumber [2] CertificateSerialNumber OPTIONAL }
KeyIdentifier ::= OCTET STRING
When a certificate also provides
authorityCertIssuer and authorityCertSerialNumber then the length of
AuthorityKeyIdentifier SEQUENCE is likely to long form format.
e.g.
The example certificate demos/tunala/A-server.pem in openssl source:
X509v3 Authority Key Identifier:
keyid:49:FB:45:72:12:C4:CC:E1:45:A1:D3:08:9E:95:C4:2C:6D:55:3F:17
DirName:/C=NZ/L=Wellington/O=Really Irresponsible Authorisation Authority (RIAA)/OU=Cert-stamping/CN=Jackov al-Trades/emailAddress=none@fake.domain
serial:00
Current parsing rule of OID_authorityKeyIdentifier only take care the
short form format, it causes load certificate to modsign_keyring fail:
[ 12.061147] X.509: Extension: 47
[ 12.075121] MODSIGN: Problem loading in-kernel X.509 certificate (-74)
So, this patch add the parsing rule for support long form format against
Authority Key Identifier.
v3:
Changed the size check in "Short Form length" case, we allow v[3] smaller
then (vlen - 4) because authorityCertIssuer and authorityCertSerialNumber
are also possible attach in AuthorityKeyIdentifier sequence.
v2:
- Removed comma from author's name.
- Moved 'Short Form length' comment inside the if-body.
- Changed the type of sub to size_t.
- Use ASN1_INDEFINITE_LENGTH rather than writing 0x80 and 127.
- Moved the key_len's value assignment before alter v.
- Fixed the typo of octets.
- Add 2 to v before entering the loop for calculate the length.
- Removed the comment of check vlen.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some debugging printk() calls should've been converted to pr_devel() calls.
Do that now.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fix printk format warning in x509_cert_parser.c:
crypto/asymmetric_keys/x509_cert_parser.c: In function 'x509_note_OID':
crypto/asymmetric_keys/x509_cert_parser.c:113:3: warning: format '%zu' expects type 'size_t', but argument 2 has type 'long unsigned int'
Builds cleanly on i386 and x86_64.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The current choice of lifetime for the autogenerated X.509 of 100 years,
putting the validTo date in 2112, causes problems on 32-bit systems where a
32-bit time_t wraps in 2106. 64-bit x86_64 systems seem to be unaffected.
This can result in something like:
Loading module verification certificates
X.509: Cert 6e03943da0f3b015ba6ed7f5e0cac4fe48680994 has expired
MODSIGN: Problem loading in-kernel X.509 certificate (-127)
Or:
X.509: Cert 6e03943da0f3b015ba6ed7f5e0cac4fe48680994 is not yet valid
MODSIGN: Problem loading in-kernel X.509 certificate (-129)
Instead of turning the dates into time_t values and comparing, turn the system
clock and the ASN.1 dates into tm structs and compare those piecemeal instead.
Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add a crypto key parser for binary (DER) encoded X.509 certificates. The
certificate is parsed and, if possible, the signature is verified.
An X.509 key can be added like this:
# keyctl padd crypto bar @s </tmp/x509.cert
15768135
and displayed like this:
# cat /proc/keys
00f09a47 I--Q--- 1 perm 39390000 0 0 asymmetri bar: X509.RSA e9fd6d08 []
Note that this only works with binary certificates. PEM encoded certificates
are ignored by the parser.
Note also that the X.509 key ID is not congruent with the PGP key ID, but for
the moment, they will match.
If a NULL or "" name is given to add_key(), then the parser will generate a key
description from the CertificateSerialNumber and Name fields of the
TBSCertificate:
00aefc4e I--Q--- 1 perm 39390000 0 0 asymmetri bfbc0cd76d050ea4:/C=GB/L=Cambridge/O=Red Hat/CN=kernel key: X509.RSA 0c688c7b []
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gpg can produce a signature file where length of signature is less than the
modulus size because the amount of space an MPI takes up is kept as low as
possible by discarding leading zeros. This regularly happens for several
modules during the build.
Fix it by relaxing check in RSA verification code.
Thanks to Tomas Mraz and Miloslav Trmac for help.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Implement RSA public key cryptography [PKCS#1 / RFC3447]. At this time, only
the signature verification algorithm is supported. This uses the asymmetric
public key subtype to hold its key data.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Provide signature verification using an asymmetric-type key to indicate the
public key to be used.
The API is a single function that can be found in crypto/public_key.h:
int verify_signature(const struct key *key,
const struct public_key_signature *sig)
The first argument is the appropriate key to be used and the second argument
is the parsed signature data:
struct public_key_signature {
u8 *digest;
u16 digest_size;
enum pkey_hash_algo pkey_hash_algo : 8;
union {
MPI mpi[2];
struct {
MPI s; /* m^d mod n */
} rsa;
struct {
MPI r;
MPI s;
} dsa;
};
};
This should be filled in prior to calling the function. The hash algorithm
should already have been called and the hash finalised and the output should
be in a buffer pointed to by the 'digest' member.
Any extra data to be added to the hash by the hash format (eg. PGP) should
have been added by the caller prior to finalising the hash.
It is assumed that the signature is made up of a number of MPI values. If an
algorithm becomes available for which this is not the case, the above structure
will have to change.
It is also assumed that it will have been checked that the signature algorithm
matches the key algorithm.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add a subtype for supporting asymmetric public-key encryption algorithms such
as DSA (FIPS-186) and RSA (PKCS#1 / RFC1337).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The instantiation data passed to the asymmetric key type are expected to be
formatted in some way, and there are several possible standard ways to format
the data.
The two obvious standards are OpenPGP keys and X.509 certificates. The latter
is especially useful when dealing with UEFI, and the former might be useful
when dealing with, say, eCryptfs.
Further, it might be desirable to provide formatted blobs that indicate
hardware is to be accessed to retrieve the keys or that the keys live
unretrievably in a hardware store, but that the keys can be used by means of
the hardware.
From userspace, the keys can be loaded using the keyctl command, for example,
an X.509 binary certificate:
keyctl padd asymmetric foo @s <dhowells.pem
or a PGP key:
keyctl padd asymmetric bar @s <dhowells.pub
or a pointer into the contents of the TPM:
keyctl add asymmetric zebra "TPM:04982390582905f8" @s
Inside the kernel, pluggable parsers register themselves and then get to
examine the payload data to see if they can handle it. If they can, they get
to:
(1) Propose a name for the key, to be used it the name is "" or NULL.
(2) Specify the key subtype.
(3) Provide the data for the subtype.
The key type asks the parser to do its stuff before a key is allocated and thus
before the name is set. If successful, the parser stores the suggested data
into the key_preparsed_payload struct, which will be either used (if the key is
successfully created and instantiated or updated) or discarded.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Create a key type that can be used to represent an asymmetric key type for use
in appropriate cryptographic operations, such as encryption, decryption,
signature generation and signature verification.
The key type is "asymmetric" and can provide access to a variety of
cryptographic algorithms.
Possibly, this would be better as "public_key" - but that has the disadvantage
that "public key" is an overloaded term.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
