Commit Graph

196 Commits

Author SHA1 Message Date
Huacai Chen
614d7e9975 LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support
Add ARCH_HAS_DEBUG_VM_PGTABLE selection in Kconfig, in order to make
corresponding vm debug features usable on LoongArch. Also update the
corresponding arch-support.txt document.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-07-20 22:40:59 +08:00
Andrea Parri
cd9b29014d
membarrier: riscv: Provide core serializing command
RISC-V uses xRET instructions on return from interrupt and to go back
to user-space; the xRET instruction is not core serializing.

Use FENCE.I for providing core serialization as follows:

 - by calling sync_core_before_usermode() on return from interrupt (cf.
   ipi_sync_core()),

 - via switch_mm() and sync_core_before_usermode() (respectively, for
   uthread->uthread and kthread->uthread transitions) before returning
   to user-space.

On RISC-V, the serialization in switch_mm() is activated by resetting
the icache_stale_mask of the mm at prepare_sync_core_cmd().

Suggested-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-5-parri.andrea@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-02-15 08:04:14 -08:00
Alexandre Ghiti
54d7431af7
riscv: Add support for BATCHED_UNMAP_TLB_FLUSH
Allow to defer the flushing of the TLB when unmapping pages, which allows
to reduce the numbers of IPI and the number of sfence.vma.

The ubenchmarch used in commit 43b3dfdd04 ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration") that
was multithreaded to force the usage of IPI shows good performance
improvement on all platforms:

* Unmatched: ~34%
* TH1520   : ~78%
* Qemu     : ~81%

In addition, perf on qemu reports an important decrease in time spent
dealing with IPIs:

Before:  68.17%  main     [kernel.kallsyms]            [k] __sbi_rfence_v02_call
After :   8.64%  main     [kernel.kallsyms]            [k] __sbi_rfence_v02_call

* Benchmark:

int stick_this_thread_to_core(int core_id) {
        int num_cores = sysconf(_SC_NPROCESSORS_ONLN);
        if (core_id < 0 || core_id >= num_cores)
           return EINVAL;

        cpu_set_t cpuset;
        CPU_ZERO(&cpuset);
        CPU_SET(core_id, &cpuset);

        pthread_t current_thread = pthread_self();
        return pthread_setaffinity_np(current_thread,
sizeof(cpu_set_t), &cpuset);
}

static void *fn_thread (void *p_data)
{
        int ret;
        pthread_t thread;

        stick_this_thread_to_core((int)p_data);

        while (1) {
                sleep(1);
        }

        return NULL;
}

int main()
{
        volatile unsigned char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
                                         MAP_SHARED | MAP_ANONYMOUS, -1, 0);
        pthread_t threads[4];
        int ret;

        for (int i = 0; i < 4; ++i) {
                ret = pthread_create(&threads[i], NULL, fn_thread, (void *)i);
                if (ret)
                {
                        printf("%s", strerror (ret));
                }
        }

        memset(p, 0x88, SIZE);

        for (int k = 0; k < 10000; k++) {
                /* swap in */
                for (int i = 0; i < SIZE; i += 4096) {
                        (void)p[i];
                }

                /* swap out */
                madvise(p, SIZE, MADV_PAGEOUT);
        }

        for (int i = 0; i < 4; i++)
        {
                pthread_cancel(threads[i]);
        }

        for (int i = 0; i < 4; i++)
        {
                pthread_join(threads[i], NULL);
        }

        return 0;
}

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Jisheng Zhang <jszhang@kernel.org> # Tested on TH1520
Tested-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20240108193640.344929-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-11 08:01:53 -08:00
Ard Biesheuvel
af1f459233 Documentation: Drop IA64 from feature descriptions
Itanium (IA64) is going away, so drop it from the kernel feature
documentation.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-09-11 08:13:18 +00:00
Linus Torvalds
12952b6bbd LoongArch changes for v6.6
1, Allow usage of LSX/LASX in the kernel;
 2, Add SIMD-optimized RAID5/RAID6 routines;
 3, Add Loongson Binary Translation (LBT) extension support;
 4, Add basic KGDB & KDB support;
 5, Add building with kcov coverage;
 6, Add KFENCE (Kernel Electric-Fence) support;
 7, Add KASAN (Kernel Address Sanitizer) support;
 8, Some bug fixes and other small changes;
 9, Update the default config file.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmT5TfMWHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImeqd3EACjqCaHNlp33kwufSPpGuQw9a8I
 F7JW1KzBOoWELch5nFRjfQClROBWRmM4jN5YnxENBQ5K2F1K6gfxdkfjew+KV2mn
 ki9ByamCfFVJDZXo9wavUD2LBrVakEFmLT+SyXBxdWwJ3fDivHjF6A0qs9ltp7dq
 Bttq4bkw1mZsU6MnViRwPKVROtNUVrd9mwYSTq0iXviVEbWhPHQQTxRizNra9Z6X
 7XWxO0ODHl0WVvdOJU+F16mBRS3Bs1g/HHAIDc41yrYEHFFOeFCEUAQSF/4Nj5wj
 BAfAB8WOa9+vPH8fTnrpCt2RtGJmkz71TM49DdXB7jpGaWIyc4WDi9MXeeBiJ0wE
 vQg8IECc9POC1sH4/6BMwq2qkrWRj2PYFYof0fP66iWNjmodtNUf7GOVHy8MTQan
 xHWizJFAdY/u/bwbF9tRQ+EVeot/844CkjtZxkgTfV8shN6kCMEVAamwBItZ7TXN
 g/oc1ORM6nsKHBDQF3r2LSY0Gbf3OSfMJVL8SLEQ9hAhgGhotmJ36B4bdvyO7T0Q
 gNn//U+p4IIMFRKRxreEz9P0KjTOJrHAAxNzu1oZebhGZd5WI+i0PHYkkBDKZTXc
 7qaEdM2cX8Wd0ePIXOHQnSItwYO7ilrviHyeCM8wd/g2/W/00jvnpF3J+2rk7eJO
 rcfAr8+V5ylYBQzp6Q==
 =NXy2
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Allow usage of LSX/LASX in the kernel, and use them for
   SIMD-optimized RAID5/RAID6 routines

 - Add Loongson Binary Translation (LBT) extension support

 - Add basic KGDB & KDB support

 - Add building with kcov coverage

 - Add KFENCE (Kernel Electric-Fence) support

 - Add KASAN (Kernel Address Sanitizer) support

 - Some bug fixes and other small changes

 - Update the default config file

* tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
  LoongArch: Update Loongson-3 default config file
  LoongArch: Add KASAN (Kernel Address Sanitizer) support
  LoongArch: Simplify the processing of jumping new kernel for KASLR
  kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
  kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
  LoongArch: Add KFENCE (Kernel Electric-Fence) support
  LoongArch: Get partial stack information when providing regs parameter
  LoongArch: mm: Add page table mapped mode support for virt_to_page()
  kfence: Defer the assignment of the local variable addr
  LoongArch: Allow building with kcov coverage
  LoongArch: Provide kaslr_offset() to get kernel offset
  LoongArch: Add basic KGDB & KDB support
  LoongArch: Add Loongson Binary Translation (LBT) extension support
  raid6: Add LoongArch SIMD recovery implementation
  raid6: Add LoongArch SIMD syndrome calculation
  LoongArch: Add SIMD-optimized XOR routines
  LoongArch: Allow usage of LSX/LASX in the kernel
  LoongArch: Define symbol 'fault' as a local label in fpu.S
  LoongArch: Adjust {copy, clear}_user exception handler behavior
  LoongArch: Use static defined zero page rather than allocated
  ...
2023-09-08 12:16:52 -07:00
Qing Zhang
5aa4ac64e6 LoongArch: Add KASAN (Kernel Address Sanitizer) support
1/8 of kernel addresses reserved for shadow memory. But for LoongArch,
There are a lot of holes between different segments and valid address
space (256T available) is insufficient to map all these segments to kasan
shadow memory with the common formula provided by kasan core, saying
(addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET

So LoongArch has a arch-specific mapping formula, different segments are
mapped individually, and only limited space lengths of these specific
segments are mapped to shadow.

At early boot stage the whole shadow region populated with just one
physical page (kasan_early_shadow_page). Later, this page is reused as
readonly zero shadow for some memory that kasan currently don't track.
After mapping the physical memory, pages for shadow memory are allocated
and mapped.

Functions like memset()/memcpy()/memmove() do a lot of memory accesses.
If bad pointer passed to one of these function it is important to be
caught. Compiler's instrumentation cannot do this since these functions
are written in assembly.

KASan replaces memory functions with manually instrumented variants.
Original functions declared as weak symbols so strong definitions in
mm/kasan/kasan.c could replace them. Original functions have aliases
with '__' prefix in names, so we could call non-instrumented variant
if needed.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 22:54:16 +08:00
Feiyang Chen
2363088eba LoongArch: Allow building with kcov coverage
Add ARCH_HAS_KCOV and HAVE_GCC_PLUGINS to the LoongArch Kconfig. And
also disable instrumentation of vdso.

Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 22:53:55 +08:00
Qing Zhang
e14dd07696 LoongArch: Add basic KGDB & KDB support
KGDB is intended to be used as a source level debugger for the Linux
kernel. It is used along with gdb to debug a Linux kernel. GDB can be
used to "break in" to the kernel to inspect memory, variables and regs
similar to the way an application developer would use GDB to debug an
application. KDB is a frontend of KGDB which is similar to GDB.

By now, in addition to the generic KGDB features, the LoongArch KGDB
implements the following features:
- Hardware breakpoints/watchpoints;
- Software single-step support for KDB.

Signed-off-by: Qing Zhang <zhangqing@loongson.cn>   # Framework & CoreFeature
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> # BreakPoint & SingleStep
Signed-off-by: Hui Li <lihui@loongson.cn>           # Some Minor Improvements
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> # Some Build Error Fixes
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-06 22:53:55 +08:00
Linus Torvalds
cd99b9eb4b Documentation work keeps chugging along; stuff for 6.6 includes:
- Work from Carlos Bilbao to integrate rustdoc output into the generated
   HTML documentation.  This took some work to figure out how to do it
   without slowing the docs build and without creating people who don't have
   Rust installed, but Carlos got there.
 
 - Move the loongarch and mips architecture documentation under
   Documentation/arch/.
 
 - Some more maintainer documentation from Jakub
 
 ...plus the usual assortment of updates, translations, and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmTvqNkPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YgIgH/3drfLtlFtzLqDOzrzDXS8yGnE3pPdxw796b
 /ZFzAK16wYKaKevYoIz8bVGGKaE1sEUW0mhlq4KGdfZuxLG8YnWS8URyCW4FDU2E
 6qNL+8oJ8LZfID46f9Q8ZgfEz7yF/mhCqPk7MEswYtwbscs2ZTGCTGYB/5BHlBuT
 LR+M89uLmHgr8S1o24v30OgiX+VvQFyu0xoxIhbiqUZvBd/XdfX2pgYd9BGzMj5q
 C2ZP+V14g36c5pV0EO9TwhCXOF/WVrp7DbjbfWAsqBSLxvpXPydH2q1DUzGeQtP1
 exujrBD1O8q3pPdaNA5R+h6cWlHmUZug9mE4BRLp9ErGrozwJsQ=
 =C3Uv
 -----END PGP SIGNATURE-----

Merge tag 'docs-6.6' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "Documentation work keeps chugging along; this includes:

   - Work from Carlos Bilbao to integrate rustdoc output into the
     generated HTML documentation. This took some work to figure out how
     to do it without slowing the docs build and without creating people
     who don't have Rust installed, but Carlos got there

   - Move the loongarch and mips architecture documentation under
     Documentation/arch/

   - Some more maintainer documentation from Jakub

  ... plus the usual assortment of updates, translations, and fixes"

* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
  Docu: genericirq.rst: fix irq-example
  input: docs: pxrc: remove reference to phoenix-sim
  Documentation: serial-console: Fix literal block marker
  docs/mm: remove references to hmm_mirror ops and clean typos
  docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
  Documentation: Fix typos
  Documentation/ABI: Fix typos
  scripts: kernel-doc: fix macro handling in enums
  scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
  Documentation: riscv: Update boot image header since EFI stub is supported
  Documentation: riscv: Add early boot document
  Documentation: arm: Add bootargs to the table of added DT parameters
  docs: kernel-parameters: Refer to the correct bitmap function
  doc: update params of memhp_default_state=
  docs: Add book to process/kernel-docs.rst
  docs: sparse: fix invalid link addresses
  docs: vfs: clean up after the iterate() removal
  docs: Add a section on surveys to the researcher guidelines
  docs: move mips under arch
  docs: move loongarch under arch
  ...
2023-08-30 20:05:42 -07:00
Bjorn Helgaas
d56b699d76 Documentation: Fix typos
Fix typos in Documentation.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-4-helgaas@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-08-18 11:29:03 -06:00
Barry Song
43b3dfdd04 arm64: support batched/deferred tlb shootdown during page reclamation/migration
On x86, batched and deferred tlb shootdown has lead to 90% performance
increase on tlb shootdown.  on arm64, HW can do tlb shootdown without
software IPI.  But sync tlbi is still quite expensive.

Even running a simplest program which requires swapout can
prove this is true,
 #include <sys/types.h>
 #include <unistd.h>
 #include <sys/mman.h>
 #include <string.h>

 int main()
 {
 #define SIZE (1 * 1024 * 1024)
         volatile unsigned char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
                                          MAP_SHARED | MAP_ANONYMOUS, -1, 0);

         memset(p, 0x88, SIZE);

         for (int k = 0; k < 10000; k++) {
                 /* swap in */
                 for (int i = 0; i < SIZE; i += 4096) {
                         (void)p[i];
                 }

                 /* swap out */
                 madvise(p, SIZE, MADV_PAGEOUT);
         }
 }

Perf result on snapdragon 888 with 8 cores by using zRAM
as the swap block device.

 ~ # perf record taskset -c 4 ./a.out
 [ perf record: Woken up 10 times to write data ]
 [ perf record: Captured and wrote 2.297 MB perf.data (60084 samples) ]
 ~ # perf report
 # To display the perf.data header info, please use --header/--header-only options.
 # To display the perf.data header info, please use --header/--header-only options.
 #
 #
 # Total Lost Samples: 0
 #
 # Samples: 60K of event 'cycles'
 # Event count (approx.): 35706225414
 #
 # Overhead  Command  Shared Object      Symbol
 # ........  .......  .................  ......
 #
    21.07%  a.out    [kernel.kallsyms]  [k] _raw_spin_unlock_irq
     8.23%  a.out    [kernel.kallsyms]  [k] _raw_spin_unlock_irqrestore
     6.67%  a.out    [kernel.kallsyms]  [k] filemap_map_pages
     6.16%  a.out    [kernel.kallsyms]  [k] __zram_bvec_write
     5.36%  a.out    [kernel.kallsyms]  [k] ptep_clear_flush
     3.71%  a.out    [kernel.kallsyms]  [k] _raw_spin_lock
     3.49%  a.out    [kernel.kallsyms]  [k] memset64
     1.63%  a.out    [kernel.kallsyms]  [k] clear_page
     1.42%  a.out    [kernel.kallsyms]  [k] _raw_spin_unlock
     1.26%  a.out    [kernel.kallsyms]  [k] mod_zone_state.llvm.8525150236079521930
     1.23%  a.out    [kernel.kallsyms]  [k] xas_load
     1.15%  a.out    [kernel.kallsyms]  [k] zram_slot_lock

ptep_clear_flush() takes 5.36% CPU in the micro-benchmark swapping in/out
a page mapped by only one process.  If the page is mapped by multiple
processes, typically, like more than 100 on a phone, the overhead would be
much higher as we have to run tlb flush 100 times for one single page. 
Plus, tlb flush overhead will increase with the number of CPU cores due to
the bad scalability of tlb shootdown in HW, so those ARM64 servers should
expect much higher overhead.

Further perf annonate shows 95% cpu time of ptep_clear_flush is actually
used by the final dsb() to wait for the completion of tlb flush.  This
provides us a very good chance to leverage the existing batched tlb in
kernel.  The minimum modification is that we only send async tlbi in the
first stage and we send dsb while we have to sync in the second stage.

With the above simplest micro benchmark, collapsed time to finish the
program decreases around 5%.

Typical collapsed time w/o patch:
 ~ # time taskset -c 4 ./a.out
 0.21user 14.34system 0:14.69elapsed
w/ patch:
 ~ # time taskset -c 4 ./a.out
 0.22user 13.45system 0:13.80elapsed

Also tested with benchmark in the commit on Kunpeng920 arm64 server
and observed an improvement around 12.5% with command
`time ./swap_bench`.
        w/o             w/
real    0m13.460s       0m11.771s
user    0m0.248s        0m0.279s
sys     0m12.039s       0m11.458s

Originally it's noticed a 16.99% overhead of ptep_clear_flush()
which has been eliminated by this patch:

[root@localhost yang]# perf record -- ./swap_bench && perf report
[...]
16.99%  swap_bench  [kernel.kallsyms]  [k] ptep_clear_flush

It is tested on 4,8,128 CPU platforms and shows to be beneficial on
large systems but may not have improvement on small systems like on
a 4 CPU platform.

Also this patch improve the performance of page migration. Using pmbench
and tries to migrate the pages of pmbench between node 0 and node 1 for
100 times for 1G memory, this patch decrease the time used around 20%
(prev 18.338318910 sec after 13.981866350 sec) and saved the time used
by ptep_clear_flush().

Link: https://lkml.kernel.org/r/20230717131004.12662-5-yangyicong@huawei.com
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nadav Amit <namit@vmware.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Barry Song <baohua@kernel.org>
Cc: Darren Hart <darren@os.amperecomputing.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: lipeifeng <lipeifeng@oppo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:12:37 -07:00
Tiezhu Yang
8379c1552b Documentation/features: Refresh support files for 6.5
Run the refresh script [1] to document the recent feature additions.

[1] Documentation/features/scripts/features-refresh.sh

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/1689060720-4628-3-git-send-email-yangtiezhu@loongson.cn
2023-07-14 12:42:49 -06:00
Tiezhu Yang
f4135fca44 Documentation/features: Check ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT selects ARCH_HAS_ELF_RANDOMIZE,
so add ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT as another Kconfig check
for ELF-ASLR feature, then the refresh script can be used to handle
this case for all archs.

Co-developed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/1689060720-4628-2-git-send-email-yangtiezhu@loongson.cn
2023-07-14 12:42:49 -06:00
Youling Tang
f02644e32c LoongArch: Add jump-label implementation
Add support for jump labels based on the ARM64 version.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:44 +08:00
Tiezhu Yang
5d55377040 LoongArch: Select HAVE_DEBUG_KMEMLEAK to support kmemleak
We can see that DEBUG_KMEMLEAK depends on HAVE_DEBUG_KMEMLEAK after
commit b69ec42b1b ("Kconfig: clean up the long arch list for the
DEBUG_KMEMLEAK config option"), just select HAVE_DEBUG_KMEMLEAK to
support kmemleak on LoongArch.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-29 20:58:44 +08:00
Heiko Carstens
e7615c9225 s390: enable ARCH_HAS_MEMBARRIER_SYNC_CORE
s390 trivially supports the ARCH_HAS_MEMBARRIER_SYNC_CORE requirements
since the used lpswe(y) instruction to return from any kernel context to
user space performs CPU serialization. This is very similar to arm, arm64
and powerpc.

See commit 70216e18e5 ("membarrier: Provide core serializing command,
*_SYNC_CORE") for further details.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27 17:19:52 +02:00
Michael Schmitz
6baaade155 m68k: Add kernel seccomp support
Add secure_computing() call to syscall_trace_enter to actually
filter system calls.

Add necessary arch Kconfig options, define TIF_SECCOMP trace
flag and provide basic seccomp filter support in asm/syscall.h

syscall_get_nr currently uses the syscall nr stored in orig_d0
because we change d0 to a default return code before starting a
syscall trace. This may be inconsistent with syscall_rollback
copying orig_d0 to d0 (which we never check upon return from
trace). We use d0 for the return code from syscall_trace_enter
in entry.S currently, and could perhaps expand that to store
a new syscall number returned by the seccomp filter before
executing the syscall. This clearly needs some discussion.

seccomp_bpf self test on ARAnyM passes 81 out of 94 tests.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-3-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-01-30 16:40:15 +01:00
Linus Torvalds
eb67d239f3 RISC-V Patches for the 6.2 Merge Window, Part 1
* Support for the T-Head PMU via the perf subsystem.
 * ftrace support for rv32.
 * Support for non-volatile memory devices.
 * Various fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmOZ6WsTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiWGcD/wLGiHq3ekQhl5D+CaA1WlJ5XzQFfY2
 bv1ZCZGdjuiv66jiMlmEsbpfUCk3bSAIjCO3MHQNDmTuPJztCHVJXOHbZFWItzzO
 soW4nXHKW1sGHa7hDLGQUPkltA48OdPoyqEDvlnpyEWFT+2xHwdFEURWE85FXGeq
 ZzFSKUQqX/V52n9TS4M4QtmNnQatR3TgIs8ttzD4JqwWFBbp4/iBfIGt6n3W24XH
 9lKWikO4YOYUPl0KVIakM4d8NmX7g+7vhCKWavLke1fF/IQOlyWwA0eM8ryj33OG
 L1nFkqfF3mCw9i72WHftlc0rAgVqcYS8ntnQkPNpt2zPp3xFjDwEy+XiZrRE+sAp
 m5Ma2Tkw7G3ueBtXwP1yo+EKa7PrVFbCRD/rEpLJAC6+9ktvc7cYs39E08O+wrwT
 qkYThDolovqMOqfOq6afEGy5lfIa5U00vxK+3MXiE3eLEjHSJhwTXadUbwyMjJWE
 zOwA6p5NfDFzklESSNTtIBY85Zlh/g2q6GWCy7yBQnlaSdbpDxcnAlSZipq66Iqm
 9ytdZiHid4BIRQxr5qyXTB184BvFnWNRs9NGhCj38uLEnuxwSChzwoh/WPDxLNte
 U9ouvwJO5U2qAZsMGJhY8W2s/9WvWpSqRhSMA/nnNV1Hh+URFz8rFXAln6kNn//v
 j+cYGCyjLnO1hg==
 =4Ak2
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the T-Head PMU via the perf subsystem

 - ftrace support for rv32

 - Support for non-volatile memory devices

 - Various fixes and cleanups

* tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
  Documentation: RISC-V: patch-acceptance: s/implementor/implementer
  Documentation: RISC-V: Mention the UEFI Standards
  Documentation: RISC-V: Allow patches for non-standard behavior
  Documentation: RISC-V: Fix a typo in patch-acceptance
  riscv: Fixup compile error with !MMU
  riscv: Fix P4D_SHIFT definition for 3-level page table mode
  riscv: Apply a static assert to riscv_isa_ext_id
  RISC-V: Add some comments about the shadow and overflow stacks
  RISC-V: Align the shadow stack
  RISC-V: Ensure Zicbom has a valid block size
  RISC-V: Introduce riscv_isa_extension_check
  RISC-V: Improve use of isa2hwcap[]
  riscv: Don't duplicate _ALTERNATIVE_CFG* macros
  riscv: alternatives: Drop the underscores from the assembly macro names
  riscv: alternatives: Don't name unused macro parameters
  riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2
  riscv: mm: call best_map_size many times during linear-mapping
  riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
  riscv: Fix crash during early errata patching
  riscv: boot: add zstd support
  ...
2022-12-14 15:23:49 -08:00
Tiezhu Yang
cc8c418b4f Documentation/features: Use loongarch instead of loong
The official arch name is LoongArch [1], we should use small letter
loongarch instead of loong in Documentation/features, just use the
features-refresh.sh to refresh all the related files.

[1] https://www.kernel.org/doc/html/latest/loongarch/index.html

Fixes: 5860800e86 ("Documentation/features: Update the arch support status files")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1670156327-9631-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-12-05 02:50:12 -07:00
Tiezhu Yang
7b5a5242fd Documentation/features-refresh.sh: Only sed the beginning "arch" of ARCH_DIR
It should only sed the beginning "arch" of ARCH_DIR in features-refresh.sh,
otherwise loongarch is recognized as loong, that is not what we want.

Fixes: be99f610a1 ("Documentation/features: Add script that refreshes the arch support status files in place")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1670156327-9631-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-12-05 02:50:12 -07:00
Wei Li
7f2e60ff51 Documentation/features: Update feature lists for 6.1
Run the refresh script to document the recent feature additions
on loong, um and csky as of v6.1-rc7.

Signed-off-by: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20221203093750.4145802-1-liwei391@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-12-03 03:54:20 -07:00
Liu Shixin
310f541a02
riscv: Enable HAVE_ARCH_HUGE_VMAP for 64BIT
This sets the HAVE_ARCH_HUGE_VMAP option, and defines the required page
table functions. With this feature, ioremap area will be mapped with
huge page granularity according to its actual size. This feature can be
disabled by kernel parameter "nohugeiomap".

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20221012120038.1034354-2-liushixin2@huawei.com
[Palmer: minor formatting]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-28 17:10:01 -07:00
Linus Torvalds
c040862bfb Xtensa updates for v5.20
- support KCOV
 - enable ARCH_HAS_GCOV_PROFILE_ALL
 - minor ISS network driver cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmLsCugTHGpjbXZia2Jj
 QGdtYWlsLmNvbQAKCRBR+cyR+D+gRI9xD/9R+LcQFYoWXKJv57XAopM3q5QsR8hZ
 sQNWnErzf+LpUVCZHlniyQkywf6KpILm6lRHTd4qs/ny8B5rjnbWLD2xx8qSZ9lq
 6YT5HtimCj6qeU7eQPp4OAf9NNC6bkpYOFF0D5eU+smgS1A2PyZnYGMvXWPwUhtM
 R+z4+CIB0XHRWazNC7hrJOAmge0rWQgpiDxRQMYCKTQH1o1MZc5F0k9V/OJtVDRt
 zLiC7fMI6Uijsw9woAU9sfl4zU7FnM0S10gXtL2J/e5DEKovDegHeGrHpXyNBtCG
 9xnCXu285XKRlGDXGtO+EnSgmHmPmaIxW4F5I3uK/fCdfex4NdbuLf+WWuK2eSPM
 KDWLlWq76F9/Fdv4yPQoysUWoEXNjbpsgESITZdatyLZMZtUGE7rM4ysHOxN/VOG
 cDa1jwY9Od7Mg6HfVO1sm+8ZcY4adsMKfyUVp55H5l6Dvd44o50wF5Eblrq0ouuC
 zkBlnFdxn5CxyaMFNgaGJuAcdW5BesQdRLhmjh06uAC9WXOSmq1aGjt9IcKjBH+4
 Uf/8iiVmQtcUanFokcbNlgByIaJ7Mwik13yMY6cVk7I4+3NoI15OWIF54241gtHb
 6glbBkbTOTO3S1l1MasqAUDZjYl2yJxtckoVAREzDmMMlsYqJZ5J8UEmjJNNiqN0
 f52eQXMUFZxjuQ==
 =CLFr
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-20220804' of https://github.com/jcmvbkbc/linux-xtensa

Pull xtensa updates from Max Filippov:

 - support KCOV

 - enable ARCH_HAS_GCOV_PROFILE_ALL

 - minor ISS network driver cleanups

* tag 'xtensa-20220804' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: enable ARCH_HAS_GCOV_PROFILE_ALL
  xtensa: enable KCOV support
  xtensa: iss: fix handling error cases in iss_net_configure()
  xtensa: iss/network: provide release() callback
  xtensa: iss/network: drop 'devices' list
2022-08-04 15:35:58 -07:00
Linus Torvalds
7d9d077c78 RCU pull request for v5.20 (or whatever)
This pull request contains the following branches:
 
 doc.2022.06.21a: Documentation updates.
 
 fixes.2022.07.19a: Miscellaneous fixes.
 
 nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new
 	RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to
 	be offloaded at boot time, regardless of kernel boot parameters.
 	This is useful to battery-powered systems such as ChromeOS
 	and Android.  In addition, a new RCU_NOCB_CPU_CB_BOOST kernel
 	boot parameter prevents offloaded callbacks from interfering
 	with real-time workloads and with energy-efficiency mechanisms.
 
 poll.2022.07.21a: Polled grace-period updates, perhaps most notably
 	making these APIs account for both normal and expedited grace
 	periods.
 
 rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing
 	the CPU overhead of RCU tasks trace grace periods by more than
 	a factor of two on a system with 15,000 tasks.	The reduction
 	is expected to increase with the number of tasks, so it seems
 	reasonable to hypothesize that a system with 150,000 tasks might
 	see a 20-fold reduction in CPU overhead.
 
 torture.2022.06.21a: Torture-test updates.
 
 ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into
 	context tracking, thus reducing the overhead of transitioning to
 	kernel mode from either idle or nohz_full userspace execution
 	for kernels that track context independently of RCU.  This is
 	expected to be helpful primarily for kernels built with
 	CONFIG_NO_HZ_FULL=y.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmLgMcgTHHBhdWxtY2tA
 a2VybmVsLm9yZwAKCRCevxLzctn7jArXD/0fjbCwqpRjHVTzjMY8jN4zDkqZZD6m
 g8Fx27hZ4ToNFwRptyHwNezrNj14skjAJEXfdjaVw32W62ivXvf0HINvSzsTLCSq
 k2kWyBdXLc9CwY5p5W4smnpn5VoAScjg5PoPL59INoZ/Zziji323C7Zepl/1DYJt
 0T6bPCQjo1ZQoDUCyVpSjDmAqxnderWG0MeJVt74GkLqmnYLANg0GH8c7mH4+9LL
 kVGlLp5nlPgNJ4FEoFdMwNU8T/ETmaVld/m2dkiawjkXjJzB2XKtBigU91DDmXz5
 7DIdV4ABrxiy4kGNqtIe/jFgnKyVD7xiDpyfjd6KTeDr/rDS8u2ZH7+1iHsyz3g0
 Np/tS3vcd0KR+gI/d0eXxPbgm5sKlCmKw/nU2eArpW/+4LmVXBUfHTG9Jg+LJmBc
 JrUh6aEdIZJZHgv/nOQBNig7GJW43IG50rjuJxAuzcxiZNEG5lUSS23ysaA9CPCL
 PxRWKSxIEfK3kdmvVO5IIbKTQmIBGWlcWMTcYictFSVfBgcCXpPAksGvqA5JiUkc
 egW+xLFo/7K+E158vSKsVqlWZcEeUbsNJ88QOlpqnRgH++I2Yv/LhK41XfJfpH+Y
 ALxVaDd+mAq6v+qSHNVq9wT3ozXIPy/zK1hDlMIqx40h2YvaEsH4je+521oSoN9r
 vX60+QNxvUBLwA==
 =vUNm
 -----END PGP SIGNATURE-----

Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:

 - Documentation updates

 - Miscellaneous fixes

 - Callback-offload updates, perhaps most notably a new
   RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
   offloaded at boot time, regardless of kernel boot parameters.

   This is useful to battery-powered systems such as ChromeOS and
   Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
   parameter prevents offloaded callbacks from interfering with
   real-time workloads and with energy-efficiency mechanisms

 - Polled grace-period updates, perhaps most notably making these APIs
   account for both normal and expedited grace periods

 - Tasks RCU updates, perhaps most notably reducing the CPU overhead of
   RCU tasks trace grace periods by more than a factor of two on a
   system with 15,000 tasks.

   The reduction is expected to increase with the number of tasks, so it
   seems reasonable to hypothesize that a system with 150,000 tasks
   might see a 20-fold reduction in CPU overhead

 - Torture-test updates

 - Updates that merge RCU's dyntick-idle tracking into context tracking,
   thus reducing the overhead of transitioning to kernel mode from
   either idle or nohz_full userspace execution for kernels that track
   context independently of RCU.

   This is expected to be helpful primarily for kernels built with
   CONFIG_NO_HZ_FULL=y

* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
  rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
  rcu: Diagnose extended sync_rcu_do_polled_gp() loops
  rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
  rcutorture: Test polled expedited grace-period primitives
  rcu: Add polled expedited grace-period primitives
  rcutorture: Verify that polled GP API sees synchronous grace periods
  rcu: Make Tiny RCU grace periods visible to polled APIs
  rcu: Make polled grace-period API account for expedited grace periods
  rcu: Switch polled grace-period APIs to ->gp_seq_polled
  rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
  rcu/nocb: Add option to opt rcuo kthreads out of RT priority
  rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
  rcu/nocb: Add an option to offload all CPUs on boot
  rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
  rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
  rcu/nocb: Add/del rdp to iterate from rcuog itself
  rcu/tree: Add comment to describe GP-done condition in fqs loop
  rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
  rcu/kvfree: Remove useless monitor_todo flag
  rcu: Cleanup RCU urgency state for offline CPU
  ...
2022-08-02 19:12:45 -07:00
Max Filippov
0847d167d0 xtensa: enable ARCH_HAS_GCOV_PROFILE_ALL
Select ARCH_HAS_GCOV_PROFILE_ALL and set GCOV_PROFILE = n inside
arch/xtensa/boot/lib.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-07-14 00:54:47 -07:00
Max Filippov
c49731a04e xtensa: enable KCOV support
Select ARCH_HAS_KCOV and set KCOV_INSTRUMENT = n inside
arch/xtensa/boot/lib.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-07-14 00:54:46 -07:00
Frederic Weisbecker
24a9c54182 context_tracking: Split user tracking Kconfig
Context tracking is going to be used not only to track user transitions
but also idle/IRQs/NMIs. The user tracking part will then become a
separate feature. Prepare Kconfig for that.

[ frederic: Apply Max Filippov feedback. ]

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-06-29 17:04:09 -07:00
Kefeng Wang
893dea9ccd arm64: Add HAVE_IOREMAP_PROT support
With ioremap_prot() definition from generic ioremap, also move
pte_pgprot() from hugetlbpage.c into pgtable.h, then arm64 could
have HAVE_IOREMAP_PROT, which will enable generic_access_phys()
code, it is useful for debug, eg, gdb.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220607125027.44946-7-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2022-06-27 12:22:31 +01:00
Zheng Zengkai
5860800e86 Documentation/features: Update the arch support status files
The arch support status files don't match reality as of v5.19-rc1,
use the features-refresh.sh to refresh all the arch-support.txt files
in place.  The main effect is to add entries for the new loong
architecture.

Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Link: https://lore.kernel.org/r/20220609025656.143460-1-zhengzengkai@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-06-09 09:35:57 -06:00
Linus Torvalds
16477cdfef asm-generic changes for 5.19
The asm-generic tree contains three separate changes for linux-5.19:
 
 - The h8300 architecture is retired after it has been effectively
   unmaintained for a number of years. This is the last architecture we
   supported that has no MMU implementation, but there are still a few
   architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with
   and without an MMU.
 
 - A series to add a generic ticket spinlock that can be shared by most
   architectures with a working cmpxchg or ll/sc type atomic, including
   the conversion of riscv, csky and openrisc. This series is also a
   prerequisite for the loongarch64 architecture port that will come as
   a separate pull request.
 
 - A cleanup of some exported uapi header files to ensure they can be
   included from user space without relying on other kernel headers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKPlXoACgkQmmx57+YA
 GNkxrRAAnuSgOUo9JC5C4Gm2Q9yhEUHU1QIYeVO0jlan5CkF18bo1Loptq4MdQtO
 /0pXJPH8rFhDSJQLetO4AAjEMDfJGR5ibmf7SasO03HjqC9++fIeN047MbnkHAwY
 hFqIkgqn4l+g1RMWK5WUSDJ3XQ7p5/yWzpg/CuxJ+D0w9by/LWI5A+2NKGXOS3GF
 yi7cWvIKC1l+PmrH3BFA+JYVTvFzlr9P6x5pSEBi6HmjGQR+Xn3s0bnIf6DGRZ+B
 Q6v03kMxtcqI9e9C0r0r7ZGbdMuRTYbGrksa4EfK0yJM9P0HchhTtT9zawAK7Ddv
 VMM4B+9r60UEM++hOLS6XrLJdn+Fv+OJDnhONb5c+Mndd8cwV1JbOlVbUlGkn92e
 WSdUCW6m0TBzDs9Ae1++1kUl1LodlcmSzxlb0ueAhU01QacCPlneyIEKUhcrCl5w
 ITVw4YVa/BVCh+HvTEdhhak/Qb/nWiojMY+UIH5smiwj6FSFdwEmmgCgHAKprQaA
 STMxRnccFknGW9CZheoMATYsPIHQKPlm9lbiulSoMLDHxGwshU/6vKD4HDoZU51d
 HPmUZeKVPahXCUXB4iFI3qD4Ltxaru9VbgfUiY18VB2oc6Mk+0oeh6luqwsrgBdz
 P2sQ2riZKhN5Frm3DCh7IbJqoqKHlLMWh0itpNllgP5SDmDJjng=
 =ri2Q
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic tree contains three separate changes for linux-5.19:

   - The h8300 architecture is retired after it has been effectively
     unmaintained for a number of years. This is the last architecture
     we supported that has no MMU implementation, but there are still a
     few architectures (arm, m68k, riscv, sh and xtensa) that support
     CPUs with and without an MMU.

   - A series to add a generic ticket spinlock that can be shared by
     most architectures with a working cmpxchg or ll/sc type atomic,
     including the conversion of riscv, csky and openrisc. This series
     is also a prerequisite for the loongarch64 architecture port that
     will come as a separate pull request.

   - A cleanup of some exported uapi header files to ensure they can be
     included from user space without relying on other kernel headers"

* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  h8300: remove stale bindings and symlink
  sparc: add asm/stat.h to UAPI compile-test coverage
  powerpc: add asm/stat.h to UAPI compile-test coverage
  mips: add asm/stat.h to UAPI compile-test coverage
  riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
  kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
  agpgart.h: do not include <stdlib.h> from exported header
  csky: Move to generic ticket-spinlock
  RISC-V: Move to queued RW locks
  RISC-V: Move to generic spinlocks
  openrisc: Move to ticket-spinlock
  asm-generic: qrwlock: Document the spinlock fairness requirements
  asm-generic: qspinlock: Indicate the use of mixed-size atomics
  asm-generic: ticket-lock: New generic ticket-based spinlock
  remove the h8300 architecture
2022-05-26 10:50:30 -07:00
Max Filippov
af7a16e567 xtensa: enable ARCH_HAS_DEBUG_VM_PGTABLE
xtensa kernels successfully build and run with
CONFIG_DEBUG_VM_PGTABLE=y, enable arch support for it.

Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-05-01 19:51:57 -07:00
Max Filippov
507185695e xtensa: enable HAVE_VIRT_CPU_ACCOUNTING_GEN
There's no direct cputime_t manipulation in the xtensa arch code, so
generic virt CPU accounting may be enabled.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-05-01 19:51:22 -07:00
Max Filippov
55427d5b0d xtensa: enable context tracking
Put user exit context tracking call on the common kernel entry/exit path
(function calls are impossible at earlier kernel entry stages because
PS.EXCM is not cleared yet). Put user entry context tracking call on the
user exit path. Syscalls go through this common code too, so nothing
specific needs to be done for them.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-05-01 19:51:21 -07:00
Arnd Bergmann
fba2689ee7 Merge branch 'remove-h8300' of git://git.infradead.org/users/hch/misc into asm-generic
* 'remove-h8300' of git://git.infradead.org/users/hch/misc:
  remove the h8300 architecture

This is clearly the least actively maintained architecture we have at
the moment, and probably the least useful. It is now the only one that
does not support MMUs at all, and most of the boards only support 4MB
of RAM, out of which the defconfig kernel needs more than half just
for .text/.data.

Guenter Roeck did the original patch to remove the architecture in 2013
after it had already been obsolete for a while, and Yoshinori Sato brought
it back in a much more modern form in 2015. Looking at the git history
since the reinstantiation, it's clear that almost all commits in the tree
are build fixes or cross-architecture cleanups:

$ git log --no-merges --format=%an v4.5.. arch/h8300/  | sort | uniq
-c | sort -rn | head -n 12
     25 Masahiro Yamada
     18 Christoph Hellwig
     14 Mike Rapoport
      9 Arnd Bergmann
      8 Mark Rutland
      7 Peter Zijlstra
      6 Kees Cook
      6 Ingo Molnar
      6 Al Viro
      5 Randy Dunlap
      4 Yury Norov

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-04 14:42:49 +02:00
Alan Kao
aec499c75c nds32: Remove the architecture
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit
RISC target designed by Andes Technologies. Support was added to the
kernel in 2016 as the replacement RISC-V based V5 processors were
already announced, and maintained by (current or former) Andes
employees.

As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.

While the port is still in a reasonably good shape, it only gets
worse over time without active maintainers, so it seems best
to remove it before it becomes unusable. As always, if it turns
out that there are mainline users after all, and they volunteer
to maintain the port in the future, the removal can be reverted.

Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/
Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/
Link: https://www.andestech.com/en/products-solutions/andestar-architecture/
Signed-off-by: Alan Kao <alankao@andestech.com>
[arnd: rewrite changelog to provide more background]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-07 13:54:59 +01:00
Christoph Hellwig
1c4b5ecb7e remove the h8300 architecture
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-02-23 08:52:50 +01:00
Ard Biesheuvel
4a2f57ac7d ARM: 9158/1: leave it to core code to manage thread_info::cpu
Since commit bcf9033e54 ("sched: move CPU field back into thread_info
if THREAD_INFO_IN_TASK=y"), the CPU field in thread_info went back to
being managed by the core code, so we no longer have to keep it in sync
in arch code.

While at it, mark THREAD_INFO_IN_TASK as done for ARM in the
documentation.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-12-17 11:34:31 +00:00
Helge Deller
2214c0e772 parisc: Move thread_info into task struct
This implements the CONFIG_THREAD_INFO_IN_TASK option.

With this change:
- before thread_info was part of the stack and located at the beginning of the stack
- now the thread_info struct is moved and located inside the task_struct structure
- the stack is allocated and handled like the major other platforms
- drop the cpu field of thread_info and use instead the one in task_struct

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
2021-11-01 07:35:59 +01:00
Linus Torvalds
b79bd0d510 RISC-V Patches for the 5.15 Merge Window, Part 2
* A pair of defconfig additions, for NVMe and the EFI filesystem
   localization options.
 * A larger address space for stack randomization.
 * A cleanup to our install rules.
 * A DTS update for the Microchip Icicle board, to fix the serial
   console.
 * Support for build-time table sorting, which allows us to have
   __ex_table read-only.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmE84S4THHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiYAlD/9NMmgarbs7kWtQjNPleAonwbgRHjW8
 3yVXDhxuAIihkr+grje6eahon17gbLcLhzSq89fUBUKe0gvRLbjV/So8P2pYre2K
 l5xIl+F72ULNM6KkjitPe972kFHnuR7IBlCy4zQhoNhc1XGd4qExE9T51v3dT3vg
 flIJwuc1lg/Knz96EoiNMufS3UjNqNDxxa54anplGXZW25jumnQELFlQTsxlRO3F
 FO+3JsiF7wzaxCNpWzmSsvMmXAaW9XerGKAIumtzRsXQ4EqPBfYdn/p+4A11QIUv
 R4cdsl/QP5XST3zR74ZXblaVCHXUZun3N0FHbdhmTcu2stdcs7q3GtWfR6H+OiQm
 igWwRn0MLPEiqmx12Ss+WELZOB/tyA14HHj6HE9gxbPcYcXO62Ok7Qg6gP4qMYkL
 3v6yqZ/WWdJEi7mzRrk5mTZAMgAdXf5Je6eAOxY3hCbwtC2UMOA1qCj3Ir9XW/pN
 TC/SDLDSqV9AfAZ2hRqxV1VLCASh0mTqt7yq+Vp/jBd4S8MevXV6LS9YGMxjTR2v
 OzUMS53oZhddLSemZRi/cp1B8PP0Ih2A/f816iY+9MswJWZAkR6TqJL8TfSbQh2u
 f3yTVAkRvavi7gnJ/s1HuzavRFtv452zmrBGhGh4IsGctSPWn/C+U2N5Pl3bEDhw
 88R+rkAJkfLRkw==
 =4SV6
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

 - A pair of defconfig additions, for NVMe and the EFI filesystem
   localization options.

 - A larger address space for stack randomization.

 - A cleanup to our install rules.

 - A DTS update for the Microchip Icicle board, to fix the serial
   console.

 - Support for build-time table sorting, which allows us to have
   __ex_table read-only.

* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move EXCEPTION_TABLE to RO_DATA segment
  riscv: Enable BUILDTIME_TABLE_SORT
  riscv: dts: microchip: mpfs-icicle: Fix serial console
  riscv: move the (z)install rules to arch/riscv/Makefile
  riscv: Improve stack randomisation on RV64
  riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
  riscv: defconfig: enable BLK_DEV_NVME
2021-09-11 14:29:42 -07:00
Kefeng Wang
d5935537c8
riscv: Improve stack randomisation on RV64
This enlarges the bits availiable for stack randomisation on RV64 from
the default of 8MiB to 1GiB, to match arm64 and x86.

Also, update the documentation to reflect our support for stack
randomisation.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[Palmer: commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-09-10 22:25:34 -07:00
Mark Rutland
d4477209c8 Documentation/features/vm: correct huge-vmap APIs
In commit:

  bbc180a5ad ("mm: HUGE_VMAP arch support cleanup")

We replaced:

  * ioremap_pud_enabled() with arch_vmap_pud_supported()
  * ioremap_pmd_enabled() with arch_vmap_pmd_supported()

Update the documentation accordingly.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20210817091621.16799-1-mark.rutland@arm.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-08-24 13:31:00 -06:00
Jisheng Zhang
27f373cb5c Documentation/features/vm: riscv supports THP now
After commit e88b333142 ("riscv: mm: add THP support on 64-bit"),
riscv can support THP.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20210805002739.23f44d2d@xhacker
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-08-12 08:54:33 -06:00
Ingo Molnar
d3fb38266a Documentation/features: Add THREAD_INFO_IN_TASK feature matrix
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/YN2nhV5F0hBVNPuX@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-15 06:33:44 -06:00
Ingo Molnar
842f697776 Documentation/features: Update the ARCH_HAS_TICK_BROADCAST entry
Risc-V gained support recently.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/YN2nqOVHgGDt4Iid@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-15 06:33:44 -06:00
Linus Torvalds
c70a4be130 powerpc updates for 5.13
- Enable KFENCE for 32-bit.
 
  - Implement EBPF for 32-bit.
 
  - Convert 32-bit to do interrupt entry/exit in C.
 
  - Convert 64-bit BookE to do interrupt entry/exit in C.
 
  - Changes to our signal handling code to use user_access_begin/end() more extensively.
 
  - Add support for time namespaces (CONFIG_TIME_NS)
 
  - A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
 
  - Other smaller features, fixes & cleanups.
 
 Thanks to: Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
   Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le Goater, Chen Huang, Chris
   Packham, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Dan Carpenter, Daniel
   Axtens, Daniel Henrique Barboza, David Gibson, Davidlohr Bueso, Denis Efremov,
   dingsenjie, Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
   Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren Myneni, He Ying,
   Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee Jones, Leonardo Bras, Li Huafei,
   Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Nathan Chancellor, Nathan
   Lynch, Nicholas Piggin, Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi
   Bangoria, Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
   Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen Rothwell, Thadeu Lima
   de Souza Cascardo, Thomas Gleixner, Tony Ambardar, Tyrel Datwyler, Vaibhav Jain,
   Vincenzo Frascino, Xiongwei Song, Yang Li, Yu Kuai, Zhang Yunkai.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmCLV1kTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLUyD/4jrTolG4sVec211hYO+0VuJzoqN4Cf
 j2CA2Ju39butnSMiq4LJUPRB7QRZY1OofkoNFpZeDQspjfZXPz2ulpYAz+SxHWE2
 ReHPmWH1rOABlUPXFboePF4OLwmAs9eR5mN2z9HpKXbT3k78HaToLqiONyB4fVCr
 Q5TkJeRn/Y7ZJLdyPLTpczHHleQ8KoM6kT7ncXnTm6p97JOBJSrGaJ5N/8X5a4+e
 6jtgB7Pvw8jNDShSr8BDLBgBZZcmoTiuG8KfgwRZ+m+mKB1yI2X8S/a54w/lDi9g
 UcSv3jQcFLJuW+T/pYe4R330uWDYa0cwjJOtMmsJ98S4EYOevoe9fZuL97qNshme
 xtBr4q1i03G1icYOJJ8dXtvabG2rUzj8t1SCDpwYfrynzTWVRikiQYTXUBhRSFoK
 nsoklvKd2IZa485XYJ2ljSyClMy8S4yJJ9RuzZ94DTXDSJUesKuyRWGnso4mhkcl
 wvl4wwMTJvnCMKVo6dsJyV24QWfd6dABxzm04uPA94CKhG33UwK8252jXVeaohSb
 WSO7qWBONgDXQLJ0mXRcEYa9NHvFS4Jnp6APbxnHr1gS+K+PNkD4gPBf34FoyN0E
 9s27kvEYk5vr8APUclETF6+FkbGUD5bFbusjt3hYloFpAoHQ/k5pFVDsOZNPA8sW
 fDIRp05KunDojw==
 =dfKL
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Enable KFENCE for 32-bit.

 - Implement EBPF for 32-bit.

 - Convert 32-bit to do interrupt entry/exit in C.

 - Convert 64-bit BookE to do interrupt entry/exit in C.

 - Changes to our signal handling code to use user_access_begin/end()
   more extensively.

 - Add support for time namespaces (CONFIG_TIME_NS)

 - A series of fixes that allow us to reenable STRICT_KERNEL_RWX.

 - Other smaller features, fixes & cleanups.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.

* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
  powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
  powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
  powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
  powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
  powerpc/kasan: Fix shadow start address with modules
  powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
  powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
  powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
  powerpc/iommu: Annotate nested lock for lockdep
  powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
  powerpc/iommu: Allocate it_map by vmalloc
  selftests/powerpc: remove unneeded semicolon
  powerpc/64s: remove unneeded semicolon
  powerpc/eeh: remove unneeded semicolon
  powerpc/selftests: Add selftest to test concurrent perf/ptrace events
  powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
  powerpc/selftests/perf-hwbreak: Coalesce event creation code
  powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
  powerpc/configs: Add IBMVNIC to some 64-bit configs
  selftests/powerpc: Add uaccess flush test
  ...
2021-04-30 12:22:28 -07:00
Aneesh Kumar K.V
937c49d10b powerpc/mm: Revert "powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc"
This reverts commit 675bceb097 ("powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc")

All the related issues are fixed as of commit:
  f14312e1ed ("mm/debug_vm_pgtable: avoid doing memory allocation with pgtable_t mapped.")

Hence re-enable it.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034855.74513-1-aneesh.kumar@linux.ibm.com
2021-03-31 16:46:55 +11:00
Barry Song
6bfef171d0 Documentation/features: mark BATCHED_UNMAP_TLB_FLUSH doesn't apply to ARM64
BATCHED_UNMAP_TLB_FLUSH is used on x86 to do batched tlb shootdown by
sending one IPI to TLB flush all entries after unmapping pages rather
than sending an IPI to flush each individual entry.
On arm64, tlb shootdown is done by hardware. Flush instructions are
innershareable. The local flushes are limited to the boot (1 per CPU)
and when a task is getting a new ASID.
So marking this feature as "TODO" is not proper. ".." isn't good as
well. So this patch adds a "N/A" for this kind of features which are
not needed on some architectures.

Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210223003230.11976-1-song.bao.hua@hisilicon.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-15 13:17:40 -06:00
Arnd Bergmann
a910f43efd Documentation: features: refresh feature list
Run the update script to document the recent feature additions
on riscv, mips and csky.

Fixes: c109f42450 ("csky: Add kmemleak support")
Fixes: 8b3165e545 ("MIPS: Enable GCOV")
Fixes: 1ddc96bd42 ("MIPS: kernel: Support extracting off-line stack traces from user-space with perf")
Fixes: 74784081aa ("riscv: Add uprobes supported")
Fixes: 829adda597 ("riscv: Add KPROBES_ON_FTRACE supported")
Fixes: c22b0bcb1d ("riscv: Add kprobes supported")
Fixes: dcdc7a53a8 ("RISC-V: Implement ptrace regs and stack API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210225142841.3385428-2-arnd@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-02-25 11:25:57 -07:00
Arnd Bergmann
4f3c8320c7 Documentation: features: remove c6x references
The references to arch/c6x are obsolete now that the architecture
is gone. Remove them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210225142841.3385428-1-arnd@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-02-25 11:25:57 -07:00
Linus Torvalds
c45647f9f5 ARM updates for 5.11:
- Rework phys/virt translation
 - Add KASan support
 - Move DT out of linear map region
 - Use more PC-relative addressing in assembly
 - Remove FP emulation handling while in kernel mode
 - Link with '-z norelro'
 - remove old check for GCC <= 4.2 in ARM unwinder code
 - disable big endian if using clang's linker
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl/ghq0ACgkQ9OeQG+St
 rGQXsxAAilC+P06NRN3etSFOnJH8GzGNu89wbVW/0lft89o+EpN8oZ9kEYRdb4d1
 AJ1z4kGN0akKKNWWeg+1c2YzXh4xGvT1th1TzbBpCf8BxoMHFCSS1IZ98LZ3iiqy
 bpMRpq2LJG+Va/5lkPnkY7e2sL9Jj5BxFdHAYUUg1Ipc0tfh7hXWLnRMohE1EYmu
 E69AHTfyWs9ojgspCSg3KoUQ3eXUiaBslf8U4/zFhtmA9lwiOOozZ4ZRRgDWqI75
 bp6pGzxpqXIFdD1QyThgSb3gvVBahbsYN7kj1fmD5LokBVWxHawCyzkCzNzKEfDL
 ES+gc/wTewxwN928cjB5vfmOrAvd1T6amh/gsr39WnOIFngEPAGMBfApXAzhffsc
 L5TYaDI3DNbQ75FCySfVV2VwQhSW03XQHYtElVxzc2Z1Q1Q9yoscqLzgHDgDy3LM
 8s4CRviVtOzP9e/rNx48lUxgdQHmAjQ+dI4Y9NVxyphQzK0LLTv5Uc4zy/nG0F27
 QIFtGCDz3PHDPWLzGBudYcu9HAqwXVhZXf9pMeYgwgvmqBdz0BFbXhEbZaup6oDl
 H5k4iAZh3ADW38+8Vhp/D7CGDhznZm2dFNrgreJm2tHTEwd5xgpsUj1MaAMCcPbr
 HTxiy0i4p9wN1jl9iWFD4A3/KsBvAIJFB+wqqJOyWku0FikntjU=
 =fZGX
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux

Pull ARM updates from Russell King:

 - Rework phys/virt translation

 - Add KASan support

 - Move DT out of linear map region

 - Use more PC-relative addressing in assembly

 - Remove FP emulation handling while in kernel mode

 - Link with '-z norelro'

 - remove old check for GCC <= 4.2 in ARM unwinder code

 - disable big endian if using clang's linker

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits)
  ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
  ARM: 9038/1: Link with '-z norelro'
  ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro
  ARM: 9036/1: uncompress: Fix dbgadtb size parameter name
  ARM: 9035/1: uncompress: Add be32tocpu macro
  ARM: 9033/1: arm/smp: Drop the macro S(x,s)
  ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
  ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol
  ARM: 9044/1: vfp: use undef hook for VFP support detection
  ARM: 9034/1: __div64_32(): straighten up inline asm constraints
  ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode
  ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
  ARM: 9028/1: disable KASAN in call stack capturing routines
  ARM: 9026/1: unwind: remove old check for GCC <= 4.2
  ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD
  ARM: 9024/1: Drop useless cast of "u64" to "long long"
  ARM: 9023/1: Spelling s/mmeory/memory/
  ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak
  ARM: kvm: replace open coded VA->PA calculations with adr_l call
  ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET
  ...
2020-12-22 13:34:27 -08:00