[ Upstream commit 6d1c69945c ]
The code currently uses list_for_each_entry_rcu() while holding an SRCU
lock, triggering false positive warnings with CONFIG_PROVE_RCU=y
enabled:
drivers/nvme/host/core.c:3770 RCU-list traversed in non-reader section!!
While the list is properly protected by SRCU lock, the code uses the wrong
list traversal primitive. Replace list_for_each_entry_rcu() with
list_for_each_entry_srcu() to correctly indicate SRCU-based protection
and eliminate the false warning.
Fixes: be647e2c76 ("nvme: use srcu for iterating namespace list")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d06923670b ]
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
This fix helps avoid the observed crash by implementing keep-alive as a
synchronous operation so that we decrement admin->q_usage_counter only
after keep-alive command finished its execution and returns the command
status back up to its caller (blk_execute_rq()). This would ensure that
fabric shutdown code path doesn't destroy the fabric admin queue until
keep-alive request finished execution and also keep-alive thread is not
running hw/hctx queue dispatch operation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c199fac88f ]
While shutting down loop controller, we first quiesce the admin/IO queue,
delete the admin/IO tag-set and then at last destroy the admin/IO queue.
However it's quite possible that during the window between quiescing and
destroying of the admin/IO queue, some admin/IO request might sneak in
and if that happens then we could potentially encounter a hung task
because shutdown operation can't forward progress until any pending I/O
is flushed off.
This commit helps ensure that before destroying the admin/IO queue, we
unquiesce the admin/IO queue so that any outstanding requests, which are
added after the admin/IO queue is quiesced, are now flushed to its
completion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f021341ee ]
We need to suppress the partition scan from occuring within the
controller's scan_work context. If a path error occurs here, the IO will
wait until a path becomes available or all paths are torn down, but that
action also occurs within scan_work, so it would deadlock. Defer the
partion scan to a different context that does not block scan_work.
Reported-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ce96a6708 ]
Disable NVME_CC_CRIME so that CSTS.RDY indicates that the media
is ready and able to handle commands without returning
NVME_SC_ADMIN_COMMAND_MEDIA_NOT_READY.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2f551b1f7 ]
ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup()
for the same controller. So it's better to nullify it after release on
error path in order to avoid double free later in nvmet_destroy_auth().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 7a277c37d3 ("nvmet-auth: Diffie-Hellman key exchange support")
Cc: stable@vger.kernel.org
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26bc0a81f6 ]
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.
Fixes: 949928c1c7 ("NVMe: Fix possible queue use after freed")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06c59d4270 ]
During resets, if queues are unquiesced first, then the host can submit
IOs to the controller using shadow doorbell logic but the controller
won't be aware. This can lead to necessary MMIO doorbells from being
not issued, causing requests to be delayed and timed-out.
Signed-off-by: William Butler <wab@google.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Stable-dep-of: 26bc0a81f6 ("nvme-pci: fix race condition between reset and nvme_dev_disable()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63bcf9014e ]
NVME_NSHEAD_DISK_LIVE is a flag for struct nvme_ns_head, not nvme_ns.
The current code has a typo causing NVME_NSHEAD_DISK_LIVE never to
be cleared once device_add_disk_fails, causing the system never to
create the 'generic' character device. Even several rescan attempts
will change the situation and the system has to be rebooted to fix
the issue.
Fixes: 11384580e3 ("nvme-multipath: add error handling support for add_disk()")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 83bdfcbdbe upstream.
Another device has been reported to be unreliable if we have more than
one outstanding command. In this new case, data corruption may occur.
Since we have two devices now needing this quirky behavior, make a
generic quirk flag.
The same Apple quirk is clearly not "temporary", so update the comment
while moving it.
Link: https://lore.kernel.org/linux-nvme/191d810a4e3.fcc6066c765804.973611676137075390@collabora.com/
Reported-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Christoph Hellwig hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Cc: "Gagniuc, Alexandru" <alexandru.gagniuc@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6f01bdbfef ]
If a drive is unable to create IO queues on the initial probe, a
subsequent reset will need to allocate the tagset if IO queue creation
is successful. Without this, blk_mq_update_nr_hw_queues will crash on a
bad pointer due to the invalid tagset.
Fixes: eac3ef2629 ("nvme-pci: split the initial probe from the rest path")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5572a55a6f ]
If the commands allocation fails in nvmet_tcp_alloc_cmds()
the kernel crashes in nvmet_tcp_release_queue_work() because of
a NULL pointer dereference.
nvmet: failed to install queue 0 cntlid 1 ret 6
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Fix the bug by setting queue->nr_cmds to zero in case
nvmet_tcp_alloc_cmd() fails.
Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 61aa894e7a upstream.
On some TUXEDO platforms, a Samsung 990 Evo NVMe leads to a high
power consumption in s2idle sleep (2-3 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a
sleep with a lower power consumption, typically around 0.5 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ff0ffe5b7c ]
This function wants to move a subset of a list from one element to the
tail into another list. It also needs to use the srcu synchronize
instead of the regular rcu version. Do this one element at a time
because that's the only to do it.
Fixes: be647e2c76 ("nvme: use srcu for iterating namespace list")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be647e2c76 ]
The nvme pci driver synchronizes with all the namespace queues during a
reset to ensure that there's no pending timeout work.
Meanwhile the timeout work potentially iterates those same namespaces to
freeze their queues.
Each of those namespace iterations use the same read lock. If a write
lock should somehow get between the synchronize and freeze steps, then
forward progress is deadlocked.
We had been relying on the nvme controller state machine to ensure the
reset work wouldn't conflict with timeout work. That guarantee may be a
bit fragile to rely on, so iterate the namespace lists without taking
potentially circular locks, as reported by lockdep.
Link: https://lore.kernel.org/all/20220930001943.zdbvolc3gkekfmcv@shindev/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73964c1d07 ]
It is possible that the host connected and saw a cm established
event and started sending nvme capsules on the qp, however the
ctrl did not yet see an established event. This is why the
rsp_wait_list exists (for async handling of these cmds, we move
them to a pending list).
Furthermore, it is possible that the ctrl cm times out, resulting
in a connect-error cm event. in this case we hit a bad deref [1]
because in nvmet_rdma_free_rsps we assume that all the responses
are in the free list.
We are freeing the cmds array anyways, so don't even bother to
remove the rsp from the free_list. It is also guaranteed that we
are not racing anything when we are releasing the queue so no
other context accessing this array should be running.
[1]:
--
Workqueue: nvmet-free-wq nvmet_rdma_free_queue_work [nvmet_rdma]
[...]
pc : nvmet_rdma_free_rsps+0x78/0xb8 [nvmet_rdma]
lr : nvmet_rdma_free_queue_work+0x88/0x120 [nvmet_rdma]
Call trace:
nvmet_rdma_free_rsps+0x78/0xb8 [nvmet_rdma]
nvmet_rdma_free_queue_work+0x88/0x120 [nvmet_rdma]
process_one_work+0x1ec/0x4a0
worker_thread+0x48/0x490
kthread+0x158/0x160
ret_from_fork+0x10/0x18
--
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0889d13b9e ]
When the length check for an icreq sqe fails we should not
continue processing but rather return immediately as all
other contents of that sqe cannot be relied on.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e80eb792b ]
The memory allocated for the identification is freed on failure. Set
it to NULL so the caller doesn't have a pointer to that freed address.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e716cec6f ]
The first command issued from the host to the target is the fabrics
connect command. At this point, neither the target queue nor the
controller have been allocated. But we already try to trace this command
in nvmet_req_init.
Reported by KASAN.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ab091ec536 upstream.
There is a hardware power-saving problem with the Lenovo N60z
board. When turn it on and leave it for 10 hours, there is a
20% chance that a nvme disk will not wake up until reboot.
Link: https://lore.kernel.org/all/2B5581C46AC6E335+9c7a81f1-05fb-4fd0-9fbb-108757c21628@uniontech.com
Signed-off-by: hmy <huanglin@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cf546dd289 ]
If we allocate a bio that is larger than NVMe maximum request size,
attach integrity metadata to it and send it to the NVMe subsystem, the
integrity metadata will be corrupted.
Splitting the bio works correctly. The function bio_split will clone the
bio, trim the iterator of the first bio and advance the iterator of the
second bio.
However, the function rq_integrity_vec has a bug - it returns the first
vector of the bio's metadata and completely disregards the metadata
iterator that was advanced when the bio was split. Thus, the second bio
uses the same metadata as the first bio and this leads to metadata
corruption.
This commit changes rq_integrity_vec, so that it calls mp_bvec_iter_bvec
instead of returning the first vector. mp_bvec_iter_bvec reads the
iterator and uses it to build a bvec for the current position in the
iterator.
The "queue_max_integrity_segments(rq->q) > 1" check was removed, because
the updated rq_integrity_vec function works correctly with multiple
segments.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/49d1afaa-f934-6ed2-a678-e0d428c63a65@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31fad1470 ]
nvme_map_data() is called when request has physical segments, hence
the nvme_unmap_data() should have same condition to avoid dereference.
Fixes: 4aedb70543 ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92fc2c469e ]
pcie_aspm=off tells the kernel not to modify the ASPM configuration. This
setting does not guarantee that ASPM (Active State Power Management) is
disabled. Hence add pcie_port_pm=off. This disables power management for
all PCIe ports.
This patch has been tested on a workstation with a Samsung SSD 970 EVO Plus
NVMe SSD.
Fixes: 4641a8e6e1 ("nvme-pci: add trouble shooting steps for timeouts")
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89f58f96d1 ]
If we fail to call nvme_auth_augmented_challenge, or fail to kmalloc
for shash, we should free the memory allocation for challenge, so add
err path out_free_challenge to fix the memory leak.
Fixes: 7a277c37d3 ("nvmet-auth: Diffie-Hellman key exchange support")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9570a48847 ]
The value of NVME_NS_DEAC is 3,
which means NVME_NS_METADATA_SUPPORTED | NVME_NS_EXT_LBAS. Provide a
unique value for this feature flag.
Fixes 1b96f862ec ("nvme: implement the DEAC bit for the Write Zeroes command")
Signed-off-by: Boyang Yu <yuboyang@dapustor.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd0c1b8e04 ]
The spec doesn't mandate that the first two double words (aka results)
for the command queue entry need to be set to 0 when they are not
used (not specified). Though, the target implemention returns 0 for TCP
and FC but not for RDMA.
Let's make RDMA behave the same and thus explicitly initializing the
result field. This prevents leaking any data from the stack.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5d574ab37 ]
If a discard request needs to be retried, and that retry may fail before
a new special payload is added, a double free will result. Clear the
RQF_SPECIAL_LOAD when the request is cleaned.
Signed-off-by: Chunguang Xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c758b77d4a ]
In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we
know that a ctrl was allocated (in the admin connect request handler)
and we need to release pending AERs, clear ctrl->sqs and sq->ctrl
(for nvme-loop primarily), and drop the final reference on the ctrl.
However, a small window is possible where nvmet_sq_destroy starts (as
a result of the client giving up and disconnecting) concurrently with
the nvme admin connect cmd (which may be in an early stage). But *before*
kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq
live reference). In this case, sq->ctrl was allocated however after it was
captured in a local variable in nvmet_sq_destroy.
This prevented the final reference drop on the ctrl.
Solve this by re-capturing the sq->ctrl after all inflight request has
completed, where for sure sq->ctrl reference is final, and move forward
based on that.
This issue was observed in an environment with many hosts connecting
multiple ctrls simoutanuosly, creating a delay in allocating a ctrl
leading up to this race window.
Reported-by: Alex Turin <alex@vastdata.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bd293fcf3 ]
bio_vec start offset may be relatively large particularly when large
folio gets added to the bio. A bigger offset will result in avoiding the
single-segment mapping optimization and end up using expensive
mempool_alloc further.
Rather than using absolute value, adjust bv_offset by
NVME_CTRL_PAGE_SIZE while checking if segment can be fitted into one/two
PRP entries.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3a043733f ]
In current native multipath design when a shared namespace is created,
we loop through each possible numa-node, calculate the NUMA distance of
that node from each nvme controller and then cache the optimal IO path
for future reference while sending IO. The issue with this design is that
we may refer to the NUMA distance table for an offline node which may not
be populated at the time and so we may inadvertently end up finding and
caching a non-optimal path for IO. Then latter when the corresponding
numa-node becomes online and hence the NUMA distance table entry for that
node is created, ideally we should re-calculate the multipath node distance
for the newly added node however that doesn't happen unless we rescan/reset
the controller. So essentially, we may keep using non-optimal IO path for a
node which is made online after namespace is created.
This patch helps fix this issue ensuring that when a shared namespace is
created, we calculate the multipath node distance for each online numa-node
instead of each possible numa-node. Then latter when a node becomes online
and we receive any IO on that newly added node, we would calculate the
multipath node distance for newly added node but this time NUMA distance
table would have been already populated for newly added node. Hence we
would be able to correctly calculate the multipath node distance and choose
the optimal path for the IO.
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d76584e53f ]
The id override functions return a status which is not propagated to the
caller.
Fixes: c1fef73f79 ("nvmet: add passthru code to process commands")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1a1fdd709 ]
Fix the parsing if extra status bits (e.g. MORE) is present.
Fixes: 7fb42780d0 ("nvme: Convert NVMe errors to PR errors")
Signed-off-by: Weiwen Hu <huweiwen@linux.alibaba.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f97914e35f ]
When disabling an nvmet namespace, there is a period where the
subsys->lock is released, as the ns disable waits for backend IO to
complete, and the ns percpu ref to be properly killed. The original
intent was to avoid taking the subsystem lock for a prolong period as
other processes may need to acquire it (for example new incoming
connections).
However, it opens up a window where another process may come in and
enable the ns, (re)intiailizing the ns percpu_ref, causing the disable
sequence to hang.
Solve this by taking the global nvmet_config_sem over the entire configfs
enable/disable sequence.
Fixes: a07b4970f4 ("nvmet: add a generic NVMe target")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2e4c5f5f6 ]
There are io stats accounting that needs to be handled, so don't call
blk_mq_end_request() directly. Use the existing nvme_end_req() helper
that already handles everything.
Fixes: d4d957b53d ("nvme-multipath: support io stats on the mpath device")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d15dcd0f1a ]
The nsid value is a u32 that comes from nvmet_req_find_ns(). It's
endian data and we're on an error path and both of those raise red
flags. So let's make this safer.
1) Make the buffer large enough for any u32.
2) Remove the unnecessary initialization.
3) Use snprintf() instead of sprintf() for even more safety.
4) The sprintf() function returns the number of bytes printed, not
counting the NUL terminator. It is impossible for the return value to
be <= 0 so delete that.
Fixes: 505363957f ("nvmet: fix nvme status code when namespace is disabled")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 505363957f ]
If the user disabled a nvmet namespace, it is removed from the subsystem
namespaces list. When nvmet processes a command directed to an nsid that
was disabled, it cannot differentiate between a nsid that is disabled
vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS
with the dnr bit set.
This translates to a non-retryable status for the host, which translates
to a user error. We should expect disabled namespaces to not cause an
I/O error in a multipath environment.
Address this by searching a configfs item for the namespace nvmet failed
to find, and if we found one, conclude that the namespace is disabled
(perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case
and keep DNR bit cleared.
Reported-by: Jirong Feng <jirong.feng@easystack.cn>
Tested-by: Jirong Feng <jirong.feng@easystack.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6825bdde44 ]
When we teardown the controller, we wait for pending I/Os to complete
(sq->ref on all queues to drop to zero) and then we go over the commands,
and free their command buffers in case they are still fetching data from
the host (e.g. processing nvme writes) and have yet to take a reference
on the sq.
However, we may miss the case where commands have failed before executing
and are queued for sending a response, but will never occur because the
queue socket is already down. In this case we may miss deallocating command
buffers.
Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is
idempotent anyways.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25bb3534ee ]
While I/O is running, if the pci bus error occurs then
in-flight I/O can not complete. Worst, if at this time,
user (logically) hot-unplug the nvme disk then the
nvme_remove() code path can't forward progress until
in-flight I/O is cancelled. So these sequence of events
may potentially hang hot-unplug code path indefinitely.
This patch helps cancel the pending/in-flight I/O from the
nvme request timeout handler in case the nvme controller
is in the terminal (DEAD/DELETING/DELETING_NOIO) state and
that helps nvme_remove() code path forward progress and
finish successfully.
Link: https://lore.kernel.org/all/199be893-5dfa-41e5-b6f2-40ac90ebccc4@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 445f9119e7 ]
In nvmet_auth_host_hash(), if a mismatch is detected in the hash length
the kernel should print an error.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46b8f9f74f ]
If the nvmet_auth_host_hash() function fails, the error code should
be returned to its callers.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 863fe60ed2 ]
On system where native nvme multipath is configured and iopolicy
is set to numa but the nvme controller numa node id is undefined
or -1 (NUMA_NO_NODE) then avoid calculating node distance for
finding optimal io path. In such case we may access numa distance
table with invalid index and that may potentially refer to incorrect
memory. So this patch ensures that if the nvme controller numa node
id is -1 then instead of calculating node distance for finding optimal
io path, we set the numa node distance of such controller to default 10
(LOCAL_DISTANCE).
Link: https://lore.kernel.org/all/20240413090614.678353-1-nilay@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d5887dc6b6 upstream.
Sandisk SN530 NVMe drives have broken MSIs. On systems without MSI-X
support, all commands time out resulting in the following message:
nvme nvme0: I/O tag 12 (100c) QID 0 timeout, completion polled
These timeouts cause the boot to take an excessively-long time (over 20
minutes) while the initial command queue is flushed.
Address this by adding a quirk for drives with buggy MSIs. The lspci
output for this device (recorded on a system with MSI-X support) is:
02:00.0 Non-Volatile memory controller: Sandisk Corp Device 5008 (rev 01) (prog-if 02 [NVM Express])
Subsystem: Sandisk Corp Device 5008
Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0
Memory at f7e00000 (64-bit, non-prefetchable) [size=16K]
Memory at f7e04000 (64-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [b0] MSI-X: Enable+ Count=17 Masked-
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [1b8] Latency Tolerance Reporting
Capabilities: [300] Secondary PCI Express
Capabilities: [900] L1 PM Substates
Kernel driver in use: nvme
Kernel modules: nvme
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0bc2e80b9b ]
Move the stray '.' that is currently at the end of the line after
newline '\n' to before newline character which is the right position.
Fixes: ce8d78616a ("nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH")
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e89086c43f ]
This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for
device [126f:2262], which appears to be a generic VID:PID pair used for
many SSDs based on the Silicon Motion SM2262/SM2262EN controller.
Two of my SSDs with this VID:PID pair exhibit the same behavior:
* They frequently have trouble exiting the deepest power state (5),
resulting in the entire disk unresponsive.
Verified by setting nvme_core.default_ps_max_latency_us=10000 and
observing them behaving normally.
* They produce all-zero nguid and eui64 with `nvme id-ns` command.
The offending products are:
* HP SSD EX950 1TB
* HIKVISION C2000Pro 2TB
Signed-off-by: Jiawei Fu <i@ibugone.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de105068fe ]
We found a issue on production environment while using NVMe over RDMA,
admin_q reconnect failed forever while remote target and network is ok.
After dig into it, we found it may caused by a ABBA deadlock due to tag
allocation. In my case, the tag was hold by a keep alive request
waiting inside admin_q, as we quiesced admin_q while reset ctrl, so the
request maked as idle and will not process before reset success. As
fabric_q shares tagset with admin_q, while reconnect remote target, we
need a tag for connect command, but the only one reserved tag was held
by keep alive command which waiting inside admin_q. As a result, we
failed to reconnect admin_q forever. In order to fix this issue, I
think we should keep two reserved tags for admin queue.
Fixes: ed01fee283 ("nvme-fabrics: only reserve a single tag")
Signed-off-by: Chunguang Xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe506a7458 ]
We have to ensure that the tgtport is not going away
before be have remove all the associations.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 710c69dbac ]
When deleting an association the shutdown path is deadlocking because we
try to flush the nvmet_wq nested. Avoid this by deadlock by deferring
the put work into its own work item.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3146345c2e ]
When the target port has not active port binding, there is no point in
trying to process the command as it has to fail anyway. Instead adding
checks to all commands abort the command early.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca121a0f75 ]
The hostport data structure is shared between the association, this why
we keep track of the users via a refcount. So we should not decrement
the refcount on a match and free the hostport several times.
Reported by KASAN.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
