commit ab091ec536 upstream.
There is a hardware power-saving problem with the Lenovo N60z
board. When turn it on and leave it for 10 hours, there is a
20% chance that a nvme disk will not wake up until reboot.
Link: https://lore.kernel.org/all/2B5581C46AC6E335+9c7a81f1-05fb-4fd0-9fbb-108757c21628@uniontech.com
Signed-off-by: hmy <huanglin@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f50733b45d upstream.
When opening a file for exec via do_filp_open(), permission checking is
done against the file's metadata at that moment, and on success, a file
pointer is passed back. Much later in the execve() code path, the file
metadata (specifically mode, uid, and gid) is used to determine if/how
to set the uid and gid. However, those values may have changed since the
permissions check, meaning the execution may gain unintended privileges.
For example, if a file could change permissions from executable and not
set-id:
---------x 1 root root 16048 Aug 7 13:16 target
to set-id and non-executable:
---S------ 1 root root 16048 Aug 7 13:16 target
it is possible to gain root privileges when execution should have been
disallowed.
While this race condition is rare in real-world scenarios, it has been
observed (and proven exploitable) when package managers are updating
the setuid bits of installed programs. Such files start with being
world-executable but then are adjusted to be group-exec with a set-uid
bit. For example, "chmod o-x,u+s target" makes "target" executable only
by uid "root" and gid "cdrom", while also becoming setuid-root:
-rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target
becomes:
-rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target
But racing the chmod means users without group "cdrom" membership can
get the permission to execute "target" just before the chmod, and when
the chmod finishes, the exec reaches brpm_fill_uid(), and performs the
setuid to root, violating the expressed authorization of "only cdrom
group members can setuid to root".
Re-check that we still have execute permissions in case the metadata
has changed. It would be better to keep a copy from the perm-check time,
but until we can do that refactoring, the least-bad option is to do a
full inode_permission() call (under inode lock). It is understood that
this is safe against dead-locks, but hardly optimal.
Reported-by: Marco Vanotti <mvanotti@google.com>
Tested-by: Marco Vanotti <mvanotti@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bdd9ef7e9 upstream.
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
Fixes: c58305af18 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass")
Reported-by: Jann Horn <jannh@google.com>
Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Jonathan Cavitt <Jonathan.cavitt@intel.com>
[Joonas: Add Requires: tag]
Requires: 60a2066c50 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-3-andi.shyti@linux.intel.com
(cherry picked from commit 97b6784753)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f36851c36 upstream.
Entity controls should get_cur using an entity-defined function
instead of via a query. Fix this in uvc_ctrl_set.
Fixes: 65900c581d ("media: uvcvideo: Allow entity-defined get_info and get_cur")
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85f1506337 upstream.
Commit 237405ebef ("arm64: cpufeature: Force HWCAP to be based on the
sysreg visible to user-space") forced the hwcaps to use sanitised
user-space view of the id registers. However, the ID register structures
used to select few compat cpufeatures (vfp, crc32, ...) are masked and
hence such hwcaps do not appear in /proc/cpuinfo anymore for PER_LINUX32
personality.
Add the ID register structures explicitly and set the relevant entry as
visible. As these ID registers are now of type visible so make them
available in 64-bit userspace by making necessary changes in register
emulation logic and documentation.
While at it, update the comment for structure ftr_generic_32bits[] which
lists the ID register that use it.
Fixes: 237405ebef ("arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space")
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20221103082232.19189-1-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cff3bd012a upstream
nft_chain_validate already performs loop detection because a cycle will
result in a call stack overflow (ctx->level >= NFT_JUMP_STACK_SIZE).
It also follows maps via ->validate callback in nft_lookup, so there
appears no reason to iterate the maps again.
nf_tables_check_loops() and all its helper functions can be removed.
This improves ruleset load time significantly, from 23s down to 12s.
This also fixes a crash bug. Old loop detection code can result in
unbounded recursion:
BUG: TASK stack guard page was hit at ....
Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN
CPU: 4 PID: 1539 Comm: nft Not tainted 6.10.0-rc5+ #1
[..]
with a suitable ruleset during validation of register stores.
I can't see any actual reason to attempt to check for this from
nft_validate_register_store(), at this point the transaction is still in
progress, so we don't have a full picture of the rule graph.
For nf-next it might make sense to either remove it or make this depend
on table->validate_state in case we could catch an error earlier
(for improved error reporting to userspace).
Fixes: 20a69341f2 ("netfilter: nf_tables: add netlink set API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7395dfacff upstream
Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.
Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.
.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.
[ NB: rbtree GC updates has been excluded because GC is asynchronous. ]
Fixes: c3e1b005ed ("netfilter: nf_tables: add set element timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b53c116642 upstream.
Report the element that causes problems via netlink extended ACK for set
element commands.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3415b10a03 upstream.
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a7 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0 ("x86: implement x86_32 stack protector")
Link: 6461e53781 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: Fixed conflict in 32-bit version due to lack of 3fb0fdb3bb]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ecde5db159 upstream.
Compute the i2c timeout in jiffies from a value in milliseconds. The
original values of 2 jiffies equals 2 milliseconds if HZ has been
configured to a value of 1000. This corresponds to 2.2 milliseconds
used by most other DRM drivers. Update mgag200 accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 414c453106 ("mgag200: initial g200se driver (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e82290a2e0 upstream.
Address only transactions without any data are valid and should not
be flagged as short transactions. Simply return the message size when
no transaction errors occured.
CC: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318203925.2837689-1-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 919f18f961 upstream.
MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.
So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.
Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().
Add the missing capability check to prevent this.
Fixes: 2b1f6278d7 ("[PATCH] x86: Save the MTRRs of the BSP before booting an AP")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240808000244.946864-1-ak@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcf86c01ca upstream.
"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.
Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.
Fix this by preventing any further increments to "tracing_map->next_elt"
once it reaches "tracing_map->max_elt".
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 08d43a5fa0 ("tracing: Add lock-free tracing_map")
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Link: https://lore.kernel.org/20240805055922.6277-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81af7f2342 upstream.
Round constant_charge_voltage writes down to the first supported lower
value, rather then rounding them up to the first supported higher value.
This fixes e.g. writing 4250000 resulting in a value of 4350000 which
might be dangerous, instead writing 4250000 will now result in a safe
4200000 value.
Fixes: 843735b788 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240717200333.56669-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b34ce4a59c upstream.
info->max_cv is in millivolts, divide the microvolt value being written
to constant_charge_voltage by 1000 *before* clamping it to info->max_cv.
Before this fix the code always tried to set constant_charge_voltage
to max_cv / 1000 = 4 millivolt, which ends up in setting it to 4.1V
which is the lowest supported value.
Fixes: 843735b788 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240717200333.56669-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6eabce6608 upstream.
Calling ioctl TIOCSSERIAL with an invalid baud_base can
result in uartclk being zero, which will result in a
divide by zero error in uart_get_divisor(). The check for
uartclk being zero in uart_set_info() needs to be done
before other settings are made as subsequent calls to
ioctl TIOCSSERIAL for the same port would be impacted if
the uartclk check was done where uartclk gets set.
Oops: divide error: 0000 PREEMPT SMP KASAN PTI
RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580)
Call Trace:
<TASK>
serial8250_get_divisor (drivers/tty/serial/8250/8250_port.c:2576
drivers/tty/serial/8250/8250_port.c:2589)
serial8250_do_set_termios (drivers/tty/serial/8250/8250_port.c:502
drivers/tty/serial/8250/8250_port.c:2741)
serial8250_set_termios (drivers/tty/serial/8250/8250_port.c:2862)
uart_change_line_settings (./include/linux/spinlock.h:376
./include/linux/serial_core.h:608 drivers/tty/serial/serial_core.c:222)
uart_port_startup (drivers/tty/serial/serial_core.c:342)
uart_startup (drivers/tty/serial/serial_core.c:368)
uart_set_info (drivers/tty/serial/serial_core.c:1034)
uart_set_info_user (drivers/tty/serial/serial_core.c:1059)
tty_set_serial (drivers/tty/tty_io.c:2637)
tty_ioctl (drivers/tty/tty_io.c:2647 drivers/tty/tty_io.c:2791)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:907
fs/ioctl.c:893 fs/ioctl.c:893)
do_syscall_64 (arch/x86/entry/common.c:52
(discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Reported-by: syzkaller <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Rule: add
Link: https://lore.kernel.org/stable/1721148848-9784-1-git-send-email-george.kennedy%40oracle.com
Link: https://lore.kernel.org/r/1721219078-3209-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06c03c8edc upstream.
Using syzkaller with the recently reintroduced signed integer overflow
sanitizer produces this UBSAN report:
UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:738:18
9223372036854775806 + 4 cannot be represented in type 'long'
Call Trace:
handle_overflow+0x171/0x1b0
__do_adjtimex+0x1236/0x1440
do_adjtimex+0x2be/0x740
The user supplied time_constant value is incremented by four and then
clamped to the operating range.
Before commit eea83d896e ("ntp: NTP4 user space bits update") the user
supplied value was sanity checked to be in the operating range. That change
removed the sanity check and relied on clamping after incrementing which
does not work correctly when the user supplied value is in the overflow
zone of the '+ 4' operation.
The operation requires CAP_SYS_TIME and the side effect of the overflow is
NTP getting out of sync.
Similar to the fixups for time_maxerror and time_esterror, clamp the user
space supplied value to the operating range.
[ tglx: Switch to clamping ]
Fixes: eea83d896e ("ntp: NTP4 user space bits update")
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240517-b4-sio-ntp-c-v2-1-f3a80096f36f@google.com
Closes: https://github.com/KSPP/linux/issues/352
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15fffc6a56 upstream.
uevent_show() wants to de-reference dev->driver->name. There is no clean
way for a device attribute to de-reference dev->driver unless that
attribute is defined via (struct device_driver).dev_groups. Instead, the
anti-pattern of taking the device_lock() in the attribute handler risks
deadlocks with code paths that remove device attributes while holding
the lock.
This deadlock is typically invisible to lockdep given the device_lock()
is marked lockdep_set_novalidate_class(), but some subsystems allocate a
local lockdep key for @dev->mutex to reveal reports of the form:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc7+ #275 Tainted: G OE N
------------------------------------------------------
modprobe/2374 is trying to acquire lock:
ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220
but task is already holding lock:
ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&cxl_root_key){+.+.}-{3:3}:
__mutex_lock+0x99/0xc30
uevent_show+0xac/0x130
dev_attr_show+0x18/0x40
sysfs_kf_seq_show+0xac/0xf0
seq_read_iter+0x110/0x450
vfs_read+0x25b/0x340
ksys_read+0x67/0xf0
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (kn->active#6){++++}-{0:0}:
__lock_acquire+0x121a/0x1fa0
lock_acquire+0xd6/0x2e0
kernfs_drain+0x1e9/0x200
__kernfs_remove+0xde/0x220
kernfs_remove_by_name_ns+0x5e/0xa0
device_del+0x168/0x410
device_unregister+0x13/0x60
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c7/0x210
driver_detach+0x47/0x90
bus_remove_driver+0x6c/0xf0
cxl_acpi_exit+0xc/0x11 [cxl_acpi]
__do_sys_delete_module.isra.0+0x181/0x260
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The observation though is that driver objects are typically much longer
lived than device objects. It is reasonable to perform lockless
de-reference of a @driver pointer even if it is racing detach from a
device. Given the infrequency of driver unregistration, use
synchronize_rcu() in module_remove_driver() to close any potential
races. It is potentially overkill to suffer synchronize_rcu() just to
handle the rare module removal racing uevent_show() event.
Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1].
Fixes: c0a40097f0 ("drivers: core: synchronize really_probe() and dev_uevent()")
Reported-by: syzbot+4762dd74e32532cda5ff@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Closes: http://lore.kernel.org/5aa5558f-90a4-4864-b1b1-5d6784c5607d@I-love.SAKURA.ne.jp [1]
Link: http://lore.kernel.org/669073b8ea479_5fffa294c1@dwillia2-xfh.jf.intel.com.notmuch
Cc: stable@vger.kernel.org
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/172081332794.577428.9738802016494057132.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 87d571d6fb ]
Using syzkaller alongside the newly reintroduced signed integer overflow
sanitizer spits out this report:
UBSAN: signed-integer-overflow in ../kernel/time/ntp.c:461:16
9223372036854775807 + 500 cannot be represented in type 'long'
Call Trace:
handle_overflow+0x171/0x1b0
second_overflow+0x2d6/0x500
accumulate_nsecs_to_secs+0x60/0x160
timekeeping_advance+0x1fe/0x890
update_wall_time+0x10/0x30
time_maxerror is unconditionally incremented and the result is checked
against NTP_PHASE_LIMIT, but the increment itself can overflow, resulting
in wrap-around to negative space.
Before commit eea83d896e ("ntp: NTP4 user space bits update") the user
supplied value was sanity checked to be in the operating range. That change
removed the sanity check and relied on clamping in handle_overflow() which
does not work correctly when the user supplied value is in the overflow
zone of the '+ 500' operation.
The operation requires CAP_SYS_TIME and the side effect of the overflow is
NTP getting out of sync.
Miroslav confirmed that the input value should be clamped to the operating
range and the same applies to time_esterror. The latter is not used by the
kernel, but the value still should be in the operating range as it was
before the sanity check got removed.
Clamp them to the operating range.
[ tglx: Changed it to clamping and included time_esterror ]
Fixes: eea83d896e ("ntp: NTP4 user space bits update")
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: https://lore.kernel.org/all/20240517-b4-sio-ntp-usec-v2-1-d539180f2b79@google.com
Closes: https://github.com/KSPP/linux/issues/354
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ cast things to __kernel_long_t to fix compiler warnings - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6881e75237 upstream.
The recent fix for making the take over of the broadcast timer more
reliable retrieves a per CPU pointer in preemptible context.
This went unnoticed as compilers hoist the access into the non-preemptible
region where the pointer is actually used. But of course it's valid that
the compiler keeps it at the place where the code puts it which rightfully
triggers:
BUG: using smp_processor_id() in preemptible [00000000] code:
caller is hotplug_cpu__broadcast_tick_pull+0x1c/0xc0
Move it to the actual usage site which is in a non-preemptible region.
Fixes: f7d43dd206 ("tick/broadcast: Make takeover of broadcast hrtimer reliable")
Reported-by: David Wang <00107082@163.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yu Liao <liaoyu15@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ttg56ers.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab9fd06cb8 upstream.
The ufshcd_add_delay_before_dme_cmd() always introduces a delay of
MIN_DELAY_BEFORE_DME_CMDS_US between DME commands even when it's not
required. The delay is added when the UFS host controller supplies the
quirk UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS.
Fix the logic to update hba->last_dme_cmd_tstamp to ensure subsequent DME
commands have the correct delay in the range of 0 to
MIN_DELAY_BEFORE_DME_CMDS_US.
Update the timestamp at the end of the function to ensure it captures the
latest time after any necessary delay has been applied.
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Link: https://lore.kernel.org/r/20240724135126.1786126-1-vamshigajjela@google.com
Fixes: cad2e03d86 ("ufs: add support to allow non standard behaviours (quirks)")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 973a578916 upstream.
Make sure the descriptor has been set before looking at maxpacket.
This fixes a null pointer panic in this case.
This may happen if the gadget doesn't properly set up the endpoint
for the current speed, or the gadget descriptors are malformed and
the descriptor for the speed/endpoint are not found.
No current gadget driver is known to have this problem, but this
may cause a hard-to-find bug during development of new gadgets.
Fixes: 54f83b8c8e ("USB: gadget: Reject endpoints with 0 maxpacket value")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20240725010419.314430-2-crwulff@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00af4f3dda upstream.
This driver is intended as a "client" end of the console connection.
When connected to a host it's supposed to receive debug logs, and
possibly allow to interact with whatever debug console is available
there. Feeding messages back, depending on a configuration may cause log
messages be executed as shell commands (which can be really bad if one
is unlucky, imagine a log message like "prevented running `rm -rf
/home`"). In case of Xen, it exposes sysrq-like debug interface, and
feeding it its own logs will pretty quickly hit 'R' for "instant
reboot".
Contrary to a classic serial console, the USB one cannot be configured
ahead of time, as the device shows up only when target OS is up. And at
the time device is opened to execute relevant ioctl, it's already too
late, especially when logs start flowing shortly after device is
initialized.
Avoid the issue by changing default to no echo for this type of devices.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
[ johan: amend summary; disable also ECHONL ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit afdcfd3d6f upstream.
At a few places the driver carries stale pointers
to references that can still be used. Make sure that does not happen.
This strictly speaking closes ZDI-CAN-22273, though there may be
similar races in the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240709113851.14691-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 730bbfaf7d ]
The effective SPI clock frequency should never exceed speed_hz
otherwise this might result in undefined behavior of the SPI device.
Currently the scldiv calculation could violate this constraint.
For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz,
the function fsl_lpspi_set_bitrate will determine perscale = 0 and
scldiv = 1, which is a effective SPI clock of 8 MHz.
So fix this by rounding up the quotient of perclk_rate and speed_hz.
While this never change within the loop, we can pull this out.
Fixes: 5314987de5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77736a98b8 ]
Add a error info when set a speed which greater than half of per-clk of
spi module.
The minimum SCK period is 2 cycles(CCR[SCKDIV]). So the maximum transfer
speed is half of spi per-clk.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 730bbfaf7d ("spi: spi-fsl-lpspi: Fix scldiv calculation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5e5afdb0e ]
Add both ipg and per clock for lpspi to support i.MX8QM/QXP boards.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 730bbfaf7d ("spi: spi-fsl-lpspi: Fix scldiv calculation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf86874bb9 ]
Configure watermark to change with the length of the sent data.
Support LPSPI sending message shorter than tx/rxfifosize.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 730bbfaf7d ("spi: spi-fsl-lpspi: Fix scldiv calculation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcd87317aa ]
Add slave mode support to the fsl-lpspi driver, only in PIO mode.
For now, there are some limitations for slave mode transmission:
1. The stale data in RXFIFO will be dropped when the Slave does any new
transfer.
2. One transfer can be finished only after all transfer->len data been
transferred to master device
3. Slave device only accepts transfer->len data. Any data longer than
this from master device will be dropped. Any data shorter than this
from master will cause LPSPI to stuck due to mentioned limitation 2.
4. Only PIO transfer is supported in Slave Mode.
Wire connection:
GND, SCK, MISO(to MISO of slave), MOSI(to MOSI of slave), SCS
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 730bbfaf7d ("spi: spi-fsl-lpspi: Fix scldiv calculation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07d7155749 ]
In order to enable the slave mode and make the code more readable,
replace all related structure names and object names which is
named "master" with "controller".
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 730bbfaf7d ("spi: spi-fsl-lpspi: Fix scldiv calculation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e8b53979a ]
After the commit 66665ad2f1 ("tracing/kprobe: bpf: Compare instruction
pointer with original one"), "bpf_kprobe_override" is not used anywhere
anymore, and we can remove it now.
Link: https://lore.kernel.org/all/20240710085939.11520-1-dongml2@chinatelecom.cn/
Fixes: 66665ad2f1 ("tracing/kprobe: bpf: Compare instruction pointer with original one")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6c29f710c ]
If a SMBus alert is received and the originating device is not found,
the reason may be that the address reported on the SMBus alert address
is corrupted, for example because multiple devices asserted alert and
do not correctly implement SMBus arbitration.
If this happens, call alert handlers on all devices connected to the
given I2C bus, in the hope that this cleans up the situation.
This change reliably fixed the problem on a system with multiple devices
on a single bus. Example log where the device on address 0x18 (ADM1021)
and on address 0x4c (ADT7461A) both had the alert line asserted:
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
lm90 3-0018: temp1 out of range, please check!
lm90 3-0018: Disabling ALERT#
lm90 3-0029: Everything OK
lm90 3-002a: Everything OK
lm90 3-004c: temp1 out of range, please check!
lm90 3-004c: temp2 out of range, please check!
lm90 3-004c: Disabling ALERT#
Fixes: b5527a7766 ("i2c: Add SMBus alert support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[wsa: fixed a typo in the commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37c526f00b ]
The following messages were observed while testing alert functionality
on systems with multiple I2C devices on a single bus if alert was active
on more than one chip.
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
and:
smbus_alert 3-000c: SMBALERT# from dev 0x28, flag 0
Once it starts, this message repeats forever at high rate. There is no
device at any of the reported addresses.
Analysis shows that this is seen if multiple devices have the alert pin
active. Apparently some devices do not support SMBus arbitration correctly.
They keep sending address bits after detecting an address collision and
handle the collision not at all or too late.
Specifically, address 0x0c is seen with ADT7461A at address 0x4c and
ADM1021 at address 0x18 if alert is active on both chips. Address 0x28 is
seen with ADT7483 at address 0x2a and ADT7461 at address 0x4c if alert is
active on both chips.
Once the system is in bad state (alert is set by more than one chip),
it often only recovers by power cycling.
To reduce the impact of this problem, abort the endless loop in
smbus_alert() if the same address is read more than once and not
handled by a driver.
Fixes: b5527a7766 ("i2c: Add SMBus alert support")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[wsa: it also fixed an interrupt storm in one of my experiments]
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[wsa: rebased, moved a comment as well, improved the 'invalid' value]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Stable-dep-of: f6c29f710c ("i2c: smbus: Send alert notifications to all devices if source not found")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dca0dd28fa ]
Getting the same alert twice in a row is legal and normal,
especially on a fast device (like running in qemu). Kind of
like interrupts. So don't report duplicate alerts, and deliver
them normally.
[JD: Fixed subject]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Stable-dep-of: f6c29f710c ("i2c: smbus: Send alert notifications to all devices if source not found")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adeec61a47 ]
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for a number of CPUs in commits:
* 7187bb7d0b ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417")
* 75b3c43eab ("arm64: errata: Expand speculative SSBS workaround")
Since then, similar errata have been published for a number of other Arm
Ltd CPUs, for which the same mitigation is sufficient. This is described
in their respective Software Developer Errata Notice (SDEN) documents:
* Cortex-A76 (MP052) SDEN v31.0, erratum 3324349
https://developer.arm.com/documentation/SDEN-885749/3100/
* Cortex-A77 (MP074) SDEN v19.0, erratum 3324348
https://developer.arm.com/documentation/SDEN-1152370/1900/
* Cortex-A78 (MP102) SDEN v21.0, erratum 3324344
https://developer.arm.com/documentation/SDEN-1401784/2100/
* Cortex-A78C (MP138) SDEN v16.0, erratum 3324346
https://developer.arm.com/documentation/SDEN-1707916/1600/
* Cortex-A78C (MP154) SDEN v10.0, erratum 3324347
https://developer.arm.com/documentation/SDEN-2004089/1000/
* Cortex-A725 (MP190) SDEN v5.0, erratum 3456106
https://developer.arm.com/documentation/SDEN-2832921/0500/
* Cortex-X1 (MP077) SDEN v21.0, erratum 3324344
https://developer.arm.com/documentation/SDEN-1401782/2100/
* Cortex-X1C (MP136) SDEN v16.0, erratum 3324346
https://developer.arm.com/documentation/SDEN-1707914/1600/
* Neoverse-N1 (MP050) SDEN v32.0, erratum 3324349
https://developer.arm.com/documentation/SDEN-885747/3200/
* Neoverse-V1 (MP076) SDEN v19.0, erratum 3324341
https://developer.arm.com/documentation/SDEN-1401781/1900/
Note that due to the manner in which Arm develops IP and tracks errata,
some CPUs share a common erratum number and some CPUs have multiple
erratum numbers for the same HW issue.
On parts without SB, it is necessary to use ISB for the workaround. The
spec_bar() macro used in the mitigation will expand to a "DSB SY; ISB"
sequence in this case, which is sufficient on all affected parts.
Enable the existing mitigation by adding the relevant MIDRs to
erratum_spec_ssbs_list. The list is sorted alphanumerically (involving
moving Neoverse-V3 after Neoverse-V2) so that this is easy to audit and
potentially extend again in future. The Kconfig text is also updated to
clarify the set of affected parts and the mitigation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240801101803.1982459-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: fix conflicts in silicon-errata.rst ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ef54a3845 ]
Add cputype definitions for Cortex-A725. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-A725 TRM:
https://developer.arm.com/documentation/107652/0001/
... in table A-247 ("MIDR_EL1 bit descriptions").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58d245e03c ]
Add cputype definitions for Cortex-X1C. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-X1C TRM:
https://developer.arm.com/documentation/101968/0002/
... in section B2.107 ("MIDR_EL1, Main ID Register, EL1").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec76876660 ]
Cortex-X4 erratum 3194386 and Neoverse-V3 erratum 3312417 are identical,
with duplicate Kconfig text and some unsightly ifdeffery. While we try
to share code behind CONFIG_ARM64_WORKAROUND_SPECULATIVE_SSBS, having
separate options results in a fair amount of boilerplate code, and this
will only get worse as we expand the set of affected CPUs.
To reduce this boilerplate, unify the two behind a common Kconfig
option. This removes the duplicate text and Kconfig logic, and removes
the need for the intermediate ARM64_WORKAROUND_SPECULATIVE_SSBS option.
The set of affected CPUs is described as a list so that this can easily
be extended.
I've used ARM64_ERRATUM_3194386 (matching the Neoverse-V3 erratum ID) as
the common option, matching the way we use ARM64_ERRATUM_1319367 to
cover Cortex-A57 erratum 1319537 and Cortex-A72 erratum 1319367.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: fix conflicts & renames, drop unneeded cpucaps.h ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd2ff5f0b3 ]
Add cputype definitions for Cortex-X925. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-285 ("MIDR_EL1 bit descriptions")
in issue 0001-05 of the Cortex-X925 TRM, which can be found at:
https://developer.arm.com/documentation/102807/0001/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit add332c403 ]
Add cputype definitions for Cortex-A720. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-186 ("MIDR_EL1 bit descriptions")
in issue 0002-05 of the Cortex-A720 TRM, which can be found at:
https://developer.arm.com/documentation/102530/0002/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be5a6f2387 ]
Add cputype definitions for Cortex-X3. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-263 ("MIDR_EL1 bit descriptions")
in issue 07 of the Cortex-X3 TRM, which can be found at:
https://developer.arm.com/documentation/101593/0102/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240603111812.1514101-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7187bb7d0b ]
Cortex-X4 and Neoverse-V3 suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time. This is described in their Software Developer Errata Notice (SDEN)
documents:
* Cortex-X4 SDEN v8.0, erratum 3194386:
https://developer.arm.com/documentation/SDEN-2432808/0800/
* Neoverse-V3 SDEN v6.0, erratum 3312417:
https://developer.arm.com/documentation/SDEN-2891958/0600/
To workaround these errata, it is necessary to place a speculation
barrier (SB) after MSR to the SSBS special-purpose register. This patch
adds the requisite SB after writes to SSBS within the kernel, and hides
the presence of SSBS from EL0 such that userspace software which cares
about SSBS will manipulate this via prctl(PR_GET_SPECULATION_CTRL, ...).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: fix conflicts & renames, drop unneeded cpucaps.h, fold in user_feature_fixup() ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ce85db6c2 ]
Add cputype definitions for Neoverse-V3. These will be used for errata
detection in subsequent patches.
These values can be found in Table B-249 ("MIDR_EL1 bit descriptions")
in issue 0001-04 of the Neoverse-V3 TRM, which can be found at:
https://developer.arm.com/documentation/107734/0001/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02a0a04676 ]
Add cputype definitions for Cortex-X4. These will be used for errata
detection in subsequent patches.
These values can be found in Table B-249 ("MIDR_EL1 bit descriptions")
in issue 0002-05 of the Cortex-X4 TRM, which can be found at:
https://developer.arm.com/documentation/102484/0002/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240508081400.235362-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: fix conflict (dealt with upstream via a later merge) ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4d9d9dcc7 ]
Add the part number and MIDR for Neoverse-V2
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240109192310.16234-2-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
[ Mark: trivial backport ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 237405ebef ]
arm64 advertises hardware features to user-space via HWCAPs, and by
emulating access to the CPUs id registers. The cpufeature code has a
sanitised system-wide view of an id register, and a sanitised user-space
view of an id register, where some features use their 'safe' value
instead of the hardware value.
It is currently possible for a HWCAP to be advertised where the user-space
view of the id register does not show the feature as supported.
Erratum workaround need to remove both the HWCAP, and the feature from
the user-space view of the id register. This involves duplicating the
code, and spreading it over cpufeature.c and cpu_errata.c.
Make the HWCAP code use the user-space view of id registers. This ensures
the values never diverge, and allows erratum workaround to remove HWCAP
by modifying the user-space view of the id register.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220909165938.3931307-2-james.morse@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: fixup lack of 'width' parameter, whitespace conflict ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
