After working with the larger SELinux-based distros for several
years, we're finally at a place where we can disable the SELinux
runtime disable functionality. The existing kernel deprecation
notice explains the functionality and why we want to remove it:
The selinuxfs "disable" node allows SELinux to be disabled at
runtime prior to a policy being loaded into the kernel. If
disabled via this mechanism, SELinux will remain disabled until
the system is rebooted.
The preferred method of disabling SELinux is via the "selinux=0"
boot parameter, but the selinuxfs "disable" node was created to
make it easier for systems with primitive bootloaders that did not
allow for easy modification of the kernel command line.
Unfortunately, allowing for SELinux to be disabled at runtime makes
it difficult to secure the kernel's LSM hooks using the
"__ro_after_init" feature.
It is that last sentence, mentioning the '__ro_after_init' hardening,
which is the real motivation for this change, and if you look at the
diffstat you'll see that the impact of this patch reaches across all
the different LSMs, helping prevent tampering at the LSM hook level.
From a SELinux perspective, it is important to note that if you
continue to disable SELinux via "/etc/selinux/config" it may appear
that SELinux is disabled, but it is simply in an uninitialized state.
If you load a policy with `load_policy -i`, you will see SELinux
come alive just as if you had loaded the policy during early-boot.
It is also worth noting that the "/sys/fs/selinux/disable" file is
always writable now, regardless of the Kconfig settings, but writing
to the file has no effect on the system, other than to display an
error on the console if a non-zero/true value is written.
Finally, in the several years where we have been working on
deprecating this functionality, there has only been one instance of
someone mentioning any user visible breakage. In this particular
case it was an individual's kernel test system, and the workaround
documented in the deprecation notice ("selinux=0" on the kernel
command line) resolved the issue without problem.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Introduce LSM_ORDER_LAST, to satisfy the requirement of LSMs needing to be
last, e.g. the 'integrity' LSM, without changing the kernel command line or
configuration.
Also, set this order for the 'integrity' LSM. While not enforced, this is
the only LSM expected to use it.
Similarly to LSM_ORDER_FIRST, LSMs with LSM_ORDER_LAST are always enabled
and put at the end of the LSM list, if selected in the kernel
configuration. Setting one of these orders alone, does not cause the LSMs
to be selected and compiled built-in in the kernel.
Finally, for LSM_ORDER_MUTABLE LSMs, set the found variable to true if an
LSM is found, regardless of its order. In this way, the kernel would not
wrongly report that the LSM is not built-in in the kernel if its order is
LSM_ORDER_LAST.
Fixes: 79f7865d84 ("LSM: Introduce "lsm=" for boottime LSM selection")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
As we were already making massive changes to security/security.c by
moving all of the function header comments above the function
definitions, let's take the opportunity to fix various style crimes.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCY/OUGBQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5baCAP0a4N8OiH5Sv9EQ5xAI8jbDwOeE/Aen
izx6RXiBncaY9QEA7WrXUS3y/8zO3dWSL9feviGDuajTn0bJpmWXkCeh8wM=
=pwAo
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity update from Mimi Zohar:
"One doc and one code cleanup, and two bug fixes"
* tag 'integrity-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Introduce MMAP_CHECK_REQPROT hook
ima: Align ima_file_mmap() parameters with mmap_file LSM hook
evm: call dump_security_xattr() in all cases to remove code duplication
ima: fix ima_delete_rules() kernel-doc warning
ima: return IMA digest value only when IMA_COLLECTED flag is set
ima: fix error handling logic when file measurement failed
Commit 98de59bfe4 ("take calculation of final prot in
security_mmap_file() into a helper") moved the code to update prot, to be
the actual protections applied to the kernel, to a new helper called
mmap_prot().
However, while without the helper ima_file_mmap() was getting the updated
prot, with the helper ima_file_mmap() gets the original prot, which
contains the protections requested by the application.
A possible consequence of this change is that, if an application calls
mmap() with only PROT_READ, and the kernel applies PROT_EXEC in addition,
that application would have access to executable memory without having this
event recorded in the IMA measurement list. This situation would occur for
example if the application, before mmap(), calls the personality() system
call with READ_IMPLIES_EXEC as the first argument.
Align ima_file_mmap() parameters with those of the mmap_file LSM hook, so
that IMA can receive both the requested prot and the final prot. Since the
requested protections are stored in a new variable, and the final
protections are stored in the existing variable, this effectively restores
the original behavior of the MMAP_CHECK hook.
Cc: stable@vger.kernel.org
Fixes: 98de59bfe4 ("take calculation of final prot in security_mmap_file() into a helper")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----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=klFk
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Improve the error handling in the device cgroup such that memory
allocation failures when updating the access policy do not
potentially alter the policy.
- Some minor fixes to reiserfs to ensure that it properly releases
LSM-related xattr values.
- Update the security_socket_getpeersec_stream() LSM hook to take
sockptr_t values.
Previously the net/BPF folks updated the getsockopt code in the
network stack to leverage the sockptr_t type to make it easier to
pass both kernel and __user pointers, but unfortunately when they did
so they didn't convert the LSM hook.
While there was/is no immediate risk by not converting the LSM hook,
it seems like this is a mistake waiting to happen so this patch
proactively does the LSM hook conversion.
- Convert vfs_getxattr_alloc() to return an int instead of a ssize_t
and cleanup the callers. Internally the function was never going to
return anything larger than an int and the callers were doing some
very odd things casting the return value; this patch fixes all that
and helps bring a bit of sanity to vfs_getxattr_alloc() and its
callers.
- More verbose, and helpful, LSM debug output when the system is booted
with "lsm.debug" on the command line. There are examples in the
commit description, but the quick summary is that this patch provides
better information about which LSMs are enabled and the ordering in
which they are processed.
- General comment and kernel-doc fixes and cleanups.
* tag 'lsm-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: Fix description of fs_context_parse_param
lsm: Add/fix return values in lsm_hooks.h and fix formatting
lsm: Clarify documentation of vm_enough_memory hook
reiserfs: Add missing calls to reiserfs_security_free()
lsm,fs: fix vfs_getxattr_alloc() return type and caller error paths
device_cgroup: Roll back to original exceptions after copy failure
LSM: Better reporting of actual LSMs at boot
lsm: make security_socket_getpeersec_stream() sockptr_t safe
audit: Fix some kernel-doc warnings
lsm: remove obsoleted comments for security hooks
fs: edit a comment made in bad taste
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCY5b27RAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSg9YA/0K10H+VsGt1+qqR4+w9SM7SFzbgszrV3Yw9
rwiPgaPVAP9rxXPr2bD2hAk7/Lv9LeJ2kfM9RzMErP1A6UsC5YVbDA==
=mAG7
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This adds file truncation support to Landlock, contributed by Günther
Noack. As described by Günther [1], the goal of these patches is to
work towards a more complete coverage of file system operations that
are restrictable with Landlock.
The known set of currently unsupported file system operations in
Landlock is described at [2]. Out of the operations listed there,
truncate is the only one that modifies file contents, so these patches
should make it possible to prevent the direct modification of file
contents with Landlock.
The new LANDLOCK_ACCESS_FS_TRUNCATE access right covers both the
truncate(2) and ftruncate(2) families of syscalls, as well as open(2)
with the O_TRUNC flag. This includes usages of creat() in the case
where existing regular files are overwritten.
Additionally, this introduces a new Landlock security blob associated
with opened files, to track the available Landlock access rights at
the time of opening the file. This is in line with Unix's general
approach of checking the read and write permissions during open(), and
associating this previously checked authorization with the opened
file. An ongoing patch documents this use case [3].
In order to treat truncate(2) and ftruncate(2) calls differently in an
LSM hook, we split apart the existing security_path_truncate hook into
security_path_truncate (for truncation by path) and
security_file_truncate (for truncation of previously opened files)"
Link: https://lore.kernel.org/r/20221018182216.301684-1-gnoack3000@gmail.com [1]
Link: https://www.kernel.org/doc/html/v6.1/userspace-api/landlock.html#filesystem-flags [2]
Link: https://lore.kernel.org/r/20221209193813.972012-1-mic@digikod.net [3]
* tag 'landlock-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
samples/landlock: Document best-effort approach for LANDLOCK_ACCESS_FS_REFER
landlock: Document Landlock's file truncation support
samples/landlock: Extend sample tool to support LANDLOCK_ACCESS_FS_TRUNCATE
selftests/landlock: Test ftruncate on FDs created by memfd_create(2)
selftests/landlock: Test FD passing from restricted to unrestricted processes
selftests/landlock: Locally define __maybe_unused
selftests/landlock: Test open() and ftruncate() in multiple scenarios
selftests/landlock: Test file truncation support
landlock: Support file truncation
landlock: Document init_layer_masks() helper
landlock: Refactor check_access_path_dual() into is_access_to_paths_allowed()
security: Create file_truncate hook from path_truncate hook
Commit 4ff09db1b7 ("bpf: net: Change sk_getsockopt() to take the
sockptr_t argument") made it possible to call sk_getsockopt()
with both user and kernel address space buffers through the use of
the sockptr_t type. Unfortunately at the time of conversion the
security_socket_getpeersec_stream() LSM hook was written to only
accept userspace buffers, and in a desire to avoid having to change
the LSM hook the commit author simply passed the sockptr_t's
userspace buffer pointer. Since the only sk_getsockopt() callers
at the time of conversion which used kernel sockptr_t buffers did
not allow SO_PEERSEC, and hence the
security_socket_getpeersec_stream() hook, this was acceptable but
also very fragile as future changes presented the possibility of
silently passing kernel space pointers to the LSM hook.
There are several ways to protect against this, including careful
code review of future commits, but since relying on code review to
catch bugs is a recipe for disaster and the upstream eBPF maintainer
is "strongly against defensive programming", this patch updates the
LSM hook, and all of the implementations to support sockptr_t and
safely handle both user and kernel space buffers.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
So far posix acls were passed as a void blob to the security and
integrity modules. Some of them like evm then proceed to interpret the
void pointer and convert it into the kernel internal struct posix acl
representation to perform their integrity checking magic. This is
obviously pretty problematic as that requires knowledge that only the
vfs is guaranteed to have and has lead to various bugs. Add a proper
security hook for setting posix acls and pass down the posix acls in
their appropriate vfs format instead of hacking it through a void
pointer stored in the uapi format.
I spent considerate time in the security module and integrity
infrastructure and audited all codepaths. EVM is the only part that
really has restrictions based on the actual posix acl values passed
through it (e.g., i_mode). Before this dedicated hook EVM used to translate
from the uapi posix acl format sent to it in the form of a void pointer
into the vfs format. This is not a good thing. Instead of hacking around in
the uapi struct give EVM the posix acls in the appropriate vfs format and
perform sane permissions checks that mirror what it used to to in the
generic xattr hook.
IMA doesn't have any restrictions on posix acls. When posix acls are
changed it just wants to update its appraisal status to trigger an EVM
revalidation.
The removal of posix acls is equivalent to passing NULL to the posix set
acl hooks. This is the same as before through the generic xattr api.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
So far posix acls were passed as a void blob to the security and
integrity modules. Some of them like evm then proceed to interpret the
void pointer and convert it into the kernel internal struct posix acl
representation to perform their integrity checking magic. This is
obviously pretty problematic as that requires knowledge that only the
vfs is guaranteed to have and has lead to various bugs. Add a proper
security hook for setting posix acls and pass down the posix acls in
their appropriate vfs format instead of hacking it through a void
pointer stored in the uapi format.
In the next patches we implement the hooks for the few security modules
that do actually have restrictions on posix acls.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Introduce the LANDLOCK_ACCESS_FS_TRUNCATE flag for file truncation.
This flag hooks into the path_truncate, file_truncate and
file_alloc_security LSM hooks and covers file truncation using
truncate(2), ftruncate(2), open(2) with O_TRUNC, as well as creat().
This change also increments the Landlock ABI version, updates
corresponding selftests, and updates code documentation to document
the flag.
In security/security.c, allocate security blobs at pointer-aligned
offsets. This fixes the problem where one LSM's security blob can
shift another LSM's security blob to an unaligned address (reported
by Nathan Chancellor).
The following operations are restricted:
open(2): requires the LANDLOCK_ACCESS_FS_TRUNCATE right if a file gets
implicitly truncated as part of the open() (e.g. using O_TRUNC).
Notable special cases:
* open(..., O_RDONLY|O_TRUNC) can truncate files as well in Linux
* open() with O_TRUNC does *not* need the TRUNCATE right when it
creates a new file.
truncate(2) (on a path): requires the LANDLOCK_ACCESS_FS_TRUNCATE
right.
ftruncate(2) (on a file): requires that the file had the TRUNCATE
right when it was previously opened. File descriptors acquired by
other means than open(2) (e.g. memfd_create(2)) continue to support
truncation with ftruncate(2).
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Link: https://lore.kernel.org/r/20221018182216.301684-5-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Like path_truncate, the file_truncate hook also restricts file
truncation, but is called in the cases where truncation is attempted
on an already-opened file.
This is required in a subsequent commit to handle ftruncate()
operations differently to truncate() operations.
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20221018182216.301684-2-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
- Remove our now never-true definitions for pgd_huge() and p4d_leaf().
- Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.
- Add support for syscall wrappers.
- Add support for KFENCE on 64-bit.
- Update 64-bit HV KVM to use the new guest state entry/exit accounting API.
- Support execute-only memory when using the Radix MMU (P9 or later).
- Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.
- Updates to our linker script to move more data into read-only sections.
- Allow the VDSO to be randomised on 32-bit.
- Many other small features and fixes.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Christophe
Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas, Gaosheng Cui, Gustavo A. R. Silva,
Haren Myneni, Hari Bathini, Jilin Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Rohan McLure,
Russell Currey, Sachin Sant, Segher Boessenkool, Shrikanth Hegde, Tyrel Datwyler, Wolfram
Sang, ye xingchen, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----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=TFBA
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Remove our now never-true definitions for pgd_huge() and p4d_leaf().
- Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.
- Add support for syscall wrappers.
- Add support for KFENCE on 64-bit.
- Update 64-bit HV KVM to use the new guest state entry/exit accounting
API.
- Support execute-only memory when using the Radix MMU (P9 or later).
- Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.
- Updates to our linker script to move more data into read-only
sections.
- Allow the VDSO to be randomised on 32-bit.
- Many other small features and fixes.
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas,
Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin
Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent
Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali
Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool,
Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng
Yongjun.
* tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
KVM: PPC: Book3S HV: Fix stack frame regs marker
powerpc: Don't add __powerpc_ prefix to syscall entry points
powerpc/64s/interrupt: Fix stack frame regs marker
powerpc/64: Fix msr_check_and_set/clear MSR[EE] race
powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN
powerpc/pseries: Add firmware details to the hardware description
powerpc/powernv: Add opal details to the hardware description
powerpc: Add device-tree model to the hardware description
powerpc/64: Add logical PVR to the hardware description
powerpc: Add PVR & CPU name to hardware description
powerpc: Add hardware description string
powerpc/configs: Enable PPC_UV in powernv_defconfig
powerpc/configs: Update config files for removed/renamed symbols
powerpc/mm: Fix UBSAN warning reported on hugetlb
powerpc/mm: Always update max/min_low_pfn in mem_topology_setup()
powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range
powerpc: Drops STABS_DEBUG from linker scripts
powerpc/64s: Remove lost/old comment
powerpc/64s: Remove old STAB comment
powerpc: remove orphan systbl_chk.sh
...
-----BEGIN PGP SIGNATURE-----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=VZl5
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
"Seven patches for the LSM layer and we've got a mix of trivial and
significant patches. Highlights below, starting with the smaller bits
first so they don't get lost in the discussion of the larger items:
- Remove some redundant NULL pointer checks in the common LSM audit
code.
- Ratelimit the lockdown LSM's access denial messages.
With this change there is a chance that the last visible lockdown
message on the console is outdated/old, but it does help preserve
the initial series of lockdown denials that started the denial
message flood and my gut feeling is that these might be the more
valuable messages.
- Open userfaultfds as readonly instead of read/write.
While this code obviously lives outside the LSM, it does have a
noticeable impact on the LSMs with Ondrej explaining the situation
in the commit description. It is worth noting that this patch
languished on the VFS list for over a year without any comments
(objections or otherwise) so I took the liberty of pulling it into
the LSM tree after giving fair notice. It has been in linux-next
since the end of August without any noticeable problems.
- Add a LSM hook for user namespace creation, with implementations
for both the BPF LSM and SELinux.
Even though the changes are fairly small, this is the bulk of the
diffstat as we are also including BPF LSM selftests for the new
hook.
It's also the most contentious of the changes in this pull request
with Eric Biederman NACK'ing the LSM hook multiple times during its
development and discussion upstream. While I've never taken NACK's
lightly, I'm sending these patches to you because it is my belief
that they are of good quality, satisfy a long-standing need of
users and distros, and are in keeping with the existing nature of
the LSM layer and the Linux Kernel as a whole.
The patches in implement a LSM hook for user namespace creation
that allows for a granular approach, configurable at runtime, which
enables both monitoring and control of user namespaces. The general
consensus has been that this is far preferable to the other
solutions that have been adopted downstream including outright
removal from the kernel, disabling via system wide sysctls, or
various other out-of-tree mechanisms that users have been forced to
adopt since we haven't been able to provide them an upstream
solution for their requests. Eric has been steadfast in his
objections to this LSM hook, explaining that any restrictions on
the user namespace could have significant impact on userspace.
While there is the possibility of impacting userspace, it is
important to note that this solution only impacts userspace when it
is requested based on the runtime configuration supplied by the
distro/admin/user. Frederick (the pathset author), the LSM/security
community, and myself have tried to work with Eric during
development of this patchset to find a mutually acceptable
solution, but Eric's approach and unwillingness to engage in a
meaningful way have made this impossible. I have CC'd Eric directly
on this pull request so he has a chance to provide his side of the
story; there have been no objections outside of Eric's"
* tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: ratelimit denial messages
userfaultfd: open userfaultfds with O_RDONLY
selinux: Implement userns_create hook
selftests/bpf: Add tests verifying bpf lsm userns_create hook
bpf-lsm: Make bpf_lsm_userns_create() sleepable
security, lsm: Introduce security_create_user_ns()
lsm: clean up redundant NULL pointer check
The error injection facility on pseries VMs allows corruption of
arbitrary guest memory, potentially enabling a sufficiently privileged
user to disable lockdown or perform other modifications of the running
kernel via the rtas syscall.
Block the PAPR error injection facility from being opened or called
when locked down.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926131643.146502-3-nathanl@linux.ibm.com
The /proc/powerpc/ofdt interface allows the root user to freely alter
the in-kernel device tree, enabling arbitrary physical address writes
via drivers that could bind to malicious device nodes, thus making it
possible to disable lockdown.
Historically this interface has been used on the pseries platform to
facilitate the runtime addition and removal of processor, memory, and
device resources (aka Dynamic Logical Partitioning or DLPAR). Years
ago, the processor and memory use cases were migrated to designs that
happen to be lockdown-friendly: device tree updates are communicated
directly to the kernel from firmware without passing through untrusted
user space. I/O device DLPAR via the "drmgr" command in powerpc-utils
remains the sole legitimate user of /proc/powerpc/ofdt, but it is
already broken in lockdown since it uses /dev/mem to allocate argument
buffers for the rtas syscall. So only illegitimate uses of the
interface should see a behavior change when running on a locked down
kernel.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926131643.146502-2-nathanl@linux.ibm.com
cast of ->d_name.name to char * is completely wrong - nothing is
allowed to modify its contents.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
io-uring cmd support was added through ee692a21e9 ("fs,io_uring:
add infrastructure for uring-cmd"), this extended the struct
file_operations to allow a new command which each subsystem can use
to enable command passthrough. Add an LSM specific for the command
passthrough which enables LSMs to inspect the command details.
This was discussed long ago without no clear pointer for something
conclusive, so this enables LSMs to at least reject this new file
operation.
[0] https://lkml.kernel.org/r/8adf55db-7bab-f59d-d612-ed906b948d19@schaufler-ca.com
Cc: stable@vger.kernel.org
Fixes: ee692a21e9 ("fs,io_uring: add infrastructure for uring-cmd")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paul Moore <paul@paul-moore.com>
User namespaces are an effective tool to allow programs to run with
permission without requiring the need for a program to run as root. User
namespaces may also be used as a sandboxing technique. However, attackers
sometimes leverage user namespaces as an initial attack vector to perform
some exploit. [1,2,3]
While it is not the unprivileged user namespace functionality, which
causes the kernel to be exploitable, users/administrators might want to
more granularly limit or at least monitor how various processes use this
functionality, while vulnerable kernel subsystems are being patched.
Preventing user namespace already creation comes in a few of forms in
order of granularity:
1. /proc/sys/user/max_user_namespaces sysctl
2. Distro specific patch(es)
3. CONFIG_USER_NS
To block a task based on its attributes, the LSM hook cred_prepare is a
decent candidate for use because it provides more granular control, and
it is called before create_user_ns():
cred = prepare_creds()
security_prepare_creds()
call_int_hook(cred_prepare, ...
if (cred)
create_user_ns(cred)
Since security_prepare_creds() is meant for LSMs to copy and prepare
credentials, access control is an unintended use of the hook. [4]
Further, security_prepare_creds() will always return a ENOMEM if the
hook returns any non-zero error code.
This hook also does not handle the clone3 case which requires us to
access a user space pointer to know if we're in the CLONE_NEW_USER
call path which may be subject to a TOCTTOU attack.
Lastly, cred_prepare is called in many call paths, and a targeted hook
further limits the frequency of calls which is a beneficial outcome.
Therefore introduce a new function security_create_user_ns() with an
accompanying userns_create LSM hook.
With the new userns_create hook, users will have more control over the
observability and access control over user namespace creation. Users
should expect that normal operation of user namespaces will behave as
usual, and only be impacted when controls are implemented by users or
administrators.
This hook takes the prepared creds for LSM authors to write policy
against. On success, the new namespace is applied to credentials,
otherwise an error is returned.
Links:
1. https://nvd.nist.gov/vuln/detail/CVE-2022-0492
2. https://nvd.nist.gov/vuln/detail/CVE-2022-25636
3. https://nvd.nist.gov/vuln/detail/CVE-2022-34918
4. https://lore.kernel.org/all/1c4b1c0d-12f6-6e9e-a6a3-cdce7418110c@schaufler-ca.com/
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=ESR7
-----END PGP SIGNATURE-----
Merge tag 'safesetid-6.0' of https://github.com/micah-morton/linux
Pull SafeSetID updates from Micah Morton:
"This contains one commit that touches common kernel code, one that
adds functionality internal to the SafeSetID LSM code, and a few other
commits that only modify the SafeSetID LSM selftest.
The commit that touches common kernel code simply adds an LSM hook in
the setgroups() syscall that mirrors what is done for the existing LSM
hooks in the setuid() and setgid() syscalls. This commit combined with
the SafeSetID-specific one allow the LSM to filter setgroups() calls
according to configured rule sets in the same way that is already done
for setuid() and setgid()"
* tag 'safesetid-6.0' of https://github.com/micah-morton/linux:
LSM: SafeSetID: add setgroups() testing to selftest
LSM: SafeSetID: Add setgroups() security policy handling
security: Add LSM hook to setgroups() syscall
LSM: SafeSetID: add GID testing to selftest
LSM: SafeSetID: selftest cleanup and prepare for GIDs
LSM: SafeSetID: fix userns bug in selftest
Give the LSM framework the ability to filter setgroups() syscalls. There
are already analagous hooks for the set*uid() and set*gid() syscalls.
The SafeSetID LSM will use this new hook to ensure setgroups() calls are
allowed by the installed security policy. Tested by putting print
statement in security_task_fix_setgroups() hook and confirming that it
gets hit when userspace does a setgroups() syscall.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Adapt the security_inode_setattr() helper to pass down the mount's
idmapping to account for that change.
Link: https://lore.kernel.org/r/20220621141454.2914719-8-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Important changes:
* improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
* fix a too-restrictive filesystem control for a rare corner case;
* set the nested sandbox limitation to 16 layers;
* add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
* add new tests and documentation;
* format code with clang-format to make it easier to maintain and
contribute.
Related patch series:
* [PATCH v1 0/7] Landlock: Clean up coding style with clang-format
https://lore.kernel.org/r/20220506160513.523257-1-mic@digikod.net
* [PATCH v2 00/10] Minor Landlock fixes and new tests
https://lore.kernel.org/r/20220506160820.524344-1-mic@digikod.net
* [PATCH v3 00/12] Landlock: file linking and renaming support
https://lore.kernel.org/r/20220506161102.525323-1-mic@digikod.net
* [PATCH v2] landlock: Explain how to support Landlock
https://lore.kernel.org/r/20220513112743.156414-1-mic@digikod.net
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCYousmBAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSWToA/32m9xJhfppiTBHqw6Dt47v4sjuE/3ScwO/O
40rzaqs3AQD8AWHeqvPuM2lwPp1NQS4mcfv7K3DSCGBbUjHqdcl3Aw==
=+tJO
-----END PGP SIGNATURE-----
Merge tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock updates from Mickaël Salaün:
- improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
- fix a too-restrictive filesystem control for a rare corner case;
- set the nested sandbox limitation to 16 layers;
- add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
- add new tests and documentation;
- format code with clang-format to make it easier to maintain and
contribute.
* tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (30 commits)
landlock: Explain how to support Landlock
landlock: Add design choices documentation for filesystem access rights
landlock: Document good practices about filesystem policies
landlock: Document LANDLOCK_ACCESS_FS_REFER and ABI versioning
samples/landlock: Add support for file reparenting
selftests/landlock: Add 11 new test suites dedicated to file reparenting
landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER
LSM: Remove double path_rename hook calls for RENAME_EXCHANGE
landlock: Move filesystem helpers and add a new one
landlock: Fix same-layer rule unions
landlock: Create find_rule() from unmask_layers()
landlock: Reduce the maximum number of layers to 16
landlock: Define access_mask_t to enforce a consistent access mask size
selftests/landlock: Test landlock_create_ruleset(2) argument check ordering
landlock: Change landlock_restrict_self(2) check ordering
landlock: Change landlock_add_rule(2) argument check ordering
selftests/landlock: Add tests for O_PATH
selftests/landlock: Fully test file rename with "remove" access
selftests/landlock: Extend access right tests to directories
selftests/landlock: Add tests for unknown access rights
...
-----BEGIN PGP SIGNATURE-----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=1ZFj
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220523' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got twelve patches queued for v5.19, with most being fairly
minor. The highlights are below:
- The checkreqprot and runtime disable knobs have been deprecated for
some time with no active users that we can find. In an effort to
move things along we are adding a pause when the knobs are used to
help make the deprecation more noticeable in case anyone is still
using these hacks in the shadows.
- We've added the anonymous inode class name to the AVC audit records
when anonymous inodes are involved. This should make writing policy
easier when anonymous inodes are involved.
- More constification work. This is fairly straightforward and the
source of most of the diffstat.
- The usual minor cleanups: remove unnecessary assignments, assorted
style/checkpatch fixes, kdoc fixes, macro while-loop
encapsulations, #include tweaks, etc"
* tag 'selinux-pr-20220523' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
security: declare member holding string literal const
selinux: log anon inode class name
selinux: declare data arrays const
selinux: fix indentation level of mls_ops block
selinux: include necessary headers in headers
selinux: avoid extra semicolon
selinux: update parameter documentation
selinux: resolve checkpatch errors
selinux: don't sleep when CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE is true
selinux: checkreqprot is deprecated, add some ssleep() discomfort
selinux: runtime disable is deprecated, add some ssleep() discomfort
selinux: Remove redundant assignments
KGDB and KDB allow read and write access to kernel memory, and thus
should be restricted during lockdown. An attacker with access to a
serial port (for example, via a hypervisor console, which some cloud
vendors provide over the network) could trigger the debugger so it is
important that the debugger respect the lockdown mode when/if it is
triggered.
Fix this by integrating lockdown into kdb's existing permissions
mechanism. Unfortunately kgdb does not have any permissions mechanism
(although it certainly could be added later) so, for now, kgdb is simply
and brutally disabled by immediately exiting the gdb stub without taking
any action.
For lockdowns established early in the boot (e.g. the normal case) then
this should be fine but on systems where kgdb has set breakpoints before
the lockdown is enacted than "bad things" will happen.
CVE: CVE-2022-21499
Co-developed-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to be able to identify a file exchange with renameat2(2) and
RENAME_EXCHANGE, which will be useful for Landlock [1], propagate the
rename flags to LSMs. This may also improve performance because of the
switch from two set of LSM hook calls to only one, and because LSMs
using this hook may optimize the double check (e.g. only one lock,
reduce the number of path walks).
AppArmor, Landlock and Tomoyo are updated to leverage this change. This
should not change the current behavior (same check order), except
(different level of) speed boosts.
[1] https://lore.kernel.org/r/20220221212522.320243-1-mic@digikod.net
Cc: James Morris <jmorris@namei.org>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Serge E. Hallyn <serge@hallyn.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506161102.525323-7-mic@digikod.net
The struct security_hook_list member lsm is assigned in
security_add_hooks() with string literals passed from the individual
security modules. Declare the function parameter and the struct member
const to signal their immutability.
Reported by Clang [-Wwrite-strings]:
security/selinux/hooks.c:7388:63: error: passing 'const char [8]'
to parameter of type 'char *' discards qualifiers
[-Werror,-Wincompatible-pointer-types-discards-qualifiers]
security_add_hooks(selinux_hooks,
ARRAY_SIZE(selinux_hooks), selinux);
^~~~~~~~~
./include/linux/lsm_hooks.h:1629:11: note: passing argument to
parameter 'lsm' here
char *lsm);
^
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The initialization of "security_hook_heads" is done by casting it to
another structure pointer type, and treating it as an array of "struct
hlist_head" objects. This requires an exception be made in "randstruct",
because otherwise it will emit an error, reducing the effectiveness of
the hardening technique.
Instead of using a cast, initialize the individual struct hlist_head
elements in security_hook_heads explicitly. This removes the need for
the cast and randstruct exception.
Signed-off-by: Bill Wendling <morbo@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220407175930.471870-1-morbo@google.com
-----BEGIN PGP SIGNATURE-----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=5E1v
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got a number of SELinux patches queued up, the highlights are:
- Fixup the security_fs_context_parse_param() LSM hook so it executes
all of the LSM hook implementations unless a serious error occurs.
We also correct the SELinux hook implementation so that it returns
zero on success.
- In addition to a few SELinux mount option parsing fixes, we
simplified the parsing by moving it earlier in the process.
The logic was that it was unlikely an admin/user would use the new
mount API and not have the policy loaded before passing the SELinux
options.
- Properly fixed the LSM/SELinux/SCTP hooks with the addition of the
security_sctp_assoc_established() hook.
This work was done in conjunction with the netdev folks and should
complete the move of the SCTP labeling from the endpoints to the
associations.
- Fixed a variety of sparse warnings caused by changes in the "__rcu"
markings of some core kernel structures.
- Ensure we access the superblock's LSM security blob using the
stacking-safe accessors.
- Added the ability for the kernel to always allow FIOCLEX and
FIONCLEX if the "ioctl_skip_cloexec" policy capability is
specified.
- Various constifications improvements, type casting improvements,
additional return value checks, and dead code/parameter removal.
- Documentation fixes"
* tag 'selinux-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (23 commits)
selinux: shorten the policy capability enum names
docs: fix 'make htmldocs' warning in SCTP.rst
selinux: allow FIOCLEX and FIONCLEX with policy capability
selinux: use correct type for context length
selinux: drop return statement at end of void functions
security: implement sctp_assoc_established hook in selinux
security: add sctp_assoc_established hook
selinux: parse contexts for mount options early
selinux: various sparse fixes
selinux: try to use preparsed sid before calling parse_sid()
selinux: Fix selinux_sb_mnt_opts_compat()
LSM: general protection fault in legacy_parse_param
selinux: fix a type cast problem in cred_init_security()
selinux: drop unused macro
selinux: simplify cred_init_security
selinux: do not discard const qualifier in cast
selinux: drop unused parameter of avtab_insert_node
selinux: drop cast to same type
selinux: enclose macro arguments in parenthesis
selinux: declare name parameter of hash_eval const
...
security_sctp_assoc_established() is added to replace
security_inet_conn_established() called in
sctp_sf_do_5_1E_ca(), so that asoc can be accessed in security
subsystem and save the peer secid to asoc->peer_secid.
Fixes: 72e89f5008 ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Based-on-patch-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
A ceph user has reported that ceph is crashing with kernel NULL pointer
dereference. Following is the backtrace.
/proc/version: Linux version 5.16.2-arch1-1 (linux@archlinux) (gcc (GCC)
11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Thu, 20 Jan 2022
16:18:29 +0000
distro / arch: Arch Linux / x86_64
SELinux is not enabled
ceph cluster version: 16.2.7 (dd0603118f56ab514f133c8d2e3adfc983942503)
relevant dmesg output:
[ 30.947129] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ 30.947206] #PF: supervisor read access in kernel mode
[ 30.947258] #PF: error_code(0x0000) - not-present page
[ 30.947310] PGD 0 P4D 0
[ 30.947342] Oops: 0000 [#1] PREEMPT SMP PTI
[ 30.947388] CPU: 5 PID: 778 Comm: touch Not tainted 5.16.2-arch1-1 #1
86fbf2c313cc37a553d65deb81d98e9dcc2a3659
[ 30.947486] Hardware name: Gigabyte Technology Co., Ltd. B365M
DS3H/B365M DS3H, BIOS F5 08/13/2019
[ 30.947569] RIP: 0010:strlen+0x0/0x20
[ 30.947616] Code: b6 07 38 d0 74 16 48 83 c7 01 84 c0 74 05 48 39 f7 75
ec 31 c0 31 d2 89 d6 89 d7 c3 48 89 f8 31 d2 89 d6 89 d7 c3 0
f 1f 40 00 <80> 3f 00 74 12 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 31
ff
[ 30.947782] RSP: 0018:ffffa4ed80ffbbb8 EFLAGS: 00010246
[ 30.947836] RAX: 0000000000000000 RBX: ffffa4ed80ffbc60 RCX:
0000000000000000
[ 30.947904] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
0000000000000000
[ 30.947971] RBP: ffff94b0d15c0ae0 R08: 0000000000000000 R09:
0000000000000000
[ 30.948040] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 30.948106] R13: 0000000000000001 R14: ffffa4ed80ffbc60 R15:
0000000000000000
[ 30.948174] FS: 00007fc7520f0740(0000) GS:ffff94b7ced40000(0000)
knlGS:0000000000000000
[ 30.948252] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 30.948308] CR2: 0000000000000000 CR3: 0000000104a40001 CR4:
00000000003706e0
[ 30.948376] Call Trace:
[ 30.948404] <TASK>
[ 30.948431] ceph_security_init_secctx+0x7b/0x240 [ceph
49f9c4b9bf5be8760f19f1747e26da33920bce4b]
[ 30.948582] ceph_atomic_open+0x51e/0x8a0 [ceph
49f9c4b9bf5be8760f19f1747e26da33920bce4b]
[ 30.948708] ? get_cached_acl+0x4d/0xa0
[ 30.948759] path_openat+0x60d/0x1030
[ 30.948809] do_filp_open+0xa5/0x150
[ 30.948859] do_sys_openat2+0xc4/0x190
[ 30.948904] __x64_sys_openat+0x53/0xa0
[ 30.948948] do_syscall_64+0x5c/0x90
[ 30.948989] ? exc_page_fault+0x72/0x180
[ 30.949034] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 30.949091] RIP: 0033:0x7fc7521e25bb
[ 30.950849] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00
00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 0
0 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 54 24 28 64 48 2b 14
25
Core of the problem is that ceph checks for return code from
security_dentry_init_security() and if return code is 0, it assumes
everything is fine and continues to call strlen(name), which crashes.
Typically SELinux LSM returns 0 and sets name to "security.selinux" and
it is not a problem. Or if selinux is not compiled in or disabled, it
returns -EOPNOTSUP and ceph deals with it.
But somehow in this configuration, 0 is being returned and "name" is
not being initialized and that's creating the problem.
Our suspicion is that BPF LSM is registering a hook for
dentry_init_security() and returns hook default of 0.
LSM_HOOK(int, 0, dentry_init_security, struct dentry *dentry,...)
I have not been able to reproduce it just by doing CONFIG_BPF_LSM=y.
Stephen has tested the patch though and confirms it solves the problem
for him.
dentry_init_security() is written in such a way that it expects only one
LSM to register the hook. Atleast that's the expectation with current code.
If another LSM returns a hook and returns default, it will simply return
0 as of now and that will break ceph.
Hence, suggestion is that change semantics of this hook a bit. If there
are no LSMs or no LSM is taking ownership and initializing security context,
then return -EOPNOTSUP. Also allow at max one LSM to initialize security
context. This hook can't deal with multiple LSMs trying to init security
context. This patch implements this new behavior.
Reported-by: Stephen Muth <smuth4@gmail.com>
Tested-by: Stephen Muth <smuth4@gmail.com>
Suggested-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: <stable@vger.kernel.org> # 5.16.0
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
The usual LSM hook "bail on fail" scheme doesn't work for cases where
a security module may return an error code indicating that it does not
recognize an input. In this particular case Smack sees a mount option
that it recognizes, and returns 0. A call to a BPF hook follows, which
returns -ENOPARAM, which confuses the caller because Smack has processed
its data.
The SELinux hook incorrectly returns 1 on success. There was a time
when this was correct, however the current expectation is that it
return 0 on success. This is repaired.
Reported-by: syzbot+d1e3b1d92d25abf97943@syzkaller.appspotmail.com
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Its last user has been removed in commit f2aedb713c ("NFS: Add
fs_context support.").
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The security_task_getsecid_subj() LSM hook invites misuse by allowing
callers to specify a task even though the hook is only safe when the
current task is referenced. Fix this by removing the task_struct
argument to the hook, requiring LSM implementations to use the
current task. While we are changing the hook declaration we also
rename the function to security_current_getsecid_subj() in an effort
to reinforce that the hook captures the subjective credentials of the
current task and not an arbitrary task on the system.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch reverts two prior patches, e7310c9402
("security: implement sctp_assoc_established hook in selinux") and
7c2ef0240e ("security: add sctp_assoc_established hook"), which
create the security_sctp_assoc_established() LSM hook and provide a
SELinux implementation. Unfortunately these two patches were merged
without proper review (the Reviewed-by and Tested-by tags from
Richard Haines were for previous revisions of these patches that
were significantly different) and there are outstanding objections
from the SELinux maintainers regarding these patches.
Work is currently ongoing to correct the problems identified in the
reverted patches, as well as others that have come up during review,
but it is unclear at this point in time when that work will be ready
for inclusion in the mainline kernel. In the interest of not keeping
objectionable code in the kernel for multiple weeks, and potentially
a kernel release, we are reverting the two problematic patches.
Signed-off-by: Paul Moore <paul@paul-moore.com>
security_sctp_assoc_established() is added to replace
security_inet_conn_established() called in
sctp_sf_do_5_1E_ca(), so that asoc can be accessed in security
subsystem and save the peer secid to asoc->peer_secid.
v1->v2:
- fix the return value of security_sctp_assoc_established() in
security.h, found by kernel test robot and Ondrej.
Fixes: 72e89f5008 ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Reviewed-by: Richard Haines <richard_c_haines@btinternet.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to move secid and peer_secid from endpoint to association,
and pass asoc to sctp_assoc_request and sctp_sk_clone instead of ep. As
ep is the local endpoint and asoc represents a connection, and in SCTP
one sk/ep could have multiple asoc/connection, saving secid/peer_secid
for new asoc will overwrite the old asoc's.
Note that since asoc can be passed as NULL, security_sctp_assoc_request()
is moved to the place right after the new_asoc is created in
sctp_sf_do_5_1B_init() and sctp_sf_do_unexpected_init().
v1->v2:
- fix the description of selinux_netlbl_skbuff_setsid(), as Jakub noticed.
- fix the annotation in selinux_sctp_assoc_request(), as Richard Noticed.
Fixes: 72e89f5008 ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Reviewed-by: Richard Haines <richard_c_haines@btinternet.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now security_dentry_init_security() only supports single security
label and is used by SELinux only. There are two users of this hook,
namely ceph and nfs.
NFS does not care about xattr name. Ceph hardcodes the xattr name to
security.selinux (XATTR_NAME_SELINUX).
I am making changes to fuse/virtiofs to send security label to virtiofsd
and I need to send xattr name as well. I also hardcoded the name of
xattr to security.selinux.
Stephen Smalley suggested that it probably is a good idea to modify
security_dentry_init_security() to also return name of xattr so that
we can avoid this hardcoding in the callers.
This patch adds a new parameter "const char **xattr_name" to
security_dentry_init_security() and LSM puts the name of xattr
too if caller asked for it (xattr_name != NULL).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
[PM: fixed typos in the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since binder was integrated with selinux, it has passed
'struct task_struct' associated with the binder_proc
to represent the source and target of transactions.
The conversion of task to SID was then done in the hook
implementations. It turns out that there are race conditions
which can result in an incorrect security context being used.
Fix by using the 'struct cred' saved during binder_open and pass
it to the selinux subsystem.
Cc: stable@vger.kernel.org # 5.14 (need backport for earlier stables)
Fixes: 79af73079d ("Add security hooks to binder and implement the hooks for SELinux.")
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Building with W=1 shows many unused const variable warnings. These can
be silenced, as we're well aware of their being potentially unused:
./include/linux/lsm_hook_defs.h:36:18: error: 'ptrace_access_check_default' defined but not used [-Werror=unused-const-variable=]
36 | LSM_HOOK(int, 0, ptrace_access_check, struct task_struct *child,
| ^~~~~~~~~~~~~~~~~~~
security/security.c:706:32: note: in definition of macro 'LSM_RET_DEFAULT'
706 | #define LSM_RET_DEFAULT(NAME) (NAME##_default)
| ^~~~
security/security.c:711:9: note: in expansion of macro 'DECLARE_LSM_RET_DEFAULT_int'
711 | DECLARE_LSM_RET_DEFAULT_##RET(DEFAULT, NAME)
| ^~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/lsm_hook_defs.h:36:1: note: in expansion of macro 'LSM_HOOK'
36 | LSM_HOOK(int, 0, ptrace_access_check, struct task_struct *child,
| ^~~~~~~~
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: linux-security-module@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-mm/202110131608.zms53FPR-lkp@intel.com/
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
A full expalantion of io_uring is beyond the scope of this commit
description, but in summary it is an asynchronous I/O mechanism
which allows for I/O requests and the resulting data to be queued
in memory mapped "rings" which are shared between the kernel and
userspace. Optionally, io_uring offers the ability for applications
to spawn kernel threads to dequeue I/O requests from the ring and
submit the requests in the kernel, helping to minimize the syscall
overhead. Rings are accessed in userspace by memory mapping a file
descriptor provided by the io_uring_setup(2), and can be shared
between applications as one might do with any open file descriptor.
Finally, process credentials can be registered with a given ring
and any process with access to that ring can submit I/O requests
using any of the registered credentials.
While the io_uring functionality is widely recognized as offering a
vastly improved, and high performing asynchronous I/O mechanism, its
ability to allow processes to submit I/O requests with credentials
other than its own presents a challenge to LSMs. When a process
creates a new io_uring ring the ring's credentials are inhertied
from the calling process; if this ring is shared with another
process operating with different credentials there is the potential
to bypass the LSMs security policy. Similarly, registering
credentials with a given ring allows any process with access to that
ring to submit I/O requests with those credentials.
In an effort to allow LSMs to apply security policy to io_uring I/O
operations, this patch adds two new LSM hooks. These hooks, in
conjunction with the LSM anonymous inode support previously
submitted, allow an LSM to apply access control policy to the
sharing of io_uring rings as well as any io_uring credential changes
requested by a process.
The new LSM hooks are described below:
* int security_uring_override_creds(cred)
Controls if the current task, executing an io_uring operation,
is allowed to override it's credentials with @cred. In cases
where the current task is a user application, the current
credentials will be those of the user application. In cases
where the current task is a kernel thread servicing io_uring
requests the current credentials will be those of the io_uring
ring (inherited from the process that created the ring).
* int security_uring_sqpoll(void)
Controls if the current task is allowed to create an io_uring
polling thread (IORING_SETUP_SQPOLL). Without a SQPOLL thread
in the kernel processes must submit I/O requests via
io_uring_enter(2) which allows us to compare any requested
credential changes against the application making the request.
With a SQPOLL thread, we can no longer compare requested
credential changes against the application making the request,
the comparison is made against the ring's credentials.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Back then, commit 96ae522795 ("bpf: Add bpf_probe_write_user BPF helper
to be called in tracers") added the bpf_probe_write_user() helper in order
to allow to override user space memory. Its original goal was to have a
facility to "debug, divert, and manipulate execution of semi-cooperative
processes" under CAP_SYS_ADMIN. Write to kernel was explicitly disallowed
since it would otherwise tamper with its integrity.
One use case was shown in cf9b1199de ("samples/bpf: Add test/example of
using bpf_probe_write_user bpf helper") where the program DNATs traffic
at the time of connect(2) syscall, meaning, it rewrites the arguments to
a syscall while they're still in userspace, and before the syscall has a
chance to copy the argument into kernel space. These days we have better
mechanisms in BPF for achieving the same (e.g. for load-balancers), but
without having to write to userspace memory.
Of course the bpf_probe_write_user() helper can also be used to abuse
many other things for both good or bad purpose. Outside of BPF, there is
a similar mechanism for ptrace(2) such as PTRACE_PEEK{TEXT,DATA} and
PTRACE_POKE{TEXT,DATA}, but would likely require some more effort.
Commit 96ae522795 explicitly dedicated the helper for experimentation
purpose only. Thus, move the helper's availability behind a newly added
LOCKDOWN_BPF_WRITE_USER lockdown knob so that the helper is disabled under
the "integrity" mode. More fine-grained control can be implemented also
from LSM side with this change.
Fixes: 96ae522795 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Rename LOCKDOWN_BPF_READ into LOCKDOWN_BPF_READ_KERNEL so we have naming
more consistent with a LOCKDOWN_BPF_WRITE_USER option that we are adding.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tmak
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
- The slow_avc_audit() function is now non-blocking so we can remove
the AVC_NONBLOCKING tricks; this also includes the 'flags' variant of
avc_has_perm().
- Use kmemdup() instead of kcalloc()+copy when copying parts of the
SELinux policydb.
- The InfiniBand device name is now passed by reference when possible
in the SELinux code, removing a strncpy().
- Minor cleanups including: constification of avtab function args,
removal of useless LSM/XFRM function args, SELinux kdoc fixes, and
removal of redundant assignments.
* tag 'selinux-pr-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: kill 'flags' argument in avc_has_perm_flags() and avc_audit()
selinux: slow_avc_audit has become non-blocking
selinux: Fix kernel-doc
selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC
lsm_audit,selinux: pass IB device name by reference
selinux: Remove redundant assignment to rc
selinux: Corrected comment to match kernel-doc comment
selinux: delete selinux_xfrm_policy_lookup() useless argument
selinux: constify some avtab function arguments
selinux: simplify duplicate_policydb_cond_list() by using kmemdup()
In preparation for 'evm: Allow setxattr() and setattr() for unmodified
metadata', this patch passes mnt_userns to the inode set/remove xattr hooks
so that the GID of the inode on an idmapped mount is correctly determined
by posix_acl_update_mode().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
seliunx_xfrm_policy_lookup() is hooks of security_xfrm_policy_lookup().
The dir argument is uselss in security_xfrm_policy_lookup(). So
remove the dir argument from selinux_xfrm_policy_lookup() and
security_xfrm_policy_lookup().
Signed-off-by: Zhongjun Tan <tanzhongjun@yulong.com>
[PM: reformat the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=uCN4
-----END PGP SIGNATURE-----
Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
The sb_delete security hook is called when shutting down a superblock,
which may be useful to release kernel objects tied to the superblock's
lifetime (e.g. inodes).
This new hook is needed by Landlock to release (ephemerally) tagged
struct inodes. This comes from the unprivileged nature of Landlock
described in the next commit.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-7-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Move management of the superblock->sb_security blob out of the
individual security modules and into the security infrastructure.
Instead of allocating the blobs from within the modules, the modules
tell the infrastructure how much space is required, and the space is
allocated there.
Cc: John Johansen <john.johansen@canonical.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-6-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
Of the three LSMs that implement the security_task_getsecid() LSM
hook, all three LSMs provide the task's objective security
credentials. This turns out to be unfortunate as most of the hook's
callers seem to expect the task's subjective credentials, although
a small handful of callers do correctly expect the objective
credentials.
This patch is the first step towards fixing the problem: it splits
the existing security_task_getsecid() hook into two variants, one
for the subjective creds, one for the objective creds.
void security_task_getsecid_subj(struct task_struct *p,
u32 *secid);
void security_task_getsecid_obj(struct task_struct *p,
u32 *secid);
While this patch does fix all of the callers to use the correct
variant, in order to keep this patch focused on the callers and to
ease review, the LSMs continue to use the same implementation for
both hooks. The net effect is that this patch should not change
the behavior of the kernel in any way, it will be up to the latter
LSM specific patches in this series to change the hook
implementations and return the correct credentials.
Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new hook that takes an existing super block and a new mount
with new options and determines if new options confict with an
existing mount or not.
A filesystem can use this new hook to determine if it can share
the an existing superblock with a new superblock for the new mount.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
[PM: tweak the subject line, fix tab/space problems]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
When interacting with user namespace and non-user namespace aware
filesystem capabilities the vfs will perform various security checks to
determine whether or not the filesystem capabilities can be used by the
caller, whether they need to be removed and so on. The main
infrastructure for this resides in the capability codepaths but they are
called through the LSM security infrastructure even though they are not
technically an LSM or optional. This extends the existing security hooks
security_inode_removexattr(), security_inode_killpriv(),
security_inode_getsecurity() to pass down the mount's user namespace and
makes them aware of idmapped mounts.
In order to actually get filesystem capabilities from disk the
capability infrastructure exposes the get_vfs_caps_from_disk() helper.
For user namespace aware filesystem capabilities a root uid is stored
alongside the capabilities.
In order to determine whether the caller can make use of the filesystem
capability or whether it needs to be ignored it is translated according
to the superblock's user namespace. If it can be translated to uid 0
according to that id mapping the caller can use the filesystem
capabilities stored on disk. If we are accessing the inode that holds
the filesystem capabilities through an idmapped mount we map the root
uid according to the mount's user namespace. Afterwards the checks are
identical to non-idmapped mounts: reading filesystem caps from disk
enforces that the root uid associated with the filesystem capability
must have a mapping in the superblock's user namespace and that the
caller is either in the same user namespace or is a descendant of the
superblock's user namespace. For filesystems that are mountable inside
user namespace the caller can just mount the filesystem and won't
usually need to idmap it. If they do want to idmap it they can create an
idmapped mount and mark it with a user namespace they created and which
is thus a descendant of s_user_ns. For filesystems that are not
mountable inside user namespaces the descendant rule is trivially true
because the s_user_ns will be the initial user namespace.
If the initial user namespace is passed nothing changes so non-idmapped
mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-11-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
This change adds a new LSM hook, inode_init_security_anon(), that will
be used while creating secure anonymous inodes. The hook allows/denies
its creation and assigns a security context to the inode.
The new hook accepts an optional context_inode parameter that callers
can use to provide additional contextual information to security modules
for granting/denying permission to create an anon-inode of the same type.
This context_inode's security_context can also be used to initialize the
newly created anon-inode's security_context.
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=6Cqb
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"While we have a small number of SELinux patches for v5.11, there are a
few changes worth highlighting:
- Change the LSM network hooks to pass flowi_common structs instead
of the parent flowi struct as the LSMs do not currently need the
full flowi struct and they do not have enough information to use it
safely (missing information on the address family).
This patch was discussed both with Herbert Xu (representing team
netdev) and James Morris (representing team
LSMs-other-than-SELinux).
- Fix how we handle errors in inode_doinit_with_dentry() so that we
attempt to properly label the inode on following lookups instead of
continuing to treat it as unlabeled.
- Tweak the kernel logic around allowx, auditallowx, and dontauditx
SELinux policy statements such that the auditx/dontauditx are
effective even without the allowx statement.
Everything passes our test suite"
* tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
selinux: Fix fall-through warnings for Clang
selinux: drop super_block backpointer from superblock_security_struct
selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
selinux: allow dontauditx and auditallowx rules to take effect without allowx
selinux: fix error initialization in inode_doinit_with_dentry()
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-12-12
Just one patch this time:
1) Redact the SA keys with kernel lockdown confidentiality.
If enabled, no secret keys are sent to uuserspace.
From Antony Antony.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: redact SA secret with lockdown confidentiality
====================
Link: https://lore.kernel.org/r/20201212085737.2101294-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A followup change to tcp_request_sock_op would have to drop the 'const'
qualifier from the 'route_req' function as the
'security_inet_conn_request' call is moved there - and that function
expects a 'struct sock *'.
However, it turns out its also possible to add a const qualifier to
security_inet_conn_request instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
redact XFRM SA secret in the netlink response to xfrm_get_sa()
or dumpall sa.
Enable lockdown, confidentiality mode, at boot or at run time.
e.g. when enabled:
cat /sys/kernel/security/lockdown
none integrity [confidentiality]
ip xfrm state
src 172.16.1.200 dst 172.16.1.100
proto esp spi 0x00000002 reqid 2 mode tunnel
replay-window 0
aead rfc4106(gcm(aes)) 0x0000000000000000000000000000000000000000 96
note: the aead secret is redacted.
Redacting secret is also a FIPS 140-2 requirement.
v1->v2
- add size checks before memset calls
v2->v3
- replace spaces with tabs for consistency
v3->v4
- use kernel lockdown instead of a /proc setting
v4->v5
- remove kconfig option
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
As pointed out by Herbert in a recent related patch, the LSM hooks do
not have the necessary address family information to use the flowi
struct safely. As none of the LSMs currently use any of the protocol
specific flowi information, replace the flowi pointers with pointers
to the address family independent flowi_common struct.
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
As with the kernel_load_data LSM hook, add a "contents" flag to the
kernel_read_file LSM hook that indicates whether the LSM can expect
a matching call to the kernel_post_read_file LSM hook with the full
contents of the file. With the coming addition of partial file read
support for kernel_read_file*() API, the LSM will no longer be able
to always see the entire contents of a file during the read calls.
For cases where the LSM must read examine the complete file contents,
it will need to do so on its own every time the kernel_read_file
hook is called with contents=false (or reject such cases). Adjust all
existing LSMs to retain existing behavior.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-12-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few places in the kernel where LSMs would like to have
visibility into the contents of a kernel buffer that has been loaded or
read. While security_kernel_post_read_file() (which includes the
buffer) exists as a pairing for security_kernel_read_file(), no such
hook exists to pair with security_kernel_load_data().
Earlier proposals for just using security_kernel_post_read_file() with a
NULL file argument were rejected (i.e. "file" should always be valid for
the security_..._file hooks, but it appears at least one case was
left in the kernel during earlier refactoring. (This will be fixed in
a subsequent patch.)
Since not all cases of security_kernel_load_data() can have a single
contiguous buffer made available to the LSM hook (e.g. kexec image
segments are separately loaded), there needs to be a way for the LSM to
reason about its expectations of the hook coverage. In order to handle
this, add a "contents" argument to the "kernel_load_data" hook that
indicates if the newly added "kernel_post_load_data" hook will be called
with the full contents once loaded. That way, LSMs requiring full contents
can choose to unilaterally reject "kernel_load_data" with contents=false
(which is effectively the existing hook coverage), but when contents=true
they can allow it and later evaluate the "kernel_post_load_data" hook
once the buffer is loaded.
With this change, LSMs can gain coverage over non-file-backed data loads
(e.g. init_module(2) and firmware userspace helper), which will happen
in subsequent patches.
Additionally prepare IMA to start processing these cases.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-9-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move kernel_read_file* out of linux/fs.h to its own linux/kernel_read_file.h
include file. That header gets pulled in just about everywhere
and doesn't really need functions not related to the general fs interface.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200706232309.12010-2-scott.branden@broadcom.com
Link: https://lore.kernel.org/r/20201002173828.2099543-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
inode_copy_up_xattr returns 0 to indicate the acceptance of the xattr
and 1 to reject it. If the LSM does not know about the xattr, it's
expected to return -EOPNOTSUPP, which is the correct default value for
this hook. BPF LSM, currently, uses 0 as the default value and thereby
falsely allows all overlay fs xattributes to be copied up.
The iteration logic is also updated from the "bail-on-fail"
call_int_hook to continue on the non-decisive -EOPNOTSUPP and bail out
on other values.
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: James Morris <jmorris@namei.org>
SafeSetID is capable of making allow/deny decisions for set*uid calls
on a system, and we want to add similar functionality for set*gid
calls. The work to do that is not yet complete, so probably won't make
it in for v5.8, but we are looking to get this simple patch in for
v5.8 since we have it ready. We are planning on the rest of the work
for extending the SafeSetID LSM being merged during the v5.9 merge
window.
This patch was sent to the security mailing list and there were no objections.
-----BEGIN PGP SIGNATURE-----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=I+0L
-----END PGP SIGNATURE-----
Merge tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux
Pull SafeSetID update from Micah Morton:
"Add additional LSM hooks for SafeSetID
SafeSetID is capable of making allow/deny decisions for set*uid calls
on a system, and we want to add similar functionality for set*gid
calls.
The work to do that is not yet complete, so probably won't make it in
for v5.8, but we are looking to get this simple patch in for v5.8
since we have it ready.
We are planning on the rest of the work for extending the SafeSetID
LSM being merged during the v5.9 merge window"
* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
security: Add LSM hooks to set*gid syscalls
The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
-----BEGIN PGP SIGNATURE-----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=YTGf
-----END PGP SIGNATURE-----
Merge tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull notification queue from David Howells:
"This adds a general notification queue concept and adds an event
source for keys/keyrings, such as linking and unlinking keys and
changing their attributes.
Thanks to Debarshi Ray, we do have a pull request to use this to fix a
problem with gnome-online-accounts - as mentioned last time:
https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47
Without this, g-o-a has to constantly poll a keyring-based kerberos
cache to find out if kinit has changed anything.
[ There are other notification pending: mount/sb fsinfo notifications
for libmount that Karel Zak and Ian Kent have been working on, and
Christian Brauner would like to use them in lxc, but let's see how
this one works first ]
LSM hooks are included:
- A set of hooks are provided that allow an LSM to rule on whether or
not a watch may be set. Each of these hooks takes a different
"watched object" parameter, so they're not really shareable. The
LSM should use current's credentials. [Wanted by SELinux & Smack]
- A hook is provided to allow an LSM to rule on whether or not a
particular message may be posted to a particular queue. This is
given the credentials from the event generator (which may be the
system) and the watch setter. [Wanted by Smack]
I've provided SELinux and Smack with implementations of some of these
hooks.
WHY
===
Key/keyring notifications are desirable because if you have your
kerberos tickets in a file/directory, your Gnome desktop will monitor
that using something like fanotify and tell you if your credentials
cache changes.
However, we also have the ability to cache your kerberos tickets in
the session, user or persistent keyring so that it isn't left around
on disk across a reboot or logout. Keyrings, however, cannot currently
be monitored asynchronously, so the desktop has to poll for it - not
so good on a laptop. This facility will allow the desktop to avoid the
need to poll.
DESIGN DECISIONS
================
- The notification queue is built on top of a standard pipe. Messages
are effectively spliced in. The pipe is opened with a special flag:
pipe2(fds, O_NOTIFICATION_PIPE);
The special flag has the same value as O_EXCL (which doesn't seem
like it will ever be applicable in this context)[?]. It is given up
front to make it a lot easier to prohibit splice&co from accessing
the pipe.
[?] Should this be done some other way? I'd rather not use up a new
O_* flag if I can avoid it - should I add a pipe3() system call
instead?
The pipe is then configured::
ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);
Messages are then read out of the pipe using read().
- It should be possible to allow write() to insert data into the
notification pipes too, but this is currently disabled as the
kernel has to be able to insert messages into the pipe *without*
holding pipe->mutex and the code to make this work needs careful
auditing.
- sendfile(), splice() and vmsplice() are disabled on notification
pipes because of the pipe->mutex issue and also because they
sometimes want to revert what they just did - but one or more
notification messages might've been interleaved in the ring.
- The kernel inserts messages with the wait queue spinlock held. This
means that pipe_read() and pipe_write() have to take the spinlock
to update the queue pointers.
- Records in the buffer are binary, typed and have a length so that
they can be of varying size.
This allows multiple heterogeneous sources to share a common
buffer; there are 16 million types available, of which I've used
just a few, so there is scope for others to be used. Tags may be
specified when a watchpoint is created to help distinguish the
sources.
- Records are filterable as types have up to 256 subtypes that can be
individually filtered. Other filtration is also available.
- Notification pipes don't interfere with each other; each may be
bound to a different set of watches. Any particular notification
will be copied to all the queues that are currently watching for it
- and only those that are watching for it.
- When recording a notification, the kernel will not sleep, but will
rather mark a queue as having lost a message if there's
insufficient space. read() will fabricate a loss notification
message at an appropriate point later.
- The notification pipe is created and then watchpoints are attached
to it, using one of:
keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
watch_mount(AT_FDCWD, "/", 0, fd, 0x02);
watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03);
where in both cases, fd indicates the queue and the number after is
a tag between 0 and 255.
- Watches are removed if either the notification pipe is destroyed or
the watched object is destroyed. In the latter case, a message will
be generated indicating the enforced watch removal.
Things I want to avoid:
- Introducing features that make the core VFS dependent on the
network stack or networking namespaces (ie. usage of netlink).
- Dumping all this stuff into dmesg and having a daemon that sits
there parsing the output and distributing it as this then puts the
responsibility for security into userspace and makes handling
namespaces tricky. Further, dmesg might not exist or might be
inaccessible inside a container.
- Letting users see events they shouldn't be able to see.
TESTING AND MANPAGES
====================
- The keyutils tree has a pipe-watch branch that has keyctl commands
for making use of notifications. Proposed manual pages can also be
found on this branch, though a couple of them really need to go to
the main manpages repository instead.
If the kernel supports the watching of keys, then running "make
test" on that branch will cause the testing infrastructure to spawn
a monitoring process on the side that monitors a notifications pipe
for all the key/keyring changes induced by the tests and they'll
all be checked off to make sure they happened.
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch
- A test program is provided (samples/watch_queue/watch_test) that
can be used to monitor for keyrings, mount and superblock events.
Information on the notifications is simply logged to stdout"
* tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
smack: Implement the watch_key and post_notification hooks
selinux: Implement the watch_key security hook
keys: Make the KEY_NEED_* perms an enum rather than a mask
pipe: Add notification lossage handling
pipe: Allow buffers to be marked read-whole-or-error for notifications
Add sample notification program
watch_queue: Add a key/keyring notification facility
security: Add hooks to rule on setting a watch
pipe: Add general notification queue support
pipe: Add O_NOTIFICATION_PIPE
security: Add a hook for the point of notification insertion
uapi: General notification queue definitions
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXt9klAAKCRDh3BK/laaZ
PBeeAP9GRI0yajPzBzz2ZK9KkDc6A7wPiaAec+86Q+c02VncVwEAvq5Pi4um5RTZ
7SVv56ggKO3Cqx779zVyZTRYDs3+YA4=
=bpKI
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"Fixes:
- Resolve mount option conflicts consistently
- Sync before remount R/O
- Fix file handle encoding corner cases
- Fix metacopy related issues
- Fix an unintialized return value
- Add missing permission checks for underlying layers
Optimizations:
- Allow multipe whiteouts to share an inode
- Optimize small writes by inheriting SB_NOSEC from upper layer
- Do not call ->syncfs() multiple times for sync(2)
- Do not cache negative lookups on upper layer
- Make private internal mounts longterm"
* tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (27 commits)
ovl: remove unnecessary lock check
ovl: make oip->index bool
ovl: only pass ->ki_flags to ovl_iocb_to_rwf()
ovl: make private mounts longterm
ovl: get rid of redundant members in struct ovl_fs
ovl: add accessor for ofs->upper_mnt
ovl: initialize error in ovl_copy_xattr
ovl: drop negative dentry in upper layer
ovl: check permission to open real file
ovl: call secutiry hook in ovl_real_ioctl()
ovl: verify permissions in ovl_path_open()
ovl: switch to mounter creds in readdir
ovl: pass correct flags for opening real directory
ovl: fix redirect traversal on metacopy dentries
ovl: initialize OVL_UPPERDATA in ovl_lookup()
ovl: use only uppermetacopy state in ovl_lookup()
ovl: simplify setting of origin for index lookup
ovl: fix out of bounds access warning in ovl_check_fb_len()
ovl: return required buffer size for file handles
ovl: sync dirty data when remounting to ro mode
...
-----BEGIN PGP SIGNATURE-----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=G3xj
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"The main changes are extending the TPM 2.0 PCR banks with bank
specific file hashes, calculating the "boot_aggregate" based on other
TPM PCR banks, using the default IMA hash algorithm, instead of SHA1,
as the basis for the cache hash table key, and preventing the mprotect
syscall to circumvent an IMA mmap appraise policy rule.
- In preparation for extending TPM 2.0 PCR banks with bank specific
digests, commit 0b6cf6b97b ("tpm: pass an array of
tpm_extend_digest structures to tpm_pcr_extend()") modified
tpm_pcr_extend(). The original SHA1 file digests were
padded/truncated, before being extended into the other TPM PCR
banks. This pull request calculates and extends the TPM PCR banks
with bank specific file hashes completing the above change.
- The "boot_aggregate", the first IMA measurement list record, is the
"trusted boot" link between the pre-boot environment and the
running OS. With TPM 2.0, the "boot_aggregate" record is not
limited to being based on the SHA1 TPM PCR bank, but can be
calculated based on any enabled bank, assuming the hash algorithm
is also enabled in the kernel.
Other changes include the following and five other bug fixes/code
clean up:
- supporting both a SHA1 and a larger "boot_aggregate" digest in a
custom template format containing both the the SHA1 ('d') and
larger digests ('d-ng') fields.
- Initial hash table key fix, but additional changes would be good"
* tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()
ima: Directly assign the ima_default_policy pointer to ima_rules
ima: verify mprotect change is consistent with mmap policy
evm: Fix possible memory leak in evm_calc_hmac_or_hash()
ima: Set again build_ima_appraise variable
ima: Remove redundant policy rule set in add_rules()
ima: Fix ima digest hash table key calculation
ima: Use ima_hash_algo for collision detection in the measurement list
ima: Calculate and extend PCR with digests in ima_template_entry
ima: Allocate and initialize tfm for each PCR bank
ima: Switch to dynamically allocated buffer for template digests
ima: Store template digest directly in ima_template_entry
ima: Evaluate error in init_ima()
ima: Switch to ima_hash_algo for boot aggregate
Pull execve updates from Eric Biederman:
"Last cycle for the Nth time I ran into bugs and quality of
implementation issues related to exec that could not be easily be
fixed because of the way exec is implemented. So I have been digging
into exec and cleanup up what I can.
I don't think I have exec sorted out enough to fix the issues I
started with but I have made some headway this cycle with 4 sets of
changes.
- promised cleanups after introducing exec_update_mutex
- trivial cleanups for exec
- control flow simplifications
- remove the recomputation of bprm->cred
The net result is code that is a bit easier to understand and work
with and a decrease in the number of lines of code (if you don't count
the added tests)"
* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (24 commits)
exec: Compute file based creds only once
exec: Add a per bprm->file version of per_clear
binfmt_elf_fdpic: fix execfd build regression
selftests/exec: Add binfmt_script regression test
exec: Remove recursion from search_binary_handler
exec: Generic execfd support
exec/binfmt_script: Don't modify bprm->buf and then return -ENOEXEC
exec: Move the call of prepare_binprm into search_binary_handler
exec: Allow load_misc_binary to call prepare_binprm unconditionally
exec: Convert security_bprm_set_creds into security_bprm_repopulate_creds
exec: Factor security_bprm_creds_for_exec out of security_bprm_set_creds
exec: Teach prepare_exec_creds how exec treats uids & gids
exec: Set the point of no return sooner
exec: Move handling of the point of no return to the top level
exec: Run sync_mm_rss before taking exec_update_mutex
exec: Fix spelling of search_binary_handler in a comment
exec: Move the comment from above de_thread to above unshare_sighand
exec: Rename flush_old_exec begin_new_exec
exec: Move most of setup_new_exec into flush_old_exec
exec: In setup_new_exec cache current in the local variable me
...
Verify LSM permissions for underlying file, since vfs_ioctl() doesn't do
it.
[Stephen Rothwell] export security_file_ioctl
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move the computation of creds from prepare_binfmt into begin_new_exec
so that the creds need only be computed once. This is just code
reorganization no semantic changes of any kind are made.
Moving the computation is safe. I have looked through the kernel and
verified none of the binfmts look at bprm->cred directly, and that
there are no helpers that look at bprm->cred indirectly. Which means
that it is not a problem to compute the bprm->cred later in the
execution flow as it is not used until it becomes current->cred.
A new function bprm_creds_from_file is added to contain the work that
needs to be done. bprm_creds_from_file first computes which file
bprm->executable or most likely bprm->file that the bprm->creds
will be computed from.
The funciton bprm_fill_uid is updated to receive the file instead of
accessing bprm->file. The now unnecessary work needed to reset the
bprm->cred->euid, and bprm->cred->egid is removed from brpm_fill_uid.
A small comment to document that bprm_fill_uid now only deals with the
work to handle suid and sgid files. The default case is already
heandled by prepare_exec_creds.
The function security_bprm_repopulate_creds is renamed
security_bprm_creds_from_file and now is explicitly passed the file
from which to compute the creds. The documentation of the
bprm_creds_from_file security hook is updated to explain when the hook
is called and what it needs to do. The file is passed from
cap_bprm_creds_from_file into get_file_caps so that the caps are
computed for the appropriate file. The now unnecessary work in
cap_bprm_creds_from_file to reset the ambient capabilites has been
removed. A small comment to document that the work of
cap_bprm_creds_from_file is to read capabilities from the files
secureity attribute and derive capabilities from the fact the
user had uid 0 has been added.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Files can be mmap'ed read/write and later changed to execute to circumvent
IMA's mmap appraise policy rules. Due to locking issues (mmap semaphore
would be taken prior to i_mutex), files can not be measured or appraised at
this point. Eliminate this integrity gap, by denying the mprotect
PROT_EXECUTE change, if an mmap appraise policy rule exists.
On mprotect change success, return 0. On failure, return -EACESS.
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Rename bprm->cap_elevated to bprm->active_secureexec and initialize it
in prepare_binprm instead of in cap_bprm_set_creds. Initializing
bprm->active_secureexec in prepare_binprm allows multiple
implementations of security_bprm_repopulate_creds to play nicely with
each other.
Rename security_bprm_set_creds to security_bprm_reopulate_creds to
emphasize that this path recomputes part of bprm->cred. This
recomputation avoids the time of check vs time of use problems that
are inherent in unix #! interpreters.
In short two renames and a move in the location of initializing
bprm->active_secureexec.
Link: https://lkml.kernel.org/r/87o8qkzrxp.fsf_-_@x220.int.ebiederm.org
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
secid_to_secctx is not stackable, and since the BPF LSM registers this
hook by default, the call_int_hook logic is not suitable which
"bails-on-fail" and casues issues when other LSMs register this hook and
eventually breaks Audit.
In order to fix this, directly iterate over the security hooks instead
of using call_int_hook as suggested in:
https: //lore.kernel.org/bpf/9d0eb6c6-803a-ff3a-5603-9ad6d9edfc00@schaufler-ca.com/#t
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Fixes: 625236ba38 ("security: Fix the default value of secid_to_secctx hook")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/bpf/20200520125616.193765-1-kpsingh@chromium.org
Today security_bprm_set_creds has several implementations:
apparmor_bprm_set_creds, cap_bprm_set_creds, selinux_bprm_set_creds,
smack_bprm_set_creds, and tomoyo_bprm_set_creds.
Except for cap_bprm_set_creds they all test bprm->called_set_creds and
return immediately if it is true. The function cap_bprm_set_creds
ignores bprm->calld_sed_creds entirely.
Create a new LSM hook security_bprm_creds_for_exec that is called just
before prepare_binprm in __do_execve_file, resulting in a LSM hook
that is called exactly once for the entire of exec. Modify the bits
of security_bprm_set_creds that only want to be called once per exec
into security_bprm_creds_for_exec, leaving only cap_bprm_set_creds
behind.
Remove bprm->called_set_creds all of it's former users have been moved
to security_bprm_creds_for_exec.
Add or upate comments a appropriate to bring them up to date and
to reflect this change.
Link: https://lkml.kernel.org/r/87v9kszrzh.fsf_-_@x220.int.ebiederm.org
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com> # For the LSM and Smack bits
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Since the meaning of combining the KEY_NEED_* constants is undefined, make
it so that you can't do that by turning them into an enum.
The enum is also given some extra values to represent special
circumstances, such as:
(1) The '0' value is reserved and causes a warning to trap the parameter
being unset.
(2) The key is to be unlinked and we require no permissions on it, only
the keyring, (this replaces the KEY_LOOKUP_FOR_UNLINK flag).
(3) An override due to CAP_SYS_ADMIN.
(4) An override due to an instantiation token being present.
(5) The permissions check is being deferred to later key_permission()
calls.
The extra values give the opportunity for LSMs to audit these situations.
[Note: This really needs overhauling so that lookup_user_key() tells
key_task_permission() and the LSM what operation is being done and leaves
it to those functions to decide how to map that onto the available
permits. However, I don't really want to make these change in the middle
of the notifications patchset.]
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
cc: Paul Moore <paul@paul-moore.com>
cc: Stephen Smalley <stephen.smalley.work@gmail.com>
cc: Casey Schaufler <casey@schaufler-ca.com>
cc: keyrings@vger.kernel.org
cc: selinux@vger.kernel.org
Add security hooks that will allow an LSM to rule on whether or not a watch
may be set. More than one hook is required as the watches watch different
types of object.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
cc: Casey Schaufler <casey@schaufler-ca.com>
cc: Stephen Smalley <sds@tycho.nsa.gov>
cc: linux-security-module@vger.kernel.org
Add a security hook that allows an LSM to rule on whether a notification
message is allowed to be inserted into a particular watch queue.
The hook is given the following information:
(1) The credentials of the triggerer (which may be init_cred for a system
notification, eg. a hardware error).
(2) The credentials of the whoever set the watch.
(3) The notification message.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
cc: Casey Schaufler <casey@schaufler-ca.com>
cc: Stephen Smalley <sds@tycho.nsa.gov>
cc: linux-security-module@vger.kernel.org
The information about the different types of LSM hooks is scattered
in two locations i.e. union security_list_options and
struct security_hook_heads. Rather than duplicating this information
even further for BPF_PROG_TYPE_LSM, define all the hooks with the
LSM_HOOK macro in lsm_hook_defs.h which is then used to generate all
the data structures required by the LSM framework.
The LSM hooks are defined as:
LSM_HOOK(<return_type>, <default_value>, <hook_name>, args...)
with <default_value> acccessible in security.c as:
LSM_RET_DEFAULT(<hook_name>)
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Florent Revest <revest@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/bpf/20200329004356.27286-3-kpsingh@chromium.org
Pull security subsystem update from James Morris:
"Just one minor fix this time"
* 'for-v5.6' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-security:
security: remove EARLY_LSM_COUNT which never used
This macro is never used from it was introduced in commit e6b1db98cf
("security: Support early LSMs"), better to remove it.
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: James Morris <jmorris@namei.org>
Implement a SELinux hook for lockdown. If the lockdown module is also
enabled, then a denial by the lockdown module will take precedence over
SELinux, so SELinux can only further restrict lockdown decisions.
The SELinux hook only distinguishes at the granularity of integrity
versus confidentiality similar to the lockdown module, but includes the
full lockdown reason as part of the audit record as a hint in diagnosing
what triggered the denial. To support this auditing, move the
lockdown_reasons[] string array from being private to the lockdown
module to the security framework so that it can be used by the lsm audit
code and so that it is always available even when the lockdown module
is disabled.
Note that the SELinux implementation allows the integrity and
confidentiality reasons to be controlled independently from one another.
Thus, in an SELinux policy, one could allow operations that specify
an integrity reason while blocking operations that specify a
confidentiality reason. The SELinux hook implementation is
stricter than the lockdown module in validating the provided reason value.
Sample AVC audit output from denials:
avc: denied { integrity } for pid=3402 comm="fwupd"
lockdown_reason="/dev/mem,kmem,port" scontext=system_u:system_r:fwupd_t:s0
tcontext=system_u:system_r:fwupd_t:s0 tclass=lockdown permissive=0
avc: denied { confidentiality } for pid=4628 comm="cp"
lockdown_reason="/proc/kcore access"
scontext=unconfined_u:unconfined_r:test_lockdown_integrity_t:s0-s0:c0.c1023
tcontext=unconfined_u:unconfined_r:test_lockdown_integrity_t:s0-s0:c0.c1023
tclass=lockdown permissive=0
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
[PM: some merge fuzz do the the perf hooks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
In current mainline, the degree of access to perf_event_open(2) system
call depends on the perf_event_paranoid sysctl. This has a number of
limitations:
1. The sysctl is only a single value. Many types of accesses are controlled
based on the single value thus making the control very limited and
coarse grained.
2. The sysctl is global, so if the sysctl is changed, then that means
all processes get access to perf_event_open(2) opening the door to
security issues.
This patch adds LSM and SELinux access checking which will be used in
Android to access perf_event_open(2) for the purposes of attaching BPF
programs to tracepoints, perf profiling and other operations from
userspace. These operations are intended for production systems.
5 new LSM hooks are added:
1. perf_event_open: This controls access during the perf_event_open(2)
syscall itself. The hook is called from all the places that the
perf_event_paranoid sysctl is checked to keep it consistent with the
systctl. The hook gets passed a 'type' argument which controls CPU,
kernel and tracepoint accesses (in this context, CPU, kernel and
tracepoint have the same semantics as the perf_event_paranoid sysctl).
Additionally, I added an 'open' type which is similar to
perf_event_paranoid sysctl == 3 patch carried in Android and several other
distros but was rejected in mainline [1] in 2016.
2. perf_event_alloc: This allocates a new security object for the event
which stores the current SID within the event. It will be useful when
the perf event's FD is passed through IPC to another process which may
try to read the FD. Appropriate security checks will limit access.
3. perf_event_free: Called when the event is closed.
4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event.
5. perf_event_write: Called from the ioctl(2) syscalls for the event.
[1] https://lwn.net/Articles/696240/
Since Peter had suggest LSM hooks in 2016 [1], I am adding his
Suggested-by tag below.
To use this patch, we set the perf_event_paranoid sysctl to -1 and then
apply selinux checking as appropriate (default deny everything, and then
add policy rules to give access to domains that need it). In the future
we can remove the perf_event_paranoid sysctl altogether.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: James Morris <jmorris@namei.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: rostedt@goodmis.org
Cc: Yonghong Song <yhs@fb.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: jeffv@google.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: primiano@google.com
Cc: Song Liu <songliubraving@fb.com>
Cc: rsavitski@google.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Matthew Garrett <matthewgarrett@google.com>
Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit 9d1f8be5cf ("bpf: Restrict bpf
when kernel lockdown is in confidentiality mode") is missing a
Signed-off-by from its author. Matthew responded that he is providing
this under category (c) of the DCO"
* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
kexec: Fix file verification on S390
security: constify some arrays in lockdown LSM
lockdown: Print current->comm in restriction messages
efi: Restrict efivar_ssdt_load when the kernel is locked down
tracefs: Restrict tracefs when the kernel is locked down
debugfs: Restrict debugfs when the kernel is locked down
kexec: Allow kexec_file() with appropriate IMA policy when locked down
lockdown: Lock down perf when in confidentiality mode
bpf: Restrict bpf when kernel lockdown is in confidentiality mode
lockdown: Lock down tracing and perf kprobes when in confidentiality mode
lockdown: Lock down /proc/kcore
x86/mmiotrace: Lock down the testmmiotrace module
lockdown: Lock down module params that specify hardware parameters (eg. ioport)
lockdown: Lock down TIOCSSERIAL
lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
acpi: Disable ACPI table override if the kernel is locked down
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
ACPI: Limit access to custom_method when the kernel is locked down
x86/msr: Restrict MSR access when the kernel is locked down
x86: Lock down IO port access when the kernel is locked down
...
-----BEGIN PGP SIGNATURE-----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=n4ht
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add LSM hooks, and SELinux access control hooks, for dnotify,
fanotify, and inotify watches. This has been discussed with both the
LSM and fs/notify folks and everybody is good with these new hooks.
- The LSM stacking changes missed a few calls to current_security() in
the SELinux code; we fix those and remove current_security() for
good.
- Improve our network object labeling cache so that we always return
the object's label, even when under memory pressure. Previously we
would return an error if we couldn't allocate a new cache entry, now
we always return the label even if we can't create a new cache entry
for it.
- Convert the sidtab atomic_t counter to a normal u32 with
READ/WRITE_ONCE() and memory barrier protection.
- A few patches to policydb.c to clean things up (remove forward
declarations, long lines, bad variable names, etc)
* tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm: remove current_security()
selinux: fix residual uses of current_security() for the SELinux blob
selinux: avoid atomic_t usage in sidtab
fanotify, inotify, dnotify, security: add security hook for fs notifications
selinux: always return a secid from the network caches if we find one
selinux: policydb - rename type_val_to_struct_array
selinux: policydb - fix some checkpatch.pl warnings
selinux: shuffle around policydb.c to get rid of forward declarations
Add a mechanism to allow LSMs to make a policy decision around whether
kernel functionality that would allow tampering with or examining the
runtime state of the kernel should be permitted.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <jmorris@namei.org>
The lockdown module is intended to allow for kernels to be locked down
early in boot - sufficiently early that we don't have the ability to
kmalloc() yet. Add support for early initialisation of some LSMs, and
then add them to the list of names when we do full initialisation later.
Early LSMs are initialised in link order and cannot be overridden via
boot parameters, and cannot make use of kmalloc() (since the allocator
isn't initialised yet).
(Fixed by Stephen Rothwell to include a stub to fix builds when
!CONFIG_SECURITY)
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: James Morris <jmorris@namei.org>
As of now, setting watches on filesystem objects has, at most, applied a
check for read access to the inode, and in the case of fanotify, requires
CAP_SYS_ADMIN. No specific security hook or permission check has been
provided to control the setting of watches. Using any of inotify, dnotify,
or fanotify, it is possible to observe, not only write-like operations, but
even read access to a file. Modeling the watch as being merely a read from
the file is insufficient for the needs of SELinux. This is due to the fact
that read access should not necessarily imply access to information about
when another process reads from a file. Furthermore, fanotify watches grant
more power to an application in the form of permission events. While
notification events are solely, unidirectional (i.e. they only pass
information to the receiving application), permission events are blocking.
Permission events make a request to the receiving application which will
then reply with a decision as to whether or not that action may be
completed. This causes the issue of the watching application having the
ability to exercise control over the triggering process. Without drawing a
distinction within the permission check, the ability to read would imply
the greater ability to control an application. Additionally, mount and
superblock watches apply to all files within the same mount or superblock.
Read access to one file should not necessarily imply the ability to watch
all files accessed within a given mount or superblock.
In order to solve these issues, a new LSM hook is implemented and has been
placed within the system calls for marking filesystem objects with inotify,
fanotify, and dnotify watches. These calls to the hook are placed at the
point at which the target path has been resolved and are provided with the
path struct, the mask of requested notification events, and the type of
object on which the mark is being set (inode, superblock, or mount). The
mask and obj_type have already been translated into common FS_* values
shared by the entirety of the fs notification infrastructure. The path
struct is passed rather than just the inode so that the mount is available,
particularly for mount watches. This also allows for use of the hook by
pathname-based security modules. However, since the hook is intended for
use even by inode based security modules, it is not placed under the
CONFIG_SECURITY_PATH conditional. Otherwise, the inode-based security
modules would need to enable all of the path hooks, even though they do not
use any of them.
This only provides a hook at the point of setting a watch, and presumes
that permission to set a particular watch implies the ability to receive
all notification about that object which match the mask. This is all that
is required for SELinux. If other security modules require additional hooks
or infrastructure to control delivery of notification, these can be added
by them. It does not make sense for us to propose hooks for which we have
no implementation. The understanding that all notifications received by the
requesting application are all strictly of a type for which the application
has been granted permission shows that this implementation is sufficient in
its coverage.
Security modules wishing to provide complete control over fanotify must
also implement a security_file_open hook that validates that the access
requested by the watching application is authorized. Fanotify has the issue
that it returns a file descriptor with the file mode specified during
fanotify_init() to the watching process on event. This is already covered
by the LSM security_file_open hook if the security module implements
checking of the requested file mode there. Otherwise, a watching process
can obtain escalated access to a file for which it has not been authorized.
The selinux_path_notify hook implementation works by adding five new file
permissions: watch, watch_mount, watch_sb, watch_reads, and watch_with_perm
(descriptions about which will follow), and one new filesystem permission:
watch (which is applied to superblock checks). The hook then decides which
subset of these permissions must be held by the requesting application
based on the contents of the provided mask and the obj_type. The
selinux_file_open hook already checks the requested file mode and therefore
ensures that a watching process cannot escalate its access through
fanotify.
The watch, watch_mount, and watch_sb permissions are the baseline
permissions for setting a watch on an object and each are a requirement for
any watch to be set on a file, mount, or superblock respectively. It should
be noted that having either of the other two permissions (watch_reads and
watch_with_perm) does not imply the watch, watch_mount, or watch_sb
permission. Superblock watches further require the filesystem watch
permission to the superblock. As there is no labeled object in view for
mounts, there is no specific check for mount watches beyond watch_mount to
the inode. Such a check could be added in the future, if a suitable labeled
object existed representing the mount.
The watch_reads permission is required to receive notifications from
read-exclusive events on filesystem objects. These events include accessing
a file for the purpose of reading and closing a file which has been opened
read-only. This distinction has been drawn in order to provide a direct
indication in the policy for this otherwise not obvious capability. Read
access to a file should not necessarily imply the ability to observe read
events on a file.
Finally, watch_with_perm only applies to fanotify masks since it is the
only way to set a mask which allows for the blocking, permission event.
This permission is needed for any watch which is of this type. Though
fanotify requires CAP_SYS_ADMIN, this is insufficient as it gives implicit
trust to root, which we do not do, and does not support least privilege.
Signed-off-by: Aaron Goidel <acgoide@tycho.nsa.gov>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull integrity updates from Mimi Zohar:
"Bug fixes, code clean up, and new features:
- IMA policy rules can be defined in terms of LSM labels, making the
IMA policy dependent on LSM policy label changes, in particular LSM
label deletions. The new environment, in which IMA-appraisal is
being used, frequently updates the LSM policy and permits LSM label
deletions.
- Prevent an mmap'ed shared file opened for write from also being
mmap'ed execute. In the long term, making this and other similar
changes at the VFS layer would be preferable.
- The IMA per policy rule template format support is needed for a
couple of new/proposed features (eg. kexec boot command line
measurement, appended signatures, and VFS provided file hashes).
- Other than the "boot-aggregate" record in the IMA measuremeent
list, all other measurements are of file data. Measuring and
storing the kexec boot command line in the IMA measurement list is
the first buffer based measurement included in the measurement
list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Introduce struct evm_xattr
ima: Update MAX_TEMPLATE_NAME_LEN to fit largest reasonable definition
KEXEC: Call ima_kexec_cmdline to measure the boot command line args
IMA: Define a new template field buf
IMA: Define a new hook to measure the kexec boot command line arguments
IMA: support for per policy rule template formats
integrity: Fix __integrity_init_keyring() section mismatch
ima: Use designated initializers for struct ima_event_data
ima: use the lsm policy update notifier
LSM: switch to blocking policy update notifiers
x86/ima: fix the Kconfig dependency for IMA_ARCH_POLICY
ima: Make arch_policy_entry static
ima: prevent a file already mmap'ed write to be mmap'ed execute
x86/ima: check EFI SetupMode too
Atomic policy updaters are not very useful as they cannot
usually perform the policy updates on their own. Since it
seems that there is no strict need for the atomicity,
switch to the blocking variant. While doing so, rename
the functions accordingly.
Signed-off-by: Janne Karhunen <janne.karhunen@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull mount ABI updates from Al Viro:
"The syscalls themselves, finally.
That's not all there is to that stuff, but switching individual
filesystems to new methods is fortunately independent from everything
else, so e.g. NFS series can go through NFS tree, etc.
As those conversions get done, we'll be finally able to get rid of a
bunch of duplication in fs/super.c introduced in the beginning of the
entire thing. I expect that to be finished in the next window..."
* 'work.mount-syscalls' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Add a sample program for the new mount API
vfs: syscall: Add fspick() to select a superblock for reconfiguration
vfs: syscall: Add fsmount() to create a mount for a superblock
vfs: syscall: Add fsconfig() for configuring and managing a context
vfs: Implement logging through fs_context
vfs: syscall: Add fsopen() to prepare for superblock creation
Make anon_inodes unconditional
teach move_mount(2) to work with OPEN_TREE_CLONE
vfs: syscall: Add move_mount(2) to move mounts around
vfs: syscall: Add open_tree(2) to reference or clone a mount
This patch introduces a new security hook that is intended for
initializing the security data for newly created kernfs nodes, which
provide a way of storing a non-default security context, but need to
operate independently from mounts (and therefore may not have an
associated inode at the moment of creation).
The main motivation is to allow kernfs nodes to inherit the context of
the parent under SELinux, similar to the behavior of
security_inode_init_security(). Other LSMs may implement their own logic
for handling the creation of new nodes.
This patch also adds helper functions to <linux/kernfs.h> for
getting/setting security xattrs of a kernfs node so that LSMs hooks are
able to do their job. Other important attributes should be accessible
direcly in the kernfs_node fields (in case there is need for more, then
new helpers should be added to kernfs.h along with the patch that needs
them).
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: more manual merge fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a move_mount() system call that will move a mount from one place to
another and, in the next commit, allow to attach an unattached mount tree.
The new system call looks like the following:
int move_mount(int from_dfd, const char *from_path,
int to_dfd, const char *to_path,
unsigned int flags);
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-api@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull vfs mount infrastructure updates from Al Viro:
"The rest of core infrastructure; no new syscalls in that pile, but the
old parts are switched to new infrastructure. At that point
conversions of individual filesystems can happen independently; some
are done here (afs, cgroup, procfs, etc.), there's also a large series
outside of that pile dealing with NFS (quite a bit of option-parsing
stuff is getting used there - it's one of the most convoluted
filesystems in terms of mount-related logics), but NFS bits are the
next cycle fodder.
It got seriously simplified since the last cycle; documentation is
probably the weakest bit at the moment - I considered dropping the
commit introducing Documentation/filesystems/mount_api.txt (cutting
the size increase by quarter ;-), but decided that it would be better
to fix it up after -rc1 instead.
That pile allows to do followup work in independent branches, which
should make life much easier for the next cycle. fs/super.c size
increase is unpleasant; there's a followup series that allows to
shrink it considerably, but I decided to leave that until the next
cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
afs: Use fs_context to pass parameters over automount
afs: Add fs_context support
vfs: Add some logging to the core users of the fs_context log
vfs: Implement logging through fs_context
vfs: Provide documentation for new mount API
vfs: Remove kern_mount_data()
hugetlbfs: Convert to fs_context
cpuset: Use fs_context
kernfs, sysfs, cgroup, intel_rdt: Support fs_context
cgroup: store a reference to cgroup_ns into cgroup_fs_context
cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper
cgroup_do_mount(): massage calling conventions
cgroup: stash cgroup_root reference into cgroup_fs_context
cgroup2: switch to option-by-option parsing
cgroup1: switch to option-by-option parsing
cgroup: take options parsing into ->parse_monolithic()
cgroup: fold cgroup1_mount() into cgroup1_get_tree()
cgroup: start switching to fs_context
ipc: Convert mqueue fs to fs_context
proc: Add fs_context support to procfs
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlx+8ZgUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXOlDhAAiGlirQ9syyG2fYzaARZZ2QoU/GGD
PSAeiNmP3jvJzXArCvugRCw+YSNDdQOBM3SrLQC+cM0MAIDRYXN0NdcrsbTchlMA
51Fx1egZ9Fyj+Ehgida3muh2lRUy7DQwMCL6tAVqwz7vYkSTGDUf+MlYqOqXDka5
74pEExOS3Jdi7560BsE8b6QoW9JIJqEJnirXGkG9o2qC0oFHCR6PKxIyQ7TJrLR1
F23aFTqLTH1nbPUQjnox2PTf13iQVh4j2gwzd+9c9KBfxoGSge3dmxId7BJHy2aG
M27fPdCYTNZAGWpPVujsCPAh1WPQ9NQqg3mA9+g14PEbiLqPcqU+kWmnDU7T7bEw
Qx0kt6Y8GiknwCqq8pDbKYclgRmOjSGdfutzd0z8uDpbaeunS4/NqnDb/FUaDVcr
jA4d6ep7qEgHpYbL8KgOeZCexfaTfz6mcwRWNq3Uu9cLZbZqSSQ7PXolMADHvoRs
LS7VH2jcP7q4p4GWmdfjv67xyUUo9HG5HHX74h5pLfQSYXiBWo4ht0UOAzX/6EcE
CJNHAFHv+OanI5Rg/6JQ8b3/bJYxzAJVyLZpCuMtlKk6lYBGNeADk9BezEDIYsm8
tSe4/GqqyR9+Qz8rSdpAZ0KKkfqS535IcHUPUJau7Bzg1xqSEP5gzZN6QsjdXg0+
5wFFfdFICTfJFXo=
=57/1
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"A lucky 13 audit patches for v5.1.
Despite the rather large diffstat, most of the changes are from two
bug fix patches that move code from one Kconfig option to another.
Beyond that bit of churn, the remaining changes are largely cleanups
and bug-fixes as we slowly march towards container auditing. It isn't
all boring though, we do have a couple of new things: file
capabilities v3 support, and expanded support for filtering on
filesystems to solve problems with remote filesystems.
All changes pass the audit-testsuite. Please merge for v5.1"
* tag 'audit-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: mark expected switch fall-through
audit: hide auditsc_get_stamp and audit_serial prototypes
audit: join tty records to their syscall
audit: remove audit_context when CONFIG_ AUDIT and not AUDITSYSCALL
audit: remove unused actx param from audit_rule_match
audit: ignore fcaps on umount
audit: clean up AUDITSYSCALL prototypes and stubs
audit: more filter PATH records keyed on filesystem magic
audit: add support for fcaps v3
audit: move loginuid and sessionid from CONFIG_AUDITSYSCALL to CONFIG_AUDIT
audit: add syscall information to CONFIG_CHANGE records
audit: hand taken context to audit_kill_trees for syscall logging
audit: give a clue what CONFIG_CHANGE op was involved
new primitive: vfs_dup_fs_context(). Comes with fs_context
method (->dup()) for copying the filesystem-specific parts
of fs_context, along with LSM one (->fs_context_dup()) for
doing the same to LSM parts.
[needs better commit message, and change of Author:, anyway]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add LSM hooks for use by the new mount API and filesystem context code.
This includes:
(1) Hooks to handle allocation, duplication and freeing of the security
record attached to a filesystem context.
(2) A hook to snoop source specifications. There may be multiple of these
if the filesystem supports it. They will to be local files/devices if
fs_context::source_is_dev is true and will be something else, possibly
remote server specifications, if false.
(3) A hook to snoop superblock configuration options in key[=val] form.
If the LSM decides it wants to handle it, it can suppress the option
being passed to the filesystem. Note that 'val' may include commas
and binary data with the fsopen patch.
(4) A hook to perform validation and allocation after the configuration
has been done but before the superblock is allocated and set up.
(5) A hook to transfer the security from the context to a newly created
superblock.
(6) A hook to rule on whether a path point can be used as a mountpoint.
These are intended to replace:
security_sb_copy_data
security_sb_kern_mount
security_sb_mount
security_sb_set_mnt_opts
security_sb_clone_mnt_opts
security_sb_parse_opts_str
[AV -- some of the methods being replaced are already gone, some of the
methods are not added for the lack of need]
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-security-module@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
To avoid potential confusion, explicitly ignore "security=" when "lsm=" is
used on the command line, and report that it is happening.
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The audit_rule_match() struct audit_context *actx parameter is not used
by any in-tree consumers (selinux, apparmour, integrity, smack).
The audit context is an internal audit structure that should only be
accessed by audit accessor functions.
It was part of commit 03d37d25e0 ("LSM/Audit: Introduce generic
Audit LSM hooks") but appears to have never been used.
Remove it.
Please see the github issue
https://github.com/linux-audit/audit-kernel/issues/107
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: fixed the referenced commit title]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxFDv0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGBPsH/3Ij47fut8kwxGSX
Tmx7Y+VYftRiKSwK3+HxsCvde3scqfkxAukb3HeJDzZdpnouT0k4nqUYQabAANi/
MdaO+NSBRp/NjzZcpFG9QAroIQ2G2sRQ4E8ldFcNmdsjZWlUfKIHPfYHzvvc06L4
MhvdkpMa/p51Jz9egQs0kfSvrb6fh4OEDTI19/aaGR0oJBhoGhLrqTI+vdYhMiyO
wWtUXgZfsmlCBdAQLRh04CxGTc/32VApoB/SwP9sF+xD3gcL0mPFNKUociio6K2Y
a7u7yuzUKvVwuafVgX9QT+f+je5/5u+WFsG/26cfXzizZoNWW5oDl3sBD3hRNkvt
J13lB1w=
=ch+/
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc3' into next-general
Sync to Linux 5.0-rc3 to pull in the VFS changes which impacted a lot
of the LSM code.
Fixes the following sparse warnings:
security/security.c:533:5: warning:
symbol 'lsm_task_alloc' was not declared. Should it be static?
security/security.c:554:5: warning:
symbol 'lsm_ipc_alloc' was not declared. Should it be static?
security/security.c:575:5: warning:
symbol 'lsm_msg_msg_alloc' was not declared. Should it be static?
Fixes: f4ad8f2c40 ("LSM: Infrastructure management of the task security")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Since current->cred == current->real_cred when ordered_lsm_init()
is called, and lsm_early_cred()/lsm_early_task() need to be called
between the amount of required bytes is determined and module specific
initialization function is called, we can move these calls from
individual modules to ordered_lsm_init().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
From: Casey Schaufler <casey@schaufler-ca.com>
Check that the cred security blob has been set before trying
to clean it up. There is a case during credential initialization
that could result in this.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Reported-by: syzbot+69ca07954461f189e808@syzkaller.appspotmail.com
This patch provides a general mechanism for passing flags to the
security_capable LSM hook. It replaces the specific 'audit' flag that is
used to tell security_capable whether it should log an audit message for
the given capability check. The reason for generalizing this flag
passing is so we can add an additional flag that signifies whether
security_capable is being called by a setid syscall (which is needed by
the proposed SafeSetID LSM).
Signed-off-by: Micah Morton <mortonm@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Move management of the kern_ipc_perm->security and
msg_msg->security blobs out of the individual security
modules and into the security infrastructure. Instead
of allocating the blobs from within the modules the modules
tell the infrastructure how much space is required, and
the space is allocated there.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
Move management of the task_struct->security blob out
of the individual security modules and into the security
infrastructure. Instead of allocating the blobs from within
the modules the modules tell the infrastructure how much
space is required, and the space is allocated there.
The only user of this blob is AppArmor. The AppArmor use
is abstracted to avoid future conflict.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
Move management of the inode->i_security blob out
of the individual security modules and into the security
infrastructure. Instead of allocating the blobs from within
the modules the modules tell the infrastructure how much
space is required, and the space is allocated there.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
Move management of the file->f_security blob out of the
individual security modules and into the infrastructure.
The modules no longer allocate or free the data, instead
they tell the infrastructure how much space they require.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
Move management of the cred security blob out of the
security modules and into the security infrastructre.
Instead of allocating and freeing space the security
modules tell the infrastructure how much space they
require.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[kees: adjusted for ordered init series]
Signed-off-by: Kees Cook <keescook@chromium.org>
Back in 2007 I made what turned out to be a rather serious
mistake in the implementation of the Smack security module.
The SELinux module used an interface in /proc to manipulate
the security context on processes. Rather than use a similar
interface, I used the same interface. The AppArmor team did
likewise. Now /proc/.../attr/current will tell you the
security "context" of the process, but it will be different
depending on the security module you're using.
This patch provides a subdirectory in /proc/.../attr for
Smack. Smack user space can use the "current" file in
this subdirectory and never have to worry about getting
SELinux attributes by mistake. Programs that use the
old interface will continue to work (or fail, as the case
may be) as before.
The proposed S.A.R.A security module is dependent on
the mechanism to create its own attr subdirectory.
The original implementation is by Kees Cook.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
This converts capabilities to use the new LSM_ORDER_FIRST position.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
In preparation for distinguishing the "capability" LSM from other LSMs, it
must be ordered first. This introduces LSM_ORDER_MUTABLE for the general
LSMs and LSM_ORDER_FIRST for capability. In the future LSM_ORDER_LAST
for could be added for anything that must run last (e.g. Landlock may
use this).
Signed-off-by: Kees Cook <keescook@chromium.org>
This converts Yama from being a direct "minor" LSM into an ordered LSM.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
This converts LoadPin from being a direct "minor" LSM into an ordered LSM.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Since we already have to do a pass through the LSMs to figure out if
exclusive LSMs should be disabled after the first one is seen as enabled,
this splits the logic up a bit more cleanly. Now we do a full "prepare"
pass through the LSMs (which also allows for later use by the blob-sharing
code), before starting the LSM initialization pass.
Signed-off-by: Kees Cook <keescook@chromium.org>
This removes CONFIG_DEFAULT_SECURITY in favor of the explicit ordering
offered by CONFIG_LSM and adds all the exclusive LSMs to the ordered
LSM initialization. The old meaning of CONFIG_DEFAULT_SECURITY is now
captured by which exclusive LSM is listed first in the LSM order. All
LSMs not added to the ordered list are explicitly disabled.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
In order to both support old "security=" Legacy Major LSM selection, and
handling real exclusivity, this creates LSM_FLAG_EXCLUSIVE and updates
the selection logic to handle them.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
For what are marked as the Legacy Major LSMs, make them effectively
exclusive when selected on the "security=" boot parameter, to handle
the future case of when a previously major LSMs become non-exclusive
(e.g. when TOMOYO starts blob-sharing).
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
