Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov: - a driver for SGI IOC3 PS/2 controller - updates to driver for FocalTech FT5x06 series touch screen controllers - other assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - switch to reduced reporting mode dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema dt-bindings: touchscreen: Add touchscreen schema Input: add IOC3 serio driver Input: axp20x-pek - enable wakeup for all AXP variants Input: axp20x-pek - respect userspace wakeup configuration Input: ads7846 - use new `delay` structure for SPI transfer delays Input: edt-ft5x06 - use pm core to enable/disable the wake irq Input: edt-ft5x06 - make wakeup-source switchable Input: edt-ft5x06 - document wakeup-source capability Input: edt-ft5x06 - alphabetical include reorder Input: edt-ft5x06 - work around first register access error Input: apbps2 - add __iomem to register struct Input: axp20x-pek - make device attributes static Input: elants_i2c - check Remark ID when attempting firmware update
2024-11-26 05:34:13 +08:00 · 2020-02-03 22:05:15 +00:00 · 2020-02-03 22:05:15 +00:00 · fe70da5a32
commit fe70da5a32
parent d4e9056dae b19efcabb5
14 changed files with 544 additions and 144 deletions
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@ -36,6 +36,8 @@ Optional properties:
 - pinctrl-0:   a phandle pointing to the pin settings for the
                control gpios

+ - wakeup-source: If present the device will act as wakeup-source
+
 - threshold:   allows setting the "click"-threshold in the range
                from 0 to 80.

--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@ -1,50 +0,0 @@
-Device tree bindings for Goodix GT9xx series touchscreen controller
-
-Required properties:
-
- - compatible		: Should be "goodix,gt1151"
-				 or "goodix,gt5663"
-				 or "goodix,gt5688"
-				 or "goodix,gt911"
-				 or "goodix,gt9110"
-				 or "goodix,gt912"
-				 or "goodix,gt927"
-				 or "goodix,gt9271"
-				 or "goodix,gt928"
-				 or "goodix,gt967"
- - reg			: I2C address of the chip. Should be 0x5d or 0x14
- - interrupts		: Interrupt to which the chip is connected
-
-Optional properties:
-
- - irq-gpios		: GPIO pin used for IRQ. The driver uses the
-			  interrupt gpio pin as output to reset the device.
- - reset-gpios		: GPIO pin used for reset
- - AVDD28-supply	: Analog power supply regulator on AVDD28 pin
- - VDDIO-supply		: GPIO power supply regulator on VDDIO pin
- - touchscreen-inverted-x
- - touchscreen-inverted-y
- - touchscreen-size-x
- - touchscreen-size-y
- - touchscreen-swapped-x-y
-
-The touchscreen-* properties are documented in touchscreen.txt in this
-directory.
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		gt928@5d {
-			compatible = "goodix,gt928";
-			reg = <0x5d>;
-			interrupt-parent = <&gpio>;
-			interrupts = <0 0>;
-
-			irq-gpios = <&gpio1 0 0>;
-			reset-gpios = <&gpio1 1 0>;
-		};
-
-		/* ... */
-	};
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT9xx series touchscreen controller Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - goodix,gt1151
+      - goodix,gt5663
+      - goodix,gt5688
+      - goodix,gt911
+      - goodix,gt9110
+      - goodix,gt912
+      - goodix,gt927
+      - goodix,gt9271
+      - goodix,gt928
+      - goodix,gt967
+
+  reg:
+    enum: [ 0x5d, 0x14 ]
+
+  interrupts:
+    maxItems: 1
+
+  irq-gpios:
+    description: GPIO pin used for IRQ.
+                 The driver uses the interrupt gpio pin as
+                 output to reset the device.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  AVDD28-supply:
+    description: Analog power supply regulator on AVDD28 pin
+
+  VDDIO-supply:
+    description: GPIO power supply regulator on VDDIO pin
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+- |
+    i2c@00000000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      gt928@5d {
+        compatible = "goodix,gt928";
+        reg = <0x5d>;
+        interrupt-parent = <&gpio>;
+        interrupts = <0 0>;
+        irq-gpios = <&gpio1 0 0>;
+        reset-gpios = <&gpio1 1 0>;
+      };
+    };
+
+...
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@ -1,39 +1 @@
-General Touchscreen Properties:
-
-Optional properties for Touchscreens:
- - touchscreen-min-x		: minimum x coordinate reported (0 if not set)
- - touchscreen-min-y		: minimum y coordinate reported (0 if not set)
- - touchscreen-size-x		: horizontal resolution of touchscreen
-				  (maximum x coordinate reported + 1)
- - touchscreen-size-y		: vertical resolution of touchscreen
-				  (maximum y coordinate reported + 1)
- - touchscreen-max-pressure	: maximum reported pressure (arbitrary range
-				  dependent on the controller)
- - touchscreen-min-pressure	: minimum pressure on the touchscreen to be
-				  achieved in order for the touchscreen
-				  driver to report a touch event.
- - touchscreen-fuzz-x		: horizontal noise value of the absolute input
-				  device (in pixels)
- - touchscreen-fuzz-y		: vertical noise value of the absolute input
-				  device (in pixels)
- - touchscreen-fuzz-pressure	: pressure noise value of the absolute input
-				  device (arbitrary range dependent on the
-				  controller)
- - touchscreen-average-samples : Number of data samples which are averaged
-				  for each read (valid values dependent on the
-				  controller)
- - touchscreen-inverted-x	: X axis is inverted (boolean)
- - touchscreen-inverted-y	: Y axis is inverted (boolean)
- - touchscreen-swapped-x-y	: X and Y axis are swapped (boolean)
-				  Swapping is done after inverting the axis
- - touchscreen-x-mm		: horizontal length in mm of the touchscreen
- - touchscreen-y-mm		: vertical length in mm of the touchscreen
-
-Deprecated properties for Touchscreens:
- - x-size			: deprecated name for touchscreen-size-x
- - y-size			: deprecated name for touchscreen-size-y
- - moving-threshold		: deprecated name for a combination of
-				  touchscreen-fuzz-x and touchscreen-fuzz-y
- - contact-threshold		: deprecated name for touchscreen-fuzz-pressure
- - x-invert			: deprecated name for touchscreen-inverted-x
- - y-invert			: deprecated name for touchscreen-inverted-y
+See touchscreen.yaml
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common touchscreen Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+properties:
+  touchscreen-min-x:
+    description: minimum x coordinate reported
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  touchscreen-min-y:
+    description: minimum y coordinate reported
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  touchscreen-size-x:
+    description: horizontal resolution of touchscreen (maximum x coordinate reported + 1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-size-y:
+    description: vertical resolution of touchscreen (maximum y coordinate reported + 1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-max-pressure:
+    description: maximum reported pressure (arbitrary range dependent on the controller)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-min-pressure:
+    description: minimum pressure on the touchscreen to be achieved in order for the
+                 touchscreen driver to report a touch event.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-fuzz-x:
+    description: horizontal noise value of the absolute input device (in pixels)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-fuzz-y:
+    description: vertical noise value of the absolute input device (in pixels)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-fuzz-pressure:
+    description: pressure noise value of the absolute input device (arbitrary range
+                 dependent on the controller)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-average-samples:
+    description: Number of data samples which are averaged for each read (valid values
+                 dependent on the controller)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-inverted-x:
+    description: X axis is inverted
+    type: boolean
+
+  touchscreen-inverted-y:
+    description: Y axis is inverted
+    type: boolean
+
+  touchscreen-swapped-x-y:
+    description: X and Y axis are swapped
+                 Swapping is done after inverting the axis
+    type: boolean
+
+  touchscreen-x-mm:
+    description: horizontal length in mm of the touchscreen
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-y-mm:
+    description: vertical length in mm of the touchscreen
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+dependencies:
+  touchscreen-size-x: [ touchscreen-size-y ]
+  touchscreen-size-y: [ touchscreen-size-x ]
+  touchscreen-x-mm: [ touchscreen-y-mm ]
+  touchscreen-y-mm: [ touchscreen-x-mm ]
--- a/drivers/input/misc/axp20x-pek.c
+++ b/drivers/input/misc/axp20x-pek.c
@ -191,9 +191,10 @@ static ssize_t axp20x_store_attr_shutdown(struct device *dev,
 				 axp20x_pek->info->shutdown_mask, buf, count);
 }

-DEVICE_ATTR(startup, 0644, axp20x_show_attr_startup, axp20x_store_attr_startup);
-DEVICE_ATTR(shutdown, 0644, axp20x_show_attr_shutdown,
-	    axp20x_store_attr_shutdown);
+static DEVICE_ATTR(startup, 0644, axp20x_show_attr_startup,
+		   axp20x_store_attr_startup);
+static DEVICE_ATTR(shutdown, 0644, axp20x_show_attr_shutdown,
+		   axp20x_store_attr_shutdown);

 static struct attribute *axp20x_attrs[] = {
 	&dev_attr_startup.attr,
@ -279,8 +280,7 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
 		return error;
 	}

-	if (axp20x_pek->axp20x->variant == AXP288_ID)
-		enable_irq_wake(axp20x_pek->irq_dbr);
+	device_init_wakeup(&pdev->dev, true);

 	return 0;
 }
@ -352,6 +352,40 @@ static int axp20x_pek_probe(struct platform_device *pdev)
 	return 0;
 }

+static int __maybe_unused axp20x_pek_suspend(struct device *dev)
+{
+	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+
+	/*
+	 * As nested threaded IRQs are not automatically disabled during
+	 * suspend, we must explicitly disable non-wakeup IRQs.
+	 */
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(axp20x_pek->irq_dbf);
+		enable_irq_wake(axp20x_pek->irq_dbr);
+	} else {
+		disable_irq(axp20x_pek->irq_dbf);
+		disable_irq(axp20x_pek->irq_dbr);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused axp20x_pek_resume(struct device *dev)
+{
+	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		disable_irq_wake(axp20x_pek->irq_dbf);
+		disable_irq_wake(axp20x_pek->irq_dbr);
+	} else {
+		enable_irq(axp20x_pek->irq_dbf);
+		enable_irq(axp20x_pek->irq_dbr);
+	}
+
+	return 0;
+}
+
 static int __maybe_unused axp20x_pek_resume_noirq(struct device *dev)
 {
 	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
@ -371,6 +405,7 @@ static int __maybe_unused axp20x_pek_resume_noirq(struct device *dev)
 }

 static const struct dev_pm_ops axp20x_pek_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(axp20x_pek_suspend, axp20x_pek_resume)
 #ifdef CONFIG_PM_SLEEP
 	.resume_noirq = axp20x_pek_resume_noirq,
 #endif
--- a/drivers/input/rmi4/rmi_f11.c
+++ b/drivers/input/rmi4/rmi_f11.c
@ -412,6 +412,10 @@ struct f11_2d_sensor_queries {

 /* Defs for Ctrl0. */
 #define RMI_F11_REPORT_MODE_MASK        0x07
+#define RMI_F11_REPORT_MODE_CONTINUOUS  (0 << 0)
+#define RMI_F11_REPORT_MODE_REDUCED     (1 << 0)
+#define RMI_F11_REPORT_MODE_FS_CHANGE   (2 << 0)
+#define RMI_F11_REPORT_MODE_FP_CHANGE   (3 << 0)
 #define RMI_F11_ABS_POS_FILT            (1 << 3)
 #define RMI_F11_REL_POS_FILT            (1 << 4)
 #define RMI_F11_REL_BALLISTICS          (1 << 5)
@ -1195,6 +1199,16 @@ static int rmi_f11_initialize(struct rmi_function *fn)
 		ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD] =
 			sensor->axis_align.delta_y_threshold;

+	/*
+	 * If distance threshold values are set, switch to reduced reporting
+	 * mode so they actually get used by the controller.
+	 */
+	if (ctrl->ctrl0_11[RMI_F11_DELTA_X_THRESHOLD] ||
+	    ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD]) {
+		ctrl->ctrl0_11[0] &= ~RMI_F11_REPORT_MODE_MASK;
+		ctrl->ctrl0_11[0] |= RMI_F11_REPORT_MODE_REDUCED;
+	}
+
 	if (f11->sens_query.has_dribble) {
 		switch (sensor->dribble) {
 		case RMI_REG_STATE_OFF:
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@ -165,6 +165,16 @@ config SERIO_MACEPS2
 	  To compile this driver as a module, choose M here: the
 	  module will be called maceps2.

+config SERIO_SGI_IOC3
+	tristate "SGI IOC3 PS/2 controller"
+	depends on SGI_MFD_IOC3
+	help
+	  Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card
+	  and you want to attach and use a keyboard, mouse, or both.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ioc3kbd.
+
 config SERIO_LIBPS2
 	tristate "PS/2 driver library"
 	depends on SERIO_I8042 || SERIO_I8042=n
--- a/drivers/input/serio/Makefile
+++ b/drivers/input/serio/Makefile
@ -20,6 +20,7 @@ obj-$(CONFIG_HIL_MLC)		+= hp_sdc_mlc.o hil_mlc.o
 obj-$(CONFIG_SERIO_PCIPS2)	+= pcips2.o
 obj-$(CONFIG_SERIO_PS2MULT)	+= ps2mult.o
 obj-$(CONFIG_SERIO_MACEPS2)	+= maceps2.o
+obj-$(CONFIG_SERIO_SGI_IOC3)	+= ioc3kbd.o
 obj-$(CONFIG_SERIO_LIBPS2)	+= libps2.o
 obj-$(CONFIG_SERIO_RAW)		+= serio_raw.o
 obj-$(CONFIG_SERIO_AMS_DELTA)	+= ams_delta_serio.o
--- a/drivers/input/serio/apbps2.c
+++ b/drivers/input/serio/apbps2.c
@ -51,7 +51,7 @@ struct apbps2_regs {

 struct apbps2_priv {
 	struct serio		*io;
-	struct apbps2_regs	*regs;
+	struct apbps2_regs	__iomem *regs;
 };

 static int apbps2_idx;
--- a/drivers/input/serio/ioc3kbd.c
+++ b/drivers/input/serio/ioc3kbd.c
@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 PS/2 controller driver for linux
+ *
+ * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
+ *
+ * Based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
+ *               Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/sn/ioc3.h>
+
+struct ioc3kbd_data {
+	struct ioc3_serioregs __iomem *regs;
+	struct serio *kbd, *aux;
+	bool kbd_exists, aux_exists;
+	int irq;
+};
+
+static int ioc3kbd_wait(struct ioc3_serioregs __iomem *regs, u32 mask)
+{
+	unsigned long timeout = 0;
+
+	while ((readl(&regs->km_csr) & mask) && (timeout < 250)) {
+		udelay(50);
+		timeout++;
+	}
+	return (timeout >= 250) ? -ETIMEDOUT : 0;
+}
+
+static int ioc3kbd_write(struct serio *dev, u8 val)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+	int ret;
+
+	ret = ioc3kbd_wait(d->regs, KM_CSR_K_WRT_PEND);
+	if (ret)
+		return ret;
+
+	writel(val, &d->regs->k_wd);
+
+	return 0;
+}
+
+static int ioc3kbd_start(struct serio *dev)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+
+	d->kbd_exists = true;
+	return 0;
+}
+
+static void ioc3kbd_stop(struct serio *dev)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+
+	d->kbd_exists = false;
+}
+
+static int ioc3aux_write(struct serio *dev, u8 val)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+	int ret;
+
+	ret = ioc3kbd_wait(d->regs, KM_CSR_M_WRT_PEND);
+	if (ret)
+		return ret;
+
+	writel(val, &d->regs->m_wd);
+
+	return 0;
+}
+
+static int ioc3aux_start(struct serio *dev)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+
+	d->aux_exists = true;
+	return 0;
+}
+
+static void ioc3aux_stop(struct serio *dev)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+
+	d->aux_exists = false;
+}
+
+static void ioc3kbd_process_data(struct serio *dev, u32 data)
+{
+	if (data & KM_RD_VALID_0)
+		serio_interrupt(dev, (data >> KM_RD_DATA_0_SHIFT) & 0xff, 0);
+	if (data & KM_RD_VALID_1)
+		serio_interrupt(dev, (data >> KM_RD_DATA_1_SHIFT) & 0xff, 0);
+	if (data & KM_RD_VALID_2)
+		serio_interrupt(dev, (data >> KM_RD_DATA_2_SHIFT) & 0xff, 0);
+}
+
+static irqreturn_t ioc3kbd_intr(int itq, void *dev_id)
+{
+	struct ioc3kbd_data *d = dev_id;
+	u32 data_k, data_m;
+
+	data_k = readl(&d->regs->k_rd);
+	if (d->kbd_exists)
+		ioc3kbd_process_data(d->kbd, data_k);
+
+	data_m = readl(&d->regs->m_rd);
+	if (d->aux_exists)
+		ioc3kbd_process_data(d->aux, data_m);
+
+	return IRQ_HANDLED;
+}
+
+static int ioc3kbd_probe(struct platform_device *pdev)
+{
+	struct ioc3_serioregs __iomem *regs;
+	struct device *dev = &pdev->dev;
+	struct ioc3kbd_data *d;
+	struct serio *sk, *sa;
+	int irq, ret;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	sk = kzalloc(sizeof(*sk), GFP_KERNEL);
+	if (!sk)
+		return -ENOMEM;
+
+	sa = kzalloc(sizeof(*sa), GFP_KERNEL);
+	if (!sa) {
+		kfree(sk);
+		return -ENOMEM;
+	}
+
+	sk->id.type = SERIO_8042;
+	sk->write = ioc3kbd_write;
+	sk->start = ioc3kbd_start;
+	sk->stop = ioc3kbd_stop;
+	snprintf(sk->name, sizeof(sk->name), "IOC3 keyboard %d", pdev->id);
+	snprintf(sk->phys, sizeof(sk->phys), "ioc3/serio%dkbd", pdev->id);
+	sk->port_data = d;
+	sk->dev.parent = dev;
+
+	sa->id.type = SERIO_8042;
+	sa->write = ioc3aux_write;
+	sa->start = ioc3aux_start;
+	sa->stop = ioc3aux_stop;
+	snprintf(sa->name, sizeof(sa->name), "IOC3 auxiliary %d", pdev->id);
+	snprintf(sa->phys, sizeof(sa->phys), "ioc3/serio%daux", pdev->id);
+	sa->port_data = d;
+	sa->dev.parent = dev;
+
+	d->regs = regs;
+	d->kbd = sk;
+	d->aux = sa;
+	d->irq = irq;
+
+	platform_set_drvdata(pdev, d);
+	serio_register_port(d->kbd);
+	serio_register_port(d->aux);
+
+	ret = request_irq(irq, ioc3kbd_intr, IRQF_SHARED, "ioc3-kbd", d);
+	if (ret) {
+		dev_err(dev, "could not request IRQ %d\n", irq);
+		serio_unregister_port(d->kbd);
+		serio_unregister_port(d->aux);
+		return ret;
+	}
+
+	/* enable ports */
+	writel(KM_CSR_K_CLAMP_3 | KM_CSR_M_CLAMP_3, &regs->km_csr);
+
+	return 0;
+}
+
+static int ioc3kbd_remove(struct platform_device *pdev)
+{
+	struct ioc3kbd_data *d = platform_get_drvdata(pdev);
+
+	free_irq(d->irq, d);
+
+	serio_unregister_port(d->kbd);
+	serio_unregister_port(d->aux);
+
+	return 0;
+}
+
+static struct platform_driver ioc3kbd_driver = {
+	.probe          = ioc3kbd_probe,
+	.remove         = ioc3kbd_remove,
+	.driver = {
+		.name = "ioc3-kbd",
+	},
+};
+module_platform_driver(ioc3kbd_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
+MODULE_DESCRIPTION("SGI IOC3 serio driver");
+MODULE_LICENSE("GPL");
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@ -333,7 +333,8 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 		req->xfer[1].len = 2;

 		/* for 1uF, settle for 800 usec; no cap, 100 usec.  */
-		req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+		req->xfer[1].delay.value = ts->vref_delay_usecs;
+		req->xfer[1].delay.unit = SPI_DELAY_UNIT_USECS;
 		spi_message_add_tail(&req->xfer[1], &req->msg);

 		/* Enable reference voltage */
@ -1018,7 +1019,8 @@ static void ads7846_setup_spi_msg(struct ads7846 *ts,
 	 * have had enough time to stabilize.
 	 */
 	if (pdata->settle_delay_usecs) {
-		x->delay_usecs = pdata->settle_delay_usecs;
+		x->delay.value = pdata->settle_delay_usecs;
+		x->delay.unit = SPI_DELAY_UNIT_USECS;

 		x++;
 		x->tx_buf = &packet->read_y;
@ -1061,7 +1063,8 @@ static void ads7846_setup_spi_msg(struct ads7846 *ts,

 	/* ... maybe discard first sample ... */
 	if (pdata->settle_delay_usecs) {
-		x->delay_usecs = pdata->settle_delay_usecs;
+		x->delay.value = pdata->settle_delay_usecs;
+		x->delay.unit = SPI_DELAY_UNIT_USECS;

 		x++;
 		x->tx_buf = &packet->read_x;
@ -1094,7 +1097,8 @@ static void ads7846_setup_spi_msg(struct ads7846 *ts,

 		/* ... maybe discard first sample ... */
 		if (pdata->settle_delay_usecs) {
-			x->delay_usecs = pdata->settle_delay_usecs;
+			x->delay.value = pdata->settle_delay_usecs;
+			x->delay.unit = SPI_DELAY_UNIT_USECS;

 			x++;
 			x->tx_buf = &packet->read_z1;
@ -1125,7 +1129,8 @@ static void ads7846_setup_spi_msg(struct ads7846 *ts,

 		/* ... maybe discard first sample ... */
 		if (pdata->settle_delay_usecs) {
-			x->delay_usecs = pdata->settle_delay_usecs;
+			x->delay.value = pdata->settle_delay_usecs;
+			x->delay.unit = SPI_DELAY_UNIT_USECS;

 			x++;
 			x->tx_buf = &packet->read_z2;
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@ -13,22 +13,23 @@
 *    http://www.glyn.com/Products/Displays
 */

-#include <linux/module.h>
-#include <linux/ratelimit.h>
-#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/kernel.h>
-#include <linux/uaccess.h>
-#include <linux/delay.h>
-#include <linux/debugfs.h>
-#include <linux/slab.h>
-#include <linux/gpio/consumer.h>
 #include <linux/input/mt.h>
 #include <linux/input/touchscreen.h>
-#include <asm/unaligned.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ratelimit.h>
 #include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <asm/unaligned.h>

 #define WORK_REGISTER_THRESHOLD		0x00
 #define WORK_REGISTER_REPORT_RATE	0x08
@ -1050,6 +1051,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 {
 	const struct edt_i2c_chip_data *chip_data;
 	struct edt_ft5x06_ts_data *tsdata;
+	u8 buf[2] = { 0xfc, 0x00 };
 	struct input_dev *input;
 	unsigned long irq_flags;
 	int error;
@ -1140,6 +1142,12 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 		return error;
 	}

+	/*
+	 * Dummy read access. EP0700MLP1 returns bogus data on the first
+	 * register read access and ignores writes.
+	 */
+	edt_ft5x06_ts_readwrite(tsdata->client, 2, buf, 2, buf);
+
 	edt_ft5x06_ts_set_regs(tsdata);
 	edt_ft5x06_ts_get_defaults(&client->dev, tsdata);
 	edt_ft5x06_ts_get_parameters(tsdata);
@ -1200,7 +1208,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 		return error;

 	edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
-	device_init_wakeup(&client->dev, 1);

 	dev_dbg(&client->dev,
 		"EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n",
@ -1220,29 +1227,6 @@ static int edt_ft5x06_ts_remove(struct i2c_client *client)
 	return 0;
 }

-static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-
-	if (device_may_wakeup(dev))
-		enable_irq_wake(client->irq);
-
-	return 0;
-}
-
-static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-
-	if (device_may_wakeup(dev))
-		disable_irq_wake(client->irq);
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
-			 edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
-
 static const struct edt_i2c_chip_data edt_ft5x06_data = {
 	.max_support_points = 5,
 };
@ -1281,7 +1265,6 @@ static struct i2c_driver edt_ft5x06_ts_driver = {
 	.driver = {
 		.name = "edt_ft5x06",
 		.of_match_table = edt_ft5x06_of_match,
-		.pm = &edt_ft5x06_ts_pm_ops,
 	},
 	.id_table = edt_ft5x06_ts_id,
 	.probe    = edt_ft5x06_ts_probe,
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@ -59,8 +59,10 @@
 #define CMD_HEADER_WRITE	0x54
 #define CMD_HEADER_READ		0x53
 #define CMD_HEADER_6B_READ	0x5B
+#define CMD_HEADER_ROM_READ	0x96
 #define CMD_HEADER_RESP		0x52
 #define CMD_HEADER_6B_RESP	0x9B
+#define CMD_HEADER_ROM_RESP	0x95
 #define CMD_HEADER_HELLO	0x55
 #define CMD_HEADER_REK		0x66

@ -200,6 +202,10 @@ static int elants_i2c_execute_command(struct i2c_client *client,
 		expected_response = CMD_HEADER_6B_RESP;
 		break;

+	case CMD_HEADER_ROM_READ:
+		expected_response = CMD_HEADER_ROM_RESP;
+		break;
+
 	default:
 		dev_err(&client->dev, "%s: invalid command %*ph\n",
 			__func__, (int)cmd_size, cmd);
@ -556,6 +562,8 @@ static int elants_i2c_initialize(struct elants_data *ts)

 	/* hw version is available even if device in recovery state */
 	error2 = elants_i2c_query_hw_version(ts);
+	if (!error2)
+		error2 = elants_i2c_query_bc_version(ts);
 	if (!error)
 		error = error2;

@ -563,8 +571,6 @@ static int elants_i2c_initialize(struct elants_data *ts)
 		error = elants_i2c_query_fw_version(ts);
 	if (!error)
 		error = elants_i2c_query_test_version(ts);
-	if (!error)
-		error = elants_i2c_query_bc_version(ts);
 	if (!error)
 		error = elants_i2c_query_ts_info(ts);

@ -613,39 +619,94 @@ static int elants_i2c_fw_write_page(struct i2c_client *client,
 	return error;
 }

+static int elants_i2c_validate_remark_id(struct elants_data *ts,
+					 const struct firmware *fw)
+{
+	struct i2c_client *client = ts->client;
+	int error;
+	const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21 };
+	u8 resp[6] = { 0 };
+	u16 ts_remark_id = 0;
+	u16 fw_remark_id = 0;
+
+	/* Compare TS Remark ID and FW Remark ID */
+	error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+					resp, sizeof(resp));
+	if (error) {
+		dev_err(&client->dev, "failed to query Remark ID: %d\n", error);
+		return error;
+	}
+
+	ts_remark_id = get_unaligned_be16(&resp[3]);
+
+	fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
+
+	if (fw_remark_id != ts_remark_id) {
+		dev_err(&client->dev,
+			"Remark ID Mismatched: ts_remark_id=0x%04x, fw_remark_id=0x%04x.\n",
+			ts_remark_id, fw_remark_id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int elants_i2c_do_update_firmware(struct i2c_client *client,
 					 const struct firmware *fw,
 					 bool force)
 {
+	struct elants_data *ts = i2c_get_clientdata(client);
 	const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
 	const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
 	const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
-	const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
+	const u8 close_idle[] = { 0x54, 0x2c, 0x01, 0x01 };
 	u8 buf[HEADER_SIZE];
 	u16 send_id;
 	int page, n_fw_pages;
 	int error;
+	bool check_remark_id = ts->iap_version >= 0x60;

 	/* Recovery mode detection! */
 	if (force) {
 		dev_dbg(&client->dev, "Recovery mode procedure\n");
+
+		if (check_remark_id) {
+			error = elants_i2c_validate_remark_id(ts, fw);
+			if (error)
+				return error;
+		}
+
 		error = elants_i2c_send(client, enter_iap2, sizeof(enter_iap2));
+		if (error) {
+			dev_err(&client->dev, "failed to enter IAP mode: %d\n",
+				error);
+			return error;
+		}
 	} else {
 		/* Start IAP Procedure */
 		dev_dbg(&client->dev, "Normal IAP procedure\n");
+
 		/* Close idle mode */
 		error = elants_i2c_send(client, close_idle, sizeof(close_idle));
 		if (error)
 			dev_err(&client->dev, "Failed close idle: %d\n", error);
 		msleep(60);
+
 		elants_i2c_sw_reset(client);
 		msleep(20);
-		error = elants_i2c_send(client, enter_iap, sizeof(enter_iap));
-	}

-	if (error) {
-		dev_err(&client->dev, "failed to enter IAP mode: %d\n", error);
-		return error;
+		if (check_remark_id) {
+			error = elants_i2c_validate_remark_id(ts, fw);
+			if (error)
+				return error;
+		}
+
+		error = elants_i2c_send(client, enter_iap, sizeof(enter_iap));
+		if (error) {
+			dev_err(&client->dev, "failed to enter IAP mode: %d\n",
+				error);
+			return error;
+		}
 	}

 	msleep(20);