powerpc/pci: Move PHB discovery for PCI_DN using platforms

Make powernv, pseries, powermac and maple use ppc_mc.discover_phbs.
These platforms need to be done together because they all depend on
pci_dn's being created from the DT. The pci_dn contains a pointer to
the relevant pci_controller so they need to be created after the
pci_controller structures are available, but before PCI devices are
scanned. Currently this ordering is provided by initcalls and the
sequence is:

  1. PHBs are discovered (setup_arch) (early boot, pre-initcalls)
  2. pci_dn are created from the unflattended DT (core initcall)
  3. PHBs are scanned pcibios_init() (subsys initcall)

The new ppc_md.discover_phbs() function is also a core_initcall so we
can't guarantee ordering between the creation of pci_controllers and
the creation of pci_dn's which require a pci_controller. We could use
the postcore, or core_sync initcall levels, but it's cleaner to just
move the pci_dn setup into the per-PHB inits which occur inside of
.discover_phb() for these platforms. This brings the boot-time path in
line with the PHB hotplug path that is used for pseries DLPAR
operations too.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Squash powermac & maple in to avoid breakage those platforms,
      convert memblock allocs to use kmalloc to avoid warnings]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201103043523.916109-2-oohall@gmail.com

arch/powerpc/kernel/pci_dn.c

@@ -481,28 +481,6 @@ void pci_devs_phb_init_dynamic(struct pci_controller *phb)
 	pci_traverse_device_nodes(dn, add_pdn, phb);
 }
 
-/** 
- * pci_devs_phb_init - Initialize phbs and pci devs under them.
- * 
- * This routine walks over all phb's (pci-host bridges) on the
- * system, and sets up assorted pci-related structures 
- * (including pci info in the device node structs) for each
- * pci device found underneath.  This routine runs once,
- * early in the boot sequence.
- */
-static int __init pci_devs_phb_init(void)
-{
-	struct pci_controller *phb, *tmp;
-
-	/* This must be done first so the device nodes have valid pci info! */
-	list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
-		pci_devs_phb_init_dynamic(phb);
-
-	return 0;
-}
-
-core_initcall(pci_devs_phb_init);
-
 static void pci_dev_pdn_setup(struct pci_dev *pdev)
 {
 	struct pci_dn *pdn;

arch/powerpc/platforms/maple/pci.c

@@ -536,6 +536,9 @@ static int __init maple_add_bridge(struct device_node *dev)
 	/* Check for legacy IOs */
 	isa_bridge_find_early(hose);
 
+	/* create pci_dn's for DT nodes under this PHB */
+	pci_devs_phb_init_dynamic(hose);
+
 	return 0;
 }
 

arch/powerpc/platforms/maple/setup.c

@@ -179,9 +179,6 @@ static void __init maple_setup_arch(void)
 #ifdef CONFIG_SMP
 	smp_ops = &maple_smp_ops;
 #endif
-	/* Lookup PCI hosts */
-       	maple_pci_init();
-
 	maple_use_rtas_reboot_and_halt_if_present();
 
 	printk(KERN_DEBUG "Using native/NAP idle loop\n");
@@ -351,6 +348,7 @@ define_machine(maple) {
 	.name			= "Maple",
 	.probe			= maple_probe,
 	.setup_arch		= maple_setup_arch,
+	.discover_phbs		= maple_pci_init,
 	.init_IRQ		= maple_init_IRQ,
 	.pci_irq_fixup		= maple_pci_irq_fixup,
 	.pci_get_legacy_ide_irq	= maple_pci_get_legacy_ide_irq,

arch/powerpc/platforms/powermac/pci.c

@@ -850,6 +850,10 @@ static int __init pmac_add_bridge(struct device_node *dev)
 	/* Fixup "bus-range" OF property */
 	fixup_bus_range(dev);
 
+	/* create pci_dn's for DT nodes under this PHB */
+	if (IS_ENABLED(CONFIG_PPC64))
+		pci_devs_phb_init_dynamic(hose);
+
 	return 0;
 }
 

arch/powerpc/platforms/powermac/setup.c

@@ -298,9 +298,6 @@ static void __init pmac_setup_arch(void)
 		of_node_put(ic);
 	}
 
-	/* Lookup PCI hosts */
-	pmac_pci_init();
-
 #ifdef CONFIG_PPC32
 	ohare_init();
 	l2cr_init();
@@ -600,6 +597,7 @@ define_machine(powermac) {
 	.name			= "PowerMac",
 	.probe			= pmac_probe,
 	.setup_arch		= pmac_setup_arch,
+	.discover_phbs		= pmac_pci_init,
 	.show_cpuinfo		= pmac_show_cpuinfo,
 	.init_IRQ		= pmac_pic_init,
 	.get_irq		= NULL,	/* changed later */

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -2921,7 +2921,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	phb_id = be64_to_cpup(prop64);
 	pr_debug("  PHB-ID  : 0x%016llx\n", phb_id);
 
-	phb = memblock_alloc(sizeof(*phb), SMP_CACHE_BYTES);
+	phb = kmalloc(sizeof(*phb), GFP_KERNEL);
 	if (!phb)
 		panic("%s: Failed to allocate %zu bytes\n", __func__,
 		      sizeof(*phb));
@@ -2970,7 +2970,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	else
 		phb->diag_data_size = PNV_PCI_DIAG_BUF_SIZE;
 
-	phb->diag_data = memblock_alloc(phb->diag_data_size, SMP_CACHE_BYTES);
+	phb->diag_data = kmalloc(phb->diag_data_size, GFP_KERNEL);
 	if (!phb->diag_data)
 		panic("%s: Failed to allocate %u bytes\n", __func__,
 		      phb->diag_data_size);
@@ -3032,9 +3032,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	}
 	pemap_off = size;
 	size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe);
-	aux = memblock_alloc(size, SMP_CACHE_BYTES);
+	aux = kmalloc(size, GFP_KERNEL);
 	if (!aux)
 		panic("%s: Failed to allocate %lu bytes\n", __func__, size);
+
 	phb->ioda.pe_alloc = aux;
 	phb->ioda.m64_segmap = aux + m64map_off;
 	phb->ioda.m32_segmap = aux + m32map_off;
@@ -3161,6 +3162,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	/* Remove M64 resource if we can't configure it successfully */
 	if (!phb->init_m64 || phb->init_m64(phb))
 		hose->mem_resources[1].flags = 0;
+
+	/* create pci_dn's for DT nodes under this PHB */
+	pci_devs_phb_init_dynamic(hose);
 }
 
 void __init pnv_pci_init_ioda2_phb(struct device_node *np)

arch/powerpc/platforms/powernv/setup.c

@@ -180,9 +180,6 @@ static void __init pnv_setup_arch(void)
 	/* Initialize SMP */
 	pnv_smp_init();
 
-	/* Setup PCI */
-	pnv_pci_init();
-
 	/* Setup RTC and NVRAM callbacks */
 	if (firmware_has_feature(FW_FEATURE_OPAL))
 		opal_nvram_init();
@@ -547,6 +544,7 @@ define_machine(powernv) {
 	.init_IRQ		= pnv_init_IRQ,
 	.show_cpuinfo		= pnv_show_cpuinfo,
 	.get_proc_freq          = pnv_get_proc_freq,
+	.discover_phbs		= pnv_pci_init,
 	.progress		= pnv_progress,
 	.machine_shutdown	= pnv_shutdown,
 	.power_save             = NULL,

arch/powerpc/platforms/pseries/setup.c

@@ -463,7 +463,7 @@ void pseries_little_endian_exceptions(void)
 }
 #endif
 
-static void __init find_and_init_phbs(void)
+static void __init pSeries_discover_phbs(void)
 {
 	struct device_node *node;
 	struct pci_controller *phb;
@@ -481,6 +481,9 @@ static void __init find_and_init_phbs(void)
 		pci_process_bridge_OF_ranges(phb, node, 0);
 		isa_bridge_find_early(phb);
 		phb->controller_ops = pseries_pci_controller_ops;
+
+		/* create pci_dn's for DT nodes under this PHB */
+		pci_devs_phb_init_dynamic(phb);
 	}
 
 	of_node_put(root);
@@ -786,7 +789,6 @@ static void __init pSeries_setup_arch(void)
 
 	/* Find and initialize PCI host bridges */
 	init_pci_config_tokens();
-	find_and_init_phbs();
 	of_reconfig_notifier_register(&pci_dn_reconfig_nb);
 
 	pSeries_nvram_init();
@@ -1050,6 +1052,7 @@ define_machine(pseries) {
 	.init_IRQ		= pseries_init_irq,
 	.show_cpuinfo		= pSeries_show_cpuinfo,
 	.log_error		= pSeries_log_error,
+	.discover_phbs		= pSeries_discover_phbs,
 	.pcibios_fixup		= pSeries_final_fixup,
 	.restart		= rtas_restart,
 	.halt			= rtas_halt,