ARM: OMAP4+: Use common scratchpad SAR RAM offsets for all architectures

Choose the common scratch pad offsets, so that same offsets can work for
OMAP4 and OMAP5 devices. It simplifies code and also allows the re-use as
is on OMAP5 devices. Note that these offsets are used by low power
code for various power state management. They are not hardware register
offsets.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
This commit is contained in:
Tero Kristo 2013-02-06 18:39:20 +05:30 committed by Santosh Shilimkar
parent a937536b86
commit f98d5fe807

View File

@ -20,13 +20,13 @@
#define SAR_BANK4_OFFSET 0x3000
/* Scratch pad memory offsets from SAR_BANK1 */
#define SCU_OFFSET0 0xd00
#define SCU_OFFSET1 0xd04
#define OMAP_TYPE_OFFSET 0xd10
#define L2X0_SAVE_OFFSET0 0xd14
#define L2X0_SAVE_OFFSET1 0xd18
#define L2X0_AUXCTRL_OFFSET 0xd1c
#define L2X0_PREFETCH_CTRL_OFFSET 0xd20
#define SCU_OFFSET0 0xfe4
#define SCU_OFFSET1 0xfe8
#define OMAP_TYPE_OFFSET 0xfec
#define L2X0_SAVE_OFFSET0 0xff0
#define L2X0_SAVE_OFFSET1 0xff4
#define L2X0_AUXCTRL_OFFSET 0xff8
#define L2X0_PREFETCH_CTRL_OFFSET 0xffc
/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
#define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04