mtd: gpmi: remove the nand_scan()

In order to make the nand_scan() work, the current code uses the hack code
to init the @nand_chip->ecc.size and the @nand_chip->ecc.strength. and
re-init some the ECC info in the gpmi_pre_bbt_scan().
This code is really a little ugly.

The patch does following changes:
  (1) Use the nand_scan_ident()/nand_scan_tail() to replace the nand_scan().

  (2) Init all the necessary values in the gpmi_init_last()
      before we call the nand_scan_tail().

  (3) remove the code setting the ECC info, let the mtd layer to do the
      real job.

  (4) remove the gpmi_scan_bbt(). we do not need this function any more.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
Huang Shijie 2013-08-16 10:10:08 +08:00 committed by David Woodhouse
parent 4204cccde5
commit f720e7ce51

View File

@ -214,7 +214,6 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
if (geo->page_size < mtd->writesize + mtd->oobsize) {
of->offset = geo->page_size - mtd->writesize;
of->length = mtd->oobsize - of->offset;
mtd->oobavail = gpmi_hw_ecclayout.oobavail = of->length;
}
geo->payload_size = mtd->writesize;
@ -1582,19 +1581,22 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this)
if (ret)
return ret;
/* Adjust the ECC strength according to the chip. */
this->nand.ecc.strength = this->bch_geometry.ecc_strength;
this->mtd.ecc_strength = this->bch_geometry.ecc_strength;
this->mtd.bitflip_threshold = this->bch_geometry.ecc_strength;
/* NAND boot init, depends on the gpmi_set_geometry(). */
return nand_boot_init(this);
}
static int gpmi_scan_bbt(struct mtd_info *mtd)
static void gpmi_nfc_exit(struct gpmi_nand_data *this)
{
nand_release(&this->mtd);
gpmi_free_dma_buffer(this);
}
static int gpmi_init_last(struct gpmi_nand_data *this)
{
struct mtd_info *mtd = &this->mtd;
struct nand_chip *chip = mtd->priv;
struct gpmi_nand_data *this = chip->priv;
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct bch_geometry *bch_geo = &this->bch_geometry;
int ret;
/* Prepare for the BBT scan. */
@ -1602,6 +1604,16 @@ static int gpmi_scan_bbt(struct mtd_info *mtd)
if (ret)
return ret;
/* Init the nand_ecc_ctrl{} */
ecc->read_page = gpmi_ecc_read_page;
ecc->write_page = gpmi_ecc_write_page;
ecc->read_oob = gpmi_ecc_read_oob;
ecc->write_oob = gpmi_ecc_write_oob;
ecc->mode = NAND_ECC_HW;
ecc->size = bch_geo->ecc_chunk_size;
ecc->strength = bch_geo->ecc_strength;
ecc->layout = &gpmi_hw_ecclayout;
/*
* Can we enable the extra features? such as EDO or Sync mode.
*
@ -1610,14 +1622,7 @@ static int gpmi_scan_bbt(struct mtd_info *mtd)
*/
gpmi_extra_init(this);
/* use the default BBT implementation */
return nand_default_bbt(mtd);
}
static void gpmi_nfc_exit(struct gpmi_nand_data *this)
{
nand_release(&this->mtd);
gpmi_free_dma_buffer(this);
return 0;
}
static int gpmi_nfc_init(struct gpmi_nand_data *this)
@ -1643,33 +1648,33 @@ static int gpmi_nfc_init(struct gpmi_nand_data *this)
chip->read_byte = gpmi_read_byte;
chip->read_buf = gpmi_read_buf;
chip->write_buf = gpmi_write_buf;
chip->ecc.read_page = gpmi_ecc_read_page;
chip->ecc.write_page = gpmi_ecc_write_page;
chip->ecc.read_oob = gpmi_ecc_read_oob;
chip->ecc.write_oob = gpmi_ecc_write_oob;
chip->scan_bbt = gpmi_scan_bbt;
chip->badblock_pattern = &gpmi_bbt_descr;
chip->block_markbad = gpmi_block_markbad;
chip->options |= NAND_NO_SUBPAGE_WRITE;
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 1;
chip->ecc.strength = 8;
chip->ecc.layout = &gpmi_hw_ecclayout;
if (of_get_nand_on_flash_bbt(this->dev->of_node))
chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
/* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
/*
* Allocate a temporary DMA buffer for reading ID in the
* nand_scan_ident().
*/
this->bch_geometry.payload_size = 1024;
this->bch_geometry.auxiliary_size = 128;
ret = gpmi_alloc_dma_buffer(this);
if (ret)
goto err_out;
ret = nand_scan(mtd, 1);
if (ret) {
pr_err("Chip scan failed\n");
ret = nand_scan_ident(mtd, 1, NULL);
if (ret)
goto err_out;
ret = gpmi_init_last(this);
if (ret)
goto err_out;
ret = nand_scan_tail(mtd);
if (ret)
goto err_out;
}
ppdata.of_node = this->pdev->dev.of_node;
ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);