korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-25 05:04:09 +08:00
Code Issues Packages Projects Releases Wiki Activity

clk: iproc: Split off dig_filter

Browse Source 
The PLL loop filter/gain can be located in a separate register on some
SoCs.  Split these off into a separate variable, so that an offset can
be added if necessary.  Also, make the necessary modifications to the
Cygnus and NSP drivers for this change.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This commit is contained in:
Jon Mason 2015-10-15 15:48:29 -04:00 committed by Stephen Boyd
parent 7968d24107
commit f713c6bf32
4 changed files with 38 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/clk/bcm/clk-cygnus.c
View File

@ -34,9 +34,11 @@
{ .offset = o, .en_shift = es, .high_shift = hs, \
.high_width = hw, .low_shift = ls, .low_width = lw }
#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
.reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
.p_reset_shift = prs }
#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
.ka_width = kaw }
#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
@ -56,7 +58,8 @@ static const struct iproc_pll_ctrl genpll = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
IPROC_CLK_PLL_NEEDS_SW_CFG,
.aon = AON_VAL(0x0, 2, 1, 0),
.reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
.reset = RESET_VAL(0x0, 11, 10),
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
.sw_ctrl = SW_CTRL_VAL(0x10, 31),
.ndiv_int = REG_VAL(0x10, 20, 10),
.ndiv_frac = REG_VAL(0x10, 0, 20),
@ -114,7 +117,8 @@ CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);
static const struct iproc_pll_ctrl lcpll0 = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
.aon = AON_VAL(0x0, 2, 5, 4),
.reset = RESET_VAL(0x0, 31, 30, 27, 3, 23, 4, 19, 4),
.reset = RESET_VAL(0x0, 31, 30),
.dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
.sw_ctrl = SW_CTRL_VAL(0x4, 31),
.ndiv_int = REG_VAL(0x4, 16, 10),
.pdiv = REG_VAL(0x4, 26, 4),
@ -191,7 +195,8 @@ static const struct iproc_pll_ctrl mipipll = {
IPROC_CLK_NEEDS_READ_BACK,
.aon = AON_VAL(0x0, 4, 17, 16),
.asiu = ASIU_GATE_VAL(0x0, 3),
.reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 4),
.reset = RESET_VAL(0x0, 11, 10),
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
.ndiv_int = REG_VAL(0x10, 20, 10),
.ndiv_frac = REG_VAL(0x10, 0, 20),
.pdiv = REG_VAL(0x14, 0, 4),

14
drivers/clk/bcm/clk-iproc-pll.c
View File

@ -224,13 +224,17 @@ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
u32 val;
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
val = readl(pll->pll_base + dig_filter->offset);
val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
ka << dig_filter->ka_shift;
iproc_pll_write(pll, pll->pll_base, dig_filter->offset, val);
val = readl(pll->pll_base + reset->offset);
val &= ~(bit_mask(reset->ki_width) << reset->ki_shift |
bit_mask(reset->kp_width) << reset->kp_shift |
bit_mask(reset->ka_width) << reset->ka_shift);
val |= ki << reset->ki_shift | kp << reset->kp_shift |
ka << reset->ka_shift;
val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
iproc_pll_write(pll, pll->pll_base, reset->offset, val);
}

10
drivers/clk/bcm/clk-iproc.h
View File

@ -94,12 +94,19 @@ struct iproc_pll_aon_pwr_ctrl {
};
/*
* Control of the PLL reset, with Ki, Kp, and Ka parameters
* Control of the PLL reset
*/
struct iproc_pll_reset_ctrl {
unsigned int offset;
unsigned int reset_shift;
unsigned int p_reset_shift;
};
/*
* Control of the Ki, Kp, and Ka parameters
*/
struct iproc_pll_dig_filter_ctrl {
unsigned int offset;
unsigned int ki_shift;
unsigned int ki_width;
unsigned int kp_shift;
@ -129,6 +136,7 @@ struct iproc_pll_ctrl {
struct iproc_pll_aon_pwr_ctrl aon;
struct iproc_asiu_gate asiu;
struct iproc_pll_reset_ctrl reset;
struct iproc_pll_dig_filter_ctrl dig_filter;
struct iproc_pll_sw_ctrl sw_ctrl;
struct iproc_clk_reg_op ndiv_int;
struct iproc_clk_reg_op ndiv_frac;

14
drivers/clk/bcm/clk-nsp.c
View File

@ -26,9 +26,11 @@
#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
.pwr_shift = ps, .iso_shift = is }
#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
.reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
.p_reset_shift = prs }
#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
.ka_width = kaw }
#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
@ -43,7 +45,8 @@ CLK_OF_DECLARE(nsp_armpll, "brcm,nsp-armpll", nsp_armpll_init);
static const struct iproc_pll_ctrl genpll = {
.flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
.aon = AON_VAL(0x0, 1, 12, 0),
.reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
.reset = RESET_VAL(0x0, 11, 10),
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
.ndiv_int = REG_VAL(0x14, 20, 10),
.ndiv_frac = REG_VAL(0x14, 0, 20),
.pdiv = REG_VAL(0x18, 24, 3),
@ -99,7 +102,8 @@ CLK_OF_DECLARE(nsp_genpll_clk, "brcm,nsp-genpll", nsp_genpll_clk_init);
static const struct iproc_pll_ctrl lcpll0 = {
.flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
.aon = AON_VAL(0x0, 1, 24, 0),
.reset = RESET_VAL(0x0, 23, 22, 16, 3, 12, 4, 19, 4),
.reset = RESET_VAL(0x0, 23, 22),
.dig_filter = DF_VAL(0x0, 16, 3, 12, 4, 19, 4),
.ndiv_int = REG_VAL(0x4, 20, 8),
.ndiv_frac = REG_VAL(0x4, 0, 20),
.pdiv = REG_VAL(0x4, 28, 3),