korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-03 00:54:09 +08:00
Code Issues Packages Projects Releases Wiki Activity

MIPS: ranchu: Add Ranchu as a new generic-based board

Browse Source 
Provide amendments to the MIPS generic platform framework so that
the new generic-based board Ranchu can be chosen to be built.

The Ranchu board is intended to be used by Android emulator. The name
"Ranchu" originates from Android development community. "Goldfish" and
"Ranchu" are terms used for two generations of virtual boards used by
Android emulator. The name "Ranchu" is a newer one among the two, and
this patch deals with Ranchu. However, for historical reasons, some
devices/drivers still contain the name "Goldfish".

MIPS Ranchu machine includes a number of Goldfish devices. The support
for Virtio devices is also included. Ranchu board supports up to 16
Virtio devices which can be attached using Virtio MMIO Bus. This is
summarized in the following picture:

       ABUS
        ||----MIPS CPU
        ||       |                    IRQs
        ||----Goldfish PIC------------(32)--------
        ||                     | | | | | | | | |
        ||----Goldfish TTY------ | | | | | | | |
        ||                       | | | | | | | |
        ||----Goldfish RTC-------- | | | | | | |
        ||                         | | | | | | |
        ||----Goldfish FB----------- | | | | | |
        ||                           | | | | | |
        ||----Goldfish Events--------- | | | | |
        ||                             | | | | |
        ||----Goldfish Audio------------ | | | |
        ||                               | | | |
        ||----Goldfish Battery------------ | | |
        ||                                 | | |
        ||----Android PIPE------------------ | |
        ||                                   | |
        ||----Virtio MMIO Bus                | |
        ||    |    |    |                    | |
        ||    |    |   (virtio-block)--------- |
        ||   (16)  |                           |
        ||    |   (virtio-net)------------------

Device Tree is created on the QEMU side based on the information about
devices IO map and IRQ numbers. Kernel will load this DTB using UHI
boot protocol DTB handover mode.

Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18138/
Signed-off-by: James Hogan <jhogan@kernel.org>
This commit is contained in:
Miodrag Dinic 2017-12-29 16:41:47 +01:00 committed by James Hogan
parent cdf93470a0
commit f2d0b0d5c1
No known key found for this signature in database
GPG Key ID: 6C0B6993DE38767A
5 changed files with 140 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
MAINTAINERS
View File

@ -11456,6 +11456,13 @@ S: Maintained
F: Documentation/blockdev/ramdisk.txt
F: drivers/block/brd.c
RANCHU VIRTUAL BOARD FOR MIPS
M: Miodrag Dinic <miodrag.dinic@mips.com>
L: linux-mips@linux-mips.org
S: Supported
F: arch/mips/generic/board-ranchu.c
F: arch/mips/configs/generic/board-ranchu.config
RANDOM NUMBER DRIVER
M: "Theodore Ts'o" <tytso@mit.edu>
S: Maintained

30
arch/mips/configs/generic/board-ranchu.config Normal file
View File

@ -0,0 +1,30 @@
CONFIG_VIRT_BOARD_RANCHU=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_FB=y
CONFIG_FB_GOLDFISH=y
CONFIG_GOLDFISH=y
CONFIG_STAGING=y
CONFIG_GOLDFISH_AUDIO=y
CONFIG_GOLDFISH_PIC=y
CONFIG_GOLDFISH_PIPE=y
CONFIG_GOLDFISH_TTY=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_GOLDFISH=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_VIRTIO_BLK=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_NETDEVICES=y
CONFIG_VIRTIO_NET=y

10
arch/mips/generic/Kconfig
View File

@ -49,4 +49,14 @@ config FIT_IMAGE_FDT_XILFPGA
Enable this to include the FDT for the MIPSfpga platform
from Imagination Technologies in the FIT kernel image.
config VIRT_BOARD_RANCHU
bool "Support Ranchu platform for Android emulator"
help
This enables support for the platform used by Android emulator.
Ranchu platform consists of a set of virtual devices. This platform
enables emulation of variety of virtual configurations while using
Android emulator. Android emulator is based on Qemu, and contains
the support for the same set of virtual devices.
endif

1
arch/mips/generic/Makefile
View File

@ -15,3 +15,4 @@ obj-y += proc.o
obj-$(CONFIG_YAMON_DT_SHIM) += yamon-dt.o
obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_VIRT_BOARD_RANCHU) += board-ranchu.o

92
arch/mips/generic/board-ranchu.c Normal file
View File

@ -0,0 +1,92 @@
/*
* Support code for virtual Ranchu board for MIPS.
*
* Author: Miodrag Dinic <miodrag.dinic@mips.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/of_address.h>
#include <linux/types.h>
#include <asm/machine.h>
#include <asm/mipsregs.h>
#include <asm/time.h>
#define GOLDFISH_TIMER_LOW 0x00
#define GOLDFISH_TIMER_HIGH 0x04
static __init u64 read_rtc_time(void __iomem *base)
{
u32 time_low;
u32 time_high;
/*
* Reading the low address latches the high value
* as well so there is no fear that we may read
* inaccurate high value.
*/
time_low = readl(base + GOLDFISH_TIMER_LOW);
time_high = readl(base + GOLDFISH_TIMER_HIGH);
return ((u64)time_high << 32) | time_low;
}
static __init unsigned int ranchu_measure_hpt_freq(void)
{
u64 rtc_start, rtc_current, rtc_delta;
unsigned int start, count;
struct device_node *np;
void __iomem *rtc_base;
np = of_find_compatible_node(NULL, NULL, "google,goldfish-rtc");
if (!np)
panic("%s(): Failed to find 'google,goldfish-rtc' dt node!",
__func__);
rtc_base = of_iomap(np, 0);
if (!rtc_base)
panic("%s(): Failed to ioremap Goldfish RTC base!", __func__);
/*
* Poll the nanosecond resolution RTC for one
* second to calibrate the CPU frequency.
*/
rtc_start = read_rtc_time(rtc_base);
start = read_c0_count();
do {
rtc_current = read_rtc_time(rtc_base);
rtc_delta = rtc_current - rtc_start;
} while (rtc_delta < NSEC_PER_SEC);
count = read_c0_count() - start;
/*
* Make sure the frequency will be a round number.
* Without this correction, the returned value may vary
* between subsequent emulation executions.
*
* TODO: Set this value using device tree.
*/
count += 5000;
count -= count % 10000;
iounmap(rtc_base);
return count;
}
static const struct of_device_id ranchu_of_match[] __initconst = {
{
.compatible = "mti,ranchu",
},
};
MIPS_MACHINE(ranchu) = {
.matches = ranchu_of_match,
.measure_hpt_freq = ranchu_measure_hpt_freq,
};