From 37dc78d9b17c971479f742d6d08f38d8f2beb688 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 18 Mar 2016 16:15:47 +0100 Subject: [PATCH 01/11] ARM: ux500: remove unused regulator data Most of the board-mop500-regulators.c file is never referenced and can simply be removed. Cc: Mark Brown Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-regulators.c | 600 ------------------ arch/arm/mach-ux500/board-mop500-regulators.h | 8 - 2 files changed, 608 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 32d744e91ec2..eff141ddeea5 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -13,46 +13,6 @@ #include #include #include "board-mop500-regulators.h" -#include "id.h" - -static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -struct regulator_init_data gpio_en_3v3_regulator = { - .constraints = { - .name = "EN-3V3", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers), - .consumer_supplies = gpio_en_3v3_consumers, -}; - -/* - * TPS61052 regulator - */ -static struct regulator_consumer_supply tps61052_vaudio_consumers[] = { - /* - * Boost converter supply to raise voltage on audio speaker, this - * is actually connected to three pins, VInVhfL (left amplifier) - * VInVhfR (right amplifier) and VIntDClassInt - all three must - * be connected to the same voltage. - */ - REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"), -}; - -struct regulator_init_data tps61052_regulator = { - .constraints = { - .name = "vaudio-hf", - .min_uV = 4500000, - .max_uV = 4500000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers), - .consumer_supplies = tps61052_vaudio_consumers, -}; static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { /* Main display, u8500 R3 uib */ @@ -107,27 +67,6 @@ static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { REGULATOR_SUPPLY("vmmc", "sdi0"), }; -static struct regulator_consumer_supply ab8505_vaux4_consumers[] = { -}; - -static struct regulator_consumer_supply ab8505_vaux5_consumers[] = { -}; - -static struct regulator_consumer_supply ab8505_vaux6_consumers[] = { -}; - -static struct regulator_consumer_supply ab8505_vaux8_consumers[] = { - /* AB8500 audio codec device */ - REGULATOR_SUPPLY("v-aux8", NULL), -}; - -static struct regulator_consumer_supply ab8505_vadc_consumers[] = { - /* Internal general-purpose ADC */ - REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), - /* ADC for charger */ - REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), -}; - static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { /* TV-out DENC supply */ REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), @@ -168,11 +107,6 @@ static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), }; -static struct regulator_consumer_supply ab8505_usb_consumers[] = { - /* HS USB OTG physical interface */ - REGULATOR_SUPPLY("v-ape", NULL), -}; - static struct regulator_consumer_supply ab8500_vana_consumers[] = { /* DB8500 DSI */ REGULATOR_SUPPLY("vdddsi1v2", "mcde"), @@ -483,11 +417,6 @@ static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), }; -/* extended configuration for VextSupply2, only used for HREFP_V20 boards */ -static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = { - .hwreq = true, -}; - /* * AB8500 external regulators */ @@ -526,456 +455,6 @@ static struct regulator_init_data ab8500_ext_regulators[] = { }, }; -/* ab8505 regulator register initialization */ -static struct ab8500_regulator_reg_init ab8505_reg_init[] = { - /* - * VarmRequestCtrl - * VsmpsCRequestCtrl - * VsmpsARequestCtrl - * VsmpsBRequestCtrl - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00), - /* - * VsafeRequestCtrl - * VpllRequestCtrl - * VanaRequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00), - /* - * Vaux1RequestCtrl = HP/LP depending on VxRequest - * Vaux2RequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00), - /* - * Vaux3RequestCtrl = HP/LP depending on VxRequest - * SwHPReq = Control through SWValid disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00), - /* - * VsmpsASysClkReq1HPValid - * VsmpsBSysClkReq1HPValid - * VsafeSysClkReq1HPValid - * VanaSysClkReq1HPValid = disabled - * VpllSysClkReq1HPValid - * Vaux1SysClkReq1HPValid = disabled - * Vaux2SysClkReq1HPValid = disabled - * Vaux3SysClkReq1HPValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), - /* - * VsmpsCSysClkReq1HPValid - * VarmSysClkReq1HPValid - * VbbSysClkReq1HPValid - * VsmpsMSysClkReq1HPValid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00), - /* - * VsmpsAHwHPReq1Valid - * VsmpsBHwHPReq1Valid - * VsafeHwHPReq1Valid - * VanaHwHPReq1Valid = disabled - * VpllHwHPReq1Valid - * Vaux1HwHPreq1Valid = disabled - * Vaux2HwHPReq1Valid = disabled - * Vaux3HwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00), - /* - * VsmpsMHwHPReq1Valid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00), - /* - * VsmpsAHwHPReq2Valid - * VsmpsBHwHPReq2Valid - * VsafeHwHPReq2Valid - * VanaHwHPReq2Valid = disabled - * VpllHwHPReq2Valid - * Vaux1HwHPReq2Valid = disabled - * Vaux2HwHPReq2Valid = disabled - * Vaux3HwHPReq2Valid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00), - /* - * VsmpsMHwHPReq2Valid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00), - /** - * VsmpsCSwHPReqValid - * VarmSwHPReqValid - * VsmpsASwHPReqValid - * VsmpsBSwHPReqValid - * VsafeSwHPReqValid - * VanaSwHPReqValid - * VanaSwHPReqValid = disabled - * VpllSwHPReqValid - * Vaux1SwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00), - /* - * Vaux2SwHPReqValid = disabled - * Vaux3SwHPReqValid = disabled - * VsmpsMSwHPReqValid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00), - /* - * SysClkReq2Valid1 = SysClkReq2 controlled - * SysClkReq3Valid1 = disabled - * SysClkReq4Valid1 = SysClkReq4 controlled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a), - /* - * SysClkReq2Valid2 = disabled - * SysClkReq3Valid2 = disabled - * SysClkReq4Valid2 = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00), - /* - * Vaux4SwHPReqValid - * Vaux4HwHPReq2Valid - * Vaux4HwHPReq1Valid - * Vaux4SysClkReq1HPValid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00), - /* - * VadcEna = disabled - * VintCore12Ena = disabled - * VintCore12Sel = 1.25 V - * VintCore12LP = inactive (HP) - * VadcLP = inactive (HP) - */ - INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10), - /* - * VaudioEna = disabled - * Vaux8Ena = disabled - * Vamic1Ena = disabled - * Vamic2Ena = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00), - /* - * Vamic1_dzout = high-Z when Vamic1 is disabled - * Vamic2_dzout = high-Z when Vamic2 is disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00), - /* - * VsmpsARegu - * VsmpsASelCtrl - * VsmpsAAutoMode - * VsmpsAPWMMode - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00), - /* - * VsmpsBRegu - * VsmpsBSelCtrl - * VsmpsBAutoMode - * VsmpsBPWMMode - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00), - /* - * VsafeRegu - * VsafeSelCtrl - * VsafeAutoMode - * VsafePWMMode - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00), - /* - * VPll = Hw controlled (NOTE! PRCMU bits) - * VanaRegu = force off - */ - INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02), - /* - * VextSupply1Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) - * VextSupply2Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) - * VextSupply3Regu = force OFF (OTP_ExtSupply3LPnPolarity 0) - * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 - * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 - */ - INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU, 0xff, 0x30), - /* - * Vaux1Regu = force HP - * Vaux2Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01), - /* - * Vaux3Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00), - /* - * VsmpsASel1 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00), - /* - * VsmpsASel2 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00), - /* - * VsmpsASel3 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00), - /* - * VsmpsBSel1 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00), - /* - * VsmpsBSel2 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00), - /* - * VsmpsBSel3 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00), - /* - * VsafeSel1 - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00), - /* - * VsafeSel2 - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00), - /* - * VsafeSel3 - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00), - /* - * Vaux1Sel = 2.8 V - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C), - /* - * Vaux2Sel = 2.9 V - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d), - /* - * Vaux3Sel = 2.91 V - */ - INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07), - /* - * Vaux4RequestCtrl - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00), - /* - * Vaux4Regu - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00), - /* - * Vaux4Sel - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00), - /* - * Vaux1Disch = short discharge time - * Vaux2Disch = short discharge time - * Vaux3Disch = short discharge time - * Vintcore12Disch = short discharge time - * VTVoutDisch = short discharge time - * VaudioDisch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00), - /* - * VanaDisch = short discharge time - * Vaux8PullDownEna = pulldown disabled when Vaux8 is disabled - * Vaux8Disch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00), - /* - * Vaux4Disch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00), - /* - * Vaux5Sel - * Vaux5LP - * Vaux5Ena - * Vaux5Disch - * Vaux5DisSfst - * Vaux5DisPulld - */ - INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00), - /* - * Vaux6Sel - * Vaux6LP - * Vaux6Ena - * Vaux6DisPulld - */ - INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00), -}; - -static struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { - /* supplies to the display/camera */ - [AB8505_LDO_AUX1] = { - .constraints = { - .name = "V-DISPLAY", - .min_uV = 2800000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, /* display is on at boot */ - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), - .consumer_supplies = ab8500_vaux1_consumers, - }, - /* supplies to the on-board eMMC */ - [AB8505_LDO_AUX2] = { - .constraints = { - .name = "V-eMMC1", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), - .consumer_supplies = ab8500_vaux2_consumers, - }, - /* supply for VAUX3, supplies to SDcard slots */ - [AB8505_LDO_AUX3] = { - .constraints = { - .name = "V-MMC-SD", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), - .consumer_supplies = ab8500_vaux3_consumers, - }, - /* supply for VAUX4, supplies to NFC and standalone secure element */ - [AB8505_LDO_AUX4] = { - .constraints = { - .name = "V-NFC-SE", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers), - .consumer_supplies = ab8505_vaux4_consumers, - }, - /* supply for VAUX5, supplies to TBD */ - [AB8505_LDO_AUX5] = { - .constraints = { - .name = "V-AUX5", - .min_uV = 1050000, - .max_uV = 2790000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers), - .consumer_supplies = ab8505_vaux5_consumers, - }, - /* supply for VAUX6, supplies to TBD */ - [AB8505_LDO_AUX6] = { - .constraints = { - .name = "V-AUX6", - .min_uV = 1050000, - .max_uV = 2790000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers), - .consumer_supplies = ab8505_vaux6_consumers, - }, - /* supply for gpadc, ADC LDO */ - [AB8505_LDO_ADC] = { - .constraints = { - .name = "V-ADC", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers), - .consumer_supplies = ab8505_vadc_consumers, - }, - /* supply for ab8500-vaudio, VAUDIO LDO */ - [AB8505_LDO_AUDIO] = { - .constraints = { - .name = "V-AUD", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), - .consumer_supplies = ab8500_vaud_consumers, - }, - /* supply for v-anamic1 VAMic1-LDO */ - [AB8505_LDO_ANAMIC1] = { - .constraints = { - .name = "V-AMIC1", - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), - .consumer_supplies = ab8500_vamic1_consumers, - }, - /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ - [AB8505_LDO_ANAMIC2] = { - .constraints = { - .name = "V-AMIC2", - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), - .consumer_supplies = ab8500_vamic2_consumers, - }, - /* supply for v-aux8, VAUX8 LDO */ - [AB8505_LDO_AUX8] = { - .constraints = { - .name = "V-AUX8", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers), - .consumer_supplies = ab8505_vaux8_consumers, - }, - /* supply for v-intcore12, VINTCORE12 LDO */ - [AB8505_LDO_INTCORE] = { - .constraints = { - .name = "V-INTCORE", - .min_uV = 1250000, - .max_uV = 1350000, - .input_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE | - REGULATOR_CHANGE_DRMS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), - .consumer_supplies = ab8500_vintcore_consumers, - }, - /* supply for LDO USB */ - [AB8505_LDO_USB] = { - .constraints = { - .name = "V-USB", - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers), - .consumer_supplies = ab8505_usb_consumers, - }, - /* supply for U8500 CSI-DSI, VANA LDO */ - [AB8505_LDO_ANA] = { - .constraints = { - .name = "V-CSI-DSI", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), - .consumer_supplies = ab8500_vana_consumers, - }, -}; - struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { .reg_init = ab8500_reg_init, .num_reg_init = ARRAY_SIZE(ab8500_reg_init), @@ -984,82 +463,3 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { .ext_regulator = ab8500_ext_regulators, .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), }; - -struct ab8500_regulator_platform_data ab8505_regulator_plat_data = { - .reg_init = ab8505_reg_init, - .num_reg_init = ARRAY_SIZE(ab8505_reg_init), - .regulator = ab8505_regulators, - .num_regulator = ARRAY_SIZE(ab8505_regulators), -}; - -static void ab8500_modify_reg_init(int id, u8 mask, u8 value) -{ - int i; - - if (cpu_is_u8520()) { - for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) { - if (ab8505_reg_init[i].id == id) { - u8 initval = ab8505_reg_init[i].value; - initval = (initval & ~mask) | (value & mask); - ab8505_reg_init[i].value = initval; - - BUG_ON(mask & ~ab8505_reg_init[i].mask); - return; - } - } - } else { - for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) { - if (ab8500_reg_init[i].id == id) { - u8 initval = ab8500_reg_init[i].value; - initval = (initval & ~mask) | (value & mask); - ab8500_reg_init[i].value = initval; - - BUG_ON(mask & ~ab8500_reg_init[i].mask); - return; - } - } - } - - BUG_ON(1); -} - -void mop500_regulator_init(void) -{ - struct regulator_init_data *regulator; - - /* - * Temporarily turn on Vaux2 on 8520 machine - */ - if (cpu_is_u8520()) { - /* Vaux2 initialized to be on */ - ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05); - } - - /* - * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for - * all HREFP_V20 boards) - */ - if (cpu_is_u8500v20()) { - /* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */ - ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01); - - /* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */ - ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2, - 0x20, 0x20); - - /* VextSupply2 = force HP at initialization */ - ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04); - - /* enable VextSupply2 during platform active */ - regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; - regulator->constraints.always_on = 1; - - /* disable VextSupply2 in suspend */ - regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; - regulator->constraints.state_mem.disabled = 1; - regulator->constraints.state_standby.disabled = 1; - - /* enable VextSupply2 HW control (used in suspend) */ - regulator->driver_data = (void *)&ab8500_ext_supply2; - } -} diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 9bece38fe933..3bbb0831b0cf 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -11,14 +11,6 @@ #ifndef __BOARD_MOP500_REGULATORS_H #define __BOARD_MOP500_REGULATORS_H -#include -#include - extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; -extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; -extern struct regulator_init_data tps61052_regulator; -extern struct regulator_init_data gpio_en_3v3_regulator; - -void mop500_regulator_init(void); #endif From 79886be09751c543155608036134b9948288bfc3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 18 Mar 2016 16:21:36 +0100 Subject: [PATCH 02/11] ARM: ux500: move ab8500_regulator_plat_data into driver There is only one instance of ab8500_regulator_platform_data, and it's safe to assume we won't ever merge another one, so it's rather pointless to pass it through multiple levels of platform data pointers. This moves the structure and everything referenced by it into the driver that uses it. Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Makefile | 3 +- arch/arm/mach-ux500/board-mop500-regulators.c | 465 ------------------ arch/arm/mach-ux500/board-mop500-regulators.h | 16 - arch/arm/mach-ux500/cpu-db8500.c | 2 - drivers/regulator/ab8500-ext.c | 465 +++++++++++++++++- 5 files changed, 452 insertions(+), 499 deletions(-) delete mode 100644 arch/arm/mach-ux500/board-mop500-regulators.c delete mode 100644 arch/arm/mach-ux500/board-mop500-regulators.h diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index edfff1ae1f8d..ea8893fd128f 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -5,8 +5,7 @@ obj-y := cpu.o id.o pm.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o -obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \ - board-mop500-audio.o +obj-$(CONFIG_MACH_MOP500) += board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c deleted file mode 100644 index eff141ddeea5..000000000000 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ /dev/null @@ -1,465 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * - * Authors: Sundar Iyer - * Bengt Jonsson - * Daniel Willerud - * - * MOP500 board specific initialization for regulators - */ -#include -#include -#include -#include "board-mop500-regulators.h" - -static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { - /* Main display, u8500 R3 uib */ - REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"), - /* Main display, u8500 uib and ST uib */ - REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"), - /* Secondary display, ST uib */ - REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"), - /* SFH7741 proximity sensor */ - REGULATOR_SUPPLY("vcc", "gpio-keys.0"), - /* BH1780GLS ambient light sensor */ - REGULATOR_SUPPLY("vcc", "2-0029"), - /* lsm303dlh accelerometer */ - REGULATOR_SUPPLY("vdd", "2-0018"), - /* lsm303dlhc accelerometer */ - REGULATOR_SUPPLY("vdd", "2-0019"), - /* lsm303dlh magnetometer */ - REGULATOR_SUPPLY("vdd", "2-001e"), - /* Rohm BU21013 Touchscreen devices */ - REGULATOR_SUPPLY("avdd", "3-005c"), - REGULATOR_SUPPLY("avdd", "3-005d"), - /* Synaptics RMI4 Touchscreen device */ - REGULATOR_SUPPLY("vdd", "3-004b"), - /* L3G4200D Gyroscope device */ - REGULATOR_SUPPLY("vdd", "2-0068"), - /* Ambient light sensor device */ - REGULATOR_SUPPLY("vdd", "3-0029"), - /* Pressure sensor device */ - REGULATOR_SUPPLY("vdd", "2-005c"), - /* Cypress TrueTouch Touchscreen device */ - REGULATOR_SUPPLY("vcpin", "spi8.0"), - /* Camera device */ - REGULATOR_SUPPLY("vaux12v5", "mmio_camera"), -}; - -static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { - /* On-board eMMC power */ - REGULATOR_SUPPLY("vmmc", "sdi4"), - /* AB8500 audio codec */ - REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), - /* AB8500 accessory detect 1 */ - REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"), - /* AB8500 Tv-out device */ - REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"), - /* AV8100 HDMI device */ - REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"), -}; - -static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { - REGULATOR_SUPPLY("v-SD-STM", "stm"), - /* External MMC slot power */ - REGULATOR_SUPPLY("vmmc", "sdi0"), -}; - -static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { - /* TV-out DENC supply */ - REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), - /* Internal general-purpose ADC */ - REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), - /* ADC for charger */ - REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), - /* AB8500 Tv-out device */ - REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"), -}; - -static struct regulator_consumer_supply ab8500_vaud_consumers[] = { - /* AB8500 audio-codec main supply */ - REGULATOR_SUPPLY("vaud", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vamic1_consumers[] = { - /* AB8500 audio-codec Mic1 supply */ - REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vamic2_consumers[] = { - /* AB8500 audio-codec Mic2 supply */ - REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vdmic_consumers[] = { - /* AB8500 audio-codec DMic supply */ - REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { - /* SoC core supply, no device */ - REGULATOR_SUPPLY("v-intcore", NULL), - /* USB Transceiver */ - REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), - /* Handled by abx500 clk driver */ - REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), -}; - -static struct regulator_consumer_supply ab8500_vana_consumers[] = { - /* DB8500 DSI */ - REGULATOR_SUPPLY("vdddsi1v2", "mcde"), - REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"), - REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"), - REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"), - REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"), - REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"), - /* DB8500 CSI */ - REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"), -}; - -/* ab8500 regulator register initialization */ -static struct ab8500_regulator_reg_init ab8500_reg_init[] = { - /* - * VanaRequestCtrl = HP/LP depending on VxRequest - * VextSupply1RequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00), - /* - * VextSupply2RequestCtrl = HP/LP depending on VxRequest - * VextSupply3RequestCtrl = HP/LP depending on VxRequest - * Vaux1RequestCtrl = HP/LP depending on VxRequest - * Vaux2RequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00), - /* - * Vaux3RequestCtrl = HP/LP depending on VxRequest - * SwHPReq = Control through SWValid disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), - /* - * VanaSysClkReq1HPValid = disabled - * Vaux1SysClkReq1HPValid = disabled - * Vaux2SysClkReq1HPValid = disabled - * Vaux3SysClkReq1HPValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), - /* - * VextSupply1SysClkReq1HPValid = disabled - * VextSupply2SysClkReq1HPValid = disabled - * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40), - /* - * VanaHwHPReq1Valid = disabled - * Vaux1HwHPreq1Valid = disabled - * Vaux2HwHPReq1Valid = disabled - * Vaux3HwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00), - /* - * VextSupply1HwHPReq1Valid = disabled - * VextSupply2HwHPReq1Valid = disabled - * VextSupply3HwHPReq1Valid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00), - /* - * VanaHwHPReq2Valid = disabled - * Vaux1HwHPReq2Valid = disabled - * Vaux2HwHPReq2Valid = disabled - * Vaux3HwHPReq2Valid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00), - /* - * VextSupply1HwHPReq2Valid = disabled - * VextSupply2HwHPReq2Valid = disabled - * VextSupply3HwHPReq2Valid = HWReq2 controlled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04), - /* - * VanaSwHPReqValid = disabled - * Vaux1SwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00), - /* - * Vaux2SwHPReqValid = disabled - * Vaux3SwHPReqValid = disabled - * VextSupply1SwHPReqValid = disabled - * VextSupply2SwHPReqValid = disabled - * VextSupply3SwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00), - /* - * SysClkReq2Valid1 = SysClkReq2 controlled - * SysClkReq3Valid1 = disabled - * SysClkReq4Valid1 = SysClkReq4 controlled - * SysClkReq5Valid1 = disabled - * SysClkReq6Valid1 = SysClkReq6 controlled - * SysClkReq7Valid1 = disabled - * SysClkReq8Valid1 = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a), - /* - * SysClkReq2Valid2 = disabled - * SysClkReq3Valid2 = disabled - * SysClkReq4Valid2 = disabled - * SysClkReq5Valid2 = disabled - * SysClkReq6Valid2 = SysClkReq6 controlled - * SysClkReq7Valid2 = disabled - * SysClkReq8Valid2 = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20), - /* - * VTVoutEna = disabled - * Vintcore12Ena = disabled - * Vintcore12Sel = 1.25 V - * Vintcore12LP = inactive (HP) - * VTVoutLP = inactive (HP) - */ - INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10), - /* - * VaudioEna = disabled - * VdmicEna = disabled - * Vamic1Ena = disabled - * Vamic2Ena = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00), - /* - * Vamic1_dzout = high-Z when Vamic1 is disabled - * Vamic2_dzout = high-Z when Vamic2 is disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), - /* - * VPll = Hw controlled (NOTE! PRCMU bits) - * VanaRegu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), - /* - * VrefDDREna = disabled - * VrefDDRSleepMode = inactive (no pulldown) - */ - INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), - /* - * VextSupply1Regu = force LP - * VextSupply2Regu = force OFF - * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP) - * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 - * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 - */ - INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13), - /* - * Vaux1Regu = force HP - * Vaux2Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), - /* - * Vaux3Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), - /* - * Vaux1Sel = 2.8 V - */ - INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C), - /* - * Vaux2Sel = 2.9 V - */ - INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d), - /* - * Vaux3Sel = 2.91 V - */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07), - /* - * VextSupply12LP = disabled (no LP) - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00), - /* - * Vaux1Disch = short discharge time - * Vaux2Disch = short discharge time - * Vaux3Disch = short discharge time - * Vintcore12Disch = short discharge time - * VTVoutDisch = short discharge time - * VaudioDisch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00), - /* - * VanaDisch = short discharge time - * VdmicPullDownEna = pulldown disabled when Vdmic is disabled - * VdmicDisch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00), -}; - -/* AB8500 regulators */ -static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { - /* supplies to the display/camera */ - [AB8500_LDO_AUX1] = { - .supply_regulator = "ab8500-ext-supply3", - .constraints = { - .name = "V-DISPLAY", - .min_uV = 2800000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, /* display is on at boot */ - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), - .consumer_supplies = ab8500_vaux1_consumers, - }, - /* supplies to the on-board eMMC */ - [AB8500_LDO_AUX2] = { - .supply_regulator = "ab8500-ext-supply3", - .constraints = { - .name = "V-eMMC1", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), - .consumer_supplies = ab8500_vaux2_consumers, - }, - /* supply for VAUX3, supplies to SDcard slots */ - [AB8500_LDO_AUX3] = { - .supply_regulator = "ab8500-ext-supply3", - .constraints = { - .name = "V-MMC-SD", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), - .consumer_supplies = ab8500_vaux3_consumers, - }, - /* supply for tvout, gpadc, TVOUT LDO */ - [AB8500_LDO_TVOUT] = { - .constraints = { - .name = "V-TVOUT", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers), - .consumer_supplies = ab8500_vtvout_consumers, - }, - /* supply for ab8500-vaudio, VAUDIO LDO */ - [AB8500_LDO_AUDIO] = { - .constraints = { - .name = "V-AUD", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), - .consumer_supplies = ab8500_vaud_consumers, - }, - /* supply for v-anamic1 VAMic1-LDO */ - [AB8500_LDO_ANAMIC1] = { - .constraints = { - .name = "V-AMIC1", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), - .consumer_supplies = ab8500_vamic1_consumers, - }, - /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ - [AB8500_LDO_ANAMIC2] = { - .constraints = { - .name = "V-AMIC2", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), - .consumer_supplies = ab8500_vamic2_consumers, - }, - /* supply for v-dmic, VDMIC LDO */ - [AB8500_LDO_DMIC] = { - .constraints = { - .name = "V-DMIC", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers), - .consumer_supplies = ab8500_vdmic_consumers, - }, - /* supply for v-intcore12, VINTCORE12 LDO */ - [AB8500_LDO_INTCORE] = { - .constraints = { - .name = "V-INTCORE", - .min_uV = 1250000, - .max_uV = 1350000, - .input_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE | - REGULATOR_CHANGE_DRMS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), - .consumer_supplies = ab8500_vintcore_consumers, - }, - /* supply for U8500 CSI-DSI, VANA LDO */ - [AB8500_LDO_ANA] = { - .constraints = { - .name = "V-CSI-DSI", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), - .consumer_supplies = ab8500_vana_consumers, - }, -}; - -/* supply for VextSupply3 */ -static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { - /* SIM supply for 3 V SIM cards */ - REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), -}; - -/* - * AB8500 external regulators - */ -static struct regulator_init_data ab8500_ext_regulators[] = { - /* fixed Vbat supplies VSMPS1_EXT_1V8 */ - [AB8500_EXT_SUPPLY1] = { - .constraints = { - .name = "ab8500-ext-supply1", - .min_uV = 1800000, - .max_uV = 1800000, - .initial_mode = REGULATOR_MODE_IDLE, - .boot_on = 1, - .always_on = 1, - }, - }, - /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */ - [AB8500_EXT_SUPPLY2] = { - .constraints = { - .name = "ab8500-ext-supply2", - .min_uV = 1360000, - .max_uV = 1360000, - }, - }, - /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */ - [AB8500_EXT_SUPPLY3] = { - .constraints = { - .name = "ab8500-ext-supply3", - .min_uV = 3400000, - .max_uV = 3400000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = - ARRAY_SIZE(ab8500_ext_supply3_consumers), - .consumer_supplies = ab8500_ext_supply3_consumers, - }, -}; - -struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { - .reg_init = ab8500_reg_init, - .num_reg_init = ARRAY_SIZE(ab8500_reg_init), - .regulator = ab8500_regulators, - .num_regulator = ARRAY_SIZE(ab8500_regulators), - .ext_regulator = ab8500_ext_regulators, - .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), -}; diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h deleted file mode 100644 index 3bbb0831b0cf..000000000000 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * - * Author: Bengt Jonsson for ST-Ericsson - * - * MOP500 board specific initialization for regulators - */ - -#ifndef __BOARD_MOP500_REGULATORS_H -#define __BOARD_MOP500_REGULATORS_H - -extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; - -#endif diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index a557955472ea..c015ef8dd535 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -28,13 +28,11 @@ #include "setup.h" -#include "board-mop500-regulators.h" #include "board-mop500.h" #include "db8500-regs.h" #include "id.h" static struct ab8500_platform_data ab8500_platdata = { - .regulator = &ab8500_regulator_plat_data, }; static struct prcmu_pdata db8500_prcmu_pdata = { diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c index 84c1ee39ddae..2ca00045eb99 100644 --- a/drivers/regulator/ab8500-ext.c +++ b/drivers/regulator/ab8500-ext.c @@ -25,6 +25,456 @@ #include #include +static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { + /* Main display, u8500 R3 uib */ + REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"), + /* Main display, u8500 uib and ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"), + /* Secondary display, ST uib */ + REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"), + /* SFH7741 proximity sensor */ + REGULATOR_SUPPLY("vcc", "gpio-keys.0"), + /* BH1780GLS ambient light sensor */ + REGULATOR_SUPPLY("vcc", "2-0029"), + /* lsm303dlh accelerometer */ + REGULATOR_SUPPLY("vdd", "2-0018"), + /* lsm303dlhc accelerometer */ + REGULATOR_SUPPLY("vdd", "2-0019"), + /* lsm303dlh magnetometer */ + REGULATOR_SUPPLY("vdd", "2-001e"), + /* Rohm BU21013 Touchscreen devices */ + REGULATOR_SUPPLY("avdd", "3-005c"), + REGULATOR_SUPPLY("avdd", "3-005d"), + /* Synaptics RMI4 Touchscreen device */ + REGULATOR_SUPPLY("vdd", "3-004b"), + /* L3G4200D Gyroscope device */ + REGULATOR_SUPPLY("vdd", "2-0068"), + /* Ambient light sensor device */ + REGULATOR_SUPPLY("vdd", "3-0029"), + /* Pressure sensor device */ + REGULATOR_SUPPLY("vdd", "2-005c"), + /* Cypress TrueTouch Touchscreen device */ + REGULATOR_SUPPLY("vcpin", "spi8.0"), + /* Camera device */ + REGULATOR_SUPPLY("vaux12v5", "mmio_camera"), +}; + +static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { + /* On-board eMMC power */ + REGULATOR_SUPPLY("vmmc", "sdi4"), + /* AB8500 audio codec */ + REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), + /* AB8500 accessory detect 1 */ + REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"), + /* AV8100 HDMI device */ + REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"), +}; + +static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { + REGULATOR_SUPPLY("v-SD-STM", "stm"), + /* External MMC slot power */ + REGULATOR_SUPPLY("vmmc", "sdi0"), +}; + +static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { + /* TV-out DENC supply */ + REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), + /* Internal general-purpose ADC */ + REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), + /* ADC for charger */ + REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), + /* AB8500 Tv-out device */ + REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"), +}; + +static struct regulator_consumer_supply ab8500_vaud_consumers[] = { + /* AB8500 audio-codec main supply */ + REGULATOR_SUPPLY("vaud", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vamic1_consumers[] = { + /* AB8500 audio-codec Mic1 supply */ + REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vamic2_consumers[] = { + /* AB8500 audio-codec Mic2 supply */ + REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vdmic_consumers[] = { + /* AB8500 audio-codec DMic supply */ + REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"), +}; + +static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { + /* SoC core supply, no device */ + REGULATOR_SUPPLY("v-intcore", NULL), + /* USB Transceiver */ + REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), + /* Handled by abx500 clk driver */ + REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), +}; + +static struct regulator_consumer_supply ab8500_vana_consumers[] = { + /* DB8500 DSI */ + REGULATOR_SUPPLY("vdddsi1v2", "mcde"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"), + REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"), + REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"), + /* DB8500 CSI */ + REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"), +}; + +/* ab8500 regulator register initialization */ +static struct ab8500_regulator_reg_init ab8500_reg_init[] = { + /* + * VanaRequestCtrl = HP/LP depending on VxRequest + * VextSupply1RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00), + /* + * VextSupply2RequestCtrl = HP/LP depending on VxRequest + * VextSupply3RequestCtrl = HP/LP depending on VxRequest + * Vaux1RequestCtrl = HP/LP depending on VxRequest + * Vaux2RequestCtrl = HP/LP depending on VxRequest + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00), + /* + * Vaux3RequestCtrl = HP/LP depending on VxRequest + * SwHPReq = Control through SWValid disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), + /* + * VanaSysClkReq1HPValid = disabled + * Vaux1SysClkReq1HPValid = disabled + * Vaux2SysClkReq1HPValid = disabled + * Vaux3SysClkReq1HPValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), + /* + * VextSupply1SysClkReq1HPValid = disabled + * VextSupply2SysClkReq1HPValid = disabled + * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40), + /* + * VanaHwHPReq1Valid = disabled + * Vaux1HwHPreq1Valid = disabled + * Vaux2HwHPReq1Valid = disabled + * Vaux3HwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00), + /* + * VextSupply1HwHPReq1Valid = disabled + * VextSupply2HwHPReq1Valid = disabled + * VextSupply3HwHPReq1Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00), + /* + * VanaHwHPReq2Valid = disabled + * Vaux1HwHPReq2Valid = disabled + * Vaux2HwHPReq2Valid = disabled + * Vaux3HwHPReq2Valid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00), + /* + * VextSupply1HwHPReq2Valid = disabled + * VextSupply2HwHPReq2Valid = disabled + * VextSupply3HwHPReq2Valid = HWReq2 controlled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04), + /* + * VanaSwHPReqValid = disabled + * Vaux1SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00), + /* + * Vaux2SwHPReqValid = disabled + * Vaux3SwHPReqValid = disabled + * VextSupply1SwHPReqValid = disabled + * VextSupply2SwHPReqValid = disabled + * VextSupply3SwHPReqValid = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00), + /* + * SysClkReq2Valid1 = SysClkReq2 controlled + * SysClkReq3Valid1 = disabled + * SysClkReq4Valid1 = SysClkReq4 controlled + * SysClkReq5Valid1 = disabled + * SysClkReq6Valid1 = SysClkReq6 controlled + * SysClkReq7Valid1 = disabled + * SysClkReq8Valid1 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a), + /* + * SysClkReq2Valid2 = disabled + * SysClkReq3Valid2 = disabled + * SysClkReq4Valid2 = disabled + * SysClkReq5Valid2 = disabled + * SysClkReq6Valid2 = SysClkReq6 controlled + * SysClkReq7Valid2 = disabled + * SysClkReq8Valid2 = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20), + /* + * VTVoutEna = disabled + * Vintcore12Ena = disabled + * Vintcore12Sel = 1.25 V + * Vintcore12LP = inactive (HP) + * VTVoutLP = inactive (HP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10), + /* + * VaudioEna = disabled + * VdmicEna = disabled + * Vamic1Ena = disabled + * Vamic2Ena = disabled + */ + INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00), + /* + * Vamic1_dzout = high-Z when Vamic1 is disabled + * Vamic2_dzout = high-Z when Vamic2 is disabled + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), + /* + * VPll = Hw controlled (NOTE! PRCMU bits) + * VanaRegu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), + /* + * VrefDDREna = disabled + * VrefDDRSleepMode = inactive (no pulldown) + */ + INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), + /* + * VextSupply1Regu = force LP + * VextSupply2Regu = force OFF + * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP) + * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 + * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 + */ + INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13), + /* + * Vaux1Regu = force HP + * Vaux2Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), + /* + * Vaux3Regu = force off + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), + /* + * Vaux1Sel = 2.8 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C), + /* + * Vaux2Sel = 2.9 V + */ + INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d), + /* + * Vaux3Sel = 2.91 V + */ + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07), + /* + * VextSupply12LP = disabled (no LP) + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00), + /* + * Vaux1Disch = short discharge time + * Vaux2Disch = short discharge time + * Vaux3Disch = short discharge time + * Vintcore12Disch = short discharge time + * VTVoutDisch = short discharge time + * VaudioDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00), + /* + * VanaDisch = short discharge time + * VdmicPullDownEna = pulldown disabled when Vdmic is disabled + * VdmicDisch = short discharge time + */ + INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00), +}; + +/* AB8500 regulators */ +static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { + /* supplies to the display/camera */ + [AB8500_LDO_AUX1] = { + .supply_regulator = "ab8500-ext-supply3", + .constraints = { + .name = "V-DISPLAY", + .min_uV = 2800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, /* display is on at boot */ + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), + .consumer_supplies = ab8500_vaux1_consumers, + }, + /* supplies to the on-board eMMC */ + [AB8500_LDO_AUX2] = { + .supply_regulator = "ab8500-ext-supply3", + .constraints = { + .name = "V-eMMC1", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), + .consumer_supplies = ab8500_vaux2_consumers, + }, + /* supply for VAUX3, supplies to SDcard slots */ + [AB8500_LDO_AUX3] = { + .supply_regulator = "ab8500-ext-supply3", + .constraints = { + .name = "V-MMC-SD", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), + .consumer_supplies = ab8500_vaux3_consumers, + }, + /* supply for tvout, gpadc, TVOUT LDO */ + [AB8500_LDO_TVOUT] = { + .constraints = { + .name = "V-TVOUT", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers), + .consumer_supplies = ab8500_vtvout_consumers, + }, + /* supply for ab8500-vaudio, VAUDIO LDO */ + [AB8500_LDO_AUDIO] = { + .constraints = { + .name = "V-AUD", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), + .consumer_supplies = ab8500_vaud_consumers, + }, + /* supply for v-anamic1 VAMic1-LDO */ + [AB8500_LDO_ANAMIC1] = { + .constraints = { + .name = "V-AMIC1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), + .consumer_supplies = ab8500_vamic1_consumers, + }, + /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ + [AB8500_LDO_ANAMIC2] = { + .constraints = { + .name = "V-AMIC2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), + .consumer_supplies = ab8500_vamic2_consumers, + }, + /* supply for v-dmic, VDMIC LDO */ + [AB8500_LDO_DMIC] = { + .constraints = { + .name = "V-DMIC", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers), + .consumer_supplies = ab8500_vdmic_consumers, + }, + /* supply for v-intcore12, VINTCORE12 LDO */ + [AB8500_LDO_INTCORE] = { + .constraints = { + .name = "V-INTCORE", + .min_uV = 1250000, + .max_uV = 1350000, + .input_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_MODE | + REGULATOR_CHANGE_DRMS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_IDLE, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), + .consumer_supplies = ab8500_vintcore_consumers, + }, + /* supply for U8500 CSI-DSI, VANA LDO */ + [AB8500_LDO_ANA] = { + .constraints = { + .name = "V-CSI-DSI", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), + .consumer_supplies = ab8500_vana_consumers, + }, +}; + +/* supply for VextSupply3 */ +static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { + /* SIM supply for 3 V SIM cards */ + REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), +}; + +/* + * AB8500 external regulators + */ +static struct regulator_init_data ab8500_ext_regulators[] = { + /* fixed Vbat supplies VSMPS1_EXT_1V8 */ + [AB8500_EXT_SUPPLY1] = { + .constraints = { + .name = "ab8500-ext-supply1", + .min_uV = 1800000, + .max_uV = 1800000, + .initial_mode = REGULATOR_MODE_IDLE, + .boot_on = 1, + .always_on = 1, + }, + }, + /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */ + [AB8500_EXT_SUPPLY2] = { + .constraints = { + .name = "ab8500-ext-supply2", + .min_uV = 1360000, + .max_uV = 1360000, + }, + }, + /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */ + [AB8500_EXT_SUPPLY3] = { + .constraints = { + .name = "ab8500-ext-supply3", + .min_uV = 3400000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = + ARRAY_SIZE(ab8500_ext_supply3_consumers), + .consumer_supplies = ab8500_ext_supply3_consumers, + }, +}; + +static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { + .reg_init = ab8500_reg_init, + .num_reg_init = ARRAY_SIZE(ab8500_reg_init), + .regulator = ab8500_regulators, + .num_regulator = ARRAY_SIZE(ab8500_regulators), + .ext_regulator = ab8500_ext_regulators, + .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), +}; + /** * struct ab8500_ext_regulator_info - ab8500 regulator information * @dev: device pointer @@ -344,8 +794,7 @@ static struct of_regulator_match ab8500_ext_regulator_match[] = { static int ab8500_ext_regulator_probe(struct platform_device *pdev) { struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); - struct ab8500_platform_data *ppdata; - struct ab8500_regulator_platform_data *pdata; + struct ab8500_regulator_platform_data *pdata = &ab8500_regulator_plat_data; struct device_node *np = pdev->dev.of_node; struct regulator_config config = { }; int i, err; @@ -366,18 +815,6 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev) return -EINVAL; } - ppdata = dev_get_platdata(ab8500->dev); - if (!ppdata) { - dev_err(&pdev->dev, "null parent pdata\n"); - return -EINVAL; - } - - pdata = ppdata->regulator; - if (!pdata) { - dev_err(&pdev->dev, "null pdata\n"); - return -EINVAL; - } - /* make sure the platform data has the correct size */ if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) { dev_err(&pdev->dev, "Configuration error: size mismatch.\n"); From cf4129ea212d71f7860bded25d42388265172bee Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 18 Mar 2016 16:50:33 +0100 Subject: [PATCH 03/11] ASoC: ab8500-codec: remove platform data based probe The ux500 platform hasn't used board files for a long time, and nothing defines a ab8500_codec_platform_data, so we can just remove the probing based on that and always use device tree properties directly. Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Signed-off-by: Linus Walleij --- sound/soc/codecs/ab8500-codec.c | 33 ++++----------------------------- 1 file changed, 4 insertions(+), 29 deletions(-) diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c index 8b1d0c1a7839..2fc89155f14a 100644 --- a/sound/soc/codecs/ab8500-codec.c +++ b/sound/soc/codecs/ab8500-codec.c @@ -2464,45 +2464,20 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec) struct device *dev = codec->dev; struct device_node *np = dev->of_node; struct ab8500_codec_drvdata *drvdata = dev_get_drvdata(dev); - struct ab8500_platform_data *pdata; + struct ab8500_codec_platform_data codec_pdata; struct filter_control *fc; int status; dev_dbg(dev, "%s: Enter.\n", __func__); - /* Setup AB8500 according to board-settings */ - pdata = dev_get_platdata(dev->parent); + ab8500_codec_of_probe(dev, np, &codec_pdata); - if (np) { - if (!pdata) - pdata = devm_kzalloc(dev, - sizeof(struct ab8500_platform_data), - GFP_KERNEL); - - if (pdata && !pdata->codec) - pdata->codec - = devm_kzalloc(dev, - sizeof(struct ab8500_codec_platform_data), - GFP_KERNEL); - - if (!(pdata && pdata->codec)) - return -ENOMEM; - - ab8500_codec_of_probe(dev, np, pdata->codec); - - } else { - if (!(pdata && pdata->codec)) { - dev_err(dev, "No codec platform data or DT found\n"); - return -EINVAL; - } - } - - status = ab8500_audio_setup_mics(codec, &pdata->codec->amics); + status = ab8500_audio_setup_mics(codec, &codec_pdata.amics); if (status < 0) { pr_err("%s: Failed to setup mics (%d)!\n", __func__, status); return status; } - status = ab8500_audio_set_ear_cmv(codec, pdata->codec->ear_cmv); + status = ab8500_audio_set_ear_cmv(codec, codec_pdata.ear_cmv); if (status < 0) { pr_err("%s: Failed to set earpiece CM-voltage (%d)!\n", __func__, status); From 4e657946cbf68998b51b331375a1209e90792fe4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 18 Mar 2016 16:53:31 +0100 Subject: [PATCH 04/11] mfd: db8500 stop passing around platform data Except for the constant DB8500_PRCMU_FW_VERSION_OFFSET number, nothing is ever passed through the platform data and used in a driver, so we can simply stop passing it around. Acked-by: Lee Jones Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 17 ++---------- arch/arm/mach-ux500/setup.h | 1 - drivers/mfd/ab8500-core.c | 4 --- drivers/mfd/ab8500-sysctrl.c | 34 ----------------------- drivers/mfd/db8500-prcmu.c | 10 ++----- include/linux/mfd/abx500/ab8500-sysctrl.h | 6 ---- include/linux/mfd/dbx500-prcmu.h | 10 ------- 7 files changed, 5 insertions(+), 77 deletions(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index c015ef8dd535..bbd1b4b8d441 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -16,8 +16,6 @@ #include #include #include -#include -#include #include #include #include @@ -32,15 +30,6 @@ #include "db8500-regs.h" #include "id.h" -static struct ab8500_platform_data ab8500_platdata = { -}; - -static struct prcmu_pdata db8500_prcmu_pdata = { - .ab_platdata = &ab8500_platdata, - .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, - .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, -}; - static void __init u8500_map_io(void) { debug_ll_io_init(); @@ -109,8 +98,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, "ux500-msp-i2s.3", &msp3_platform_data), /* Requires non-DT:able platform data. */ - OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", - &db8500_prcmu_pdata), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL), OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", @@ -119,8 +107,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { }; static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", - &db8500_prcmu_pdata), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL), {}, }; diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index c704254ab67c..e606847c8b58 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -13,7 +13,6 @@ #include #include -#include void ux500_restart(enum reboot_mode mode, const char *cmd); diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index f3d689176fc2..589eebfc13df 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1087,7 +1087,6 @@ static int ab8500_probe(struct platform_device *pdev) "Vbus Detect (USB)", "USB ID Detect", "UART Factory Mode Detect"}; - struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev); const struct platform_device_id *platid = platform_get_device_id(pdev); enum ab8500_version version = AB8500_VERSION_UNDEFINED; struct device_node *np = pdev->dev.of_node; @@ -1219,9 +1218,6 @@ static int ab8500_probe(struct platform_device *pdev) pr_cont("None\n"); } - if (plat && plat->init) - plat->init(ab8500); - if (is_ab9540(ab8500)) { ret = get_register_interruptible(ab8500, AB8500_CHARGER, AB8500_CH_USBCH_STAT1_REG, &value); diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index b9f0010309f9..207cc497958a 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -127,45 +127,11 @@ EXPORT_SYMBOL(ab8500_sysctrl_write); static int ab8500_sysctrl_probe(struct platform_device *pdev) { - struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); - struct ab8500_platform_data *plat; - struct ab8500_sysctrl_platform_data *pdata; - - plat = dev_get_platdata(pdev->dev.parent); - - if (!plat) - return -EINVAL; - sysctrl_dev = &pdev->dev; if (!pm_power_off) pm_power_off = ab8500_power_off; - pdata = plat->sysctrl; - if (pdata) { - int last, ret, i, j; - - if (is_ab8505(ab8500)) - last = AB8500_SYSCLKREQ4RFCLKBUF; - else - last = AB8500_SYSCLKREQ8RFCLKBUF; - - for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) { - j = i - AB8500_SYSCLKREQ1RFCLKBUF; - ret = ab8500_sysctrl_write(i, 0xff, - pdata->initial_req_buf_config[j]); - dev_dbg(&pdev->dev, - "Setting SysClkReq%dRfClkBuf 0x%X\n", - j + 1, - pdata->initial_req_buf_config[j]); - if (ret < 0) { - dev_err(&pdev->dev, - "Can't set sysClkReq%dRfClkBuf: %d\n", - j + 1, ret); - } - } - } - return 0; } diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index c0a86aeb1733..388e268b9bcf 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3094,8 +3094,7 @@ static void db8500_prcmu_update_cpufreq(void) } } -static int db8500_prcmu_register_ab8500(struct device *parent, - struct ab8500_platform_data *pdata) +static int db8500_prcmu_register_ab8500(struct device *parent) { struct device_node *np; struct resource ab8500_resource; @@ -3103,8 +3102,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent, .name = "ab8500-core", .of_compatible = "stericsson,ab8500", .id = AB8500_VERSION_AB8500, - .platform_data = pdata, - .pdata_size = sizeof(struct ab8500_platform_data), .resources = &ab8500_resource, .num_resources = 1, }; @@ -3133,7 +3130,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent, static int db8500_prcmu_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev); int irq = 0, err = 0; struct resource *res; @@ -3149,7 +3145,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev) return -ENOMEM; } init_prcm_registers(); - dbx500_fw_version_init(pdev, pdata->version_offset); + dbx500_fw_version_init(pdev, DB8500_PRCMU_FW_VERSION_OFFSET); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm"); if (!res) { dev_err(&pdev->dev, "no prcmu tcdm region provided\n"); @@ -3204,7 +3200,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev) } } - err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata); + err = db8500_prcmu_register_ab8500(&pdev->dev); if (err) { mfd_remove_devices(&pdev->dev); pr_err("prcmu: Failed to add ab8500 subdevice\n"); diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index 689312745b2f..01024d1aed0e 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -37,12 +37,6 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) return ab8500_sysctrl_write(reg, bits, 0); } -/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */ -struct ab8500_sysctrl_platform_data { - u8 initial_req_buf_config[8]; - u16 (*reboot_reason_code)(const char *cmd); -}; - /* Registers */ #define AB8500_TURNONSTATUS 0x100 #define AB8500_RESETSTATUS 0x101 diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index bf5109d38a26..5d374601404c 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -178,16 +178,6 @@ enum ddr_pwrst { #define DB8500_PRCMU_LEGACY_OFFSET 0xDD4 -struct prcmu_pdata -{ - bool enable_set_ddr_opp; - bool enable_ape_opp_100_voltage; - struct ab8500_platform_data *ab_platdata; - u32 version_offset; - u32 legacy_offset; - u32 adt_offset; -}; - #define PRCMU_FW_PROJECT_U8500 2 #define PRCMU_FW_PROJECT_U8400 3 #define PRCMU_FW_PROJECT_U9500 4 /* Customer specific */ From 1e6cbc0691abc6b1a053f98d8ce1d692c8c71501 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Jun 2016 22:27:23 +0200 Subject: [PATCH 05/11] ARM: ux500: move l2x0 init to .init_irq The generic IRQ init function also enables the l2 cache implicitly when the machine descriptor sets an .l2c_aux_mask. Let's use that on ux500 and remove the ux500_l2x0_init() along with the cpu_is_u8500_family checks. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cache-l2x0.c | 8 +------- arch/arm/mach-ux500/cpu-db8500.c | 3 ++- arch/arm/mach-ux500/cpu.c | 1 + arch/arm/mach-ux500/setup.h | 3 +++ 4 files changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 780bd13cd7e3..d7abc1187769 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -51,17 +51,11 @@ static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) */ } -static int __init ux500_l2x0_init(void) +void __init ux500_l2x0_init(void) { - /* Multiplatform guard */ - if (!((cpu_is_u8500_family() || cpu_is_ux540_family()))) - return -ENODEV; - /* Unlock before init */ ux500_l2x0_unlock(); outer_cache.write_sec = ux500_l2c310_write_sec; - l2x0_of_init(0, ~0); return 0; } -early_initcall(ux500_l2x0_init); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index bbd1b4b8d441..3874e9c236e9 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -141,10 +141,11 @@ static const char * stericsson_dt_platform_compat[] = { }; DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .map_io = u8500_map_io, .init_irq = ux500_init_irq, .init_machine = u8500_init_machine, - .init_late = NULL, .dt_compat = stericsson_dt_platform_compat, .restart = ux500_restart, MACHINE_END diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 82156cbc22ce..f8c2d6f2fb7e 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -65,6 +65,7 @@ void __init ux500_init_irq(void) } prcmu_early_init(r.start, r.end-r.start); ux500_pm_init(r.start, r.end-r.start); + ux500_l2x0_init(); /* * Init clocks here so that they are available for system timer diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index e606847c8b58..8b44b646b191 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -14,6 +14,9 @@ #include #include + +void ux500_l2x0_init(void); + void ux500_restart(enum reboot_mode mode, const char *cmd); void __init ux500_setup_id(void); From 269f1aac1410d27959bd073a089eb85eed55c8a1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Jun 2016 22:47:53 +0200 Subject: [PATCH 06/11] ARM: ux500: use CLK_OF_DECLARE() The ux500 DT support predates the CLK_OF_DECLARE macro and calls directly into the clk driver from platform code. Converting this to CLK_OF_DECLARE makes the code much nicer and similar to how modern platforms do it today. It also removes the last user of cpu_is_u8500_family() etc. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij --- MAINTAINERS | 1 - arch/arm/mach-ux500/cpu.c | 12 ------------ drivers/clk/ux500/u8500_of_clk.c | 16 ++-------------- drivers/clk/ux500/u8540_clk.c | 16 ++-------------- drivers/clk/ux500/u9540_clk.c | 4 ++-- include/linux/platform_data/clk-ux500.h | 17 ----------------- 6 files changed, 6 insertions(+), 60 deletions(-) delete mode 100644 include/linux/platform_data/clk-ux500.h diff --git a/MAINTAINERS b/MAINTAINERS index 7304d2e37a98..1c75f3f610ee 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1821,7 +1821,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.linaro.org/people/ulfh/clk.git S: Maintained F: drivers/clk/ux500/ -F: include/linux/platform_data/clk-ux500.h ARM/VERSATILE EXPRESS PLATFORM M: Liviu Dudau diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index f8c2d6f2fb7e..63853e76a4e1 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include @@ -66,17 +65,6 @@ void __init ux500_init_irq(void) prcmu_early_init(r.start, r.end-r.start); ux500_pm_init(r.start, r.end-r.start); ux500_l2x0_init(); - - /* - * Init clocks here so that they are available for system timer - * initialization. - */ - if (cpu_is_u8500_family()) - u8500_clk_init(); - else if (cpu_is_u9540()) - u9540_clk_init(); - else if (cpu_is_u8540()) - u8540_clk_init(); } static const char * __init ux500_get_machine(void) diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c index 9a736d939806..e960d686d9db 100644 --- a/drivers/clk/ux500/u8500_of_clk.c +++ b/drivers/clk/ux500/u8500_of_clk.c @@ -11,7 +11,6 @@ #include #include #include -#include #include "clk.h" #define PRCC_NUM_PERIPH_CLUSTERS 6 @@ -48,11 +47,6 @@ static struct clk *ux500_twocell_get(struct of_phandle_args *clkspec, return PRCC_SHOW(clk_data, base, bit); } -static const struct of_device_id u8500_clk_of_match[] = { - { .compatible = "stericsson,u8500-clks", }, - { }, -}; - /* CLKRST4 is missing making it hard to index things */ enum clkrst_index { CLKRST1_INDEX = 0, @@ -63,22 +57,15 @@ enum clkrst_index { CLKRST_MAX, }; -void u8500_clk_init(void) +static void u8500_clk_init(struct device_node *np) { struct prcmu_fw_version *fw_version; - struct device_node *np = NULL; struct device_node *child = NULL; const char *sgaclk_parent = NULL; struct clk *clk, *rtc_clk, *twd_clk; u32 bases[CLKRST_MAX]; int i; - if (of_have_populated_dt()) - np = of_find_matching_node(NULL, u8500_clk_of_match); - if (!np) { - pr_err("Either DT or U8500 Clock node not found\n"); - return; - } for (i = 0; i < ARRAY_SIZE(bases); i++) { struct resource r; @@ -573,3 +560,4 @@ void u8500_clk_init(void) of_clk_add_provider(child, of_clk_src_simple_get, twd_clk); } } +CLK_OF_DECLARE(u8500_clks, "stericsson,u8500-clks", u8500_clk_init); diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c index 86549e59fb42..133859f0e2bf 100644 --- a/drivers/clk/ux500/u8540_clk.c +++ b/drivers/clk/ux500/u8540_clk.c @@ -12,14 +12,8 @@ #include #include #include -#include #include "clk.h" -static const struct of_device_id u8540_clk_of_match[] = { - { .compatible = "stericsson,u8540-clks", }, - { } -}; - /* CLKRST4 is missing making it hard to index things */ enum clkrst_index { CLKRST1_INDEX = 0, @@ -30,19 +24,12 @@ enum clkrst_index { CLKRST_MAX, }; -void u8540_clk_init(void) +static void u8540_clk_init(struct device_node *np) { struct clk *clk; - struct device_node *np = NULL; u32 bases[CLKRST_MAX]; int i; - if (of_have_populated_dt()) - np = of_find_matching_node(NULL, u8540_clk_of_match); - if (!np) { - pr_err("Either DT or U8540 Clock node not found\n"); - return; - } for (i = 0; i < ARRAY_SIZE(bases); i++) { struct resource r; @@ -607,3 +594,4 @@ void u8540_clk_init(void) bases[CLKRST6_INDEX], BIT(0), CLK_SET_RATE_GATE); clk_register_clkdev(clk, NULL, "rng"); } +CLK_OF_DECLARE(u8540_clks, "stericsson,u8540-clks", u8540_clk_init); diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c index 2138a4c8cbca..7b6bca49ce42 100644 --- a/drivers/clk/ux500/u9540_clk.c +++ b/drivers/clk/ux500/u9540_clk.c @@ -9,10 +9,10 @@ #include #include -#include #include "clk.h" -void u9540_clk_init(void) +static void u9540_clk_init(struct device_node *np) { /* register clocks here */ } +CLK_OF_DECLARE(u9540_clks, "stericsson,u9540-clks", u9540_clk_init); diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h deleted file mode 100644 index 3af0da1f3be5..000000000000 --- a/include/linux/platform_data/clk-ux500.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Clock definitions for ux500 platforms - * - * Copyright (C) 2012 ST-Ericsson SA - * Author: Ulf Hansson - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __CLK_UX500_H -#define __CLK_UX500_H - -void u8500_clk_init(void); -void u9540_clk_init(void); -void u8540_clk_init(void); - -#endif /* __CLK_UX500_H */ From 4cf124f9a9d0d3505b6335d6061da54f83125b8e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Jun 2016 22:52:25 +0200 Subject: [PATCH 07/11] ARM: ux500: remove cpu_is_u* helpers These functions are all unused now and can be removed. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/id.h | 107 --------------------------------------- 1 file changed, 107 deletions(-) diff --git a/arch/arm/mach-ux500/id.h b/arch/arm/mach-ux500/id.h index bcc58a8cccbc..929f78ecf3df 100644 --- a/arch/arm/mach-ux500/id.h +++ b/arch/arm/mach-ux500/id.h @@ -32,113 +32,6 @@ static inline unsigned int __attribute_const__ dbx500_revision(void) return dbx500_id.revision; } -/* - * SOCs - */ - -static inline bool __attribute_const__ cpu_is_u8500(void) -{ - return dbx500_partnumber() == 0x8500; -} - -static inline bool __attribute_const__ cpu_is_u8520(void) -{ - return dbx500_partnumber() == 0x8520; -} - -static inline bool cpu_is_u8500_family(void) -{ - return cpu_is_u8500() || cpu_is_u8520(); -} - -static inline bool __attribute_const__ cpu_is_u9540(void) -{ - return dbx500_partnumber() == 0x9540; -} - -static inline bool __attribute_const__ cpu_is_u8540(void) -{ - return dbx500_partnumber() == 0x8540; -} - -static inline bool __attribute_const__ cpu_is_u8580(void) -{ - return dbx500_partnumber() == 0x8580; -} - -static inline bool cpu_is_ux540_family(void) -{ - return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580(); -} - -/* - * 8500 revisions - */ - -static inline bool __attribute_const__ cpu_is_u8500ed(void) -{ - return cpu_is_u8500() && dbx500_revision() == 0x00; -} - -static inline bool __attribute_const__ cpu_is_u8500v1(void) -{ - return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0; -} - -static inline bool __attribute_const__ cpu_is_u8500v10(void) -{ - return cpu_is_u8500() && dbx500_revision() == 0xA0; -} - -static inline bool __attribute_const__ cpu_is_u8500v11(void) -{ - return cpu_is_u8500() && dbx500_revision() == 0xA1; -} - -static inline bool __attribute_const__ cpu_is_u8500v2(void) -{ - return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0); -} - -static inline bool cpu_is_u8500v20(void) -{ - return cpu_is_u8500() && (dbx500_revision() == 0xB0); -} - -static inline bool cpu_is_u8500v21(void) -{ - return cpu_is_u8500() && (dbx500_revision() == 0xB1); -} - -static inline bool cpu_is_u8500v22(void) -{ - return cpu_is_u8500() && (dbx500_revision() == 0xB2); -} - -static inline bool cpu_is_u8500v20_or_later(void) -{ - return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11()); -} - -/* - * 8540 revisions - */ - -static inline bool __attribute_const__ cpu_is_u8540v10(void) -{ - return cpu_is_u8540() && dbx500_revision() == 0xA0; -} - -static inline bool __attribute_const__ cpu_is_u8580v10(void) -{ - return cpu_is_u8580() && dbx500_revision() == 0xA0; -} - -static inline bool ux500_is_svp(void) -{ - return false; -} - #define ux500_unknown_soc() BUG() #endif From cd1dc431d02afda521bed53b7c87a678a3ac246f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Jun 2016 23:01:26 +0200 Subject: [PATCH 08/11] ARM: ux500: consolidate soc_device code in id.c Nothing else uses the global dbx500_asic_id structure, so we can merge the two small files that reference it into one. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cache-l2x0.c | 1 - arch/arm/mach-ux500/cpu-db8500.c | 28 +------- arch/arm/mach-ux500/cpu.c | 70 -------------------- arch/arm/mach-ux500/id.c | 110 +++++++++++++++++++++++++++++-- arch/arm/mach-ux500/id.h | 37 ----------- arch/arm/mach-ux500/platsmp.c | 1 - arch/arm/mach-ux500/setup.h | 4 +- 7 files changed, 107 insertions(+), 144 deletions(-) delete mode 100644 arch/arm/mach-ux500/id.h diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index d7abc1187769..adec59cc2e1d 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -12,7 +12,6 @@ #include #include "db8500-regs.h" -#include "id.h" static int __init ux500_l2x0_unlock(void) { diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 3874e9c236e9..e7eba473d3bd 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -20,7 +20,6 @@ #include #include #include -#include #include @@ -60,31 +59,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; -static const char *db8500_read_soc_id(void) -{ - void __iomem *uid; - const char *retstr; - - uid = ioremap(U8500_BB_UID_BASE, 0x20); - if (!uid) - return NULL; - /* Throw these device-specific numbers into the entropy pool */ - add_device_randomness(uid, 0x14); - retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", - readl((u32 *)uid+0), - readl((u32 *)uid+1), readl((u32 *)uid+2), - readl((u32 *)uid+3), readl((u32 *)uid+4)); - iounmap(uid); - return retstr; -} - -static struct device * __init db8500_soc_device_init(void) -{ - const char *soc_id = db8500_read_soc_id(); - - return ux500_soc_device_init(soc_id); -} - static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), @@ -121,7 +95,7 @@ static const struct of_device_id u8500_local_bus_nodes[] = { static void __init u8500_init_machine(void) { - struct device *parent = db8500_soc_device_init(); + struct device *parent = ux500_soc_device_init(); /* automatically probe child nodes of dbx5x0 devices */ if (of_machine_is_compatible("st-ericsson,u8540")) diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 63853e76a4e1..a34af283ee23 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -27,7 +27,6 @@ #include "board-mop500.h" #include "db8500-regs.h" -#include "id.h" void ux500_restart(enum reboot_mode mode, const char *cmd) { @@ -66,72 +65,3 @@ void __init ux500_init_irq(void) ux500_pm_init(r.start, r.end-r.start); ux500_l2x0_init(); } - -static const char * __init ux500_get_machine(void) -{ - return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber()); -} - -static const char * __init ux500_get_family(void) -{ - return kasprintf(GFP_KERNEL, "ux500"); -} - -static const char * __init ux500_get_revision(void) -{ - unsigned int rev = dbx500_revision(); - - if (rev == 0x01) - return kasprintf(GFP_KERNEL, "%s", "ED"); - else if (rev >= 0xA0) - return kasprintf(GFP_KERNEL, "%d.%d", - (rev >> 4) - 0xA + 1, rev & 0xf); - - return kasprintf(GFP_KERNEL, "%s", "Unknown"); -} - -static ssize_t ux500_get_process(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - if (dbx500_id.process == 0x00) - return sprintf(buf, "Standard\n"); - - return sprintf(buf, "%02xnm\n", dbx500_id.process); -} - -static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr, - const char *soc_id) -{ - soc_dev_attr->soc_id = soc_id; - soc_dev_attr->machine = ux500_get_machine(); - soc_dev_attr->family = ux500_get_family(); - soc_dev_attr->revision = ux500_get_revision(); -} - -static const struct device_attribute ux500_soc_attr = - __ATTR(process, S_IRUGO, ux500_get_process, NULL); - -struct device * __init ux500_soc_device_init(const char *soc_id) -{ - struct device *parent; - struct soc_device *soc_dev; - struct soc_device_attribute *soc_dev_attr; - - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); - if (!soc_dev_attr) - return ERR_PTR(-ENOMEM); - - soc_info_populate(soc_dev_attr, soc_id); - - soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR(soc_dev)) { - kfree(soc_dev_attr); - return NULL; - } - - parent = soc_device_to_device(soc_dev); - device_create_file(parent, &ux500_soc_attr); - - return parent; -} diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index 1e81e990044b..17f80ef44c58 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -8,6 +8,9 @@ #include #include #include +#include +#include +#include #include #include @@ -17,9 +20,20 @@ #include "setup.h" #include "db8500-regs.h" -#include "id.h" -struct dbx500_asic_id dbx500_id; +/** + * struct dbx500_asic_id - fields of the ASIC ID + * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard" + * @partnumber: hithereto 0x8500 for DB8500 + * @revision: version code in the series + */ +struct dbx500_asic_id { + u16 partnumber; + u8 revision; + u8 process; +}; + +static struct dbx500_asic_id dbx500_id; static unsigned int __init ux500_read_asicid(phys_addr_t addr) { @@ -42,9 +56,9 @@ static unsigned int __init ux500_read_asicid(phys_addr_t addr) static void ux500_print_soc_info(unsigned int asicid) { - unsigned int rev = dbx500_revision(); + unsigned int rev = dbx500_id.revision; - pr_info("DB%4x ", dbx500_partnumber()); + pr_info("DB%4x ", dbx500_id.partnumber); if (rev == 0x01) pr_cont("Early Drop"); @@ -105,7 +119,7 @@ void __init ux500_setup_id(void) if (!asicid) { pr_err("Unable to identify SoC\n"); - ux500_unknown_soc(); + BUG(); } dbx500_id.process = asicid >> 24; @@ -114,3 +128,89 @@ void __init ux500_setup_id(void) ux500_print_soc_info(asicid); } + +static const char * __init ux500_get_machine(void) +{ + return kasprintf(GFP_KERNEL, "DB%4x", dbx500_id.partnumber); +} + +static const char * __init ux500_get_family(void) +{ + return kasprintf(GFP_KERNEL, "ux500"); +} + +static const char * __init ux500_get_revision(void) +{ + unsigned int rev = dbx500_id.revision; + + if (rev == 0x01) + return kasprintf(GFP_KERNEL, "%s", "ED"); + else if (rev >= 0xA0) + return kasprintf(GFP_KERNEL, "%d.%d", + (rev >> 4) - 0xA + 1, rev & 0xf); + + return kasprintf(GFP_KERNEL, "%s", "Unknown"); +} + +static ssize_t ux500_get_process(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + if (dbx500_id.process == 0x00) + return sprintf(buf, "Standard\n"); + + return sprintf(buf, "%02xnm\n", dbx500_id.process); +} + +static const char *db8500_read_soc_id(void) +{ + void __iomem *uid; + const char *retstr; + + uid = ioremap(U8500_BB_UID_BASE, 0x20); + if (!uid) + return NULL; + /* Throw these device-specific numbers into the entropy pool */ + add_device_randomness(uid, 0x14); + retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", + readl((u32 *)uid+0), + readl((u32 *)uid+1), readl((u32 *)uid+2), + readl((u32 *)uid+3), readl((u32 *)uid+4)); + iounmap(uid); + return retstr; +} + +static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr) +{ + soc_dev_attr->soc_id = db8500_read_soc_id(); + soc_dev_attr->machine = ux500_get_machine(); + soc_dev_attr->family = ux500_get_family(); + soc_dev_attr->revision = ux500_get_revision(); +} + +static const struct device_attribute ux500_soc_attr = + __ATTR(process, S_IRUGO, ux500_get_process, NULL); + +struct device * __init ux500_soc_device_init(void) +{ + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return ERR_PTR(-ENOMEM); + + soc_info_populate(soc_dev_attr); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr); + return NULL; + } + + parent = soc_device_to_device(soc_dev); + device_create_file(parent, &ux500_soc_attr); + + return parent; +} diff --git a/arch/arm/mach-ux500/id.h b/arch/arm/mach-ux500/id.h deleted file mode 100644 index 929f78ecf3df..000000000000 --- a/arch/arm/mach-ux500/id.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_UX500_ID -#define __MACH_UX500_ID - -/** - * struct dbx500_asic_id - fields of the ASIC ID - * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard" - * @partnumber: hithereto 0x8500 for DB8500 - * @revision: version code in the series - */ -struct dbx500_asic_id { - u16 partnumber; - u8 revision; - u8 process; -}; - -extern struct dbx500_asic_id dbx500_id; - -static inline unsigned int __attribute_const__ dbx500_partnumber(void) -{ - return dbx500_id.partnumber; -} - -static inline unsigned int __attribute_const__ dbx500_revision(void) -{ - return dbx500_id.revision; -} - -#define ux500_unknown_soc() BUG() - -#endif diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 88b8ab4f300c..8f2f615ff958 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -26,7 +26,6 @@ #include "setup.h" #include "db8500-regs.h" -#include "id.h" /* Magic triggers in backup RAM */ #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4 diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index 8b44b646b191..1e9e7c55df75 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -19,11 +19,9 @@ void ux500_l2x0_init(void); void ux500_restart(enum reboot_mode mode, const char *cmd); -void __init ux500_setup_id(void); - extern void __init ux500_init_irq(void); -extern struct device *ux500_soc_device_init(const char *soc_id); +extern struct device *ux500_soc_device_init(void); extern void ux500_cpu_die(unsigned int cpu); From f15601d62bf1348c1dc9fe3455b277a652db1c6e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Jun 2016 23:21:20 +0200 Subject: [PATCH 09/11] ARM: ux500: call ux500_setup_id later ux500_setup_id is currently called from u8500_map_io(), which is really early, but nothing relies on the ID any more, other than a printk message that is not really all that important to have early during boot. If we move the call to ux500_setup_id() into ux500_soc_device_init(), that file becomes usuable almost entirely standalone, and we can kill off the u8500_map_io() callback as it just does the default debug_ll_io_init() now. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 8 -------- arch/arm/mach-ux500/id.c | 23 ++++++++++------------- 2 files changed, 10 insertions(+), 21 deletions(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index e7eba473d3bd..881cafbc4d97 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -27,13 +27,6 @@ #include "board-mop500.h" #include "db8500-regs.h" -#include "id.h" - -static void __init u8500_map_io(void) -{ - debug_ll_io_init(); - ux500_setup_id(); -} /* * The PMU IRQ lines of two cores are wired together into a single interrupt. @@ -117,7 +110,6 @@ static const char * stericsson_dt_platform_compat[] = { DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .map_io = u8500_map_io, .init_irq = ux500_init_irq, .init_machine = u8500_init_machine, .dt_compat = stericsson_dt_platform_compat, diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index 17f80ef44c58..983004d0fef2 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -37,21 +37,16 @@ static struct dbx500_asic_id dbx500_id; static unsigned int __init ux500_read_asicid(phys_addr_t addr) { - phys_addr_t base = addr & ~0xfff; - struct map_desc desc = { - .virtual = (unsigned long)UX500_VIRT_ROM, - .pfn = __phys_to_pfn(base), - .length = SZ_16K, - .type = MT_DEVICE, - }; + void __iomem *virt = ioremap(addr, 4); + unsigned int asicid; - iotable_init(&desc, 1); + if (!virt) + return 0; - /* As in devicemaps_init() */ - local_flush_tlb_all(); - flush_cache_all(); + asicid = readl(virt); + iounmap(virt); - return readl(UX500_VIRT_ROM + (addr & 0xfff)); + return asicid; } static void ux500_print_soc_info(unsigned int asicid) @@ -86,7 +81,7 @@ static unsigned int partnumber(unsigned int asicid) * DB9540 0x413fc090 0xFFFFDBF4 0x009540xx */ -void __init ux500_setup_id(void) +static void __init ux500_setup_id(void) { unsigned int cpuid = read_cpuid_id(); unsigned int asicid = 0; @@ -197,6 +192,8 @@ struct device * __init ux500_soc_device_init(void) struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; + ux500_setup_id(); + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) return ERR_PTR(-ENOMEM); From 18a992787896fe822b2ea750e68d69cac0726739 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 22 Jun 2016 16:32:36 +0200 Subject: [PATCH 10/11] ARM: ux500: move soc_id driver to drivers/soc As the ux500 id code is basically a standalone driver, we can move it out of the arch code into drivers/soc/ux500. This is a user-visible change, as it moves all the devices in sysfs from /sys/devices/soc0/ to /sys/devices/ and leaves the soc0 node as a separate device. Originally the idea was to put all on-chip devices under the soc node, and ux500 was the first platform to have this device, but later platforms almost all didn't follow that pattern, so this makes the platform do the same thing as everyone else. Since the platform is really obsolete now, I am optimistic that nothing will break after moving the devices around. As the SoC driver no longer has access to the private header files, I'm changing the code to instead look up the address of the backupram from devicetree, which is a good idea anyway. Finally, having a separate Kconfig symbol means the driver is now optional and could even be a loadable module rather than always being built-in if we allowed that for soc_device. Signed-off-by: Arnd Bergmann [Fixup mising Makefile, fixup BB_UID_BASE to fc0] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Makefile | 2 +- arch/arm/mach-ux500/cpu-db8500.c | 6 +-- arch/arm/mach-ux500/setup.h | 2 - drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + drivers/soc/ux500/Kconfig | 7 ++++ drivers/soc/ux500/Makefile | 1 + .../id.c => drivers/soc/ux500/ux500-soc-id.c | 39 ++++++++++++------- 8 files changed, 37 insertions(+), 22 deletions(-) create mode 100644 drivers/soc/ux500/Kconfig create mode 100644 drivers/soc/ux500/Makefile rename arch/arm/mach-ux500/id.c => drivers/soc/ux500/ux500-soc-id.c (86%) diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index ea8893fd128f..753d3eed1985 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := cpu.o id.o pm.o +obj-y := cpu.o pm.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o obj-$(CONFIG_MACH_MOP500) += board-mop500-audio.o diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 881cafbc4d97..c9c9832f79e9 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -88,15 +88,13 @@ static const struct of_device_id u8500_local_bus_nodes[] = { static void __init u8500_init_machine(void) { - struct device *parent = ux500_soc_device_init(); - /* automatically probe child nodes of dbx5x0 devices */ if (of_machine_is_compatible("st-ericsson,u8540")) of_platform_populate(NULL, u8500_local_bus_nodes, - u8540_auxdata_lookup, parent); + u8540_auxdata_lookup, NULL); else of_platform_populate(NULL, u8500_local_bus_nodes, - u8500_auxdata_lookup, parent); + u8500_auxdata_lookup, NULL); } static const char * stericsson_dt_platform_compat[] = { diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index 1e9e7c55df75..85b7819a40ab 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -21,8 +21,6 @@ void ux500_restart(enum reboot_mode mode, const char *cmd); extern void __init ux500_init_irq(void); -extern struct device *ux500_soc_device_init(void); - extern void ux500_cpu_die(unsigned int cpu); #endif /* __ASM_ARCH_SETUP_H */ diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index cb58ef0d9b2c..b9c1bf43ebec 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -10,6 +10,7 @@ source "drivers/soc/samsung/Kconfig" source "drivers/soc/sunxi/Kconfig" source "drivers/soc/tegra/Kconfig" source "drivers/soc/ti/Kconfig" +source "drivers/soc/ux500/Kconfig" source "drivers/soc/versatile/Kconfig" endmenu diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 380230f03874..02359c95d7f3 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -15,4 +15,5 @@ obj-$(CONFIG_SOC_SAMSUNG) += samsung/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_SOC_TI) += ti/ +obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_PLAT_VERSATILE) += versatile/ diff --git a/drivers/soc/ux500/Kconfig b/drivers/soc/ux500/Kconfig new file mode 100644 index 000000000000..025a44aef5db --- /dev/null +++ b/drivers/soc/ux500/Kconfig @@ -0,0 +1,7 @@ +config UX500_SOC_ID + bool "SoC bus for ST-Ericsson ux500" + depends on ARCH_U8500 || COMPILE_TEST + default ARCH_U8500 + help + Include support for the SoC bus on the ARM RealView platforms + providing some sysfs information about the ASIC variant. diff --git a/drivers/soc/ux500/Makefile b/drivers/soc/ux500/Makefile new file mode 100644 index 000000000000..0b87ad04b018 --- /dev/null +++ b/drivers/soc/ux500/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_UX500_SOC_ID) += ux500-soc-id.o diff --git a/arch/arm/mach-ux500/id.c b/drivers/soc/ux500/ux500-soc-id.c similarity index 86% rename from arch/arm/mach-ux500/id.c rename to drivers/soc/ux500/ux500-soc-id.c index 983004d0fef2..6c1be74e5fcc 100644 --- a/arch/arm/mach-ux500/id.c +++ b/drivers/soc/ux500/ux500-soc-id.c @@ -8,8 +8,11 @@ #include #include #include +#include #include #include +#include +#include #include #include @@ -17,10 +20,6 @@ #include #include -#include "setup.h" - -#include "db8500-regs.h" - /** * struct dbx500_asic_id - fields of the ASIC ID * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard" @@ -157,27 +156,31 @@ static ssize_t ux500_get_process(struct device *dev, return sprintf(buf, "%02xnm\n", dbx500_id.process); } -static const char *db8500_read_soc_id(void) +static const char *db8500_read_soc_id(struct device_node *backupram) { + void __iomem *base; void __iomem *uid; const char *retstr; - uid = ioremap(U8500_BB_UID_BASE, 0x20); - if (!uid) + base = of_iomap(backupram, 0); + if (!base) return NULL; + uid = base + 0x1fc0; + /* Throw these device-specific numbers into the entropy pool */ add_device_randomness(uid, 0x14); retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", readl((u32 *)uid+0), readl((u32 *)uid+1), readl((u32 *)uid+2), readl((u32 *)uid+3), readl((u32 *)uid+4)); - iounmap(uid); + iounmap(base); return retstr; } -static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr) +static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr, + struct device_node *backupram) { - soc_dev_attr->soc_id = db8500_read_soc_id(); + soc_dev_attr->soc_id = db8500_read_soc_id(backupram); soc_dev_attr->machine = ux500_get_machine(); soc_dev_attr->family = ux500_get_family(); soc_dev_attr->revision = ux500_get_revision(); @@ -186,28 +189,34 @@ static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr) static const struct device_attribute ux500_soc_attr = __ATTR(process, S_IRUGO, ux500_get_process, NULL); -struct device * __init ux500_soc_device_init(void) +static int __init ux500_soc_device_init(void) { struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; + struct device_node *backupram; + + backupram = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram"); + if (!backupram) + return 0; ux500_setup_id(); soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) - return ERR_PTR(-ENOMEM); + return -ENOMEM; - soc_info_populate(soc_dev_attr); + soc_info_populate(soc_dev_attr, backupram); soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) { kfree(soc_dev_attr); - return NULL; + return PTR_ERR(soc_dev); } parent = soc_device_to_device(soc_dev); device_create_file(parent, &ux500_soc_attr); - return parent; + return 0; } +subsys_initcall(ux500_soc_device_init); From a16729ea822806a6f87415bcb523eaeb7f4b4ebd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 20 Jun 2016 23:40:55 +0200 Subject: [PATCH 11/11] ARM: ux500: consolidate base platform files The cpu.c and cache-l2x0.c files hold only two or three simple functions each, and they are all called from the machine descriptors, so we can just move them all into the same file for simplicity and consistency. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Makefile | 3 +- arch/arm/mach-ux500/cache-l2x0.c | 60 ---------------------- arch/arm/mach-ux500/cpu-db8500.c | 87 ++++++++++++++++++++++++++++++++ arch/arm/mach-ux500/cpu.c | 67 ------------------------ arch/arm/mach-ux500/setup.h | 10 ---- 5 files changed, 88 insertions(+), 139 deletions(-) delete mode 100644 arch/arm/mach-ux500/cache-l2x0.c delete mode 100644 arch/arm/mach-ux500/cpu.c diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 753d3eed1985..56d0eb6e254e 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,8 +2,7 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := cpu.o pm.o -obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o +obj-y := pm.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o obj-$(CONFIG_MACH_MOP500) += board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c deleted file mode 100644 index adec59cc2e1d..000000000000 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#include -#include -#include - -#include -#include - -#include "db8500-regs.h" - -static int __init ux500_l2x0_unlock(void) -{ - int i; - struct device_node *np; - void __iomem *l2x0_base; - - np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); - l2x0_base = of_iomap(np, 0); - of_node_put(np); - if (!l2x0_base) - return -ENODEV; - - /* - * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions - * apparently locks both caches before jumping to the kernel. The - * l2x0 core will not touch the unlock registers if the l2x0 is - * already enabled, so we do it right here instead. The PL310 has - * 8 sets of registers, one per possible CPU. - */ - for (i = 0; i < 8; i++) { - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + - i * L2X0_LOCKDOWN_STRIDE); - writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + - i * L2X0_LOCKDOWN_STRIDE); - } - iounmap(l2x0_base); - return 0; -} - -static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) -{ - /* - * We can't write to secure registers as we are in non-secure - * mode, until we have some SMI service available. - */ -} - -void __init ux500_l2x0_init(void) -{ - /* Unlock before init */ - ux500_l2x0_unlock(); - outer_cache.write_sec = ux500_l2c310_write_sec; - - return 0; -} diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index c9c9832f79e9..46b1da1bf5d2 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -12,22 +12,109 @@ #include #include #include +#include #include #include +#include +#include +#include +#include #include #include #include +#include #include #include #include +#include +#include #include +#include #include "setup.h" #include "board-mop500.h" #include "db8500-regs.h" +static int __init ux500_l2x0_unlock(void) +{ + int i; + struct device_node *np; + void __iomem *l2x0_base; + + np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); + l2x0_base = of_iomap(np, 0); + of_node_put(np); + if (!l2x0_base) + return -ENODEV; + + /* + * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions + * apparently locks both caches before jumping to the kernel. The + * l2x0 core will not touch the unlock registers if the l2x0 is + * already enabled, so we do it right here instead. The PL310 has + * 8 sets of registers, one per possible CPU. + */ + for (i = 0; i < 8; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } + iounmap(l2x0_base); + return 0; +} + +static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) +{ + /* + * We can't write to secure registers as we are in non-secure + * mode, until we have some SMI service available. + */ +} + +/* + * FIXME: Should we set up the GPIO domain here? + * + * The problem is that we cannot put the interrupt resources into the platform + * device until the irqdomain has been added. Right now, we set the GIC interrupt + * domain from init_irq(), then load the gpio driver from + * core_initcall(nmk_gpio_init) and add the platform devices from + * arch_initcall(customize_machine). + * + * This feels fragile because it depends on the gpio device getting probed + * _before_ any device uses the gpio interrupts. +*/ +static void __init ux500_init_irq(void) +{ + struct device_node *np; + struct resource r; + + irqchip_init(); + np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu"); + of_address_to_resource(np, 0, &r); + of_node_put(np); + if (!r.start) { + pr_err("could not find PRCMU base resource\n"); + return; + } + prcmu_early_init(r.start, r.end-r.start); + ux500_pm_init(r.start, r.end-r.start); + + /* Unlock before init */ + ux500_l2x0_unlock(); + outer_cache.write_sec = ux500_l2c310_write_sec; +} + +static void ux500_restart(enum reboot_mode mode, const char *cmd) +{ + local_irq_disable(); + local_fiq_disable(); + + prcmu_system_reset(0); +} + /* * The PMU IRQ lines of two cores are wired together into a single interrupt. * Bounce the interrupt to the other core if it's not ours. diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c deleted file mode 100644 index a34af283ee23..000000000000 --- a/arch/arm/mach-ux500/cpu.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent for ST-Ericsson - * Author: Lee Jones for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "setup.h" - -#include "board-mop500.h" -#include "db8500-regs.h" - -void ux500_restart(enum reboot_mode mode, const char *cmd) -{ - local_irq_disable(); - local_fiq_disable(); - - prcmu_system_reset(0); -} - -/* - * FIXME: Should we set up the GPIO domain here? - * - * The problem is that we cannot put the interrupt resources into the platform - * device until the irqdomain has been added. Right now, we set the GIC interrupt - * domain from init_irq(), then load the gpio driver from - * core_initcall(nmk_gpio_init) and add the platform devices from - * arch_initcall(customize_machine). - * - * This feels fragile because it depends on the gpio device getting probed - * _before_ any device uses the gpio interrupts. -*/ -void __init ux500_init_irq(void) -{ - struct device_node *np; - struct resource r; - - irqchip_init(); - np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu"); - of_address_to_resource(np, 0, &r); - of_node_put(np); - if (!r.start) { - pr_err("could not find PRCMU base resource\n"); - return; - } - prcmu_early_init(r.start, r.end-r.start); - ux500_pm_init(r.start, r.end-r.start); - ux500_l2x0_init(); -} diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index 85b7819a40ab..988e7c77068d 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -11,16 +11,6 @@ #ifndef __ASM_ARCH_SETUP_H #define __ASM_ARCH_SETUP_H -#include -#include - - -void ux500_l2x0_init(void); - -void ux500_restart(enum reboot_mode mode, const char *cmd); - -extern void __init ux500_init_irq(void); - extern void ux500_cpu_die(unsigned int cpu); #endif /* __ASM_ARCH_SETUP_H */