microblaze: Support simpleImage.dts make target

Instead of remembering to specify DTB= on the make commandline, this commit
allows the much friendlier make simpleImage.<dts>
where <dts>.dts is expected to be found in arch/microblaze/boot/dts/
The resulting vmlinux, with the compiled DTS linked in, will be copied to
boot/simpleImage.<dts>

This mirrors the same functionality as on PowerPC,
albeit achieving it in a slightly different way.

+ strip simpleImage file
The size of output file is very similar to linux.bin.

vmlinux - full elf without fdt blob
simpleImage.<dtb name>.unstrip - full elf with fdt blob
simpleImage.<dtb name> - stripped elf with fdt blob

Add symlink to generic system.dts in platform folder

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
This commit is contained in:
Michal Simek 2009-09-14 15:15:49 +02:00
parent cfa9a775b9
commit f05131cd7a
4 changed files with 66 additions and 6 deletions

View File

@ -53,22 +53,41 @@ core-y += arch/microblaze/platform/
boot := arch/microblaze/boot
# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
ifneq ($(DTB),)
core-y += $(boot)/
endif
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
MMU := -nommu
endif
export MMU
export MMU DTB
all: linux.bin
BOOT_TARGETS = linux.bin linux.bin.gz simpleImage.%
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
linux.bin linux.bin.gz: vmlinux
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
define archhelp
echo '* linux.bin - Create raw binary'
echo ' linux.bin.gz - Create compressed raw binary'
echo '* linux.bin - Create raw binary'
echo ' linux.bin.gz - Create compressed raw binary'
echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
echo ' - stripped elf with fdt blob
echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob'
echo ' *_defconfig - Select default config from arch/microblaze/configs'
echo ''
echo ' Targets with <dt> embed a device tree blob inside the image'
echo ' These targets support board with firmware that does not'
echo ' support passing a device tree directly. Replace <dt> with the'
echo ' name of a dts file from the arch/microblaze/boot/dts/ directory'
echo ' (minus the .dts extension).'
endef

View File

@ -2,10 +2,24 @@
# arch/microblaze/boot/Makefile
#
targets := linux.bin linux.bin.gz
obj-y += linked_dtb.o
targets := linux.bin linux.bin.gz simpleImage.%
OBJCOPYFLAGS_linux.bin := -O binary
# Where the DTS files live
dtstree := $(srctree)/$(src)/dts
# Ensure system.dtb exists
$(obj)/linked_dtb.o: $(obj)/system.dtb
# Generate system.dtb from $(DTB).dtb
ifneq ($(DTB),system)
$(obj)/system.dtb: $(obj)/$(DTB).dtb
$(call if_changed,cp)
endif
$(obj)/linux.bin: vmlinux FORCE
[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
@ -16,4 +30,27 @@ $(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
$(call if_changed,gzip)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
clean-kernel += linux.bin linux.bin.gz
quiet_cmd_cp = CP $< $@$2
cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
quiet_cmd_strip = STRIP $@
cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@
$(obj)/simpleImage.%: vmlinux FORCE
$(call if_changed,cp,.unstrip)
$(call if_changed,strip)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
# Rule to build device tree blobs
DTC = $(objtree)/scripts/dtc/dtc
# Rule to build device tree blobs
quiet_cmd_dtc = DTC $@
cmd_dtc = $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 -p 1024 $(dtstree)/$*.dts
$(obj)/%.dtb: $(dtstree)/%.dts FORCE
$(call if_changed,dtc)
clean-kernel += linux.bin linux.bin.gz simpleImage.*
clean-files += *.dtb

View File

@ -0,0 +1 @@
../../platform/generic/system.dts

View File

@ -0,0 +1,3 @@
.section __fdt_blob,"a"
.incbin "arch/microblaze/boot/system.dtb"