OMAP1: AMS_DELTA: add modem support

This patch adds support for modem device found on Amstrad E3 (Delta) board.

Based on earlier patch by Jonathan McDowell, available at
http://the.earth.li/pub/e3/2.6.19/ams-delta-modem.patch.
Modified after Ladislav Michl's arch/arm/mach-omap1/board-voiceblue.c.

This patch is dependent on 8250 driver changes getting accepted upstream:
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Janusz Krzysztofik 2009-08-28 10:51:37 -07:00 committed by Tony Lindgren
parent 82dbb9d39f
commit eff443df67

View File

@ -15,8 +15,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <asm/serial.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -230,6 +233,41 @@ static void __init ams_delta_init(void)
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
.membase = (void *) AMS_DELTA_MODEM_VIRT,
.mapbase = AMS_DELTA_MODEM_PHYS,
.irq = -EINVAL, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
.irqflags = IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = BASE_BAUD * 16,
},
{ },
};
static struct platform_device ams_delta_modem_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = ams_delta_modem_ports,
},
};
static int __init ams_delta_modem_init(void)
{
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq = gpio_to_irq(2);
ams_delta_latch2_write(
AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
return platform_device_register(&ams_delta_modem_device);
}
arch_initcall(ams_delta_modem_init);
static void __init ams_delta_map_io(void)
{
omap1_map_common_io();