From ef8c9809acb0805c991bba8bdd4749fc46d44a98 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Sat, 18 Jan 2020 15:41:20 -0500 Subject: [PATCH 01/10] drm/msm/mdp5: rate limit pp done timeout warnings Add rate limiting of the 'pp done time out' warnings since these warnings can quickly fill the dmesg buffer. Signed-off-by: Brian Masney Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c index 05cc04f729d6..e1cc541e0ef2 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c @@ -1109,8 +1109,8 @@ static void mdp5_crtc_wait_for_pp_done(struct drm_crtc *crtc) ret = wait_for_completion_timeout(&mdp5_crtc->pp_completion, msecs_to_jiffies(50)); if (ret == 0) - dev_warn(dev->dev, "pp done time out, lm=%d\n", - mdp5_cstate->pipeline.mixer->lm); + dev_warn_ratelimited(dev->dev, "pp done time out, lm=%d\n", + mdp5_cstate->pipeline.mixer->lm); } static void mdp5_crtc_wait_for_flush_done(struct drm_crtc *crtc) From e4f9bbe9f8beab9a1ce460e7e194595b76868595 Mon Sep 17 00:00:00 2001 From: Kalyan Thota Date: Thu, 23 Jan 2020 15:47:55 +0530 Subject: [PATCH 02/10] msm:disp:dpu1: add UBWC support for display on SC7180 Add UBWC global configuration for display on SC7180 target. Signed-off-by: Kalyan Thota Tested-by: Douglas Anderson Fixes: 73bfb790ac78 ("msm:disp:dpu1: setup display datapath for SC7180 target") Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c | 58 +++++++++++++++++++++++- 1 file changed, 57 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c index 29705e773a4b..80d3cfc14007 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c @@ -12,6 +12,7 @@ #define to_dpu_mdss(x) container_of(x, struct dpu_mdss, base) +#define HW_REV 0x0 #define HW_INTR_STATUS 0x0010 /* Max BW defined in KBps */ @@ -22,6 +23,17 @@ struct dpu_irq_controller { struct irq_domain *domain; }; +struct dpu_hw_cfg { + u32 val; + u32 offset; +}; + +struct dpu_mdss_hw_init_handler { + u32 hw_rev; + u32 hw_reg_count; + struct dpu_hw_cfg* hw_cfg; +}; + struct dpu_mdss { struct msm_mdss base; void __iomem *mmio; @@ -32,6 +44,44 @@ struct dpu_mdss { u32 num_paths; }; +static struct dpu_hw_cfg hw_cfg[] = { + { + /* UBWC global settings */ + .val = 0x1E, + .offset = 0x144, + } +}; + +static struct dpu_mdss_hw_init_handler cfg_handler[] = { + { .hw_rev = DPU_HW_VER_620, + .hw_reg_count = ARRAY_SIZE(hw_cfg), + .hw_cfg = hw_cfg + }, +}; + +static void dpu_mdss_hw_init(struct dpu_mdss *dpu_mdss, u32 hw_rev) +{ + int i; + u32 count = 0; + struct dpu_hw_cfg *hw_cfg = NULL; + + for (i = 0; i < ARRAY_SIZE(cfg_handler); i++) { + if (cfg_handler[i].hw_rev == hw_rev) { + hw_cfg = cfg_handler[i].hw_cfg; + count = cfg_handler[i].hw_reg_count; + break; + } + } + + for (i = 0; i < count; i++ ) { + writel_relaxed(hw_cfg->val, + dpu_mdss->mmio + hw_cfg->offset); + hw_cfg++; + } + + return; +} + static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev, struct dpu_mdss *dpu_mdss) { @@ -174,12 +224,18 @@ static int dpu_mdss_enable(struct msm_mdss *mdss) struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss); struct dss_module_power *mp = &dpu_mdss->mp; int ret; + u32 mdss_rev; dpu_mdss_icc_request_bw(mdss); ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true); - if (ret) + if (ret) { DPU_ERROR("clock enable failed, ret:%d\n", ret); + return ret; + } + + mdss_rev = readl_relaxed(dpu_mdss->mmio + HW_REV); + dpu_mdss_hw_init(dpu_mdss, mdss_rev); return ret; } From e8e35c62ba517f73cca32bc9925d62f4c4981768 Mon Sep 17 00:00:00 2001 From: Akhil P Oommen Date: Fri, 24 Jan 2020 17:50:11 +0530 Subject: [PATCH 03/10] drm/msm/a6xx: Correct the highestbank configuration Highest bank bit configuration is different for a618 gpu. Update it with the correct configuration which is the reset value incidentally. Signed-off-by: Akhil P Oommen Signed-off-by: Sharat Masetty Fixes: e812744c5f95 ("drm: msm: a6xx: Add support for A618") Reviewed-by: Rob Clark Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index daf07800cde0..536d1960a188 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -470,10 +470,12 @@ static int a6xx_hw_init(struct msm_gpu *gpu) /* Select CP0 to always count cycles */ gpu_write(gpu, REG_A6XX_CP_PERFCTR_CP_SEL_0, PERF_CP_ALWAYS_COUNT); - gpu_write(gpu, REG_A6XX_RB_NC_MODE_CNTL, 2 << 1); - gpu_write(gpu, REG_A6XX_TPL1_NC_MODE_CNTL, 2 << 1); - gpu_write(gpu, REG_A6XX_SP_NC_MODE_CNTL, 2 << 1); - gpu_write(gpu, REG_A6XX_UCHE_MODE_CNTL, 2 << 21); + if (adreno_is_a630(adreno_gpu)) { + gpu_write(gpu, REG_A6XX_RB_NC_MODE_CNTL, 2 << 1); + gpu_write(gpu, REG_A6XX_TPL1_NC_MODE_CNTL, 2 << 1); + gpu_write(gpu, REG_A6XX_SP_NC_MODE_CNTL, 2 << 1); + gpu_write(gpu, REG_A6XX_UCHE_MODE_CNTL, 2 << 21); + } /* Enable fault detection */ gpu_write(gpu, REG_A6XX_RBBM_INTERFACE_HANG_INT_CNTL, From 7fd2dfc3694922eb7ace4801b7208cf9f62ebc7d Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 29 Jan 2020 20:12:44 +0000 Subject: [PATCH 04/10] drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI I was hitting kCFI crashes when building with clang, and after some digging finally narrowed it down to the dsi_mgr_connector_mode_valid() function being implemented as returning an int, instead of an enum drm_mode_status. This patch fixes it, and appeases the opaque word of the kCFI gods (seriously, clang inlining everything makes the kCFI backtraces only really rough estimates of where things went wrong). Thanks as always to Sami for his help narrowing this down. Cc: Rob Clark Cc: Sean Paul Cc: Sami Tolvanen Cc: Todd Kjos Cc: Alistair Delva Cc: Amit Pundir Cc: Sumit Semwal Cc: freedreno@lists.freedesktop.org Cc: clang-built-linux@googlegroups.com Signed-off-by: John Stultz Reviewed-by: Nick Desaulniers Tested-by: Amit Pundir Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi_manager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index 104115d112eb..acc711fd14f8 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -336,7 +336,7 @@ static int dsi_mgr_connector_get_modes(struct drm_connector *connector) return num; } -static int dsi_mgr_connector_mode_valid(struct drm_connector *connector, +static enum drm_mode_status dsi_mgr_connector_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { int id = dsi_mgr_connector_get_id(connector); From 56d977d5610bc6a83cf5f2d69cec91f3a2b91f77 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Tue, 4 Feb 2020 10:42:28 -0700 Subject: [PATCH 05/10] drm/msm/a6xx: Remove unneeded GBIF unhalt Commit e812744c5f95 ("drm: msm: a6xx: Add support for A618") added a universal GBIF un-halt into a6xx_start(). This can cause problems for a630 targets which do not use GBIF and might have access protection enabled on the region now occupied by the GBIF registers. But it turns out that we didn't need to unhalt the GBIF in this path since the stop function already takes care of that after executing a flush but before turning off the headswitch. We should be confident that the GBIF is open for business when we restart the hardware. Signed-off-by: Jordan Crouse Tested-by: John Stultz Reviewed-by: Rob Clark Fixes: e812744c5f95 ("drm: msm: a6xx: Add support for A618") Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index 536d1960a188..7c449d154b4d 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -378,18 +378,6 @@ static int a6xx_hw_init(struct msm_gpu *gpu) struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); int ret; - /* - * During a previous slumber, GBIF halt is asserted to ensure - * no further transaction can go through GPU before GPU - * headswitch is turned off. - * - * This halt is deasserted once headswitch goes off but - * incase headswitch doesn't goes off clear GBIF halt - * here to ensure GPU wake-up doesn't fail because of - * halted GPU transactions. - */ - gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0); - /* Make sure the GMU keeps the GPU on while we set it up */ a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET); From 1636295a9f6931e8524c416ae333cd9ff7ef4661 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Wed, 5 Feb 2020 10:01:21 -0700 Subject: [PATCH 06/10] drm/msm/a6xx: Update the GMU bus tables for sc7180 Fixup the GMU bus table values for the sc7180 target. Signed-off-by: Jordan Crouse Reviewed-by: Rob Clark Fixes: e812744c5f95 ("drm: msm: a6xx: Add support for A618") Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 85 +++++++++++++++++++-------- 1 file changed, 60 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c index eda11abc5f01..e450e0b97211 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c @@ -7,6 +7,7 @@ #include "a6xx_gmu.h" #include "a6xx_gmu.xml.h" +#include "a6xx_gpu.h" #define HFI_MSG_ID(val) [val] = #val @@ -216,48 +217,82 @@ static int a6xx_hfi_send_perf_table(struct a6xx_gmu *gmu) NULL, 0); } -static int a6xx_hfi_send_bw_table(struct a6xx_gmu *gmu) +static void a618_build_bw_table(struct a6xx_hfi_msg_bw_table *msg) { - struct a6xx_hfi_msg_bw_table msg = { 0 }; + /* Send a single "off" entry since the 618 GMU doesn't do bus scaling */ + msg->bw_level_num = 1; + + msg->ddr_cmds_num = 3; + msg->ddr_wait_bitmask = 0x01; + + msg->ddr_cmds_addrs[0] = 0x50000; + msg->ddr_cmds_addrs[1] = 0x5003c; + msg->ddr_cmds_addrs[2] = 0x5000c; + + msg->ddr_cmds_data[0][0] = 0x40000000; + msg->ddr_cmds_data[0][1] = 0x40000000; + msg->ddr_cmds_data[0][2] = 0x40000000; /* - * The sdm845 GMU doesn't do bus frequency scaling on its own but it - * does need at least one entry in the list because it might be accessed - * when the GMU is shutting down. Send a single "off" entry. + * These are the CX (CNOC) votes - these are used by the GMU but the + * votes are known and fixed for the target */ + msg->cnoc_cmds_num = 1; + msg->cnoc_wait_bitmask = 0x01; - msg.bw_level_num = 1; + msg->cnoc_cmds_addrs[0] = 0x5007c; + msg->cnoc_cmds_data[0][0] = 0x40000000; + msg->cnoc_cmds_data[1][0] = 0x60000001; +} - msg.ddr_cmds_num = 3; - msg.ddr_wait_bitmask = 0x07; +static void a6xx_build_bw_table(struct a6xx_hfi_msg_bw_table *msg) +{ + /* Send a single "off" entry since the 630 GMU doesn't do bus scaling */ + msg->bw_level_num = 1; - msg.ddr_cmds_addrs[0] = 0x50000; - msg.ddr_cmds_addrs[1] = 0x5005c; - msg.ddr_cmds_addrs[2] = 0x5000c; + msg->ddr_cmds_num = 3; + msg->ddr_wait_bitmask = 0x07; - msg.ddr_cmds_data[0][0] = 0x40000000; - msg.ddr_cmds_data[0][1] = 0x40000000; - msg.ddr_cmds_data[0][2] = 0x40000000; + msg->ddr_cmds_addrs[0] = 0x50000; + msg->ddr_cmds_addrs[1] = 0x5005c; + msg->ddr_cmds_addrs[2] = 0x5000c; + + msg->ddr_cmds_data[0][0] = 0x40000000; + msg->ddr_cmds_data[0][1] = 0x40000000; + msg->ddr_cmds_data[0][2] = 0x40000000; /* * These are the CX (CNOC) votes. This is used but the values for the * sdm845 GMU are known and fixed so we can hard code them. */ - msg.cnoc_cmds_num = 3; - msg.cnoc_wait_bitmask = 0x05; + msg->cnoc_cmds_num = 3; + msg->cnoc_wait_bitmask = 0x05; - msg.cnoc_cmds_addrs[0] = 0x50034; - msg.cnoc_cmds_addrs[1] = 0x5007c; - msg.cnoc_cmds_addrs[2] = 0x5004c; + msg->cnoc_cmds_addrs[0] = 0x50034; + msg->cnoc_cmds_addrs[1] = 0x5007c; + msg->cnoc_cmds_addrs[2] = 0x5004c; - msg.cnoc_cmds_data[0][0] = 0x40000000; - msg.cnoc_cmds_data[0][1] = 0x00000000; - msg.cnoc_cmds_data[0][2] = 0x40000000; + msg->cnoc_cmds_data[0][0] = 0x40000000; + msg->cnoc_cmds_data[0][1] = 0x00000000; + msg->cnoc_cmds_data[0][2] = 0x40000000; - msg.cnoc_cmds_data[1][0] = 0x60000001; - msg.cnoc_cmds_data[1][1] = 0x20000001; - msg.cnoc_cmds_data[1][2] = 0x60000001; + msg->cnoc_cmds_data[1][0] = 0x60000001; + msg->cnoc_cmds_data[1][1] = 0x20000001; + msg->cnoc_cmds_data[1][2] = 0x60000001; +} + + +static int a6xx_hfi_send_bw_table(struct a6xx_gmu *gmu) +{ + struct a6xx_hfi_msg_bw_table msg = { 0 }; + struct a6xx_gpu *a6xx_gpu = container_of(gmu, struct a6xx_gpu, gmu); + struct adreno_gpu *adreno_gpu = &a6xx_gpu->base; + + if (adreno_is_a618(adreno_gpu)) + a618_build_bw_table(&msg); + else + a6xx_build_bw_table(&msg); return a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_BW_TABLE, &msg, sizeof(msg), NULL, 0); From 9cc68ee1d92e3ab5bd5c821e5c1f387b0e16a669 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Wed, 5 Feb 2020 13:48:17 -0700 Subject: [PATCH 07/10] drm/msm: Fix a6xx GMU shutdown sequence Commit e812744c5f95 ("drm: msm: a6xx: Add support for A618") missed updating the VBIF flush in a6xx_gmu_shutdown and instead inserted the new sequence into a6xx_pm_suspend along with a redundant GMU idle. Move a6xx_bus_clear_pending_transactions to a6xx_gmu.c and use it in the appropriate place in the shutdown routine and remove the redundant idle call. v2: Remove newly unused variable that was triggering a warning Signed-off-by: Jordan Crouse Reviewed-by: Rob Clark Fixes: e812744c5f95 ("drm: msm: a6xx: Add support for A618") Tested-by: Douglas Anderson Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 37 +++++++++++++++++++---- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 43 --------------------------- 2 files changed, 31 insertions(+), 49 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c index 983afeaee737..748cd379065f 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c @@ -796,12 +796,41 @@ bool a6xx_gmu_isidle(struct a6xx_gmu *gmu) return true; } +#define GBIF_CLIENT_HALT_MASK BIT(0) +#define GBIF_ARB_HALT_MASK BIT(1) + +static void a6xx_bus_clear_pending_transactions(struct adreno_gpu *adreno_gpu) +{ + struct msm_gpu *gpu = &adreno_gpu->base; + + if (!a6xx_has_gbif(adreno_gpu)) { + gpu_write(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL0, 0xf); + spin_until((gpu_read(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL1) & + 0xf) == 0xf); + gpu_write(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL0, 0); + + return; + } + + /* Halt new client requests on GBIF */ + gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_CLIENT_HALT_MASK); + spin_until((gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK) & + (GBIF_CLIENT_HALT_MASK)) == GBIF_CLIENT_HALT_MASK); + + /* Halt all AXI requests on GBIF */ + gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_ARB_HALT_MASK); + spin_until((gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK) & + (GBIF_ARB_HALT_MASK)) == GBIF_ARB_HALT_MASK); + + /* The GBIF halt needs to be explicitly cleared */ + gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0); +} + /* Gracefully try to shut down the GMU and by extension the GPU */ static void a6xx_gmu_shutdown(struct a6xx_gmu *gmu) { struct a6xx_gpu *a6xx_gpu = container_of(gmu, struct a6xx_gpu, gmu); struct adreno_gpu *adreno_gpu = &a6xx_gpu->base; - struct msm_gpu *gpu = &adreno_gpu->base; u32 val; /* @@ -819,11 +848,7 @@ static void a6xx_gmu_shutdown(struct a6xx_gmu *gmu) return; } - /* Clear the VBIF pipe before shutting down */ - gpu_write(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL0, 0xf); - spin_until((gpu_read(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL1) & 0xf) - == 0xf); - gpu_write(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL0, 0); + a6xx_bus_clear_pending_transactions(adreno_gpu); /* tell the GMU we want to slumber */ a6xx_gmu_notify_slumber(gmu); diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index 7c449d154b4d..68af24150de5 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -738,39 +738,6 @@ static const u32 a6xx_register_offsets[REG_ADRENO_REGISTER_MAX] = { REG_ADRENO_DEFINE(REG_ADRENO_CP_RB_CNTL, REG_A6XX_CP_RB_CNTL), }; -#define GBIF_CLIENT_HALT_MASK BIT(0) -#define GBIF_ARB_HALT_MASK BIT(1) - -static void a6xx_bus_clear_pending_transactions(struct adreno_gpu *adreno_gpu) -{ - struct msm_gpu *gpu = &adreno_gpu->base; - - if(!a6xx_has_gbif(adreno_gpu)){ - gpu_write(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL0, 0xf); - spin_until((gpu_read(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL1) & - 0xf) == 0xf); - gpu_write(gpu, REG_A6XX_VBIF_XIN_HALT_CTRL0, 0); - - return; - } - - /* Halt new client requests on GBIF */ - gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_CLIENT_HALT_MASK); - spin_until((gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK) & - (GBIF_CLIENT_HALT_MASK)) == GBIF_CLIENT_HALT_MASK); - - /* Halt all AXI requests on GBIF */ - gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_ARB_HALT_MASK); - spin_until((gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK) & - (GBIF_ARB_HALT_MASK)) == GBIF_ARB_HALT_MASK); - - /* - * GMU needs DDR access in slumber path. Deassert GBIF halt now - * to allow for GMU to access system memory. - */ - gpu_write(gpu, REG_A6XX_GBIF_HALT, 0x0); -} - static int a6xx_pm_resume(struct msm_gpu *gpu) { struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); @@ -795,16 +762,6 @@ static int a6xx_pm_suspend(struct msm_gpu *gpu) devfreq_suspend_device(gpu->devfreq.devfreq); - /* - * Make sure the GMU is idle before continuing (because some transitions - * may use VBIF - */ - a6xx_gmu_wait_for_idle(&a6xx_gpu->gmu); - - /* Clear the VBIF pipe before shutting down */ - /* FIXME: This accesses the GPU - do we need to make sure it is on? */ - a6xx_bus_clear_pending_transactions(adreno_gpu); - return a6xx_gmu_stop(a6xx_gpu); } From a1028dcfd0dd97884072288d0c8ed7f30399b528 Mon Sep 17 00:00:00 2001 From: Harigovindan P Date: Thu, 6 Feb 2020 14:26:15 +0530 Subject: [PATCH 08/10] drm/msm/dsi: save pll state before dsi host is powered off Save pll state before dsi host is powered off. Without this change some register values gets resetted. Signed-off-by: Harigovindan P Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi_manager.c | 5 +++++ drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 4 ---- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index acc711fd14f8..4864b9558f65 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -506,6 +506,7 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); struct mipi_dsi_host *host = msm_dsi->host; struct drm_panel *panel = msm_dsi->panel; + struct msm_dsi_pll *src_pll; bool is_dual_dsi = IS_DUAL_DSI(); int ret; @@ -539,6 +540,10 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) id, ret); } + /* Save PLL status if it is a clock source */ + src_pll = msm_dsi_phy_get_pll(msm_dsi->phy); + msm_dsi_pll_save_state(src_pll); + ret = msm_dsi_host_power_off(host); if (ret) pr_err("%s: host %d power off failed,%d\n", __func__, id, ret); diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index b0cfa67d2a57..f509ebd77500 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -724,10 +724,6 @@ void msm_dsi_phy_disable(struct msm_dsi_phy *phy) if (!phy || !phy->cfg->ops.disable) return; - /* Save PLL status if it is a clock source */ - if (phy->usecase != MSM_DSI_PHY_SLAVE) - msm_dsi_pll_save_state(phy->pll); - phy->cfg->ops.disable(phy); dsi_phy_regulator_disable(phy); From c6659785dfb3f8d75f1fe637e4222ff8178f5280 Mon Sep 17 00:00:00 2001 From: Harigovindan P Date: Thu, 6 Feb 2020 14:42:01 +0530 Subject: [PATCH 09/10] drm/msm/dsi/pll: call vco set rate explicitly For a given byte clock, if VCO recalc value is exactly same as vco set rate value, vco_set_rate does not get called assuming VCO is already set to required value. But Due to GDSC toggle, VCO values are erased in the HW. To make sure VCO is programmed correctly, we forcefully call set_rate from vco_prepare. Signed-off-by: Harigovindan P Reviewed-by: Jeffrey Hugo Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c index 1c894548dd72..6ac04fc303f5 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c @@ -411,6 +411,12 @@ static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw) if (pll_10nm->slave) dsi_pll_enable_pll_bias(pll_10nm->slave); + rc = dsi_pll_10nm_vco_set_rate(hw,pll_10nm->vco_current_rate, 0); + if (rc) { + pr_err("vco_set_rate failed, rc=%d\n", rc); + return rc; + } + /* Start PLL */ pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0x01); From 8fc7036ee652207ca992fbb9abb64090c355a9e0 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 13 Feb 2020 12:01:35 -0800 Subject: [PATCH 10/10] drm/msm/dpu: fix BGR565 vs RGB565 confusion The component order between the two was swapped, resulting in incorrect color when games with 565 visual hit the overlay path instead of GPU composition. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Rob Clark Reviewed-by: Sean Paul Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c index 528632690f1e..a05282dede91 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c @@ -255,13 +255,13 @@ static const struct dpu_format dpu_format_map[] = { INTERLEAVED_RGB_FMT(RGB565, 0, COLOR_5BIT, COLOR_6BIT, COLOR_5BIT, - C2_R_Cr, C0_G_Y, C1_B_Cb, 0, 3, + C1_B_Cb, C0_G_Y, C2_R_Cr, 0, 3, false, 2, 0, DPU_FETCH_LINEAR, 1), INTERLEAVED_RGB_FMT(BGR565, 0, COLOR_5BIT, COLOR_6BIT, COLOR_5BIT, - C1_B_Cb, C0_G_Y, C2_R_Cr, 0, 3, + C2_R_Cr, C0_G_Y, C1_B_Cb, 0, 3, false, 2, 0, DPU_FETCH_LINEAR, 1),