au1000-eth: prefix all functions with au1000_

In order to avoid namespace clashes, prefix all internal driver functions
with au1000_.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Florian Fainelli 2010-04-06 22:09:01 +00:00 committed by David S. Miller
parent 13130c7a99
commit eb0496308f

View File

@ -149,7 +149,7 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
* specific irq-map
*/
static void enable_mac(struct net_device *dev, int force_reset)
static void au1000_enable_mac(struct net_device *dev, int force_reset)
{
unsigned long flags;
struct au1000_private *aup = netdev_priv(dev);
@ -237,7 +237,7 @@ static int au1000_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
* _NOT_ hold (e.g. when PHY is accessed through other MAC's MII bus) */
struct net_device *const dev = bus->priv;
enable_mac(dev, 0); /* make sure the MAC associated with this
au1000_enable_mac(dev, 0); /* make sure the MAC associated with this
* mii_bus is enabled */
return au1000_mdio_read(dev, phy_addr, regnum);
}
@ -247,7 +247,7 @@ static int au1000_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
{
struct net_device *const dev = bus->priv;
enable_mac(dev, 0); /* make sure the MAC associated with this
au1000_enable_mac(dev, 0); /* make sure the MAC associated with this
* mii_bus is enabled */
au1000_mdio_write(dev, phy_addr, regnum, value);
return 0;
@ -257,12 +257,12 @@ static int au1000_mdiobus_reset(struct mii_bus *bus)
{
struct net_device *const dev = bus->priv;
enable_mac(dev, 0); /* make sure the MAC associated with this
au1000_enable_mac(dev, 0); /* make sure the MAC associated with this
* mii_bus is enabled */
return 0;
}
static void hard_stop(struct net_device *dev)
static void au1000_hard_stop(struct net_device *dev)
{
struct au1000_private *aup = netdev_priv(dev);
@ -273,7 +273,7 @@ static void hard_stop(struct net_device *dev)
au_sync_delay(10);
}
static void enable_rx_tx(struct net_device *dev)
static void au1000_enable_rx_tx(struct net_device *dev)
{
struct au1000_private *aup = netdev_priv(dev);
@ -320,7 +320,7 @@ au1000_adjust_link(struct net_device *dev)
// duplex mode changed
/* switching duplex mode requires to disable rx and tx! */
hard_stop(dev);
au1000_hard_stop(dev);
if (DUPLEX_FULL == phydev->duplex)
aup->mac->control = ((aup->mac->control
@ -332,7 +332,7 @@ au1000_adjust_link(struct net_device *dev)
| MAC_DISABLE_RX_OWN);
au_sync_delay(1);
enable_rx_tx(dev);
au1000_enable_rx_tx(dev);
aup->old_duplex = phydev->duplex;
status_change = 1;
@ -363,7 +363,7 @@ au1000_adjust_link(struct net_device *dev)
}
}
static int mii_probe (struct net_device *dev)
static int au1000_mii_probe (struct net_device *dev)
{
struct au1000_private *const aup = netdev_priv(dev);
struct phy_device *phydev = NULL;
@ -463,7 +463,7 @@ static int mii_probe (struct net_device *dev)
* has the virtual and dma address of a buffer suitable for
* both, receive and transmit operations.
*/
static db_dest_t *GetFreeDB(struct au1000_private *aup)
static db_dest_t *au1000_GetFreeDB(struct au1000_private *aup)
{
db_dest_t *pDB;
pDB = aup->pDBfree;
@ -474,7 +474,7 @@ static db_dest_t *GetFreeDB(struct au1000_private *aup)
return pDB;
}
void ReleaseDB(struct au1000_private *aup, db_dest_t *pDB)
void au1000_ReleaseDB(struct au1000_private *aup, db_dest_t *pDB)
{
db_dest_t *pDBfree = aup->pDBfree;
if (pDBfree)
@ -482,12 +482,12 @@ void ReleaseDB(struct au1000_private *aup, db_dest_t *pDB)
aup->pDBfree = pDB;
}
static void reset_mac_unlocked(struct net_device *dev)
static void au1000_reset_mac_unlocked(struct net_device *dev)
{
struct au1000_private *const aup = netdev_priv(dev);
int i;
hard_stop(dev);
au1000_hard_stop(dev);
*aup->enable = MAC_EN_CLOCK_ENABLE;
au_sync_delay(2);
@ -508,7 +508,7 @@ static void reset_mac_unlocked(struct net_device *dev)
}
static void reset_mac(struct net_device *dev)
static void au1000_reset_mac(struct net_device *dev)
{
struct au1000_private *const aup = netdev_priv(dev);
unsigned long flags;
@ -519,7 +519,7 @@ static void reset_mac(struct net_device *dev)
spin_lock_irqsave(&aup->lock, flags);
reset_mac_unlocked (dev);
au1000_reset_mac_unlocked (dev);
spin_unlock_irqrestore(&aup->lock, flags);
}
@ -530,7 +530,7 @@ static void reset_mac(struct net_device *dev)
* these are not descriptors sitting in memory.
*/
static void
setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base)
au1000_setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base)
{
int i;
@ -611,7 +611,7 @@ static int au1000_init(struct net_device *dev)
printk("%s: au1000_init\n", dev->name);
/* bring the device out of reset */
enable_mac(dev, 1);
au1000_enable_mac(dev, 1);
spin_lock_irqsave(&aup->lock, flags);
@ -650,7 +650,7 @@ static int au1000_init(struct net_device *dev)
return 0;
}
static inline void update_rx_stats(struct net_device *dev, u32 status)
static inline void au1000_update_rx_stats(struct net_device *dev, u32 status)
{
struct net_device_stats *ps = &dev->stats;
@ -694,7 +694,7 @@ static int au1000_rx(struct net_device *dev)
while (buff_stat & RX_T_DONE) {
status = prxd->status;
pDB = aup->rx_db_inuse[aup->rx_head];
update_rx_stats(dev, status);
au1000_update_rx_stats(dev, status);
if (!(status & RX_ERROR)) {
/* good frame */
@ -748,7 +748,7 @@ static int au1000_rx(struct net_device *dev)
return 0;
}
static void update_tx_stats(struct net_device *dev, u32 status)
static void au1000_update_tx_stats(struct net_device *dev, u32 status)
{
struct au1000_private *aup = netdev_priv(dev);
struct net_device_stats *ps = &dev->stats;
@ -784,7 +784,7 @@ static void au1000_tx_ack(struct net_device *dev)
ptxd = aup->tx_dma_ring[aup->tx_tail];
while (ptxd->buff_stat & TX_T_DONE) {
update_tx_stats(dev, ptxd->status);
au1000_update_tx_stats(dev, ptxd->status);
ptxd->buff_stat &= ~TX_T_DONE;
ptxd->len = 0;
au_sync();
@ -861,7 +861,7 @@ static int au1000_close(struct net_device *dev)
spin_lock_irqsave(&aup->lock, flags);
reset_mac_unlocked (dev);
au1000_reset_mac_unlocked (dev);
/* stop the device */
netif_stop_queue(dev);
@ -899,7 +899,7 @@ static netdev_tx_t au1000_tx(struct sk_buff *skb, struct net_device *dev)
return NETDEV_TX_BUSY;
}
else if (buff_stat & TX_T_DONE) {
update_tx_stats(dev, ptxd->status);
au1000_update_tx_stats(dev, ptxd->status);
ptxd->len = 0;
}
@ -937,7 +937,7 @@ static netdev_tx_t au1000_tx(struct sk_buff *skb, struct net_device *dev)
static void au1000_tx_timeout(struct net_device *dev)
{
printk(KERN_ERR "%s: au1000_tx_timeout: dev=%p\n", dev->name, dev);
reset_mac(dev);
au1000_reset_mac(dev);
au1000_init(dev);
dev->trans_start = jiffies;
netif_wake_queue(dev);
@ -1089,9 +1089,9 @@ static int __devinit au1000_probe(struct platform_device *pdev)
/* Use the hard coded MAC addresses */
}
setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
au1000_setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
} else if (pdev->id == 1)
setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
au1000_setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
/*
* Assign to the Ethernet ports two consecutive MAC addresses
@ -1153,7 +1153,7 @@ static int __devinit au1000_probe(struct platform_device *pdev)
goto err_mdiobus_reg;
}
if (mii_probe(dev) != 0)
if (au1000_mii_probe(dev) != 0)
goto err_out;
pDBfree = NULL;
@ -1169,7 +1169,7 @@ static int __devinit au1000_probe(struct platform_device *pdev)
aup->pDBfree = pDBfree;
for (i = 0; i < NUM_RX_DMA; i++) {
pDB = GetFreeDB(aup);
pDB = au1000_GetFreeDB(aup);
if (!pDB) {
goto err_out;
}
@ -1177,7 +1177,7 @@ static int __devinit au1000_probe(struct platform_device *pdev)
aup->rx_db_inuse[i] = pDB;
}
for (i = 0; i < NUM_TX_DMA; i++) {
pDB = GetFreeDB(aup);
pDB = au1000_GetFreeDB(aup);
if (!pDB) {
goto err_out;
}
@ -1196,7 +1196,7 @@ static int __devinit au1000_probe(struct platform_device *pdev)
* The boot code uses the ethernet controller, so reset it to start
* fresh. au1000_init() expects that the device is in reset state.
*/
reset_mac(dev);
au1000_reset_mac(dev);
err = register_netdev(dev);
if (err) {
@ -1218,15 +1218,15 @@ err_out:
/* here we should have a valid dev plus aup-> register addresses
* so we can reset the mac properly.*/
reset_mac(dev);
au1000_reset_mac(dev);
for (i = 0; i < NUM_RX_DMA; i++) {
if (aup->rx_db_inuse[i])
ReleaseDB(aup, aup->rx_db_inuse[i]);
au1000_ReleaseDB(aup, aup->rx_db_inuse[i]);
}
for (i = 0; i < NUM_TX_DMA; i++) {
if (aup->tx_db_inuse[i])
ReleaseDB(aup, aup->tx_db_inuse[i]);
au1000_ReleaseDB(aup, aup->tx_db_inuse[i]);
}
err_mdiobus_reg:
mdiobus_free(aup->mii_bus);
@ -1262,11 +1262,11 @@ static int __devexit au1000_remove(struct platform_device *pdev)
for (i = 0; i < NUM_RX_DMA; i++)
if (aup->rx_db_inuse[i])
ReleaseDB(aup, aup->rx_db_inuse[i]);
au1000_ReleaseDB(aup, aup->rx_db_inuse[i]);
for (i = 0; i < NUM_TX_DMA; i++)
if (aup->tx_db_inuse[i])
ReleaseDB(aup, aup->tx_db_inuse[i]);
au1000_ReleaseDB(aup, aup->tx_db_inuse[i]);
dma_free_noncoherent(NULL, MAX_BUF_SIZE *
(NUM_TX_BUFFS + NUM_RX_BUFFS),