mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-12 13:34:10 +08:00
Update devfreq next for v5.13
Detailed description for this pull request: 1. Update devfreq core - Register devfreq as a cooling device when adding devfreq device basically if the flag of devfreq device is set as cooling device. - Add missing unlock opeation in devfreq_add_device - Use the next frequency as resume_freq instead of previous frequency when using opp-suspend property - Check whether .get_dev_status in struct devfreq_dev_profile is implemented or not by devfreq driver before calling .get_dev_status function. 2. Update devfreq driver - Use dev_err_probe to simplify the error handling on rk3399_dmc.c - Remove unused .get_dev_status function on imx8m-ddrc.c because imx8m_ddrc_get_dev_status has not returend the any current status of device. - Remove unneeded of_match_ptr() from imx-bus.c and imx8m-ddrc.ca - Add missing phandle informatioon and replace undefined variable with integer value for rk3399_dmc.txt devicetree binding document. 3. Update minor issue - Fix the wrong set_freq path of userspace governor in drivers/devfreq/Kconfig - Remove the invalid description from .get_target_freq in struct devfreq_dev_profile -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEsSpuqBtbWtRe4rLGnM3fLN7rz1MFAmBuoFEWHGN3MDAuY2hv aUBzYW1zdW5nLmNvbQAKCRCczd8s3uvPUxEwD/9yc4/ErDCPYzEmZsw429RfF+mB suZG1XovzynS8tlxSlHtwVGs8uufZNaHAW+I3xtGSE4oSVp44vyKX468WRbs4aRB qxpMdChzjR7p7bS74kVdRfj2/wSs5fhFWVILZx6W46SyYKNOeK6zSW+j8mKHREBf kTU2KbY3cxas5iGDG6/xBmpgP9+L4/e3EaMgiKIk9LNKT/KO3RcKvdGDvl/yqrKj PedaZCGbYQg57xMO6PIHZBRRkx+tfPeHA4UVQS4eCtcNG8NAGySiOwDjwa0uz6yJ RND1iB5fGQXpfG/3h45gUybdDflB9V8TBmTeYT02GxAUuFhDv1uB3/EW6MF9xkRl uYvP0KfOo7sCMWf6iZTd+ak4TZuOeoZjiB5F43/HbN31ck1AtZA0yCNKc23dV7Fx +KnNpYsPyELIcnf5eT0jNQH5UeWldMFOwex7vhMcRPUjWgIhQUcA0Zsoq0+89vP5 bN4UUOTybadKlHzWme+0G7W5Y0mAKOyg/ATqzrBfptby6ZTp62OfJvmT8KsbziQJ hgNAH/1VDdKcrU5ctTfLKfghADrbqRnk7FKJGNayb0TA2Ntne0GIVLTl2kc935Lw VJFzIsy2Irs09DQYDY9+WW6106BjpS4wNANuEbps0DrNDXPmSCCtRzjTbPkdLEV6 fUiQqUaL4N6p80YO2g== =iKkL -----END PGP SIGNATURE----- Merge tag 'devfreq-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq updates for v5.13 from Chanwoo Choi: "1. Update devfreq core - Register devfreq as a cooling device when adding devfreq device, basically if the flag of devfreq device is set as cooling device. - Add missing unlock opeation in devfreq_add_device - Use the next frequency as resume_freq instead of previous frequency when using opp-suspend property - Check whether .get_dev_status in struct devfreq_dev_profile is implemented or not by devfreq driver before calling .get_dev_status function. 2. Update devfreq drivers - Use dev_err_probe to simplify the error handling on rk3399_dmc.c - Remove unused .get_dev_status function on imx8m-ddrc.c because imx8m_ddrc_get_dev_status has not returend the any current status of the device. - Remove unneeded of_match_ptr() from imx-bus.c and imx8m-ddrc.ca - Add missing phandle informatioon and replace undefined variable with integer value for rk3399_dmc.txt devicetree binding document. 3. Fix minor issues - Fix the wrong set_freq path of userspace governor in drivers/devfreq/Kconfig. - Remove the invalid description from .get_target_freq in struct devfreq_dev_profile." * tag 'devfreq-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: imx8m-ddrc: Remove unneeded of_match_ptr() PM / devfreq: imx-bus: Remove unneeded of_match_ptr() PM / devfreq: imx8m-ddrc: Remove imx8m_ddrc_get_dev_status PM / devfreq: Remove the invalid description for get_target_freq PM / devfreq: Check get_dev_status in devfreq_update_stats PM / devfreq: Fix the wrong set_freq path for userspace governor in Kconfig dt-bindings: devfreq: rk3399_dmc: Remove references of unexistant defines dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle. PM / devfreq: rk3399_dmc: Simplify with dev_err_probe() PM / devfreq: Use more accurate returned new_freq as resume_freq PM / devfreq: Unlock mutex and free devfreq struct in error path PM / devfreq: Register devfreq as a cooling device on demand
This commit is contained in:
commit
e9ff02264d
@ -97,10 +97,7 @@ Description:
|
||||
object. The values are represented in ms. If the value is
|
||||
less than 1 jiffy, it is considered to be 0, which means
|
||||
no polling. This value is meaningless if the governor is
|
||||
not polling; thus. If the governor is not using
|
||||
devfreq-provided central polling
|
||||
(/sys/class/devfreq/.../central_polling is 0), this value
|
||||
may be useless.
|
||||
not polling.
|
||||
|
||||
A list of governors that support the node:
|
||||
- simple_ondmenad
|
||||
|
@ -12,6 +12,8 @@ Required properties:
|
||||
for details.
|
||||
- center-supply: DMC supply node.
|
||||
- status: Marks the node enabled/disabled.
|
||||
- rockchip,pmu: Phandle to the syscon managing the "PMU general register
|
||||
files".
|
||||
|
||||
Optional properties:
|
||||
- interrupts: The CPU interrupt number. The interrupt specifier
|
||||
@ -77,24 +79,23 @@ Following properties relate to DDR timing:
|
||||
|
||||
- rockchip,ddr3_drv : When the DRAM type is DDR3, this parameter defines
|
||||
the DRAM side driver strength in ohms. Default
|
||||
value is DDR3_DS_40ohm.
|
||||
value is 40.
|
||||
|
||||
- rockchip,ddr3_odt : When the DRAM type is DDR3, this parameter defines
|
||||
the DRAM side ODT strength in ohms. Default value
|
||||
is DDR3_ODT_120ohm.
|
||||
is 120.
|
||||
|
||||
- rockchip,phy_ddr3_ca_drv : When the DRAM type is DDR3, this parameter defines
|
||||
the phy side CA line (incluing command line,
|
||||
address line and clock line) driver strength.
|
||||
Default value is PHY_DRV_ODT_40.
|
||||
Default value is 40.
|
||||
|
||||
- rockchip,phy_ddr3_dq_drv : When the DRAM type is DDR3, this parameter defines
|
||||
the PHY side DQ line (including DQS/DQ/DM line)
|
||||
driver strength. Default value is PHY_DRV_ODT_40.
|
||||
driver strength. Default value is 40.
|
||||
|
||||
- rockchip,phy_ddr3_odt : When the DRAM type is DDR3, this parameter defines
|
||||
the PHY side ODT strength. Default value is
|
||||
PHY_DRV_ODT_240.
|
||||
the PHY side ODT strength. Default value is 240.
|
||||
|
||||
- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines
|
||||
then ODT disable frequency in MHz (Mega Hz).
|
||||
@ -104,25 +105,23 @@ Following properties relate to DDR timing:
|
||||
|
||||
- rockchip,lpddr3_drv : When the DRAM type is LPDDR3, this parameter defines
|
||||
the DRAM side driver strength in ohms. Default
|
||||
value is LP3_DS_34ohm.
|
||||
value is 34.
|
||||
|
||||
- rockchip,lpddr3_odt : When the DRAM type is LPDDR3, this parameter defines
|
||||
the DRAM side ODT strength in ohms. Default value
|
||||
is LP3_ODT_240ohm.
|
||||
is 240.
|
||||
|
||||
- rockchip,phy_lpddr3_ca_drv : When the DRAM type is LPDDR3, this parameter defines
|
||||
the PHY side CA line (including command line,
|
||||
address line and clock line) driver strength.
|
||||
Default value is PHY_DRV_ODT_40.
|
||||
Default value is 40.
|
||||
|
||||
- rockchip,phy_lpddr3_dq_drv : When the DRAM type is LPDDR3, this parameter defines
|
||||
the PHY side DQ line (including DQS/DQ/DM line)
|
||||
driver strength. Default value is
|
||||
PHY_DRV_ODT_40.
|
||||
driver strength. Default value is 40.
|
||||
|
||||
- rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define
|
||||
the phy side odt strength, default value is
|
||||
PHY_DRV_ODT_240.
|
||||
the phy side odt strength, default value is 240.
|
||||
|
||||
- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter
|
||||
defines the ODT disable frequency in
|
||||
@ -132,32 +131,30 @@ Following properties relate to DDR timing:
|
||||
|
||||
- rockchip,lpddr4_drv : When the DRAM type is LPDDR4, this parameter defines
|
||||
the DRAM side driver strength in ohms. Default
|
||||
value is LP4_PDDS_60ohm.
|
||||
value is 60.
|
||||
|
||||
- rockchip,lpddr4_dq_odt : When the DRAM type is LPDDR4, this parameter defines
|
||||
the DRAM side ODT on DQS/DQ line strength in ohms.
|
||||
Default value is LP4_DQ_ODT_40ohm.
|
||||
Default value is 40.
|
||||
|
||||
- rockchip,lpddr4_ca_odt : When the DRAM type is LPDDR4, this parameter defines
|
||||
the DRAM side ODT on CA line strength in ohms.
|
||||
Default value is LP4_CA_ODT_40ohm.
|
||||
Default value is 40.
|
||||
|
||||
- rockchip,phy_lpddr4_ca_drv : When the DRAM type is LPDDR4, this parameter defines
|
||||
the PHY side CA line (including command address
|
||||
line) driver strength. Default value is
|
||||
PHY_DRV_ODT_40.
|
||||
line) driver strength. Default value is 40.
|
||||
|
||||
- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
|
||||
the PHY side clock line and CS line driver
|
||||
strength. Default value is PHY_DRV_ODT_80.
|
||||
strength. Default value is 80.
|
||||
|
||||
- rockchip,phy_lpddr4_dq_drv : When the DRAM type is LPDDR4, this parameter defines
|
||||
the PHY side DQ line (including DQS/DQ/DM line)
|
||||
driver strength. Default value is PHY_DRV_ODT_80.
|
||||
driver strength. Default value is 80.
|
||||
|
||||
- rockchip,phy_lpddr4_odt : When the DRAM type is LPDDR4, this parameter defines
|
||||
the PHY side ODT strength. Default value is
|
||||
PHY_DRV_ODT_60.
|
||||
the PHY side ODT strength. Default value is 60.
|
||||
|
||||
Example:
|
||||
dmc_opp_table: dmc_opp_table {
|
||||
@ -193,23 +190,23 @@ Example:
|
||||
rockchip,phy_dll_dis_freq = <125>;
|
||||
rockchip,auto_pd_dis_freq = <666>;
|
||||
rockchip,ddr3_odt_dis_freq = <333>;
|
||||
rockchip,ddr3_drv = <DDR3_DS_40ohm>;
|
||||
rockchip,ddr3_odt = <DDR3_ODT_120ohm>;
|
||||
rockchip,phy_ddr3_ca_drv = <PHY_DRV_ODT_40>;
|
||||
rockchip,phy_ddr3_dq_drv = <PHY_DRV_ODT_40>;
|
||||
rockchip,phy_ddr3_odt = <PHY_DRV_ODT_240>;
|
||||
rockchip,ddr3_drv = <40>;
|
||||
rockchip,ddr3_odt = <120>;
|
||||
rockchip,phy_ddr3_ca_drv = <40>;
|
||||
rockchip,phy_ddr3_dq_drv = <40>;
|
||||
rockchip,phy_ddr3_odt = <240>;
|
||||
rockchip,lpddr3_odt_dis_freq = <333>;
|
||||
rockchip,lpddr3_drv = <LP3_DS_34ohm>;
|
||||
rockchip,lpddr3_odt = <LP3_ODT_240ohm>;
|
||||
rockchip,phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>;
|
||||
rockchip,phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>;
|
||||
rockchip,phy_lpddr3_odt = <PHY_DRV_ODT_240>;
|
||||
rockchip,lpddr3_drv = <34>;
|
||||
rockchip,lpddr3_odt = <240>;
|
||||
rockchip,phy_lpddr3_ca_drv = <40>;
|
||||
rockchip,phy_lpddr3_dq_drv = <40>;
|
||||
rockchip,phy_lpddr3_odt = <240>;
|
||||
rockchip,lpddr4_odt_dis_freq = <333>;
|
||||
rockchip,lpddr4_drv = <LP4_PDDS_60ohm>;
|
||||
rockchip,lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>;
|
||||
rockchip,lpddr4_ca_odt = <LP4_CA_ODT_40ohm>;
|
||||
rockchip,phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>;
|
||||
rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
|
||||
rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
|
||||
rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>;
|
||||
rockchip,lpddr4_drv = <60>;
|
||||
rockchip,lpddr4_dq_odt = <40>;
|
||||
rockchip,lpddr4_ca_odt = <40>;
|
||||
rockchip,phy_lpddr4_ca_drv = <40>;
|
||||
rockchip,phy_lpddr4_ck_cs_drv = <80>;
|
||||
rockchip,phy_lpddr4_dq_drv = <80>;
|
||||
rockchip,phy_lpddr4_odt = <60>;
|
||||
};
|
||||
|
@ -62,7 +62,7 @@ config DEVFREQ_GOV_USERSPACE
|
||||
help
|
||||
Sets the frequency at the user specified one.
|
||||
This governor returns the user configured frequency if there
|
||||
has been an input to /sys/devices/.../power/devfreq_set_freq.
|
||||
has been an input to /sys/devices/.../userspace/set_freq.
|
||||
Otherwise, the governor does not change the frequency
|
||||
given at the initialization.
|
||||
|
||||
|
@ -11,6 +11,7 @@
|
||||
#include <linux/kmod.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/debugfs.h>
|
||||
#include <linux/devfreq_cooling.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/init.h>
|
||||
@ -387,7 +388,7 @@ static int devfreq_set_target(struct devfreq *devfreq, unsigned long new_freq,
|
||||
devfreq->previous_freq = new_freq;
|
||||
|
||||
if (devfreq->suspend_freq)
|
||||
devfreq->resume_freq = cur_freq;
|
||||
devfreq->resume_freq = new_freq;
|
||||
|
||||
return err;
|
||||
}
|
||||
@ -821,7 +822,8 @@ struct devfreq *devfreq_add_device(struct device *dev,
|
||||
|
||||
if (devfreq->profile->timer < 0
|
||||
|| devfreq->profile->timer >= DEVFREQ_TIMER_NUM) {
|
||||
goto err_out;
|
||||
mutex_unlock(&devfreq->lock);
|
||||
goto err_dev;
|
||||
}
|
||||
|
||||
if (!devfreq->profile->max_state && !devfreq->profile->freq_table) {
|
||||
@ -935,6 +937,12 @@ struct devfreq *devfreq_add_device(struct device *dev,
|
||||
|
||||
mutex_unlock(&devfreq_list_lock);
|
||||
|
||||
if (devfreq->profile->is_cooling_device) {
|
||||
devfreq->cdev = devfreq_cooling_em_register(devfreq, NULL);
|
||||
if (IS_ERR(devfreq->cdev))
|
||||
devfreq->cdev = NULL;
|
||||
}
|
||||
|
||||
return devfreq;
|
||||
|
||||
err_init:
|
||||
@ -960,6 +968,8 @@ int devfreq_remove_device(struct devfreq *devfreq)
|
||||
if (!devfreq)
|
||||
return -EINVAL;
|
||||
|
||||
devfreq_cooling_unregister(devfreq->cdev);
|
||||
|
||||
if (devfreq->governor) {
|
||||
devfreq->governor->event_handler(devfreq,
|
||||
DEVFREQ_GOV_STOP, NULL);
|
||||
|
@ -57,8 +57,6 @@
|
||||
* Basically, get_target_freq will run
|
||||
* devfreq_dev_profile.get_dev_status() to get the
|
||||
* status of the device (load = busy_time / total_time).
|
||||
* If no_central_polling is set, this callback is called
|
||||
* only with update_devfreq() notified by OPP.
|
||||
* @event_handler: Callback for devfreq core framework to notify events
|
||||
* to governors. Events include per device governor
|
||||
* init and exit, opp changes out of devfreq, suspend
|
||||
@ -91,6 +89,9 @@ int devfreq_update_target(struct devfreq *devfreq, unsigned long freq);
|
||||
|
||||
static inline int devfreq_update_stats(struct devfreq *df)
|
||||
{
|
||||
if (!df->profile->get_dev_status)
|
||||
return -EINVAL;
|
||||
|
||||
return df->profile->get_dev_status(df->dev.parent, &df->last_status);
|
||||
}
|
||||
#endif /* _GOVERNOR_H */
|
||||
|
@ -169,7 +169,7 @@ static struct platform_driver imx_bus_platdrv = {
|
||||
.probe = imx_bus_probe,
|
||||
.driver = {
|
||||
.name = "imx-bus-devfreq",
|
||||
.of_match_table = of_match_ptr(imx_bus_of_match),
|
||||
.of_match_table = imx_bus_of_match,
|
||||
},
|
||||
};
|
||||
module_platform_driver(imx_bus_platdrv);
|
||||
|
@ -280,18 +280,6 @@ static int imx8m_ddrc_get_cur_freq(struct device *dev, unsigned long *freq)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int imx8m_ddrc_get_dev_status(struct device *dev,
|
||||
struct devfreq_dev_status *stat)
|
||||
{
|
||||
struct imx8m_ddrc *priv = dev_get_drvdata(dev);
|
||||
|
||||
stat->busy_time = 0;
|
||||
stat->total_time = 0;
|
||||
stat->current_frequency = clk_get_rate(priv->dram_core);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int imx8m_ddrc_init_freq_info(struct device *dev)
|
||||
{
|
||||
struct imx8m_ddrc *priv = dev_get_drvdata(dev);
|
||||
@ -429,9 +417,7 @@ static int imx8m_ddrc_probe(struct platform_device *pdev)
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
priv->profile.polling_ms = 1000;
|
||||
priv->profile.target = imx8m_ddrc_target;
|
||||
priv->profile.get_dev_status = imx8m_ddrc_get_dev_status;
|
||||
priv->profile.exit = imx8m_ddrc_exit;
|
||||
priv->profile.get_cur_freq = imx8m_ddrc_get_cur_freq;
|
||||
priv->profile.initial_freq = clk_get_rate(priv->dram_core);
|
||||
@ -461,7 +447,7 @@ static struct platform_driver imx8m_ddrc_platdrv = {
|
||||
.probe = imx8m_ddrc_probe,
|
||||
.driver = {
|
||||
.name = "imx8m-ddrc-devfreq",
|
||||
.of_match_table = of_match_ptr(imx8m_ddrc_of_match),
|
||||
.of_match_table = imx8m_ddrc_of_match,
|
||||
},
|
||||
};
|
||||
module_platform_driver(imx8m_ddrc_platdrv);
|
||||
|
@ -324,22 +324,14 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
|
||||
mutex_init(&data->lock);
|
||||
|
||||
data->vdd_center = devm_regulator_get(dev, "center");
|
||||
if (IS_ERR(data->vdd_center)) {
|
||||
if (PTR_ERR(data->vdd_center) == -EPROBE_DEFER)
|
||||
return -EPROBE_DEFER;
|
||||
|
||||
dev_err(dev, "Cannot get the regulator \"center\"\n");
|
||||
return PTR_ERR(data->vdd_center);
|
||||
}
|
||||
if (IS_ERR(data->vdd_center))
|
||||
return dev_err_probe(dev, PTR_ERR(data->vdd_center),
|
||||
"Cannot get the regulator \"center\"\n");
|
||||
|
||||
data->dmc_clk = devm_clk_get(dev, "dmc_clk");
|
||||
if (IS_ERR(data->dmc_clk)) {
|
||||
if (PTR_ERR(data->dmc_clk) == -EPROBE_DEFER)
|
||||
return -EPROBE_DEFER;
|
||||
|
||||
dev_err(dev, "Cannot get the clk dmc_clk\n");
|
||||
return PTR_ERR(data->dmc_clk);
|
||||
}
|
||||
if (IS_ERR(data->dmc_clk))
|
||||
return dev_err_probe(dev, PTR_ERR(data->dmc_clk),
|
||||
"Cannot get the clk dmc_clk\n");
|
||||
|
||||
data->edev = devfreq_event_get_edev_by_phandle(dev, "devfreq-events", 0);
|
||||
if (IS_ERR(data->edev))
|
||||
|
@ -38,6 +38,7 @@ enum devfreq_timer {
|
||||
|
||||
struct devfreq;
|
||||
struct devfreq_governor;
|
||||
struct thermal_cooling_device;
|
||||
|
||||
/**
|
||||
* struct devfreq_dev_status - Data given from devfreq user device to
|
||||
@ -98,11 +99,15 @@ struct devfreq_dev_status {
|
||||
* @freq_table: Optional list of frequencies to support statistics
|
||||
* and freq_table must be generated in ascending order.
|
||||
* @max_state: The size of freq_table.
|
||||
*
|
||||
* @is_cooling_device: A self-explanatory boolean giving the device a
|
||||
* cooling effect property.
|
||||
*/
|
||||
struct devfreq_dev_profile {
|
||||
unsigned long initial_freq;
|
||||
unsigned int polling_ms;
|
||||
enum devfreq_timer timer;
|
||||
bool is_cooling_device;
|
||||
|
||||
int (*target)(struct device *dev, unsigned long *freq, u32 flags);
|
||||
int (*get_dev_status)(struct device *dev,
|
||||
@ -156,6 +161,7 @@ struct devfreq_stats {
|
||||
* @suspend_count: suspend requests counter for a device.
|
||||
* @stats: Statistics of devfreq device behavior
|
||||
* @transition_notifier_list: list head of DEVFREQ_TRANSITION_NOTIFIER notifier
|
||||
* @cdev: Cooling device pointer if the devfreq has cooling property
|
||||
* @nb_min: Notifier block for DEV_PM_QOS_MIN_FREQUENCY
|
||||
* @nb_max: Notifier block for DEV_PM_QOS_MAX_FREQUENCY
|
||||
*
|
||||
@ -198,6 +204,9 @@ struct devfreq {
|
||||
|
||||
struct srcu_notifier_head transition_notifier_list;
|
||||
|
||||
/* Pointer to the cooling device if used for thermal mitigation */
|
||||
struct thermal_cooling_device *cdev;
|
||||
|
||||
struct notifier_block nb_min;
|
||||
struct notifier_block nb_max;
|
||||
};
|
||||
|
Loading…
Reference in New Issue
Block a user