korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-03 17:14:14 +08:00
Code Issues Packages Projects Releases Wiki Activity

scsi: g_NCR5380: End PDMA transfer correctly on target disconnection

Browse Source 
When an IRQ arrives during PDMA transfer, pread() and pwrite() return
without waiting for the 53C80 registers to be ready and this ends up
messing up the chip state. This was observed with SONY CDU-55S which is
slow enough to disconnect during 4096-byte reads.

IRQ during PDMA is not an error so don't return -1. Instead, store the
remaining byte count for use by NCR5380_dma_residual().

[Poll for the BASR_END_DMA_TRANSFER condition rather than remove the
error message -- F.T.]

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Ondrej Zary 2017-07-03 03:59:05 -04:00 committed by Martin K. Petersen
parent 12b859b706
commit e9dbadf788
1 changed files with 31 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
drivers/scsi/g_NCR5380.c
View File

@ -44,12 +44,13 @@
int c400_ctl_status; \
int c400_blk_cnt; \
int c400_host_buf; \
int io_width
int io_width; \
int pdma_residual
#define NCR5380_dma_xfer_len generic_NCR5380_dma_xfer_len
#define NCR5380_dma_recv_setup generic_NCR5380_pread
#define NCR5380_dma_send_setup generic_NCR5380_pwrite
#define NCR5380_dma_residual NCR5380_dma_residual_none
#define NCR5380_dma_residual generic_NCR5380_dma_residual
#define NCR5380_intr generic_NCR5380_intr
#define NCR5380_queue_command generic_NCR5380_queue_command
@ -500,10 +501,8 @@ static inline int generic_NCR5380_pread(struct NCR5380_hostdata *hostdata,
while (1) {
if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
return -1;
}
if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)
goto out_wait;
while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; /* FIXME - no timeout */
@ -542,13 +541,19 @@ static inline int generic_NCR5380_pread(struct NCR5380_hostdata *hostdata,
if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
printk("53C400r: no 53C80 gated irq after transfer");
out_wait:
hostdata->pdma_residual = len - start;
/* wait for 53C80 registers to be available */
while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG))
;
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
printk(KERN_ERR "53C400r: no end dma signal\n");
if (NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
BASR_END_DMA_TRANSFER, BASR_END_DMA_TRANSFER,
HZ / 64) < 0)
scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout (%d)\n",
__func__, hostdata->pdma_residual);
return 0;
}
@ -571,10 +576,8 @@ static inline int generic_NCR5380_pwrite(struct NCR5380_hostdata *hostdata,
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
NCR5380_write(hostdata->c400_blk_cnt, blocks);
while (1) {
if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
return -1;
}
if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)
goto out_wait;
if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
@ -612,18 +615,24 @@ static inline int generic_NCR5380_pwrite(struct NCR5380_hostdata *hostdata,
blocks--;
}
out_wait:
hostdata->pdma_residual = len - start;
/* wait for 53C80 registers to be available */
while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) {
udelay(4); /* DTC436 chip hangs without this */
/* FIXME - no timeout */
}
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
printk(KERN_ERR "53C400w: no end dma signal\n");
}
while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
; // TIMEOUT
if (NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
BASR_END_DMA_TRANSFER, BASR_END_DMA_TRANSFER,
HZ / 64) < 0)
scmd_printk(KERN_ERR, hostdata->connected, "%s: End of DMA timeout (%d)\n",
__func__, hostdata->pdma_residual);
return 0;
}
@ -642,6 +651,11 @@ static int generic_NCR5380_dma_xfer_len(struct NCR5380_hostdata *hostdata,
return min(transfersize, DMA_MAX_SIZE);
}
static int generic_NCR5380_dma_residual(struct NCR5380_hostdata *hostdata)
{
return hostdata->pdma_residual;
}
/*
* Include the NCR5380 core code that we build our driver around
*/