HID: sony: Send ds4 output reports on output end-point

Add a CRC value to each output report. This removes the need for the
'no output reports on interrupt end-point' quirk.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Roderick Colenbrander 2016-10-07 12:39:37 -07:00 committed by Jiri Kosina
parent 49b9ca6c6c
commit e7ef53adbf

View File

@ -1895,7 +1895,7 @@ static void dualshock4_send_output_report(struct sony_sc *sc)
} else {
memset(buf, 0, DS4_OUTPUT_REPORT_0x11_SIZE);
buf[0] = 0x11;
buf[1] = 0x80;
buf[1] = 0xC0; /* HID + CRC */
buf[3] = 0x0F;
offset = 6;
}
@ -1922,9 +1922,16 @@ static void dualshock4_send_output_report(struct sony_sc *sc)
if (sc->quirks & DUALSHOCK4_CONTROLLER_USB)
hid_hw_output_report(hdev, buf, DS4_OUTPUT_REPORT_0x05_SIZE);
else
hid_hw_raw_request(hdev, 0x11, buf, DS4_OUTPUT_REPORT_0x11_SIZE,
HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
else {
/* CRC generation */
u8 bthdr = 0xA2;
u32 crc;
crc = crc32_le(0xFFFFFFFF, &bthdr, 1);
crc = ~crc32_le(crc, buf, DS4_OUTPUT_REPORT_0x11_SIZE-4);
put_unaligned_le32(crc, &buf[74]);
hid_hw_output_report(hdev, buf, DS4_OUTPUT_REPORT_0x11_SIZE);
}
}
static void motion_send_output_report(struct sony_sc *sc)
@ -2378,11 +2385,6 @@ static int sony_input_configured(struct hid_device *hdev,
sony_init_output_report(sc, sixaxis_send_output_report);
} else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
/*
* The DualShock 4 wants output reports sent on the ctrl
* endpoint when connected via Bluetooth.
*/
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
ret = dualshock4_set_operational_bt(hdev);
if (ret < 0) {
hid_err(hdev, "failed to set the Dualshock 4 operational mode\n");