From 3d973b98d2744cfced1f06167c83e2cc2d7b63d5 Mon Sep 17 00:00:00 2001 From: Chanh Nguyen Date: Mon, 23 Sep 2024 09:38:00 +0000 Subject: [PATCH 01/36] dt-bindings: trivial-devices: add onnn,adt7462 The adt7462 supports monitoring and controlling up to four PWM Fan drive outputs and eight TACH inputs measures. The adt7462 supports reading a single on chip temperature sensor and three remote temperature sensors. There are up to 13 voltage monitoring inputs. Add device tree bindings for the adt7462 device. Signed-off-by: Chanh Nguyen Link: https://lore.kernel.org/r/20240923093800.892949-1-chanh@os.amperecomputing.com Signed-off-by: Rob Herring (Arm) --- Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 0108d7507215..15f89d7ecf73 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -311,6 +311,8 @@ properties: - nuvoton,w83773g # OKI ML86V7667 video decoder - oki,ml86v7667 + # ON Semiconductor ADT7462 Temperature, Voltage Monitor and Fan Controller + - onnn,adt7462 # 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch - plx,pex8648 # Pulsedlight LIDAR range-finding sensor From c5f02e0218e13371d71c9074516ce3c61406ccf2 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 25 Sep 2024 12:34:31 -0500 Subject: [PATCH 02/36] dt-bindings: interrupt-controller: ti,sci-inta: Add missing "#interrupt-cells" to example Enabling dtc interrupt_provider check reveals the example is missing the "#interrupt-cells" property as it is a dependency of "interrupt-controller". Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240925173432.1906168-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) --- .../devicetree/bindings/interrupt-controller/ti,sci-inta.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml index 6a49d74b992a..5449266f258a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -109,6 +109,7 @@ examples: compatible = "ti,sci-inta"; reg = <0x0 0x33d00000 0x0 0x100000>; interrupt-controller; + #interrupt-cells = <0>; msi-controller; interrupt-parent = <&main_navss_intr>; ti,sci = <&dmsc>; From b70ea8781988a0e81e183c27af9b391b7991ec3b Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 25 Sep 2024 12:34:38 -0500 Subject: [PATCH 03/36] dt-bindings: interrupt-controller: fsl,mu-msi: Drop "interrupt-controller" property The Freescale MU-MSI is an MSI provider, not an interrupt provider, so drop the "interrupt-controller" property. This fixes dtc "interrupt_provider" warning. Reviewed-by: Frank Li Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240925173438.1906339-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) --- .../devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml | 4 ---- 1 file changed, 4 deletions(-) diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml index 799ae5c3e32a..b5282c857f44 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml @@ -62,8 +62,6 @@ properties: - const: processor-a-side - const: processor-b-side - interrupt-controller: true - msi-controller: true "#msi-cells": @@ -73,7 +71,6 @@ required: - compatible - reg - interrupts - - interrupt-controller - msi-controller - "#msi-cells" @@ -88,7 +85,6 @@ examples: compatible = "fsl,imx6sx-mu-msi"; msi-controller; #msi-cells = <0>; - interrupt-controller; reg = <0x5d270000 0x10000>, /* A side */ <0x5d300000 0x10000>; /* B side */ reg-names = "processor-a-side", "processor-b-side"; From a6fa1f9e32f573faf53f9587ddbb70a0b9ab8c9f Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 25 Sep 2024 18:24:06 -0500 Subject: [PATCH 04/36] dt-bindings: Fix array property constraints Schemas for array properties should only have 1 level of array constraints (e.g. items, maxItems, minItems). Sometimes the old encoding of all properties into a matrix leaked into the schema, and didn't matter for validation. Now the inner constraints are just silently ignored as json-schema array keywords are ignored on scalar values. Generally, keep the inner constraints and drop the outer "items". With gicv3 "mbi-alias" property, it is more appropriately a uint32 or uint64 as it is an address and size depends on "#address-cells". Reviewed-by: Krzysztof Kozlowski Reviewed-by: Laurent Pinchart Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240925232409.2208515-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) --- Documentation/devicetree/bindings/cache/l2c2x0.yaml | 5 ++--- .../devicetree/bindings/dma/dma-common.yaml | 7 +++---- .../bindings/interrupt-controller/arm,gic-v3.yaml | 12 +++++------- .../devicetree/bindings/media/i2c/thine,thp7312.yaml | 3 +-- .../bindings/memory-controllers/exynos-srom.yaml | 5 ++--- .../devicetree/bindings/pci/brcm,stb-pcie.yaml | 5 ++--- .../devicetree/bindings/soc/qcom/qcom,smp2p.yaml | 3 +-- 7 files changed, 16 insertions(+), 24 deletions(-) diff --git a/Documentation/devicetree/bindings/cache/l2c2x0.yaml b/Documentation/devicetree/bindings/cache/l2c2x0.yaml index d7840a5c4037..10c1a900202f 100644 --- a/Documentation/devicetree/bindings/cache/l2c2x0.yaml +++ b/Documentation/devicetree/bindings/cache/l2c2x0.yaml @@ -100,9 +100,8 @@ properties: filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 2 - maxItems: 2 + minItems: 2 + maxItems: 2 arm,io-coherent: description: indicates that the system is operating in an hardware diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index ea700f8ee6c6..fde5160b5d29 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -32,10 +32,9 @@ properties: The first item in the array is for channels 0-31, the second is for channels 32-63, etc. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 1 - # Should be enough - maxItems: 255 + minItems: 1 + # Should be enough + maxItems: 255 dma-channels: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 5f051c666cbe..f3247a47f9ee 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -132,10 +132,9 @@ properties: Address property. Base address of an alias of the GICD region containing only the {SET,CLR}SPI registers to be used if isolation is required, and if supported by the HW. - $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 1 - maxItems: 2 + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - $ref: /schemas/types.yaml#/definitions/uint64 ppi-partitions: type: object @@ -223,9 +222,8 @@ patternProperties: (u32, u32) tuple describing the untranslated address and size of the pre-ITS window. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 2 - maxItems: 2 + minItems: 2 + maxItems: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml index 535acf2b88a9..bc339a7374b2 100644 --- a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml +++ b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml @@ -135,8 +135,7 @@ properties: data-lanes: $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes - items: - maxItems: 4 + maxItems: 4 description: This property is for lane reordering between the THP7312 and the imaging sensor that it is connected to. diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml index 10a2d97e5f8b..a5598ade399f 100644 --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml @@ -66,9 +66,8 @@ patternProperties: samsung,srom-timing: $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 6 - maxItems: 6 + minItems: 6 + maxItems: 6 description: | Array of 6 integers, specifying bank timings in the following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs. diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 0925c520195a..2ad1652c2584 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -92,9 +92,8 @@ properties: may have two component regions -- base and extended -- so this information cannot be deduced from the dma-ranges. $ref: /schemas/types.yaml#/definitions/uint64-array - items: - minItems: 1 - maxItems: 3 + minItems: 1 + maxItems: 3 resets: minItems: 1 diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml index 141d666dc3f7..1ba1d419e83b 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml @@ -55,8 +55,7 @@ properties: qcom,smem: $ref: /schemas/types.yaml#/definitions/uint32-array - items: - maxItems: 2 + maxItems: 2 description: Two identifiers of the inbound and outbound smem items used for this edge. From fbe4ba6c5c7c6bb61321ea65721e3c937e8e82cb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 3 Oct 2024 07:42:30 -0300 Subject: [PATCH 05/36] dt-bindings: fpga: altr,fpga-passive-serial: Convert to yaml Convert the Altera Passive Serial SPI FPGA Manager binding from text file to yaml format to allow devicetree validation. Signed-off-by: Fabio Estevam Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20241003104230.1628813-1-festevam@gmail.com Signed-off-by: Rob Herring (Arm) --- .../bindings/fpga/altera-passive-serial.txt | 29 -------- .../fpga/altr,fpga-passive-serial.yaml | 74 +++++++++++++++++++ 2 files changed, 74 insertions(+), 29 deletions(-) delete mode 100644 Documentation/devicetree/bindings/fpga/altera-passive-serial.txt create mode 100644 Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml diff --git a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt deleted file mode 100644 index 48478bc07e29..000000000000 --- a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt +++ /dev/null @@ -1,29 +0,0 @@ -Altera Passive Serial SPI FPGA Manager - -Altera FPGAs support a method of loading the bitstream over what is -referred to as "passive serial". -The passive serial link is not technically SPI, and might require extra -circuits in order to play nicely with other SPI slaves on the same bus. - -See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf - -Required properties: -- compatible: Must be one of the following: - "altr,fpga-passive-serial", - "altr,fpga-arria10-passive-serial" -- reg: SPI chip select of the FPGA -- nconfig-gpios: config pin (referred to as nCONFIG in the manual) -- nstat-gpios: status pin (referred to as nSTATUS in the manual) - -Optional properties: -- confd-gpios: confd pin (referred to as CONF_DONE in the manual) - -Example: - fpga: fpga@0 { - compatible = "altr,fpga-passive-serial"; - spi-max-frequency = <20000000>; - reg = <0>; - nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; - nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; - confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml new file mode 100644 index 000000000000..ffb7cc54556f --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/altr,fpga-passive-serial.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera Passive Serial SPI FPGA Manager + +maintainers: + - Fabio Estevam + +description: | + Altera FPGAs support a method of loading the bitstream over what is + referred to as "passive serial". + The passive serial link is not technically SPI, and might require extra + circuits in order to play nicely with other SPI slaves on the same bus. + + See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - altr,fpga-passive-serial + - altr,fpga-arria10-passive-serial + + spi-max-frequency: + maximum: 20000000 + + reg: + maxItems: 1 + + nconfig-gpios: + description: + Config pin (referred to as nCONFIG in the manual). + maxItems: 1 + + nstat-gpios: + description: + Status pin (referred to as nSTATUS in the manual). + maxItems: 1 + + confd-gpios: + description: + confd pin (referred to as CONF_DONE in the manual) + maxItems: 1 + +required: + - compatible + - reg + - nconfig-gpios + - nstat-gpios + +additionalProperties: false + +examples: + - | + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + fpga@0 { + compatible = "altr,fpga-passive-serial"; + reg = <0>; + nconfig-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + nstat-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + confd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + }; +... From 29bf3116cf2973bfaacce52e4e3a3b77719bae52 Mon Sep 17 00:00:00 2001 From: Ba Jing Date: Tue, 8 Oct 2024 14:06:45 +0800 Subject: [PATCH 06/36] of:of_numa: remove unused macro By reading the code, I found the marco DEFAULT_NODE is never referenced in the code. Just remove it. Signed-off-by: Ba Jing Link: https://lore.kernel.org/r/20241008060645.36071-1-bajing@cmss.chinamobile.com Signed-off-by: Rob Herring (Arm) --- drivers/of/of_numa.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/of/of_numa.c b/drivers/of/of_numa.c index 2ec20886d176..230d5f628c1b 100644 --- a/drivers/of/of_numa.c +++ b/drivers/of/of_numa.c @@ -14,9 +14,6 @@ #include -/* define default numa node to 0 */ -#define DEFAULT_NODE 0 - /* * Even though we connect cpus to numa domains later in SMP * init, we need to know the node ids now for all cpus. From 1d31c6fc86c09a2ed08e71a6bfae74bb1d7b116b Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 18 Sep 2024 14:51:30 -0500 Subject: [PATCH 07/36] dt-bindings: writing-schema: Add details on YAML text blocks The YAML format has a couple of different forms for multi-line text blocks which control allowed characters and handling of line-breaks. Getting this wrong is a common review issue. Either a literal block is used when there's no formatting needed or a folded/literal block is not used when there is formatting to maintain. Add some descriptions of the different forms to point folks to in reviews. Reviewed-by: Conor Dooley Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240918195130.2024205-2-robh@kernel.org Signed-off-by: Rob Herring (Arm) --- .../devicetree/bindings/writing-schema.rst | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst index 7e71cdd1d6de..eb8ced400c7e 100644 --- a/Documentation/devicetree/bindings/writing-schema.rst +++ b/Documentation/devicetree/bindings/writing-schema.rst @@ -43,6 +43,36 @@ description or device does, standards the device conforms to, and links to datasheets for more information. + The YAML format has several options for defining the formatting of the text + block. The options are controlled with indicator characters following the key + (e.g. "description: \|"). The minimum formatting needed for a block should be + used. The formatting controls can not only affect whether the YAML can be + parsed correctly, but are important when the text blocks are rendered to + another form. The options are as follows. + + The default without any indicators is flowed, plain scalar style where single + line breaks and leading whitespace are stripped. Paragraphs are delimited by + blank lines (i.e. double line break). This style cannot contain ": " in it as + it will be interpretted as a key. Any " #" sequence will be interpretted as + a comment. There's other restrictions on characters as well. Most + restrictions are on what the first character can be. + + The second style is folded which is indicated by ">" character. In addition + to maintaining line breaks on double line breaks, the folded style also + maintains leading whitespace beyond indentation of the first line. The line + breaks on indented lines are also maintained. + + The third style is literal which is indicated by "\|" character. The literal + style maintains all line breaks and whitespace (beyond indentation of the + first line). + + The above is not a complete description of YAML text blocks. More details on + multi-line YAML text blocks can be found online: + + https://yaml-multiline.info/ + + https://www.yaml.info/learn/quote.html + select Optional. A json-schema used to match nodes for applying the schema. By default, without 'select', nodes are matched against their possible From 6ba55951e70bf7a8d89c03aa5612d2e0c81ded6d Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Thu, 10 Oct 2024 11:27:15 -0500 Subject: [PATCH 08/36] logic_pio: Constify fwnode_handle The fwnode_handle passed into find_io_range_by_fwnode() and logic_pio_trans_hwaddr() are not modified, so make them const. Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241010-dt-const-v1-2-87a51f558425@kernel.org Signed-off-by: Rob Herring (Arm) --- include/linux/logic_pio.h | 6 +++--- lib/logic_pio.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/linux/logic_pio.h b/include/linux/logic_pio.h index babf4e3c28ba..8f1a9408302f 100644 --- a/include/linux/logic_pio.h +++ b/include/linux/logic_pio.h @@ -17,7 +17,7 @@ enum { struct logic_pio_hwaddr { struct list_head list; - struct fwnode_handle *fwnode; + const struct fwnode_handle *fwnode; resource_size_t hw_start; resource_size_t io_start; resource_size_t size; /* range size populated */ @@ -110,8 +110,8 @@ void logic_outsl(unsigned long addr, const void *buffer, unsigned int count); #endif /* CONFIG_INDIRECT_PIO */ #define MMIO_UPPER_LIMIT (IO_SPACE_LIMIT - PIO_INDIRECT_SIZE) -struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode); -unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode, +struct logic_pio_hwaddr *find_io_range_by_fwnode(const struct fwnode_handle *fwnode); +unsigned long logic_pio_trans_hwaddr(const struct fwnode_handle *fwnode, resource_size_t hw_addr, resource_size_t size); int logic_pio_register_range(struct logic_pio_hwaddr *newrange); void logic_pio_unregister_range(struct logic_pio_hwaddr *range); diff --git a/lib/logic_pio.c b/lib/logic_pio.c index 2ea564a40064..e29496a38d06 100644 --- a/lib/logic_pio.c +++ b/lib/logic_pio.c @@ -122,7 +122,7 @@ void logic_pio_unregister_range(struct logic_pio_hwaddr *range) * * Traverse the io_range_list to find the registered node for @fwnode. */ -struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode) +struct logic_pio_hwaddr *find_io_range_by_fwnode(const struct fwnode_handle *fwnode) { struct logic_pio_hwaddr *range, *found_range = NULL; @@ -186,7 +186,7 @@ resource_size_t logic_pio_to_hwaddr(unsigned long pio) * * Returns Logical PIO value if successful, ~0UL otherwise */ -unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode, +unsigned long logic_pio_trans_hwaddr(const struct fwnode_handle *fwnode, resource_size_t addr, resource_size_t size) { struct logic_pio_hwaddr *range; From f68303cf1cf2fb96e20df5499c194f1fe5bab9e2 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Thu, 10 Oct 2024 11:27:14 -0500 Subject: [PATCH 09/36] PCI: Constify pci_register_io_range() fwnode_handle pci_register_io_range() does not modify the passed in fwnode_handle, so make it const. Acked-by: Bjorn Helgaas Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241010-dt-const-v1-1-87a51f558425@kernel.org Signed-off-by: Rob Herring (Arm) --- drivers/pci/pci.c | 2 +- include/linux/pci.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 7d85c04fbba2..4b102bd1cfea 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4163,7 +4163,7 @@ EXPORT_SYMBOL(pci_request_regions_exclusive); * Record the PCI IO range (expressed as CPU physical address + size). * Return a negative value if an error has occurred, zero otherwise */ -int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr, +int pci_register_io_range(const struct fwnode_handle *fwnode, phys_addr_t addr, resource_size_t size) { int ret = 0; diff --git a/include/linux/pci.h b/include/linux/pci.h index 573b4c4c2be6..733ff6570e2d 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1556,7 +1556,7 @@ int __must_check pci_bus_alloc_resource(struct pci_bus *bus, void *alignf_data); -int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr, +int pci_register_io_range(const struct fwnode_handle *fwnode, phys_addr_t addr, resource_size_t size); unsigned long pci_address_to_pio(phys_addr_t addr); phys_addr_t pci_pio_to_address(unsigned long pio); @@ -2019,7 +2019,7 @@ static inline int pci_request_regions(struct pci_dev *dev, const char *res_name) { return -EIO; } static inline void pci_release_regions(struct pci_dev *dev) { } -static inline int pci_register_io_range(struct fwnode_handle *fwnode, +static inline int pci_register_io_range(const struct fwnode_handle *fwnode, phys_addr_t addr, resource_size_t size) { return -EINVAL; } From ec8c2329da1a8695b3fc80ba67cad9dc75d9a3ec Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Thu, 10 Oct 2024 11:27:16 -0500 Subject: [PATCH 10/36] of: Constify struct device_node function arguments Functions which don't change the refcount or otherwise modify struct device_node can make struct device_node const. Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241010-dt-const-v1-3-87a51f558425@kernel.org Signed-off-by: Rob Herring (Arm) --- drivers/of/address.c | 10 +++++----- drivers/of/base.c | 8 ++++---- drivers/of/cpu.c | 2 +- drivers/of/irq.c | 4 ++-- drivers/of/of_private.h | 2 +- drivers/of/overlay.c | 14 +++++++------- drivers/of/resolver.c | 4 ++-- include/linux/of.h | 14 +++++++------- include/linux/of_address.h | 4 ++-- include/linux/of_irq.h | 4 ++-- 10 files changed, 33 insertions(+), 33 deletions(-) diff --git a/drivers/of/address.c b/drivers/of/address.c index 286f0c161e33..aa1a4e381461 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -147,7 +147,7 @@ static unsigned int of_bus_pci_get_flags(const __be32 *addr) * PCI bus specific translator */ -static bool of_node_is_pcie(struct device_node *np) +static bool of_node_is_pcie(const struct device_node *np) { bool is_pcie = of_node_name_eq(np, "pcie"); @@ -230,8 +230,8 @@ static int __of_address_resource_bounds(struct resource *r, u64 start, u64 size) * To guard against that we try to register the IO range first. * If that fails we know that pci_address_to_pio() will do too. */ -int of_pci_range_to_resource(struct of_pci_range *range, - struct device_node *np, struct resource *res) +int of_pci_range_to_resource(const struct of_pci_range *range, + const struct device_node *np, struct resource *res) { u64 start; int err; @@ -399,7 +399,7 @@ static struct of_bus *of_match_bus(struct device_node *np) return NULL; } -static int of_empty_ranges_quirk(struct device_node *np) +static int of_empty_ranges_quirk(const struct device_node *np) { if (IS_ENABLED(CONFIG_PPC)) { /* To save cycles, we cache the result for global "Mac" setting */ @@ -1030,7 +1030,7 @@ EXPORT_SYMBOL_GPL(of_dma_is_coherent); * This is currently only enabled on builds that support Apple ARM devices, as * an optimization. */ -static bool of_mmio_is_nonposted(struct device_node *np) +static bool of_mmio_is_nonposted(const struct device_node *np) { if (!IS_ENABLED(CONFIG_ARCH_APPLE)) return false; diff --git a/drivers/of/base.c b/drivers/of/base.c index 20603d3c9931..d1aebb979522 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -771,7 +771,7 @@ struct device_node *of_get_child_by_name(const struct device_node *node, } EXPORT_SYMBOL(of_get_child_by_name); -struct device_node *__of_find_node_by_path(struct device_node *parent, +struct device_node *__of_find_node_by_path(const struct device_node *parent, const char *path) { struct device_node *child; @@ -1840,7 +1840,7 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)) * * Return: The alias id if found. */ -int of_alias_get_id(struct device_node *np, const char *stem) +int of_alias_get_id(const struct device_node *np, const char *stem) { struct alias_prop *app; int id = -ENODEV; @@ -1898,7 +1898,7 @@ EXPORT_SYMBOL_GPL(of_alias_get_highest_id); * * Return: TRUE if console successfully setup. Otherwise return FALSE. */ -bool of_console_check(struct device_node *dn, char *name, int index) +bool of_console_check(const struct device_node *dn, char *name, int index) { if (!dn || dn != of_stdout || console_set_on_cmdline) return false; @@ -1986,7 +1986,7 @@ int of_find_last_cache_level(unsigned int cpu) * * Return: 0 on success or a standard error code on failure. */ -int of_map_id(struct device_node *np, u32 id, +int of_map_id(const struct device_node *np, u32 id, const char *map_name, const char *map_mask_name, struct device_node **target, u32 *id_out) { diff --git a/drivers/of/cpu.c b/drivers/of/cpu.c index d17b2f851082..5214dc3d05ae 100644 --- a/drivers/of/cpu.c +++ b/drivers/of/cpu.c @@ -188,7 +188,7 @@ EXPORT_SYMBOL(of_cpu_node_to_id); * Return: An idle state node if found at @index. The refcount is incremented * for it, so call of_node_put() on it when done. Returns NULL if not found. */ -struct device_node *of_get_cpu_state_node(struct device_node *cpu_node, +struct device_node *of_get_cpu_state_node(const struct device_node *cpu_node, int index) { struct of_phandle_args args; diff --git a/drivers/of/irq.c b/drivers/of/irq.c index a494f56a0d0e..67fc0ceaa5f5 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -720,7 +720,7 @@ struct irq_domain *of_msi_map_get_device_domain(struct device *dev, u32 id, * Returns: the MSI domain for this device (or NULL on failure). */ struct irq_domain *of_msi_get_domain(struct device *dev, - struct device_node *np, + const struct device_node *np, enum irq_domain_bus_token token) { struct of_phandle_iterator it; @@ -742,7 +742,7 @@ EXPORT_SYMBOL_GPL(of_msi_get_domain); * @dev: device structure to associate with an MSI irq domain * @np: device node for that device */ -void of_msi_configure(struct device *dev, struct device_node *np) +void of_msi_configure(struct device *dev, const struct device_node *np) { dev_set_msi_domain(dev, of_msi_get_domain(dev, np, DOMAIN_BUS_PLATFORM_MSI)); diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index 04aa2a91f851..d957cc6ce437 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -127,7 +127,7 @@ void __of_prop_free(struct property *prop); struct device_node *__of_node_dup(const struct device_node *np, const char *full_name); -struct device_node *__of_find_node_by_path(struct device_node *parent, +struct device_node *__of_find_node_by_path(const struct device_node *parent, const char *path); struct device_node *__of_find_node_by_full_path(struct device_node *node, const char *path); diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index cbdecccca097..19aaa96ee817 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -398,7 +398,7 @@ static int add_changeset_property(struct overlay_changeset *ovcs, * invalid @overlay. */ static int add_changeset_node(struct overlay_changeset *ovcs, - struct target *target, struct device_node *node) + struct target *target, const struct device_node *node) { const char *node_kbasename; const __be32 *phandle; @@ -675,8 +675,8 @@ static int build_changeset(struct overlay_changeset *ovcs) * 1) "target" property containing the phandle of the target * 2) "target-path" property containing the path of the target */ -static struct device_node *find_target(struct device_node *info_node, - struct device_node *target_base) +static struct device_node *find_target(const struct device_node *info_node, + const struct device_node *target_base) { struct device_node *node; char *target_path; @@ -735,7 +735,7 @@ static struct device_node *find_target(struct device_node *info_node, * init_overlay_changeset() must call free_overlay_changeset(). */ static int init_overlay_changeset(struct overlay_changeset *ovcs, - struct device_node *target_base) + const struct device_node *target_base) { struct device_node *node, *overlay_node; struct fragment *fragment; @@ -910,7 +910,7 @@ static void free_overlay_changeset(struct overlay_changeset *ovcs) */ static int of_overlay_apply(struct overlay_changeset *ovcs, - struct device_node *base) + const struct device_node *base) { int ret = 0, ret_revert, ret_tmp; @@ -978,7 +978,7 @@ out: */ int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size, - int *ret_ovcs_id, struct device_node *base) + int *ret_ovcs_id, const struct device_node *base) { void *new_fdt; void *new_fdt_align; @@ -1074,7 +1074,7 @@ EXPORT_SYMBOL_GPL(of_overlay_fdt_apply); * * Returns 1 if @np is @tree or is contained in @tree, else 0 */ -static int find_node(struct device_node *tree, struct device_node *np) +static int find_node(const struct device_node *tree, struct device_node *np) { if (tree == np) return 1; diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c index 5cf96776dd7d..ee7769525bb2 100644 --- a/drivers/of/resolver.c +++ b/drivers/of/resolver.c @@ -147,8 +147,8 @@ static int node_name_cmp(const struct device_node *dn1, * of offsets of the phandle reference(s) within the respective property * value(s). The values at these offsets will be fixed up. */ -static int adjust_local_phandle_references(struct device_node *local_fixups, - struct device_node *overlay, int phandle_delta) +static int adjust_local_phandle_references(const struct device_node *local_fixups, + const struct device_node *overlay, int phandle_delta) { struct device_node *overlay_child; struct property *prop_fix, *prop; diff --git a/include/linux/of.h b/include/linux/of.h index 85b60ac9eec5..7875b308f13c 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -357,7 +357,7 @@ extern struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); extern struct device_node *of_cpu_device_node_get(int cpu); extern int of_cpu_node_to_id(struct device_node *np); extern struct device_node *of_get_next_cpu_node(struct device_node *prev); -extern struct device_node *of_get_cpu_state_node(struct device_node *cpu_node, +extern struct device_node *of_get_cpu_state_node(const struct device_node *cpu_node, int index); extern u64 of_get_cpu_hwid(struct device_node *cpun, unsigned int thread); @@ -395,7 +395,7 @@ extern int of_phandle_iterator_args(struct of_phandle_iterator *it, int size); extern void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)); -extern int of_alias_get_id(struct device_node *np, const char *stem); +extern int of_alias_get_id(const struct device_node *np, const char *stem); extern int of_alias_get_highest_id(const char *stem); bool of_machine_compatible_match(const char *const *compats); @@ -446,9 +446,9 @@ const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur, */ const char *of_prop_next_string(struct property *prop, const char *cur); -bool of_console_check(struct device_node *dn, char *name, int index); +bool of_console_check(const struct device_node *dn, char *name, int index); -int of_map_id(struct device_node *np, u32 id, +int of_map_id(const struct device_node *np, u32 id, const char *map_name, const char *map_mask_name, struct device_node **target, u32 *id_out); @@ -871,7 +871,7 @@ static inline void of_property_clear_flag(struct property *p, unsigned long flag { } -static inline int of_map_id(struct device_node *np, u32 id, +static inline int of_map_id(const struct device_node *np, u32 id, const char *map_name, const char *map_mask_name, struct device_node **target, u32 *id_out) { @@ -1734,7 +1734,7 @@ struct of_overlay_notify_data { #ifdef CONFIG_OF_OVERLAY int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size, - int *ovcs_id, struct device_node *target_base); + int *ovcs_id, const struct device_node *target_base); int of_overlay_remove(int *ovcs_id); int of_overlay_remove_all(void); @@ -1744,7 +1744,7 @@ int of_overlay_notifier_unregister(struct notifier_block *nb); #else static inline int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size, - int *ovcs_id, struct device_node *target_base) + int *ovcs_id, const struct device_node *target_base) { return -ENOTSUPP; } diff --git a/include/linux/of_address.h b/include/linux/of_address.h index 26a19daf0d09..bd46dbcc6e88 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -83,8 +83,8 @@ extern struct of_pci_range *of_pci_range_parser_one( struct of_pci_range *range); extern int of_pci_address_to_resource(struct device_node *dev, int bar, struct resource *r); -extern int of_pci_range_to_resource(struct of_pci_range *range, - struct device_node *np, +extern int of_pci_range_to_resource(const struct of_pci_range *range, + const struct device_node *np, struct resource *res); extern int of_range_to_resource(struct device_node *np, int index, struct resource *res); diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h index d6d3eae2f145..6337ad4e5fe8 100644 --- a/include/linux/of_irq.h +++ b/include/linux/of_irq.h @@ -48,12 +48,12 @@ extern int of_irq_to_resource_table(struct device_node *dev, struct resource *res, int nr_irqs); extern struct device_node *of_irq_find_parent(struct device_node *child); extern struct irq_domain *of_msi_get_domain(struct device *dev, - struct device_node *np, + const struct device_node *np, enum irq_domain_bus_token token); extern struct irq_domain *of_msi_map_get_device_domain(struct device *dev, u32 id, u32 bus_token); -extern void of_msi_configure(struct device *dev, struct device_node *np); +extern void of_msi_configure(struct device *dev, const struct device_node *np); u32 of_msi_map_id(struct device *dev, struct device_node *msi_np, u32 id_in); #else static inline void of_irq_init(const struct of_device_id *matches) From 9c63fea9acd077701fd67bbc21b1e77d6b98b7e0 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Thu, 10 Oct 2024 11:27:17 -0500 Subject: [PATCH 11/36] of: Constify struct property pointers Most accesses to struct property do not modify it, so constify struct property pointers where ever possible in the DT core code. Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241010-dt-const-v1-4-87a51f558425@kernel.org Signed-off-by: Rob Herring (Arm) --- drivers/of/base.c | 12 ++++++------ drivers/of/kobj.c | 6 +++--- drivers/of/of_private.h | 10 +++++----- drivers/of/overlay.c | 5 +++-- drivers/of/property.c | 10 +++++----- drivers/of/resolver.c | 8 ++++---- include/linux/of.h | 14 +++++++------- 7 files changed, 33 insertions(+), 32 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index d1aebb979522..d94efee4a7fc 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -270,7 +270,7 @@ EXPORT_SYMBOL(of_find_all_nodes); const void *__of_get_property(const struct device_node *np, const char *name, int *lenp) { - struct property *pp = __of_find_property(np, name, lenp); + const struct property *pp = __of_find_property(np, name, lenp); return pp ? pp->value : NULL; } @@ -282,7 +282,7 @@ const void *__of_get_property(const struct device_node *np, const void *of_get_property(const struct device_node *np, const char *name, int *lenp) { - struct property *pp = of_find_property(np, name, lenp); + const struct property *pp = of_find_property(np, name, lenp); return pp ? pp->value : NULL; } @@ -321,7 +321,7 @@ EXPORT_SYMBOL(of_get_property); static int __of_device_is_compatible(const struct device_node *device, const char *compat, const char *type, const char *name) { - struct property *prop; + const struct property *prop; const char *cp; int index = 0, score = 0; @@ -828,7 +828,7 @@ struct device_node *__of_find_node_by_full_path(struct device_node *node, struct device_node *of_find_node_opts_by_path(const char *path, const char **opts) { struct device_node *np = NULL; - struct property *pp; + const struct property *pp; unsigned long flags; const char *separator = strchr(path, ':'); @@ -974,7 +974,7 @@ struct device_node *of_find_node_with_property(struct device_node *from, const char *prop_name) { struct device_node *np; - struct property *pp; + const struct property *pp; unsigned long flags; raw_spin_lock_irqsave(&devtree_lock, flags); @@ -1769,7 +1769,7 @@ static void of_alias_add(struct alias_prop *ap, struct device_node *np, */ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)) { - struct property *pp; + const struct property *pp; of_aliases = of_find_node_by_path("/aliases"); of_chosen = of_find_node_by_path("/chosen"); diff --git a/drivers/of/kobj.c b/drivers/of/kobj.c index 3dbce1e6f184..aeb1709d4e85 100644 --- a/drivers/of/kobj.c +++ b/drivers/of/kobj.c @@ -84,7 +84,7 @@ int __of_add_property_sysfs(struct device_node *np, struct property *pp) return rc; } -void __of_sysfs_remove_bin_file(struct device_node *np, struct property *prop) +void __of_sysfs_remove_bin_file(struct device_node *np, const struct property *prop) { if (!IS_ENABLED(CONFIG_SYSFS)) return; @@ -93,7 +93,7 @@ void __of_sysfs_remove_bin_file(struct device_node *np, struct property *prop) kfree(prop->attr.attr.name); } -void __of_remove_property_sysfs(struct device_node *np, struct property *prop) +void __of_remove_property_sysfs(struct device_node *np, const struct property *prop) { /* at early boot, bail here and defer setup to of_init() */ if (of_kset && of_node_is_attached(np)) @@ -101,7 +101,7 @@ void __of_remove_property_sysfs(struct device_node *np, struct property *prop) } void __of_update_property_sysfs(struct device_node *np, struct property *newprop, - struct property *oldprop) + const struct property *oldprop) { /* At early boot, bail out and defer setup to of_init() */ if (!of_kset) diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index d957cc6ce437..53a4a5be9997 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -69,9 +69,9 @@ static inline void of_platform_register_reconfig_notifier(void) { } #if defined(CONFIG_OF_KOBJ) int of_node_is_attached(const struct device_node *node); int __of_add_property_sysfs(struct device_node *np, struct property *pp); -void __of_remove_property_sysfs(struct device_node *np, struct property *prop); +void __of_remove_property_sysfs(struct device_node *np, const struct property *prop); void __of_update_property_sysfs(struct device_node *np, struct property *newprop, - struct property *oldprop); + const struct property *oldprop); int __of_attach_node_sysfs(struct device_node *np); void __of_detach_node_sysfs(struct device_node *np); #else @@ -79,9 +79,9 @@ static inline int __of_add_property_sysfs(struct device_node *np, struct propert { return 0; } -static inline void __of_remove_property_sysfs(struct device_node *np, struct property *prop) {} +static inline void __of_remove_property_sysfs(struct device_node *np, const struct property *prop) {} static inline void __of_update_property_sysfs(struct device_node *np, - struct property *newprop, struct property *oldprop) {} + struct property *newprop, const struct property *oldprop) {} static inline int __of_attach_node_sysfs(struct device_node *np) { return 0; @@ -142,7 +142,7 @@ extern int __of_update_property(struct device_node *np, extern void __of_detach_node(struct device_node *np); extern void __of_sysfs_remove_bin_file(struct device_node *np, - struct property *prop); + const struct property *prop); /* illegal phandle value (set when unresolved) */ #define OF_PHANDLE_ILLEGAL 0xdeadbeef diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index 19aaa96ee817..434f6dd6a86c 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -296,10 +296,11 @@ err_free_target_path: * invalid @overlay. */ static int add_changeset_property(struct overlay_changeset *ovcs, - struct target *target, struct property *overlay_prop, + struct target *target, const struct property *overlay_prop, bool is_symbols_prop) { - struct property *new_prop = NULL, *prop; + struct property *new_prop = NULL; + const struct property *prop; int ret = 0; if (target->in_livetree) diff --git a/drivers/of/property.c b/drivers/of/property.c index 11b922fde7af..33dd72cad4ab 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -68,7 +68,7 @@ EXPORT_SYMBOL(of_graph_is_present); int of_property_count_elems_of_size(const struct device_node *np, const char *propname, int elem_size) { - struct property *prop = of_find_property(np, propname, NULL); + const struct property *prop = of_find_property(np, propname, NULL); if (!prop) return -EINVAL; @@ -104,7 +104,7 @@ EXPORT_SYMBOL_GPL(of_property_count_elems_of_size); static void *of_find_property_value_of_size(const struct device_node *np, const char *propname, u32 min, u32 max, size_t *len) { - struct property *prop = of_find_property(np, propname, NULL); + const struct property *prop = of_find_property(np, propname, NULL); if (!prop) return ERR_PTR(-EINVAL); @@ -530,7 +530,7 @@ int of_property_read_string_helper(const struct device_node *np, } EXPORT_SYMBOL_GPL(of_property_read_string_helper); -const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur, +const __be32 *of_prop_next_u32(const struct property *prop, const __be32 *cur, u32 *pu) { const void *curv = cur; @@ -553,7 +553,7 @@ out_val: } EXPORT_SYMBOL_GPL(of_prop_next_u32); -const char *of_prop_next_string(struct property *prop, const char *cur) +const char *of_prop_next_string(const struct property *prop, const char *cur) { const void *curv = cur; @@ -1466,7 +1466,7 @@ static int of_fwnode_irq_get(const struct fwnode_handle *fwnode, static int of_fwnode_add_links(struct fwnode_handle *fwnode) { - struct property *p; + const struct property *p; struct device_node *con_np = to_of_node(fwnode); if (IS_ENABLED(CONFIG_X86)) diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c index ee7769525bb2..779db058c42f 100644 --- a/drivers/of/resolver.c +++ b/drivers/of/resolver.c @@ -42,7 +42,7 @@ static void adjust_overlay_phandles(struct device_node *overlay, int phandle_delta) { struct device_node *child; - struct property *prop; + const struct property *prop; phandle phandle; /* adjust node's phandle in node */ @@ -71,10 +71,10 @@ static void adjust_overlay_phandles(struct device_node *overlay, } static int update_usages_of_a_phandle_reference(struct device_node *overlay, - struct property *prop_fixup, phandle phandle) + const struct property *prop_fixup, phandle phandle) { struct device_node *refnode; - struct property *prop; + const struct property *prop; char *value __free(kfree) = kmemdup(prop_fixup->value, prop_fixup->length, GFP_KERNEL); char *cur, *end, *node_path, *prop_name, *s; int offset, len; @@ -151,7 +151,7 @@ static int adjust_local_phandle_references(const struct device_node *local_fixup const struct device_node *overlay, int phandle_delta) { struct device_node *overlay_child; - struct property *prop_fix, *prop; + const struct property *prop_fix, *prop; int err, i, count; unsigned int off; diff --git a/include/linux/of.h b/include/linux/of.h index 7875b308f13c..086a60f3b8a6 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -435,7 +435,7 @@ extern int of_detach_node(struct device_node *); * of_property_for_each_u32(np, "propname", u) * printk("U32 value: %x\n", u); */ -const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur, +const __be32 *of_prop_next_u32(const struct property *prop, const __be32 *cur, u32 *pu); /* * struct property *prop; @@ -444,7 +444,7 @@ const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur, * of_property_for_each_string(np, "propname", prop, s) * printk("String value: %s\n", s); */ -const char *of_prop_next_string(struct property *prop, const char *cur); +const char *of_prop_next_string(const struct property *prop, const char *cur); bool of_console_check(const struct device_node *dn, char *name, int index); @@ -826,13 +826,13 @@ static inline bool of_console_check(const struct device_node *dn, const char *na return false; } -static inline const __be32 *of_prop_next_u32(struct property *prop, +static inline const __be32 *of_prop_next_u32(const struct property *prop, const __be32 *cur, u32 *pu) { return NULL; } -static inline const char *of_prop_next_string(struct property *prop, +static inline const char *of_prop_next_string(const struct property *prop, const char *cur) { return NULL; @@ -899,7 +899,7 @@ static inline const void *of_device_get_match_data(const struct device *dev) #define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) #endif -static inline int of_prop_val_eq(struct property *p1, struct property *p2) +static inline int of_prop_val_eq(const struct property *p1, const struct property *p2) { return p1->length == p2->length && !memcmp(p1->value, p2->value, (size_t)p1->length); @@ -1252,7 +1252,7 @@ static inline int of_property_read_string_index(const struct device_node *np, static inline bool of_property_read_bool(const struct device_node *np, const char *propname) { - struct property *prop = of_find_property(np, propname, NULL); + const struct property *prop = of_find_property(np, propname, NULL); return prop ? true : false; } @@ -1430,7 +1430,7 @@ static inline int of_property_read_s32(const struct device_node *np, err = of_phandle_iterator_next(it)) #define of_property_for_each_u32(np, propname, u) \ - for (struct {struct property *prop; const __be32 *item; } _it = \ + for (struct {const struct property *prop; const __be32 *item; } _it = \ {of_find_property(np, propname, NULL), \ of_prop_next_u32(_it.prop, NULL, &u)}; \ _it.item; \ From 7118782dfb4ac101b2a9cf1fa7bb95e43d398a9e Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Thu, 10 Oct 2024 11:27:18 -0500 Subject: [PATCH 12/36] of: Constify of_changeset_entry function arguments __of_changeset_entry_invert() and __of_changeset_entry_revert() don't modify struct of_changeset_entry arguments, so they can be const. Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241010-dt-const-v1-5-87a51f558425@kernel.org Signed-off-by: Rob Herring (Arm) --- drivers/of/dynamic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c index 110104a936d9..d45a8df61380 100644 --- a/drivers/of/dynamic.c +++ b/drivers/of/dynamic.c @@ -536,7 +536,7 @@ static void __of_changeset_entry_destroy(struct of_changeset_entry *ce) kfree(ce); } -static void __of_changeset_entry_invert(struct of_changeset_entry *ce, +static void __of_changeset_entry_invert(const struct of_changeset_entry *ce, struct of_changeset_entry *rce) { memcpy(rce, ce, sizeof(*rce)); @@ -636,7 +636,7 @@ static int __of_changeset_entry_apply(struct of_changeset_entry *ce) return 0; } -static inline int __of_changeset_entry_revert(struct of_changeset_entry *ce) +static inline int __of_changeset_entry_revert(const struct of_changeset_entry *ce) { struct of_changeset_entry ce_inverted; From 3539089bcc86806d5705f094f46b3dbd61606961 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Thu, 10 Oct 2024 11:27:19 -0500 Subject: [PATCH 13/36] of: Constify safe_name() kobject arg The kobject is not modified by safe_name() function, so make it const. Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241010-dt-const-v1-6-87a51f558425@kernel.org Signed-off-by: Rob Herring (Arm) --- drivers/of/kobj.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/kobj.c b/drivers/of/kobj.c index aeb1709d4e85..cab9b169dc67 100644 --- a/drivers/of/kobj.c +++ b/drivers/of/kobj.c @@ -37,7 +37,7 @@ static ssize_t of_node_property_read(struct file *filp, struct kobject *kobj, } /* always return newly allocated name, caller must free after use */ -static const char *safe_name(struct kobject *kobj, const char *orig_name) +static const char *safe_name(const struct kobject *kobj, const char *orig_name) { const char *name = orig_name; struct kernfs_node *kn; From d79616b04f0e08178ceb716a5d2ef60ab723d532 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Thu, 10 Oct 2024 11:27:20 -0500 Subject: [PATCH 14/36] of/address: Constify of_busses[] array and pointers The of_busses array is fixed, so it and all struct of_bus pointers can be const. Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241010-dt-const-v1-7-87a51f558425@kernel.org Signed-off-by: Rob Herring (Arm) --- drivers/of/address.c | 12 ++++++------ include/linux/of_address.h | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/of/address.c b/drivers/of/address.c index aa1a4e381461..824bb449e007 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -340,7 +340,7 @@ static int of_bus_default_flags_match(struct device_node *np) * Array of bus specific translators */ -static struct of_bus of_busses[] = { +static const struct of_bus of_busses[] = { #ifdef CONFIG_PCI /* PCI */ { @@ -388,7 +388,7 @@ static struct of_bus of_busses[] = { }, }; -static struct of_bus *of_match_bus(struct device_node *np) +static const struct of_bus *of_match_bus(struct device_node *np) { int i; @@ -419,8 +419,8 @@ static int of_empty_ranges_quirk(const struct device_node *np) return false; } -static int of_translate_one(struct device_node *parent, struct of_bus *bus, - struct of_bus *pbus, __be32 *addr, +static int of_translate_one(const struct device_node *parent, const struct of_bus *bus, + const struct of_bus *pbus, __be32 *addr, int na, int ns, int pna, const char *rprop) { const __be32 *ranges; @@ -505,7 +505,7 @@ static u64 __of_translate_address(struct device_node *node, { struct device_node *dev __free(device_node) = of_node_get(node); struct device_node *parent __free(device_node) = get_parent(dev); - struct of_bus *bus, *pbus; + const struct of_bus *bus, *pbus; __be32 addr[OF_MAX_ADDR_CELLS]; int na, ns, pna, pns; @@ -690,7 +690,7 @@ const __be32 *__of_get_address(struct device_node *dev, int index, int bar_no, const __be32 *prop; unsigned int psize; struct device_node *parent __free(device_node) = of_get_parent(dev); - struct of_bus *bus; + const struct of_bus *bus; int onesize, i, na, ns; if (parent == NULL) diff --git a/include/linux/of_address.h b/include/linux/of_address.h index bd46dbcc6e88..9e034363788a 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -10,7 +10,7 @@ struct of_bus; struct of_pci_range_parser { struct device_node *node; - struct of_bus *bus; + const struct of_bus *bus; const __be32 *range; const __be32 *end; int na; From 8a6e02d0c00e7b62e6acb74146878bb91e9e7e31 Mon Sep 17 00:00:00 2001 From: Oreoluwa Babatunde Date: Tue, 8 Oct 2024 15:06:23 -0700 Subject: [PATCH 15/36] of: reserved_mem: Restructure how the reserved memory regions are processed Reserved memory regions defined in the devicetree can be broken up into two groups: i) Statically-placed reserved memory regions i.e. regions defined with a static start address and size using the "reg" property. ii) Dynamically-placed reserved memory regions. i.e. regions defined by specifying an address range where they can be placed in memory using the "alloc_ranges" and "size" properties. These regions are processed and set aside at boot time. This is done in two stages as seen below: Stage 1: At this stage, fdt_scan_reserved_mem() scans through the child nodes of the reserved_memory node using the flattened devicetree and does the following: 1) If the node represents a statically-placed reserved memory region, i.e. if it is defined using the "reg" property: - Call memblock_reserve() or memblock_mark_nomap() as needed. - Add the information for that region into the reserved_mem array using fdt_reserved_mem_save_node(). i.e. fdt_reserved_mem_save_node(node, name, base, size). 2) If the node represents a dynamically-placed reserved memory region, i.e. if it is defined using "alloc-ranges" and "size" properties: - Add the information for that region to the reserved_mem array with the starting address and size set to 0. i.e. fdt_reserved_mem_save_node(node, name, 0, 0). Note: This region is saved to the array with a starting address of 0 because a starting address is not yet allocated for it. Stage 2: After iterating through all the reserved memory nodes and storing their relevant information in the reserved_mem array,fdt_init_reserved_mem() is called and does the following: 1) For statically-placed reserved memory regions: - Call the region specific init function using __reserved_mem_init_node(). 2) For dynamically-placed reserved memory regions: - Call __reserved_mem_alloc_size() which is used to allocate memory for each of these regions, and mark them as nomap if they have the nomap property specified in the DT. - Call the region specific init function. The current size of the resvered_mem array is 64 as is defined by MAX_RESERVED_REGIONS. This means that there is a limitation of 64 for how many reserved memory regions can be specified on a system. As systems continue to grow more and more complex, the number of reserved memory regions needed are also growing and are starting to hit this 64 count limit, hence the need to make the reserved_mem array dynamically sized (i.e. dynamically allocating memory for the reserved_mem array using membock_alloc_*). On architectures such as arm64, memory allocated using memblock is writable only after the page tables have been setup. This means that if the reserved_mem array is going to be dynamically allocated, it needs to happen after the page tables have been setup, not before. Since the reserved memory regions are currently being processed and added to the array before the page tables are setup, there is a need to change the order in which some of the processing is done to allow for the reserved_mem array to be dynamically sized. It is possible to process the statically-placed reserved memory regions without needing to store them in the reserved_mem array until after the page tables have been setup because all the information stored in the array is readily available in the devicetree and can be referenced at any time. Dynamically-placed reserved memory regions on the other hand get assigned a start address only at runtime, and hence need a place to be stored once they are allocated since there is no other referrence to the start address for these regions. Hence this patch changes the processing order of the reserved memory regions in the following ways: Step 1: fdt_scan_reserved_mem() scans through the child nodes of the reserved_memory node using the flattened devicetree and does the following: 1) If the node represents a statically-placed reserved memory region, i.e. if it is defined using the "reg" property: - Call memblock_reserve() or memblock_mark_nomap() as needed. 2) If the node represents a dynamically-placed reserved memory region, i.e. if it is defined using "alloc-ranges" and "size" properties: - Call __reserved_mem_alloc_size() which will: i) Allocate memory for the reserved region and call memblock_mark_nomap() as needed. ii) Call the region specific initialization function using fdt_init_reserved_mem_node(). iii) Save the region information in the reserved_mem array using fdt_reserved_mem_save_node(). Step 2: 1) This stage of the reserved memory processing is now only used to add the statically-placed reserved memory regions into the reserved_mem array using fdt_scan_reserved_mem_reg_nodes(), as well as call their region specific initialization functions. 2) This step has also been moved to be after the page tables are setup. Moving this will allow us to replace the reserved_mem array with a dynamically sized array before storing the rest of these regions. Signed-off-by: Oreoluwa Babatunde Link: https://lore.kernel.org/r/20241008220624.551309-2-quic_obabatun@quicinc.com Signed-off-by: Rob Herring (Arm) --- drivers/of/fdt.c | 5 +- drivers/of/of_private.h | 3 +- drivers/of/of_reserved_mem.c | 166 ++++++++++++++++++++++++----------- 3 files changed, 121 insertions(+), 53 deletions(-) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 4d528c10df3a..d0dbc8183ac4 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -511,8 +511,6 @@ void __init early_init_fdt_scan_reserved_mem(void) break; memblock_reserve(base, size); } - - fdt_init_reserved_mem(); } /** @@ -1212,6 +1210,9 @@ void __init unflatten_device_tree(void) { void *fdt = initial_boot_params; + /* Save the statically-placed regions in the reserved_mem array */ + fdt_scan_reserved_mem_reg_nodes(); + /* Don't use the bootloader provided DTB if ACPI is enabled */ if (!acpi_disabled) fdt = NULL; diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index 53a4a5be9997..2bd30901d2e4 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -9,6 +9,7 @@ */ #define FDT_ALIGN_SIZE 8 +#define MAX_RESERVED_REGIONS 64 /** * struct alias_prop - Alias property in 'aliases' node @@ -180,7 +181,7 @@ static inline struct device_node *__of_get_dma_parent(const struct device_node * #endif int fdt_scan_reserved_mem(void); -void fdt_init_reserved_mem(void); +void __init fdt_scan_reserved_mem_reg_nodes(void); bool of_fdt_device_is_available(const void *blob, unsigned long node); diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index 46e1c3fbc769..2011174211f9 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -27,7 +27,6 @@ #include "of_private.h" -#define MAX_RESERVED_REGIONS 64 static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS]; static int reserved_mem_count; @@ -56,6 +55,7 @@ static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size, return err; } +static void __init fdt_init_reserved_mem_node(struct reserved_mem *rmem); /* * fdt_reserved_mem_save_node() - save fdt node for second pass initialization */ @@ -74,6 +74,9 @@ static void __init fdt_reserved_mem_save_node(unsigned long node, const char *un rmem->base = base; rmem->size = size; + /* Call the region specific initialization function */ + fdt_init_reserved_mem_node(rmem); + reserved_mem_count++; return; } @@ -106,7 +109,6 @@ static int __init __reserved_mem_reserve_reg(unsigned long node, phys_addr_t base, size; int len; const __be32 *prop; - int first = 1; bool nomap; prop = of_get_flat_dt_prop(node, "reg", &len); @@ -134,10 +136,6 @@ static int __init __reserved_mem_reserve_reg(unsigned long node, uname, &base, (unsigned long)(size / SZ_1M)); len -= t_len; - if (first) { - fdt_reserved_mem_save_node(node, uname, base, size); - first = 0; - } } return 0; } @@ -165,12 +163,77 @@ static int __init __reserved_mem_check_root(unsigned long node) return 0; } +static void __init __rmem_check_for_overlap(void); + +/** + * fdt_scan_reserved_mem_reg_nodes() - Store info for the "reg" defined + * reserved memory regions. + * + * This function is used to scan through the DT and store the + * information for the reserved memory regions that are defined using + * the "reg" property. The region node number, name, base address, and + * size are all stored in the reserved_mem array by calling the + * fdt_reserved_mem_save_node() function. + */ +void __init fdt_scan_reserved_mem_reg_nodes(void) +{ + int t_len = (dt_root_addr_cells + dt_root_size_cells) * sizeof(__be32); + const void *fdt = initial_boot_params; + phys_addr_t base, size; + const __be32 *prop; + int node, child; + int len; + + if (!fdt) + return; + + node = fdt_path_offset(fdt, "/reserved-memory"); + if (node < 0) { + pr_info("Reserved memory: No reserved-memory node in the DT\n"); + return; + } + + if (__reserved_mem_check_root(node)) { + pr_err("Reserved memory: unsupported node format, ignoring\n"); + return; + } + + fdt_for_each_subnode(child, fdt, node) { + const char *uname; + + prop = of_get_flat_dt_prop(child, "reg", &len); + if (!prop) + continue; + if (!of_fdt_device_is_available(fdt, child)) + continue; + + uname = fdt_get_name(fdt, child, NULL); + if (len && len % t_len != 0) { + pr_err("Reserved memory: invalid reg property in '%s', skipping node.\n", + uname); + continue; + } + base = dt_mem_next_cell(dt_root_addr_cells, &prop); + size = dt_mem_next_cell(dt_root_size_cells, &prop); + + if (size) + fdt_reserved_mem_save_node(child, uname, base, size); + } + + /* check for overlapping reserved regions */ + __rmem_check_for_overlap(); +} + +static int __init __reserved_mem_alloc_size(unsigned long node, const char *uname); + /* * fdt_scan_reserved_mem() - scan a single FDT node for reserved memory */ int __init fdt_scan_reserved_mem(void) { int node, child; + int dynamic_nodes_cnt = 0; + int dynamic_nodes[MAX_RESERVED_REGIONS]; const void *fdt = initial_boot_params; node = fdt_path_offset(fdt, "/reserved-memory"); @@ -192,8 +255,24 @@ int __init fdt_scan_reserved_mem(void) uname = fdt_get_name(fdt, child, NULL); err = __reserved_mem_reserve_reg(child, uname); - if (err == -ENOENT && of_get_flat_dt_prop(child, "size", NULL)) - fdt_reserved_mem_save_node(child, uname, 0, 0); + /* + * Save the nodes for the dynamically-placed regions + * into an array which will be used for allocation right + * after all the statically-placed regions are reserved + * or marked as no-map. This is done to avoid dynamically + * allocating from one of the statically-placed regions. + */ + if (err == -ENOENT && of_get_flat_dt_prop(child, "size", NULL)) { + dynamic_nodes[dynamic_nodes_cnt] = child; + dynamic_nodes_cnt++; + } + } + for (int i = 0; i < dynamic_nodes_cnt; i++) { + const char *uname; + + child = dynamic_nodes[i]; + uname = fdt_get_name(fdt, child, NULL); + __reserved_mem_alloc_size(child, uname); } return 0; } @@ -253,8 +332,7 @@ static int __init __reserved_mem_alloc_in_range(phys_addr_t size, * __reserved_mem_alloc_size() - allocate reserved memory described by * 'size', 'alignment' and 'alloc-ranges' properties. */ -static int __init __reserved_mem_alloc_size(unsigned long node, - const char *uname, phys_addr_t *res_base, phys_addr_t *res_size) +static int __init __reserved_mem_alloc_size(unsigned long node, const char *uname) { int t_len = (dt_root_addr_cells + dt_root_size_cells) * sizeof(__be32); phys_addr_t start = 0, end = 0; @@ -334,9 +412,8 @@ static int __init __reserved_mem_alloc_size(unsigned long node, return -ENOMEM; } - *res_base = base; - *res_size = size; - + /* Save region in the reserved_mem array */ + fdt_reserved_mem_save_node(node, uname, base, size); return 0; } @@ -425,48 +502,37 @@ static void __init __rmem_check_for_overlap(void) } /** - * fdt_init_reserved_mem() - allocate and init all saved reserved memory regions + * fdt_init_reserved_mem_node() - Initialize a reserved memory region + * @rmem: reserved_mem struct of the memory region to be initialized. + * + * This function is used to call the region specific initialization + * function for a reserved memory region. */ -void __init fdt_init_reserved_mem(void) +static void __init fdt_init_reserved_mem_node(struct reserved_mem *rmem) { - int i; + unsigned long node = rmem->fdt_node; + int err = 0; + bool nomap; - /* check for overlapping reserved regions */ - __rmem_check_for_overlap(); + nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL; - for (i = 0; i < reserved_mem_count; i++) { - struct reserved_mem *rmem = &reserved_mem[i]; - unsigned long node = rmem->fdt_node; - int err = 0; - bool nomap; + err = __reserved_mem_init_node(rmem); + if (err != 0 && err != -ENOENT) { + pr_info("node %s compatible matching fail\n", rmem->name); + if (nomap) + memblock_clear_nomap(rmem->base, rmem->size); + else + memblock_phys_free(rmem->base, rmem->size); + } else { + phys_addr_t end = rmem->base + rmem->size - 1; + bool reusable = + (of_get_flat_dt_prop(node, "reusable", NULL)) != NULL; - nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL; - - if (rmem->size == 0) - err = __reserved_mem_alloc_size(node, rmem->name, - &rmem->base, &rmem->size); - if (err == 0) { - err = __reserved_mem_init_node(rmem); - if (err != 0 && err != -ENOENT) { - pr_info("node %s compatible matching fail\n", - rmem->name); - if (nomap) - memblock_clear_nomap(rmem->base, rmem->size); - else - memblock_phys_free(rmem->base, - rmem->size); - } else { - phys_addr_t end = rmem->base + rmem->size - 1; - bool reusable = - (of_get_flat_dt_prop(node, "reusable", NULL)) != NULL; - - pr_info("%pa..%pa (%lu KiB) %s %s %s\n", - &rmem->base, &end, (unsigned long)(rmem->size / SZ_1K), - nomap ? "nomap" : "map", - reusable ? "reusable" : "non-reusable", - rmem->name ? rmem->name : "unknown"); - } - } + pr_info("%pa..%pa (%lu KiB) %s %s %s\n", + &rmem->base, &end, (unsigned long)(rmem->size / SZ_1K), + nomap ? "nomap" : "map", + reusable ? "reusable" : "non-reusable", + rmem->name ? rmem->name : "unknown"); } } From 00c9a452a235c61f099504783badd9a7675ff5a5 Mon Sep 17 00:00:00 2001 From: Oreoluwa Babatunde Date: Tue, 8 Oct 2024 15:06:24 -0700 Subject: [PATCH 16/36] of: reserved_mem: Add code to dynamically allocate reserved_mem array The reserved_mem array is statically allocated with a size of MAX_RESERVED_REGIONS(64). Therefore, if the number of reserved_mem regions exceeds this size, there will not be enough space to store all the data. Hence, extend the use of the static array by introducing a dynamically allocated array based on the number of reserved memory regions specified in the DT. On architectures such as arm64, memblock allocated memory is not writable until after the page tables have been setup. Hence, the dynamic allocation of the reserved_mem array will need to be done only after the page tables have been setup. As a result, a temporary static array is still needed in the initial stages to store the information of the dynamically-placed reserved memory regions because the start address is selected only at run-time and is not stored anywhere else. It is not possible to wait until the reserved_mem array is allocated because this is done after the page tables are setup and the reserved memory regions need to be initialized before then. After the reserved_mem array is allocated, all entries from the static array is copied over to the new array, and the rest of the information for the statically-placed reserved memory regions are read in from the DT and stored in the new array as well. Once the init process is completed, the temporary static array is released back to the system because it is no longer needed. This is achieved by marking it as __initdata. Signed-off-by: Oreoluwa Babatunde Link: https://lore.kernel.org/r/20241008220624.551309-3-quic_obabatun@quicinc.com Signed-off-by: Rob Herring (Arm) --- drivers/of/of_reserved_mem.c | 63 +++++++++++++++++++++++++++++++++--- 1 file changed, 59 insertions(+), 4 deletions(-) diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index 2011174211f9..45517b9e57b1 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -27,7 +27,9 @@ #include "of_private.h" -static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS]; +static struct reserved_mem reserved_mem_array[MAX_RESERVED_REGIONS] __initdata; +static struct reserved_mem *reserved_mem __refdata = reserved_mem_array; +static int total_reserved_mem_cnt = MAX_RESERVED_REGIONS; static int reserved_mem_count; static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size, @@ -55,6 +57,50 @@ static int __init early_init_dt_alloc_reserved_memory_arch(phys_addr_t size, return err; } +/* + * alloc_reserved_mem_array() - allocate memory for the reserved_mem + * array using memblock + * + * This function is used to allocate memory for the reserved_mem + * array according to the total number of reserved memory regions + * defined in the DT. + * After the new array is allocated, the information stored in + * the initial static array is copied over to this new array and + * the new array is used from this point on. + */ +static void __init alloc_reserved_mem_array(void) +{ + struct reserved_mem *new_array; + size_t alloc_size, copy_size, memset_size; + + alloc_size = array_size(total_reserved_mem_cnt, sizeof(*new_array)); + if (alloc_size == SIZE_MAX) { + pr_err("Failed to allocate memory for reserved_mem array with err: %d", -EOVERFLOW); + return; + } + + new_array = memblock_alloc(alloc_size, SMP_CACHE_BYTES); + if (!new_array) { + pr_err("Failed to allocate memory for reserved_mem array with err: %d", -ENOMEM); + return; + } + + copy_size = array_size(reserved_mem_count, sizeof(*new_array)); + if (copy_size == SIZE_MAX) { + memblock_free(new_array, alloc_size); + total_reserved_mem_cnt = MAX_RESERVED_REGIONS; + pr_err("Failed to allocate memory for reserved_mem array with err: %d", -EOVERFLOW); + return; + } + + memset_size = alloc_size - copy_size; + + memcpy(new_array, reserved_mem, copy_size); + memset(new_array + reserved_mem_count, 0, memset_size); + + reserved_mem = new_array; +} + static void __init fdt_init_reserved_mem_node(struct reserved_mem *rmem); /* * fdt_reserved_mem_save_node() - save fdt node for second pass initialization @@ -64,7 +110,7 @@ static void __init fdt_reserved_mem_save_node(unsigned long node, const char *un { struct reserved_mem *rmem = &reserved_mem[reserved_mem_count]; - if (reserved_mem_count == ARRAY_SIZE(reserved_mem)) { + if (reserved_mem_count == total_reserved_mem_cnt) { pr_err("not enough space for all defined regions.\n"); return; } @@ -193,6 +239,9 @@ void __init fdt_scan_reserved_mem_reg_nodes(void) return; } + /* Attempt dynamic allocation of a new reserved_mem array */ + alloc_reserved_mem_array(); + if (__reserved_mem_check_root(node)) { pr_err("Reserved memory: unsupported node format, ignoring\n"); return; @@ -232,7 +281,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node, const char *unam int __init fdt_scan_reserved_mem(void) { int node, child; - int dynamic_nodes_cnt = 0; + int dynamic_nodes_cnt = 0, count = 0; int dynamic_nodes[MAX_RESERVED_REGIONS]; const void *fdt = initial_boot_params; @@ -255,6 +304,8 @@ int __init fdt_scan_reserved_mem(void) uname = fdt_get_name(fdt, child, NULL); err = __reserved_mem_reserve_reg(child, uname); + if (!err) + count++; /* * Save the nodes for the dynamically-placed regions * into an array which will be used for allocation right @@ -269,11 +320,15 @@ int __init fdt_scan_reserved_mem(void) } for (int i = 0; i < dynamic_nodes_cnt; i++) { const char *uname; + int err; child = dynamic_nodes[i]; uname = fdt_get_name(fdt, child, NULL); - __reserved_mem_alloc_size(child, uname); + err = __reserved_mem_alloc_size(child, uname); + if (!err) + count++; } + total_reserved_mem_cnt = count; return 0; } From 2e030910fa90a1e46333c092c8bd00746a911be5 Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Tue, 15 Oct 2024 23:15:04 +0300 Subject: [PATCH 17/36] of: module: remove strlen() call in of_modalias() In of_modalias(), there's no dire need to call strlen() (and then add 1 to its result to account for the 'C' char preceding the compat string). Replace that strlen() with snprintf() (currently below it) -- this way, we always try to print the compat string but then only advance the str and len parameters iff the compat string fit into the remaining buffer space... Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/471418be-5d2f-4d14-bd9e-9e8f0526241f@omp.ru Signed-off-by: Rob Herring (Arm) --- drivers/of/module.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/of/module.c b/drivers/of/module.c index 780fd82a7ecc..1e735fc130ad 100644 --- a/drivers/of/module.c +++ b/drivers/of/module.c @@ -35,12 +35,10 @@ ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len) str += csize; of_property_for_each_string(np, "compatible", p, compat) { - csize = strlen(compat) + 1; + csize = snprintf(str, len, "C%s", compat); tsize += csize; if (csize >= len) continue; - - csize = snprintf(str, len, "C%s", compat); for (c = str; c; ) { c = strchr(c, ' '); if (c) From 02ac5f9d6caec96071103f7c62b5117526e47b64 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 24 Oct 2024 02:20:02 +0000 Subject: [PATCH 18/36] of: property: add of_graph_get_next_port() We have endpoint base functions - of_graph_get_next_endpoint() - of_graph_get_endpoint_count() - for_each_endpoint_of_node() Here, for_each_endpoint_of_node() loop finds each endpoints ports { port@0 { (1) endpoint {...}; }; port@1 { (2) endpoint {...}; }; ... }; In above case, it finds endpoint as (1) -> (2) -> ... Basically, user/driver knows which port is used for what, but not in all cases. For example on flexible/generic driver case, how many ports are used is not fixed. For example Sound Generic Card driver which is very flexible/generic and used from many venders can't know how many ports are used, and used for what, because it depends on each vender SoC and/or its used board. And more, the port can have multi endpoints. For example Generic Sound Card case, it supports many type of connection between CPU / Codec, and some of them uses multi endpoint in one port. see below. ports { (A) port@0 { (1) endpoint@0 {...}; (2) endpoint@1 {...}; }; (B) port@1 { (3) endpoint {...}; }; ... }; Generic Sound Card want to handle each connection via "port" base instead of "endpoint" base. But, it is very difficult to handle each "port" via existing for_each_endpoint_of_node(). Because getting each "port" via of_get_parent() from each "endpoint" doesn't work. For example in above case, both (1) (2) endpoint has same "port" (= A). Add "port" base functions. Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87ldyeb5t9.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Rob Herring (Arm) --- drivers/of/property.c | 54 ++++++++++++++++++++++++++++++++++++++++ include/linux/of_graph.h | 28 +++++++++++++++++++++ 2 files changed, 82 insertions(+) diff --git a/drivers/of/property.c b/drivers/of/property.c index 33dd72cad4ab..6dd5461ea359 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -630,6 +630,43 @@ struct device_node *of_graph_get_port_by_id(struct device_node *parent, u32 id) } EXPORT_SYMBOL(of_graph_get_port_by_id); +/** + * of_graph_get_next_port() - get next port node. + * @parent: pointer to the parent device node, or parent ports node + * @prev: previous port node, or NULL to get first + * + * Parent device node can be used as @parent whether device node has ports node + * or not. It will work same as ports@0 node. + * + * Return: A 'port' node pointer with refcount incremented. Refcount + * of the passed @prev node is decremented. + */ +struct device_node *of_graph_get_next_port(const struct device_node *parent, + struct device_node *prev) +{ + if (!parent) + return NULL; + + if (!prev) { + struct device_node *node __free(device_node) = + of_get_child_by_name(parent, "ports"); + + if (node) + parent = node; + + return of_get_child_by_name(parent, "port"); + } + + do { + prev = of_get_next_child(parent, prev); + if (!prev) + break; + } while (!of_node_name_eq(prev, "port")); + + return prev; +} +EXPORT_SYMBOL(of_graph_get_next_port); + /** * of_graph_get_next_endpoint() - get next endpoint node * @parent: pointer to the parent device node @@ -823,6 +860,23 @@ unsigned int of_graph_get_endpoint_count(const struct device_node *np) } EXPORT_SYMBOL(of_graph_get_endpoint_count); +/** + * of_graph_get_port_count() - get the number of port in a device or ports node + * @np: pointer to the device or ports node + * + * Return: count of port of this device or ports node + */ +unsigned int of_graph_get_port_count(struct device_node *np) +{ + unsigned int num = 0; + + for_each_of_graph_port(np, port) + num++; + + return num; +} +EXPORT_SYMBOL(of_graph_get_port_count); + /** * of_graph_get_remote_node() - get remote parent device_node for given port/endpoint * @node: pointer to parent device_node containing graph port/endpoint diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h index a4bea62bfa29..44518f3583a4 100644 --- a/include/linux/of_graph.h +++ b/include/linux/of_graph.h @@ -11,6 +11,7 @@ #ifndef __LINUX_OF_GRAPH_H #define __LINUX_OF_GRAPH_H +#include #include #include @@ -37,14 +38,29 @@ struct of_endpoint { for (child = of_graph_get_next_endpoint(parent, NULL); child != NULL; \ child = of_graph_get_next_endpoint(parent, child)) +/** + * for_each_of_graph_port - iterate over every port in a device or ports node + * @parent: parent device or ports node containing port + * @child: loop variable pointing to the current port node + * + * When breaking out of the loop, and continue to use the @child, you need to + * use return_ptr(@child) or no_free_ptr(@child) not to call __free() for it. + */ +#define for_each_of_graph_port(parent, child) \ + for (struct device_node *child __free(device_node) = of_graph_get_next_port(parent, NULL);\ + child != NULL; child = of_graph_get_next_port(parent, child)) + #ifdef CONFIG_OF bool of_graph_is_present(const struct device_node *node); int of_graph_parse_endpoint(const struct device_node *node, struct of_endpoint *endpoint); unsigned int of_graph_get_endpoint_count(const struct device_node *np); +unsigned int of_graph_get_port_count(struct device_node *np); struct device_node *of_graph_get_port_by_id(struct device_node *node, u32 id); struct device_node *of_graph_get_next_endpoint(const struct device_node *parent, struct device_node *previous); +struct device_node *of_graph_get_next_port(const struct device_node *parent, + struct device_node *port); struct device_node *of_graph_get_endpoint_by_regs( const struct device_node *parent, int port_reg, int reg); struct device_node *of_graph_get_remote_endpoint( @@ -73,6 +89,11 @@ static inline unsigned int of_graph_get_endpoint_count(const struct device_node return 0; } +static inline unsigned int of_graph_get_port_count(struct device_node *np) +{ + return 0; +} + static inline struct device_node *of_graph_get_port_by_id( struct device_node *node, u32 id) { @@ -86,6 +107,13 @@ static inline struct device_node *of_graph_get_next_endpoint( return NULL; } +static inline struct device_node *of_graph_get_next_port( + const struct device_node *parent, + struct device_node *previous) +{ + return NULL; +} + static inline struct device_node *of_graph_get_endpoint_by_regs( const struct device_node *parent, int port_reg, int reg) { From 58fe47d6ac7413172e1fa88324fb1b4c0eb2c0a2 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 24 Oct 2024 02:20:06 +0000 Subject: [PATCH 19/36] of: property: add of_graph_get_next_port_endpoint() We already have of_graph_get_next_endpoint(), but it is not intuitive to use in some case. (X) node { (Y) ports { (P0) port@0 { endpoint { remote-endpoint = ...; };}; (P10) port@1 { endpoint { remote-endpoint = ...; }; (P11) endpoint { remote-endpoint = ...; };}; (P2) port@2 { endpoint { remote-endpoint = ...; };}; }; }; For example, if I want to handle port@1's 2 endpoints (= P10, P11), I want to use like below P10 = of_graph_get_next_endpoint(port1, NULL); P11 = of_graph_get_next_endpoint(port1, P10); But 1st one will be error, because of_graph_get_next_endpoint() requested 1st parameter is "node" (X) or "ports" (Y), not but "port". Below works well, but it will get P0 P0 = of_graph_get_next_endpoint(node, NULL); P0 = of_graph_get_next_endpoint(ports, NULL); In other words, we can't handle P10/P11 directly via of_graph_get_next_endpoint(). There is another non intuitive behavior on of_graph_get_next_endpoint(). In case of if I could get P10 pointer for some way, and if I want to handle port@1 things by loop, I would like use it like below /* * "ep" is now P10, and handle port1 things here, * but we don't know how many endpoints port1 have. * * Because "ep" is non NULL now, we can use port1 * as of_graph_get_next_endpoint(port1, xxx) */ do { /* do something for port1 specific things here */ } while (ep = of_graph_get_next_endpoint(port1, ep)) But it also not worked as I expected. I expect it will be P10 -> P11 -> NULL, but it will be P10 -> P11 -> P2, because of_graph_get_next_endpoint() will fetch "endpoint" beyond the "port". It is not useful for generic driver. To handle endpoint more intuitive, create of_graph_get_next_port_endpoint() of_graph_get_next_port_endpoint(port1, NULL); // P10 of_graph_get_next_port_endpoint(port1, P10); // P11 of_graph_get_next_port_endpoint(port1, P11); // NULL Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87jzdyb5t5.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Rob Herring (Arm) --- drivers/of/property.c | 27 +++++++++++++++++++++++++++ include/linux/of_graph.h | 21 +++++++++++++++++++++ 2 files changed, 48 insertions(+) diff --git a/drivers/of/property.c b/drivers/of/property.c index 6dd5461ea359..ce0e08176fca 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -667,6 +667,33 @@ struct device_node *of_graph_get_next_port(const struct device_node *parent, } EXPORT_SYMBOL(of_graph_get_next_port); +/** + * of_graph_get_next_port_endpoint() - get next endpoint node in port. + * If it reached to end of the port, it will return NULL. + * @port: pointer to the target port node + * @prev: previous endpoint node, or NULL to get first + * + * Return: An 'endpoint' node pointer with refcount incremented. Refcount + * of the passed @prev node is decremented. + */ +struct device_node *of_graph_get_next_port_endpoint(const struct device_node *port, + struct device_node *prev) +{ + while (1) { + prev = of_get_next_child(port, prev); + if (!prev) + break; + if (WARN(!of_node_name_eq(prev, "endpoint"), + "non endpoint node is used (%pOF)", prev)) + continue; + + break; + } + + return prev; +} +EXPORT_SYMBOL(of_graph_get_next_port_endpoint); + /** * of_graph_get_next_endpoint() - get next endpoint node * @parent: pointer to the parent device node diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h index 44518f3583a4..a692d9d979a6 100644 --- a/include/linux/of_graph.h +++ b/include/linux/of_graph.h @@ -50,6 +50,18 @@ struct of_endpoint { for (struct device_node *child __free(device_node) = of_graph_get_next_port(parent, NULL);\ child != NULL; child = of_graph_get_next_port(parent, child)) +/** + * for_each_of_graph_port_endpoint - iterate over every endpoint in a port node + * @parent: parent port node + * @child: loop variable pointing to the current endpoint node + * + * When breaking out of the loop, and continue to use the @child, you need to + * use return_ptr(@child) or no_free_ptr(@child) not to call __free() for it. + */ +#define for_each_of_graph_port_endpoint(parent, child) \ + for (struct device_node *child __free(device_node) = of_graph_get_next_port_endpoint(parent, NULL);\ + child != NULL; child = of_graph_get_next_port_endpoint(parent, child)) + #ifdef CONFIG_OF bool of_graph_is_present(const struct device_node *node); int of_graph_parse_endpoint(const struct device_node *node, @@ -61,6 +73,8 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent, struct device_node *previous); struct device_node *of_graph_get_next_port(const struct device_node *parent, struct device_node *port); +struct device_node *of_graph_get_next_port_endpoint(const struct device_node *port, + struct device_node *prev); struct device_node *of_graph_get_endpoint_by_regs( const struct device_node *parent, int port_reg, int reg); struct device_node *of_graph_get_remote_endpoint( @@ -114,6 +128,13 @@ static inline struct device_node *of_graph_get_next_port( return NULL; } +static inline struct device_node *of_graph_get_next_port_endpoint( + const struct device_node *parent, + struct device_node *previous) +{ + return NULL; +} + static inline struct device_node *of_graph_get_endpoint_by_regs( const struct device_node *parent, int port_reg, int reg) { From 3d4b0149b4d4e558b196fb874713d6bcec10b3f5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 24 Oct 2024 02:20:11 +0000 Subject: [PATCH 20/36] of: property: use new of_graph functions Current of_graph_get_next_endpoint() can be replaced by using new of_graph_get_next_port(). Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87iktib5t0.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Rob Herring (Arm) --- drivers/of/property.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/of/property.c b/drivers/of/property.c index ce0e08176fca..519bf9229e61 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -717,13 +717,7 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent, * parent port node. */ if (!prev) { - struct device_node *node __free(device_node) = - of_get_child_by_name(parent, "ports"); - - if (node) - parent = node; - - port = of_get_child_by_name(parent, "port"); + port = of_graph_get_next_port(parent, NULL); if (!port) { pr_debug("graph: no port node found in %pOF\n", parent); return NULL; @@ -741,7 +735,7 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent, * getting the next child. If the previous endpoint is NULL this * will return the first child. */ - endpoint = of_get_next_child(port, prev); + endpoint = of_graph_get_next_port_endpoint(port, prev); if (endpoint) { of_node_put(port); return endpoint; @@ -750,11 +744,9 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent, /* No more endpoints under this port, try the next one. */ prev = NULL; - do { - port = of_get_next_child(parent, port); - if (!port) - return NULL; - } while (!of_node_name_eq(port, "port")); + port = of_graph_get_next_port(parent, port); + if (!port) + return NULL; } } EXPORT_SYMBOL(of_graph_get_next_endpoint); From b345b5b20708b05ade61362f740cf5e61d50fd82 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 24 Oct 2024 02:20:15 +0000 Subject: [PATCH 21/36] ASoC: test-component: use new of_graph functions Current test-component.c is using for_each_endpoint_of_node() for parsing "port", because there was no "port" base loop before. It has been assuming 1 port has 1 endpoint here. But now we can use "port" base loop (= for_each_of_graph_port()). Let's replace for_each function from "endpoint" base to "port" base. Signed-off-by: Kuninori Morimoto Acked-by: Mark Brown Link: https://lore.kernel.org/r/87h692b5sw.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Rob Herring (Arm) --- sound/soc/generic/test-component.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/generic/test-component.c b/sound/soc/generic/test-component.c index 407288055741..85ce3ebeec05 100644 --- a/sound/soc/generic/test-component.c +++ b/sound/soc/generic/test-component.c @@ -521,7 +521,6 @@ static int test_driver_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = dev->of_node; - struct device_node *ep; const struct test_adata *adata = of_device_get_match_data(&pdev->dev); struct snd_soc_component_driver *cdriv; struct snd_soc_dai_driver *ddriv; @@ -591,7 +590,7 @@ static int test_driver_probe(struct platform_device *pdev) } i = 0; - for_each_endpoint_of_node(node, ep) { + for_each_of_graph_port(node, port) { snprintf(dname[i].name, TEST_NAME_LEN, "%s.%d", node->name, i); ddriv[i].name = dname[i].name; From 75e3d9622f3b49904eff3950074ac3c6c6214151 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 24 Oct 2024 02:20:20 +0000 Subject: [PATCH 22/36] ASoC: audio-graph-card: use new of_graph functions Now we can use new port related functions for port parsing. Use it. Signed-off-by: Kuninori Morimoto Acked-by: Mark Brown Link: https://lore.kernel.org/r/87fromb5sr.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Rob Herring (Arm) --- sound/soc/generic/audio-graph-card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index 4b384475b972..7655425a3deb 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -372,7 +372,7 @@ static int __graph_for_each_link(struct simple_util_priv *priv, cpu_port = it.node; /* loop for all CPU endpoint */ - for_each_child_of_node_scoped(cpu_port, cpu_ep) { + for_each_of_graph_port_endpoint(cpu_port, cpu_ep) { /* get codec */ codec_ep = of_graph_get_remote_endpoint(cpu_ep); codec_port = ep_to_port(codec_ep); From 0d4f080e9fe497d053f72b12f053a7f6c4998c29 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 24 Oct 2024 02:20:25 +0000 Subject: [PATCH 23/36] ASoC: audio-graph-card2: use new of_graph functions Now we can use new port related functions for port parsing. Use it. Signed-off-by: Kuninori Morimoto Acked-by: Mark Brown Link: https://lore.kernel.org/r/87ed46b5sm.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Rob Herring (Arm) --- sound/soc/generic/audio-graph-card2.c | 112 ++++++++++++-------------- 1 file changed, 52 insertions(+), 60 deletions(-) diff --git a/sound/soc/generic/audio-graph-card2.c b/sound/soc/generic/audio-graph-card2.c index 4ad3d1b0714f..3605a6b2c782 100644 --- a/sound/soc/generic/audio-graph-card2.c +++ b/sound/soc/generic/audio-graph-card2.c @@ -234,8 +234,6 @@ enum graph_type { #define GRAPH_NODENAME_DPCM "dpcm" #define GRAPH_NODENAME_C2C "codec2codec" -#define port_to_endpoint(port) of_get_child_by_name(port, "endpoint") - #define ep_to_port(ep) of_get_parent(ep) static struct device_node *port_to_ports(struct device_node *port) { @@ -351,14 +349,9 @@ static struct device_node *graph_get_next_multi_ep(struct device_node **port) * port@1 { rep1 }; * }; */ - do { - *port = of_get_next_child(ports, *port); - if (!*port) - break; - } while (!of_node_name_eq(*port, "port")); - + *port = of_graph_get_next_port(ports, *port); if (*port) { - ep = port_to_endpoint(*port); + ep = of_graph_get_next_port_endpoint(*port, NULL); rep = of_graph_get_remote_endpoint(ep); } @@ -530,67 +523,66 @@ static int graph_parse_node_multi_nm(struct snd_soc_dai_link *dai_link, * }; * }; */ - struct device_node *mcpu_ep = port_to_endpoint(mcpu_port); - struct device_node *mcpu_ep_n = mcpu_ep; - struct device_node *mcpu_port_top = of_get_next_child(port_to_ports(mcpu_port), NULL); - struct device_node *mcpu_ep_top = port_to_endpoint(mcpu_port_top); + struct device_node *mcpu_ep = of_graph_get_next_port_endpoint(mcpu_port, NULL); + struct device_node *mcpu_ports = port_to_ports(mcpu_port); + struct device_node *mcpu_port_top = of_graph_get_next_port(mcpu_ports, NULL); + struct device_node *mcpu_ep_top = of_graph_get_next_port_endpoint(mcpu_port_top, NULL); struct device_node *mcodec_ep_top = of_graph_get_remote_endpoint(mcpu_ep_top); struct device_node *mcodec_port_top = ep_to_port(mcodec_ep_top); struct device_node *mcodec_ports = port_to_ports(mcodec_port_top); int nm_max = max(dai_link->num_cpus, dai_link->num_codecs); - int ret = -EINVAL; + int ret = 0; - if (cpu_idx > dai_link->num_cpus) + if (cpu_idx > dai_link->num_cpus) { + ret = -EINVAL; goto mcpu_err; + } - while (1) { + for_each_of_graph_port_endpoint(mcpu_port, mcpu_ep_n) { struct device_node *mcodec_ep_n; - struct device_node *mcodec_port_i; struct device_node *mcodec_port; int codec_idx; + /* ignore 1st ep which is for element */ + if (mcpu_ep_n == mcpu_ep) + continue; + if (*nm_idx > nm_max) break; - mcpu_ep_n = of_get_next_child(mcpu_port, mcpu_ep_n); - if (!mcpu_ep_n) { - ret = 0; - break; - } - mcodec_ep_n = of_graph_get_remote_endpoint(mcpu_ep_n); mcodec_port = ep_to_port(mcodec_ep_n); - if (mcodec_ports != port_to_ports(mcodec_port)) + if (mcodec_ports != port_to_ports(mcodec_port)) { + ret = -EINVAL; goto mcpu_err; - - codec_idx = 0; - mcodec_port_i = of_get_next_child(mcodec_ports, NULL); - while (1) { - if (codec_idx > dai_link->num_codecs) - goto mcodec_err; - - mcodec_port_i = of_get_next_child(mcodec_ports, mcodec_port_i); - - if (!mcodec_port_i) - goto mcodec_err; - - if (mcodec_port_i == mcodec_port) - break; - - codec_idx++; } - dai_link->ch_maps[*nm_idx].cpu = cpu_idx; - dai_link->ch_maps[*nm_idx].codec = codec_idx; + codec_idx = 0; + ret = -EINVAL; + for_each_of_graph_port(mcodec_ports, mcodec_port_i) { - (*nm_idx)++; + /* ignore 1st port which is for pair connection */ + if (mcodec_port_top == mcodec_port_i) + continue; - of_node_put(mcodec_port_i); -mcodec_err: + if (codec_idx > dai_link->num_codecs) + break; + + if (mcodec_port_i == mcodec_port) { + dai_link->ch_maps[*nm_idx].cpu = cpu_idx; + dai_link->ch_maps[*nm_idx].codec = codec_idx; + + (*nm_idx)++; + ret = 0; + break; + } + codec_idx++; + } of_node_put(mcodec_port); - of_node_put(mcpu_ep_n); of_node_put(mcodec_ep_n); + if (ret < 0) + break; } mcpu_err: of_node_put(mcpu_ep); @@ -674,7 +666,7 @@ static int graph_parse_node_single(struct simple_util_priv *priv, struct device_node *port, struct link_info *li, int is_cpu) { - struct device_node *ep = port_to_endpoint(port); + struct device_node *ep = of_graph_get_next_port_endpoint(port, NULL); int ret = __graph_parse_node(priv, gtype, ep, li, is_cpu, 0); of_node_put(ep); @@ -769,7 +761,7 @@ static void graph_link_init(struct simple_util_priv *priv, of_node_put(port_cpu); port_cpu = ep_to_port(ep_cpu); } else { - ep_cpu = port_to_endpoint(port_cpu); + ep_cpu = of_graph_get_next_port_endpoint(port_cpu, NULL); } ports_cpu = port_to_ports(port_cpu); @@ -779,7 +771,7 @@ static void graph_link_init(struct simple_util_priv *priv, of_node_put(port_cpu); port_codec = ep_to_port(ep_codec); } else { - ep_codec = port_to_endpoint(port_codec); + ep_codec = of_graph_get_next_port_endpoint(port_codec, NULL); } ports_codec = port_to_ports(port_codec); @@ -850,7 +842,7 @@ int audio_graph2_link_normal(struct simple_util_priv *priv, struct link_info *li) { struct device_node *cpu_port = lnk; - struct device_node *cpu_ep = port_to_endpoint(cpu_port); + struct device_node *cpu_ep = of_graph_get_next_port_endpoint(cpu_port, NULL); struct device_node *codec_port = of_graph_get_remote_port(cpu_ep); int ret; @@ -883,7 +875,7 @@ int audio_graph2_link_dpcm(struct simple_util_priv *priv, struct device_node *lnk, struct link_info *li) { - struct device_node *ep = port_to_endpoint(lnk); + struct device_node *ep = of_graph_get_next_port_endpoint(lnk, NULL); struct device_node *rep = of_graph_get_remote_endpoint(ep); struct device_node *cpu_port = NULL; struct device_node *codec_port = NULL; @@ -1007,7 +999,7 @@ int audio_graph2_link_c2c(struct simple_util_priv *priv, of_node_get(lnk); port0 = lnk; ports = port_to_ports(port0); - port1 = of_get_next_child(ports, lnk); + port1 = of_graph_get_next_port(ports, port0); /* * Card2 can use original Codec2Codec settings if DT has. @@ -1037,8 +1029,8 @@ int audio_graph2_link_c2c(struct simple_util_priv *priv, dai_link->num_c2c_params = 1; } - ep0 = port_to_endpoint(port0); - ep1 = port_to_endpoint(port1); + ep0 = of_graph_get_next_port_endpoint(port0, NULL); + ep1 = of_graph_get_next_port_endpoint(port1, NULL); codec0_port = of_graph_get_remote_port(ep0); codec1_port = of_graph_get_remote_port(ep1); @@ -1144,7 +1136,7 @@ static int graph_counter(struct device_node *lnk) * CPU/Codec = N:M case has many endpoints. * We can't use of_graph_get_endpoint_count() here */ - return of_get_child_count(ports) - 1; + return of_graph_get_port_count(ports) - 1; } /* * Single CPU / Codec @@ -1158,7 +1150,7 @@ static int graph_count_normal(struct simple_util_priv *priv, struct link_info *li) { struct device_node *cpu_port = lnk; - struct device_node *cpu_ep = port_to_endpoint(cpu_port); + struct device_node *cpu_ep = of_graph_get_next_port_endpoint(cpu_port, NULL); struct device_node *codec_port = of_graph_get_remote_port(cpu_ep); /* @@ -1186,7 +1178,7 @@ static int graph_count_dpcm(struct simple_util_priv *priv, struct device_node *lnk, struct link_info *li) { - struct device_node *ep = port_to_endpoint(lnk); + struct device_node *ep = of_graph_get_next_port_endpoint(lnk, NULL); struct device_node *rport = of_graph_get_remote_port(ep); /* @@ -1228,9 +1220,9 @@ static int graph_count_c2c(struct simple_util_priv *priv, { struct device_node *ports = port_to_ports(lnk); struct device_node *port0 = lnk; - struct device_node *port1 = of_get_next_child(ports, of_node_get(lnk)); - struct device_node *ep0 = port_to_endpoint(port0); - struct device_node *ep1 = port_to_endpoint(port1); + struct device_node *port1 = of_graph_get_next_port(ports, of_node_get(port0)); + struct device_node *ep0 = of_graph_get_next_port_endpoint(port0, NULL); + struct device_node *ep1 = of_graph_get_next_port_endpoint(port1, NULL); struct device_node *codec0 = of_graph_get_remote_port(ep0); struct device_node *codec1 = of_graph_get_remote_port(ep1); From c005d3776ac77a168b7a791bfd662e533595cfeb Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 24 Oct 2024 02:20:30 +0000 Subject: [PATCH 24/36] gpu: drm: omapdrm: use new of_graph functions Now we can use new port related functions for port parsing. Use it. Signed-off-by: Kuninori Morimoto Reviewed-by: Tomi Valkeinen Acked-by: Helge Deller Link: https://lore.kernel.org/r/87cyjqb5sh.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Rob Herring (Arm) --- drivers/gpu/drm/omapdrm/dss/dpi.c | 3 ++- drivers/gpu/drm/omapdrm/dss/sdi.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/omapdrm/dss/dpi.c b/drivers/gpu/drm/omapdrm/dss/dpi.c index 030f997eccd0..b17e77f700dd 100644 --- a/drivers/gpu/drm/omapdrm/dss/dpi.c +++ b/drivers/gpu/drm/omapdrm/dss/dpi.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -709,7 +710,7 @@ int dpi_init_port(struct dss_device *dss, struct platform_device *pdev, if (!dpi) return -ENOMEM; - ep = of_get_next_child(port, NULL); + ep = of_graph_get_next_port_endpoint(port, NULL); if (!ep) return 0; diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c index 91eaae3b9481..f9ae358e8e52 100644 --- a/drivers/gpu/drm/omapdrm/dss/sdi.c +++ b/drivers/gpu/drm/omapdrm/dss/sdi.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -346,7 +347,7 @@ int sdi_init_port(struct dss_device *dss, struct platform_device *pdev, if (!sdi) return -ENOMEM; - ep = of_get_next_child(port, NULL); + ep = of_graph_get_next_port_endpoint(port, NULL); if (!ep) { r = 0; goto err_free; From 78cd57bbb4529690d152a5dce409dd91fa1a8b9b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 24 Oct 2024 02:20:35 +0000 Subject: [PATCH 25/36] fbdev: omapfb: use new of_graph functions Now we can use new port related functions for port parsing. Use it. Signed-off-by: Kuninori Morimoto Acked-by: Helge Deller Link: https://lore.kernel.org/r/87bjzab5sd.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Rob Herring (Arm) --- drivers/video/fbdev/omap2/omapfb/dss/dpi.c | 3 +- drivers/video/fbdev/omap2/omapfb/dss/dss-of.c | 66 ------------------- drivers/video/fbdev/omap2/omapfb/dss/dss.c | 20 +++--- drivers/video/fbdev/omap2/omapfb/dss/sdi.c | 3 +- include/video/omapfb_dss.h | 8 --- 5 files changed, 13 insertions(+), 87 deletions(-) diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dpi.c b/drivers/video/fbdev/omap2/omapfb/dss/dpi.c index 7c1b7d89389a..395b1139a5ae 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/dpi.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/dpi.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -845,7 +846,7 @@ int dpi_init_port(struct platform_device *pdev, struct device_node *port) if (!dpi) return -ENOMEM; - ep = omapdss_of_get_next_endpoint(port, NULL); + ep = of_graph_get_next_port_endpoint(port, NULL); if (!ep) return 0; diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss-of.c b/drivers/video/fbdev/omap2/omapfb/dss/dss-of.c index d5a43b3bf45e..c04cbe0ef173 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/dss-of.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss-of.c @@ -15,72 +15,6 @@ #include "dss.h" -struct device_node * -omapdss_of_get_next_port(const struct device_node *parent, - struct device_node *prev) -{ - struct device_node *port = NULL; - - if (!parent) - return NULL; - - if (!prev) { - struct device_node *ports; - /* - * It's the first call, we have to find a port subnode - * within this node or within an optional 'ports' node. - */ - ports = of_get_child_by_name(parent, "ports"); - if (ports) - parent = ports; - - port = of_get_child_by_name(parent, "port"); - - /* release the 'ports' node */ - of_node_put(ports); - } else { - struct device_node *ports; - - ports = of_get_parent(prev); - if (!ports) - return NULL; - - do { - port = of_get_next_child(ports, prev); - if (!port) { - of_node_put(ports); - return NULL; - } - prev = port; - } while (!of_node_name_eq(port, "port")); - - of_node_put(ports); - } - - return port; -} -EXPORT_SYMBOL_GPL(omapdss_of_get_next_port); - -struct device_node * -omapdss_of_get_next_endpoint(const struct device_node *parent, - struct device_node *prev) -{ - struct device_node *ep = NULL; - - if (!parent) - return NULL; - - do { - ep = of_get_next_child(parent, prev); - if (!ep) - return NULL; - prev = ep; - } while (!of_node_name_eq(ep, "endpoint")); - - return ep; -} -EXPORT_SYMBOL_GPL(omapdss_of_get_next_endpoint); - struct device_node *dss_of_port_get_parent_device(struct device_node *port) { struct device_node *np; diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c index d814e4baa4b3..70bb35ef48b5 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -919,10 +920,7 @@ static int dss_init_ports(struct platform_device *pdev) struct device_node *port; int r, ret = 0; - if (parent == NULL) - return 0; - - port = omapdss_of_get_next_port(parent, NULL); + port = of_graph_get_next_port(parent, NULL); if (!port) return 0; @@ -952,8 +950,9 @@ static int dss_init_ports(struct platform_device *pdev) default: break; } - } while (!ret && - (port = omapdss_of_get_next_port(parent, port)) != NULL); + + port = of_graph_get_next_port(parent, port); + } while (!ret && port); if (ret) dss_uninit_ports(pdev); @@ -966,10 +965,7 @@ static void dss_uninit_ports(struct platform_device *pdev) struct device_node *parent = pdev->dev.of_node; struct device_node *port; - if (parent == NULL) - return; - - port = omapdss_of_get_next_port(parent, NULL); + port = of_graph_get_next_port(parent, NULL); if (!port) return; @@ -1000,7 +996,9 @@ static void dss_uninit_ports(struct platform_device *pdev) default: break; } - } while ((port = omapdss_of_get_next_port(parent, port)) != NULL); + + port = of_graph_get_next_port(parent, port); + } while (port); } static int dss_video_pll_probe(struct platform_device *pdev) diff --git a/drivers/video/fbdev/omap2/omapfb/dss/sdi.c b/drivers/video/fbdev/omap2/omapfb/dss/sdi.c index d527931b2b16..22a6243d7abf 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/sdi.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/sdi.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include