From a0572c0734e4926ac51a31f97c12f752e1cdc7c8 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 1 Dec 2020 12:13:29 +0100 Subject: [PATCH 1/7] ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect The uSD card detect signal on the DH DRC02 is active-high, with a default pull down resistor on the board. Invert the polarity. Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org -- Note that this could not be tested on prototype SoMs, now that it is tested, this issue surfaced, so it needs to be fixed. Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index 62ab23824a3e..3299a42d8063 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -104,7 +104,7 @@ * are used for on-board microSD slot instead. */ /delete-property/broken-cd; - cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + cd-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>; disable-wp; }; From 1a9b001237f85d3cf11a408c2daca6a2245b2add Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 1 Dec 2020 12:13:30 +0100 Subject: [PATCH 2/7] ARM: dts: stm32: Connect card-detect signal on DHCOM The DHCOM SoM uSD slot card detect signal is connected to GPIO PG1, describe it in the DT. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index ac46ab363e1b..c77ab1bfdd3e 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -390,7 +390,7 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; st,sig-dir; st,neg-edge; st,use-ckin; From 063a60634d48ee89f697371c9850c9370e494f22 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 1 Dec 2020 12:13:31 +0100 Subject: [PATCH 3/7] ARM: dts: stm32: Disable WP on DHCOM uSD slot The uSD slot has no WP detection, disable it. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index c77ab1bfdd3e..daff5318f301 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -391,6 +391,7 @@ pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; From 087698939f30d489e785d7df3e6aa5dce2487b39 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 7 Jan 2021 16:07:42 +0100 Subject: [PATCH 4/7] ARM: dts: stm32: Disable optional TSC2004 on DRC02 board The DRC02 has no use for the on-SoM touchscreen controller, and the on-SoM touchscreen controller may not even be populated, which then results in error messages in kernel log. Disable the touchscreen controller in DT. Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index 3299a42d8063..4cabdade6432 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -87,6 +87,12 @@ }; }; +&i2c4 { + touchscreen@49 { + status = "disabled"; + }; +}; + &i2c5 { /* TP7/TP8 */ pinctrl-names = "default"; pinctrl-0 = <&i2c5_pins_a>; From bcbacfb82c7010431182a8aecb860c752e3aed8c Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 24 Dec 2020 07:24:38 +0100 Subject: [PATCH 5/7] ARM: dts: stm32: Fix GPIO hog names on DHCOM The GPIO hog node name should match regex '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', make it so and fix the following two make dtbs_check warnings: arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dt.yaml: hog-usb-port-power: $nodename:0: 'hog-usb-port-power' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: hog-usb-hub: $nodename:0: 'hog-usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$' Fixes: ac68793f49de ("ARM: dts: stm32: Add DHCOM based PicoITX board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 4 ++-- arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index 4cabdade6432..28c01cd9ac70 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -33,7 +33,7 @@ * during TX anyway and that it only controls drive enable DE * line. Hence, the RX is always enabled here. */ - rs485-rx-en { + rs485-rx-en-hog { gpio-hog; gpios = <8 GPIO_ACTIVE_HIGH>; output-low; @@ -61,7 +61,7 @@ * order to reset the Hub when USB bus is powered down, but * so far there is no such functionality. */ - usb-hub { + usb-hub-hog { gpio-hog; gpios = <2 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi index 356150d28c42..b99f2b891629 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi @@ -43,7 +43,7 @@ * in order to turn on port power when USB bus is powered up, but so * far there is no such functionality. */ - usb-port-power { + usb-port-power-hog { gpio-hog; gpios = <13 GPIO_ACTIVE_LOW>; output-low; From 10793e557acece49fe1c55e8f4563f6b89543c18 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 29 Dec 2020 18:55:20 +0100 Subject: [PATCH 6/7] ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0. Due to a change in gpiolib-of.c, setting flags to GPIO_ACTIVE_LOW and using output-low DT property leads to the GPIO being set high instead. Fixes: ac68793f49de ("ARM: dts: stm32: Add DHCOM based PicoITX board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi index b99f2b891629..32700cca24c8 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi @@ -45,7 +45,7 @@ */ usb-port-power-hog { gpio-hog; - gpios = <13 GPIO_ACTIVE_LOW>; + gpios = <13 0>; output-low; line-name = "usb-port-power"; }; From 83d411224025ac1baab981e3d2f5d29e7761541d Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 29 Dec 2020 18:55:21 +0100 Subject: [PATCH 7/7] ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02 The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0. Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the correctness of the DT. Fixes: fde180f06d7b ("ARM: dts: stm32: Add DHSOM based DRC02 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index 28c01cd9ac70..5088dd3a301b 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -35,7 +35,7 @@ */ rs485-rx-en-hog { gpio-hog; - gpios = <8 GPIO_ACTIVE_HIGH>; + gpios = <8 0>; output-low; line-name = "rs485-rx-en"; }; @@ -63,7 +63,7 @@ */ usb-hub-hog { gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; + gpios = <2 0>; output-high; line-name = "usb-hub-reset"; };