ASoC: Set BQ parameters for some Dell models

There are some Dell SKUs that need to set the parameters of the crossover filter (biquad). Each amplifier connects to one tweeter speaker and one woofer speaker. We should control HPF/LPF to output the proper frequency for the different speakers. If the codec driver got the BQ parameters from the device property, it will apply these parameters to the hardware.
2025-01-20 21:04:40 +08:00 · 2022-11-11 17:01:39 +00:00 · 2022-11-11 17:01:39 +00:00 · e5fa3ccad3
commit e5fa3ccad3
parent 9f63869a56 cf6946d950
1113 changed files with 14196 additions and 8987 deletions
--- a/.mailmap
+++ b/.mailmap
@ -104,6 +104,7 @@ Christoph Hellwig <hch@lst.de>
 Colin Ian King <colin.i.king@gmail.com> <colin.king@canonical.com>
 Corey Minyard <minyard@acm.org>
 Damian Hobson-Garcia <dhobsong@igel.co.jp>
+Dan Carpenter <error27@gmail.com> <dan.carpenter@oracle.com>
 Daniel Borkmann <daniel@iogearbox.net> <danborkmann@googlemail.com>
 Daniel Borkmann <daniel@iogearbox.net> <danborkmann@iogearbox.net>
 Daniel Borkmann <daniel@iogearbox.net> <daniel.borkmann@tik.ee.ethz.ch>
@ -353,7 +354,8 @@ Peter Oruba <peter@oruba.de>
 Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
 Punit Agrawal <punitagrawal@gmail.com> <punit.agrawal@arm.com>
-Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
+Qais Yousef <qyousef@layalina.io> <qais.yousef@imgtec.com>
+Qais Yousef <qyousef@layalina.io> <qais.yousef@arm.com>
 Quentin Monnet <quentin@isovalent.com> <quentin.monnet@netronome.com>
 Quentin Perret <qperret@qperret.net> <quentin.perret@arm.com>
 Rafael J. Wysocki <rjw@rjwysocki.net> <rjw@sisk.pl>
--- a/Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers
@ -10,7 +10,7 @@ Description:	A collection of all the memory tiers allocated.


 What:		/sys/devices/virtual/memory_tiering/memory_tierN/
-		/sys/devices/virtual/memory_tiering/memory_tierN/nodes
+		/sys/devices/virtual/memory_tiering/memory_tierN/nodelist
 Date:		August 2022
 Contact:	Linux memory management mailing list <linux-mm@kvack.org>
 Description:	Directory with details of a specific memory tier
@ -21,5 +21,5 @@ Description:	Directory with details of a specific memory tier
 		A smaller value of N implies a higher (faster) memory tier in the
 		hierarchy.

-		nodes: NUMA nodes that are part of this memory tier.
+		nodelist: NUMA nodes that are part of this memory tier.

--- a/Documentation/admin-guide/acpi/index.rst
+++ b/Documentation/admin-guide/acpi/index.rst
@ -9,7 +9,6 @@ the Linux ACPI support.
   :maxdepth: 1

   initrd_table_override
-   dsdt-override
   ssdt-overlays
   cppc_sysfs
   fan_performance_states
--- a/Documentation/admin-guide/device-mapper/verity.rst
+++ b/Documentation/admin-guide/device-mapper/verity.rst
@ -141,6 +141,10 @@ root_hash_sig_key_desc <key_description>
    also gain new certificates at run time if they are signed by a certificate
    already in the secondary trusted keyring.

+try_verify_in_tasklet
+    If verity hashes are in cache, verify data blocks in kernel tasklet instead
+    of workqueue. This option can reduce IO latency.
+
 Theory of operation
 ===================

--- a/Documentation/admin-guide/media/vivid.rst
+++ b/Documentation/admin-guide/media/vivid.rst
@ -1318,7 +1318,7 @@ instance. This setup would require the following commands:
 	$ v4l2-ctl -d2 -i2
 	$ v4l2-ctl -d2 -c horizontal_movement=4
 	$ v4l2-ctl -d1 --overlay=1
-	$ v4l2-ctl -d1 -c loop_video=1
+	$ v4l2-ctl -d0 -c loop_video=1
 	$ v4l2-ctl -d2 --stream-mmap --overlay=1

 And from another console:
--- a/Documentation/arm64/booting.rst
+++ b/Documentation/arm64/booting.rst
@ -340,6 +340,14 @@ Before jumping into the kernel, the following conditions must be met:
    - SMCR_EL2.LEN must be initialised to the same value for all CPUs the
      kernel will execute on.

+    - HWFGRTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
+
+    - HWFGWTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
+
+    - HWFGRTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+
+    - HWFGWTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+
  For CPUs with the Scalable Matrix Extension FA64 feature (FEAT_SME_FA64)

  - If EL3 is present:
--- a/Documentation/arm64/cpu-feature-registers.rst
+++ b/Documentation/arm64/cpu-feature-registers.rst
@ -92,7 +92,7 @@ operation if the source belongs to the supported system register space.

 The infrastructure emulates only the following system register space::

-	Op0=3, Op1=0, CRn=0, CRm=0,4,5,6,7
+	Op0=3, Op1=0, CRn=0, CRm=0,2,3,4,5,6,7

 (See Table C5-6 'System instruction encodings for non-Debug System
 register accesses' in ARMv8 ARM DDI 0487A.h, for the list of
@ -293,6 +293,42 @@ infrastructure:
     | WFXT                         | [3-0]   |    y    |
     +------------------------------+---------+---------+

+  10) MVFR0_EL1 - AArch32 Media and VFP Feature Register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | FPDP                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  11) MVFR1_EL1 - AArch32 Media and VFP Feature Register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | SIMDFMAC                     | [31-28] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDSP                       | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDInt                      | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDLS                       | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  12) ID_ISAR5_EL1 - AArch32 Instruction Set Attribute Register 5
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | CRC32                        | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SHA2                         | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SHA1                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+     | AES                          | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+

 Appendix I: Example
 -------------------
--- a/Documentation/block/ublk.rst
+++ b/Documentation/block/ublk.rst
@ -144,6 +144,42 @@ managing and controlling ublk devices with help of several control commands:
  For retrieving device info via ``ublksrv_ctrl_dev_info``. It is the server's
  responsibility to save IO target specific info in userspace.

+- ``UBLK_CMD_START_USER_RECOVERY``
+
+  This command is valid if ``UBLK_F_USER_RECOVERY`` feature is enabled. This
+  command is accepted after the old process has exited, ublk device is quiesced
+  and ``/dev/ublkc*`` is released. User should send this command before he starts
+  a new process which re-opens ``/dev/ublkc*``. When this command returns, the
+  ublk device is ready for the new process.
+
+- ``UBLK_CMD_END_USER_RECOVERY``
+
+  This command is valid if ``UBLK_F_USER_RECOVERY`` feature is enabled. This
+  command is accepted after ublk device is quiesced and a new process has
+  opened ``/dev/ublkc*`` and get all ublk queues be ready. When this command
+  returns, ublk device is unquiesced and new I/O requests are passed to the
+  new process.
+
+- user recovery feature description
+
+  Two new features are added for user recovery: ``UBLK_F_USER_RECOVERY`` and
+  ``UBLK_F_USER_RECOVERY_REISSUE``.
+
+  With ``UBLK_F_USER_RECOVERY`` set, after one ubq_daemon(ublk server's io
+  handler) is dying, ublk does not delete ``/dev/ublkb*`` during the whole
+  recovery stage and ublk device ID is kept. It is ublk server's
+  responsibility to recover the device context by its own knowledge.
+  Requests which have not been issued to userspace are requeued. Requests
+  which have been issued to userspace are aborted.
+
+  With ``UBLK_F_USER_RECOVERY_REISSUE`` set, after one ubq_daemon(ublk
+  server's io handler) is dying, contrary to ``UBLK_F_USER_RECOVERY``,
+  requests which have been issued to userspace are requeued and will be
+  re-issued to the new process after handling ``UBLK_CMD_END_USER_RECOVERY``.
+  ``UBLK_F_USER_RECOVERY_REISSUE`` is designed for backends who tolerate
+  double-write since the driver may issue the same I/O request twice. It
+  might be useful to a read-only FS or a VM backend.
+
 Data plane
 ----------

--- a/Documentation/core-api/kernel-api.rst
+++ b/Documentation/core-api/kernel-api.rst
@ -118,6 +118,12 @@ Text Searching
 CRC and Math Functions in Linux
 ===============================

+Arithmetic Overflow Checking
+----------------------------
+
+.. kernel-doc:: include/linux/overflow.h
+   :internal:
+
 CRC Functions
 -------------

--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
@ -1,9 +0,0 @@
-Dongwoon Anatech DW9714 camera voice coil lens driver
-
-DW9174 is a 10-bit DAC with current sink capability. It is intended
-for driving voice coil lenses in camera modules.
-
-Mandatory properties:
-
- compatible: "dongwoon,dw9714"
- reg: I²C slave address
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9714 camera voice coil lens driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  DW9174 is a 10-bit DAC with current sink capability. It is intended for
+  driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    const: dongwoon,dw9714
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      XSD pin for shutdown (active low)
+
+  vcc-supply:
+    description: VDD power supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-lens@c {
+            compatible = "dongwoon,dw9714";
+            reg = <0x0c>;
+            vcc-supply = <&reg_csi_1v8>;
+        };
+    };
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@ -8,7 +8,6 @@ title: Samsung S3FWRN5 NCI NFC Controller

 maintainers:
  - Krzysztof Kozlowski <krzk@kernel.org>
-  - Krzysztof Opasiak <k.opasiak@samsung.com>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@ -274,10 +274,6 @@ patternProperties:
          slew-rate:
            enum: [0, 1]

-          output-enable:
-            description:
-              This will internally disable the tri-state for MIO pins.
-
          drive-strength:
            description:
              Selects the drive strength for MIO pins, in mA.
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
@ -81,6 +81,9 @@ properties:

          power-supply: true

+          power-domains:
+            maxItems: 1
+
          resets:
            description: |
              A number of phandles to resets that need to be asserted during
--- a/Documentation/driver-api/basics.rst
+++ b/Documentation/driver-api/basics.rst
@ -107,9 +107,6 @@ Kernel utility functions
 .. kernel-doc:: kernel/panic.c
   :export:

-.. kernel-doc:: include/linux/overflow.h
-   :internal:
-
 Device Resource Management
 --------------------------

--- a/Documentation/driver-api/driver-model/devres.rst
+++ b/Documentation/driver-api/driver-model/devres.rst
@ -279,6 +279,7 @@ GPIO
  devm_gpio_request_one()

 I2C
+  devm_i2c_add_adapter()
  devm_i2c_new_dummy_device()

 IIO
--- a/Documentation/driver-api/media/mc-core.rst
+++ b/Documentation/driver-api/media/mc-core.rst
@ -214,18 +214,29 @@ Link properties can be modified at runtime by calling
 Pipelines and media streams
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^

+A media stream is a stream of pixels or metadata originating from one or more
+source devices (such as a sensors) and flowing through media entity pads
+towards the final sinks. The stream can be modified on the route by the
+devices (e.g. scaling or pixel format conversions), or it can be split into
+multiple branches, or multiple branches can be merged.
+
+A media pipeline is a set of media streams which are interdependent. This
+interdependency can be caused by the hardware (e.g. configuration of a second
+stream cannot be changed if the first stream has been enabled) or by the driver
+due to the software design. Most commonly a media pipeline consists of a single
+stream which does not branch.
+
 When starting streaming, drivers must notify all entities in the pipeline to
 prevent link states from being modified during streaming by calling
 :c:func:`media_pipeline_start()`.

-The function will mark all entities connected to the given entity through
-enabled links, either directly or indirectly, as streaming.
+The function will mark all the pads which are part of the pipeline as streaming.

 The struct media_pipeline instance pointed to by
-the pipe argument will be stored in every entity in the pipeline.
+the pipe argument will be stored in every pad in the pipeline.
 Drivers should embed the struct media_pipeline
 in higher-level pipeline structures and can then access the
-pipeline through the struct media_entity
+pipeline through the struct media_pad
 pipe field.

 Calls to :c:func:`media_pipeline_start()` can be nested.
--- a/Documentation/hwmon/corsair-psu.rst
+++ b/Documentation/hwmon/corsair-psu.rst
@ -19,6 +19,8 @@ Supported devices:

  Corsair HX1200i

+  Corsair HX1500i
+
  Corsair RM550i

  Corsair RM650i
--- a/Documentation/kbuild/reproducible-builds.rst
+++ b/Documentation/kbuild/reproducible-builds.rst
@ -119,6 +119,16 @@ To avoid this, you can make the vDSO different for different
 kernel versions by including an arbitrary string of "salt" in it.
 This is specified by the Kconfig symbol ``CONFIG_BUILD_SALT``.

+Git
+---
+
+Uncommitted changes or different commit ids in git can also lead
+to different compilation results. For example, after executing
+``git reset HEAD^``, even if the code is the same, the
+``include/config/kernel.release`` generated during compilation
+will be different, which will eventually lead to binary differences.
+See ``scripts/setlocalversion`` for details.
+
 .. _KBUILD_BUILD_TIMESTAMP: kbuild.html#kbuild-build-timestamp
 .. _KBUILD_BUILD_USER and KBUILD_BUILD_HOST: kbuild.html#kbuild-build-user-kbuild-build-host
 .. _KCFLAGS: kbuild.html#kcflags
--- a/Documentation/kernel-hacking/hacking.rst
+++ b/Documentation/kernel-hacking/hacking.rst
@ -120,7 +120,7 @@ You can tell you are in a softirq (or tasklet) using the
 .. warning::

    Beware that this will return a false positive if a
-    :ref:`botton half lock <local_bh_disable>` is held.
+    :ref:`bottom half lock <local_bh_disable>` is held.

 Some Basic Rules
 ================
--- a/Documentation/process/2.Process.rst
+++ b/Documentation/process/2.Process.rst
@ -126,17 +126,10 @@ than one development cycle past their initial release. So, for example, the
 5.2.21 was the final stable update of the 5.2 release.

 Some kernels are designated "long term" kernels; they will receive support
-for a longer period.  As of this writing, the current long term kernels
-and their maintainers are:
+for a longer period.  Please refer to the following link for the list of active
+long term kernel versions and their maintainers:

-	======  ================================	=======================
-	3.16	Ben Hutchings				(very long-term kernel)
-	4.4	Greg Kroah-Hartman & Sasha Levin	(very long-term kernel)
-	4.9	Greg Kroah-Hartman & Sasha Levin
-	4.14	Greg Kroah-Hartman & Sasha Levin
-	4.19	Greg Kroah-Hartman & Sasha Levin
-	5.4	Greg Kroah-Hartman & Sasha Levin
-	======  ================================	=======================
+	https://www.kernel.org/category/releases.html

 The selection of a kernel for long-term support is purely a matter of a
 maintainer having the need and the time to maintain that release.  There
--- a/Documentation/process/howto.rst
+++ b/Documentation/process/howto.rst
@ -36,7 +36,7 @@ experience, the following books are good for, if anything, reference:
 - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]

 The kernel is written using GNU C and the GNU toolchain.  While it
-adheres to the ISO C89 standard, it uses a number of extensions that are
+adheres to the ISO C11 standard, it uses a number of extensions that are
 not featured in the standard.  The kernel is a freestanding C
 environment, with no reliance on the standard C library, so some
 portions of the C standard are not supported.  Arbitrary long long
--- a/Documentation/process/maintainer-netdev.rst
+++ b/Documentation/process/maintainer-netdev.rst
@ -319,3 +319,13 @@ unpatched tree to confirm infrastructure didn't mangle it.
 Finally, go back and read
 :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
 to be sure you are not repeating some common mistake documented there.
+
+My company uses peer feedback in employee performance reviews. Can I ask netdev maintainers for feedback?
+---------------------------------------------------------------------------------------------------------
+
+Yes, especially if you spend significant amount of time reviewing code
+and go out of your way to improve shared infrastructure.
+
+The feedback must be requested by you, the contributor, and will always
+be shared with you (even if you request for it to be submitted to your
+manager).
--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@ -39,7 +39,7 @@ Documentation written by Tom Zanussi
  will use the event's kernel stacktrace as the key.  The keywords
  'keys' or 'key' can be used to specify keys, and the keywords
  'values', 'vals', or 'val' can be used to specify values.  Compound
-  keys consisting of up to two fields can be specified by the 'keys'
+  keys consisting of up to three fields can be specified by the 'keys'
  keyword.  Hashing a compound key produces a unique entry in the
  table for each unique combination of component keys, and can be
  useful for providing more fine-grained summaries of event data.
--- a/Documentation/translations/it_IT/process/howto.rst
+++ b/Documentation/translations/it_IT/process/howto.rst
@ -44,7 +44,7 @@ altro, utili riferimenti:
 - "C:  A Reference Manual" di Harbison and Steele [Prentice Hall]

 Il kernel è stato scritto usando GNU C e la toolchain GNU.
-Sebbene si attenga allo standard ISO C89, esso utilizza una serie di
+Sebbene si attenga allo standard ISO C11, esso utilizza una serie di
 estensioni che non sono previste in questo standard. Il kernel è un
 ambiente C indipendente, che non ha alcuna dipendenza dalle librerie
 C standard, così alcune parti del C standard non sono supportate.
--- a/Documentation/translations/ja_JP/howto.rst
+++ b/Documentation/translations/ja_JP/howto.rst
@ -65,7 +65,7 @@ Linux カーネル開発のやり方
 - 『新・詳説 C 言語 H&S リファレンス』 (サミュエル P ハービソン/ガイ L スティール共著 斉藤 信男監訳)[ソフトバンク]

 カーネルは GNU C と GNU ツールチェインを使って書かれています。カーネル
-は ISO C89 仕様に準拠して書く一方で、標準には無い言語拡張を多く使って
+は ISO C11 仕様に準拠して書く一方で、標準には無い言語拡張を多く使って
 います。カーネルは標準 C ライブラリに依存しない、C 言語非依存環境です。
 そのため、C の標準の中で使えないものもあります。特に任意の long long
 の除算や浮動小数点は使えません。カーネルがツールチェインや C 言語拡張
--- a/Documentation/translations/ko_KR/howto.rst
+++ b/Documentation/translations/ko_KR/howto.rst
@ -62,7 +62,7 @@ Documentation/process/howto.rst
 - "Practical C Programming" by Steve Oualline [O'Reilly]
 - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]

-커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C89 표준을
+커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C11 표준을
 따르는 반면 표준에 있지 않은 많은 확장기능도 가지고 있다. 커널은 표준 C
 라이브러리와는 관계없이 freestanding C 환경이어서 C 표준의 일부는
 지원되지 않는다. 임의의 long long 나누기나 floating point는 지원되지 않는다.
--- a/Documentation/translations/zh_CN/process/howto.rst
+++ b/Documentation/translations/zh_CN/process/howto.rst
@ -45,7 +45,7 @@ Linux内核大部分是由C语言写成的，一些体系结构相关的代码
 - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
   《C语言参考手册（原书第5版）》（邱仲潘 等译）[机械工业出版社]

-Linux内核使用GNU C和GNU工具链开发。虽然它遵循ISO C89标准，但也用到了一些
+Linux内核使用GNU C和GNU工具链开发。虽然它遵循ISO C11标准，但也用到了一些
 标准中没有定义的扩展。内核是自给自足的C环境，不依赖于标准C库的支持，所以
 并不支持C标准中的部分定义。比如long long类型的大数除法和浮点运算就不允许
 使用。有时候确实很难弄清楚内核对工具链的要求和它所使用的扩展，不幸的是目
--- a/Documentation/translations/zh_TW/process/howto.rst
+++ b/Documentation/translations/zh_TW/process/howto.rst
@ -48,7 +48,7 @@ Linux內核大部分是由C語言寫成的，一些體系結構相關的代碼
 - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
   《C語言參考手冊（原書第5版）》（邱仲潘 等譯）[機械工業出版社]

-Linux內核使用GNU C和GNU工具鏈開發。雖然它遵循ISO C89標準，但也用到了一些
+Linux內核使用GNU C和GNU工具鏈開發。雖然它遵循ISO C11標準，但也用到了一些
 標準中沒有定義的擴展。內核是自給自足的C環境，不依賴於標準C庫的支持，所以
 並不支持C標準中的部分定義。比如long long類型的大數除法和浮點運算就不允許
 使用。有時候確實很難弄清楚內核對工具鏈的要求和它所使用的擴展，不幸的是目
--- a/Documentation/userspace-api/media/cec.h.rst.exceptions
+++ b/Documentation/userspace-api/media/cec.h.rst.exceptions
@ -239,6 +239,7 @@ ignore define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL
 ignore define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE
 ignore define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX
 ignore define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX
+ignore define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_VOLUME_LEVEL

 ignore define CEC_MSG_GIVE_FEATURES

@ -487,6 +488,7 @@ ignore define CEC_OP_SYS_AUD_STATUS_ON

 ignore define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST
 ignore define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS
+ignore define CEC_MSG_SET_AUDIO_VOLUME_LEVEL

 ignore define CEC_OP_AUD_FMT_ID_CEA861
 ignore define CEC_OP_AUD_FMT_ID_CEA861_CXT
--- a/Documentation/userspace-api/media/v4l/libv4l-introduction.rst
+++ b/Documentation/userspace-api/media/v4l/libv4l-introduction.rst
@ -136,9 +136,9 @@ V4L2 functions

   operates like the :c:func:`read()` function.

-.. c:function:: void v4l2_mmap(void *start, size_t length, int prot, int flags, int fd, int64_t offset);
+.. c:function:: void *v4l2_mmap(void *start, size_t length, int prot, int flags, int fd, int64_t offset);

-   operates like the :c:func:`munmap()` function.
+   operates like the :c:func:`mmap()` function.

 .. c:function:: int v4l2_munmap(void *_start, size_t length);

--- a/97
+++ b/97
@ -3984,7 +3984,7 @@ M:	Rafał Miłecki <rafal@milecki.pl>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
 F:	arch/arm64/boot/dts/broadcom/bcmbca/*
 N:	bcmbca
@ -4009,7 +4009,7 @@ R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	drivers/pci/controller/pcie-brcmstb.c
 F:	drivers/staging/vc04_services
@ -4023,7 +4023,7 @@ M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 S:	Maintained
-T:	git git://github.com/broadcom/mach-bcm
+T:	git https://github.com/broadcom/mach-bcm
 F:	arch/arm/mach-bcm/
 N:	bcm281*
 N:	bcm113*
@ -4088,7 +4088,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	arch/arm/boot/dts/bcm7*.dts*
 F:	arch/arm/include/asm/hardware/cache-b15-rac.h
@ -4101,6 +4101,7 @@ N:	bcm7038
 N:	bcm7120

 BROADCOM BDC DRIVER
+M:	Justin Chen <justinpopo6@gmail.com>
 M:	Al Cooper <alcooperx@gmail.com>
 L:	linux-usb@vger.kernel.org
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
@ -4120,7 +4121,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	arch/mips/bmips/*
 F:	arch/mips/boot/dts/brcm/bcm*.dts*
 F:	arch/mips/include/asm/mach-bmips/*
@ -4207,6 +4208,7 @@ F:	Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
 F:	drivers/tty/serial/8250/8250_bcm7271.c

 BROADCOM BRCMSTB USB EHCI DRIVER
+M:	Justin Chen <justinpopo6@gmail.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-usb@vger.kernel.org
@ -4223,6 +4225,7 @@ F:	Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
 F:	drivers/usb/misc/brcmstb-usb-pinmap.c

 BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
+M:	Justin Chen <justinpopo6@gmail.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-kernel@vger.kernel.org
@ -4259,7 +4262,7 @@ M:	Scott Branden <sbranden@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	arch/arm64/boot/dts/broadcom/northstar2/*
 F:	arch/arm64/boot/dts/broadcom/stingray/*
 F:	drivers/clk/bcm/clk-ns*
@ -4329,7 +4332,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	drivers/soc/bcm/bcm63xx/bcm-pmb.c
 F:	include/dt-bindings/soc/bcm-pmb.h

@ -4459,13 +4462,15 @@ M:	Josef Bacik <josef@toxicpanda.com>
 M:	David Sterba <dsterba@suse.com>
 L:	linux-btrfs@vger.kernel.org
 S:	Maintained
-W:	http://btrfs.wiki.kernel.org/
-Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
+W:	https://btrfs.readthedocs.io
+W:	https://btrfs.wiki.kernel.org/
+Q:	https://patchwork.kernel.org/project/linux-btrfs/list/
 C:	irc://irc.libera.chat/btrfs
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux.git
 F:	Documentation/filesystems/btrfs.rst
 F:	fs/btrfs/
 F:	include/linux/btrfs*
+F:	include/trace/events/btrfs.h
 F:	include/uapi/linux/btrfs*

 BTTV VIDEO4LINUX DRIVER
@ -5036,7 +5041,7 @@ F:	drivers/scsi/snic/

 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
-M:	Govindarajulu Varadarajan <_govind@gmx.com>
+M:	Satish Kharat <satishkh@cisco.com>
 S:	Supported
 F:	drivers/net/ethernet/cisco/enic/

@ -5266,6 +5271,7 @@ F:	tools/testing/selftests/cgroup/

 CONTROL GROUP - BLOCK IO CONTROLLER (BLKIO)
 M:	Tejun Heo <tj@kernel.org>
+M:	Josef Bacik <josef@toxicpanda.com>
 M:	Jens Axboe <axboe@kernel.dk>
 L:	cgroups@vger.kernel.org
 L:	linux-block@vger.kernel.org
@ -5273,6 +5279,7 @@ T:	git git://git.kernel.dk/linux-block
 F:	Documentation/admin-guide/cgroup-v1/blkio-controller.rst
 F:	block/bfq-cgroup.c
 F:	block/blk-cgroup.c
+F:	block/blk-iocost.c
 F:	block/blk-iolatency.c
 F:	block/blk-throttle.c
 F:	include/linux/blk-cgroup.h
@ -6280,7 +6287,7 @@ M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
-F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
+F:	Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
 F:	drivers/media/i2c/dw9714.c

 DONGWOON DW9768 LENS VOICE COIL DRIVER
@ -9210,7 +9217,7 @@ W:	https://www.hisilicon.com
 F:	drivers/i2c/busses/i2c-hisi.c

 HISILICON LPC BUS DRIVER
-M:	john.garry@huawei.com
+M:	Jay Fang <f.fangjian@huawei.com>
 S:	Maintained
 W:	http://www.hisilicon.com
 F:	Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
@ -9771,7 +9778,10 @@ S:	Supported
 F:	drivers/pci/hotplug/rpaphp*

 IBM Power SRIOV Virtual NIC Device Driver
-M:	Dany Madden <drt@linux.ibm.com>
+M:	Haren Myneni <haren@linux.ibm.com>
+M:	Rick Lindsley <ricklind@linux.ibm.com>
+R:	Nick Child <nnac123@linux.ibm.com>
+R:	Dany Madden <danymadden@us.ibm.com>
 R:	Thomas Falcon <tlfalcon@linux.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@ -11241,7 +11251,7 @@ L:	kvm@vger.kernel.org
 L:	kvm-riscv@lists.infradead.org
 L:	linux-riscv@lists.infradead.org
 S:	Maintained
-T:	git git://github.com/kvm-riscv/linux.git
+T:	git https://github.com/kvm-riscv/linux.git
 F:	arch/riscv/include/asm/kvm*
 F:	arch/riscv/include/uapi/asm/kvm*
 F:	arch/riscv/kvm/
@ -11254,7 +11264,6 @@ M:	Claudio Imbrenda <imbrenda@linux.ibm.com>
 R:	David Hildenbrand <david@redhat.com>
 L:	kvm@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git
 F:	Documentation/virt/kvm/s390*
 F:	arch/s390/include/asm/gmap.h
@ -14520,7 +14529,7 @@ L:	linux-nilfs@vger.kernel.org
 S:	Supported
 W:	https://nilfs.sourceforge.io/
 W:	https://nilfs.osdn.jp/
-T:	git git://github.com/konis/nilfs2.git
+T:	git https://github.com/konis/nilfs2.git
 F:	Documentation/filesystems/nilfs2.rst
 F:	fs/nilfs2/
 F:	include/trace/events/nilfs2.h
@ -14709,6 +14718,12 @@ F:	drivers/nvme/target/auth.c
 F:	drivers/nvme/target/fabrics-cmd-auth.c
 F:	include/linux/nvme-auth.h

+NVM EXPRESS HARDWARE MONITORING SUPPORT
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	linux-nvme@lists.infradead.org
+S:	Supported
+F:	drivers/nvme/host/hwmon.c
+
 NVM EXPRESS FC TRANSPORT DRIVERS
 M:	James Smart <james.smart@broadcom.com>
 L:	linux-nvme@lists.infradead.org
@ -15426,6 +15441,7 @@ S:	Maintained
 W:	http://openvswitch.org
 F:	include/uapi/linux/openvswitch.h
 F:	net/openvswitch/
+F:	tools/testing/selftests/net/openvswitch/

 OPERATING PERFORMANCE POINTS (OPP)
 M:	Viresh Kumar <vireshk@kernel.org>
@ -15617,7 +15633,7 @@ F:	drivers/input/serio/gscps2.c
 F:	drivers/input/serio/hp_sdc*
 F:	drivers/parisc/
 F:	drivers/parport/parport_gsc.*
-F:	drivers/tty/serial/8250/8250_gsc.c
+F:	drivers/tty/serial/8250/8250_parisc.c
 F:	drivers/video/console/sti*
 F:	drivers/video/fbdev/sti*
 F:	drivers/video/logo/logo_parisc*
@ -15839,7 +15855,7 @@ F:	Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
 F:	drivers/pci/controller/dwc/*designware*

 PCI DRIVER FOR TI DRA7XX/J721E
-M:	Kishon Vijay Abraham I <kishon@ti.com>
+M:	Vignesh Raghavendra <vigneshr@ti.com>
 L:	linux-omap@vger.kernel.org
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -15856,10 +15872,10 @@ F:	Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
 F:	drivers/pci/controller/pci-v3-semi.c

 PCI ENDPOINT SUBSYSTEM
-M:	Kishon Vijay Abraham I <kishon@ti.com>
 M:	Lorenzo Pieralisi <lpieralisi@kernel.org>
 R:	Krzysztof Wilczyński <kw@linux.com>
 R:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+R:	Kishon Vijay Abraham I <kishon@kernel.org>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-pci/list/
@ -16665,6 +16681,7 @@ F:	Documentation/driver-api/ptp.rst
 F:	drivers/net/phy/dp83640*
 F:	drivers/ptp/*
 F:	include/linux/ptp_cl*
+K:	(?:\b|_)ptp(?:\b|_)

 PTP VIRTUAL CLOCK SUPPORT
 M:	Yangbo Lu <yangbo.lu@nxp.com>
@ -17801,7 +17818,7 @@ S:	Odd Fixes
 F:	drivers/tty/serial/rp2.*

 ROHM BD99954 CHARGER IC
-R:	Matti Vaittinen <mazziesaccount@gmail.com>
+M:	Matti Vaittinen <mazziesaccount@gmail.com>
 S:	Supported
 F:	drivers/power/supply/bd99954-charger.c
 F:	drivers/power/supply/bd99954-charger.h
@ -17824,7 +17841,7 @@ F:	drivers/regulator/bd9571mwv-regulator.c
 F:	include/linux/mfd/bd9571mwv.h

 ROHM POWER MANAGEMENT IC DEVICE DRIVERS
-R:	Matti Vaittinen <mazziesaccount@gmail.com>
+M:	Matti Vaittinen <mazziesaccount@gmail.com>
 S:	Supported
 F:	drivers/clk/clk-bd718x7.c
 F:	drivers/gpio/gpio-bd71815.c
@ -17986,7 +18003,6 @@ R:	Christian Borntraeger <borntraeger@linux.ibm.com>
 R:	Sven Schnelle <svens@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git
 F:	Documentation/driver-api/s390-drivers.rst
 F:	Documentation/s390/
@ -17998,7 +18014,6 @@ M:	Vineeth Vijayan <vneethv@linux.ibm.com>
 M:	Peter Oberparleiter <oberpar@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/cio/

 S390 DASD DRIVER
@ -18006,7 +18021,6 @@ M:	Stefan Haberland <sth@linux.ibm.com>
 M:	Jan Hoeppner <hoeppner@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	block/partitions/ibm.c
 F:	drivers/s390/block/dasd*
 F:	include/linux/dasd_mod.h
@ -18016,7 +18030,6 @@ M:	Matthew Rosato <mjrosato@linux.ibm.com>
 M:	Gerald Schaefer <gerald.schaefer@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/iommu/s390-iommu.c

 S390 IUCV NETWORK LAYER
@ -18025,7 +18038,6 @@ M:	Wenjia Zhang <wenjia@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 L:	netdev@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/net/*iucv*
 F:	include/net/iucv/
 F:	net/iucv/
@ -18036,7 +18048,6 @@ M:	Wenjia Zhang <wenjia@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 L:	netdev@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/net/

 S390 PCI SUBSYSTEM
@ -18044,7 +18055,6 @@ M:	Niklas Schnelle <schnelle@linux.ibm.com>
 M:	Gerald Schaefer <gerald.schaefer@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	arch/s390/pci/
 F:	drivers/pci/hotplug/s390_pci_hpc.c
 F:	Documentation/s390/pci.rst
@ -18055,7 +18065,6 @@ M:	Halil Pasic <pasic@linux.ibm.com>
 M:	Jason Herne <jjherne@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	Documentation/s390/vfio-ap*
 F:	drivers/s390/crypto/vfio_ap*

@ -18084,7 +18093,6 @@ S390 ZCRYPT DRIVER
 M:	Harald Freudenberger <freude@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/crypto/

 S390 ZFCP DRIVER
@ -18092,7 +18100,6 @@ M:	Steffen Maier <maier@linux.ibm.com>
 M:	Benjamin Block <bblock@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	drivers/s390/scsi/zfcp_*

 S3C ADC BATTERY DRIVER
@ -18131,7 +18138,6 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	drivers/staging/media/deprecated/saa7146/
-F:	include/media/drv-intf/saa7146*

 SAFESETID SECURITY MODULE
 M:	Micah Morton <mortonm@chromium.org>
@ -18211,7 +18217,6 @@ F:	include/media/drv-intf/s3c_camif.h

 SAMSUNG S3FWRN5 NFC DRIVER
 M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-M:	Krzysztof Opasiak <k.opasiak@samsung.com>
 L:	linux-nfc@lists.01.org (subscribers-only)
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@ -18666,7 +18671,6 @@ M:	Wenjia Zhang <wenjia@linux.ibm.com>
 M:	Jan Karcher <jaka@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
-W:	http://www.ibm.com/developerworks/linux/linux390/
 F:	net/smc/

 SHARP GP2AP002A00F/GP2AP002S00F SENSOR DRIVER
@ -18777,7 +18781,7 @@ M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 L:	linux-riscv@lists.infradead.org
 S:	Supported
-T:	git git://github.com/sifive/riscv-linux.git
+T:	git https://github.com/sifive/riscv-linux.git
 N:	sifive
 K:	[^@]sifive

@ -21181,15 +21185,6 @@ S:	Maintained
 F:	Documentation/usb/ehci.rst
 F:	drivers/usb/host/ehci*

-USB GADGET/PERIPHERAL SUBSYSTEM
-M:	Felipe Balbi <balbi@kernel.org>
-L:	linux-usb@vger.kernel.org
-S:	Maintained
-W:	http://www.linux-usb.org/gadget
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
-F:	drivers/usb/gadget/
-F:	include/linux/usb/gadget*
-
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
 M:	Jiri Kosina <jikos@kernel.org>
 M:	Benjamin Tissoires <benjamin.tissoires@redhat.com>
@ -21293,16 +21288,9 @@ L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 W:	https://github.com/petkan/pegasus
-T:	git git://github.com/petkan/pegasus.git
+T:	git https://github.com/petkan/pegasus.git
 F:	drivers/net/usb/pegasus.*

-USB PHY LAYER
-M:	Felipe Balbi <balbi@kernel.org>
-L:	linux-usb@vger.kernel.org
-S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
-F:	drivers/usb/phy/
-
 USB PRINTER DRIVER (usblp)
 M:	Pete Zaitcev <zaitcev@redhat.com>
 L:	linux-usb@vger.kernel.org
@ -21330,7 +21318,7 @@ L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 W:	https://github.com/petkan/rtl8150
-T:	git git://github.com/petkan/rtl8150.git
+T:	git https://github.com/petkan/rtl8150.git
 F:	drivers/net/usb/rtl8150.c

 USB SERIAL SUBSYSTEM
@ -22121,6 +22109,7 @@ F:	Documentation/watchdog/
 F:	drivers/watchdog/
 F:	include/linux/watchdog.h
 F:	include/uapi/linux/watchdog.h
+F:	include/trace/events/watchdog.h

 WHISKEYCOVE PMIC GPIO DRIVER
 M:	Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
@ -22761,7 +22750,7 @@ S:	Maintained
 W:	http://mjpeg.sourceforge.net/driver-zoran/
 Q:	https://patchwork.linuxtv.org/project/linux-media/list/
 F:	Documentation/driver-api/media/drivers/zoran.rst
-F:	drivers/staging/media/zoran/
+F:	drivers/media/pci/zoran/

 ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
 M:	Minchan Kim <minchan@kernel.org>
--- a/4
+++ b/4
@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
 NAME = Hurr durr I'ma ninja sloth

 # *DOCUMENTATION*
@ -1218,7 +1218,7 @@ quiet_cmd_ar_vmlinux.a = AR      $@
      cmd_ar_vmlinux.a = \
 	rm -f $@; \
 	$(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \
-	$(AR) mPiT $$($(AR) t $@ | head -n1) $@ $$($(AR) t $@ | grep -F --file=$(srctree)/scripts/head-object-list.txt)
+	$(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)

 targets += vmlinux.a
 vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt autoksyms_recursive FORCE
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@ -103,11 +103,11 @@
 			dma-coherent;
 		};

-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};

-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};

--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@ -110,11 +110,11 @@
 			dma-coherent;
 		};

-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};

-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};

--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@ -87,13 +87,13 @@
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};

-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};

-		ohci@60000 {
+		usb@60000 {
 			compatible = "generic-ohci";
 			reg = < 0x60000 0x100 >;
 			interrupts = < 8 >;
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@ -234,7 +234,7 @@
 			};
 		};

-		ohci@60000 {
+		usb@60000 {
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
@ -242,7 +242,7 @@
 			dma-coherent;
 		};

-		ehci@40000 {
+		usb@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@ -46,7 +46,7 @@
 			clock-names = "stmmaceth";
 		};

-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@ -35,9 +35,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@ -99,7 +96,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@ -34,9 +34,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@ -97,7 +94,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@ -35,9 +35,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@ -100,7 +97,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
--- a/arch/arc/configs/haps_hs_defconfig
+++ b/arch/arc/configs/haps_hs_defconfig
@ -59,6 +59,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_PREEMPT is not set
--- a/arch/arc/configs/haps_hs_smp_defconfig
+++ b/arch/arc/configs/haps_hs_smp_defconfig
@ -59,6 +59,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DEBUG_PREEMPT is not set
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@ -85,7 +85,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@ -56,5 +56,4 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@ -65,4 +65,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@ -63,4 +63,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@ -26,9 +26,6 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@ -37,7 +34,6 @@ CONFIG_DEVTMPFS=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
 # CONFIG_NET_VENDOR_INTEL is not set
@ -74,5 +70,5 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FTRACE=y
+# CONFIG_NET_VENDOR_CADENCE is not set
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@ -35,15 +35,11 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
@ -94,12 +90,11 @@ CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@ -58,8 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_ARCPGU_RGB888=y
-CONFIG_ARCPGU_DISPTYPE=0
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
@ -87,7 +85,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@ -91,7 +91,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@ -82,7 +82,7 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
 /*
 * __fls: Similar to fls, but zero based (0-31)
 */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
 	if (!x)
 		return 0;
@ -131,7 +131,7 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
 /*
 * __fls: Similar to fls, but zero based (0-31). Also 0 if no bit set
 */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
 	/* FLS insn has exactly same semantics as the API */
 	return	__builtin_arc_fls(x);
--- a/arch/arc/include/asm/entry-compact.h
+++ b/arch/arc/include/asm/entry-compact.h
@ -21,7 +21,7 @@
 *      r25 contains the kernel current task ptr
 *  - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
 *  - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
- *      address Write back load ld.ab instead of seperate ld/add instn
+ *      address Write back load ld.ab instead of separate ld/add instn
 *
 * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
 */
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@ -32,7 +32,7 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }

-extern void iounmap(const void __iomem *addr);
+extern void iounmap(const volatile void __iomem *addr);

 /*
 * io{read,write}{16,32}be() macros
--- a/arch/arc/include/asm/pgtable-levels.h
+++ b/arch/arc/include/asm/pgtable-levels.h
@ -161,7 +161,7 @@
 #define pmd_pfn(pmd)		((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT)
 #define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
 #define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
-#define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))

 /*
 * 4th level paging: pte
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@ -385,7 +385,7 @@ irqreturn_t do_IPI(int irq, void *dev_id)
 * API called by platform code to hookup arch-common ISR to their IPI IRQ
 *
 * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map
- * function needs to call call irq_set_percpu_devid() for IPI IRQ, otherwise
+ * function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise
 * request_percpu_irq() below will fail
 */
 static DEFINE_PER_CPU(int, ipi_dev);
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@ -750,7 +750,7 @@ static inline void arc_slc_enable(void)
 *  -In SMP, if hardware caches are coherent
 *
 * There's a corollary case, where kernel READs from a userspace mapped page.
- * If the U-mapping is not congruent to to K-mapping, former needs flushing.
+ * If the U-mapping is not congruent to K-mapping, former needs flushing.
 */
 void flush_dcache_page(struct page *page)
 {
@ -910,7 +910,7 @@ EXPORT_SYMBOL(flush_icache_range);
 * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
 *    However in one instance, when called by kprobe (for a breakpt in
 *    builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
- *    use a paddr to index the cache (despite VIPT). This is fine since since a
+ *    use a paddr to index the cache (despite VIPT). This is fine since a
 *    builtin kernel page will not have any virtual mappings.
 *    kprobe on loadable module will be kernel vaddr.
 */
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@ -94,7 +94,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 EXPORT_SYMBOL(ioremap_prot);


-void iounmap(const void __iomem *addr)
+void iounmap(const volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
--- a/arch/arm/boot/dts/imx6q-yapp4-crux.dts
+++ b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
@ -33,6 +33,10 @@
 	status = "okay";
 };

+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@ -29,7 +29,7 @@

 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};

--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@ -26,7 +26,7 @@

 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};

--- a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
+++ b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
@ -33,6 +33,10 @@
 	status = "okay";
 };

+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@ -24,6 +24,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};

--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@ -28,6 +28,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};

--- a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
@ -44,6 +44,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};

--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@ -57,6 +57,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};

--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};

--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@ -35,6 +35,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};

--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};

--- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@ -34,6 +34,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};

--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};

--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@ -751,12 +751,26 @@
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
+			trips {
+				pmic_crit0: trip0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};

 		soc {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
+			trips {
+				soc_crit0: trip0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};

 		big_cluster_thermal_zone: big-cluster {
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@ -779,6 +779,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};

@ -788,6 +791,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};

--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@ -532,6 +532,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};

@ -541,6 +544,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};

--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@ -1385,6 +1385,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			little-endian;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};

@ -1395,6 +1398,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};

--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@ -38,9 +38,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
 	};
@ -49,9 +49,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
 		fsl,tuning-step = <2>;
@ -62,9 +62,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
 	};
--- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@ -250,21 +250,21 @@
 		/* SODIMM 96 */
 		MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4			0x1c4
 		/* CPLD_D[7] */
-		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x1c4
+		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x184
 		/* CPLD_D[6] */
-		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x1c4
+		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x184
 		/* CPLD_D[5] */
-		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x1c4
+		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x184
 		/* CPLD_D[4] */
-		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x184
 		/* CPLD_D[3] */
-		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x184
 		/* CPLD_D[2] */
-		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x184
 		/* CPLD_D[1] */
-		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x184
 		/* CPLD_D[0] */
-		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x184
 		/* KBD_intK */
 		MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27			0x1c4
 		/* DISP_reset */
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@ -276,6 +276,7 @@
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};

 	usbphynop2: usbphynop2 {
@ -285,6 +286,7 @@
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg2>;
 	};

 	soc: soc@0 {
@ -674,13 +676,11 @@
 					pgc_otg1: power-domain@2 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};

 					pgc_otg2: power-domain@3 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
-						power-domains = <&pgc_hsiomix>;
 					};

 					pgc_gpumix: power-domain@4 {
@ -1186,7 +1186,7 @@
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};

@ -1206,7 +1206,7 @@
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
-				power-domains = <&pgc_otg2>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};

--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@ -662,7 +662,6 @@
 					pgc_otg1: power-domain@1 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};

 					pgc_gpumix: power-domain@2 {
@ -1076,7 +1075,7 @@
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};

@ -1175,5 +1174,6 @@
 		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 };
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@ -354,16 +354,6 @@
 			  "SODIMM_82",
 			  "SODIMM_70",
 			  "SODIMM_72";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };

 &gpio3 {
@ -432,6 +422,16 @@
 			  "SODIMM_256",
 			  "SODIMM_48",
 			  "SODIMM_44";
+
+	ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
 };

 /* On-module I2C */
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@ -451,7 +451,7 @@
 			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
 				 <&clk IMX93_CLK_GPIO2_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 32 32>;
+			gpio-ranges = <&iomuxc 0 4 30>;
 		};

 		gpio3: gpio@43820080 {
@ -465,7 +465,8 @@
 			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
 				 <&clk IMX93_CLK_GPIO3_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 64 32>;
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
 		};

 		gpio4: gpio@43830080 {
@ -479,7 +480,7 @@
 			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
 				 <&clk IMX93_CLK_GPIO4_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 96 32>;
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
 		};

 		gpio1: gpio@47400080 {
@ -493,7 +494,7 @@
 			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
 				 <&clk IMX93_CLK_GPIO1_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 0 32>;
+			gpio-ranges = <&iomuxc 0 92 16>;
 		};

 		s4muap: mailbox@47520000 {
@ -501,7 +502,7 @@
 			reg = <0x47520000 0x10000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "txirq", "rxirq";
+			interrupt-names = "tx", "rx";
 			#mbox-cells = <2>;
 		};

--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@ -14,8 +14,16 @@

 #ifdef CONFIG_EFI
 extern void efi_init(void);
+
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg);
 #else
 #define efi_init()
+
+static inline
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
+{
+	return false;
+}
 #endif

 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
--- a/arch/arm64/include/asm/kvm_pgtable.h
+++ b/arch/arm64/include/asm/kvm_pgtable.h
@ -13,6 +13,18 @@

 #define KVM_PGTABLE_MAX_LEVELS		4U

+/*
+ * The largest supported block sizes for KVM (no 52-bit PA support):
+ *  - 4K (level 1):	1GB
+ *  - 16K (level 2):	32MB
+ *  - 64K (level 2):	512MB
+ */
+#ifdef CONFIG_ARM64_4K_PAGES
+#define KVM_PGTABLE_MIN_BLOCK_LEVEL	1U
+#else
+#define KVM_PGTABLE_MIN_BLOCK_LEVEL	2U
+#endif
+
 static inline u64 kvm_get_parange(u64 mmfr0)
 {
 	u64 parange = cpuid_feature_extract_unsigned_field(mmfr0,
@ -58,11 +70,7 @@ static inline u64 kvm_granule_size(u32 level)

 static inline bool kvm_level_supports_block_mapping(u32 level)
 {
-	/*
-	 * Reject invalid block mappings and don't bother with 4TB mappings for
-	 * 52-bit PAs.
-	 */
-	return !(level == 0 || (PAGE_SIZE != SZ_4K && level == 1));
+	return level >= KVM_PGTABLE_MIN_BLOCK_LEVEL;
 }

 /**
--- a/arch/arm64/include/asm/stage2_pgtable.h
+++ b/arch/arm64/include/asm/stage2_pgtable.h
@ -10,13 +10,6 @@

 #include <linux/pgtable.h>

-/*
- * PGDIR_SHIFT determines the size a top-level page table entry can map
- * and depends on the number of levels in the page table. Compute the
- * PGDIR_SHIFT for a given number of levels.
- */
-#define pt_levels_pgdir_shift(lvls)	ARM64_HW_PGTABLE_LEVEL_SHIFT(4 - (lvls))
-
 /*
 * The hardware supports concatenation of up to 16 tables at stage2 entry
 * level and we use the feature whenever possible, which means we resolve 4
@ -30,11 +23,6 @@
 #define stage2_pgtable_levels(ipa)	ARM64_HW_PGTABLE_LEVELS((ipa) - 4)
 #define kvm_stage2_levels(kvm)		VTCR_EL2_LVLS(kvm->arch.vtcr)

-/* stage2_pgdir_shift() is the size mapped by top-level stage2 entry for the VM */
-#define stage2_pgdir_shift(kvm)		pt_levels_pgdir_shift(kvm_stage2_levels(kvm))
-#define stage2_pgdir_size(kvm)		(1ULL << stage2_pgdir_shift(kvm))
-#define stage2_pgdir_mask(kvm)		~(stage2_pgdir_size(kvm) - 1)
-
 /*
 * kvm_mmmu_cache_min_pages() is the number of pages required to install
 * a stage-2 translation. We pre-allocate the entry level page table at
@ -42,12 +30,4 @@
 */
 #define kvm_mmu_cache_min_pages(kvm)	(kvm_stage2_levels(kvm) - 1)

-static inline phys_addr_t
-stage2_pgd_addr_end(struct kvm *kvm, phys_addr_t addr, phys_addr_t end)
-{
-	phys_addr_t boundary = (addr + stage2_pgdir_size(kvm)) & stage2_pgdir_mask(kvm);
-
-	return (boundary - 1 < end - 1) ? boundary : end;
-}
-
 #endif	/* __ARM64_S2_PGTABLE_H_ */
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@ -428,6 +428,30 @@ static const struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
 	ARM64_FTR_END,
 };

+static const struct arm64_ftr_bits ftr_mvfr0[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPROUND_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPSHVEC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPSQRT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPDIVIDE_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPTRAP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPDP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPSP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_SIMD_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_mvfr1[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDFMAC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_FPHP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDHP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDSP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDINT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDLS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_FPDNAN_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_FPFTZ_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
 static const struct arm64_ftr_bits ftr_mvfr2[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_FPMISC_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_SIMDMISC_SHIFT, 4, 0),
@ -458,10 +482,10 @@ static const struct arm64_ftr_bits ftr_id_isar0[] = {

 static const struct arm64_ftr_bits ftr_id_isar5[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_RDM_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_CRC32_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SHA2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SHA1_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_AES_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_CRC32_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SHA2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SHA1_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_AES_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SEVL_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
@ -574,7 +598,7 @@ static const struct arm64_ftr_bits ftr_smcr[] = {
 * Common ftr bits for a 32bit register with all hidden, strict
 * attributes, with 4bit feature fields and a default safe value of
 * 0. Covers the following 32bit registers:
- * id_isar[1-4], id_mmfr[1-3], id_pfr1, mvfr[0-1]
+ * id_isar[1-3], id_mmfr[1-3]
 */
 static const struct arm64_ftr_bits ftr_generic_32bits[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
@ -645,8 +669,8 @@ static const struct __ftr_reg_entry {
 	ARM64_FTR_REG(SYS_ID_ISAR6_EL1, ftr_id_isar6),

 	/* Op1 = 0, CRn = 0, CRm = 3 */
-	ARM64_FTR_REG(SYS_MVFR0_EL1, ftr_generic_32bits),
-	ARM64_FTR_REG(SYS_MVFR1_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_MVFR0_EL1, ftr_mvfr0),
+	ARM64_FTR_REG(SYS_MVFR1_EL1, ftr_mvfr1),
 	ARM64_FTR_REG(SYS_MVFR2_EL1, ftr_mvfr2),
 	ARM64_FTR_REG(SYS_ID_PFR2_EL1, ftr_id_pfr2),
 	ARM64_FTR_REG(SYS_ID_DFR1_EL1, ftr_id_dfr1),
@ -3339,7 +3363,7 @@ static void __maybe_unused cpu_enable_cnp(struct arm64_cpu_capabilities const *c

 /*
 * We emulate only the following system register space.
- * Op0 = 0x3, CRn = 0x0, Op1 = 0x0, CRm = [0, 4 - 7]
+ * Op0 = 0x3, CRn = 0x0, Op1 = 0x0, CRm = [0, 2 - 7]
 * See Table C5-6 System instruction encodings for System register accesses,
 * ARMv8 ARM(ARM DDI 0487A.f) for more details.
 */
@ -3349,7 +3373,7 @@ static inline bool __attribute_const__ is_emulated(u32 id)
 		sys_reg_CRn(id) == 0x0 &&
 		sys_reg_Op1(id) == 0x0 &&
 		(sys_reg_CRm(id) == 0 ||
-		 ((sys_reg_CRm(id) >= 4) && (sys_reg_CRm(id) <= 7))));
+		 ((sys_reg_CRm(id) >= 2) && (sys_reg_CRm(id) <= 7))));
 }

 /*
--- a/arch/arm64/kernel/efi-rt-wrapper.S
+++ b/arch/arm64/kernel/efi-rt-wrapper.S
@ -6,7 +6,7 @@
 #include <linux/linkage.h>

 SYM_FUNC_START(__efi_rt_asm_wrapper)
-	stp	x29, x30, [sp, #-32]!
+	stp	x29, x30, [sp, #-112]!
 	mov	x29, sp

 	/*
@ -16,6 +16,20 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	 */
 	stp	x1, x18, [sp, #16]

+	/*
+	 * Preserve all callee saved registers and record the stack pointer
+	 * value in a per-CPU variable so we can recover from synchronous
+	 * exceptions occurring while running the firmware routines.
+	 */
+	stp	x19, x20, [sp, #32]
+	stp	x21, x22, [sp, #48]
+	stp	x23, x24, [sp, #64]
+	stp	x25, x26, [sp, #80]
+	stp	x27, x28, [sp, #96]
+
+	adr_this_cpu	x8, __efi_rt_asm_recover_sp, x9
+	str		x29, [x8]
+
 	/*
 	 * We are lucky enough that no EFI runtime services take more than
 	 * 5 arguments, so all are passed in registers rather than via the
@ -31,7 +45,7 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)

 	ldp	x1, x2, [sp, #16]
 	cmp	x2, x18
-	ldp	x29, x30, [sp], #32
+	ldp	x29, x30, [sp], #112
 	b.ne	0f
 	ret
 0:
@ -45,3 +59,18 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	mov	x18, x2
 	b	efi_handle_corrupted_x18	// tail call
 SYM_FUNC_END(__efi_rt_asm_wrapper)
+
+SYM_FUNC_START(__efi_rt_asm_recover)
+	ldr_this_cpu	x8, __efi_rt_asm_recover_sp, x9
+	mov		sp, x8
+
+	ldp	x0,  x18, [sp, #16]
+	ldp	x19, x20, [sp, #32]
+	ldp	x21, x22, [sp, #48]
+	ldp	x23, x24, [sp, #64]
+	ldp	x25, x26, [sp, #80]
+	ldp	x27, x28, [sp, #96]
+	ldp	x29, x30, [sp], #112
+
+	b	efi_handle_runtime_exception
+SYM_FUNC_END(__efi_rt_asm_recover)
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
@ -9,6 +9,7 @@

 #include <linux/efi.h>
 #include <linux/init.h>
+#include <linux/percpu.h>

 #include <asm/efi.h>

@ -128,3 +129,28 @@ asmlinkage efi_status_t efi_handle_corrupted_x18(efi_status_t s, const char *f)
 	pr_err_ratelimited(FW_BUG "register x18 corrupted by EFI %s\n", f);
 	return s;
 }
+
+asmlinkage DEFINE_PER_CPU(u64, __efi_rt_asm_recover_sp);
+
+asmlinkage efi_status_t __efi_rt_asm_recover(void);
+
+asmlinkage efi_status_t efi_handle_runtime_exception(const char *f)
+{
+	pr_err(FW_BUG "Synchronous exception occurred in EFI runtime service %s()\n", f);
+	clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+	return EFI_ABORTED;
+}
+
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
+{
+	 /* Check whether the exception occurred while running the firmware */
+	if (current_work() != &efi_rts_work.work || regs->pc >= TASK_SIZE_64)
+		return false;
+
+	pr_err(FW_BUG "Unable to handle %s in EFI runtime service\n", msg);
+	add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
+	dump_stack();
+
+	regs->pc = (u64)__efi_rt_asm_recover;
+	return true;
+}
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@ -329,7 +329,8 @@ static void cortex_a76_erratum_1463225_svc_handler(void)
 	__this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 0);
 }

-static bool cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
+static __always_inline bool
+cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
 {
 	if (!__this_cpu_read(__in_cortex_a76_erratum_1463225_wa))
 		return false;
--- a/arch/arm64/kernel/entry-ftrace.S
+++ b/arch/arm64/kernel/entry-ftrace.S
@ -7,6 +7,7 @@
 */

 #include <linux/linkage.h>
+#include <linux/cfi_types.h>
 #include <asm/asm-offsets.h>
 #include <asm/assembler.h>
 #include <asm/ftrace.h>
@ -294,10 +295,14 @@ SYM_FUNC_END(ftrace_graph_caller)
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */

-SYM_FUNC_START(ftrace_stub)
+SYM_TYPED_FUNC_START(ftrace_stub)
 	ret
 SYM_FUNC_END(ftrace_stub)

+SYM_TYPED_FUNC_START(ftrace_stub_graph)
+	ret
+SYM_FUNC_END(ftrace_stub_graph)
+
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 /*
 * void return_to_handler(void)
--- a/arch/arm64/kvm/hyp/Makefile
+++ b/arch/arm64/kvm/hyp/Makefile
@ -5,9 +5,6 @@

 incdir := $(srctree)/$(src)/include
 subdir-asflags-y := -I$(incdir)
-subdir-ccflags-y := -I$(incdir)				\
-		    -fno-stack-protector		\
-		    -DDISABLE_BRANCH_PROFILING		\
-		    $(DISABLE_STACKLEAK_PLUGIN)
+subdir-ccflags-y := -I$(incdir)

 obj-$(CONFIG_KVM) += vhe/ nvhe/ pgtable.o
--- a/arch/arm64/kvm/hyp/exception.c
+++ b/arch/arm64/kvm/hyp/exception.c
@ -13,6 +13,7 @@
 #include <hyp/adjust_pc.h>
 #include <linux/kvm_host.h>
 #include <asm/kvm_emulate.h>
+#include <asm/kvm_mmu.h>

 #if !defined (__KVM_NVHE_HYPERVISOR__) && !defined (__KVM_VHE_HYPERVISOR__)
 #error Hypervisor code only!
@ -115,7 +116,7 @@ static void enter_exception64(struct kvm_vcpu *vcpu, unsigned long target_mode,
 	new |= (old & PSR_C_BIT);
 	new |= (old & PSR_V_BIT);

-	if (kvm_has_mte(vcpu->kvm))
+	if (kvm_has_mte(kern_hyp_va(vcpu->kvm)))
 		new |= PSR_TCO_BIT;

 	new |= (old & PSR_DIT_BIT);
--- a/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@ -87,6 +87,17 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu)

 	vcpu->arch.mdcr_el2_host = read_sysreg(mdcr_el2);
 	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
+
+	if (cpus_have_final_cap(ARM64_SME)) {
+		sysreg_clear_set_s(SYS_HFGRTR_EL2,
+				   HFGxTR_EL2_nSMPRI_EL1_MASK |
+				   HFGxTR_EL2_nTPIDR2_EL0_MASK,
+				   0);
+		sysreg_clear_set_s(SYS_HFGWTR_EL2,
+				   HFGxTR_EL2_nSMPRI_EL1_MASK |
+				   HFGxTR_EL2_nTPIDR2_EL0_MASK,
+				   0);
+	}
 }

 static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
@ -96,6 +107,15 @@ static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
 	write_sysreg(0, hstr_el2);
 	if (kvm_arm_support_pmu_v3())
 		write_sysreg(0, pmuserenr_el0);
+
+	if (cpus_have_final_cap(ARM64_SME)) {
+		sysreg_clear_set_s(SYS_HFGRTR_EL2, 0,
+				   HFGxTR_EL2_nSMPRI_EL1_MASK |
+				   HFGxTR_EL2_nTPIDR2_EL0_MASK);
+		sysreg_clear_set_s(SYS_HFGWTR_EL2, 0,
+				   HFGxTR_EL2_nSMPRI_EL1_MASK |
+				   HFGxTR_EL2_nTPIDR2_EL0_MASK);
+	}
 }

 static inline void ___activate_traps(struct kvm_vcpu *vcpu)
--- a/arch/arm64/kvm/hyp/nvhe/Makefile
+++ b/arch/arm64/kvm/hyp/nvhe/Makefile
@ -10,6 +10,9 @@ asflags-y := -D__KVM_NVHE_HYPERVISOR__ -D__DISABLE_EXPORTS
 # will explode instantly (Words of Marc Zyngier). So introduce a generic flag
 # __DISABLE_TRACE_MMIO__ to disable MMIO tracing for nVHE KVM.
 ccflags-y := -D__KVM_NVHE_HYPERVISOR__ -D__DISABLE_EXPORTS -D__DISABLE_TRACE_MMIO__
+ccflags-y += -fno-stack-protector	\
+	     -DDISABLE_BRANCH_PROFILING	\
+	     $(DISABLE_STACKLEAK_PLUGIN)

 hostprogs := gen-hyprel
 HOST_EXTRACFLAGS += -I$(objtree)/include
@ -89,6 +92,10 @@ quiet_cmd_hypcopy = HYPCOPY $@
 # Remove ftrace, Shadow Call Stack, and CFI CFLAGS.
 # This is equivalent to the 'notrace', '__noscs', and '__nocfi' annotations.
 KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS) $(CC_FLAGS_CFI), $(KBUILD_CFLAGS))
+# Starting from 13.0.0 llvm emits SHT_REL section '.llvm.call-graph-profile'
+# when profile optimization is applied. gen-hyprel does not support SHT_REL and
+# causes a build failure. Remove profile optimization flags.
+KBUILD_CFLAGS := $(filter-out -fprofile-sample-use=% -fprofile-use=%, $(KBUILD_CFLAGS))

 # KVM nVHE code is run at a different exception code with a different map, so
 # compiler instrumentation that inserts callbacks or checks into the code may
--- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c
+++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
@ -516,7 +516,7 @@ static enum pkvm_page_state hyp_get_page_state(kvm_pte_t pte)
 	if (!kvm_pte_valid(pte))
 		return PKVM_NOPAGE;

-	return pkvm_getstate(kvm_pgtable_stage2_pte_prot(pte));
+	return pkvm_getstate(kvm_pgtable_hyp_pte_prot(pte));
 }

 static int __hyp_check_page_state_range(u64 addr, u64 size,
--- a/arch/arm64/kvm/hyp/nvhe/switch.c
+++ b/arch/arm64/kvm/hyp/nvhe/switch.c
@ -55,18 +55,6 @@ static void __activate_traps(struct kvm_vcpu *vcpu)
 	write_sysreg(val, cptr_el2);
 	write_sysreg(__this_cpu_read(kvm_hyp_vector), vbar_el2);

-	if (cpus_have_final_cap(ARM64_SME)) {
-		val = read_sysreg_s(SYS_HFGRTR_EL2);
-		val &= ~(HFGxTR_EL2_nTPIDR2_EL0_MASK |
-			 HFGxTR_EL2_nSMPRI_EL1_MASK);
-		write_sysreg_s(val, SYS_HFGRTR_EL2);
-
-		val = read_sysreg_s(SYS_HFGWTR_EL2);
-		val &= ~(HFGxTR_EL2_nTPIDR2_EL0_MASK |
-			 HFGxTR_EL2_nSMPRI_EL1_MASK);
-		write_sysreg_s(val, SYS_HFGWTR_EL2);
-	}
-
 	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
 		struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt;

@ -110,20 +98,6 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)

 	write_sysreg(this_cpu_ptr(&kvm_init_params)->hcr_el2, hcr_el2);

-	if (cpus_have_final_cap(ARM64_SME)) {
-		u64 val;
-
-		val = read_sysreg_s(SYS_HFGRTR_EL2);
-		val |= HFGxTR_EL2_nTPIDR2_EL0_MASK |
-			HFGxTR_EL2_nSMPRI_EL1_MASK;
-		write_sysreg_s(val, SYS_HFGRTR_EL2);
-
-		val = read_sysreg_s(SYS_HFGWTR_EL2);
-		val |= HFGxTR_EL2_nTPIDR2_EL0_MASK |
-			HFGxTR_EL2_nSMPRI_EL1_MASK;
-		write_sysreg_s(val, SYS_HFGWTR_EL2);
-	}
-
 	cptr = CPTR_EL2_DEFAULT;
 	if (vcpu_has_sve(vcpu) && (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED))
 		cptr |= CPTR_EL2_TZ;
--- a/arch/arm64/kvm/hyp/vhe/switch.c
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@ -63,10 +63,6 @@ static void __activate_traps(struct kvm_vcpu *vcpu)
 		__activate_traps_fpsimd32(vcpu);
 	}

-	if (cpus_have_final_cap(ARM64_SME))
-		write_sysreg(read_sysreg(sctlr_el2) & ~SCTLR_ELx_ENTP2,
-			     sctlr_el2);
-
 	write_sysreg(val, cpacr_el1);

 	write_sysreg(__this_cpu_read(kvm_hyp_vector), vbar_el1);
@ -88,10 +84,6 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 	 */
 	asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_SPECULATIVE_AT));

-	if (cpus_have_final_cap(ARM64_SME))
-		write_sysreg(read_sysreg(sctlr_el2) | SCTLR_ELx_ENTP2,
-			     sctlr_el2);
-
 	write_sysreg(CPACR_EL1_DEFAULT, cpacr_el1);

 	if (!arm64_kernel_unmapped_at_el0())
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@ -31,6 +31,13 @@ static phys_addr_t hyp_idmap_vector;

 static unsigned long io_map_base;

+static phys_addr_t stage2_range_addr_end(phys_addr_t addr, phys_addr_t end)
+{
+	phys_addr_t size = kvm_granule_size(KVM_PGTABLE_MIN_BLOCK_LEVEL);
+	phys_addr_t boundary = ALIGN_DOWN(addr + size, size);
+
+	return (boundary - 1 < end - 1) ? boundary : end;
+}

 /*
 * Release kvm_mmu_lock periodically if the memory region is large. Otherwise,
@ -52,7 +59,7 @@ static int stage2_apply_range(struct kvm *kvm, phys_addr_t addr,
 		if (!pgt)
 			return -EINVAL;

-		next = stage2_pgd_addr_end(kvm, addr, end);
+		next = stage2_range_addr_end(addr, end);
 		ret = fn(pgt, addr, next - addr);
 		if (ret)
 			break;
--- a/arch/arm64/kvm/vgic/vgic-its.c
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@ -2149,7 +2149,7 @@ static int scan_its_table(struct vgic_its *its, gpa_t base, int size, u32 esz,

 	memset(entry, 0, esz);

-	while (len > 0) {
+	while (true) {
 		int next_offset;
 		size_t byte_offset;

@ -2162,6 +2162,9 @@ static int scan_its_table(struct vgic_its *its, gpa_t base, int size, u32 esz,
 			return next_offset;

 		byte_offset = next_offset * esz;
+		if (byte_offset >= len)
+			break;
+
 		id += next_offset;
 		gpa += byte_offset;
 		len -= byte_offset;
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@ -30,6 +30,7 @@
 #include <asm/bug.h>
 #include <asm/cmpxchg.h>
 #include <asm/cpufeature.h>
+#include <asm/efi.h>
 #include <asm/exception.h>
 #include <asm/daifflags.h>
 #include <asm/debug-monitors.h>
@ -391,6 +392,9 @@ static void __do_kernel_fault(unsigned long addr, unsigned long esr,
 		msg = "paging request";
 	}

+	if (efi_runtime_fixup_exception(regs, msg))
+		return;
+
 	die_kernel_fault(msg, addr, esr, regs);
 }

--- a/arch/loongarch/include/asm/processor.h
+++ b/arch/loongarch/include/asm/processor.h
@ -191,7 +191,7 @@ static inline void flush_thread(void)
 unsigned long __get_wchan(struct task_struct *p);

 #define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + \
-			 THREAD_SIZE - 32 - sizeof(struct pt_regs))
+			 THREAD_SIZE - sizeof(struct pt_regs))
 #define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk))
 #define KSTK_EIP(tsk) (task_pt_regs(tsk)->csr_era)
 #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[3])
--- a/Show More
+++ b/Show More