mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-28 14:44:10 +08:00
mmc: host: sdhci-pci: Add Genesys Logic GL975x support
Add support for the GL9750 and GL9755 chipsets. Enable v4 mode and wait 5ms after set 1.8V signal enable for GL9750/ GL9755. Fix the value of SDHCI_MAX_CURRENT register and use the vendor tuning flow for GL9750. Co-developed-by: Michael K Johnson <johnsonm@danlj.org> Signed-off-by: Michael K Johnson <johnsonm@danlj.org> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Ben Chuang
Ulf Hansson
parent
b960bc448a
commit
e51df6ce66
@ -94,6 +94,7 @@ config MMC_SDHCI_PCI
|
||||
depends on MMC_SDHCI && PCI
|
||||
select MMC_CQHCI
|
||||
select IOSF_MBI if X86
|
||||
select MMC_SDHCI_IO_ACCESSORS
|
||||
help
|
||||
This selects the PCI Secure Digital Host Controller Interface.
|
||||
Most controllers found today are PCI devices.
|
||||
|
||||
@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
|
||||
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
|
||||
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
|
||||
sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
|
||||
sdhci-pci-dwc-mshc.o
|
||||
sdhci-pci-dwc-mshc.o sdhci-pci-gli.o
|
||||
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
|
||||
obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
|
||||
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
|
||||
|
||||
@ -1685,6 +1685,8 @@ static const struct pci_device_id pci_ids[] = {
|
||||
SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
|
||||
SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
|
||||
SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
|
||||
SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
|
||||
SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
|
||||
SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
|
||||
/* Generic SD host controller */
|
||||
{PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
|
||||
|
||||
352
drivers/mmc/host/sdhci-pci-gli.c
Normal file
352
drivers/mmc/host/sdhci-pci-gli.c
Normal file
@ -0,0 +1,352 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2019 Genesys Logic, Inc.
|
||||
*
|
||||
* Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
|
||||
*
|
||||
* Version: v0.9.0 (2019-08-08)
|
||||
*/
|
||||
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/bits.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/mmc/mmc.h>
|
||||
#include <linux/delay.h>
|
||||
#include "sdhci.h"
|
||||
#include "sdhci-pci.h"
|
||||
|
||||
/* Genesys Logic extra registers */
|
||||
#define SDHCI_GLI_9750_WT 0x800
|
||||
#define SDHCI_GLI_9750_WT_EN BIT(0)
|
||||
#define GLI_9750_WT_EN_ON 0x1
|
||||
#define GLI_9750_WT_EN_OFF 0x0
|
||||
|
||||
#define SDHCI_GLI_9750_DRIVING 0x860
|
||||
#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0)
|
||||
#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26)
|
||||
#define GLI_9750_DRIVING_1_VALUE 0xFFF
|
||||
#define GLI_9750_DRIVING_2_VALUE 0x3
|
||||
|
||||
#define SDHCI_GLI_9750_PLL 0x864
|
||||
#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23)
|
||||
#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20)
|
||||
#define GLI_9750_PLL_TX2_INV_VALUE 0x1
|
||||
#define GLI_9750_PLL_TX2_DLY_VALUE 0x0
|
||||
|
||||
#define SDHCI_GLI_9750_SW_CTRL 0x874
|
||||
#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6)
|
||||
#define GLI_9750_SW_CTRL_4_VALUE 0x3
|
||||
|
||||
#define SDHCI_GLI_9750_MISC 0x878
|
||||
#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2)
|
||||
#define SDHCI_GLI_9750_MISC_RX_INV BIT(3)
|
||||
#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4)
|
||||
#define GLI_9750_MISC_TX1_INV_VALUE 0x0
|
||||
#define GLI_9750_MISC_RX_INV_ON 0x1
|
||||
#define GLI_9750_MISC_RX_INV_OFF 0x0
|
||||
#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF
|
||||
#define GLI_9750_MISC_TX1_DLY_VALUE 0x5
|
||||
|
||||
#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
|
||||
#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4)
|
||||
#define GLI_9750_TUNING_CONTROL_EN_ON 0x1
|
||||
#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0
|
||||
#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16)
|
||||
#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19)
|
||||
#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1
|
||||
#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2
|
||||
|
||||
#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
|
||||
#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0)
|
||||
#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1
|
||||
|
||||
#define GLI_MAX_TUNING_LOOP 40
|
||||
|
||||
/* Genesys Logic chipset */
|
||||
static inline void gl9750_wt_on(struct sdhci_host *host)
|
||||
{
|
||||
u32 wt_value;
|
||||
u32 wt_enable;
|
||||
|
||||
wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
|
||||
wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
|
||||
|
||||
if (wt_enable == GLI_9750_WT_EN_ON)
|
||||
return;
|
||||
|
||||
wt_value &= ~SDHCI_GLI_9750_WT_EN;
|
||||
wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON);
|
||||
|
||||
sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
|
||||
}
|
||||
|
||||
static inline void gl9750_wt_off(struct sdhci_host *host)
|
||||
{
|
||||
u32 wt_value;
|
||||
u32 wt_enable;
|
||||
|
||||
wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
|
||||
wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
|
||||
|
||||
if (wt_enable == GLI_9750_WT_EN_OFF)
|
||||
return;
|
||||
|
||||
wt_value &= ~SDHCI_GLI_9750_WT_EN;
|
||||
wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF);
|
||||
|
||||
sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
|
||||
}
|
||||
|
||||
static void gli_set_9750(struct sdhci_host *host)
|
||||
{
|
||||
u32 driving_value;
|
||||
u32 pll_value;
|
||||
u32 sw_ctrl_value;
|
||||
u32 misc_value;
|
||||
u32 parameter_value;
|
||||
u32 control_value;
|
||||
u16 ctrl2;
|
||||
|
||||
gl9750_wt_on(host);
|
||||
|
||||
driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
|
||||
pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
|
||||
sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
|
||||
misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
|
||||
parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
|
||||
control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
|
||||
|
||||
driving_value &= ~(SDHCI_GLI_9750_DRIVING_1);
|
||||
driving_value &= ~(SDHCI_GLI_9750_DRIVING_2);
|
||||
driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1,
|
||||
GLI_9750_DRIVING_1_VALUE);
|
||||
driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2,
|
||||
GLI_9750_DRIVING_2_VALUE);
|
||||
sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
|
||||
|
||||
sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4;
|
||||
sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4,
|
||||
GLI_9750_SW_CTRL_4_VALUE);
|
||||
sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
|
||||
|
||||
/* reset the tuning flow after reinit and before starting tuning */
|
||||
pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV;
|
||||
pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY;
|
||||
pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV,
|
||||
GLI_9750_PLL_TX2_INV_VALUE);
|
||||
pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY,
|
||||
GLI_9750_PLL_TX2_DLY_VALUE);
|
||||
|
||||
misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV;
|
||||
misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
|
||||
misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY;
|
||||
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV,
|
||||
GLI_9750_MISC_TX1_INV_VALUE);
|
||||
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
|
||||
GLI_9750_MISC_RX_INV_VALUE);
|
||||
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY,
|
||||
GLI_9750_MISC_TX1_DLY_VALUE);
|
||||
|
||||
parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY;
|
||||
parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY,
|
||||
GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE);
|
||||
|
||||
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1;
|
||||
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2;
|
||||
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1,
|
||||
GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE);
|
||||
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2,
|
||||
GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE);
|
||||
|
||||
sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
|
||||
sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
|
||||
|
||||
/* disable tuned clk */
|
||||
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
||||
ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
|
||||
sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
|
||||
|
||||
/* enable tuning parameters control */
|
||||
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
|
||||
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
|
||||
GLI_9750_TUNING_CONTROL_EN_ON);
|
||||
sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
|
||||
|
||||
/* write tuning parameters */
|
||||
sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
|
||||
|
||||
/* disable tuning parameters control */
|
||||
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
|
||||
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
|
||||
GLI_9750_TUNING_CONTROL_EN_OFF);
|
||||
sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
|
||||
|
||||
/* clear tuned clk */
|
||||
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
||||
ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
|
||||
sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
|
||||
|
||||
gl9750_wt_off(host);
|
||||
}
|
||||
|
||||
static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
|
||||
{
|
||||
u32 misc_value;
|
||||
|
||||
gl9750_wt_on(host);
|
||||
|
||||
misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
|
||||
misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
|
||||
if (b) {
|
||||
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
|
||||
GLI_9750_MISC_RX_INV_ON);
|
||||
} else {
|
||||
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
|
||||
GLI_9750_MISC_RX_INV_OFF);
|
||||
}
|
||||
sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
|
||||
|
||||
gl9750_wt_off(host);
|
||||
}
|
||||
|
||||
static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
|
||||
{
|
||||
int i;
|
||||
int rx_inv;
|
||||
|
||||
for (rx_inv = 0; rx_inv < 2; rx_inv++) {
|
||||
gli_set_9750_rx_inv(host, !!rx_inv);
|
||||
sdhci_start_tuning(host);
|
||||
|
||||
for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
|
||||
u16 ctrl;
|
||||
|
||||
sdhci_send_tuning(host, opcode);
|
||||
|
||||
if (!host->tuning_done) {
|
||||
sdhci_abort_tuning(host, opcode);
|
||||
break;
|
||||
}
|
||||
|
||||
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
||||
if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
|
||||
if (ctrl & SDHCI_CTRL_TUNED_CLK)
|
||||
return 0; /* Success! */
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
if (!host->tuning_done) {
|
||||
pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
|
||||
mmc_hostname(host->mmc));
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
|
||||
mmc_hostname(host->mmc));
|
||||
sdhci_reset_tuning(host);
|
||||
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
|
||||
{
|
||||
host->mmc->retune_period = 0;
|
||||
if (host->tuning_mode == SDHCI_TUNING_MODE_1)
|
||||
host->mmc->retune_period = host->tuning_count;
|
||||
|
||||
gli_set_9750(host);
|
||||
host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
|
||||
sdhci_end_tuning(host);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
|
||||
{
|
||||
struct sdhci_host *host = slot->host;
|
||||
|
||||
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
|
||||
sdhci_enable_v4_mode(host);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
|
||||
{
|
||||
struct sdhci_host *host = slot->host;
|
||||
|
||||
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
|
||||
sdhci_enable_v4_mode(host);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sdhci_gli_voltage_switch(struct sdhci_host *host)
|
||||
{
|
||||
/*
|
||||
* According to Section 3.6.1 signal voltage switch procedure in
|
||||
* SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
|
||||
* follows:
|
||||
* (6) Set 1.8V Signal Enable in the Host Control 2 register.
|
||||
* (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
|
||||
* period.
|
||||
* (8) If 1.8V Signal Enable is cleared by Host Controller, go to
|
||||
* step (12).
|
||||
*
|
||||
* Wait 5ms after set 1.8V signal enable in Host Control 2 register
|
||||
* to ensure 1.8V signal enable bit is set by GL9750/GL9755.
|
||||
*/
|
||||
usleep_range(5000, 5500);
|
||||
}
|
||||
|
||||
static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
|
||||
{
|
||||
sdhci_reset(host, mask);
|
||||
gli_set_9750(host);
|
||||
}
|
||||
|
||||
static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
|
||||
{
|
||||
u32 value;
|
||||
|
||||
value = readl(host->ioaddr + reg);
|
||||
if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff)))
|
||||
value |= 0xc8;
|
||||
|
||||
return value;
|
||||
}
|
||||
|
||||
static const struct sdhci_ops sdhci_gl9755_ops = {
|
||||
.set_clock = sdhci_set_clock,
|
||||
.enable_dma = sdhci_pci_enable_dma,
|
||||
.set_bus_width = sdhci_set_bus_width,
|
||||
.reset = sdhci_reset,
|
||||
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
||||
.voltage_switch = sdhci_gli_voltage_switch,
|
||||
};
|
||||
|
||||
const struct sdhci_pci_fixes sdhci_gl9755 = {
|
||||
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
||||
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
|
||||
.probe_slot = gli_probe_slot_gl9755,
|
||||
.ops = &sdhci_gl9755_ops,
|
||||
};
|
||||
|
||||
static const struct sdhci_ops sdhci_gl9750_ops = {
|
||||
.read_l = sdhci_gl9750_readl,
|
||||
.set_clock = sdhci_set_clock,
|
||||
.enable_dma = sdhci_pci_enable_dma,
|
||||
.set_bus_width = sdhci_set_bus_width,
|
||||
.reset = sdhci_gl9750_reset,
|
||||
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
||||
.voltage_switch = sdhci_gli_voltage_switch,
|
||||
.platform_execute_tuning = gl9750_execute_tuning,
|
||||
};
|
||||
|
||||
const struct sdhci_pci_fixes sdhci_gl9750 = {
|
||||
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
||||
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
|
||||
.probe_slot = gli_probe_slot_gl9750,
|
||||
.ops = &sdhci_gl9750_ops,
|
||||
};
|
||||
@ -68,6 +68,9 @@
|
||||
|
||||
#define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
|
||||
|
||||
#define PCI_DEVICE_ID_GLI_9755 0x9755
|
||||
#define PCI_DEVICE_ID_GLI_9750 0x9750
|
||||
|
||||
/*
|
||||
* PCI device class and mask
|
||||
*/
|
||||
@ -188,5 +191,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host);
|
||||
extern const struct sdhci_pci_fixes sdhci_arasan;
|
||||
extern const struct sdhci_pci_fixes sdhci_snps;
|
||||
extern const struct sdhci_pci_fixes sdhci_o2;
|
||||
extern const struct sdhci_pci_fixes sdhci_gl9750;
|
||||
extern const struct sdhci_pci_fixes sdhci_gl9755;
|
||||
|
||||
#endif /* __SDHCI_PCI_H */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user