mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
ASoC: cs42l42: Correct configuring of switch inversion from ts-inv
[ Upstream commit778a0cbef5
] The setting from the cirrus,ts-inv property should be applied to the TIP_SENSE_INV bit, as this is the one that actually affects the jack detect block. The TS_INV bit only swaps the meaning of the PLUG and UNPLUG interrupts and should always be 1 for the interrupts to have the normal meaning. Due to some misunderstanding the driver had been implemented to configure the TS_INV bit based on the jack switch polarity. This made the interrupts behave the correct way around, but left the jack detect block, button detect and analogue circuits always interpreting an open switch as unplugged. The signal chain inside the codec is: SENSE pin -> TIP_SENSE_INV -> TS_INV -> (invert) -> interrupts | v Jack detect, button detect and analog control As the TIP_SENSE_INV already performs the necessary inversion the TS_INV bit never needs to change. It must always be 1 to yield the expected interrupt behaviour. Some extra confusion has arisen because of the additional invert in the interrupt path, meaning that a value applied to the TS_INV bit produces the opposite effect of applying it to the TIP_SENSE_INV bit. The ts-inv property has therefore always had the opposite effect to what might be expected (0 = inverted, 1 = not inverted). To maintain the meaning of the ts-inv property it must be inverted when applied to TIP_SENSE_INV. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes:2c394ca796
("ASoC: Add support for CS42L42 codec") Link: https://lore.kernel.org/r/20211028140902.11786-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
parent
dfbcaef202
commit
e4fa14bdf8
@ -1684,12 +1684,15 @@ static void cs42l42_setup_hs_type_detect(struct cs42l42_private *cs42l42)
|
||||
(1 << CS42L42_HS_CLAMP_DISABLE_SHIFT));
|
||||
|
||||
/* Enable the tip sense circuit */
|
||||
regmap_update_bits(cs42l42->regmap, CS42L42_TSENSE_CTL,
|
||||
CS42L42_TS_INV_MASK, CS42L42_TS_INV_MASK);
|
||||
|
||||
regmap_update_bits(cs42l42->regmap, CS42L42_TIPSENSE_CTL,
|
||||
CS42L42_TIP_SENSE_CTRL_MASK |
|
||||
CS42L42_TIP_SENSE_INV_MASK |
|
||||
CS42L42_TIP_SENSE_DEBOUNCE_MASK,
|
||||
(3 << CS42L42_TIP_SENSE_CTRL_SHIFT) |
|
||||
(0 << CS42L42_TIP_SENSE_INV_SHIFT) |
|
||||
(!cs42l42->ts_inv << CS42L42_TIP_SENSE_INV_SHIFT) |
|
||||
(2 << CS42L42_TIP_SENSE_DEBOUNCE_SHIFT));
|
||||
|
||||
/* Save the initial status of the tip sense */
|
||||
@ -1733,10 +1736,6 @@ static int cs42l42_handle_device_data(struct device *dev,
|
||||
cs42l42->ts_inv = CS42L42_TS_INV_DIS;
|
||||
}
|
||||
|
||||
regmap_update_bits(cs42l42->regmap, CS42L42_TSENSE_CTL,
|
||||
CS42L42_TS_INV_MASK,
|
||||
(cs42l42->ts_inv << CS42L42_TS_INV_SHIFT));
|
||||
|
||||
ret = device_property_read_u32(dev, "cirrus,ts-dbnc-rise", &val);
|
||||
if (!ret) {
|
||||
switch (val) {
|
||||
|
Loading…
Reference in New Issue
Block a user