mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
[ARM] pxa: merge all eseries board code into eseries.c
Cc: Ian Molton <spyro@f2s.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
This commit is contained in:
Eric Miao
parent
09a5358d1e
commit
e478fe4cd5
@ -86,12 +86,6 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o
|
||||
obj-$(CONFIG_MACH_TOSA) += tosa.o
|
||||
obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
|
||||
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
|
||||
obj-$(CONFIG_MACH_E330) += e330.o
|
||||
obj-$(CONFIG_MACH_E350) += e350.o
|
||||
obj-$(CONFIG_MACH_E740) += e740.o
|
||||
obj-$(CONFIG_MACH_E750) += e750.o
|
||||
obj-$(CONFIG_MACH_E400) += e400.o
|
||||
obj-$(CONFIG_MACH_E800) += e800.o
|
||||
obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
|
||||
obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
|
||||
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
|
||||
|
||||
@ -1,78 +0,0 @@
|
||||
/*
|
||||
* Hardware definitions for the Toshiba e330 PDAs
|
||||
*
|
||||
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
|
||||
*
|
||||
* This file is licensed under
|
||||
* the terms of the GNU General Public License version 2. This program
|
||||
* is licensed "as is" without any warranty of any kind, whether express
|
||||
* or implied.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mfd/tc6387xb.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <mach/pxa25x.h>
|
||||
#include <mach/eseries-gpio.h>
|
||||
#include <mach/udc.h>
|
||||
|
||||
#include "generic.h"
|
||||
#include "eseries.h"
|
||||
#include "clock.h"
|
||||
|
||||
/* -------------------- e330 tc6387xb parameters -------------------- */
|
||||
|
||||
static struct tc6387xb_platform_data e330_tc6387xb_info = {
|
||||
.enable = &eseries_tmio_enable,
|
||||
.disable = &eseries_tmio_disable,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
};
|
||||
|
||||
static struct platform_device e330_tc6387xb_device = {
|
||||
.name = "tc6387xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e330_tc6387xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* --------------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *devices[] __initdata = {
|
||||
&e330_tc6387xb_device,
|
||||
};
|
||||
|
||||
static void __init e330_init(void)
|
||||
{
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
eseries_register_clks();
|
||||
eseries_get_tmio_gpios();
|
||||
platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
pxa_set_udc_info(&e7xx_udc_mach_info);
|
||||
}
|
||||
|
||||
MACHINE_START(E330, "Toshiba e330")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e330_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
|
||||
@ -1,79 +0,0 @@
|
||||
/*
|
||||
* Hardware definitions for the Toshiba e350 PDAs
|
||||
*
|
||||
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
|
||||
*
|
||||
* This file is licensed under
|
||||
* the terms of the GNU General Public License version 2. This program
|
||||
* is licensed "as is" without any warranty of any kind, whether express
|
||||
* or implied.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mfd/t7l66xb.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <mach/irqs.h>
|
||||
#include <mach/pxa25x.h>
|
||||
#include <mach/eseries-gpio.h>
|
||||
#include <mach/udc.h>
|
||||
|
||||
#include "generic.h"
|
||||
#include "eseries.h"
|
||||
#include "clock.h"
|
||||
|
||||
/* -------------------- e350 t7l66xb parameters -------------------- */
|
||||
|
||||
static struct t7l66xb_platform_data e350_t7l66xb_info = {
|
||||
.irq_base = IRQ_BOARD_START,
|
||||
.enable = &eseries_tmio_enable,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
};
|
||||
|
||||
static struct platform_device e350_t7l66xb_device = {
|
||||
.name = "t7l66xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e350_t7l66xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* ---------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *devices[] __initdata = {
|
||||
&e350_t7l66xb_device,
|
||||
};
|
||||
|
||||
static void __init e350_init(void)
|
||||
{
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
eseries_register_clks();
|
||||
eseries_get_tmio_gpios();
|
||||
platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
pxa_set_udc_info(&e7xx_udc_mach_info);
|
||||
}
|
||||
|
||||
MACHINE_START(E350, "Toshiba e350")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e350_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
|
||||
@ -1,155 +0,0 @@
|
||||
/*
|
||||
* Hardware definitions for the Toshiba eseries PDAs
|
||||
*
|
||||
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
|
||||
*
|
||||
* This file is licensed under
|
||||
* the terms of the GNU General Public License version 2. This program
|
||||
* is licensed "as is" without any warranty of any kind, whether express
|
||||
* or implied.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mfd/t7l66xb.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <mach/pxa25x.h>
|
||||
#include <mach/eseries-gpio.h>
|
||||
#include <mach/pxafb.h>
|
||||
#include <mach/udc.h>
|
||||
#include <mach/irqs.h>
|
||||
|
||||
#include "generic.h"
|
||||
#include "eseries.h"
|
||||
#include "clock.h"
|
||||
|
||||
/* ------------------------ E400 LCD definitions ------------------------ */
|
||||
|
||||
static struct pxafb_mode_info e400_pxafb_mode_info = {
|
||||
.pixclock = 140703,
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.bpp = 16,
|
||||
.hsync_len = 4,
|
||||
.left_margin = 28,
|
||||
.right_margin = 8,
|
||||
.vsync_len = 3,
|
||||
.upper_margin = 5,
|
||||
.lower_margin = 6,
|
||||
.sync = 0,
|
||||
};
|
||||
|
||||
static struct pxafb_mach_info e400_pxafb_mach_info = {
|
||||
.modes = &e400_pxafb_mode_info,
|
||||
.num_modes = 1,
|
||||
.lcd_conn = LCD_COLOR_TFT_16BPP,
|
||||
.lccr3 = 0,
|
||||
.pxafb_backlight_power = NULL,
|
||||
};
|
||||
|
||||
/* ------------------------ E400 MFP config ----------------------------- */
|
||||
|
||||
static unsigned long e400_pin_config[] __initdata = {
|
||||
/* Chip selects */
|
||||
GPIO15_nCS_1, /* CS1 - Flash */
|
||||
GPIO80_nCS_4, /* CS4 - TMIO */
|
||||
|
||||
/* Clocks */
|
||||
GPIO12_32KHz,
|
||||
|
||||
/* BTUART */
|
||||
GPIO42_BTUART_RXD,
|
||||
GPIO43_BTUART_TXD,
|
||||
GPIO44_BTUART_CTS,
|
||||
|
||||
/* TMIO controller */
|
||||
GPIO19_GPIO, /* t7l66xb #PCLR */
|
||||
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
|
||||
|
||||
/* wakeup */
|
||||
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
|
||||
};
|
||||
|
||||
/* ---------------------------------------------------------------------- */
|
||||
|
||||
static struct mtd_partition partition_a = {
|
||||
.name = "Internal NAND flash",
|
||||
.offset = 0,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
};
|
||||
|
||||
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
|
||||
|
||||
static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
|
||||
.options = 0,
|
||||
.offs = 4,
|
||||
.len = 2,
|
||||
.pattern = scan_ff_pattern
|
||||
};
|
||||
|
||||
static struct tmio_nand_data e400_t7l66xb_nand_config = {
|
||||
.num_partitions = 1,
|
||||
.partition = &partition_a,
|
||||
.badblock_pattern = &e400_t7l66xb_nand_bbt,
|
||||
};
|
||||
|
||||
static struct t7l66xb_platform_data e400_t7l66xb_info = {
|
||||
.irq_base = IRQ_BOARD_START,
|
||||
.enable = &eseries_tmio_enable,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
|
||||
.nand_data = &e400_t7l66xb_nand_config,
|
||||
};
|
||||
|
||||
static struct platform_device e400_t7l66xb_device = {
|
||||
.name = "t7l66xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e400_t7l66xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* ---------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *devices[] __initdata = {
|
||||
&e400_t7l66xb_device,
|
||||
};
|
||||
|
||||
static void __init e400_init(void)
|
||||
{
|
||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
/* Fixme - e400 may have a switched clock */
|
||||
eseries_register_clks();
|
||||
eseries_get_tmio_gpios();
|
||||
set_pxa_fb_info(&e400_pxafb_mach_info);
|
||||
platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
pxa_set_udc_info(&e7xx_udc_mach_info);
|
||||
}
|
||||
|
||||
MACHINE_START(E400, "Toshiba e400")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e400_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
|
||||
@ -1,225 +0,0 @@
|
||||
/*
|
||||
* Hardware definitions for the Toshiba eseries PDAs
|
||||
*
|
||||
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
|
||||
*
|
||||
* This file is licensed under
|
||||
* the terms of the GNU General Public License version 2. This program
|
||||
* is licensed "as is" without any warranty of any kind, whether express
|
||||
* or implied.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/mfd/t7l66xb.h>
|
||||
|
||||
#include <video/w100fb.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <mach/pxa25x.h>
|
||||
#include <mach/eseries-gpio.h>
|
||||
#include <mach/udc.h>
|
||||
#include <mach/irda.h>
|
||||
#include <mach/irqs.h>
|
||||
#include <mach/audio.h>
|
||||
|
||||
#include "generic.h"
|
||||
#include "eseries.h"
|
||||
#include "clock.h"
|
||||
#include "devices.h"
|
||||
|
||||
/* ------------------------ e740 video support --------------------------- */
|
||||
|
||||
static struct w100_gen_regs e740_lcd_regs = {
|
||||
.lcd_format = 0x00008023,
|
||||
.lcdd_cntl1 = 0x0f000000,
|
||||
.lcdd_cntl2 = 0x0003ffff,
|
||||
.genlcd_cntl1 = 0x00ffff03,
|
||||
.genlcd_cntl2 = 0x003c0f03,
|
||||
.genlcd_cntl3 = 0x000143aa,
|
||||
};
|
||||
|
||||
static struct w100_mode e740_lcd_mode = {
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.left_margin = 20,
|
||||
.right_margin = 28,
|
||||
.upper_margin = 9,
|
||||
.lower_margin = 8,
|
||||
.crtc_ss = 0x80140013,
|
||||
.crtc_ls = 0x81150110,
|
||||
.crtc_gs = 0x80050005,
|
||||
.crtc_vpos_gs = 0x000a0009,
|
||||
.crtc_rev = 0x0040010a,
|
||||
.crtc_dclk = 0xa906000a,
|
||||
.crtc_gclk = 0x80050108,
|
||||
.crtc_goe = 0x80050108,
|
||||
.pll_freq = 57,
|
||||
.pixclk_divider = 4,
|
||||
.pixclk_divider_rotated = 4,
|
||||
.pixclk_src = CLK_SRC_XTAL,
|
||||
.sysclk_divider = 1,
|
||||
.sysclk_src = CLK_SRC_PLL,
|
||||
.crtc_ps1_active = 0x41060010,
|
||||
};
|
||||
|
||||
static struct w100_gpio_regs e740_w100_gpio_info = {
|
||||
.init_data1 = 0x21002103,
|
||||
.gpio_dir1 = 0xffffdeff,
|
||||
.gpio_oe1 = 0x03c00643,
|
||||
.init_data2 = 0x003f003f,
|
||||
.gpio_dir2 = 0xffffffff,
|
||||
.gpio_oe2 = 0x000000ff,
|
||||
};
|
||||
|
||||
static struct w100fb_mach_info e740_fb_info = {
|
||||
.modelist = &e740_lcd_mode,
|
||||
.num_modes = 1,
|
||||
.regs = &e740_lcd_regs,
|
||||
.gpio = &e740_w100_gpio_info,
|
||||
.xtal_freq = 14318000,
|
||||
.xtal_dbl = 1,
|
||||
};
|
||||
|
||||
static struct resource e740_fb_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x0c000000,
|
||||
.end = 0x0cffffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device e740_fb_device = {
|
||||
.name = "w100fb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e740_fb_info,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(e740_fb_resources),
|
||||
.resource = e740_fb_resources,
|
||||
};
|
||||
|
||||
/* --------------------------- MFP Pin config -------------------------- */
|
||||
|
||||
static unsigned long e740_pin_config[] __initdata = {
|
||||
/* Chip selects */
|
||||
GPIO15_nCS_1, /* CS1 - Flash */
|
||||
GPIO79_nCS_3, /* CS3 - IMAGEON */
|
||||
GPIO80_nCS_4, /* CS4 - TMIO */
|
||||
|
||||
/* Clocks */
|
||||
GPIO12_32KHz,
|
||||
|
||||
/* BTUART */
|
||||
GPIO42_BTUART_RXD,
|
||||
GPIO43_BTUART_TXD,
|
||||
GPIO44_BTUART_CTS,
|
||||
|
||||
/* TMIO controller */
|
||||
GPIO19_GPIO, /* t7l66xb #PCLR */
|
||||
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
|
||||
|
||||
/* UDC */
|
||||
GPIO13_GPIO,
|
||||
GPIO3_GPIO,
|
||||
|
||||
/* IrDA */
|
||||
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
|
||||
|
||||
/* AC97 */
|
||||
GPIO28_AC97_BITCLK,
|
||||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
|
||||
/* Audio power control */
|
||||
GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
|
||||
GPIO40_GPIO, /* Mic amp power */
|
||||
GPIO41_GPIO, /* Headphone amp power */
|
||||
|
||||
/* PC Card */
|
||||
GPIO8_GPIO, /* CD0 */
|
||||
GPIO44_GPIO, /* CD1 */
|
||||
GPIO11_GPIO, /* IRQ0 */
|
||||
GPIO6_GPIO, /* IRQ1 */
|
||||
GPIO27_GPIO, /* RST0 */
|
||||
GPIO24_GPIO, /* RST1 */
|
||||
GPIO20_GPIO, /* PWR0 */
|
||||
GPIO23_GPIO, /* PWR1 */
|
||||
GPIO48_nPOE,
|
||||
GPIO49_nPWE,
|
||||
GPIO50_nPIOR,
|
||||
GPIO51_nPIOW,
|
||||
GPIO52_nPCE_1,
|
||||
GPIO53_nPCE_2,
|
||||
GPIO54_nPSKTSEL,
|
||||
GPIO55_nPREG,
|
||||
GPIO56_nPWAIT,
|
||||
GPIO57_nIOIS16,
|
||||
|
||||
/* wakeup */
|
||||
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
|
||||
};
|
||||
|
||||
/* -------------------- e740 t7l66xb parameters -------------------- */
|
||||
|
||||
static struct t7l66xb_platform_data e740_t7l66xb_info = {
|
||||
.irq_base = IRQ_BOARD_START,
|
||||
.enable = &eseries_tmio_enable,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
};
|
||||
|
||||
static struct platform_device e740_t7l66xb_device = {
|
||||
.name = "t7l66xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e740_t7l66xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* ----------------------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *devices[] __initdata = {
|
||||
&e740_fb_device,
|
||||
&e740_t7l66xb_device,
|
||||
};
|
||||
|
||||
static void __init e740_init(void)
|
||||
{
|
||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
eseries_register_clks();
|
||||
clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
|
||||
"UDCCLK", &pxa25x_device_udc.dev),
|
||||
eseries_get_tmio_gpios();
|
||||
platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
pxa_set_udc_info(&e7xx_udc_mach_info);
|
||||
pxa_set_ac97_info(NULL);
|
||||
pxa_set_ficp_info(&e7xx_ficp_platform_data);
|
||||
}
|
||||
|
||||
MACHINE_START(E740, "Toshiba e740")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e740_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
|
||||
@ -1,226 +0,0 @@
|
||||
/*
|
||||
* Hardware definitions for the Toshiba eseries PDAs
|
||||
*
|
||||
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
|
||||
*
|
||||
* This file is licensed under
|
||||
* the terms of the GNU General Public License version 2. This program
|
||||
* is licensed "as is" without any warranty of any kind, whether express
|
||||
* or implied.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/mfd/tc6393xb.h>
|
||||
|
||||
#include <video/w100fb.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <mach/pxa25x.h>
|
||||
#include <mach/eseries-gpio.h>
|
||||
#include <mach/udc.h>
|
||||
#include <mach/irda.h>
|
||||
#include <mach/irqs.h>
|
||||
#include <mach/audio.h>
|
||||
|
||||
#include "generic.h"
|
||||
#include "eseries.h"
|
||||
#include "clock.h"
|
||||
|
||||
/* ---------------------- E750 LCD definitions -------------------- */
|
||||
|
||||
static struct w100_gen_regs e750_lcd_regs = {
|
||||
.lcd_format = 0x00008003,
|
||||
.lcdd_cntl1 = 0x00000000,
|
||||
.lcdd_cntl2 = 0x0003ffff,
|
||||
.genlcd_cntl1 = 0x00fff003,
|
||||
.genlcd_cntl2 = 0x003c0f03,
|
||||
.genlcd_cntl3 = 0x000143aa,
|
||||
};
|
||||
|
||||
static struct w100_mode e750_lcd_mode = {
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.left_margin = 21,
|
||||
.right_margin = 22,
|
||||
.upper_margin = 5,
|
||||
.lower_margin = 4,
|
||||
.crtc_ss = 0x80150014,
|
||||
.crtc_ls = 0x8014000d,
|
||||
.crtc_gs = 0xc1000005,
|
||||
.crtc_vpos_gs = 0x00020147,
|
||||
.crtc_rev = 0x0040010a,
|
||||
.crtc_dclk = 0xa1700030,
|
||||
.crtc_gclk = 0x80cc0015,
|
||||
.crtc_goe = 0x80cc0015,
|
||||
.crtc_ps1_active = 0x61060017,
|
||||
.pll_freq = 57,
|
||||
.pixclk_divider = 4,
|
||||
.pixclk_divider_rotated = 4,
|
||||
.pixclk_src = CLK_SRC_XTAL,
|
||||
.sysclk_divider = 1,
|
||||
.sysclk_src = CLK_SRC_PLL,
|
||||
};
|
||||
|
||||
static struct w100_gpio_regs e750_w100_gpio_info = {
|
||||
.init_data1 = 0x01192f1b,
|
||||
.gpio_dir1 = 0xd5ffdeff,
|
||||
.gpio_oe1 = 0x000020bf,
|
||||
.init_data2 = 0x010f010f,
|
||||
.gpio_dir2 = 0xffffffff,
|
||||
.gpio_oe2 = 0x000001cf,
|
||||
};
|
||||
|
||||
static struct w100fb_mach_info e750_fb_info = {
|
||||
.modelist = &e750_lcd_mode,
|
||||
.num_modes = 1,
|
||||
.regs = &e750_lcd_regs,
|
||||
.gpio = &e750_w100_gpio_info,
|
||||
.xtal_freq = 14318000,
|
||||
.xtal_dbl = 1,
|
||||
};
|
||||
|
||||
static struct resource e750_fb_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x0c000000,
|
||||
.end = 0x0cffffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device e750_fb_device = {
|
||||
.name = "w100fb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e750_fb_info,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(e750_fb_resources),
|
||||
.resource = e750_fb_resources,
|
||||
};
|
||||
|
||||
/* -------------------- e750 MFP parameters -------------------- */
|
||||
|
||||
static unsigned long e750_pin_config[] __initdata = {
|
||||
/* Chip selects */
|
||||
GPIO15_nCS_1, /* CS1 - Flash */
|
||||
GPIO79_nCS_3, /* CS3 - IMAGEON */
|
||||
GPIO80_nCS_4, /* CS4 - TMIO */
|
||||
|
||||
/* Clocks */
|
||||
GPIO11_3_6MHz,
|
||||
|
||||
/* BTUART */
|
||||
GPIO42_BTUART_RXD,
|
||||
GPIO43_BTUART_TXD,
|
||||
GPIO44_BTUART_CTS,
|
||||
|
||||
/* TMIO controller */
|
||||
GPIO19_GPIO, /* t7l66xb #PCLR */
|
||||
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
|
||||
|
||||
/* UDC */
|
||||
GPIO13_GPIO,
|
||||
GPIO3_GPIO,
|
||||
|
||||
/* IrDA */
|
||||
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
|
||||
|
||||
/* AC97 */
|
||||
GPIO28_AC97_BITCLK,
|
||||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
|
||||
/* Audio power control */
|
||||
GPIO4_GPIO, /* Headphone amp power */
|
||||
GPIO7_GPIO, /* Speaker amp power */
|
||||
GPIO37_GPIO, /* Headphone detect */
|
||||
|
||||
/* PC Card */
|
||||
GPIO8_GPIO, /* CD0 */
|
||||
GPIO44_GPIO, /* CD1 */
|
||||
GPIO11_GPIO, /* IRQ0 */
|
||||
GPIO6_GPIO, /* IRQ1 */
|
||||
GPIO27_GPIO, /* RST0 */
|
||||
GPIO24_GPIO, /* RST1 */
|
||||
GPIO20_GPIO, /* PWR0 */
|
||||
GPIO23_GPIO, /* PWR1 */
|
||||
GPIO48_nPOE,
|
||||
GPIO49_nPWE,
|
||||
GPIO50_nPIOR,
|
||||
GPIO51_nPIOW,
|
||||
GPIO52_nPCE_1,
|
||||
GPIO53_nPCE_2,
|
||||
GPIO54_nPSKTSEL,
|
||||
GPIO55_nPREG,
|
||||
GPIO56_nPWAIT,
|
||||
GPIO57_nIOIS16,
|
||||
|
||||
/* wakeup */
|
||||
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
|
||||
};
|
||||
|
||||
/* ----------------- e750 tc6393xb parameters ------------------ */
|
||||
|
||||
static struct tc6393xb_platform_data e750_tc6393xb_info = {
|
||||
.irq_base = IRQ_BOARD_START,
|
||||
.scr_pll2cr = 0x0cc1,
|
||||
.scr_gper = 0,
|
||||
.gpio_base = -1,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
.enable = &eseries_tmio_enable,
|
||||
.disable = &eseries_tmio_disable,
|
||||
};
|
||||
|
||||
static struct platform_device e750_tc6393xb_device = {
|
||||
.name = "tc6393xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e750_tc6393xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* ------------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *devices[] __initdata = {
|
||||
&e750_fb_device,
|
||||
&e750_tc6393xb_device,
|
||||
};
|
||||
|
||||
static void __init e750_init(void)
|
||||
{
|
||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
|
||||
"GPIO11_CLK", NULL),
|
||||
eseries_get_tmio_gpios();
|
||||
platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
pxa_set_udc_info(&e7xx_udc_mach_info);
|
||||
pxa_set_ac97_info(NULL);
|
||||
pxa_set_ficp_info(&e7xx_ficp_platform_data);
|
||||
}
|
||||
|
||||
MACHINE_START(E750, "Toshiba e750")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e750_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
|
||||
@ -1,229 +0,0 @@
|
||||
/*
|
||||
* Hardware definitions for the Toshiba eseries PDAs
|
||||
*
|
||||
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
|
||||
*
|
||||
* This file is licensed under
|
||||
* the terms of the GNU General Public License version 2. This program
|
||||
* is licensed "as is" without any warranty of any kind, whether express
|
||||
* or implied.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/mfd/tc6393xb.h>
|
||||
|
||||
#include <video/w100fb.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <mach/pxa25x.h>
|
||||
#include <mach/eseries-gpio.h>
|
||||
#include <mach/udc.h>
|
||||
#include <mach/irqs.h>
|
||||
#include <mach/audio.h>
|
||||
|
||||
#include "generic.h"
|
||||
#include "eseries.h"
|
||||
#include "clock.h"
|
||||
|
||||
/* ------------------------ e800 LCD definitions ------------------------- */
|
||||
|
||||
static unsigned long e800_pin_config[] __initdata = {
|
||||
/* AC97 */
|
||||
GPIO28_AC97_BITCLK,
|
||||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
};
|
||||
|
||||
static struct w100_gen_regs e800_lcd_regs = {
|
||||
.lcd_format = 0x00008003,
|
||||
.lcdd_cntl1 = 0x02a00000,
|
||||
.lcdd_cntl2 = 0x0003ffff,
|
||||
.genlcd_cntl1 = 0x000ff2a3,
|
||||
.genlcd_cntl2 = 0x000002a3,
|
||||
.genlcd_cntl3 = 0x000102aa,
|
||||
};
|
||||
|
||||
static struct w100_mode e800_lcd_mode[2] = {
|
||||
[0] = {
|
||||
.xres = 480,
|
||||
.yres = 640,
|
||||
.left_margin = 52,
|
||||
.right_margin = 148,
|
||||
.upper_margin = 2,
|
||||
.lower_margin = 6,
|
||||
.crtc_ss = 0x80350034,
|
||||
.crtc_ls = 0x802b0026,
|
||||
.crtc_gs = 0x80160016,
|
||||
.crtc_vpos_gs = 0x00020003,
|
||||
.crtc_rev = 0x0040001d,
|
||||
.crtc_dclk = 0xe0000000,
|
||||
.crtc_gclk = 0x82a50049,
|
||||
.crtc_goe = 0x80ee001c,
|
||||
.crtc_ps1_active = 0x00000000,
|
||||
.pll_freq = 128,
|
||||
.pixclk_divider = 4,
|
||||
.pixclk_divider_rotated = 6,
|
||||
.pixclk_src = CLK_SRC_PLL,
|
||||
.sysclk_divider = 0,
|
||||
.sysclk_src = CLK_SRC_PLL,
|
||||
},
|
||||
[1] = {
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.left_margin = 15,
|
||||
.right_margin = 88,
|
||||
.upper_margin = 0,
|
||||
.lower_margin = 7,
|
||||
.crtc_ss = 0xd010000f,
|
||||
.crtc_ls = 0x80070003,
|
||||
.crtc_gs = 0x80000000,
|
||||
.crtc_vpos_gs = 0x01460147,
|
||||
.crtc_rev = 0x00400003,
|
||||
.crtc_dclk = 0xa1700030,
|
||||
.crtc_gclk = 0x814b0008,
|
||||
.crtc_goe = 0x80cc0015,
|
||||
.crtc_ps1_active = 0x00000000,
|
||||
.pll_freq = 100,
|
||||
.pixclk_divider = 6, /* Wince uses 14 which gives a */
|
||||
.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
|
||||
.pixclk_src = CLK_SRC_PLL,
|
||||
.sysclk_divider = 0,
|
||||
.sysclk_src = CLK_SRC_PLL,
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
static struct w100_gpio_regs e800_w100_gpio_info = {
|
||||
.init_data1 = 0xc13fc019,
|
||||
.gpio_dir1 = 0x3e40df7f,
|
||||
.gpio_oe1 = 0x003c3000,
|
||||
.init_data2 = 0x00000000,
|
||||
.gpio_dir2 = 0x00000000,
|
||||
.gpio_oe2 = 0x00000000,
|
||||
};
|
||||
|
||||
static struct w100_mem_info e800_w100_mem_info = {
|
||||
.ext_cntl = 0x09640011,
|
||||
.sdram_mode_reg = 0x00600021,
|
||||
.ext_timing_cntl = 0x10001545,
|
||||
.io_cntl = 0x7ddd7333,
|
||||
.size = 0x1fffff,
|
||||
};
|
||||
|
||||
static void e800_tg_change(struct w100fb_par *par)
|
||||
{
|
||||
unsigned long tmp;
|
||||
|
||||
tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
|
||||
if (par->mode->xres == 480)
|
||||
tmp |= 0x100;
|
||||
else
|
||||
tmp &= ~0x100;
|
||||
w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
|
||||
}
|
||||
|
||||
static struct w100_tg_info e800_tg_info = {
|
||||
.change = e800_tg_change,
|
||||
};
|
||||
|
||||
static struct w100fb_mach_info e800_fb_info = {
|
||||
.modelist = e800_lcd_mode,
|
||||
.num_modes = 2,
|
||||
.regs = &e800_lcd_regs,
|
||||
.gpio = &e800_w100_gpio_info,
|
||||
.mem = &e800_w100_mem_info,
|
||||
.tg = &e800_tg_info,
|
||||
.xtal_freq = 16000000,
|
||||
};
|
||||
|
||||
static struct resource e800_fb_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x0c000000,
|
||||
.end = 0x0cffffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device e800_fb_device = {
|
||||
.name = "w100fb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e800_fb_info,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(e800_fb_resources),
|
||||
.resource = e800_fb_resources,
|
||||
};
|
||||
|
||||
/* --------------------------- UDC definitions --------------------------- */
|
||||
|
||||
static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
|
||||
.gpio_vbus = GPIO_E800_USB_DISC,
|
||||
.gpio_pullup = GPIO_E800_USB_PULLUP,
|
||||
.gpio_pullup_inverted = 1
|
||||
};
|
||||
|
||||
/* ----------------- e800 tc6393xb parameters ------------------ */
|
||||
|
||||
static struct tc6393xb_platform_data e800_tc6393xb_info = {
|
||||
.irq_base = IRQ_BOARD_START,
|
||||
.scr_pll2cr = 0x0cc1,
|
||||
.scr_gper = 0,
|
||||
.gpio_base = -1,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
.enable = &eseries_tmio_enable,
|
||||
.disable = &eseries_tmio_disable,
|
||||
};
|
||||
|
||||
static struct platform_device e800_tc6393xb_device = {
|
||||
.name = "tc6393xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e800_tc6393xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* ----------------------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *devices[] __initdata = {
|
||||
&e800_fb_device,
|
||||
&e800_tc6393xb_device,
|
||||
};
|
||||
|
||||
static void __init e800_init(void)
|
||||
{
|
||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
|
||||
"GPIO11_CLK", NULL),
|
||||
eseries_get_tmio_gpios();
|
||||
platform_add_devices(devices, ARRAY_SIZE(devices));
|
||||
pxa_set_udc_info(&e800_udc_mach_info);
|
||||
pxa_set_ac97_info(NULL);
|
||||
}
|
||||
|
||||
MACHINE_START(E800, "Toshiba e800")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e800_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
|
||||
@ -15,6 +15,13 @@
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mfd/tc6387xb.h>
|
||||
#include <linux/mfd/tc6393xb.h>
|
||||
#include <linux/mfd/t7l66xb.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <video/w100fb.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach/arch.h>
|
||||
@ -22,9 +29,12 @@
|
||||
|
||||
#include <mach/pxa25x.h>
|
||||
#include <mach/eseries-gpio.h>
|
||||
#include <mach/audio.h>
|
||||
#include <mach/pxafb.h>
|
||||
#include <mach/udc.h>
|
||||
#include <mach/irda.h>
|
||||
|
||||
#include "devices.h"
|
||||
#include "generic.h"
|
||||
#include "clock.h"
|
||||
|
||||
@ -131,3 +141,802 @@ void eseries_register_clks(void)
|
||||
clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MACH_E330
|
||||
/* -------------------- e330 tc6387xb parameters -------------------- */
|
||||
|
||||
static struct tc6387xb_platform_data e330_tc6387xb_info = {
|
||||
.enable = &eseries_tmio_enable,
|
||||
.disable = &eseries_tmio_disable,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
};
|
||||
|
||||
static struct platform_device e330_tc6387xb_device = {
|
||||
.name = "tc6387xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e330_tc6387xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* --------------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *e330_devices[] __initdata = {
|
||||
&e330_tc6387xb_device,
|
||||
};
|
||||
|
||||
static void __init e330_init(void)
|
||||
{
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
eseries_register_clks();
|
||||
eseries_get_tmio_gpios();
|
||||
platform_add_devices(ARRAY_AND_SIZE(e330_devices));
|
||||
pxa_set_udc_info(&e7xx_udc_mach_info);
|
||||
}
|
||||
|
||||
MACHINE_START(E330, "Toshiba e330")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e330_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_E350
|
||||
/* -------------------- e350 t7l66xb parameters -------------------- */
|
||||
|
||||
static struct t7l66xb_platform_data e350_t7l66xb_info = {
|
||||
.irq_base = IRQ_BOARD_START,
|
||||
.enable = &eseries_tmio_enable,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
};
|
||||
|
||||
static struct platform_device e350_t7l66xb_device = {
|
||||
.name = "t7l66xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e350_t7l66xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* ---------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *e350_devices[] __initdata = {
|
||||
&e350_t7l66xb_device,
|
||||
};
|
||||
|
||||
static void __init e350_init(void)
|
||||
{
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
eseries_register_clks();
|
||||
eseries_get_tmio_gpios();
|
||||
platform_add_devices(ARRAY_AND_SIZE(e350_devices));
|
||||
pxa_set_udc_info(&e7xx_udc_mach_info);
|
||||
}
|
||||
|
||||
MACHINE_START(E350, "Toshiba e350")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e350_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_E400
|
||||
/* ------------------------ E400 LCD definitions ------------------------ */
|
||||
|
||||
static struct pxafb_mode_info e400_pxafb_mode_info = {
|
||||
.pixclock = 140703,
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.bpp = 16,
|
||||
.hsync_len = 4,
|
||||
.left_margin = 28,
|
||||
.right_margin = 8,
|
||||
.vsync_len = 3,
|
||||
.upper_margin = 5,
|
||||
.lower_margin = 6,
|
||||
.sync = 0,
|
||||
};
|
||||
|
||||
static struct pxafb_mach_info e400_pxafb_mach_info = {
|
||||
.modes = &e400_pxafb_mode_info,
|
||||
.num_modes = 1,
|
||||
.lcd_conn = LCD_COLOR_TFT_16BPP,
|
||||
.lccr3 = 0,
|
||||
.pxafb_backlight_power = NULL,
|
||||
};
|
||||
|
||||
/* ------------------------ E400 MFP config ----------------------------- */
|
||||
|
||||
static unsigned long e400_pin_config[] __initdata = {
|
||||
/* Chip selects */
|
||||
GPIO15_nCS_1, /* CS1 - Flash */
|
||||
GPIO80_nCS_4, /* CS4 - TMIO */
|
||||
|
||||
/* Clocks */
|
||||
GPIO12_32KHz,
|
||||
|
||||
/* BTUART */
|
||||
GPIO42_BTUART_RXD,
|
||||
GPIO43_BTUART_TXD,
|
||||
GPIO44_BTUART_CTS,
|
||||
|
||||
/* TMIO controller */
|
||||
GPIO19_GPIO, /* t7l66xb #PCLR */
|
||||
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
|
||||
|
||||
/* wakeup */
|
||||
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
|
||||
};
|
||||
|
||||
/* ---------------------------------------------------------------------- */
|
||||
|
||||
static struct mtd_partition partition_a = {
|
||||
.name = "Internal NAND flash",
|
||||
.offset = 0,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
};
|
||||
|
||||
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
|
||||
|
||||
static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
|
||||
.options = 0,
|
||||
.offs = 4,
|
||||
.len = 2,
|
||||
.pattern = scan_ff_pattern
|
||||
};
|
||||
|
||||
static struct tmio_nand_data e400_t7l66xb_nand_config = {
|
||||
.num_partitions = 1,
|
||||
.partition = &partition_a,
|
||||
.badblock_pattern = &e400_t7l66xb_nand_bbt,
|
||||
};
|
||||
|
||||
static struct t7l66xb_platform_data e400_t7l66xb_info = {
|
||||
.irq_base = IRQ_BOARD_START,
|
||||
.enable = &eseries_tmio_enable,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
|
||||
.nand_data = &e400_t7l66xb_nand_config,
|
||||
};
|
||||
|
||||
static struct platform_device e400_t7l66xb_device = {
|
||||
.name = "t7l66xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e400_t7l66xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* ---------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *e400_devices[] __initdata = {
|
||||
&e400_t7l66xb_device,
|
||||
};
|
||||
|
||||
static void __init e400_init(void)
|
||||
{
|
||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
/* Fixme - e400 may have a switched clock */
|
||||
eseries_register_clks();
|
||||
eseries_get_tmio_gpios();
|
||||
set_pxa_fb_info(&e400_pxafb_mach_info);
|
||||
platform_add_devices(ARRAY_AND_SIZE(e400_devices));
|
||||
pxa_set_udc_info(&e7xx_udc_mach_info);
|
||||
}
|
||||
|
||||
MACHINE_START(E400, "Toshiba e400")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e400_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_E740
|
||||
/* ------------------------ e740 video support --------------------------- */
|
||||
|
||||
static struct w100_gen_regs e740_lcd_regs = {
|
||||
.lcd_format = 0x00008023,
|
||||
.lcdd_cntl1 = 0x0f000000,
|
||||
.lcdd_cntl2 = 0x0003ffff,
|
||||
.genlcd_cntl1 = 0x00ffff03,
|
||||
.genlcd_cntl2 = 0x003c0f03,
|
||||
.genlcd_cntl3 = 0x000143aa,
|
||||
};
|
||||
|
||||
static struct w100_mode e740_lcd_mode = {
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.left_margin = 20,
|
||||
.right_margin = 28,
|
||||
.upper_margin = 9,
|
||||
.lower_margin = 8,
|
||||
.crtc_ss = 0x80140013,
|
||||
.crtc_ls = 0x81150110,
|
||||
.crtc_gs = 0x80050005,
|
||||
.crtc_vpos_gs = 0x000a0009,
|
||||
.crtc_rev = 0x0040010a,
|
||||
.crtc_dclk = 0xa906000a,
|
||||
.crtc_gclk = 0x80050108,
|
||||
.crtc_goe = 0x80050108,
|
||||
.pll_freq = 57,
|
||||
.pixclk_divider = 4,
|
||||
.pixclk_divider_rotated = 4,
|
||||
.pixclk_src = CLK_SRC_XTAL,
|
||||
.sysclk_divider = 1,
|
||||
.sysclk_src = CLK_SRC_PLL,
|
||||
.crtc_ps1_active = 0x41060010,
|
||||
};
|
||||
|
||||
static struct w100_gpio_regs e740_w100_gpio_info = {
|
||||
.init_data1 = 0x21002103,
|
||||
.gpio_dir1 = 0xffffdeff,
|
||||
.gpio_oe1 = 0x03c00643,
|
||||
.init_data2 = 0x003f003f,
|
||||
.gpio_dir2 = 0xffffffff,
|
||||
.gpio_oe2 = 0x000000ff,
|
||||
};
|
||||
|
||||
static struct w100fb_mach_info e740_fb_info = {
|
||||
.modelist = &e740_lcd_mode,
|
||||
.num_modes = 1,
|
||||
.regs = &e740_lcd_regs,
|
||||
.gpio = &e740_w100_gpio_info,
|
||||
.xtal_freq = 14318000,
|
||||
.xtal_dbl = 1,
|
||||
};
|
||||
|
||||
static struct resource e740_fb_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x0c000000,
|
||||
.end = 0x0cffffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device e740_fb_device = {
|
||||
.name = "w100fb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e740_fb_info,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(e740_fb_resources),
|
||||
.resource = e740_fb_resources,
|
||||
};
|
||||
|
||||
/* --------------------------- MFP Pin config -------------------------- */
|
||||
|
||||
static unsigned long e740_pin_config[] __initdata = {
|
||||
/* Chip selects */
|
||||
GPIO15_nCS_1, /* CS1 - Flash */
|
||||
GPIO79_nCS_3, /* CS3 - IMAGEON */
|
||||
GPIO80_nCS_4, /* CS4 - TMIO */
|
||||
|
||||
/* Clocks */
|
||||
GPIO12_32KHz,
|
||||
|
||||
/* BTUART */
|
||||
GPIO42_BTUART_RXD,
|
||||
GPIO43_BTUART_TXD,
|
||||
GPIO44_BTUART_CTS,
|
||||
|
||||
/* TMIO controller */
|
||||
GPIO19_GPIO, /* t7l66xb #PCLR */
|
||||
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
|
||||
|
||||
/* UDC */
|
||||
GPIO13_GPIO,
|
||||
GPIO3_GPIO,
|
||||
|
||||
/* IrDA */
|
||||
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
|
||||
|
||||
/* AC97 */
|
||||
GPIO28_AC97_BITCLK,
|
||||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
|
||||
/* Audio power control */
|
||||
GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
|
||||
GPIO40_GPIO, /* Mic amp power */
|
||||
GPIO41_GPIO, /* Headphone amp power */
|
||||
|
||||
/* PC Card */
|
||||
GPIO8_GPIO, /* CD0 */
|
||||
GPIO44_GPIO, /* CD1 */
|
||||
GPIO11_GPIO, /* IRQ0 */
|
||||
GPIO6_GPIO, /* IRQ1 */
|
||||
GPIO27_GPIO, /* RST0 */
|
||||
GPIO24_GPIO, /* RST1 */
|
||||
GPIO20_GPIO, /* PWR0 */
|
||||
GPIO23_GPIO, /* PWR1 */
|
||||
GPIO48_nPOE,
|
||||
GPIO49_nPWE,
|
||||
GPIO50_nPIOR,
|
||||
GPIO51_nPIOW,
|
||||
GPIO52_nPCE_1,
|
||||
GPIO53_nPCE_2,
|
||||
GPIO54_nPSKTSEL,
|
||||
GPIO55_nPREG,
|
||||
GPIO56_nPWAIT,
|
||||
GPIO57_nIOIS16,
|
||||
|
||||
/* wakeup */
|
||||
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
|
||||
};
|
||||
|
||||
/* -------------------- e740 t7l66xb parameters -------------------- */
|
||||
|
||||
static struct t7l66xb_platform_data e740_t7l66xb_info = {
|
||||
.irq_base = IRQ_BOARD_START,
|
||||
.enable = &eseries_tmio_enable,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
};
|
||||
|
||||
static struct platform_device e740_t7l66xb_device = {
|
||||
.name = "t7l66xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e740_t7l66xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* ----------------------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *e740_devices[] __initdata = {
|
||||
&e740_fb_device,
|
||||
&e740_t7l66xb_device,
|
||||
};
|
||||
|
||||
static void __init e740_init(void)
|
||||
{
|
||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
eseries_register_clks();
|
||||
clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
|
||||
"UDCCLK", &pxa25x_device_udc.dev),
|
||||
eseries_get_tmio_gpios();
|
||||
platform_add_devices(ARRAY_AND_SIZE(e740_devices));
|
||||
pxa_set_udc_info(&e7xx_udc_mach_info);
|
||||
pxa_set_ac97_info(NULL);
|
||||
pxa_set_ficp_info(&e7xx_ficp_platform_data);
|
||||
}
|
||||
|
||||
MACHINE_START(E740, "Toshiba e740")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e740_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_E750
|
||||
/* ---------------------- E750 LCD definitions -------------------- */
|
||||
|
||||
static struct w100_gen_regs e750_lcd_regs = {
|
||||
.lcd_format = 0x00008003,
|
||||
.lcdd_cntl1 = 0x00000000,
|
||||
.lcdd_cntl2 = 0x0003ffff,
|
||||
.genlcd_cntl1 = 0x00fff003,
|
||||
.genlcd_cntl2 = 0x003c0f03,
|
||||
.genlcd_cntl3 = 0x000143aa,
|
||||
};
|
||||
|
||||
static struct w100_mode e750_lcd_mode = {
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.left_margin = 21,
|
||||
.right_margin = 22,
|
||||
.upper_margin = 5,
|
||||
.lower_margin = 4,
|
||||
.crtc_ss = 0x80150014,
|
||||
.crtc_ls = 0x8014000d,
|
||||
.crtc_gs = 0xc1000005,
|
||||
.crtc_vpos_gs = 0x00020147,
|
||||
.crtc_rev = 0x0040010a,
|
||||
.crtc_dclk = 0xa1700030,
|
||||
.crtc_gclk = 0x80cc0015,
|
||||
.crtc_goe = 0x80cc0015,
|
||||
.crtc_ps1_active = 0x61060017,
|
||||
.pll_freq = 57,
|
||||
.pixclk_divider = 4,
|
||||
.pixclk_divider_rotated = 4,
|
||||
.pixclk_src = CLK_SRC_XTAL,
|
||||
.sysclk_divider = 1,
|
||||
.sysclk_src = CLK_SRC_PLL,
|
||||
};
|
||||
|
||||
static struct w100_gpio_regs e750_w100_gpio_info = {
|
||||
.init_data1 = 0x01192f1b,
|
||||
.gpio_dir1 = 0xd5ffdeff,
|
||||
.gpio_oe1 = 0x000020bf,
|
||||
.init_data2 = 0x010f010f,
|
||||
.gpio_dir2 = 0xffffffff,
|
||||
.gpio_oe2 = 0x000001cf,
|
||||
};
|
||||
|
||||
static struct w100fb_mach_info e750_fb_info = {
|
||||
.modelist = &e750_lcd_mode,
|
||||
.num_modes = 1,
|
||||
.regs = &e750_lcd_regs,
|
||||
.gpio = &e750_w100_gpio_info,
|
||||
.xtal_freq = 14318000,
|
||||
.xtal_dbl = 1,
|
||||
};
|
||||
|
||||
static struct resource e750_fb_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x0c000000,
|
||||
.end = 0x0cffffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device e750_fb_device = {
|
||||
.name = "w100fb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e750_fb_info,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(e750_fb_resources),
|
||||
.resource = e750_fb_resources,
|
||||
};
|
||||
|
||||
/* -------------------- e750 MFP parameters -------------------- */
|
||||
|
||||
static unsigned long e750_pin_config[] __initdata = {
|
||||
/* Chip selects */
|
||||
GPIO15_nCS_1, /* CS1 - Flash */
|
||||
GPIO79_nCS_3, /* CS3 - IMAGEON */
|
||||
GPIO80_nCS_4, /* CS4 - TMIO */
|
||||
|
||||
/* Clocks */
|
||||
GPIO11_3_6MHz,
|
||||
|
||||
/* BTUART */
|
||||
GPIO42_BTUART_RXD,
|
||||
GPIO43_BTUART_TXD,
|
||||
GPIO44_BTUART_CTS,
|
||||
|
||||
/* TMIO controller */
|
||||
GPIO19_GPIO, /* t7l66xb #PCLR */
|
||||
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
|
||||
|
||||
/* UDC */
|
||||
GPIO13_GPIO,
|
||||
GPIO3_GPIO,
|
||||
|
||||
/* IrDA */
|
||||
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
|
||||
|
||||
/* AC97 */
|
||||
GPIO28_AC97_BITCLK,
|
||||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
|
||||
/* Audio power control */
|
||||
GPIO4_GPIO, /* Headphone amp power */
|
||||
GPIO7_GPIO, /* Speaker amp power */
|
||||
GPIO37_GPIO, /* Headphone detect */
|
||||
|
||||
/* PC Card */
|
||||
GPIO8_GPIO, /* CD0 */
|
||||
GPIO44_GPIO, /* CD1 */
|
||||
GPIO11_GPIO, /* IRQ0 */
|
||||
GPIO6_GPIO, /* IRQ1 */
|
||||
GPIO27_GPIO, /* RST0 */
|
||||
GPIO24_GPIO, /* RST1 */
|
||||
GPIO20_GPIO, /* PWR0 */
|
||||
GPIO23_GPIO, /* PWR1 */
|
||||
GPIO48_nPOE,
|
||||
GPIO49_nPWE,
|
||||
GPIO50_nPIOR,
|
||||
GPIO51_nPIOW,
|
||||
GPIO52_nPCE_1,
|
||||
GPIO53_nPCE_2,
|
||||
GPIO54_nPSKTSEL,
|
||||
GPIO55_nPREG,
|
||||
GPIO56_nPWAIT,
|
||||
GPIO57_nIOIS16,
|
||||
|
||||
/* wakeup */
|
||||
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
|
||||
};
|
||||
|
||||
/* ----------------- e750 tc6393xb parameters ------------------ */
|
||||
|
||||
static struct tc6393xb_platform_data e750_tc6393xb_info = {
|
||||
.irq_base = IRQ_BOARD_START,
|
||||
.scr_pll2cr = 0x0cc1,
|
||||
.scr_gper = 0,
|
||||
.gpio_base = -1,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
.enable = &eseries_tmio_enable,
|
||||
.disable = &eseries_tmio_disable,
|
||||
};
|
||||
|
||||
static struct platform_device e750_tc6393xb_device = {
|
||||
.name = "tc6393xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e750_tc6393xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* ------------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *e750_devices[] __initdata = {
|
||||
&e750_fb_device,
|
||||
&e750_tc6393xb_device,
|
||||
};
|
||||
|
||||
static void __init e750_init(void)
|
||||
{
|
||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
|
||||
"GPIO11_CLK", NULL),
|
||||
eseries_get_tmio_gpios();
|
||||
platform_add_devices(ARRAY_AND_SIZE(e750_devices));
|
||||
pxa_set_udc_info(&e7xx_udc_mach_info);
|
||||
pxa_set_ac97_info(NULL);
|
||||
pxa_set_ficp_info(&e7xx_ficp_platform_data);
|
||||
}
|
||||
|
||||
MACHINE_START(E750, "Toshiba e750")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e750_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_E800
|
||||
/* ------------------------ e800 LCD definitions ------------------------- */
|
||||
|
||||
static unsigned long e800_pin_config[] __initdata = {
|
||||
/* AC97 */
|
||||
GPIO28_AC97_BITCLK,
|
||||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
};
|
||||
|
||||
static struct w100_gen_regs e800_lcd_regs = {
|
||||
.lcd_format = 0x00008003,
|
||||
.lcdd_cntl1 = 0x02a00000,
|
||||
.lcdd_cntl2 = 0x0003ffff,
|
||||
.genlcd_cntl1 = 0x000ff2a3,
|
||||
.genlcd_cntl2 = 0x000002a3,
|
||||
.genlcd_cntl3 = 0x000102aa,
|
||||
};
|
||||
|
||||
static struct w100_mode e800_lcd_mode[2] = {
|
||||
[0] = {
|
||||
.xres = 480,
|
||||
.yres = 640,
|
||||
.left_margin = 52,
|
||||
.right_margin = 148,
|
||||
.upper_margin = 2,
|
||||
.lower_margin = 6,
|
||||
.crtc_ss = 0x80350034,
|
||||
.crtc_ls = 0x802b0026,
|
||||
.crtc_gs = 0x80160016,
|
||||
.crtc_vpos_gs = 0x00020003,
|
||||
.crtc_rev = 0x0040001d,
|
||||
.crtc_dclk = 0xe0000000,
|
||||
.crtc_gclk = 0x82a50049,
|
||||
.crtc_goe = 0x80ee001c,
|
||||
.crtc_ps1_active = 0x00000000,
|
||||
.pll_freq = 128,
|
||||
.pixclk_divider = 4,
|
||||
.pixclk_divider_rotated = 6,
|
||||
.pixclk_src = CLK_SRC_PLL,
|
||||
.sysclk_divider = 0,
|
||||
.sysclk_src = CLK_SRC_PLL,
|
||||
},
|
||||
[1] = {
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.left_margin = 15,
|
||||
.right_margin = 88,
|
||||
.upper_margin = 0,
|
||||
.lower_margin = 7,
|
||||
.crtc_ss = 0xd010000f,
|
||||
.crtc_ls = 0x80070003,
|
||||
.crtc_gs = 0x80000000,
|
||||
.crtc_vpos_gs = 0x01460147,
|
||||
.crtc_rev = 0x00400003,
|
||||
.crtc_dclk = 0xa1700030,
|
||||
.crtc_gclk = 0x814b0008,
|
||||
.crtc_goe = 0x80cc0015,
|
||||
.crtc_ps1_active = 0x00000000,
|
||||
.pll_freq = 100,
|
||||
.pixclk_divider = 6, /* Wince uses 14 which gives a */
|
||||
.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
|
||||
.pixclk_src = CLK_SRC_PLL,
|
||||
.sysclk_divider = 0,
|
||||
.sysclk_src = CLK_SRC_PLL,
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
static struct w100_gpio_regs e800_w100_gpio_info = {
|
||||
.init_data1 = 0xc13fc019,
|
||||
.gpio_dir1 = 0x3e40df7f,
|
||||
.gpio_oe1 = 0x003c3000,
|
||||
.init_data2 = 0x00000000,
|
||||
.gpio_dir2 = 0x00000000,
|
||||
.gpio_oe2 = 0x00000000,
|
||||
};
|
||||
|
||||
static struct w100_mem_info e800_w100_mem_info = {
|
||||
.ext_cntl = 0x09640011,
|
||||
.sdram_mode_reg = 0x00600021,
|
||||
.ext_timing_cntl = 0x10001545,
|
||||
.io_cntl = 0x7ddd7333,
|
||||
.size = 0x1fffff,
|
||||
};
|
||||
|
||||
static void e800_tg_change(struct w100fb_par *par)
|
||||
{
|
||||
unsigned long tmp;
|
||||
|
||||
tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
|
||||
if (par->mode->xres == 480)
|
||||
tmp |= 0x100;
|
||||
else
|
||||
tmp &= ~0x100;
|
||||
w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
|
||||
}
|
||||
|
||||
static struct w100_tg_info e800_tg_info = {
|
||||
.change = e800_tg_change,
|
||||
};
|
||||
|
||||
static struct w100fb_mach_info e800_fb_info = {
|
||||
.modelist = e800_lcd_mode,
|
||||
.num_modes = 2,
|
||||
.regs = &e800_lcd_regs,
|
||||
.gpio = &e800_w100_gpio_info,
|
||||
.mem = &e800_w100_mem_info,
|
||||
.tg = &e800_tg_info,
|
||||
.xtal_freq = 16000000,
|
||||
};
|
||||
|
||||
static struct resource e800_fb_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x0c000000,
|
||||
.end = 0x0cffffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device e800_fb_device = {
|
||||
.name = "w100fb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e800_fb_info,
|
||||
},
|
||||
.num_resources = ARRAY_SIZE(e800_fb_resources),
|
||||
.resource = e800_fb_resources,
|
||||
};
|
||||
|
||||
/* --------------------------- UDC definitions --------------------------- */
|
||||
|
||||
static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
|
||||
.gpio_vbus = GPIO_E800_USB_DISC,
|
||||
.gpio_pullup = GPIO_E800_USB_PULLUP,
|
||||
.gpio_pullup_inverted = 1
|
||||
};
|
||||
|
||||
/* ----------------- e800 tc6393xb parameters ------------------ */
|
||||
|
||||
static struct tc6393xb_platform_data e800_tc6393xb_info = {
|
||||
.irq_base = IRQ_BOARD_START,
|
||||
.scr_pll2cr = 0x0cc1,
|
||||
.scr_gper = 0,
|
||||
.gpio_base = -1,
|
||||
.suspend = &eseries_tmio_suspend,
|
||||
.resume = &eseries_tmio_resume,
|
||||
.enable = &eseries_tmio_enable,
|
||||
.disable = &eseries_tmio_disable,
|
||||
};
|
||||
|
||||
static struct platform_device e800_tc6393xb_device = {
|
||||
.name = "tc6393xb",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &e800_tc6393xb_info,
|
||||
},
|
||||
.num_resources = 2,
|
||||
.resource = eseries_tmio_resources,
|
||||
};
|
||||
|
||||
/* ----------------------------------------------------------------------- */
|
||||
|
||||
static struct platform_device *e800_devices[] __initdata = {
|
||||
&e800_fb_device,
|
||||
&e800_tc6393xb_device,
|
||||
};
|
||||
|
||||
static void __init e800_init(void)
|
||||
{
|
||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
|
||||
pxa_set_ffuart_info(NULL);
|
||||
pxa_set_btuart_info(NULL);
|
||||
pxa_set_stuart_info(NULL);
|
||||
clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
|
||||
"GPIO11_CLK", NULL),
|
||||
eseries_get_tmio_gpios();
|
||||
platform_add_devices(ARRAY_AND_SIZE(e800_devices));
|
||||
pxa_set_udc_info(&e800_udc_mach_info);
|
||||
pxa_set_ac97_info(NULL);
|
||||
}
|
||||
|
||||
MACHINE_START(E800, "Toshiba e800")
|
||||
/* Maintainer: Ian Molton (spyro@f2s.com) */
|
||||
.phys_io = 0x40000000,
|
||||
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
||||
.boot_params = 0xa0000100,
|
||||
.map_io = pxa_map_io,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.fixup = eseries_fixup,
|
||||
.init_machine = e800_init,
|
||||
.timer = &pxa_timer,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user