ARM: SoC fixes for v5.8

Here are a couple of bug fixes, mostly for devicetree files
 
 NXP i.MX:
   - Use correct voltage on some i.MX8M board device trees to
     avoid hardware damage
   - Code fixes for a compiler warning and incorrect reference
     counting, both harmless.
   - Fix the i.MX8M SoC driver to correctly identify imx8mp
   - Fix watchdog configuration in imx6ul-kontron device tree.
 
 Broadcom:
   - A small regression fix for the Raspberry-Pi firmware driver
   - A Kconfig change to use the correct timer driver on Northstar
   - A DT fix for the Luxul XWC-2000 machine
   - Two more DT fixes for NSP SoCs
 
 STmicroelectronics STI
   - Revert one broken patch for L2 cache configuration
 
 ARM Versatile Express:
   - Fix a regression by reverting a broken DT cleanup
 
 TEE drivers:
   - MAINTAINERS: change tee mailing list
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl74uLEACgkQmmx57+YA
 GNnPHA/8DM6SnpONT9todCkl8NWe6SKWtjhb4hdmFyvWh2EQkau3HfTQhFsrX7N8
 1dZwPZlbyKl/np6D9MDctnk9S6LZjqUMVbJVpFbIdiBzHbD1rTE9ordBWehkymqm
 ZaxUe949QtKHgq+Duv4a3yuJUbxR8R01nyG0zsvGwWJwFYTlp/RPOoEZLK84RESK
 Kqimmg3UvjiRkaXBO+O/AqNeTUQtYyk8ru+5t2EkJW62QO/niU2107givmRikcrO
 pPfeP5hR4qtiTQGWEb2m4TWWkHlGpF0+bT2H4kzZGq99wFp1SqR46Hz+/5USCkwd
 vnIBFvJu9huQ2cQk0q9o998RAKBcg/ybG89MvuMWo5rQIy6NhXaJ6eb86yQggkei
 AnDa+mmLX4KcEi8LTI/I3n/4fHwg4tSRy+5RkzBRJBbTQQoRy9Bs3iQZhy6PE0fL
 rUm1wkNGH80nRQUOpiHxHb2PTdeGTialMAKgISqY4ltsGlSNUqneVxN1dYXytFMa
 mf7CM2ihJNe+Fyo52FFfDDt1re/A+ztbalX+oNGX8RbHlczFoZHldGYcAxGkosNE
 2MdAVWhvNR0E9nwYY8QsGN2e3IRdjnxc3hsiWPFhhHwskd1is7FDsnXdqU6qIr3I
 9HytkMhICr3cdnbqbVv/+5rTrZ89x/atQLUWJcj6PZk6WNZ/gA0=
 =P5b/
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a couple of bug fixes, mostly for devicetree files

  NXP i.MX:
   - Use correct voltage on some i.MX8M board device trees to avoid
     hardware damage
   - Code fixes for a compiler warning and incorrect reference counting,
     both harmless.
   - Fix the i.MX8M SoC driver to correctly identify imx8mp
   - Fix watchdog configuration in imx6ul-kontron device tree.

  Broadcom:
   - A small regression fix for the Raspberry-Pi firmware driver
   - A Kconfig change to use the correct timer driver on Northstar
   - A DT fix for the Luxul XWC-2000 machine
   - Two more DT fixes for NSP SoCs

  STmicroelectronics STI
   - Revert one broken patch for L2 cache configuration

  ARM Versatile Express:
   - Fix a regression by reverting a broken DT cleanup

  TEE drivers:
   - MAINTAINERS: change tee mailing list"

* tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  Revert "ARM: sti: Implement dummy L2 cache's write_sec"
  soc: imx8m: fix build warning
  ARM: imx6: add missing put_device() call in imx6q_suspend_init()
  ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
  soc: imx8m: Correct i.MX8MP UID fuse offset
  ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
  ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
  arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
  arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
  arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
  ARM: dts: NSP: Correct FA2 mailbox node
  ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
  MAINTAINERS: change tee mailing list
  ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
  ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP
  ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000
  arm: dts: vexpress: Move mcc node back into motherboard node

MAINTAINERS

@@ -12695,13 +12695,13 @@ F:	arch/mips/boot/dts/ralink/omega2p.dts
 
 OP-TEE DRIVER
 M:	Jens Wiklander <jens.wiklander@linaro.org>
-L:	tee-dev@lists.linaro.org
+L:	op-tee@lists.trustedfirmware.org
 S:	Maintained
 F:	drivers/tee/optee/
 
 OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
 M:	Sumit Garg <sumit.garg@linaro.org>
-L:	tee-dev@lists.linaro.org
+L:	op-tee@lists.trustedfirmware.org
 S:	Maintained
 F:	drivers/char/hw_random/optee-rng.c
 
@@ -16774,7 +16774,7 @@ F:	include/media/i2c/tw9910.h
 
 TEE SUBSYSTEM
 M:	Jens Wiklander <jens.wiklander@linaro.org>
-L:	tee-dev@lists.linaro.org
+L:	op-tee@lists.trustedfirmware.org
 S:	Maintained
 F:	Documentation/tee.txt
 F:	drivers/tee/

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -200,7 +200,7 @@
 			status = "disabled";
 		};
 
-		dma@20000 {
+		dma: dma@20000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x20000 0x1000>;
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
@@ -215,6 +215,8 @@
 			clocks = <&iprocslow>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
+			dma-coherent;
+			status = "disabled";
 		};
 
 		sdio: sdhci@21000 {
@@ -257,10 +259,10 @@
 			status = "disabled";
 		};
 
-		mailbox: mailbox@25000 {
+		mailbox: mailbox@25c00 {
 			compatible = "brcm,iproc-fa2-mbox";
-			reg = <0x25000 0x445>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x25c00 0x400>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;

arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};

arch/arm/boot/dts/bcm958522er.dts

@@ -58,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958525er.dts

@@ -58,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958525xmc.dts

@@ -58,6 +58,10 @@
 
 /* XHCI support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958622hr.dts

@@ -58,6 +58,10 @@
 
 /* USB 3 and SLIC support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958623hr.dts

@@ -58,6 +58,10 @@
 
 /* USB 3 and SLIC support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958625hr.dts

@@ -69,6 +69,10 @@
 	status = "okay";
 };
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958625k.dts

@@ -48,6 +48,10 @@
 	};
 };
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi

@@ -232,13 +232,6 @@
 	status = "okay";
 };
 
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
 &iomuxc {
 	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
 
@@ -409,10 +402,4 @@
 			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
 		>;
 	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY	0x30b0
-		>;
-	};
 };

arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi

@@ -57,6 +57,13 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_reset_out>;
@@ -106,4 +113,10 @@
 			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
 		>;
 	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
+		>;
+	};
 };

arch/arm/boot/dts/vexpress-v2m-rs1.dtsi

@@ -100,79 +100,6 @@
 		};
 	};
 
-	mcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		oscclk0 {
-			/* MCC static memory clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <25000000 60000000>;
-			#clock-cells = <0>;
-			clock-output-names = "v2m:oscclk0";
-		};
-
-		v2m_oscclk1: oscclk1 {
-			/* CLCD clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <23750000 65000000>;
-			#clock-cells = <0>;
-			clock-output-names = "v2m:oscclk1";
-		};
-
-		v2m_oscclk2: oscclk2 {
-			/* IO FPGA peripheral clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <24000000 24000000>;
-			#clock-cells = <0>;
-			clock-output-names = "v2m:oscclk2";
-		};
-
-		volt-vio {
-			/* Logic level voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 0>;
-			regulator-name = "VIO";
-			regulator-always-on;
-			label = "VIO";
-		};
-
-		temp-mcc {
-			/* MCC internal operating temperature */
-			compatible = "arm,vexpress-temp";
-			arm,vexpress-sysreg,func = <4 0>;
-			label = "MCC";
-		};
-
-		reset {
-			compatible = "arm,vexpress-reset";
-			arm,vexpress-sysreg,func = <5 0>;
-		};
-
-		muxfpga {
-			compatible = "arm,vexpress-muxfpga";
-			arm,vexpress-sysreg,func = <7 0>;
-		};
-
-		shutdown {
-			compatible = "arm,vexpress-shutdown";
-			arm,vexpress-sysreg,func = <8 0>;
-		};
-
-		reboot {
-			compatible = "arm,vexpress-reboot";
-			arm,vexpress-sysreg,func = <9 0>;
-		};
-
-		dvimode {
-			compatible = "arm,vexpress-dvimode";
-			arm,vexpress-sysreg,func = <11 0>;
-		};
-	};
-
 	bus@8000000 {
 		motherboard-bus {
 			model = "V2M-P1";
@@ -435,6 +362,79 @@
 						};
 					};
 				};
+
+				mcc {
+					compatible = "arm,vexpress,config-bus";
+					arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+					oscclk0 {
+						/* MCC static memory clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 0>;
+						freq-range = <25000000 60000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk0";
+					};
+
+					v2m_oscclk1: oscclk1 {
+						/* CLCD clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 1>;
+						freq-range = <23750000 65000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk1";
+					};
+
+					v2m_oscclk2: oscclk2 {
+						/* IO FPGA peripheral clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 2>;
+						freq-range = <24000000 24000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk2";
+					};
+
+					volt-vio {
+						/* Logic level voltage */
+						compatible = "arm,vexpress-volt";
+						arm,vexpress-sysreg,func = <2 0>;
+						regulator-name = "VIO";
+						regulator-always-on;
+						label = "VIO";
+					};
+
+					temp-mcc {
+						/* MCC internal operating temperature */
+						compatible = "arm,vexpress-temp";
+						arm,vexpress-sysreg,func = <4 0>;
+						label = "MCC";
+					};
+
+					reset {
+						compatible = "arm,vexpress-reset";
+						arm,vexpress-sysreg,func = <5 0>;
+					};
+
+					muxfpga {
+						compatible = "arm,vexpress-muxfpga";
+						arm,vexpress-sysreg,func = <7 0>;
+					};
+
+					shutdown {
+						compatible = "arm,vexpress-shutdown";
+						arm,vexpress-sysreg,func = <8 0>;
+					};
+
+					reboot {
+						compatible = "arm,vexpress-reboot";
+						arm,vexpress-sysreg,func = <9 0>;
+					};
+
+					dvimode {
+						compatible = "arm,vexpress-dvimode";
+						arm,vexpress-sysreg,func = <11 0>;
+					};
+				};
 			};
 		};
 	};

arch/arm/mach-bcm/Kconfig

@@ -53,6 +53,7 @@ config ARCH_BCM_NSP
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_ERRATA_764369 if SMP
+	select ARM_TIMER_SP804
 	select THERMAL
 	select THERMAL_OF
 	help

arch/arm/mach-imx/pm-imx5.c

@@ -295,14 +295,14 @@ static int __init imx_suspend_alloc_ocram(
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, size);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -312,6 +312,8 @@ static int __init imx_suspend_alloc_ocram(
 	if (virt_out)
 		*virt_out = virt;
 
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(node);
 

arch/arm/mach-imx/pm-imx6.c

@@ -493,14 +493,14 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -523,7 +523,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 	ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
 	if (ret) {
 		pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
-		goto put_node;
+		goto put_device;
 	}
 
 	ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
@@ -570,7 +570,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 		&imx6_suspend,
 		MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
 
-	goto put_node;
+	goto put_device;
 
 pl310_cache_map_failed:
 	iounmap(pm_info->gpc_base.vbase);
@@ -580,6 +580,8 @@ iomuxc_map_failed:
 	iounmap(pm_info->src_base.vbase);
 src_map_failed:
 	iounmap(pm_info->mmdc_base.vbase);
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(node);
 

arch/arm/mach-sti/board-dt.c

@@ -20,14 +20,6 @@ static const char *const stih41x_dt_match[] __initconst = {
 	NULL
 };
 
-static void sti_l2_write_sec(unsigned long val, unsigned reg)
-{
-	/*
-	 * We can't write to secure registers as we are in non-secure
-	 * mode, until we have some SMI service available.
-	 */
-}
-
 DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
 	.dt_compat	= stih41x_dt_match,
 	.l2c_aux_val	= L2C_AUX_CTRL_SHARED_OVERRIDE |
@@ -36,5 +28,4 @@ DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
 			  L2C_AUX_CTRL_WAY_SIZE(4),
 	.l2c_aux_mask	= 0xc0000fff,
 	.smp		= smp_ops(sti_smp_ops),
-	.l2c_write_sec	= sti_l2_write_sec,
 MACHINE_END

arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi

@@ -136,7 +136,7 @@
 
 			ldo1_reg: LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <3000000>;
+				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -144,7 +144,7 @@
 
 			ldo2_reg: LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;

arch/arm64/boot/dts/freescale/imx8mm-evk.dts

@@ -208,7 +208,7 @@
 
 			ldo1_reg: LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <3000000>;
+				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -216,7 +216,7 @@
 
 			ldo2_reg: LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;

arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts

@@ -113,7 +113,7 @@
 
 			ldo1_reg: LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <3000000>;
+				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -121,7 +121,7 @@
 
 			ldo2_reg: LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;

drivers/firmware/raspberrypi.c

@@ -181,6 +181,7 @@ EXPORT_SYMBOL_GPL(rpi_firmware_property);
 static void
 rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
 {
+	time64_t date_and_time;
 	u32 packet;
 	int ret = rpi_firmware_property(fw,
 					RPI_FIRMWARE_GET_FIRMWARE_REVISION,
@@ -189,7 +190,9 @@ rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
 	if (ret)
 		return;
 
-	dev_info(fw->cl.dev, "Attached to firmware from %ptT\n", &packet);
+	/* This is not compatible with y2038 */
+	date_and_time = packet;
+	dev_info(fw->cl.dev, "Attached to firmware from %ptT\n", &date_and_time);
 }
 
 static void

drivers/soc/imx/soc-imx8m.c

@@ -22,6 +22,8 @@
 #define OCOTP_UID_LOW			0x410
 #define OCOTP_UID_HIGH			0x420
 
+#define IMX8MP_OCOTP_UID_OFFSET		0x10
+
 /* Same as ANADIG_DIGPROG_IMX7D */
 #define ANADIG_DIGPROG_IMX8MM	0x800
 
@@ -87,6 +89,8 @@ static void __init imx8mm_soc_uid(void)
 {
 	void __iomem *ocotp_base;
 	struct device_node *np;
+	u32 offset = of_machine_is_compatible("fsl,imx8mp") ?
+		     IMX8MP_OCOTP_UID_OFFSET : 0;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-ocotp");
 	if (!np)
@@ -95,9 +99,9 @@ static void __init imx8mm_soc_uid(void)
 	ocotp_base = of_iomap(np, 0);
 	WARN_ON(!ocotp_base);
 
-	soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
+	soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH + offset);
 	soc_uid <<= 32;
-	soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
+	soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW + offset);
 
 	iounmap(ocotp_base);
 	of_node_put(np);
@@ -146,7 +150,7 @@ static const struct imx8_soc_data imx8mp_soc_data = {
 	.soc_revision = imx8mm_soc_revision,
 };
 
-static const struct of_device_id imx8_soc_match[] = {
+static __maybe_unused const struct of_device_id imx8_soc_match[] = {
 	{ .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, },
 	{ .compatible = "fsl,imx8mm", .data = &imx8mm_soc_data, },
 	{ .compatible = "fsl,imx8mn", .data = &imx8mn_soc_data, },