From e3b89080f2c50936a9f6eccedb1e07e293777f0a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 28 Sep 2016 13:38:18 +0300 Subject: [PATCH] usb: host: ehci: make use of new usb_endpoint_maxp_mult() We have introduced a helper to calculate multiplier value from wMaxPacketSize. Start using it. Cc: Alan Stern Cc: Signed-off-by: Felipe Balbi --- drivers/usb/host/ehci-q.c | 10 ++++++---- drivers/usb/host/ehci-sched.c | 2 +- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index eca3710d8fc4..a45a5dc7ed9f 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -550,8 +550,6 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) /*-------------------------------------------------------------------------*/ -// high bandwidth multiplier, as encoded in highspeed endpoint descriptors -#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) // ... and packet size, for any kind of endpoint descriptor #define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) @@ -770,9 +768,11 @@ qh_make ( gfp_t flags ) { struct ehci_qh *qh = ehci_qh_alloc (ehci, flags); + struct usb_host_endpoint *ep; u32 info1 = 0, info2 = 0; int is_input, type; int maxp = 0; + int mult; struct usb_tt *tt = urb->dev->tt; struct ehci_qh_hw *hw; @@ -787,7 +787,9 @@ qh_make ( is_input = usb_pipein (urb->pipe); type = usb_pipetype (urb->pipe); + ep = usb_pipe_endpoint (urb->dev, urb->pipe); maxp = usb_maxpacket (urb->dev, urb->pipe, !is_input); + mult = usb_endpoint_maxp_mult (&ep->desc); /* 1024 byte maxpacket is a hardware ceiling. High bandwidth * acts like up to 3KB, but is built from smaller packets. @@ -810,7 +812,7 @@ qh_make ( qh->ps.usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH, is_input, 0, - hb_mult(maxp) * max_packet(maxp))); + mult * max_packet(maxp))); qh->ps.phase = NO_FRAME; if (urb->dev->speed == USB_SPEED_HIGH) { @@ -929,7 +931,7 @@ qh_make ( info2 |= (EHCI_TUNE_MULT_HS << 30); } else { /* PIPE_INTERRUPT */ info1 |= max_packet (maxp) << 16; - info2 |= hb_mult (maxp) << 30; + info2 |= mult << 30; } break; default: diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 1dfe54f14737..6a9fa2c3a24e 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1064,7 +1064,7 @@ iso_stream_init( /* knows about ITD vs SITD */ if (dev->speed == USB_SPEED_HIGH) { - unsigned multi = hb_mult(maxp); + unsigned multi = usb_endpoint_maxp_mult(&urb->ep->desc); stream->highspeed = 1;