korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-11 12:28:41 +08:00
Code Issues Packages Projects Releases Wiki Activity

Base Au1200 2.6 support.

Browse Source 
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Pete Popov 2005-03-01 06:33:16 +00:00 committed by Ralf Baechle
parent 784f7b9d89
commit e3ad1c23ba
21 changed files with 1797 additions and 183 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
arch/mips/Kconfig
View File

@ -642,6 +642,10 @@ config SGI_IP32
help
If you want this kernel to run on SGI O2 workstation, say Y here.
config SOC_AU1200
bool
select SOC_AU1X00
config SOC_AU1X00
bool "Support for AMD/Alchemy Au1X00 SOCs"
select SYS_SUPPORTS_32BIT_KERNEL
@ -702,6 +706,13 @@ config MIPS_PB1550
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
config MIPS_PB1200
bool "AMD Alchemy PB1200 board"
select SOC_AU1200
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_DB1000
bool "DB1000 board"
depends on SOC_AU1000
@ -732,6 +743,13 @@ config MIPS_BOSPORUS
depends on SOC_AU1500
select DMA_NONCOHERENT
config MIPS_DB1200
bool "AMD Alchemy DB1200 board"
select SOC_AU1200
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_MIRAGE
bool "Mirage board"
depends on SOC_AU1500

14
arch/mips/Makefile
View File

@ -265,6 +265,13 @@ libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/
cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000
#
# AMD Alchemy Pb1200 eval board
#
libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/
cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000
#
# AMD Alchemy Db1000 eval board
#
@ -293,6 +300,13 @@ libs-$(CONFIG_MIPS_DB1550) += arch/mips/au1000/db1x00/
cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00
load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000
#
# AMD Alchemy Db1200 eval board
#
libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/
cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00
load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000
#
# AMD Alchemy Bosporus eval board
#

32
arch/mips/au1000/common/au1xxx_irqmap.c
View File

@ -173,14 +173,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
@ -201,14 +201,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},

3
arch/mips/au1000/common/cputable.c
View File

@ -37,7 +37,8 @@ struct cpu_spec cpu_specs[] = {
{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
{ 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 },
{ 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
{ 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 },
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
};

298
arch/mips/au1000/common/dbdma.c
View File

@ -29,6 +29,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@ -42,6 +43,8 @@
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/system.h>
/* #include <linux/module.h> */
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
/*
@ -55,43 +58,16 @@
* functions. The drivers allocate the data buffers and assign them
* to the descriptors.
*/
static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
static spinlock_t au1xxx_dbdma_spin_lock = SPIN_LOCK_UNLOCKED;
/* I couldn't find a macro that did this......
*/
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
static int dbdma_initialized;
static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
static int dbdma_initialized=0;
static void au1xxx_dbdma_init(void);
typedef struct dbdma_device_table {
u32 dev_id;
u32 dev_flags;
u32 dev_tsize;
u32 dev_devwidth;
u32 dev_physaddr; /* If FIFO */
u32 dev_intlevel;
u32 dev_intpolarity;
} dbdev_tab_t;
typedef struct dbdma_chan_config {
u32 chan_flags;
u32 chan_index;
dbdev_tab_t *chan_src;
dbdev_tab_t *chan_dest;
au1x_dma_chan_t *chan_ptr;
au1x_ddma_desc_t *chan_desc_base;
au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
void *chan_callparam;
void (*chan_callback)(int, void *, struct pt_regs *);
} chan_tab_t;
#define DEV_FLAGS_INUSE (1 << 0)
#define DEV_FLAGS_ANYUSE (1 << 1)
#define DEV_FLAGS_OUT (1 << 2)
#define DEV_FLAGS_IN (1 << 3)
static dbdev_tab_t dbdev_tab[] = {
#ifdef CONFIG_SOC_AU1550
/* UARTS */
@ -157,13 +133,13 @@ static dbdev_tab_t dbdev_tab[] = {
{ DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
{ DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
{ DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
{ DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
{ DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
{ DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
{ DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
{ DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
@ -173,9 +149,9 @@ static dbdev_tab_t dbdev_tab[] = {
{ DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
{ DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
{ DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
{ DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
{ DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
@ -184,6 +160,24 @@ static dbdev_tab_t dbdev_tab[] = {
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
/* Provide 16 user definable device types */
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
};
#define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t))
@ -203,6 +197,30 @@ find_dbdev_id (u32 id)
return NULL;
}
u32
au1xxx_ddma_add_device(dbdev_tab_t *dev)
{
u32 ret = 0;
dbdev_tab_t *p=NULL;
static u16 new_id=0x1000;
p = find_dbdev_id(0);
if ( NULL != p )
{
memcpy(p, dev, sizeof(dbdev_tab_t));
p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
ret = p->dev_id;
new_id++;
#if 0
printk("add_device: id:%x flags:%x padd:%x\n",
p->dev_id, p->dev_flags, p->dev_physaddr );
#endif
}
return ret;
}
EXPORT_SYMBOL(au1xxx_ddma_add_device);
/* Allocate a channel and return a non-zero descriptor if successful.
*/
u32
@ -215,7 +233,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
int i;
dbdev_tab_t *stp, *dtp;
chan_tab_t *ctp;
volatile au1x_dma_chan_t *cp;
au1x_dma_chan_t *cp;
/* We do the intialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
@ -225,9 +243,6 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
au1xxx_dbdma_init();
dbdma_initialized = 1;
if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS))
return 0;
if ((stp = find_dbdev_id(srcid)) == NULL) return 0;
if ((dtp = find_dbdev_id(destid)) == NULL) return 0;
@ -269,9 +284,9 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
/* If kmalloc fails, it is caught below same
* as a channel not available.
*/
ctp = kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
ctp = (chan_tab_t *)
kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
chan_tab_ptr[i] = ctp;
ctp->chan_index = chan = i;
break;
}
}
@ -279,10 +294,11 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
if (ctp != NULL) {
memset(ctp, 0, sizeof(chan_tab_t));
ctp->chan_index = chan = i;
dcp = DDMA_CHANNEL_BASE;
dcp += (0x0100 * chan);
ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
cp = (volatile au1x_dma_chan_t *)dcp;
cp = (au1x_dma_chan_t *)dcp;
ctp->chan_src = stp;
ctp->chan_dest = dtp;
ctp->chan_callback = callback;
@ -299,6 +315,9 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
i |= DDMA_CFG_DED;
if (dtp->dev_intpolarity)
i |= DDMA_CFG_DP;
if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
(dtp->dev_flags & DEV_FLAGS_SYNC))
i |= DDMA_CFG_SYNC;
cp->ddma_cfg = i;
au_sync();
@ -309,14 +328,14 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
rv = (u32)(&chan_tab_ptr[chan]);
}
else {
/* Release devices.
*/
/* Release devices */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
}
}
return rv;
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
/* Set the device width if source or destination is a FIFO.
* Should be 8, 16, or 32 bits.
@ -344,6 +363,7 @@ au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
return rv;
}
EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
/* Allocate a descriptor ring, initializing as much as possible.
*/
@ -370,7 +390,8 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
* and if we try that first we are likely to not waste larger
* slabs of memory.
*/
desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL);
desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
GFP_KERNEL|GFP_DMA);
if (desc_base == 0)
return 0;
@ -381,7 +402,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
kfree((const void *)desc_base);
i = entries * sizeof(au1x_ddma_desc_t);
i += (sizeof(au1x_ddma_desc_t) - 1);
if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0)
if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
return 0;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
@ -461,9 +482,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
/* If source input is fifo, set static address.
*/
if (stp->dev_flags & DEV_FLAGS_IN) {
src0 = stp->dev_physaddr;
if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
else
src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
}
if (stp->dev_physaddr)
src0 = stp->dev_physaddr;
/* Set up dest1. For now, assume no stride and increment.
* A channel attribute update can change this later.
@ -487,10 +513,18 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
/* If destination output is fifo, set static address.
*/
if (dtp->dev_flags & DEV_FLAGS_OUT) {
dest0 = dtp->dev_physaddr;
if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
else
dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
}
if (dtp->dev_physaddr)
dest0 = dtp->dev_physaddr;
#if 0
printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
#endif
for (i=0; i<entries; i++) {
dp->dscr_cmd0 = cmd0;
dp->dscr_cmd1 = cmd1;
@ -499,6 +533,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
dp->dscr_dest0 = dest0;
dp->dscr_dest1 = dest1;
dp->dscr_stat = 0;
dp->sw_context = dp->sw_status = 0;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
dp++;
}
@ -511,13 +546,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
return (u32)(ctp->chan_desc_base);
}
EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
/* Put a source buffer into the DMA ring.
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
u32
au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@ -544,24 +580,40 @@ au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
*/
dp->dscr_source0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
ctp->chan_ptr->ddma_dbell = 0xffffffff; /* Make it go */
/* Check flags */
if (flags & DDMA_FLAGS_IE)
dp->dscr_cmd0 |= DSCR_CMD0_IE;
if (flags & DDMA_FLAGS_NOIE)
dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
/* Get next descriptor pointer.
*/
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
/*
* There is an errata on the Au1200/Au1550 parts that could result
* in "stale" data being DMA'd. It has to do with the snoop logic on
* the dache eviction buffer. NONCOHERENT_IO is on by default for
* these parts. If it is fixedin the future, these dma_cache_inv will
* just be nothing more than empty macros. See io.h.
* */
dma_cache_wback_inv(buf,nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv(dp, sizeof(dp));
ctp->chan_ptr->ddma_dbell = 0;
/* return something not zero.
*/
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
/* Put a destination buffer into the DMA ring.
* This updates the destination pointer and byte count. Normally used
* to place an empty buffer into the ring for fifo to memory transfers.
*/
u32
au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@ -583,11 +635,33 @@ au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
/* Load up buffer address and byte count.
*/
/* Load up buffer address and byte count */
/* Check flags */
if (flags & DDMA_FLAGS_IE)
dp->dscr_cmd0 |= DSCR_CMD0_IE;
if (flags & DDMA_FLAGS_NOIE)
dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
dp->dscr_dest0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
#if 0
printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
#endif
/*
* There is an errata on the Au1200/Au1550 parts that could result in
* "stale" data being DMA'd. It has to do with the snoop logic on the
* dache eviction buffer. NONCOHERENT_IO is on by default for these
* parts. If it is fixedin the future, these dma_cache_inv will just
* be nothing more than empty macros. See io.h.
* */
dma_cache_inv(buf,nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv(dp, sizeof(dp));
ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer.
*/
@ -597,6 +671,7 @@ au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
*/
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
/* Get a destination buffer into the DMA ring.
* Normally used to get a full buffer from the ring during fifo
@ -646,7 +721,7 @@ void
au1xxx_dbdma_stop(u32 chanid)
{
chan_tab_t *ctp;
volatile au1x_dma_chan_t *cp;
au1x_dma_chan_t *cp;
int halt_timeout = 0;
ctp = *((chan_tab_t **)chanid);
@ -666,6 +741,7 @@ au1xxx_dbdma_stop(u32 chanid)
cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
au_sync();
}
EXPORT_SYMBOL(au1xxx_dbdma_stop);
/* Start using the current descriptor pointer. If the dbdma encounters
* a not valid descriptor, it will stop. In this case, we can just
@ -675,17 +751,17 @@ void
au1xxx_dbdma_start(u32 chanid)
{
chan_tab_t *ctp;
volatile au1x_dma_chan_t *cp;
au1x_dma_chan_t *cp;
ctp = *((chan_tab_t **)chanid);
cp = ctp->chan_ptr;
cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */
au_sync();
cp->ddma_dbell = 0xffffffff; /* Make it go */
cp->ddma_dbell = 0;
au_sync();
}
EXPORT_SYMBOL(au1xxx_dbdma_start);
void
au1xxx_dbdma_reset(u32 chanid)
@ -704,15 +780,21 @@ au1xxx_dbdma_reset(u32 chanid)
do {
dp->dscr_cmd0 &= ~DSCR_CMD0_V;
/* reset our SW status -- this is used to determine
* if a descriptor is in use by upper level SW. Since
* posting can reset 'V' bit.
*/
dp->sw_status = 0;
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
EXPORT_SYMBOL(au1xxx_dbdma_reset);
u32
au1xxx_get_dma_residue(u32 chanid)
{
chan_tab_t *ctp;
volatile au1x_dma_chan_t *cp;
au1x_dma_chan_t *cp;
u32 rv;
ctp = *((chan_tab_t **)chanid);
@ -747,15 +829,16 @@ au1xxx_dbdma_chan_free(u32 chanid)
kfree(ctp);
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
static irqreturn_t
static void
dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
u32 intstat;
u32 intstat, flags;
u32 chan_index;
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
volatile au1x_dma_chan_t *cp;
au1x_dma_chan_t *cp;
intstat = dbdma_gptr->ddma_intstat;
au_sync();
@ -774,19 +857,26 @@ dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
(ctp->chan_callback)(irq, ctp->chan_callparam, regs);
ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
return IRQ_HANDLED;
}
static void
au1xxx_dbdma_init(void)
static void au1xxx_dbdma_init(void)
{
int irq_nr;
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT,
#if defined(CONFIG_SOC_AU1550)
irq_nr = AU1550_DDMA_INT;
#elif defined(CONFIG_SOC_AU1200)
irq_nr = AU1200_DDMA_INT;
#else
#error Unknown Au1x00 SOC
#endif
if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT,
"Au1xxx dbdma", (void *)dbdma_gptr))
printk("Can't get 1550 dbdma irq");
}
@ -797,7 +887,8 @@ au1xxx_dbdma_dump(u32 chanid)
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
dbdev_tab_t *stp, *dtp;
volatile au1x_dma_chan_t *cp;
au1x_dma_chan_t *cp;
u32 i = 0;
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
@ -822,15 +913,64 @@ au1xxx_dbdma_dump(u32 chanid)
dp = ctp->chan_desc_base;
do {
printk("dp %08x, cmd0 %08x, cmd1 %08x\n",
(u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
printk("src0 %08x, src1 %08x, dest0 %08x\n",
dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0);
printk("dest1 %08x, stat %08x, nxtptr %08x\n",
dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr);
printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
printk("stat %08x, nxtptr %08x\n",
dp->dscr_stat, dp->dscr_nxtptr);
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
/* Put a descriptor into the DMA ring.
* This updates the source/destination pointers and byte count.
*/
u32
au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
u32 nbytes=0;
/* I guess we could check this to be within the
* range of the table......
*/
ctp = *((chan_tab_t **)chanid);
/* We should have multiple callers for a particular channel,
* an interrupt doesn't affect this pointer nor the descriptor,
* so no locking should be needed.
*/
dp = ctp->put_ptr;
/* If the descriptor is valid, we are way ahead of the DMA
* engine, so just return an error condition.
*/
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
/* Load up buffer addresses and byte count.
*/
dp->dscr_dest0 = dscr->dscr_dest0;
dp->dscr_source0 = dscr->dscr_source0;
dp->dscr_dest1 = dscr->dscr_dest1;
dp->dscr_source1 = dscr->dscr_source1;
dp->dscr_cmd1 = dscr->dscr_cmd1;
nbytes = dscr->dscr_cmd1;
/* Allow the caller to specifiy if an interrupt is generated */
dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer.
*/
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
/* return something not zero.
*/
return nbytes;
}
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */

4
arch/mips/au1000/common/irq.c
View File

@ -488,7 +488,7 @@ void intc0_req0_irqdispatch(struct pt_regs *regs)
intc0_req0 |= au_readl(IC0_REQ0INT);
if (!intc0_req0) return;
#ifdef AU1000_USB_DEV_REQ_INT
/*
* Because of the tight timing of SETUP token to reply
* transactions, the USB devices-side packet complete
@ -499,7 +499,7 @@ void intc0_req0_irqdispatch(struct pt_regs *regs)
do_IRQ(AU1000_USB_DEV_REQ_INT, regs);
return;
}
#endif
irq = au_ffs(intc0_req0) - 1;
intc0_req0 &= ~(1<<irq);
do_IRQ(irq, regs);

12
arch/mips/au1000/common/usbdev.c
View File

@ -1005,11 +1005,11 @@ process_ep0_receive (struct usb_dev* dev)
#endif
dev->ep0_stage = SETUP_STAGE;
break;
}
}
spin_unlock(&ep0->lock);
// we're done processing the packet, free it
kfree(pkt);
// we're done processing the packet, free it
kfree(pkt);
}
@ -1072,8 +1072,7 @@ dma_done_ep0_intr(int irq, void *dev_id, struct pt_regs *regs)
clear_dma_done1(ep0->indma);
pkt = send_packet_complete(ep0);
if (pkt)
kfree(pkt);
kfree(pkt);
}
/*
@ -1302,8 +1301,7 @@ usbdev_exit(void)
endpoint_flush(ep);
}
if (usbdev.full_conf_desc)
kfree(usbdev.full_conf_desc);
kfree(usbdev.full_conf_desc);
}
int

5
arch/mips/au1000/pb1200/Makefile Normal file
View File

@ -0,0 +1,5 @@
#
# Makefile for the Alchemy Semiconductor PB1200 board.
#
lib-y := init.o board_setup.o irqmap.o

187
arch/mips/au1000/pb1200/board_setup.c Normal file
View File

@ -0,0 +1,187 @@
/*
*
* BRIEF MODULE DESCRIPTION
* Alchemy Pb1200/Db1200 board setup.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/mc146818rtc.h>
#include <linux/delay.h>
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
#include <linux/ide.h>
#endif
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#ifdef CONFIG_MIPS_PB1200
#include <asm/mach-pb1x00/pb1200.h>
#endif
#ifdef CONFIG_MIPS_DB1200
#include <asm/mach-db1x00/db1200.h>
#define PB1200_ETH_INT DB1200_ETH_INT
#define PB1200_IDE_INT DB1200_IDE_INT
#endif
extern void _board_init_irq(void);
extern void (*board_init_irq)(void);
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX
extern struct ide_ops *ide_ops;
extern struct ide_ops au1xxx_ide_ops;
extern u32 au1xxx_ide_virtbase;
extern u64 au1xxx_ide_physbase;
extern int au1xxx_ide_irq;
u32 led_base_addr;
/* Ddma */
chan_tab_t *ide_read_ch, *ide_write_ch;
u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma
dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 };
#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */
void board_reset (void)
{
bcsr->resets = 0;
}
void __init board_setup(void)
{
char *argptr = NULL;
u32 pin_func;
#if 0
/* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
au_sync();
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
au_sync();
#endif
#if defined( CONFIG_I2C_ALGO_AU1550 )
{
u32 freq0, clksrc;
/* Select SMBUS in CPLD */
bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
pin_func = au_readl(SYS_PINFUNC);
au_sync();
pin_func &= ~(3<<17 | 1<<4);
/* Set GPIOs correctly */
pin_func |= 2<<17;
au_writel(pin_func, SYS_PINFUNC);
au_sync();
/* The i2c driver depends on 50Mhz clock */
freq0 = au_readl(SYS_FREQCTRL0);
au_sync();
freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
freq0 |= (3<<SYS_FC_FRDIV1_BIT);
/* 396Mhz / (3+1)*2 == 49.5Mhz */
au_writel(freq0, SYS_FREQCTRL0);
au_sync();
freq0 |= SYS_FC_FE1;
au_writel(freq0, SYS_FREQCTRL0);
au_sync();
clksrc = au_readl(SYS_CLKSRC);
au_sync();
clksrc &= ~0x01f00000;
/* bit 22 is EXTCLK0 for PSC0 */
clksrc |= (0x3 << 22);
au_writel(clksrc, SYS_CLKSRC);
au_sync();
}
#endif
#ifdef CONFIG_FB_AU1200
argptr = prom_getcmdline();
#ifdef CONFIG_MIPS_PB1200
strcat(argptr, " video=au1200fb:panel:s11");
#endif
#ifdef CONFIG_MIPS_DB1200
strcat(argptr, " video=au1200fb:panel:s7");
#endif
#endif
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
/*
* Iniz IDE parameters
*/
ide_ops = &au1xxx_ide_ops;
au1xxx_ide_irq = PB1200_IDE_INT;
au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR;
au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR);
/*
* change PIO or PIO+Ddma
* check the GPIO-5 pin condition. pb1200:s18_dot */
switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 5)) ? 1 : 0;
#endif
/* The Pb1200 development board uses external MUX for PSC0 to
support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
*/
#if defined(CONFIG_AU1550_PSC_SPI) && defined(CONFIG_I2C_ALGO_AU1550)
#error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
Refer to Pb1200/Db1200 documentation.
#elif defined( CONFIG_AU1550_PSC_SPI )
bcsr->resets |= BCSR_RESETS_PCS0MUX;
#elif defined( CONFIG_I2C_ALGO_AU1550 )
bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
#endif
au_sync();
#ifdef CONFIG_MIPS_PB1200
printk("AMD Alchemy Pb1200 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1200
printk("AMD Alchemy Db1200 Board\n");
#endif
#if 0
/* Setup Pb1200 External Interrupt Controller */
{
extern void (*board_init_irq)(void);
extern void _board_init_irq(void);
board_init_irq = _board_init_irq;
}
#endif
}

69
arch/mips/au1000/pb1200/init.c Normal file
View File

@ -0,0 +1,69 @@
/*
*
* BRIEF MODULE DESCRIPTION
* PB1200 board setup
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/string.h>
#include <linux/kernel.h>
int prom_argc;
char **prom_argv, **prom_envp;
extern void __init prom_init_cmdline(void);
extern char *prom_getenv(char *envname);
const char *get_system_type(void)
{
return "Alchemy Pb1200";
}
void __init prom_init(void)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = (int) fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_PB1200;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str) {
memsize = 0x08000000;
} else {
memsize = simple_strtol(memsize_str, NULL, 0);
}
add_memory_region(0, memsize, BOOT_MEM_RAM);
}

180
arch/mips/au1000/pb1200/irqmap.c Normal file
View File

@ -0,0 +1,180 @@
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/delay.h>
#include <asm/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_PB1200
#include <asm/mach-pb1x00/pb1200.h>
#endif
#ifdef CONFIG_MIPS_DB1200
#include <asm/mach-db1x00/db1200.h>
#define PB1200_INT_BEGIN DB1200_INT_BEGIN
#define PB1200_INT_END DB1200_INT_END
#endif
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
/*
* Support for External interrupts on the PbAu1200 Development platform.
*/
static volatile int pb1200_cascade_en=0;
void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
{
unsigned short bisr = bcsr->int_status;
int extirq_nr = 0;
/* Clear all the edge interrupts. This has no effect on level */
bcsr->int_status = bisr;
for( ; bisr; bisr &= (bisr-1) )
{
extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr);
/* Ack and dispatch IRQ */
do_IRQ(extirq_nr,regs);
}
}
inline void pb1200_enable_irq(unsigned int irq_nr)
{
bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
}
inline void pb1200_disable_irq(unsigned int irq_nr)
{
bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
}
static unsigned int pb1200_startup_irq( unsigned int irq_nr )
{
if (++pb1200_cascade_en == 1)
{
request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
0, "Pb1200 Cascade", &pb1200_cascade_handler );
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev3. Enable a workaround */
if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
{
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
printk("updated to latest revision. This software will not\n");
printk("work on anything less than CPLD rev4\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
while(1);
}
#endif
}
pb1200_enable_irq(irq_nr);
return 0;
}
static void pb1200_shutdown_irq( unsigned int irq_nr )
{
pb1200_disable_irq(irq_nr);
if (--pb1200_cascade_en == 0)
{
free_irq(AU1000_GPIO_7,&pb1200_cascade_handler );
}
return;
}
static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr)
{
pb1200_disable_irq( irq_nr );
}
static void pb1200_end_irq(unsigned int irq_nr)
{
if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
pb1200_enable_irq(irq_nr);
}
}
static struct hw_interrupt_type external_irq_type =
{
#ifdef CONFIG_MIPS_PB1200
"Pb1200 Ext",
#endif
#ifdef CONFIG_MIPS_DB1200
"Db1200 Ext",
#endif
pb1200_startup_irq,
pb1200_shutdown_irq,
pb1200_enable_irq,
pb1200_disable_irq,
pb1200_mask_and_ack_irq,
pb1200_end_irq,
NULL
};
void _board_init_irq(void)
{
int irq_nr;
for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
{
irq_desc[irq_nr].handler = &external_irq_type;
pb1200_disable_irq(irq_nr);
}
/* GPIO_7 can not be hooked here, so it is hooked upon first
request of any source attached to the cascade */
}

5
arch/mips/kernel/cpu-probe.c
View File

@ -116,6 +116,8 @@ static inline void check_wait(void)
case CPU_AU1000:
case CPU_AU1100:
case CPU_AU1500:
case CPU_AU1550:
case CPU_AU1200:
if (au1k_wait_ptr != NULL) {
cpu_wait = au1k_wait_ptr;
printk(" available.\n");
@ -505,6 +507,9 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c)
case 3:
c->cputype = CPU_AU1550;
break;
case 4:
c->cputype = CPU_AU1200;
break;
default:
panic("Unknown Au Core!");
break;

3
arch/mips/kernel/proc.c
View File

@ -60,6 +60,9 @@ static const char *cpu_name[] = {
[CPU_TX3927] "TX3927",
[CPU_AU1000] "Au1000",
[CPU_AU1500] "Au1500",
[CPU_AU1100] "Au1100",
[CPU_AU1550] "Au1550",
[CPU_AU1200] "Au1200",
[CPU_4KEC] "MIPS 4KEc",
[CPU_4KSC] "MIPS 4KSc",
[CPU_VR41XX] "NEC Vr41xx",

4
arch/mips/mm/c-r4k.c
View File

@ -1036,7 +1036,11 @@ static void __init probe_pcache(void)
c->icache.flags |= MIPS_CACHE_VTAG;
break;
case CPU_AU1000:
case CPU_AU1500:
case CPU_AU1100:
case CPU_AU1550:
case CPU_AU1200:
c->icache.flags |= MIPS_CACHE_IC_F_DC;
break;
}

1
arch/mips/mm/tlbex.c
View File

@ -840,6 +840,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
case CPU_AU1100:
case CPU_AU1500:
case CPU_AU1550:
case CPU_AU1200:
i_nop(p);
tlbw(p);
break;

2
include/asm-mips/bootinfo.h
View File

@ -177,6 +177,8 @@
#define MACH_MTX1 7 /* 4G MTX-1 Au1500-based board */
#define MACH_PB1550 8 /* Au1550-based eval board */
#define MACH_DB1550 9 /* Au1550-based eval board */
#define MACH_PB1200 10 /* Au1200-based eval board */
#define MACH_DB1200 11 /* Au1200-based eval board */
/*
* Valid machtype for group NEC_VR41XX

3
include/asm-mips/cpu.h
View File

@ -182,7 +182,8 @@
#define CPU_VR4133 56
#define CPU_AU1550 57
#define CPU_24K 58
#define CPU_LAST 58
#define CPU_AU1200 59
#define CPU_LAST 59
/*
* ISA Level encodings

558
include/asm-mips/mach-au1x00/au1000.h
View File

@ -162,28 +162,356 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
#endif
/* SDRAM Controller */
/*
* SDRAM Register Offsets
*/
#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
#define MEM_SDMODE0 0xB4000000
#define MEM_SDMODE1 0xB4000004
#define MEM_SDMODE2 0xB4000008
#define MEM_SDMODE0 (0x0000)
#define MEM_SDMODE1 (0x0004)
#define MEM_SDMODE2 (0x0008)
#define MEM_SDADDR0 (0x000C)
#define MEM_SDADDR1 (0x0010)
#define MEM_SDADDR2 (0x0014)
#define MEM_SDREFCFG (0x0018)
#define MEM_SDPRECMD (0x001C)
#define MEM_SDAUTOREF (0x0020)
#define MEM_SDWRMD0 (0x0024)
#define MEM_SDWRMD1 (0x0028)
#define MEM_SDWRMD2 (0x002C)
#define MEM_SDSLEEP (0x0030)
#define MEM_SDSMCKE (0x0034)
#define MEM_SDADDR0 0xB400000C
#define MEM_SDADDR1 0xB4000010
#define MEM_SDADDR2 0xB4000014
#ifndef ASSEMBLER
/*typedef volatile struct
{
uint32 sdmode0;
uint32 sdmode1;
uint32 sdmode2;
uint32 sdaddr0;
uint32 sdaddr1;
uint32 sdaddr2;
uint32 sdrefcfg;
uint32 sdautoref;
uint32 sdwrmd0;
uint32 sdwrmd1;
uint32 sdwrmd2;
uint32 sdsleep;
uint32 sdsmcke;
#define MEM_SDREFCFG 0xB4000018
#define MEM_SDPRECMD 0xB400001C
#define MEM_SDAUTOREF 0xB4000020
#define MEM_SDWRMD0 0xB4000024
#define MEM_SDWRMD1 0xB4000028
#define MEM_SDWRMD2 0xB400002C
#define MEM_SDSLEEP 0xB4000030
#define MEM_SDSMCKE 0xB4000034
} AU1X00_SDRAM;*/
#endif
/*
* MEM_SDMODE register content definitions
*/
#define MEM_SDMODE_F (1<<22)
#define MEM_SDMODE_SR (1<<21)
#define MEM_SDMODE_BS (1<<20)
#define MEM_SDMODE_RS (3<<18)
#define MEM_SDMODE_CS (7<<15)
#define MEM_SDMODE_TRAS (15<<11)
#define MEM_SDMODE_TMRD (3<<9)
#define MEM_SDMODE_TWR (3<<7)
#define MEM_SDMODE_TRP (3<<5)
#define MEM_SDMODE_TRCD (3<<3)
#define MEM_SDMODE_TCL (7<<0)
#define MEM_SDMODE_BS_2Bank (0<<20)
#define MEM_SDMODE_BS_4Bank (1<<20)
#define MEM_SDMODE_RS_11Row (0<<18)
#define MEM_SDMODE_RS_12Row (1<<18)
#define MEM_SDMODE_RS_13Row (2<<18)
#define MEM_SDMODE_RS_N(N) ((N)<<18)
#define MEM_SDMODE_CS_7Col (0<<15)
#define MEM_SDMODE_CS_8Col (1<<15)
#define MEM_SDMODE_CS_9Col (2<<15)
#define MEM_SDMODE_CS_10Col (3<<15)
#define MEM_SDMODE_CS_11Col (4<<15)
#define MEM_SDMODE_CS_N(N) ((N)<<15)
#define MEM_SDMODE_TRAS_N(N) ((N)<<11)
#define MEM_SDMODE_TMRD_N(N) ((N)<<9)
#define MEM_SDMODE_TWR_N(N) ((N)<<7)
#define MEM_SDMODE_TRP_N(N) ((N)<<5)
#define MEM_SDMODE_TRCD_N(N) ((N)<<3)
#define MEM_SDMODE_TCL_N(N) ((N)<<0)
/*
* MEM_SDADDR register contents definitions
*/
#define MEM_SDADDR_E (1<<20)
#define MEM_SDADDR_CSBA (0x03FF<<10)
#define MEM_SDADDR_CSMASK (0x03FF<<0)
#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12)
#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22)
/*
* MEM_SDREFCFG register content definitions
*/
#define MEM_SDREFCFG_TRC (15<<28)
#define MEM_SDREFCFG_TRPM (3<<26)
#define MEM_SDREFCFG_E (1<<25)
#define MEM_SDREFCFG_RE (0x1ffffff<<0)
#define MEM_SDREFCFG_TRC_N(N) ((N)<<MEM_SDREFCFG_TRC)
#define MEM_SDREFCFG_TRPM_N(N) ((N)<<MEM_SDREFCFG_TRPM)
#define MEM_SDREFCFG_REF_N(N) (N)
#endif
/***********************************************************************/
/*
* Au1550 SDRAM Register Offsets
*/
/***********************************************************************/
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
#define MEM_SDMODE0 (0x0800)
#define MEM_SDMODE1 (0x0808)
#define MEM_SDMODE2 (0x0810)
#define MEM_SDADDR0 (0x0820)
#define MEM_SDADDR1 (0x0828)
#define MEM_SDADDR2 (0x0830)
#define MEM_SDCONFIGA (0x0840)
#define MEM_SDCONFIGB (0x0848)
#define MEM_SDSTAT (0x0850)
#define MEM_SDERRADDR (0x0858)
#define MEM_SDSTRIDE0 (0x0860)
#define MEM_SDSTRIDE1 (0x0868)
#define MEM_SDSTRIDE2 (0x0870)
#define MEM_SDWRMD0 (0x0880)
#define MEM_SDWRMD1 (0x0888)
#define MEM_SDWRMD2 (0x0890)
#define MEM_SDPRECMD (0x08C0)
#define MEM_SDAUTOREF (0x08C8)
#define MEM_SDSREF (0x08D0)
#define MEM_SDSLEEP MEM_SDSREF
#ifndef ASSEMBLER
/*typedef volatile struct
{
uint32 sdmode0;
uint32 reserved0;
uint32 sdmode1;
uint32 reserved1;
uint32 sdmode2;
uint32 reserved2[3];
uint32 sdaddr0;
uint32 reserved3;
uint32 sdaddr1;
uint32 reserved4;
uint32 sdaddr2;
uint32 reserved5[3];
uint32 sdconfiga;
uint32 reserved6;
uint32 sdconfigb;
uint32 reserved7;
uint32 sdstat;
uint32 reserved8;
uint32 sderraddr;
uint32 reserved9;
uint32 sdstride0;
uint32 reserved10;
uint32 sdstride1;
uint32 reserved11;
uint32 sdstride2;
uint32 reserved12[3];
uint32 sdwrmd0;
uint32 reserved13;
uint32 sdwrmd1;
uint32 reserved14;
uint32 sdwrmd2;
uint32 reserved15[11];
uint32 sdprecmd;
uint32 reserved16;
uint32 sdautoref;
uint32 reserved17;
uint32 sdsref;
} AU1550_SDRAM;*/
#endif
#endif
/*
* Physical base addresses for integrated peripherals
*/
#ifdef CONFIG_SOC_AU1000
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define DMA0_PHYS_ADDR 0x14002000
#define DMA1_PHYS_ADDR 0x14002100
#define DMA2_PHYS_ADDR 0x14002200
#define DMA3_PHYS_ADDR 0x14002300
#define DMA4_PHYS_ADDR 0x14002400
#define DMA5_PHYS_ADDR 0x14002500
#define DMA6_PHYS_ADDR 0x14002600
#define DMA7_PHYS_ADDR 0x14002700
#define IC0_PHYS_ADDR 0x10400000
#define IC1_PHYS_ADDR 0x11800000
#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define IRDA_PHYS_ADDR 0x10300000
#define MAC0_PHYS_ADDR 0x10500000
#define MAC1_PHYS_ADDR 0x10510000
#define MACEN_PHYS_ADDR 0x10520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define I2S_PHYS_ADDR 0x11000000
#define UART0_PHYS_ADDR 0x11100000
#define UART1_PHYS_ADDR 0x11200000
#define UART2_PHYS_ADDR 0x11300000
#define UART3_PHYS_ADDR 0x11400000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#define SYS_PHYS_ADDR 0x11900000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
#endif
/********************************************************************/
#ifdef CONFIG_SOC_AU1500
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define DMA0_PHYS_ADDR 0x14002000
#define DMA1_PHYS_ADDR 0x14002100
#define DMA2_PHYS_ADDR 0x14002200
#define DMA3_PHYS_ADDR 0x14002300
#define DMA4_PHYS_ADDR 0x14002400
#define DMA5_PHYS_ADDR 0x14002500
#define DMA6_PHYS_ADDR 0x14002600
#define DMA7_PHYS_ADDR 0x14002700
#define IC0_PHYS_ADDR 0x10400000
#define IC1_PHYS_ADDR 0x11800000
#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define PCI_PHYS_ADDR 0x14005000
#define MAC0_PHYS_ADDR 0x11500000
#define MAC1_PHYS_ADDR 0x11510000
#define MACEN_PHYS_ADDR 0x11520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define I2S_PHYS_ADDR 0x11000000
#define UART0_PHYS_ADDR 0x11100000
#define UART3_PHYS_ADDR 0x11400000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define PCI_MEM_PHYS_ADDR 0x400000000
#define PCI_IO_PHYS_ADDR 0x500000000
#define PCI_CONFIG0_PHYS_ADDR 0x600000000
#define PCI_CONFIG1_PHYS_ADDR 0x680000000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
#endif
/********************************************************************/
#ifdef CONFIG_SOC_AU1100
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define DMA0_PHYS_ADDR 0x14002000
#define DMA1_PHYS_ADDR 0x14002100
#define DMA2_PHYS_ADDR 0x14002200
#define DMA3_PHYS_ADDR 0x14002300
#define DMA4_PHYS_ADDR 0x14002400
#define DMA5_PHYS_ADDR 0x14002500
#define DMA6_PHYS_ADDR 0x14002600
#define DMA7_PHYS_ADDR 0x14002700
#define IC0_PHYS_ADDR 0x10400000
#define SD0_PHYS_ADDR 0x10600000
#define SD1_PHYS_ADDR 0x10680000
#define IC1_PHYS_ADDR 0x11800000
#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define IRDA_PHYS_ADDR 0x10300000
#define MAC0_PHYS_ADDR 0x10500000
#define MACEN_PHYS_ADDR 0x10520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define I2S_PHYS_ADDR 0x11000000
#define UART0_PHYS_ADDR 0x11100000
#define UART1_PHYS_ADDR 0x11200000
#define UART3_PHYS_ADDR 0x11400000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define LCD_PHYS_ADDR 0x15000000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
#endif
/***********************************************************************/
#ifdef CONFIG_SOC_AU1550
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define IC0_PHYS_ADDR 0x10400000
#define IC1_PHYS_ADDR 0x11800000
#define USBH_PHYS_ADDR 0x14020000
#define USBD_PHYS_ADDR 0x10200000
#define PCI_PHYS_ADDR 0x14005000
#define MAC0_PHYS_ADDR 0x10500000
#define MAC1_PHYS_ADDR 0x10510000
#define MACEN_PHYS_ADDR 0x10520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define UART0_PHYS_ADDR 0x11100000
#define UART1_PHYS_ADDR 0x11200000
#define UART3_PHYS_ADDR 0x11400000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define DDMA_PHYS_ADDR 0x14002000
#define PE_PHYS_ADDR 0x14008000
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
#define PSC2_PHYS_ADDR 0x10A00000
#define PSC3_PHYS_ADDR 0x10B00000
#define PCI_MEM_PHYS_ADDR 0x400000000
#define PCI_IO_PHYS_ADDR 0x500000000
#define PCI_CONFIG0_PHYS_ADDR 0x600000000
#define PCI_CONFIG1_PHYS_ADDR 0x680000000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
#endif
/***********************************************************************/
#ifdef CONFIG_SOC_AU1200
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define AES_PHYS_ADDR 0x10300000
#define CIM_PHYS_ADDR 0x14004000
#define IC0_PHYS_ADDR 0x10400000
#define IC1_PHYS_ADDR 0x11800000
#define USBM_PHYS_ADDR 0x14020000
#define USBH_PHYS_ADDR 0x14020100
#define UART0_PHYS_ADDR 0x11100000
#define UART1_PHYS_ADDR 0x11200000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define DDMA_PHYS_ADDR 0x14002000
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
#define SD0_PHYS_ADDR 0x10600000
#define SD1_PHYS_ADDR 0x10680000
#define LCD_PHYS_ADDR 0x15000000
#define SWCNT_PHYS_ADDR 0x1110010C
#define MAEFE_PHYS_ADDR 0x14012000
#define MAEBE_PHYS_ADDR 0x14010000
#endif
/* Static Bus Controller */
#define MEM_STCFG0 0xB4001000
#define MEM_STTIME0 0xB4001004
@ -369,7 +697,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define AU1000_MAC0_ENABLE 0xB0520000
#define AU1000_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif // CONFIG_SOC_AU1000
#endif /* CONFIG_SOC_AU1000 */
/* Au1500 */
#ifdef CONFIG_SOC_AU1500
@ -440,7 +768,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define AU1500_MAC0_ENABLE 0xB1520000
#define AU1500_MAC1_ENABLE 0xB1520004
#define NUM_ETH_INTERFACES 2
#endif // CONFIG_SOC_AU1500
#endif /* CONFIG_SOC_AU1500 */
/* Au1100 */
#ifdef CONFIG_SOC_AU1100
@ -485,6 +813,22 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define AU1000_GPIO_13 45
#define AU1000_GPIO_14 46
#define AU1000_GPIO_15 47
#define AU1000_GPIO_16 48
#define AU1000_GPIO_17 49
#define AU1000_GPIO_18 50
#define AU1000_GPIO_19 51
#define AU1000_GPIO_20 52
#define AU1000_GPIO_21 53
#define AU1000_GPIO_22 54
#define AU1000_GPIO_23 55
#define AU1000_GPIO_24 56
#define AU1000_GPIO_25 57
#define AU1000_GPIO_26 58
#define AU1000_GPIO_27 59
#define AU1000_GPIO_28 60
#define AU1000_GPIO_29 61
#define AU1000_GPIO_30 62
#define AU1000_GPIO_31 63
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
@ -496,7 +840,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define AU1100_ETH0_BASE 0xB0500000
#define AU1100_MAC0_ENABLE 0xB0520000
#define NUM_ETH_INTERFACES 1
#endif // CONFIG_SOC_AU1100
#endif /* CONFIG_SOC_AU1100 */
#ifdef CONFIG_SOC_AU1550
#define AU1550_UART0_INT 0
@ -513,14 +857,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define AU1550_PSC1_INT 11
#define AU1550_PSC2_INT 12
#define AU1550_PSC3_INT 13
#define AU1550_TOY_INT 14
#define AU1550_TOY_MATCH0_INT 15
#define AU1550_TOY_MATCH1_INT 16
#define AU1550_TOY_MATCH2_INT 17
#define AU1550_RTC_INT 18
#define AU1550_RTC_MATCH0_INT 19
#define AU1550_RTC_MATCH1_INT 20
#define AU1550_RTC_MATCH2_INT 21
#define AU1000_TOY_INT 14
#define AU1000_TOY_MATCH0_INT 15
#define AU1000_TOY_MATCH1_INT 16
#define AU1000_TOY_MATCH2_INT 17
#define AU1000_RTC_INT 18
#define AU1000_RTC_MATCH0_INT 19
#define AU1000_RTC_MATCH1_INT 20
#define AU1000_RTC_MATCH2_INT 21
#define AU1550_NAND_INT 23
#define AU1550_USB_DEV_REQ_INT 24
#define AU1550_USB_DEV_SUS_INT 25
@ -575,7 +919,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define AU1550_MAC0_ENABLE 0xB0520000
#define AU1550_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif // CONFIG_SOC_AU1550
#endif /* CONFIG_SOC_AU1550 */
#ifdef CONFIG_SOC_AU1200
#define AU1200_UART0_INT 0
@ -592,14 +936,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define AU1200_PSC1_INT 11
#define AU1200_AES_INT 12
#define AU1200_CAMERA_INT 13
#define AU1200_TOY_INT 14
#define AU1200_TOY_MATCH0_INT 15
#define AU1200_TOY_MATCH1_INT 16
#define AU1200_TOY_MATCH2_INT 17
#define AU1200_RTC_INT 18
#define AU1200_RTC_MATCH0_INT 19
#define AU1200_RTC_MATCH1_INT 20
#define AU1200_RTC_MATCH2_INT 21
#define AU1000_TOY_INT 14
#define AU1000_TOY_MATCH0_INT 15
#define AU1000_TOY_MATCH1_INT 16
#define AU1000_TOY_MATCH2_INT 17
#define AU1000_RTC_INT 18
#define AU1000_RTC_MATCH0_INT 19
#define AU1000_RTC_MATCH1_INT 20
#define AU1000_RTC_MATCH2_INT 21
#define AU1200_NAND_INT 23
#define AU1200_GPIO_204 24
#define AU1200_GPIO_205 25
@ -607,6 +951,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define AU1200_GPIO_207 27
#define AU1200_GPIO_208_215 28 // Logical OR of 208:215
#define AU1200_USB_INT 29
#define AU1000_USB_HOST_INT AU1200_USB_INT
#define AU1200_LCD_INT 30
#define AU1200_MAE_BOTH_INT 31
#define AU1000_GPIO_0 32
@ -645,21 +990,36 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
#define USB_OHCI_BASE 0x14020000 // phys addr for ioremap
#define USB_HOST_CONFIG 0xB4027ffc
#define USB_UOC_BASE 0x14020020
#define USB_UOC_LEN 0x20
#define USB_OHCI_BASE 0x14020100
#define USB_OHCI_LEN 0x100
#define USB_EHCI_BASE 0x14020200
#define USB_EHCI_LEN 0x100
#define USB_UDC_BASE 0x14022000
#define USB_UDC_LEN 0x2000
#define USB_MSR_BASE 0xB4020000
#define USB_MSR_MCFG 4
#define USBMSRMCFG_OMEMEN 0
#define USBMSRMCFG_OBMEN 1
#define USBMSRMCFG_EMEMEN 2
#define USBMSRMCFG_EBMEN 3
#define USBMSRMCFG_DMEMEN 4
#define USBMSRMCFG_DBMEN 5
#define USBMSRMCFG_GMEMEN 6
#define USBMSRMCFG_OHCCLKEN 16
#define USBMSRMCFG_EHCCLKEN 17
#define USBMSRMCFG_UDCCLKEN 18
#define USBMSRMCFG_PHYPLLEN 19
#define USBMSRMCFG_RDCOMB 30
#define USBMSRMCFG_PFEN 31
// these are here for prototyping on au1550 (do not exist on au1200)
#define AU1200_ETH0_BASE 0xB0500000
#define AU1200_ETH1_BASE 0xB0510000
#define AU1200_MAC0_ENABLE 0xB0520000
#define AU1200_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif // CONFIG_SOC_AU1200
#endif /* CONFIG_SOC_AU1200 */
#define AU1000_LAST_INTC0_INT 31
#define AU1000_LAST_INTC1_INT 63
#define AU1000_MAX_INTR 63
/* Programmable Counters 0 and 1 */
#define SYS_BASE 0xB1900000
#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
@ -730,6 +1090,8 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define I2S_CONTROL_D (1<<1)
#define I2S_CONTROL_CE (1<<0)
#ifndef CONFIG_SOC_AU1200
/* USB Host Controller */
#define USB_OHCI_LEN 0x00100000
@ -775,6 +1137,8 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define USBDEV_ENABLE (1<<1)
#define USBDEV_CE (1<<0)
#endif /* !CONFIG_SOC_AU1200 */
/* Ethernet Controllers */
/* 4 byte offsets from AU1000_ETH_BASE */
@ -1173,6 +1537,37 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define SYS_PF_PSC1_S1 (1 << 1)
#define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
/* Au1200 Only */
#ifdef CONFIG_SOC_AU1200
#define SYS_PINFUNC_DMA (1<<31)
#define SYS_PINFUNC_S0A (1<<30)
#define SYS_PINFUNC_S1A (1<<29)
#define SYS_PINFUNC_LP0 (1<<28)
#define SYS_PINFUNC_LP1 (1<<27)
#define SYS_PINFUNC_LD16 (1<<26)
#define SYS_PINFUNC_LD8 (1<<25)
#define SYS_PINFUNC_LD1 (1<<24)
#define SYS_PINFUNC_LD0 (1<<23)
#define SYS_PINFUNC_P1A (3<<21)
#define SYS_PINFUNC_P1B (1<<20)
#define SYS_PINFUNC_FS3 (1<<19)
#define SYS_PINFUNC_P0A (3<<17)
#define SYS_PINFUNC_CS (1<<16)
#define SYS_PINFUNC_CIM (1<<15)
#define SYS_PINFUNC_P1C (1<<14)
#define SYS_PINFUNC_U1T (1<<12)
#define SYS_PINFUNC_U1R (1<<11)
#define SYS_PINFUNC_EX1 (1<<10)
#define SYS_PINFUNC_EX0 (1<<9)
#define SYS_PINFUNC_U0R (1<<8)
#define SYS_PINFUNC_MC (1<<7)
#define SYS_PINFUNC_S0B (1<<6)
#define SYS_PINFUNC_S0C (1<<5)
#define SYS_PINFUNC_P0B (1<<4)
#define SYS_PINFUNC_U0T (1<<3)
#define SYS_PINFUNC_S1B (1<<2)
#endif
#define SYS_TRIOUTRD 0xB1900100
#define SYS_TRIOUTCLR 0xB1900100
#define SYS_OUTPUTRD 0xB1900108
@ -1300,7 +1695,6 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define SD1_XMIT_FIFO 0xB0680000
#define SD1_RECV_FIFO 0xB0680004
#if defined (CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
/* Au1500 PCI Controller */
#define Au1500_CFG_BASE 0xB4005000 // virtual, kseg0 addr
@ -1363,36 +1757,77 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
_ctl_; })
#else /* Au1000 and Au1100 */
#else /* Au1000 and Au1100 and Au1200 */
/* don't allow any legacy ports probing */
#define IOPORT_RESOURCE_START 0x10000000;
#define IOPORT_RESOURCE_START 0x10000000
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xffffffff
#ifdef CONFIG_MIPS_PB1000
#define PCI_IO_START 0x10000000
#define PCI_IO_END 0x1000ffff
#define PCI_MEM_START 0x18000000
#define PCI_MEM_END 0x18ffffff
#define PCI_FIRST_DEVFN 0
#define PCI_LAST_DEVFN 1
#else
/* no PCI bus controller */
#define PCI_IO_START 0
#define PCI_IO_END 0
#define PCI_MEM_START 0
#define PCI_MEM_END 0
#define PCI_FIRST_DEVFN 0
#define PCI_LAST_DEVFN 0
#endif
#endif
#ifndef _LANGUAGE_ASSEMBLY
typedef volatile struct
{
/* 0x0000 */ u32 toytrim;
/* 0x0004 */ u32 toywrite;
/* 0x0008 */ u32 toymatch0;
/* 0x000C */ u32 toymatch1;
/* 0x0010 */ u32 toymatch2;
/* 0x0014 */ u32 cntrctrl;
/* 0x0018 */ u32 scratch0;
/* 0x001C */ u32 scratch1;
/* 0x0020 */ u32 freqctrl0;
/* 0x0024 */ u32 freqctrl1;
/* 0x0028 */ u32 clksrc;
/* 0x002C */ u32 pinfunc;
/* 0x0030 */ u32 reserved0;
/* 0x0034 */ u32 wakemsk;
/* 0x0038 */ u32 endian;
/* 0x003C */ u32 powerctrl;
/* 0x0040 */ u32 toyread;
/* 0x0044 */ u32 rtctrim;
/* 0x0048 */ u32 rtcwrite;
/* 0x004C */ u32 rtcmatch0;
/* 0x0050 */ u32 rtcmatch1;
/* 0x0054 */ u32 rtcmatch2;
/* 0x0058 */ u32 rtcread;
/* 0x005C */ u32 wakesrc;
/* 0x0060 */ u32 cpupll;
/* 0x0064 */ u32 auxpll;
/* 0x0068 */ u32 reserved1;
/* 0x006C */ u32 reserved2;
/* 0x0070 */ u32 reserved3;
/* 0x0074 */ u32 reserved4;
/* 0x0078 */ u32 slppwr;
/* 0x007C */ u32 sleep;
/* 0x0080 */ u32 reserved5[32];
/* 0x0100 */ u32 trioutrd;
#define trioutclr trioutrd
/* 0x0104 */ u32 reserved6;
/* 0x0108 */ u32 outputrd;
#define outputset outputrd
/* 0x010C */ u32 outputclr;
/* 0x0110 */ u32 pinstaterd;
#define pininputen pinstaterd
} AU1X00_SYS;
static AU1X00_SYS* const sys = (AU1X00_SYS *)SYS_BASE;
#endif
/* Processor information base on prid.
* Copied from PowerPC.
*/
#ifndef _LANGUAGE_ASSEMBLY
struct cpu_spec {
/* CPU is matched via (PRID & prid_mask) == prid_value */
unsigned int prid_mask;
@ -1406,3 +1841,6 @@ struct cpu_spec {
extern struct cpu_spec cpu_specs[];
extern struct cpu_spec *cur_cpu_spec[];
#endif
#endif

124
include/asm-mips/mach-au1x00/au1xxx_dbdma.h
View File

@ -45,7 +45,7 @@
#define DDMA_GLOBAL_BASE 0xb4003000
#define DDMA_CHANNEL_BASE 0xb4002000
typedef struct dbdma_global {
typedef volatile struct dbdma_global {
u32 ddma_config;
u32 ddma_intstat;
u32 ddma_throttle;
@ -62,7 +62,7 @@ typedef struct dbdma_global {
/* The structure of a DMA Channel.
*/
typedef struct au1xxx_dma_channel {
typedef volatile struct au1xxx_dma_channel {
u32 ddma_cfg; /* See below */
u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */
u32 ddma_statptr; /* word aligned pointer to status word */
@ -98,7 +98,7 @@ typedef struct au1xxx_dma_channel {
/* "Standard" DDMA Descriptor.
* Must be 32-byte aligned.
*/
typedef struct au1xxx_ddma_desc {
typedef volatile struct au1xxx_ddma_desc {
u32 dscr_cmd0; /* See below */
u32 dscr_cmd1; /* See below */
u32 dscr_source0; /* source phys address */
@ -107,6 +107,12 @@ typedef struct au1xxx_ddma_desc {
u32 dscr_dest1; /* See below */
u32 dscr_stat; /* completion status */
u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
/* First 32bytes are HW specific!!!
Lets have some SW data following.. make sure its 32bytes
*/
u32 sw_status;
u32 sw_context;
u32 sw_reserved[6];
} au1x_ddma_desc_t;
#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */
@ -125,8 +131,11 @@ typedef struct au1xxx_ddma_desc {
#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */
#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */
#define SW_STATUS_INUSE (1<<0)
/* Command 0 device IDs.
*/
#ifdef CONFIG_SOC_AU1550
#define DSCR_CMD0_UART0_TX 0
#define DSCR_CMD0_UART0_RX 1
#define DSCR_CMD0_UART3_TX 2
@ -155,9 +164,45 @@ typedef struct au1xxx_ddma_desc {
#define DSCR_CMD0_MAC0_TX 25
#define DSCR_CMD0_MAC1_RX 26
#define DSCR_CMD0_MAC1_TX 27
#endif /* CONFIG_SOC_AU1550 */
#ifdef CONFIG_SOC_AU1200
#define DSCR_CMD0_UART0_TX 0
#define DSCR_CMD0_UART0_RX 1
#define DSCR_CMD0_UART1_TX 2
#define DSCR_CMD0_UART1_RX 3
#define DSCR_CMD0_DMA_REQ0 4
#define DSCR_CMD0_DMA_REQ1 5
#define DSCR_CMD0_MAE_BE 6
#define DSCR_CMD0_MAE_FE 7
#define DSCR_CMD0_SDMS_TX0 8
#define DSCR_CMD0_SDMS_RX0 9
#define DSCR_CMD0_SDMS_TX1 10
#define DSCR_CMD0_SDMS_RX1 11
#define DSCR_CMD0_AES_TX 13
#define DSCR_CMD0_AES_RX 12
#define DSCR_CMD0_PSC0_TX 14
#define DSCR_CMD0_PSC0_RX 15
#define DSCR_CMD0_PSC1_TX 16
#define DSCR_CMD0_PSC1_RX 17
#define DSCR_CMD0_CIM_RXA 18
#define DSCR_CMD0_CIM_RXB 19
#define DSCR_CMD0_CIM_RXC 20
#define DSCR_CMD0_MAE_BOTH 21
#define DSCR_CMD0_LCD 22
#define DSCR_CMD0_NAND_FLASH 23
#define DSCR_CMD0_PSC0_SYNC 24
#define DSCR_CMD0_PSC1_SYNC 25
#define DSCR_CMD0_CIM_SYNC 26
#endif /* CONFIG_SOC_AU1200 */
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
#define DSCR_NDEV_IDS 32
/* THis macro is used to find/create custom device types */
#define DSCR_DEV2CUSTOM_ID(x,d) (((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF))
#define DSCR_CUSTOM2DEV_ID(x) ((x)&0xFF)
#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25)
#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20)
@ -246,6 +291,43 @@ typedef struct au1xxx_ddma_desc {
*/
#define NUM_DBDMA_CHANS 16
/*
* Ddma API definitions
* FIXME: may not fit to this header file
*/
typedef struct dbdma_device_table {
u32 dev_id;
u32 dev_flags;
u32 dev_tsize;
u32 dev_devwidth;
u32 dev_physaddr; /* If FIFO */
u32 dev_intlevel;
u32 dev_intpolarity;
} dbdev_tab_t;
typedef struct dbdma_chan_config {
spinlock_t lock;
u32 chan_flags;
u32 chan_index;
dbdev_tab_t *chan_src;
dbdev_tab_t *chan_dest;
au1x_dma_chan_t *chan_ptr;
au1x_ddma_desc_t *chan_desc_base;
au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
void *chan_callparam;
void (*chan_callback)(int, void *, struct pt_regs *);
} chan_tab_t;
#define DEV_FLAGS_INUSE (1 << 0)
#define DEV_FLAGS_ANYUSE (1 << 1)
#define DEV_FLAGS_OUT (1 << 2)
#define DEV_FLAGS_IN (1 << 3)
#define DEV_FLAGS_BURSTABLE (1 << 4)
#define DEV_FLAGS_SYNC (1 << 5)
/* end Ddma API definitions */
/* External functions for drivers to use.
*/
/* Use this to allocate a dbdma channel. The device ids are one of the
@ -258,18 +340,6 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS
/* ACK! These should be in a board specific description file.
*/
#ifdef CONFIG_MIPS_PB1550
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
#endif
#ifdef CONFIG_MIPS_DB1550
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
#endif
/* Set the device width of a in/out fifo.
*/
u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
@ -280,8 +350,8 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
/* Put buffers on source/destination descriptors.
*/
u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes);
u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes);
u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
/* Get a buffer from the destination descriptor.
*/
@ -295,5 +365,25 @@ u32 au1xxx_get_dma_residue(u32 chanid);
void au1xxx_dbdma_chan_free(u32 chanid);
void au1xxx_dbdma_dump(u32 chanid);
u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr );
u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
/*
Some compatibilty macros --
Needed to make changes to API without breaking existing drivers
*/
#define au1xxx_dbdma_put_source(chanid,buf,nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
#define au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
#define au1xxx_dbdma_put_dest(chanid,buf,nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
#define au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
/*
* Flags for the put_source/put_dest functions.
*/
#define DDMA_FLAGS_IE (1<<0)
#define DDMA_FLAGS_NOIE (1<<1)
#endif /* _LANGUAGE_ASSEMBLY */
#endif /* _AU1000_DBDMA_H_ */

214
include/asm-mips/mach-db1x00/db1200.h Normal file
View File

@ -0,0 +1,214 @@
/*
* AMD Alchemy DB1200 Referrence Board
* Board Registers defines.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
*
*/
#ifndef __ASM_DB1200_H
#define __ASM_DB1200_H
#include <linux/types.h>
// This is defined in au1000.h with bogus value
#undef AU1X00_EXTERNAL_INT
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
/* SPI and SMB are muxed on the Pb1200 board.
Refer to board documentation.
*/
#define SPI_PSC_BASE PSC0_BASE_ADDR
#define SMBUS_PSC_BASE PSC0_BASE_ADDR
/* AC97 and I2S are muxed on the Pb1200 board.
Refer to board documentation.
*/
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
#define BCSR_KSEG1_ADDR 0xB9800000
typedef volatile struct
{
/*00*/ u16 whoami;
u16 reserved0;
/*04*/ u16 status;
u16 reserved1;
/*08*/ u16 switches;
u16 reserved2;
/*0C*/ u16 resets;
u16 reserved3;
/*10*/ u16 pcmcia;
u16 reserved4;
/*14*/ u16 board;
u16 reserved5;
/*18*/ u16 disk_leds;
u16 reserved6;
/*1C*/ u16 system;
u16 reserved7;
/*20*/ u16 intclr;
u16 reserved8;
/*24*/ u16 intset;
u16 reserved9;
/*28*/ u16 intclr_mask;
u16 reserved10;
/*2C*/ u16 intset_mask;
u16 reserved11;
/*30*/ u16 sig_status;
u16 reserved12;
/*34*/ u16 int_status;
u16 reserved13;
/*38*/ u16 reserved14;
u16 reserved15;
/*3C*/ u16 reserved16;
u16 reserved17;
} BCSR;
static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
/*
* Register bit definitions for the BCSRs
*/
#define BCSR_WHOAMI_DCID 0x000F
#define BCSR_WHOAMI_CPLD 0x00F0
#define BCSR_WHOAMI_BOARD 0x0F00
#define BCSR_STATUS_PCMCIA0VS 0x0003
#define BCSR_STATUS_PCMCIA1VS 0x000C
#define BCSR_STATUS_SWAPBOOT 0x0040
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_IDECBLID 0x0200
#define BCSR_STATUS_SD0WP 0x0400
#define BCSR_STATUS_U0RXD 0x1000
#define BCSR_STATUS_U1RXD 0x2000
#define BCSR_SWITCHES_OCTAL 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
#define BCSR_SWITCHES_DIP_2 0x0040
#define BCSR_SWITCHES_DIP_3 0x0020
#define BCSR_SWITCHES_DIP_4 0x0010
#define BCSR_SWITCHES_DIP_5 0x0008
#define BCSR_SWITCHES_DIP_6 0x0004
#define BCSR_SWITCHES_DIP_7 0x0002
#define BCSR_SWITCHES_DIP_8 0x0001
#define BCSR_SWITCHES_ROTARY 0x0F00
#define BCSR_RESETS_ETH 0x0001
#define BCSR_RESETS_CAMERA 0x0002
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
#define BCSR_RESETS_TV 0x0010
/* not resets but in the same register */
#define BCSR_RESETS_PWMR1mUX 0x0800
#define BCSR_RESETS_PCS0MUX 0x1000
#define BCSR_RESETS_PCS1MUX 0x2000
#define BCSR_RESETS_SPISEL 0x4000
#define BCSR_PCMCIA_PC0VPP 0x0003
#define BCSR_PCMCIA_PC0VCC 0x000C
#define BCSR_PCMCIA_PC0DRVEN 0x0010
#define BCSR_PCMCIA_PC0RST 0x0080
#define BCSR_PCMCIA_PC1VPP 0x0300
#define BCSR_PCMCIA_PC1VCC 0x0C00
#define BCSR_PCMCIA_PC1DRVEN 0x1000
#define BCSR_PCMCIA_PC1RST 0x8000
#define BCSR_BOARD_LCDVEE 0x0001
#define BCSR_BOARD_LCDVDD 0x0002
#define BCSR_BOARD_LCDBL 0x0004
#define BCSR_BOARD_CAMSNAP 0x0010
#define BCSR_BOARD_CAMPWR 0x0020
#define BCSR_BOARD_SD0PWR 0x0040
#define BCSR_LEDS_DECIMALS 0x0003
#define BCSR_LEDS_LED0 0x0100
#define BCSR_LEDS_LED1 0x0200
#define BCSR_LEDS_LED2 0x0400
#define BCSR_LEDS_LED3 0x0800
#define BCSR_SYSTEM_POWEROFF 0x4000
#define BCSR_SYSTEM_RESET 0x8000
/* Bit positions for the different interrupt sources */
#define BCSR_INT_IDE 0x0001
#define BCSR_INT_ETH 0x0002
#define BCSR_INT_PC0 0x0004
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
#define BCSR_INT_PC1INSERT 0x0400
#define BCSR_INT_PC1EJECT 0x0800
#define BCSR_INT_SD0INSERT 0x1000
#define BCSR_INT_SD0EJECT 0x2000
#define AU1XXX_SMC91111_PHYS_ADDR (0x19000300)
#define AU1XXX_SMC91111_IRQ DB1200_ETH_INT
#define AU1XXX_ATA_PHYS_ADDR (0x18800000)
#define AU1XXX_ATA_PHYS_LEN (0x100)
#define AU1XXX_ATA_REG_OFFSET (5)
#define AU1XXX_ATA_INT DB1200_IDE_INT
#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
#define AU1XXX_ATA_RQSIZE 128
#define NAND_PHYS_ADDR 0x20000000
/*
* External Interrupts for Pb1200 as of 8/6/2004.
* Bit positions in the CPLD registers can be calculated by taking
* the interrupt define and subtracting the DB1200_INT_BEGIN value.
* *example: IDE bis pos is = 64 - 64
ETH bit pos is = 65 - 64
*/
#define DB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1)
#define DB1200_IDE_INT (DB1200_INT_BEGIN + 0)
#define DB1200_ETH_INT (DB1200_INT_BEGIN + 1)
#define DB1200_PC0_INT (DB1200_INT_BEGIN + 2)
#define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3)
#define DB1200_PC1_INT (DB1200_INT_BEGIN + 4)
#define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5)
#define DB1200_DC_INT (DB1200_INT_BEGIN + 6)
#define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7)
#define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8)
#define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9)
#define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10)
#define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11)
#define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12)
#define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13)
#define DB1200_INT_END (DB1200_INT_BEGIN + 15)
/* For drivers/pcmcia/au1000_db1x00.c */
#define BOARD_PC0_INT DB1200_PC0_INT
#define BOARD_PC1_INT DB1200_PC1_INT
#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
#endif /* __ASM_DB1200_H */

244
include/asm-mips/mach-pb1x00/pb1200.h Normal file
View File

@ -0,0 +1,244 @@
/*
* AMD Alchemy PB1200 Referrence Board
* Board Registers defines.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
*
*/
#ifndef __ASM_PB1200_H
#define __ASM_PB1200_H
#include <linux/types.h>
// This is defined in au1000.h with bogus value
#undef AU1X00_EXTERNAL_INT
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
/* SPI and SMB are muxed on the Pb1200 board.
Refer to board documentation.
*/
#define SPI_PSC_BASE PSC0_BASE_ADDR
#define SMBUS_PSC_BASE PSC0_BASE_ADDR
/* AC97 and I2S are muxed on the Pb1200 board.
Refer to board documentation.
*/
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
#define BCSR_KSEG1_ADDR 0xAD800000
typedef volatile struct
{
/*00*/ u16 whoami;
u16 reserved0;
/*04*/ u16 status;
u16 reserved1;
/*08*/ u16 switches;
u16 reserved2;
/*0C*/ u16 resets;
u16 reserved3;
/*10*/ u16 pcmcia;
u16 reserved4;
/*14*/ u16 board;
u16 reserved5;
/*18*/ u16 disk_leds;
u16 reserved6;
/*1C*/ u16 system;
u16 reserved7;
/*20*/ u16 intclr;
u16 reserved8;
/*24*/ u16 intset;
u16 reserved9;
/*28*/ u16 intclr_mask;
u16 reserved10;
/*2C*/ u16 intset_mask;
u16 reserved11;
/*30*/ u16 sig_status;
u16 reserved12;
/*34*/ u16 int_status;
u16 reserved13;
/*38*/ u16 reserved14;
u16 reserved15;
/*3C*/ u16 reserved16;
u16 reserved17;
} BCSR;
static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
/*
* Register bit definitions for the BCSRs
*/
#define BCSR_WHOAMI_DCID 0x000F
#define BCSR_WHOAMI_CPLD 0x00F0
#define BCSR_WHOAMI_BOARD 0x0F00
#define BCSR_STATUS_PCMCIA0VS 0x0003
#define BCSR_STATUS_PCMCIA1VS 0x000C
#define BCSR_STATUS_SWAPBOOT 0x0040
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_IDECBLID 0x0200
#define BCSR_STATUS_SD0WP 0x0400
#define BCSR_STATUS_SD1WP 0x0800
#define BCSR_STATUS_U0RXD 0x1000
#define BCSR_STATUS_U1RXD 0x2000
#define BCSR_SWITCHES_OCTAL 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
#define BCSR_SWITCHES_DIP_2 0x0040
#define BCSR_SWITCHES_DIP_3 0x0020
#define BCSR_SWITCHES_DIP_4 0x0010
#define BCSR_SWITCHES_DIP_5 0x0008
#define BCSR_SWITCHES_DIP_6 0x0004
#define BCSR_SWITCHES_DIP_7 0x0002
#define BCSR_SWITCHES_DIP_8 0x0001
#define BCSR_SWITCHES_ROTARY 0x0F00
#define BCSR_RESETS_ETH 0x0001
#define BCSR_RESETS_CAMERA 0x0002
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
/* not resets but in the same register */
#define BCSR_RESETS_WSCFSM 0x0800
#define BCSR_RESETS_PCS0MUX 0x1000
#define BCSR_RESETS_PCS1MUX 0x2000
#define BCSR_RESETS_SPISEL 0x4000
#define BCSR_RESETS_SD1MUX 0x8000
#define BCSR_PCMCIA_PC0VPP 0x0003
#define BCSR_PCMCIA_PC0VCC 0x000C
#define BCSR_PCMCIA_PC0DRVEN 0x0010
#define BCSR_PCMCIA_PC0RST 0x0080
#define BCSR_PCMCIA_PC1VPP 0x0300
#define BCSR_PCMCIA_PC1VCC 0x0C00
#define BCSR_PCMCIA_PC1DRVEN 0x1000
#define BCSR_PCMCIA_PC1RST 0x8000
#define BCSR_BOARD_LCDVEE 0x0001
#define BCSR_BOARD_LCDVDD 0x0002
#define BCSR_BOARD_LCDBL 0x0004
#define BCSR_BOARD_CAMSNAP 0x0010
#define BCSR_BOARD_CAMPWR 0x0020
#define BCSR_BOARD_SD0PWR 0x0040
#define BCSR_BOARD_SD1PWR 0x0080
#define BCSR_LEDS_DECIMALS 0x00FF
#define BCSR_LEDS_LED0 0x0100
#define BCSR_LEDS_LED1 0x0200
#define BCSR_LEDS_LED2 0x0400
#define BCSR_LEDS_LED3 0x0800
#define BCSR_SYSTEM_VDDI 0x001F
#define BCSR_SYSTEM_POWEROFF 0x4000
#define BCSR_SYSTEM_RESET 0x8000
/* Bit positions for the different interrupt sources */
#define BCSR_INT_IDE 0x0001
#define BCSR_INT_ETH 0x0002
#define BCSR_INT_PC0 0x0004
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
#define BCSR_INT_PC1INSERT 0x0400
#define BCSR_INT_PC1EJECT 0x0800
#define BCSR_INT_SD0INSERT 0x1000
#define BCSR_INT_SD0EJECT 0x2000
#define BCSR_INT_SD1INSERT 0x4000
#define BCSR_INT_SD1EJECT 0x8000
#define AU1XXX_SMC91111_PHYS_ADDR (0x0D000300)
#define AU1XXX_SMC91111_IRQ PB1200_ETH_INT
#define AU1XXX_ATA_PHYS_ADDR (0x0C800000)
#define AU1XXX_ATA_PHYS_LEN (0x100)
#define AU1XXX_ATA_REG_OFFSET (5)
#define AU1XXX_ATA_INT PB1200_IDE_INT
#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
#define AU1XXX_ATA_RQSIZE 128
#define NAND_PHYS_ADDR 0x1C000000
/* Timing values as described in databook, * ns value stripped of
* lower 2 bits.
* These defines are here rather than an SOC1200 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
#define NAND_T_H (18 >> 2)
#define NAND_T_PUL (30 >> 2)
#define NAND_T_SU (30 >> 2)
#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
#define NAND_T_PUL_SHIFT 4
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
/*
* External Interrupts for Pb1200 as of 8/6/2004.
* Bit positions in the CPLD registers can be calculated by taking
* the interrupt define and subtracting the PB1200_INT_BEGIN value.
* *example: IDE bis pos is = 64 - 64
ETH bit pos is = 65 - 64
*/
#define PB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1)
#define PB1200_IDE_INT (PB1200_INT_BEGIN + 0)
#define PB1200_ETH_INT (PB1200_INT_BEGIN + 1)
#define PB1200_PC0_INT (PB1200_INT_BEGIN + 2)
#define PB1200_PC0_STSCHG_INT (PB1200_INT_BEGIN + 3)
#define PB1200_PC1_INT (PB1200_INT_BEGIN + 4)
#define PB1200_PC1_STSCHG_INT (PB1200_INT_BEGIN + 5)
#define PB1200_DC_INT (PB1200_INT_BEGIN + 6)
#define PB1200_FLASHBUSY_INT (PB1200_INT_BEGIN + 7)
#define PB1200_PC0_INSERT_INT (PB1200_INT_BEGIN + 8)
#define PB1200_PC0_EJECT_INT (PB1200_INT_BEGIN + 9)
#define PB1200_PC1_INSERT_INT (PB1200_INT_BEGIN + 10)
#define PB1200_PC1_EJECT_INT (PB1200_INT_BEGIN + 11)
#define PB1200_SD0_INSERT_INT (PB1200_INT_BEGIN + 12)
#define PB1200_SD0_EJECT_INT (PB1200_INT_BEGIN + 13)
#define PB1200_SD1_INSERT_INT (PB1200_INT_BEGIN + 14)
#define PB1200_SD1_EJECT_INT (PB1200_INT_BEGIN + 15)
#define PB1200_INT_END (PB1200_INT_BEGIN + 15)
/* For drivers/pcmcia/au1000_db1x00.c */
#define BOARD_PC0_INT PB1200_PC0_INT
#define BOARD_PC1_INT PB1200_PC1_INT
#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
#endif /* __ASM_PB1200_H */