mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 22:44:27 +08:00
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
The scripts/dtc/checks.c requires that the node have empty "dma-ranges" property must have the same "#address-cells" and "#size-cells" values as the parent node. Otherwise, the following warnings is reported: arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \ (dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \ its #address-cells (1) differs from / (2) arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \ (dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \ its #size-cells (1) differs from / (2) Arnd Bergmann figured out why it's necessary: Also note that the #address-cells=<1> means that any device under this bus is assumed to only support 32-bit addressing, and DMA will have to go through a slow swiotlb in the absence of an IOMMU. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201016090833.1892-3-thunder.leizhen@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Zhen Lei
Arnd Bergmann
parent
2013a4b684
commit
e3389b0a14
@ -179,22 +179,22 @@
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0 0xffffffff>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0 0 0 0 0x0 0xffffffff>;
|
||||
dma-ranges;
|
||||
compatible = "simple-bus";
|
||||
|
||||
prng: qrng@e1000 {
|
||||
compatible = "qcom,prng-ee";
|
||||
reg = <0xe3000 0x1000>;
|
||||
reg = <0x0 0xe3000 0x0 0x1000>;
|
||||
clocks = <&gcc GCC_PRNG_AHB_CLK>;
|
||||
clock-names = "core";
|
||||
};
|
||||
|
||||
cryptobam: dma@704000 {
|
||||
compatible = "qcom,bam-v1.7.0";
|
||||
reg = <0x00704000 0x20000>;
|
||||
reg = <0x0 0x00704000 0x0 0x20000>;
|
||||
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
@ -206,7 +206,7 @@
|
||||
|
||||
crypto: crypto@73a000 {
|
||||
compatible = "qcom,crypto-v5.1";
|
||||
reg = <0x0073a000 0x6000>;
|
||||
reg = <0x0 0x0073a000 0x0 0x6000>;
|
||||
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
|
||||
<&gcc GCC_CRYPTO_AXI_CLK>,
|
||||
<&gcc GCC_CRYPTO_CLK>;
|
||||
@ -217,7 +217,7 @@
|
||||
|
||||
tlmm: pinctrl@1000000 {
|
||||
compatible = "qcom,ipq6018-pinctrl";
|
||||
reg = <0x01000000 0x300000>;
|
||||
reg = <0x0 0x01000000 0x0 0x300000>;
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
@ -235,7 +235,7 @@
|
||||
|
||||
gcc: gcc@1800000 {
|
||||
compatible = "qcom,gcc-ipq6018";
|
||||
reg = <0x01800000 0x80000>;
|
||||
reg = <0x0 0x01800000 0x0 0x80000>;
|
||||
clocks = <&xo>, <&sleep_clk>;
|
||||
clock-names = "xo", "sleep_clk";
|
||||
#clock-cells = <1>;
|
||||
@ -244,17 +244,17 @@
|
||||
|
||||
tcsr_mutex_regs: syscon@1905000 {
|
||||
compatible = "syscon";
|
||||
reg = <0x01905000 0x8000>;
|
||||
reg = <0x0 0x01905000 0x0 0x8000>;
|
||||
};
|
||||
|
||||
tcsr_q6: syscon@1945000 {
|
||||
compatible = "syscon";
|
||||
reg = <0x01945000 0xe000>;
|
||||
reg = <0x0 0x01945000 0x0 0xe000>;
|
||||
};
|
||||
|
||||
blsp_dma: dma@7884000 {
|
||||
compatible = "qcom,bam-v1.7.0";
|
||||
reg = <0x07884000 0x2b000>;
|
||||
reg = <0x0 0x07884000 0x0 0x2b000>;
|
||||
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
@ -264,7 +264,7 @@
|
||||
|
||||
blsp1_uart3: serial@78b1000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078b1000 0x200>;
|
||||
reg = <0x0 0x078b1000 0x0 0x200>;
|
||||
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
@ -276,7 +276,7 @@
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x078b5000 0x600>;
|
||||
reg = <0x0 0x078b5000 0x0 0x600>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
spi-max-frequency = <50000000>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
|
||||
@ -291,7 +291,7 @@
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x078b6000 0x600>;
|
||||
reg = <0x0 0x078b6000 0x0 0x600>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
spi-max-frequency = <50000000>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
|
||||
@ -306,7 +306,7 @@
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x078b6000 0x600>;
|
||||
reg = <0x0 0x078b6000 0x0 0x600>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
|
||||
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
|
||||
@ -321,7 +321,7 @@
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x078b7000 0x600>;
|
||||
reg = <0x0 0x078b7000 0x0 0x600>;
|
||||
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
|
||||
<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
|
||||
@ -336,24 +336,24 @@
|
||||
compatible = "qcom,msm-qgic2";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <0x3>;
|
||||
reg = <0x0b000000 0x1000>, /*GICD*/
|
||||
<0x0b002000 0x1000>, /*GICC*/
|
||||
<0x0b001000 0x1000>, /*GICH*/
|
||||
<0x0b004000 0x1000>; /*GICV*/
|
||||
reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/
|
||||
<0x0 0x0b002000 0x0 0x1000>, /*GICC*/
|
||||
<0x0 0x0b001000 0x0 0x1000>, /*GICH*/
|
||||
<0x0 0x0b004000 0x0 0x1000>; /*GICV*/
|
||||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
watchdog@b017000 {
|
||||
compatible = "qcom,kpss-wdt";
|
||||
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
|
||||
reg = <0x0b017000 0x40>;
|
||||
reg = <0x0 0x0b017000 0x0 0x40>;
|
||||
clocks = <&sleep_clk>;
|
||||
timeout-sec = <10>;
|
||||
};
|
||||
|
||||
apcs_glb: mailbox@b111000 {
|
||||
compatible = "qcom,ipq6018-apcs-apps-global";
|
||||
reg = <0x0b111000 0x1000>;
|
||||
reg = <0x0 0x0b111000 0x0 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&a53pll>, <&xo>;
|
||||
clock-names = "pll", "xo";
|
||||
@ -362,7 +362,7 @@
|
||||
|
||||
a53pll: clock@b116000 {
|
||||
compatible = "qcom,ipq6018-a53pll";
|
||||
reg = <0x0b116000 0x40>;
|
||||
reg = <0x0 0x0b116000 0x0 0x40>;
|
||||
#clock-cells = <0>;
|
||||
clocks = <&xo>;
|
||||
clock-names = "xo";
|
||||
@ -377,68 +377,68 @@
|
||||
};
|
||||
|
||||
timer@b120000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
compatible = "arm,armv7-timer-mem";
|
||||
reg = <0x0b120000 0x1000>;
|
||||
reg = <0x0 0x0b120000 0x0 0x1000>;
|
||||
clock-frequency = <19200000>;
|
||||
|
||||
frame@b120000 {
|
||||
frame-number = <0>;
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b121000 0x1000>,
|
||||
<0x0b122000 0x1000>;
|
||||
reg = <0x0 0x0b121000 0x0 0x1000>,
|
||||
<0x0 0x0b122000 0x0 0x1000>;
|
||||
};
|
||||
|
||||
frame@b123000 {
|
||||
frame-number = <1>;
|
||||
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0xb123000 0x1000>;
|
||||
reg = <0x0 0xb123000 0x0 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b124000 {
|
||||
frame-number = <2>;
|
||||
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b124000 0x1000>;
|
||||
reg = <0x0 0x0b124000 0x0 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b125000 {
|
||||
frame-number = <3>;
|
||||
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b125000 0x1000>;
|
||||
reg = <0x0 0x0b125000 0x0 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b126000 {
|
||||
frame-number = <4>;
|
||||
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b126000 0x1000>;
|
||||
reg = <0x0 0x0b126000 0x0 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b127000 {
|
||||
frame-number = <5>;
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b127000 0x1000>;
|
||||
reg = <0x0 0x0b127000 0x0 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b128000 {
|
||||
frame-number = <6>;
|
||||
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b128000 0x1000>;
|
||||
reg = <0x0 0x0b128000 0x0 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
q6v5_wcss: remoteproc@cd00000 {
|
||||
compatible = "qcom,ipq8074-wcss-pil";
|
||||
reg = <0x0cd00000 0x4040>,
|
||||
<0x004ab000 0x20>;
|
||||
reg = <0x0 0x0cd00000 0x0 0x4040>,
|
||||
<0x0 0x004ab000 0x0 0x20>;
|
||||
reg-names = "qdsp6",
|
||||
"rmb";
|
||||
interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
|
||||
|
||||
Loading…
Reference in New Issue
Block a user