Linux 5.19-rc6

-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmLLR2MeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG+hMH/jKGMOAbicR/CRq8
 WLKmpb1eTJP2dbeiEs5amBk9DZQhqjx6tIQRCpZoGxBL+XWq7DX2fRLkAT56yS5/
 NwferpR6IR9GlhjbfczF0JuQkP6eRUXnLrIKS5MViLI5QrCI80kkj4/mdqUXSiBV
 cMfXl5T1j+pb3zHUVXjnmvY+77q6rZTPoGxa/l8d6MaIhAg+jhu2E1HaSaSCX/YK
 TViq7ciI9cXoFV9yqhLkkBdGjBV8VQsKmeWEcA738bdSy1WAJSV1SVTJqLFvwdPI
 PM1asxkPoQ7jRrwsY4G8pZ3zPskJMS4Qwdn64HK+no2AKhJt2p6MePD1XblcrGHK
 QNStMY0=
 =LfuD
 -----END PGP SIGNATURE-----

Backmerge tag 'v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Backmerge in rc6 so I can merge msm next easier.

Linux 5.19-rc6

Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit is contained in:
Dave Airlie 2022-07-13 10:54:56 +10:00
commit e23a5e14aa
1000 changed files with 13040 additions and 8014 deletions

View File

@ -10,6 +10,8 @@
# Please keep this list dictionary sorted.
#
Aaron Durbin <adurbin@google.com>
Abel Vesa <abelvesa@kernel.org> <abel.vesa@nxp.com>
Abel Vesa <abelvesa@kernel.org> <abelvesa@gmail.com>
Abhinav Kumar <quic_abhinavk@quicinc.com> <abhinavk@codeaurora.org>
Adam Oldham <oldhamca@gmail.com>
Adam Radford <aradford@gmail.com>
@ -62,6 +64,9 @@ Bart Van Assche <bvanassche@acm.org> <bart.vanassche@sandisk.com>
Bart Van Assche <bvanassche@acm.org> <bart.vanassche@wdc.com>
Ben Gardner <bgardner@wabtec.com>
Ben M Cahill <ben.m.cahill@intel.com>
Ben Widawsky <bwidawsk@kernel.org> <ben@bwidawsk.net>
Ben Widawsky <bwidawsk@kernel.org> <ben.widawsky@intel.com>
Ben Widawsky <bwidawsk@kernel.org> <benjamin.widawsky@intel.com>
Björn Steinbrink <B.Steinbrink@gmx.de>
Björn Töpel <bjorn@kernel.org> <bjorn.topel@gmail.com>
Björn Töpel <bjorn@kernel.org> <bjorn.topel@intel.com>
@ -85,6 +90,7 @@ Christian Borntraeger <borntraeger@linux.ibm.com> <borntrae@de.ibm.com>
Christian Brauner <brauner@kernel.org> <christian@brauner.io>
Christian Brauner <brauner@kernel.org> <christian.brauner@canonical.com>
Christian Brauner <brauner@kernel.org> <christian.brauner@ubuntu.com>
Christian Marangi <ansuelsmth@gmail.com>
Christophe Ricard <christophe.ricard@gmail.com>
Christoph Hellwig <hch@lst.de>
Colin Ian King <colin.king@intel.com> <colin.king@canonical.com>
@ -165,6 +171,7 @@ Jan Glauber <jan.glauber@gmail.com> <jang@de.ibm.com>
Jan Glauber <jan.glauber@gmail.com> <jang@linux.vnet.ibm.com>
Jan Glauber <jan.glauber@gmail.com> <jglauber@cavium.com>
Jarkko Sakkinen <jarkko@kernel.org> <jarkko.sakkinen@linux.intel.com>
Jarkko Sakkinen <jarkko@kernel.org> <jarkko@profian.com>
Jason Gunthorpe <jgg@ziepe.ca> <jgg@mellanox.com>
Jason Gunthorpe <jgg@ziepe.ca> <jgg@nvidia.com>
Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>

View File

@ -1,4 +1,4 @@
What: /sys/bus/iio/devices/iio:deviceX/conversion_mode
What: /sys/bus/iio/devices/iio:deviceX/in_conversion_mode
KernelVersion: 4.2
Contact: linux-iio@vger.kernel.org
Description:

View File

@ -526,6 +526,7 @@ What: /sys/devices/system/cpu/vulnerabilities
/sys/devices/system/cpu/vulnerabilities/srbds
/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
/sys/devices/system/cpu/vulnerabilities/itlb_multihit
/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
Date: January 2018
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Information about CPU vulnerabilities

View File

@ -17,3 +17,4 @@ are configurable at compile, boot or run time.
special-register-buffer-data-sampling.rst
core-scheduling.rst
l1d_flush.rst
processor_mmio_stale_data.rst

View File

@ -0,0 +1,246 @@
=========================================
Processor MMIO Stale Data Vulnerabilities
=========================================
Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O
(MMIO) vulnerabilities that can expose data. The sequences of operations for
exposing data range from simple to very complex. Because most of the
vulnerabilities require the attacker to have access to MMIO, many environments
are not affected. System environments using virtualization where MMIO access is
provided to untrusted guests may need mitigation. These vulnerabilities are
not transient execution attacks. However, these vulnerabilities may propagate
stale data into core fill buffers where the data can subsequently be inferred
by an unmitigated transient execution attack. Mitigation for these
vulnerabilities includes a combination of microcode update and software
changes, depending on the platform and usage model. Some of these mitigations
are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or
those used to mitigate Special Register Buffer Data Sampling (SRBDS).
Data Propagators
================
Propagators are operations that result in stale data being copied or moved from
one microarchitectural buffer or register to another. Processor MMIO Stale Data
Vulnerabilities are operations that may result in stale data being directly
read into an architectural, software-visible state or sampled from a buffer or
register.
Fill Buffer Stale Data Propagator (FBSDP)
-----------------------------------------
Stale data may propagate from fill buffers (FB) into the non-coherent portion
of the uncore on some non-coherent writes. Fill buffer propagation by itself
does not make stale data architecturally visible. Stale data must be propagated
to a location where it is subject to reading or sampling.
Sideband Stale Data Propagator (SSDP)
-------------------------------------
The sideband stale data propagator (SSDP) is limited to the client (including
Intel Xeon server E3) uncore implementation. The sideband response buffer is
shared by all client cores. For non-coherent reads that go to sideband
destinations, the uncore logic returns 64 bytes of data to the core, including
both requested data and unrequested stale data, from a transaction buffer and
the sideband response buffer. As a result, stale data from the sideband
response and transaction buffers may now reside in a core fill buffer.
Primary Stale Data Propagator (PSDP)
------------------------------------
The primary stale data propagator (PSDP) is limited to the client (including
Intel Xeon server E3) uncore implementation. Similar to the sideband response
buffer, the primary response buffer is shared by all client cores. For some
processors, MMIO primary reads will return 64 bytes of data to the core fill
buffer including both requested data and unrequested stale data. This is
similar to the sideband stale data propagator.
Vulnerabilities
===============
Device Register Partial Write (DRPW) (CVE-2022-21166)
-----------------------------------------------------
Some endpoint MMIO registers incorrectly handle writes that are smaller than
the register size. Instead of aborting the write or only copying the correct
subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than
specified by the write transaction may be written to the register. On
processors affected by FBSDP, this may expose stale data from the fill buffers
of the core that created the write transaction.
Shared Buffers Data Sampling (SBDS) (CVE-2022-21125)
----------------------------------------------------
After propagators may have moved data around the uncore and copied stale data
into client core fill buffers, processors affected by MFBDS can leak data from
the fill buffer. It is limited to the client (including Intel Xeon server E3)
uncore implementation.
Shared Buffers Data Read (SBDR) (CVE-2022-21123)
------------------------------------------------
It is similar to Shared Buffer Data Sampling (SBDS) except that the data is
directly read into the architectural software-visible state. It is limited to
the client (including Intel Xeon server E3) uncore implementation.
Affected Processors
===================
Not all the CPUs are affected by all the variants. For instance, most
processors for the server market (excluding Intel Xeon E3 processors) are
impacted by only Device Register Partial Write (DRPW).
Below is the list of affected Intel processors [#f1]_:
=================== ============ =========
Common name Family_Model Steppings
=================== ============ =========
HASWELL_X 06_3FH 2,4
SKYLAKE_L 06_4EH 3
BROADWELL_X 06_4FH All
SKYLAKE_X 06_55H 3,4,6,7,11
BROADWELL_D 06_56H 3,4,5
SKYLAKE 06_5EH 3
ICELAKE_X 06_6AH 4,5,6
ICELAKE_D 06_6CH 1
ICELAKE_L 06_7EH 5
ATOM_TREMONT_D 06_86H All
LAKEFIELD 06_8AH 1
KABYLAKE_L 06_8EH 9 to 12
ATOM_TREMONT 06_96H 1
ATOM_TREMONT_L 06_9CH 0
KABYLAKE 06_9EH 9 to 13
COMETLAKE 06_A5H 2,3,5
COMETLAKE_L 06_A6H 0,1
ROCKETLAKE 06_A7H 1
=================== ============ =========
If a CPU is in the affected processor list, but not affected by a variant, it
is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later
section, mitigation largely remains the same for all the variants, i.e. to
clear the CPU fill buffers via VERW instruction.
New bits in MSRs
================
Newer processors and microcode update on existing affected processors added new
bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
specific variants of Processor MMIO Stale Data vulnerabilities and mitigation
capability.
MSR IA32_ARCH_CAPABILITIES
--------------------------
Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the
Shared Buffers Data Read (SBDR) vulnerability or the sideband stale
data propagator (SSDP).
Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer
Stale Data Propagator (FBSDP).
Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data
Propagator (PSDP).
Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer
values as part of MD_CLEAR operations. Processors that do not
enumerate MDS_NO (meaning they are affected by MDS) but that do
enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate
FB_CLEAR as part of their MD_CLEAR support.
Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR
IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS
bit can be set to cause the VERW instruction to not perform the
FB_CLEAR action. Not all processors that support FB_CLEAR will support
FB_CLEAR_CTRL.
MSR IA32_MCU_OPT_CTRL
---------------------
Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR
action. This may be useful to reduce the performance impact of FB_CLEAR in
cases where system software deems it warranted (for example, when performance
is more critical, or the untrusted software has no MMIO access). Note that
FB_CLEAR_DIS has no impact on enumeration (for example, it does not change
FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors
that enumerate FB_CLEAR.
Mitigation
==========
Like MDS, all variants of Processor MMIO Stale Data vulnerabilities have the
same mitigation strategy to force the CPU to clear the affected buffers before
an attacker can extract the secrets.
This is achieved by using the otherwise unused and obsolete VERW instruction in
combination with a microcode update. The microcode clears the affected CPU
buffers when the VERW instruction is executed.
Kernel reuses the MDS function to invoke the buffer clearing:
mds_clear_cpu_buffers()
On MDS affected CPUs, the kernel already invokes CPU buffer clear on
kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
additional mitigation is needed on such CPUs.
For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker
with MMIO capability. Therefore, VERW is not required for kernel/userspace. For
virtualization case, VERW is only needed at VMENTER for a guest with MMIO
capability.
Mitigation points
-----------------
Return to user space
^^^^^^^^^^^^^^^^^^^^
Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation
needed.
C-State transition
^^^^^^^^^^^^^^^^^^
Control register writes by CPU during C-state transition can propagate data
from fill buffer to uncore buffers. Execute VERW before C-state transition to
clear CPU fill buffers.
Guest entry point
^^^^^^^^^^^^^^^^^
Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise
execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by
MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO
Stale Data vulnerabilities, so there is no need to execute VERW for such guests.
Mitigation control on the kernel command line
---------------------------------------------
The kernel command line allows to control the Processor MMIO Stale Data
mitigations at boot time with the option "mmio_stale_data=". The valid
arguments for this option are:
========== =================================================================
full If the CPU is vulnerable, enable mitigation; CPU buffer clearing
on exit to userspace and when entering a VM. Idle transitions are
protected as well. It does not automatically disable SMT.
full,nosmt Same as full, with SMT disabled on vulnerable CPUs. This is the
complete mitigation.
off Disables mitigation completely.
========== =================================================================
If the CPU is affected and mmio_stale_data=off is not supplied on the kernel
command line, then the kernel selects the appropriate mitigation.
Mitigation status information
-----------------------------
The Linux kernel provides a sysfs interface to enumerate the current
vulnerability status of the system: whether the system is vulnerable, and
which mitigations are active. The relevant sysfs file is:
/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
The possible values in this file are:
.. list-table::
* - 'Not affected'
- The processor is not vulnerable
* - 'Vulnerable'
- The processor is vulnerable, but no mitigation enabled
* - 'Vulnerable: Clear CPU buffers attempted, no microcode'
- The processor is vulnerable, but microcode is not updated. The
mitigation is enabled on a best effort basis.
* - 'Mitigation: Clear CPU buffers'
- The processor is vulnerable and the CPU buffer clearing mitigation is
enabled.
If the processor is vulnerable then the following information is appended to
the above information:
======================== ===========================================
'SMT vulnerable' SMT is enabled
'SMT disabled' SMT is disabled
'SMT Host state unknown' Kernel runs in a VM, Host SMT state unknown
======================== ===========================================
References
----------
.. [#f1] Affected Processors
https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html

View File

@ -2469,7 +2469,6 @@
protected: nVHE-based mode with support for guests whose
state is kept private from the host.
Not valid if the kernel is running in EL2.
Defaults to VHE/nVHE based on hardware support. Setting
mode to "protected" will disable kexec and hibernation
@ -3176,6 +3175,7 @@
srbds=off [X86,INTEL]
no_entry_flush [PPC]
no_uaccess_flush [PPC]
mmio_stale_data=off [X86]
Exceptions:
This does not have any effect on
@ -3197,6 +3197,7 @@
Equivalent to: l1tf=flush,nosmt [X86]
mds=full,nosmt [X86]
tsx_async_abort=full,nosmt [X86]
mmio_stale_data=full,nosmt [X86]
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
@ -3206,6 +3207,40 @@
log everything. Information is printed at KERN_DEBUG
so loglevel=8 may also need to be specified.
mmio_stale_data=
[X86,INTEL] Control mitigation for the Processor
MMIO Stale Data vulnerabilities.
Processor MMIO Stale Data is a class of
vulnerabilities that may expose data after an MMIO
operation. Exposed data could originate or end in
the same CPU buffers as affected by MDS and TAA.
Therefore, similar to MDS and TAA, the mitigation
is to clear the affected CPU buffers.
This parameter controls the mitigation. The
options are:
full - Enable mitigation on vulnerable CPUs
full,nosmt - Enable mitigation and disable SMT on
vulnerable CPUs.
off - Unconditionally disable mitigation
On MDS or TAA affected machines,
mmio_stale_data=off can be prevented by an active
MDS or TAA mitigation as these vulnerabilities are
mitigated with the same mechanism so in order to
disable this mitigation, you need to specify
mds=off and tsx_async_abort=off too.
Not specifying this option is equivalent to
mmio_stale_data=full.
For details see:
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
module.sig_enforce
[KNL] When CONFIG_MODULE_SIG is set, this means that
modules without (valid) signatures will fail to load.

View File

@ -67,7 +67,7 @@ if:
then:
properties:
clocks:
maxItems: 2
minItems: 2
required:
- clock-names

View File

@ -40,9 +40,8 @@ properties:
value to be used for converting remote channel measurements to
temperature.
$ref: /schemas/types.yaml#/definitions/int32
items:
minimum: -128
maximum: 127
minimum: -128
maximum: 127
ti,beta-compensation:
description:

View File

@ -30,6 +30,7 @@ properties:
- socionext,uniphier-ld11-aidet
- socionext,uniphier-ld20-aidet
- socionext,uniphier-pxs3-aidet
- socionext,uniphier-nx1-aidet
reg:
maxItems: 1

View File

@ -47,6 +47,5 @@ examples:
clocks = <&clkcfg CLK_SPI0>;
interrupt-parent = <&plic>;
interrupts = <54>;
spi-max-frequency = <25000000>;
};
...

View File

@ -110,7 +110,6 @@ examples:
pinctrl-names = "default";
pinctrl-0 = <&qup_spi1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <0>;
};

View File

@ -136,7 +136,8 @@ properties:
Phandle of a companion.
phys:
maxItems: 1
minItems: 1
maxItems: 3
phy-names:
const: usb

View File

@ -103,7 +103,8 @@ properties:
Overrides the detected port count
phys:
maxItems: 1
minItems: 1
maxItems: 3
phy-names:
const: usb

View File

@ -6,7 +6,7 @@ This document explains how GPIOs can be assigned to given devices and functions.
Note that it only applies to the new descriptor-based interface. For a
description of the deprecated integer-based GPIO interface please refer to
gpio-legacy.txt (actually, there is no real mapping possible with the old
legacy.rst (actually, there is no real mapping possible with the old
interface; you just fetch an integer from somewhere and request the
corresponding GPIO).

View File

@ -4,7 +4,7 @@ GPIO Descriptor Consumer Interface
This document describes the consumer interface of the GPIO framework. Note that
it describes the new descriptor-based interface. For a description of the
deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
deprecated integer-based GPIO interface please refer to legacy.rst.
Guidelines for GPIOs consumers
@ -78,7 +78,7 @@ whether the line is configured active high or active low (see
The two last flags are used for use cases where open drain is mandatory, such
as I2C: if the line is not already configured as open drain in the mappings
(see board.txt), then open drain will be enforced anyway and a warning will be
(see board.rst), then open drain will be enforced anyway and a warning will be
printed that the board configuration needs to be updated to match the use case.
Both functions return either a valid GPIO descriptor, or an error code checkable
@ -270,7 +270,7 @@ driven.
The same is applicable for open drain or open source output lines: those do not
actively drive their output high (open drain) or low (open source), they just
switch their output to a high impedance value. The consumer should not need to
care. (For details read about open drain in driver.txt.)
care. (For details read about open drain in driver.rst.)
With this, all the gpiod_set_(array)_value_xxx() functions interpret the
parameter "value" as "asserted" ("1") or "de-asserted" ("0"). The physical line

View File

@ -14,12 +14,12 @@ Due to the history of GPIO interfaces in the kernel, there are two different
ways to obtain and use GPIOs:
- The descriptor-based interface is the preferred way to manipulate GPIOs,
and is described by all the files in this directory excepted gpio-legacy.txt.
and is described by all the files in this directory excepted legacy.rst.
- The legacy integer-based interface which is considered deprecated (but still
usable for compatibility reasons) is documented in gpio-legacy.txt.
usable for compatibility reasons) is documented in legacy.rst.
The remainder of this document applies to the new descriptor-based interface.
gpio-legacy.txt contains the same information applied to the legacy
legacy.rst contains the same information applied to the legacy
integer-based interface.

View File

@ -19,13 +19,23 @@ The main Btrfs features include:
* Subvolumes (separate internal filesystem roots)
* Object level mirroring and striping
* Checksums on data and metadata (multiple algorithms available)
* Compression
* Compression (multiple algorithms available)
* Reflink, deduplication
* Scrub (on-line checksum verification)
* Hierarchical quota groups (subvolume and snapshot support)
* Integrated multiple device support, with several raid algorithms
* Offline filesystem check
* Efficient incremental backup and FS mirroring
* Efficient incremental backup and FS mirroring (send/receive)
* Trim/discard
* Online filesystem defragmentation
* Swapfile support
* Zoned mode
* Read/write metadata verification
* Online resize (shrink, grow)
For more information please refer to the wiki
For more information please refer to the documentation site or wiki
https://btrfs.readthedocs.io
https://btrfs.wiki.kernel.org

View File

@ -13,8 +13,8 @@ disappeared as of Linux 3.0.
There are two places where extended attributes can be found. The first
place is between the end of each inode entry and the beginning of the
next inode entry. For example, if inode.i\_extra\_isize = 28 and
sb.inode\_size = 256, then there are 256 - (128 + 28) = 100 bytes
next inode entry. For example, if inode.i_extra_isize = 28 and
sb.inode_size = 256, then there are 256 - (128 + 28) = 100 bytes
available for in-inode extended attribute storage. The second place
where extended attributes can be found is in the block pointed to by
``inode.i_file_acl``. As of Linux 3.11, it is not possible for this
@ -38,8 +38,8 @@ Extended attributes, when stored after the inode, have a header
- Name
- Description
* - 0x0
- \_\_le32
- h\_magic
- __le32
- h_magic
- Magic number for identification, 0xEA020000. This value is set by the
Linux driver, though e2fsprogs doesn't seem to check it(?)
@ -55,28 +55,28 @@ The beginning of an extended attribute block is in
- Name
- Description
* - 0x0
- \_\_le32
- h\_magic
- __le32
- h_magic
- Magic number for identification, 0xEA020000.
* - 0x4
- \_\_le32
- h\_refcount
- __le32
- h_refcount
- Reference count.
* - 0x8
- \_\_le32
- h\_blocks
- __le32
- h_blocks
- Number of disk blocks used.
* - 0xC
- \_\_le32
- h\_hash
- __le32
- h_hash
- Hash value of all attributes.
* - 0x10
- \_\_le32
- h\_checksum
- __le32
- h_checksum
- Checksum of the extended attribute block.
* - 0x14
- \_\_u32
- h\_reserved[3]
- __u32
- h_reserved[3]
- Zero.
The checksum is calculated against the FS UUID, the 64-bit block number
@ -100,46 +100,46 @@ Attributes stored inside an inode do not need be stored in sorted order.
- Name
- Description
* - 0x0
- \_\_u8
- e\_name\_len
- __u8
- e_name_len
- Length of name.
* - 0x1
- \_\_u8
- e\_name\_index
- __u8
- e_name_index
- Attribute name index. There is a discussion of this below.
* - 0x2
- \_\_le16
- e\_value\_offs
- __le16
- e_value_offs
- Location of this attribute's value on the disk block where it is stored.
Multiple attributes can share the same value. For an inode attribute
this value is relative to the start of the first entry; for a block this
value is relative to the start of the block (i.e. the header).
* - 0x4
- \_\_le32
- e\_value\_inum
- __le32
- e_value_inum
- The inode where the value is stored. Zero indicates the value is in the
same block as this entry. This field is only used if the
INCOMPAT\_EA\_INODE feature is enabled.
INCOMPAT_EA_INODE feature is enabled.
* - 0x8
- \_\_le32
- e\_value\_size
- __le32
- e_value_size
- Length of attribute value.
* - 0xC
- \_\_le32
- e\_hash
- __le32
- e_hash
- Hash value of attribute name and attribute value. The kernel doesn't
update the hash for in-inode attributes, so for that case this value
must be zero, because e2fsck validates any non-zero hash regardless of
where the xattr lives.
* - 0x10
- char
- e\_name[e\_name\_len]
- e_name[e_name_len]
- Attribute name. Does not include trailing NULL.
Attribute values can follow the end of the entry table. There appears to
be a requirement that they be aligned to 4-byte boundaries. The values
are stored starting at the end of the block and grow towards the
xattr\_header/xattr\_entry table. When the two collide, the overflow is
xattr_header/xattr_entry table. When the two collide, the overflow is
put into a separate disk block. If the disk block fills up, the
filesystem returns -ENOSPC.
@ -167,15 +167,15 @@ the key name. Here is a map of name index values to key prefixes:
* - 1
- “user.”
* - 2
- “system.posix\_acl\_access”
- “system.posix_acl_access”
* - 3
- “system.posix\_acl\_default”
- “system.posix_acl_default”
* - 4
- “trusted.”
* - 6
- “security.”
* - 7
- “system.” (inline\_data only?)
- “system.” (inline_data only?)
* - 8
- “system.richacl” (SuSE kernels only?)

View File

@ -23,7 +23,7 @@ means that a block group addresses 32 gigabytes instead of 128 megabytes,
also shrinking the amount of file system overhead for metadata.
The administrator can set a block cluster size at mkfs time (which is
stored in the s\_log\_cluster\_size field in the superblock); from then
stored in the s_log_cluster_size field in the superblock); from then
on, the block bitmaps track clusters, not individual blocks. This means
that block groups can be several gigabytes in size (instead of just
128MiB); however, the minimum allocation unit becomes a cluster, not a

View File

@ -9,15 +9,15 @@ group.
The inode bitmap records which entries in the inode table are in use.
As with most bitmaps, one bit represents the usage status of one data
block or inode table entry. This implies a block group size of 8 \*
number\_of\_bytes\_in\_a\_logical\_block.
block or inode table entry. This implies a block group size of 8 *
number_of_bytes_in_a_logical_block.
NOTE: If ``BLOCK_UNINIT`` is set for a given block group, various parts
of the kernel and e2fsprogs code pretends that the block bitmap contains
zeros (i.e. all blocks in the group are free). However, it is not
necessarily the case that no blocks are in use -- if ``meta_bg`` is set,
the bitmaps and group descriptor live inside the group. Unfortunately,
ext2fs\_test\_block\_bitmap2() will return '0' for those locations,
ext2fs_test_block_bitmap2() will return '0' for those locations,
which produces confusing debugfs output.
Inode Table

View File

@ -56,39 +56,39 @@ established that the super block and the group descriptor table, if
present, will be at the beginning of the block group. The bitmaps and
the inode table can be anywhere, and it is quite possible for the
bitmaps to come after the inode table, or for both to be in different
groups (flex\_bg). Leftover space is used for file data blocks, indirect
groups (flex_bg). Leftover space is used for file data blocks, indirect
block maps, extent tree blocks, and extended attributes.
Flexible Block Groups
---------------------
Starting in ext4, there is a new feature called flexible block groups
(flex\_bg). In a flex\_bg, several block groups are tied together as one
(flex_bg). In a flex_bg, several block groups are tied together as one
logical block group; the bitmap spaces and the inode table space in the
first block group of the flex\_bg are expanded to include the bitmaps
and inode tables of all other block groups in the flex\_bg. For example,
if the flex\_bg size is 4, then group 0 will contain (in order) the
first block group of the flex_bg are expanded to include the bitmaps
and inode tables of all other block groups in the flex_bg. For example,
if the flex_bg size is 4, then group 0 will contain (in order) the
superblock, group descriptors, data block bitmaps for groups 0-3, inode
bitmaps for groups 0-3, inode tables for groups 0-3, and the remaining
space in group 0 is for file data. The effect of this is to group the
block group metadata close together for faster loading, and to enable
large files to be continuous on disk. Backup copies of the superblock
and group descriptors are always at the beginning of block groups, even
if flex\_bg is enabled. The number of block groups that make up a
flex\_bg is given by 2 ^ ``sb.s_log_groups_per_flex``.
if flex_bg is enabled. The number of block groups that make up a
flex_bg is given by 2 ^ ``sb.s_log_groups_per_flex``.
Meta Block Groups
-----------------
Without the option META\_BG, for safety concerns, all block group
Without the option META_BG, for safety concerns, all block group
descriptors copies are kept in the first block group. Given the default
128MiB(2^27 bytes) block group size and 64-byte group descriptors, ext4
can have at most 2^27/64 = 2^21 block groups. This limits the entire
filesystem size to 2^21 * 2^27 = 2^48bytes or 256TiB.
The solution to this problem is to use the metablock group feature
(META\_BG), which is already in ext3 for all 2.6 releases. With the
META\_BG feature, ext4 filesystems are partitioned into many metablock
(META_BG), which is already in ext3 for all 2.6 releases. With the
META_BG feature, ext4 filesystems are partitioned into many metablock
groups. Each metablock group is a cluster of block groups whose group
descriptor structures can be stored in a single disk block. For ext4
filesystems with 4 KB block size, a single metablock group partition
@ -110,7 +110,7 @@ bytes, a meta-block group contains 32 block groups for filesystems with
a 1KB block size, and 128 block groups for filesystems with a 4KB
blocksize. Filesystems can either be created using this new block group
descriptor layout, or existing filesystems can be resized on-line, and
the field s\_first\_meta\_bg in the superblock will indicate the first
the field s_first_meta_bg in the superblock will indicate the first
block group using this new layout.
Please see an important note about ``BLOCK_UNINIT`` in the section about
@ -121,15 +121,15 @@ Lazy Block Group Initialization
A new feature for ext4 are three block group descriptor flags that
enable mkfs to skip initializing other parts of the block group
metadata. Specifically, the INODE\_UNINIT and BLOCK\_UNINIT flags mean
metadata. Specifically, the INODE_UNINIT and BLOCK_UNINIT flags mean
that the inode and block bitmaps for that group can be calculated and
therefore the on-disk bitmap blocks are not initialized. This is
generally the case for an empty block group or a block group containing
only fixed-location block group metadata. The INODE\_ZEROED flag means
only fixed-location block group metadata. The INODE_ZEROED flag means
that the inode table has been initialized; mkfs will unset this flag and
rely on the kernel to initialize the inode tables in the background.
By not writing zeroes to the bitmaps and inode table, mkfs time is
reduced considerably. Note the feature flag is RO\_COMPAT\_GDT\_CSUM,
but the dumpe2fs output prints this as “uninit\_bg”. They are the same
reduced considerably. Note the feature flag is RO_COMPAT_GDT_CSUM,
but the dumpe2fs output prints this as “uninit_bg”. They are the same
thing.

View File

@ -1,7 +1,7 @@
.. SPDX-License-Identifier: GPL-2.0
+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| i.i\_block Offset | Where It Points |
| i.i_block Offset | Where It Points |
+=====================+==============================================================================================================================================================================================================================+
| 0 to 11 | Direct map to file blocks 0 to 11. |
+---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+

View File

@ -4,7 +4,7 @@ Checksums
---------
Starting in early 2012, metadata checksums were added to all major ext4
and jbd2 data structures. The associated feature flag is metadata\_csum.
and jbd2 data structures. The associated feature flag is metadata_csum.
The desired checksum algorithm is indicated in the superblock, though as
of October 2012 the only supported algorithm is crc32c. Some data
structures did not have space to fit a full 32-bit checksum, so only the
@ -20,7 +20,7 @@ encounters directory blocks that lack sufficient empty space to add a
checksum, it will request that you run ``e2fsck -D`` to have the
directories rebuilt with checksums. This has the added benefit of
removing slack space from the directory files and rebalancing the htree
indexes. If you \_ignore\_ this step, your directories will not be
indexes. If you _ignore_ this step, your directories will not be
protected by a checksum!
The following table describes the data elements that go into each type
@ -35,39 +35,39 @@ of checksum. The checksum function is whatever the superblock describes
- Length
- Ingredients
* - Superblock
- \_\_le32
- __le32
- The entire superblock up to the checksum field. The UUID lives inside
the superblock.
* - MMP
- \_\_le32
- __le32
- UUID + the entire MMP block up to the checksum field.
* - Extended Attributes
- \_\_le32
- __le32
- UUID + the entire extended attribute block. The checksum field is set to
zero.
* - Directory Entries
- \_\_le32
- __le32
- UUID + inode number + inode generation + the directory block up to the
fake entry enclosing the checksum field.
* - HTREE Nodes
- \_\_le32
- __le32
- UUID + inode number + inode generation + all valid extents + HTREE tail.
The checksum field is set to zero.
* - Extents
- \_\_le32
- __le32
- UUID + inode number + inode generation + the entire extent block up to
the checksum field.
* - Bitmaps
- \_\_le32 or \_\_le16
- __le32 or __le16
- UUID + the entire bitmap. Checksums are stored in the group descriptor,
and truncated if the group descriptor size is 32 bytes (i.e. ^64bit)
* - Inodes
- \_\_le32
- __le32
- UUID + inode number + inode generation + the entire inode. The checksum
field is set to zero. Each inode has its own checksum.
* - Group Descriptors
- \_\_le16
- If metadata\_csum, then UUID + group number + the entire descriptor;
else if gdt\_csum, then crc16(UUID + group number + the entire
- __le16
- If metadata_csum, then UUID + group number + the entire descriptor;
else if gdt_csum, then crc16(UUID + group number + the entire
descriptor). In all cases, only the lower 16 bits are stored.

View File

@ -42,24 +42,24 @@ is at most 263 bytes long, though on disk you'll need to reference
- Name
- Description
* - 0x0
- \_\_le32
- __le32
- inode
- Number of the inode that this directory entry points to.
* - 0x4
- \_\_le16
- rec\_len
- __le16
- rec_len
- Length of this directory entry. Must be a multiple of 4.
* - 0x6
- \_\_le16
- name\_len
- __le16
- name_len
- Length of the file name.
* - 0x8
- char
- name[EXT4\_NAME\_LEN]
- name[EXT4_NAME_LEN]
- File name.
Since file names cannot be longer than 255 bytes, the new directory
entry format shortens the name\_len field and uses the space for a file
entry format shortens the name_len field and uses the space for a file
type flag, probably to avoid having to load every inode during directory
tree traversal. This format is ``ext4_dir_entry_2``, which is at most
263 bytes long, though on disk you'll need to reference
@ -74,24 +74,24 @@ tree traversal. This format is ``ext4_dir_entry_2``, which is at most
- Name
- Description
* - 0x0
- \_\_le32
- __le32
- inode
- Number of the inode that this directory entry points to.
* - 0x4
- \_\_le16
- rec\_len
- __le16
- rec_len
- Length of this directory entry.
* - 0x6
- \_\_u8
- name\_len
- __u8
- name_len
- Length of the file name.
* - 0x7
- \_\_u8
- file\_type
- __u8
- file_type
- File type code, see ftype_ table below.
* - 0x8
- char
- name[EXT4\_NAME\_LEN]
- name[EXT4_NAME_LEN]
- File name.
.. _ftype:
@ -137,19 +137,19 @@ entry uses this extension, it may be up to 271 bytes.
- Name
- Description
* - 0x0
- \_\_le32
- __le32
- hash
- The hash of the directory name
* - 0x4
- \_\_le32
- minor\_hash
- __le32
- minor_hash
- The minor hash of the directory name
In order to add checksums to these classic directory blocks, a phony
``struct ext4_dir_entry`` is placed at the end of each leaf block to
hold the checksum. The directory entry is 12 bytes long. The inode
number and name\_len fields are set to zero to fool old software into
number and name_len fields are set to zero to fool old software into
ignoring an apparently empty directory entry, and the checksum is stored
in the place where the name normally goes. The structure is
``struct ext4_dir_entry_tail``:
@ -163,24 +163,24 @@ in the place where the name normally goes. The structure is
- Name
- Description
* - 0x0
- \_\_le32
- det\_reserved\_zero1
- __le32
- det_reserved_zero1
- Inode number, which must be zero.
* - 0x4
- \_\_le16
- det\_rec\_len
- __le16
- det_rec_len
- Length of this directory entry, which must be 12.
* - 0x6
- \_\_u8
- det\_reserved\_zero2
- __u8
- det_reserved_zero2
- Length of the file name, which must be zero.
* - 0x7
- \_\_u8
- det\_reserved\_ft
- __u8
- det_reserved_ft
- File type, which must be 0xDE.
* - 0x8
- \_\_le32
- det\_checksum
- __le32
- det_checksum
- Directory leaf block checksum.
The leaf directory block checksum is calculated against the FS UUID, the
@ -194,7 +194,7 @@ Hash Tree Directories
A linear array of directory entries isn't great for performance, so a
new feature was added to ext3 to provide a faster (but peculiar)
balanced tree keyed off a hash of the directory entry name. If the
EXT4\_INDEX\_FL (0x1000) flag is set in the inode, this directory uses a
EXT4_INDEX_FL (0x1000) flag is set in the inode, this directory uses a
hashed btree (htree) to organize and find directory entries. For
backwards read-only compatibility with ext2, this tree is actually
hidden inside the directory file, masquerading as “empty” directory data
@ -206,14 +206,14 @@ rest of the directory block is empty so that it moves on.
The root of the tree always lives in the first data block of the
directory. By ext2 custom, the '.' and '..' entries must appear at the
beginning of this first block, so they are put here as two
``struct ext4_dir_entry_2``\ s and not stored in the tree. The rest of
``struct ext4_dir_entry_2`` s and not stored in the tree. The rest of
the root node contains metadata about the tree and finally a hash->block
map to find nodes that are lower in the htree. If
``dx_root.info.indirect_levels`` is non-zero then the htree has two
levels; the data block pointed to by the root node's map is an interior
node, which is indexed by a minor hash. Interior nodes in this tree
contains a zeroed out ``struct ext4_dir_entry_2`` followed by a
minor\_hash->block map to find leafe nodes. Leaf nodes contain a linear
minor_hash->block map to find leafe nodes. Leaf nodes contain a linear
array of all ``struct ext4_dir_entry_2``; all of these entries
(presumably) hash to the same value. If there is an overflow, the
entries simply overflow into the next leaf node, and the
@ -245,83 +245,83 @@ of a data block:
- Name
- Description
* - 0x0
- \_\_le32
- __le32
- dot.inode
- inode number of this directory.
* - 0x4
- \_\_le16
- dot.rec\_len
- __le16
- dot.rec_len
- Length of this record, 12.
* - 0x6
- u8
- dot.name\_len
- dot.name_len
- Length of the name, 1.
* - 0x7
- u8
- dot.file\_type
- dot.file_type
- File type of this entry, 0x2 (directory) (if the feature flag is set).
* - 0x8
- char
- dot.name[4]
- “.\\0\\0\\0”
- “.\0\0\0”
* - 0xC
- \_\_le32
- __le32
- dotdot.inode
- inode number of parent directory.
* - 0x10
- \_\_le16
- dotdot.rec\_len
- block\_size - 12. The record length is long enough to cover all htree
- __le16
- dotdot.rec_len
- block_size - 12. The record length is long enough to cover all htree
data.
* - 0x12
- u8
- dotdot.name\_len
- dotdot.name_len
- Length of the name, 2.
* - 0x13
- u8
- dotdot.file\_type
- dotdot.file_type
- File type of this entry, 0x2 (directory) (if the feature flag is set).
* - 0x14
- char
- dotdot\_name[4]
- “..\\0\\0”
- dotdot_name[4]
- “..\0\0”
* - 0x18
- \_\_le32
- struct dx\_root\_info.reserved\_zero
- __le32
- struct dx_root_info.reserved_zero
- Zero.
* - 0x1C
- u8
- struct dx\_root\_info.hash\_version
- struct dx_root_info.hash_version
- Hash type, see dirhash_ table below.
* - 0x1D
- u8
- struct dx\_root\_info.info\_length
- struct dx_root_info.info_length
- Length of the tree information, 0x8.
* - 0x1E
- u8
- struct dx\_root\_info.indirect\_levels
- Depth of the htree. Cannot be larger than 3 if the INCOMPAT\_LARGEDIR
- struct dx_root_info.indirect_levels
- Depth of the htree. Cannot be larger than 3 if the INCOMPAT_LARGEDIR
feature is set; cannot be larger than 2 otherwise.
* - 0x1F
- u8
- struct dx\_root\_info.unused\_flags
- struct dx_root_info.unused_flags
-
* - 0x20
- \_\_le16
- __le16
- limit
- Maximum number of dx\_entries that can follow this header, plus 1 for
- Maximum number of dx_entries that can follow this header, plus 1 for
the header itself.
* - 0x22
- \_\_le16
- __le16
- count
- Actual number of dx\_entries that follow this header, plus 1 for the
- Actual number of dx_entries that follow this header, plus 1 for the
header itself.
* - 0x24
- \_\_le32
- __le32
- block
- The block number (within the directory file) that goes with hash=0.
* - 0x28
- struct dx\_entry
- struct dx_entry
- entries[0]
- As many 8-byte ``struct dx_entry`` as fits in the rest of the data block.
@ -362,38 +362,38 @@ also the full length of a data block:
- Name
- Description
* - 0x0
- \_\_le32
- __le32
- fake.inode
- Zero, to make it look like this entry is not in use.
* - 0x4
- \_\_le16
- fake.rec\_len
- The size of the block, in order to hide all of the dx\_node data.
- __le16
- fake.rec_len
- The size of the block, in order to hide all of the dx_node data.
* - 0x6
- u8
- name\_len
- name_len
- Zero. There is no name for this “unused” directory entry.
* - 0x7
- u8
- file\_type
- file_type
- Zero. There is no file type for this “unused” directory entry.
* - 0x8
- \_\_le16
- __le16
- limit
- Maximum number of dx\_entries that can follow this header, plus 1 for
- Maximum number of dx_entries that can follow this header, plus 1 for
the header itself.
* - 0xA
- \_\_le16
- __le16
- count
- Actual number of dx\_entries that follow this header, plus 1 for the
- Actual number of dx_entries that follow this header, plus 1 for the
header itself.
* - 0xE
- \_\_le32
- __le32
- block
- The block number (within the directory file) that goes with the lowest
hash value of this block. This value is stored in the parent block.
* - 0x12
- struct dx\_entry
- struct dx_entry
- entries[0]
- As many 8-byte ``struct dx_entry`` as fits in the rest of the data block.
@ -410,11 +410,11 @@ long:
- Name
- Description
* - 0x0
- \_\_le32
- __le32
- hash
- Hash code.
* - 0x4
- \_\_le32
- __le32
- block
- Block number (within the directory file, not filesystem blocks) of the
next node in the htree.
@ -423,13 +423,13 @@ long:
author.)
If metadata checksums are enabled, the last 8 bytes of the directory
block (precisely the length of one dx\_entry) are used to store a
block (precisely the length of one dx_entry) are used to store a
``struct dx_tail``, which contains the checksum. The ``limit`` and
``count`` entries in the dx\_root/dx\_node structures are adjusted as
necessary to fit the dx\_tail into the block. If there is no space for
the dx\_tail, the user is notified to run e2fsck -D to rebuild the
``count`` entries in the dx_root/dx_node structures are adjusted as
necessary to fit the dx_tail into the block. If there is no space for
the dx_tail, the user is notified to run e2fsck -D to rebuild the
directory index (which will ensure that there's space for the checksum.
The dx\_tail structure is 8 bytes long and looks like this:
The dx_tail structure is 8 bytes long and looks like this:
.. list-table::
:widths: 8 8 24 40
@ -441,13 +441,13 @@ The dx\_tail structure is 8 bytes long and looks like this:
- Description
* - 0x0
- u32
- dt\_reserved
- dt_reserved
- Zero.
* - 0x4
- \_\_le32
- dt\_checksum
- __le32
- dt_checksum
- Checksum of the htree directory block.
The checksum is calculated against the FS UUID, the htree index header
(dx\_root or dx\_node), all of the htree indices (dx\_entry) that are in
use, and the tail block (dx\_tail).
(dx_root or dx_node), all of the htree indices (dx_entry) that are in
use, and the tail block (dx_tail).

View File

@ -5,14 +5,14 @@ Large Extended Attribute Values
To enable ext4 to store extended attribute values that do not fit in the
inode or in the single extended attribute block attached to an inode,
the EA\_INODE feature allows us to store the value in the data blocks of
the EA_INODE feature allows us to store the value in the data blocks of
a regular file inode. This “EA inode” is linked only from the extended
attribute name index and must not appear in a directory entry. The
inode's i\_atime field is used to store a checksum of the xattr value;
and i\_ctime/i\_version store a 64-bit reference count, which enables
inode's i_atime field is used to store a checksum of the xattr value;
and i_ctime/i_version store a 64-bit reference count, which enables
sharing of large xattr values between multiple owning inodes. For
backward compatibility with older versions of this feature, the
i\_mtime/i\_generation *may* store a back-reference to the inode number
and i\_generation of the **one** owning inode (in cases where the EA
i_mtime/i_generation *may* store a back-reference to the inode number
and i_generation of the **one** owning inode (in cases where the EA
inode is not referenced by multiple inodes) to verify that the EA inode
is the correct one being accessed.

View File

@ -7,34 +7,34 @@ Each block group on the filesystem has one of these descriptors
associated with it. As noted in the Layout section above, the group
descriptors (if present) are the second item in the block group. The
standard configuration is for each block group to contain a full copy of
the block group descriptor table unless the sparse\_super feature flag
the block group descriptor table unless the sparse_super feature flag
is set.
Notice how the group descriptor records the location of both bitmaps and
the inode table (i.e. they can float). This means that within a block
group, the only data structures with fixed locations are the superblock
and the group descriptor table. The flex\_bg mechanism uses this
and the group descriptor table. The flex_bg mechanism uses this
property to group several block groups into a flex group and lay out all
of the groups' bitmaps and inode tables into one long run in the first
group of the flex group.
If the meta\_bg feature flag is set, then several block groups are
grouped together into a meta group. Note that in the meta\_bg case,
If the meta_bg feature flag is set, then several block groups are
grouped together into a meta group. Note that in the meta_bg case,
however, the first and last two block groups within the larger meta
group contain only group descriptors for the groups inside the meta
group.
flex\_bg and meta\_bg do not appear to be mutually exclusive features.
flex_bg and meta_bg do not appear to be mutually exclusive features.
In ext2, ext3, and ext4 (when the 64bit feature is not enabled), the
block group descriptor was only 32 bytes long and therefore ends at
bg\_checksum. On an ext4 filesystem with the 64bit feature enabled, the
bg_checksum. On an ext4 filesystem with the 64bit feature enabled, the
block group descriptor expands to at least the 64 bytes described below;
the size is stored in the superblock.
If gdt\_csum is set and metadata\_csum is not set, the block group
If gdt_csum is set and metadata_csum is not set, the block group
checksum is the crc16 of the FS UUID, the group number, and the group
descriptor structure. If metadata\_csum is set, then the block group
descriptor structure. If metadata_csum is set, then the block group
checksum is the lower 16 bits of the checksum of the FS UUID, the group
number, and the group descriptor structure. Both block and inode bitmap
checksums are calculated against the FS UUID, the group number, and the
@ -51,59 +51,59 @@ The block group descriptor is laid out in ``struct ext4_group_desc``.
- Name
- Description
* - 0x0
- \_\_le32
- bg\_block\_bitmap\_lo
- __le32
- bg_block_bitmap_lo
- Lower 32-bits of location of block bitmap.
* - 0x4
- \_\_le32
- bg\_inode\_bitmap\_lo
- __le32
- bg_inode_bitmap_lo
- Lower 32-bits of location of inode bitmap.
* - 0x8
- \_\_le32
- bg\_inode\_table\_lo
- __le32
- bg_inode_table_lo
- Lower 32-bits of location of inode table.
* - 0xC
- \_\_le16
- bg\_free\_blocks\_count\_lo
- __le16
- bg_free_blocks_count_lo
- Lower 16-bits of free block count.
* - 0xE
- \_\_le16
- bg\_free\_inodes\_count\_lo
- __le16
- bg_free_inodes_count_lo
- Lower 16-bits of free inode count.
* - 0x10
- \_\_le16
- bg\_used\_dirs\_count\_lo
- __le16
- bg_used_dirs_count_lo
- Lower 16-bits of directory count.
* - 0x12
- \_\_le16
- bg\_flags
- __le16
- bg_flags
- Block group flags. See the bgflags_ table below.
* - 0x14
- \_\_le32
- bg\_exclude\_bitmap\_lo
- __le32
- bg_exclude_bitmap_lo
- Lower 32-bits of location of snapshot exclusion bitmap.
* - 0x18
- \_\_le16
- bg\_block\_bitmap\_csum\_lo
- __le16
- bg_block_bitmap_csum_lo
- Lower 16-bits of the block bitmap checksum.
* - 0x1A
- \_\_le16
- bg\_inode\_bitmap\_csum\_lo
- __le16
- bg_inode_bitmap_csum_lo
- Lower 16-bits of the inode bitmap checksum.
* - 0x1C
- \_\_le16
- bg\_itable\_unused\_lo
- __le16
- bg_itable_unused_lo
- Lower 16-bits of unused inode count. If set, we needn't scan past the
``(sb.s_inodes_per_group - gdt.bg_itable_unused)``\ th entry in the
``(sb.s_inodes_per_group - gdt.bg_itable_unused)`` th entry in the
inode table for this group.
* - 0x1E
- \_\_le16
- bg\_checksum
- Group descriptor checksum; crc16(sb\_uuid+group\_num+bg\_desc) if the
RO\_COMPAT\_GDT\_CSUM feature is set, or
crc32c(sb\_uuid+group\_num+bg\_desc) & 0xFFFF if the
RO\_COMPAT\_METADATA\_CSUM feature is set. The bg\_checksum
field in bg\_desc is skipped when calculating crc16 checksum,
- __le16
- bg_checksum
- Group descriptor checksum; crc16(sb_uuid+group_num+bg_desc) if the
RO_COMPAT_GDT_CSUM feature is set, or
crc32c(sb_uuid+group_num+bg_desc) & 0xFFFF if the
RO_COMPAT_METADATA_CSUM feature is set. The bg_checksum
field in bg_desc is skipped when calculating crc16 checksum,
and set to zero if crc32c checksum is used.
* -
-
@ -111,48 +111,48 @@ The block group descriptor is laid out in ``struct ext4_group_desc``.
- These fields only exist if the 64bit feature is enabled and s_desc_size
> 32.
* - 0x20
- \_\_le32
- bg\_block\_bitmap\_hi
- __le32
- bg_block_bitmap_hi
- Upper 32-bits of location of block bitmap.
* - 0x24
- \_\_le32
- bg\_inode\_bitmap\_hi
- __le32
- bg_inode_bitmap_hi
- Upper 32-bits of location of inodes bitmap.
* - 0x28
- \_\_le32
- bg\_inode\_table\_hi
- __le32
- bg_inode_table_hi
- Upper 32-bits of location of inodes table.
* - 0x2C
- \_\_le16
- bg\_free\_blocks\_count\_hi
- __le16
- bg_free_blocks_count_hi
- Upper 16-bits of free block count.
* - 0x2E
- \_\_le16
- bg\_free\_inodes\_count\_hi
- __le16
- bg_free_inodes_count_hi
- Upper 16-bits of free inode count.
* - 0x30
- \_\_le16
- bg\_used\_dirs\_count\_hi
- __le16
- bg_used_dirs_count_hi
- Upper 16-bits of directory count.
* - 0x32
- \_\_le16
- bg\_itable\_unused\_hi
- __le16
- bg_itable_unused_hi
- Upper 16-bits of unused inode count.
* - 0x34
- \_\_le32
- bg\_exclude\_bitmap\_hi
- __le32
- bg_exclude_bitmap_hi
- Upper 32-bits of location of snapshot exclusion bitmap.
* - 0x38
- \_\_le16
- bg\_block\_bitmap\_csum\_hi
- __le16
- bg_block_bitmap_csum_hi
- Upper 16-bits of the block bitmap checksum.
* - 0x3A
- \_\_le16
- bg\_inode\_bitmap\_csum\_hi
- __le16
- bg_inode_bitmap_csum_hi
- Upper 16-bits of the inode bitmap checksum.
* - 0x3C
- \_\_u32
- bg\_reserved
- __u32
- bg_reserved
- Padding to 64 bytes.
.. _bgflags:
@ -166,8 +166,8 @@ Block group flags can be any combination of the following:
* - Value
- Description
* - 0x1
- inode table and bitmap are not initialized (EXT4\_BG\_INODE\_UNINIT).
- inode table and bitmap are not initialized (EXT4_BG_INODE_UNINIT).
* - 0x2
- block bitmap is not initialized (EXT4\_BG\_BLOCK\_UNINIT).
- block bitmap is not initialized (EXT4_BG_BLOCK_UNINIT).
* - 0x4
- inode table is zeroed (EXT4\_BG\_INODE\_ZEROED).
- inode table is zeroed (EXT4_BG_INODE_ZEROED).

View File

@ -1,6 +1,6 @@
.. SPDX-License-Identifier: GPL-2.0
The Contents of inode.i\_block
The Contents of inode.i_block
------------------------------
Depending on the type of file an inode describes, the 60 bytes of
@ -47,7 +47,7 @@ In ext4, the file to logical block map has been replaced with an extent
tree. Under the old scheme, allocating a contiguous run of 1,000 blocks
requires an indirect block to map all 1,000 entries; with extents, the
mapping is reduced to a single ``struct ext4_extent`` with
``ee_len = 1000``. If flex\_bg is enabled, it is possible to allocate
``ee_len = 1000``. If flex_bg is enabled, it is possible to allocate
very large files with a single extent, at a considerable reduction in
metadata block use, and some improvement in disk efficiency. The inode
must have the extents flag (0x80000) flag set for this feature to be in
@ -76,28 +76,28 @@ which is 12 bytes long:
- Name
- Description
* - 0x0
- \_\_le16
- eh\_magic
- __le16
- eh_magic
- Magic number, 0xF30A.
* - 0x2
- \_\_le16
- eh\_entries
- __le16
- eh_entries
- Number of valid entries following the header.
* - 0x4
- \_\_le16
- eh\_max
- __le16
- eh_max
- Maximum number of entries that could follow the header.
* - 0x6
- \_\_le16
- eh\_depth
- __le16
- eh_depth
- Depth of this extent node in the extent tree. 0 = this extent node
points to data blocks; otherwise, this extent node points to other
extent nodes. The extent tree can be at most 5 levels deep: a logical
block number can be at most ``2^32``, and the smallest ``n`` that
satisfies ``4*(((blocksize - 12)/12)^n) >= 2^32`` is 5.
* - 0x8
- \_\_le32
- eh\_generation
- __le32
- eh_generation
- Generation of the tree. (Used by Lustre, but not standard ext4).
Internal nodes of the extent tree, also known as index nodes, are
@ -112,22 +112,22 @@ recorded as ``struct ext4_extent_idx``, and are 12 bytes long:
- Name
- Description
* - 0x0
- \_\_le32
- ei\_block
- __le32
- ei_block
- This index node covers file blocks from 'block' onward.
* - 0x4
- \_\_le32
- ei\_leaf\_lo
- __le32
- ei_leaf_lo
- Lower 32-bits of the block number of the extent node that is the next
level lower in the tree. The tree node pointed to can be either another
internal node or a leaf node, described below.
* - 0x8
- \_\_le16
- ei\_leaf\_hi
- __le16
- ei_leaf_hi
- Upper 16-bits of the previous field.
* - 0xA
- \_\_u16
- ei\_unused
- __u16
- ei_unused
-
Leaf nodes of the extent tree are recorded as ``struct ext4_extent``,
@ -142,24 +142,24 @@ and are also 12 bytes long:
- Name
- Description
* - 0x0
- \_\_le32
- ee\_block
- __le32
- ee_block
- First file block number that this extent covers.
* - 0x4
- \_\_le16
- ee\_len
- __le16
- ee_len
- Number of blocks covered by extent. If the value of this field is <=
32768, the extent is initialized. If the value of the field is > 32768,
the extent is uninitialized and the actual extent length is ``ee_len`` -
32768. Therefore, the maximum length of a initialized extent is 32768
blocks, and the maximum length of an uninitialized extent is 32767.
* - 0x6
- \_\_le16
- ee\_start\_hi
- __le16
- ee_start_hi
- Upper 16-bits of the block number to which this extent points.
* - 0x8
- \_\_le32
- ee\_start\_lo
- __le32
- ee_start_lo
- Lower 32-bits of the block number to which this extent points.
Prior to the introduction of metadata checksums, the extent header +
@ -182,8 +182,8 @@ including) the checksum itself.
- Name
- Description
* - 0x0
- \_\_le32
- eb\_checksum
- __le32
- eb_checksum
- Checksum of the extent block, crc32c(uuid+inum+igeneration+extentblock)
Inline Data

View File

@ -11,12 +11,12 @@ file is smaller than 60 bytes, then the data are stored inline in
attribute space, then it might be found as an extended attribute
“system.data” within the inode body (“ibody EA”). This of course
constrains the amount of extended attributes one can attach to an inode.
If the data size increases beyond i\_block + ibody EA, a regular block
If the data size increases beyond i_block + ibody EA, a regular block
is allocated and the contents moved to that block.
Pending a change to compact the extended attribute key used to store
inline data, one ought to be able to store 160 bytes of data in a
256-byte inode (as of June 2015, when i\_extra\_isize is 28). Prior to
256-byte inode (as of June 2015, when i_extra_isize is 28). Prior to
that, the limit was 156 bytes due to inefficient use of inode space.
The inline data feature requires the presence of an extended attribute
@ -25,12 +25,12 @@ for “system.data”, even if the attribute value is zero length.
Inline Directories
~~~~~~~~~~~~~~~~~~
The first four bytes of i\_block are the inode number of the parent
The first four bytes of i_block are the inode number of the parent
directory. Following that is a 56-byte space for an array of directory
entries; see ``struct ext4_dir_entry``. If there is a “system.data”
attribute in the inode body, the EA value is an array of
``struct ext4_dir_entry`` as well. Note that for inline directories, the
i\_block and EA space are treated as separate dirent blocks; directory
i_block and EA space are treated as separate dirent blocks; directory
entries cannot span the two.
Inline directory entries are not checksummed, as the inode checksum

View File

@ -38,138 +38,138 @@ The inode table entry is laid out in ``struct ext4_inode``.
- Name
- Description
* - 0x0
- \_\_le16
- i\_mode
- __le16
- i_mode
- File mode. See the table i_mode_ below.
* - 0x2
- \_\_le16
- i\_uid
- __le16
- i_uid
- Lower 16-bits of Owner UID.
* - 0x4
- \_\_le32
- i\_size\_lo
- __le32
- i_size_lo
- Lower 32-bits of size in bytes.
* - 0x8
- \_\_le32
- i\_atime
- Last access time, in seconds since the epoch. However, if the EA\_INODE
- __le32
- i_atime
- Last access time, in seconds since the epoch. However, if the EA_INODE
inode flag is set, this inode stores an extended attribute value and
this field contains the checksum of the value.
* - 0xC
- \_\_le32
- i\_ctime
- __le32
- i_ctime
- Last inode change time, in seconds since the epoch. However, if the
EA\_INODE inode flag is set, this inode stores an extended attribute
EA_INODE inode flag is set, this inode stores an extended attribute
value and this field contains the lower 32 bits of the attribute value's
reference count.
* - 0x10
- \_\_le32
- i\_mtime
- __le32
- i_mtime
- Last data modification time, in seconds since the epoch. However, if the
EA\_INODE inode flag is set, this inode stores an extended attribute
EA_INODE inode flag is set, this inode stores an extended attribute
value and this field contains the number of the inode that owns the
extended attribute.
* - 0x14
- \_\_le32
- i\_dtime
- __le32
- i_dtime
- Deletion Time, in seconds since the epoch.
* - 0x18
- \_\_le16
- i\_gid
- __le16
- i_gid
- Lower 16-bits of GID.
* - 0x1A
- \_\_le16
- i\_links\_count
- __le16
- i_links_count
- Hard link count. Normally, ext4 does not permit an inode to have more
than 65,000 hard links. This applies to files as well as directories,
which means that there cannot be more than 64,998 subdirectories in a
directory (each subdirectory's '..' entry counts as a hard link, as does
the '.' entry in the directory itself). With the DIR\_NLINK feature
the '.' entry in the directory itself). With the DIR_NLINK feature
enabled, ext4 supports more than 64,998 subdirectories by setting this
field to 1 to indicate that the number of hard links is not known.
* - 0x1C
- \_\_le32
- i\_blocks\_lo
- Lower 32-bits of “block” count. If the huge\_file feature flag is not
- __le32
- i_blocks_lo
- Lower 32-bits of “block” count. If the huge_file feature flag is not
set on the filesystem, the file consumes ``i_blocks_lo`` 512-byte blocks
on disk. If huge\_file is set and EXT4\_HUGE\_FILE\_FL is NOT set in
on disk. If huge_file is set and EXT4_HUGE_FILE_FL is NOT set in
``inode.i_flags``, then the file consumes ``i_blocks_lo + (i_blocks_hi
<< 32)`` 512-byte blocks on disk. If huge\_file is set and
EXT4\_HUGE\_FILE\_FL IS set in ``inode.i_flags``, then this file
<< 32)`` 512-byte blocks on disk. If huge_file is set and
EXT4_HUGE_FILE_FL IS set in ``inode.i_flags``, then this file
consumes (``i_blocks_lo + i_blocks_hi`` << 32) filesystem blocks on
disk.
* - 0x20
- \_\_le32
- i\_flags
- __le32
- i_flags
- Inode flags. See the table i_flags_ below.
* - 0x24
- 4 bytes
- i\_osd1
- i_osd1
- See the table i_osd1_ for more details.
* - 0x28
- 60 bytes
- i\_block[EXT4\_N\_BLOCKS=15]
- Block map or extent tree. See the section “The Contents of inode.i\_block”.
- i_block[EXT4_N_BLOCKS=15]
- Block map or extent tree. See the section “The Contents of inode.i_block”.
* - 0x64
- \_\_le32
- i\_generation
- __le32
- i_generation
- File version (for NFS).
* - 0x68
- \_\_le32
- i\_file\_acl\_lo
- __le32
- i_file_acl_lo
- Lower 32-bits of extended attribute block. ACLs are of course one of
many possible extended attributes; I think the name of this field is a
result of the first use of extended attributes being for ACLs.
* - 0x6C
- \_\_le32
- i\_size\_high / i\_dir\_acl
- __le32
- i_size_high / i_dir_acl
- Upper 32-bits of file/directory size. In ext2/3 this field was named
i\_dir\_acl, though it was usually set to zero and never used.
i_dir_acl, though it was usually set to zero and never used.
* - 0x70
- \_\_le32
- i\_obso\_faddr
- __le32
- i_obso_faddr
- (Obsolete) fragment address.
* - 0x74
- 12 bytes
- i\_osd2
- i_osd2
- See the table i_osd2_ for more details.
* - 0x80
- \_\_le16
- i\_extra\_isize
- __le16
- i_extra_isize
- Size of this inode - 128. Alternately, the size of the extended inode
fields beyond the original ext2 inode, including this field.
* - 0x82
- \_\_le16
- i\_checksum\_hi
- __le16
- i_checksum_hi
- Upper 16-bits of the inode checksum.
* - 0x84
- \_\_le32
- i\_ctime\_extra
- __le32
- i_ctime_extra
- Extra change time bits. This provides sub-second precision. See Inode
Timestamps section.
* - 0x88
- \_\_le32
- i\_mtime\_extra
- __le32
- i_mtime_extra
- Extra modification time bits. This provides sub-second precision.
* - 0x8C
- \_\_le32
- i\_atime\_extra
- __le32
- i_atime_extra
- Extra access time bits. This provides sub-second precision.
* - 0x90
- \_\_le32
- i\_crtime
- __le32
- i_crtime
- File creation time, in seconds since the epoch.
* - 0x94
- \_\_le32
- i\_crtime\_extra
- __le32
- i_crtime_extra
- Extra file creation time bits. This provides sub-second precision.
* - 0x98
- \_\_le32
- i\_version\_hi
- __le32
- i_version_hi
- Upper 32-bits for version number.
* - 0x9C
- \_\_le32
- i\_projid
- __le32
- i_projid
- Project ID.
.. _i_mode:
@ -183,45 +183,45 @@ The ``i_mode`` value is a combination of the following flags:
* - Value
- Description
* - 0x1
- S\_IXOTH (Others may execute)
- S_IXOTH (Others may execute)
* - 0x2
- S\_IWOTH (Others may write)
- S_IWOTH (Others may write)
* - 0x4
- S\_IROTH (Others may read)
- S_IROTH (Others may read)
* - 0x8
- S\_IXGRP (Group members may execute)
- S_IXGRP (Group members may execute)
* - 0x10
- S\_IWGRP (Group members may write)
- S_IWGRP (Group members may write)
* - 0x20
- S\_IRGRP (Group members may read)
- S_IRGRP (Group members may read)
* - 0x40
- S\_IXUSR (Owner may execute)
- S_IXUSR (Owner may execute)
* - 0x80
- S\_IWUSR (Owner may write)
- S_IWUSR (Owner may write)
* - 0x100
- S\_IRUSR (Owner may read)
- S_IRUSR (Owner may read)
* - 0x200
- S\_ISVTX (Sticky bit)
- S_ISVTX (Sticky bit)
* - 0x400
- S\_ISGID (Set GID)
- S_ISGID (Set GID)
* - 0x800
- S\_ISUID (Set UID)
- S_ISUID (Set UID)
* -
- These are mutually-exclusive file types:
* - 0x1000
- S\_IFIFO (FIFO)
- S_IFIFO (FIFO)
* - 0x2000
- S\_IFCHR (Character device)
- S_IFCHR (Character device)
* - 0x4000
- S\_IFDIR (Directory)
- S_IFDIR (Directory)
* - 0x6000
- S\_IFBLK (Block device)
- S_IFBLK (Block device)
* - 0x8000
- S\_IFREG (Regular file)
- S_IFREG (Regular file)
* - 0xA000
- S\_IFLNK (Symbolic link)
- S_IFLNK (Symbolic link)
* - 0xC000
- S\_IFSOCK (Socket)
- S_IFSOCK (Socket)
.. _i_flags:
@ -234,56 +234,56 @@ The ``i_flags`` field is a combination of these values:
* - Value
- Description
* - 0x1
- This file requires secure deletion (EXT4\_SECRM\_FL). (not implemented)
- This file requires secure deletion (EXT4_SECRM_FL). (not implemented)
* - 0x2
- This file should be preserved, should undeletion be desired
(EXT4\_UNRM\_FL). (not implemented)
(EXT4_UNRM_FL). (not implemented)
* - 0x4
- File is compressed (EXT4\_COMPR\_FL). (not really implemented)
- File is compressed (EXT4_COMPR_FL). (not really implemented)
* - 0x8
- All writes to the file must be synchronous (EXT4\_SYNC\_FL).
- All writes to the file must be synchronous (EXT4_SYNC_FL).
* - 0x10
- File is immutable (EXT4\_IMMUTABLE\_FL).
- File is immutable (EXT4_IMMUTABLE_FL).
* - 0x20
- File can only be appended (EXT4\_APPEND\_FL).
- File can only be appended (EXT4_APPEND_FL).
* - 0x40
- The dump(1) utility should not dump this file (EXT4\_NODUMP\_FL).
- The dump(1) utility should not dump this file (EXT4_NODUMP_FL).
* - 0x80
- Do not update access time (EXT4\_NOATIME\_FL).
- Do not update access time (EXT4_NOATIME_FL).
* - 0x100
- Dirty compressed file (EXT4\_DIRTY\_FL). (not used)
- Dirty compressed file (EXT4_DIRTY_FL). (not used)
* - 0x200
- File has one or more compressed clusters (EXT4\_COMPRBLK\_FL). (not used)
- File has one or more compressed clusters (EXT4_COMPRBLK_FL). (not used)
* - 0x400
- Do not compress file (EXT4\_NOCOMPR\_FL). (not used)
- Do not compress file (EXT4_NOCOMPR_FL). (not used)
* - 0x800
- Encrypted inode (EXT4\_ENCRYPT\_FL). This bit value previously was
EXT4\_ECOMPR\_FL (compression error), which was never used.
- Encrypted inode (EXT4_ENCRYPT_FL). This bit value previously was
EXT4_ECOMPR_FL (compression error), which was never used.
* - 0x1000
- Directory has hashed indexes (EXT4\_INDEX\_FL).
- Directory has hashed indexes (EXT4_INDEX_FL).
* - 0x2000
- AFS magic directory (EXT4\_IMAGIC\_FL).
- AFS magic directory (EXT4_IMAGIC_FL).
* - 0x4000
- File data must always be written through the journal
(EXT4\_JOURNAL\_DATA\_FL).
(EXT4_JOURNAL_DATA_FL).
* - 0x8000
- File tail should not be merged (EXT4\_NOTAIL\_FL). (not used by ext4)
- File tail should not be merged (EXT4_NOTAIL_FL). (not used by ext4)
* - 0x10000
- All directory entry data should be written synchronously (see
``dirsync``) (EXT4\_DIRSYNC\_FL).
``dirsync``) (EXT4_DIRSYNC_FL).
* - 0x20000
- Top of directory hierarchy (EXT4\_TOPDIR\_FL).
- Top of directory hierarchy (EXT4_TOPDIR_FL).
* - 0x40000
- This is a huge file (EXT4\_HUGE\_FILE\_FL).
- This is a huge file (EXT4_HUGE_FILE_FL).
* - 0x80000
- Inode uses extents (EXT4\_EXTENTS\_FL).
- Inode uses extents (EXT4_EXTENTS_FL).
* - 0x100000
- Verity protected file (EXT4\_VERITY\_FL).
- Verity protected file (EXT4_VERITY_FL).
* - 0x200000
- Inode stores a large extended attribute value in its data blocks
(EXT4\_EA\_INODE\_FL).
(EXT4_EA_INODE_FL).
* - 0x400000
- This file has blocks allocated past EOF (EXT4\_EOFBLOCKS\_FL).
- This file has blocks allocated past EOF (EXT4_EOFBLOCKS_FL).
(deprecated)
* - 0x01000000
- Inode is a snapshot (``EXT4_SNAPFILE_FL``). (not in mainline)
@ -294,21 +294,21 @@ The ``i_flags`` field is a combination of these values:
- Snapshot shrink has completed (``EXT4_SNAPFILE_SHRUNK_FL``). (not in
mainline)
* - 0x10000000
- Inode has inline data (EXT4\_INLINE\_DATA\_FL).
- Inode has inline data (EXT4_INLINE_DATA_FL).
* - 0x20000000
- Create children with the same project ID (EXT4\_PROJINHERIT\_FL).
- Create children with the same project ID (EXT4_PROJINHERIT_FL).
* - 0x80000000
- Reserved for ext4 library (EXT4\_RESERVED\_FL).
- Reserved for ext4 library (EXT4_RESERVED_FL).
* -
- Aggregate flags:
* - 0x705BDFFF
- User-visible flags.
* - 0x604BC0FF
- User-modifiable flags. Note that while EXT4\_JOURNAL\_DATA\_FL and
EXT4\_EXTENTS\_FL can be set with setattr, they are not in the kernel's
EXT4\_FL\_USER\_MODIFIABLE mask, since it needs to handle the setting of
- User-modifiable flags. Note that while EXT4_JOURNAL_DATA_FL and
EXT4_EXTENTS_FL can be set with setattr, they are not in the kernel's
EXT4_FL_USER_MODIFIABLE mask, since it needs to handle the setting of
these flags in a special manner and they are masked out of the set of
flags that are saved directly to i\_flags.
flags that are saved directly to i_flags.
.. _i_osd1:
@ -325,9 +325,9 @@ Linux:
- Name
- Description
* - 0x0
- \_\_le32
- l\_i\_version
- Inode version. However, if the EA\_INODE inode flag is set, this inode
- __le32
- l_i_version
- Inode version. However, if the EA_INODE inode flag is set, this inode
stores an extended attribute value and this field contains the upper 32
bits of the attribute value's reference count.
@ -342,8 +342,8 @@ Hurd:
- Name
- Description
* - 0x0
- \_\_le32
- h\_i\_translator
- __le32
- h_i_translator
- ??
Masix:
@ -357,8 +357,8 @@ Masix:
- Name
- Description
* - 0x0
- \_\_le32
- m\_i\_reserved
- __le32
- m_i_reserved
- ??
.. _i_osd2:
@ -376,30 +376,30 @@ Linux:
- Name
- Description
* - 0x0
- \_\_le16
- l\_i\_blocks\_high
- __le16
- l_i_blocks_high
- Upper 16-bits of the block count. Please see the note attached to
i\_blocks\_lo.
i_blocks_lo.
* - 0x2
- \_\_le16
- l\_i\_file\_acl\_high
- __le16
- l_i_file_acl_high
- Upper 16-bits of the extended attribute block (historically, the file
ACL location). See the Extended Attributes section below.
* - 0x4
- \_\_le16
- l\_i\_uid\_high
- __le16
- l_i_uid_high
- Upper 16-bits of the Owner UID.
* - 0x6
- \_\_le16
- l\_i\_gid\_high
- __le16
- l_i_gid_high
- Upper 16-bits of the GID.
* - 0x8
- \_\_le16
- l\_i\_checksum\_lo
- __le16
- l_i_checksum_lo
- Lower 16-bits of the inode checksum.
* - 0xA
- \_\_le16
- l\_i\_reserved
- __le16
- l_i_reserved
- Unused.
Hurd:
@ -413,24 +413,24 @@ Hurd:
- Name
- Description
* - 0x0
- \_\_le16
- h\_i\_reserved1
- __le16
- h_i_reserved1
- ??
* - 0x2
- \_\_u16
- h\_i\_mode\_high
- __u16
- h_i_mode_high
- Upper 16-bits of the file mode.
* - 0x4
- \_\_le16
- h\_i\_uid\_high
- __le16
- h_i_uid_high
- Upper 16-bits of the Owner UID.
* - 0x6
- \_\_le16
- h\_i\_gid\_high
- __le16
- h_i_gid_high
- Upper 16-bits of the GID.
* - 0x8
- \_\_u32
- h\_i\_author
- __u32
- h_i_author
- Author code?
Masix:
@ -444,17 +444,17 @@ Masix:
- Name
- Description
* - 0x0
- \_\_le16
- h\_i\_reserved1
- __le16
- h_i_reserved1
- ??
* - 0x2
- \_\_u16
- m\_i\_file\_acl\_high
- __u16
- m_i_file_acl_high
- Upper 16-bits of the extended attribute block (historically, the file
ACL location).
* - 0x4
- \_\_u32
- m\_i\_reserved2[2]
- __u32
- m_i_reserved2[2]
- ??
Inode Size
@ -466,11 +466,11 @@ In ext2 and ext3, the inode structure size was fixed at 128 bytes
on-disk inode at format time for all inodes in the filesystem to provide
space beyond the end of the original ext2 inode. The on-disk inode
record size is recorded in the superblock as ``s_inode_size``. The
number of bytes actually used by struct ext4\_inode beyond the original
number of bytes actually used by struct ext4_inode beyond the original
128-byte ext2 inode is recorded in the ``i_extra_isize`` field for each
inode, which allows struct ext4\_inode to grow for a new kernel without
inode, which allows struct ext4_inode to grow for a new kernel without
having to upgrade all of the on-disk inodes. Access to fields beyond
EXT2\_GOOD\_OLD\_INODE\_SIZE should be verified to be within
EXT2_GOOD_OLD_INODE_SIZE should be verified to be within
``i_extra_isize``. By default, ext4 inode records are 256 bytes, and (as
of August 2019) the inode structure is 160 bytes
(``i_extra_isize = 32``). The extra space between the end of the inode
@ -516,7 +516,7 @@ creation time (crtime); this field is 64-bits wide and decoded in the
same manner as 64-bit [cma]time. Neither crtime nor dtime are accessible
through the regular stat() interface, though debugfs will report them.
We use the 32-bit signed time value plus (2^32 \* (extra epoch bits)).
We use the 32-bit signed time value plus (2^32 * (extra epoch bits)).
In other words:
.. list-table::
@ -525,8 +525,8 @@ In other words:
* - Extra epoch bits
- MSB of 32-bit time
- Adjustment for signed 32-bit to 64-bit tv\_sec
- Decoded 64-bit tv\_sec
- Adjustment for signed 32-bit to 64-bit tv_sec
- Decoded 64-bit tv_sec
- valid time range
* - 0 0
- 1

View File

@ -63,8 +63,8 @@ Generally speaking, the journal has this format:
:header-rows: 1
* - Superblock
- descriptor\_block (data\_blocks or revocation\_block) [more data or
revocations] commmit\_block
- descriptor_block (data_blocks or revocation_block) [more data or
revocations] commmit_block
- [more transactions...]
* -
- One transaction
@ -93,8 +93,8 @@ superblock.
* - 1024 bytes of padding
- ext4 Superblock
- Journal Superblock
- descriptor\_block (data\_blocks or revocation\_block) [more data or
revocations] commmit\_block
- descriptor_block (data_blocks or revocation_block) [more data or
revocations] commmit_block
- [more transactions...]
* -
-
@ -117,17 +117,17 @@ Every block in the journal starts with a common 12-byte header
- Name
- Description
* - 0x0
- \_\_be32
- h\_magic
- __be32
- h_magic
- jbd2 magic number, 0xC03B3998.
* - 0x4
- \_\_be32
- h\_blocktype
- __be32
- h_blocktype
- Description of what this block contains. See the jbd2_blocktype_ table
below.
* - 0x8
- \_\_be32
- h\_sequence
- __be32
- h_sequence
- The transaction ID that goes with this block.
.. _jbd2_blocktype:
@ -177,99 +177,99 @@ which is 1024 bytes long:
-
- Static information describing the journal.
* - 0x0
- journal\_header\_t (12 bytes)
- s\_header
- journal_header_t (12 bytes)
- s_header
- Common header identifying this as a superblock.
* - 0xC
- \_\_be32
- s\_blocksize
- __be32
- s_blocksize
- Journal device block size.
* - 0x10
- \_\_be32
- s\_maxlen
- __be32
- s_maxlen
- Total number of blocks in this journal.
* - 0x14
- \_\_be32
- s\_first
- __be32
- s_first
- First block of log information.
* -
-
-
- Dynamic information describing the current state of the log.
* - 0x18
- \_\_be32
- s\_sequence
- __be32
- s_sequence
- First commit ID expected in log.
* - 0x1C
- \_\_be32
- s\_start
- __be32
- s_start
- Block number of the start of log. Contrary to the comments, this field
being zero does not imply that the journal is clean!
* - 0x20
- \_\_be32
- s\_errno
- Error value, as set by jbd2\_journal\_abort().
- __be32
- s_errno
- Error value, as set by jbd2_journal_abort().
* -
-
-
- The remaining fields are only valid in a v2 superblock.
* - 0x24
- \_\_be32
- s\_feature\_compat;
- __be32
- s_feature_compat;
- Compatible feature set. See the table jbd2_compat_ below.
* - 0x28
- \_\_be32
- s\_feature\_incompat
- __be32
- s_feature_incompat
- Incompatible feature set. See the table jbd2_incompat_ below.
* - 0x2C
- \_\_be32
- s\_feature\_ro\_compat
- __be32
- s_feature_ro_compat
- Read-only compatible feature set. There aren't any of these currently.
* - 0x30
- \_\_u8
- s\_uuid[16]
- __u8
- s_uuid[16]
- 128-bit uuid for journal. This is compared against the copy in the ext4
super block at mount time.
* - 0x40
- \_\_be32
- s\_nr\_users
- __be32
- s_nr_users
- Number of file systems sharing this journal.
* - 0x44
- \_\_be32
- s\_dynsuper
- __be32
- s_dynsuper
- Location of dynamic super block copy. (Not used?)
* - 0x48
- \_\_be32
- s\_max\_transaction
- __be32
- s_max_transaction
- Limit of journal blocks per transaction. (Not used?)
* - 0x4C
- \_\_be32
- s\_max\_trans\_data
- __be32
- s_max_trans_data
- Limit of data blocks per transaction. (Not used?)
* - 0x50
- \_\_u8
- s\_checksum\_type
- __u8
- s_checksum_type
- Checksum algorithm used for the journal. See jbd2_checksum_type_ for
more info.
* - 0x51
- \_\_u8[3]
- s\_padding2
- __u8[3]
- s_padding2
-
* - 0x54
- \_\_be32
- s\_num\_fc\_blocks
- __be32
- s_num_fc_blocks
- Number of fast commit blocks in the journal.
* - 0x58
- \_\_u32
- s\_padding[42]
- __u32
- s_padding[42]
-
* - 0xFC
- \_\_be32
- s\_checksum
- __be32
- s_checksum
- Checksum of the entire superblock, with this field set to zero.
* - 0x100
- \_\_u8
- s\_users[16\*48]
- __u8
- s_users[16*48]
- ids of all file systems sharing the log. e2fsprogs/Linux don't allow
shared external journals, but I imagine Lustre (or ocfs2?), which use
the jbd2 code, might.
@ -286,7 +286,7 @@ The journal compat features are any combination of the following:
- Description
* - 0x1
- Journal maintains checksums on the data blocks.
(JBD2\_FEATURE\_COMPAT\_CHECKSUM)
(JBD2_FEATURE_COMPAT_CHECKSUM)
.. _jbd2_incompat:
@ -299,23 +299,23 @@ The journal incompat features are any combination of the following:
* - Value
- Description
* - 0x1
- Journal has block revocation records. (JBD2\_FEATURE\_INCOMPAT\_REVOKE)
- Journal has block revocation records. (JBD2_FEATURE_INCOMPAT_REVOKE)
* - 0x2
- Journal can deal with 64-bit block numbers.
(JBD2\_FEATURE\_INCOMPAT\_64BIT)
(JBD2_FEATURE_INCOMPAT_64BIT)
* - 0x4
- Journal commits asynchronously. (JBD2\_FEATURE\_INCOMPAT\_ASYNC\_COMMIT)
- Journal commits asynchronously. (JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)
* - 0x8
- This journal uses v2 of the checksum on-disk format. Each journal
metadata block gets its own checksum, and the block tags in the
descriptor table contain checksums for each of the data blocks in the
journal. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2)
journal. (JBD2_FEATURE_INCOMPAT_CSUM_V2)
* - 0x10
- This journal uses v3 of the checksum on-disk format. This is the same as
v2, but the journal block tag size is fixed regardless of the size of
block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3)
block numbers. (JBD2_FEATURE_INCOMPAT_CSUM_V3)
* - 0x20
- Journal has fast commit blocks. (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT)
- Journal has fast commit blocks. (JBD2_FEATURE_INCOMPAT_FAST_COMMIT)
.. _jbd2_checksum_type:
@ -355,11 +355,11 @@ Descriptor blocks consume at least 36 bytes, but use a full block:
- Name
- Descriptor
* - 0x0
- journal\_header\_t
- journal_header_t
- (open coded)
- Common block header.
* - 0xC
- struct journal\_block\_tag\_s
- struct journal_block_tag_s
- open coded array[]
- Enough tags either to fill up the block or to describe all the data
blocks that follow this descriptor block.
@ -367,7 +367,7 @@ Descriptor blocks consume at least 36 bytes, but use a full block:
Journal block tags have any of the following formats, depending on which
journal feature and block tag flags are set.
If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is set, the journal block tag is
If JBD2_FEATURE_INCOMPAT_CSUM_V3 is set, the journal block tag is
defined as ``struct journal_block_tag3_s``, which looks like the
following. The size is 16 or 32 bytes.
@ -380,24 +380,24 @@ following. The size is 16 or 32 bytes.
- Name
- Descriptor
* - 0x0
- \_\_be32
- t\_blocknr
- __be32
- t_blocknr
- Lower 32-bits of the location of where the corresponding data block
should end up on disk.
* - 0x4
- \_\_be32
- t\_flags
- __be32
- t_flags
- Flags that go with the descriptor. See the table jbd2_tag_flags_ for
more info.
* - 0x8
- \_\_be32
- t\_blocknr\_high
- __be32
- t_blocknr_high
- Upper 32-bits of the location of where the corresponding data block
should end up on disk. This is zero if JBD2\_FEATURE\_INCOMPAT\_64BIT is
should end up on disk. This is zero if JBD2_FEATURE_INCOMPAT_64BIT is
not enabled.
* - 0xC
- \_\_be32
- t\_checksum
- __be32
- t_checksum
- Checksum of the journal UUID, the sequence number, and the data block.
* -
-
@ -433,7 +433,7 @@ The journal tag flags are any combination of the following:
* - 0x8
- This is the last tag in this descriptor block.
If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is NOT set, the journal block tag
If JBD2_FEATURE_INCOMPAT_CSUM_V3 is NOT set, the journal block tag
is defined as ``struct journal_block_tag_s``, which looks like the
following. The size is 8, 12, 24, or 28 bytes:
@ -446,18 +446,18 @@ following. The size is 8, 12, 24, or 28 bytes:
- Name
- Descriptor
* - 0x0
- \_\_be32
- t\_blocknr
- __be32
- t_blocknr
- Lower 32-bits of the location of where the corresponding data block
should end up on disk.
* - 0x4
- \_\_be16
- t\_checksum
- __be16
- t_checksum
- Checksum of the journal UUID, the sequence number, and the data block.
Note that only the lower 16 bits are stored.
* - 0x6
- \_\_be16
- t\_flags
- __be16
- t_flags
- Flags that go with the descriptor. See the table jbd2_tag_flags_ for
more info.
* -
@ -466,8 +466,8 @@ following. The size is 8, 12, 24, or 28 bytes:
- This next field is only present if the super block indicates support for
64-bit block numbers.
* - 0x8
- \_\_be32
- t\_blocknr\_high
- __be32
- t_blocknr_high
- Upper 32-bits of the location of where the corresponding data block
should end up on disk.
* -
@ -483,8 +483,8 @@ following. The size is 8, 12, 24, or 28 bytes:
``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that
field.
If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or
JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a
If JBD2_FEATURE_INCOMPAT_CSUM_V2 or
JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the end of the block is a
``struct jbd2_journal_block_tail``, which looks like this:
.. list-table::
@ -496,8 +496,8 @@ JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a
- Name
- Descriptor
* - 0x0
- \_\_be32
- t\_checksum
- __be32
- t_checksum
- Checksum of the journal UUID + the descriptor block, with this field set
to zero.
@ -538,25 +538,25 @@ length, but use a full block:
- Name
- Description
* - 0x0
- journal\_header\_t
- r\_header
- journal_header_t
- r_header
- Common block header.
* - 0xC
- \_\_be32
- r\_count
- __be32
- r_count
- Number of bytes used in this block.
* - 0x10
- \_\_be32 or \_\_be64
- __be32 or __be64
- blocks[0]
- Blocks to revoke.
After r\_count is a linear array of block numbers that are effectively
After r_count is a linear array of block numbers that are effectively
revoked by this transaction. The size of each block number is 8 bytes if
the superblock advertises 64-bit block number support, or 4 bytes
otherwise.
If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or
JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the revocation
If JBD2_FEATURE_INCOMPAT_CSUM_V2 or
JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the end of the revocation
block is a ``struct jbd2_journal_revoke_tail``, which has this format:
.. list-table::
@ -568,8 +568,8 @@ block is a ``struct jbd2_journal_revoke_tail``, which has this format:
- Name
- Description
* - 0x0
- \_\_be32
- r\_checksum
- __be32
- r_checksum
- Checksum of the journal UUID + revocation block
Commit Block
@ -592,38 +592,38 @@ bytes long (but uses a full block):
- Name
- Descriptor
* - 0x0
- journal\_header\_s
- journal_header_s
- (open coded)
- Common block header.
* - 0xC
- unsigned char
- h\_chksum\_type
- h_chksum_type
- The type of checksum to use to verify the integrity of the data blocks
in the transaction. See jbd2_checksum_type_ for more info.
* - 0xD
- unsigned char
- h\_chksum\_size
- h_chksum_size
- The number of bytes used by the checksum. Most likely 4.
* - 0xE
- unsigned char
- h\_padding[2]
- h_padding[2]
-
* - 0x10
- \_\_be32
- h\_chksum[JBD2\_CHECKSUM\_BYTES]
- __be32
- h_chksum[JBD2_CHECKSUM_BYTES]
- 32 bytes of space to store checksums. If
JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3
JBD2_FEATURE_INCOMPAT_CSUM_V2 or JBD2_FEATURE_INCOMPAT_CSUM_V3
are set, the first ``__be32`` is the checksum of the journal UUID and
the entire commit block, with this field zeroed. If
JBD2\_FEATURE\_COMPAT\_CHECKSUM is set, the first ``__be32`` is the
JBD2_FEATURE_COMPAT_CHECKSUM is set, the first ``__be32`` is the
crc32 of all the blocks already written to the transaction.
* - 0x30
- \_\_be64
- h\_commit\_sec
- __be64
- h_commit_sec
- The time that the transaction was committed, in seconds since the epoch.
* - 0x38
- \_\_be32
- h\_commit\_nsec
- __be32
- h_commit_nsec
- Nanoseconds component of the above timestamp.
Fast commits

View File

@ -7,8 +7,8 @@ Multiple mount protection (MMP) is a feature that protects the
filesystem against multiple hosts trying to use the filesystem
simultaneously. When a filesystem is opened (for mounting, or fsck,
etc.), the MMP code running on the node (call it node A) checks a
sequence number. If the sequence number is EXT4\_MMP\_SEQ\_CLEAN, the
open continues. If the sequence number is EXT4\_MMP\_SEQ\_FSCK, then
sequence number. If the sequence number is EXT4_MMP_SEQ_CLEAN, the
open continues. If the sequence number is EXT4_MMP_SEQ_FSCK, then
fsck is (hopefully) running, and open fails immediately. Otherwise, the
open code will wait for twice the specified MMP check interval and check
the sequence number again. If the sequence number has changed, then the
@ -40,38 +40,38 @@ The MMP structure (``struct mmp_struct``) is as follows:
- Name
- Description
* - 0x0
- \_\_le32
- mmp\_magic
- __le32
- mmp_magic
- Magic number for MMP, 0x004D4D50 (“MMP”).
* - 0x4
- \_\_le32
- mmp\_seq
- __le32
- mmp_seq
- Sequence number, updated periodically.
* - 0x8
- \_\_le64
- mmp\_time
- __le64
- mmp_time
- Time that the MMP block was last updated.
* - 0x10
- char[64]
- mmp\_nodename
- mmp_nodename
- Hostname of the node that opened the filesystem.
* - 0x50
- char[32]
- mmp\_bdevname
- mmp_bdevname
- Block device name of the filesystem.
* - 0x70
- \_\_le16
- mmp\_check\_interval
- __le16
- mmp_check_interval
- The MMP re-check interval, in seconds.
* - 0x72
- \_\_le16
- mmp\_pad1
- __le16
- mmp_pad1
- Zero.
* - 0x74
- \_\_le32[226]
- mmp\_pad2
- __le32[226]
- mmp_pad2
- Zero.
* - 0x3FC
- \_\_le32
- mmp\_checksum
- __le32
- mmp_checksum
- Checksum of the MMP block.

View File

@ -7,7 +7,7 @@ An ext4 file system is split into a series of block groups. To reduce
performance difficulties due to fragmentation, the block allocator tries
very hard to keep each file's blocks within the same group, thereby
reducing seek times. The size of a block group is specified in
``sb.s_blocks_per_group`` blocks, though it can also calculated as 8 \*
``sb.s_blocks_per_group`` blocks, though it can also calculated as 8 *
``block_size_in_bytes``. With the default block size of 4KiB, each group
will contain 32,768 blocks, for a length of 128MiB. The number of block
groups is the size of the device divided by the size of a block group.

View File

@ -34,7 +34,7 @@ ext4 reserves some inode for special features, as follows:
* - 10
- Replica inode, used for some non-upstream feature?
* - 11
- Traditional first non-reserved inode. Usually this is the lost+found directory. See s\_first\_ino in the superblock.
- Traditional first non-reserved inode. Usually this is the lost+found directory. See s_first_ino in the superblock.
Note that there are also some inodes allocated from non-reserved inode numbers
for other filesystem features which are not referenced from standard directory
@ -47,9 +47,9 @@ hierarchy. These are generally reference from the superblock. They are:
* - Superblock field
- Description
* - s\_lpf\_ino
* - s_lpf_ino
- Inode number of lost+found directory.
* - s\_prj\_quota\_inum
* - s_prj_quota_inum
- Inode number of quota file tracking project quotas
* - s\_orphan\_file\_inum
* - s_orphan_file_inum
- Inode number of file tracking orphan inodes.

View File

@ -7,7 +7,7 @@ The superblock records various information about the enclosing
filesystem, such as block counts, inode counts, supported features,
maintenance information, and more.
If the sparse\_super feature flag is set, redundant copies of the
If the sparse_super feature flag is set, redundant copies of the
superblock and group descriptors are kept only in the groups whose group
number is either 0 or a power of 3, 5, or 7. If the flag is not set,
redundant copies are kept in all groups.
@ -27,107 +27,107 @@ The ext4 superblock is laid out as follows in
- Name
- Description
* - 0x0
- \_\_le32
- s\_inodes\_count
- __le32
- s_inodes_count
- Total inode count.
* - 0x4
- \_\_le32
- s\_blocks\_count\_lo
- __le32
- s_blocks_count_lo
- Total block count.
* - 0x8
- \_\_le32
- s\_r\_blocks\_count\_lo
- __le32
- s_r_blocks_count_lo
- This number of blocks can only be allocated by the super-user.
* - 0xC
- \_\_le32
- s\_free\_blocks\_count\_lo
- __le32
- s_free_blocks_count_lo
- Free block count.
* - 0x10
- \_\_le32
- s\_free\_inodes\_count
- __le32
- s_free_inodes_count
- Free inode count.
* - 0x14
- \_\_le32
- s\_first\_data\_block
- __le32
- s_first_data_block
- First data block. This must be at least 1 for 1k-block filesystems and
is typically 0 for all other block sizes.
* - 0x18
- \_\_le32
- s\_log\_block\_size
- Block size is 2 ^ (10 + s\_log\_block\_size).
- __le32
- s_log_block_size
- Block size is 2 ^ (10 + s_log_block_size).
* - 0x1C
- \_\_le32
- s\_log\_cluster\_size
- Cluster size is 2 ^ (10 + s\_log\_cluster\_size) blocks if bigalloc is
enabled. Otherwise s\_log\_cluster\_size must equal s\_log\_block\_size.
- __le32
- s_log_cluster_size
- Cluster size is 2 ^ (10 + s_log_cluster_size) blocks if bigalloc is
enabled. Otherwise s_log_cluster_size must equal s_log_block_size.
* - 0x20
- \_\_le32
- s\_blocks\_per\_group
- __le32
- s_blocks_per_group
- Blocks per group.
* - 0x24
- \_\_le32
- s\_clusters\_per\_group
- __le32
- s_clusters_per_group
- Clusters per group, if bigalloc is enabled. Otherwise
s\_clusters\_per\_group must equal s\_blocks\_per\_group.
s_clusters_per_group must equal s_blocks_per_group.
* - 0x28
- \_\_le32
- s\_inodes\_per\_group
- __le32
- s_inodes_per_group
- Inodes per group.
* - 0x2C
- \_\_le32
- s\_mtime
- __le32
- s_mtime
- Mount time, in seconds since the epoch.
* - 0x30
- \_\_le32
- s\_wtime
- __le32
- s_wtime
- Write time, in seconds since the epoch.
* - 0x34
- \_\_le16
- s\_mnt\_count
- __le16
- s_mnt_count
- Number of mounts since the last fsck.
* - 0x36
- \_\_le16
- s\_max\_mnt\_count
- __le16
- s_max_mnt_count
- Number of mounts beyond which a fsck is needed.
* - 0x38
- \_\_le16
- s\_magic
- __le16
- s_magic
- Magic signature, 0xEF53
* - 0x3A
- \_\_le16
- s\_state
- __le16
- s_state
- File system state. See super_state_ for more info.
* - 0x3C
- \_\_le16
- s\_errors
- __le16
- s_errors
- Behaviour when detecting errors. See super_errors_ for more info.
* - 0x3E
- \_\_le16
- s\_minor\_rev\_level
- __le16
- s_minor_rev_level
- Minor revision level.
* - 0x40
- \_\_le32
- s\_lastcheck
- __le32
- s_lastcheck
- Time of last check, in seconds since the epoch.
* - 0x44
- \_\_le32
- s\_checkinterval
- __le32
- s_checkinterval
- Maximum time between checks, in seconds.
* - 0x48
- \_\_le32
- s\_creator\_os
- __le32
- s_creator_os
- Creator OS. See the table super_creator_ for more info.
* - 0x4C
- \_\_le32
- s\_rev\_level
- __le32
- s_rev_level
- Revision level. See the table super_revision_ for more info.
* - 0x50
- \_\_le16
- s\_def\_resuid
- __le16
- s_def_resuid
- Default uid for reserved blocks.
* - 0x52
- \_\_le16
- s\_def\_resgid
- __le16
- s_def_resgid
- Default gid for reserved blocks.
* -
-
@ -143,50 +143,50 @@ The ext4 superblock is laid out as follows in
about a feature in either the compatible or incompatible feature set, it
must abort and not try to meddle with things it doesn't understand...
* - 0x54
- \_\_le32
- s\_first\_ino
- __le32
- s_first_ino
- First non-reserved inode.
* - 0x58
- \_\_le16
- s\_inode\_size
- __le16
- s_inode_size
- Size of inode structure, in bytes.
* - 0x5A
- \_\_le16
- s\_block\_group\_nr
- __le16
- s_block_group_nr
- Block group # of this superblock.
* - 0x5C
- \_\_le32
- s\_feature\_compat
- __le32
- s_feature_compat
- Compatible feature set flags. Kernel can still read/write this fs even
if it doesn't understand a flag; fsck should not do that. See the
super_compat_ table for more info.
* - 0x60
- \_\_le32
- s\_feature\_incompat
- __le32
- s_feature_incompat
- Incompatible feature set. If the kernel or fsck doesn't understand one
of these bits, it should stop. See the super_incompat_ table for more
info.
* - 0x64
- \_\_le32
- s\_feature\_ro\_compat
- __le32
- s_feature_ro_compat
- Readonly-compatible feature set. If the kernel doesn't understand one of
these bits, it can still mount read-only. See the super_rocompat_ table
for more info.
* - 0x68
- \_\_u8
- s\_uuid[16]
- __u8
- s_uuid[16]
- 128-bit UUID for volume.
* - 0x78
- char
- s\_volume\_name[16]
- s_volume_name[16]
- Volume label.
* - 0x88
- char
- s\_last\_mounted[64]
- s_last_mounted[64]
- Directory where filesystem was last mounted.
* - 0xC8
- \_\_le32
- s\_algorithm\_usage\_bitmap
- __le32
- s_algorithm_usage_bitmap
- For compression (Not used in e2fsprogs/Linux)
* -
-
@ -194,18 +194,18 @@ The ext4 superblock is laid out as follows in
- Performance hints. Directory preallocation should only happen if the
EXT4_FEATURE_COMPAT_DIR_PREALLOC flag is on.
* - 0xCC
- \_\_u8
- s\_prealloc\_blocks
- __u8
- s_prealloc_blocks
- #. of blocks to try to preallocate for ... files? (Not used in
e2fsprogs/Linux)
* - 0xCD
- \_\_u8
- s\_prealloc\_dir\_blocks
- __u8
- s_prealloc_dir_blocks
- #. of blocks to preallocate for directories. (Not used in
e2fsprogs/Linux)
* - 0xCE
- \_\_le16
- s\_reserved\_gdt\_blocks
- __le16
- s_reserved_gdt_blocks
- Number of reserved GDT entries for future filesystem expansion.
* -
-
@ -213,281 +213,281 @@ The ext4 superblock is laid out as follows in
- Journalling support is valid only if EXT4_FEATURE_COMPAT_HAS_JOURNAL is
set.
* - 0xD0
- \_\_u8
- s\_journal\_uuid[16]
- __u8
- s_journal_uuid[16]
- UUID of journal superblock
* - 0xE0
- \_\_le32
- s\_journal\_inum
- __le32
- s_journal_inum
- inode number of journal file.
* - 0xE4
- \_\_le32
- s\_journal\_dev
- __le32
- s_journal_dev
- Device number of journal file, if the external journal feature flag is
set.
* - 0xE8
- \_\_le32
- s\_last\_orphan
- __le32
- s_last_orphan
- Start of list of orphaned inodes to delete.
* - 0xEC
- \_\_le32
- s\_hash\_seed[4]
- __le32
- s_hash_seed[4]
- HTREE hash seed.
* - 0xFC
- \_\_u8
- s\_def\_hash\_version
- __u8
- s_def_hash_version
- Default hash algorithm to use for directory hashes. See super_def_hash_
for more info.
* - 0xFD
- \_\_u8
- s\_jnl\_backup\_type
- If this value is 0 or EXT3\_JNL\_BACKUP\_BLOCKS (1), then the
- __u8
- s_jnl_backup_type
- If this value is 0 or EXT3_JNL_BACKUP_BLOCKS (1), then the
``s_jnl_blocks`` field contains a duplicate copy of the inode's
``i_block[]`` array and ``i_size``.
* - 0xFE
- \_\_le16
- s\_desc\_size
- __le16
- s_desc_size
- Size of group descriptors, in bytes, if the 64bit incompat feature flag
is set.
* - 0x100
- \_\_le32
- s\_default\_mount\_opts
- __le32
- s_default_mount_opts
- Default mount options. See the super_mountopts_ table for more info.
* - 0x104
- \_\_le32
- s\_first\_meta\_bg
- First metablock block group, if the meta\_bg feature is enabled.
- __le32
- s_first_meta_bg
- First metablock block group, if the meta_bg feature is enabled.
* - 0x108
- \_\_le32
- s\_mkfs\_time
- __le32
- s_mkfs_time
- When the filesystem was created, in seconds since the epoch.
* - 0x10C
- \_\_le32
- s\_jnl\_blocks[17]
- __le32
- s_jnl_blocks[17]
- Backup copy of the journal inode's ``i_block[]`` array in the first 15
elements and i\_size\_high and i\_size in the 16th and 17th elements,
elements and i_size_high and i_size in the 16th and 17th elements,
respectively.
* -
-
-
- 64bit support is valid only if EXT4_FEATURE_COMPAT_64BIT is set.
* - 0x150
- \_\_le32
- s\_blocks\_count\_hi
- __le32
- s_blocks_count_hi
- High 32-bits of the block count.
* - 0x154
- \_\_le32
- s\_r\_blocks\_count\_hi
- __le32
- s_r_blocks_count_hi
- High 32-bits of the reserved block count.
* - 0x158
- \_\_le32
- s\_free\_blocks\_count\_hi
- __le32
- s_free_blocks_count_hi
- High 32-bits of the free block count.
* - 0x15C
- \_\_le16
- s\_min\_extra\_isize
- __le16
- s_min_extra_isize
- All inodes have at least # bytes.
* - 0x15E
- \_\_le16
- s\_want\_extra\_isize
- __le16
- s_want_extra_isize
- New inodes should reserve # bytes.
* - 0x160
- \_\_le32
- s\_flags
- __le32
- s_flags
- Miscellaneous flags. See the super_flags_ table for more info.
* - 0x164
- \_\_le16
- s\_raid\_stride
- __le16
- s_raid_stride
- RAID stride. This is the number of logical blocks read from or written
to the disk before moving to the next disk. This affects the placement
of filesystem metadata, which will hopefully make RAID storage faster.
* - 0x166
- \_\_le16
- s\_mmp\_interval
- __le16
- s_mmp_interval
- #. seconds to wait in multi-mount prevention (MMP) checking. In theory,
MMP is a mechanism to record in the superblock which host and device
have mounted the filesystem, in order to prevent multiple mounts. This
feature does not seem to be implemented...
* - 0x168
- \_\_le64
- s\_mmp\_block
- __le64
- s_mmp_block
- Block # for multi-mount protection data.
* - 0x170
- \_\_le32
- s\_raid\_stripe\_width
- __le32
- s_raid_stripe_width
- RAID stripe width. This is the number of logical blocks read from or
written to the disk before coming back to the current disk. This is used
by the block allocator to try to reduce the number of read-modify-write
operations in a RAID5/6.
* - 0x174
- \_\_u8
- s\_log\_groups\_per\_flex
- __u8
- s_log_groups_per_flex
- Size of a flexible block group is 2 ^ ``s_log_groups_per_flex``.
* - 0x175
- \_\_u8
- s\_checksum\_type
- __u8
- s_checksum_type
- Metadata checksum algorithm type. The only valid value is 1 (crc32c).
* - 0x176
- \_\_le16
- s\_reserved\_pad
- __le16
- s_reserved_pad
-
* - 0x178
- \_\_le64
- s\_kbytes\_written
- __le64
- s_kbytes_written
- Number of KiB written to this filesystem over its lifetime.
* - 0x180
- \_\_le32
- s\_snapshot\_inum
- __le32
- s_snapshot_inum
- inode number of active snapshot. (Not used in e2fsprogs/Linux.)
* - 0x184
- \_\_le32
- s\_snapshot\_id
- __le32
- s_snapshot_id
- Sequential ID of active snapshot. (Not used in e2fsprogs/Linux.)
* - 0x188
- \_\_le64
- s\_snapshot\_r\_blocks\_count
- __le64
- s_snapshot_r_blocks_count
- Number of blocks reserved for active snapshot's future use. (Not used in
e2fsprogs/Linux.)
* - 0x190
- \_\_le32
- s\_snapshot\_list
- __le32
- s_snapshot_list
- inode number of the head of the on-disk snapshot list. (Not used in
e2fsprogs/Linux.)
* - 0x194
- \_\_le32
- s\_error\_count
- __le32
- s_error_count
- Number of errors seen.
* - 0x198
- \_\_le32
- s\_first\_error\_time
- __le32
- s_first_error_time
- First time an error happened, in seconds since the epoch.
* - 0x19C
- \_\_le32
- s\_first\_error\_ino
- __le32
- s_first_error_ino
- inode involved in first error.
* - 0x1A0
- \_\_le64
- s\_first\_error\_block
- __le64
- s_first_error_block
- Number of block involved of first error.
* - 0x1A8
- \_\_u8
- s\_first\_error\_func[32]
- __u8
- s_first_error_func[32]
- Name of function where the error happened.
* - 0x1C8
- \_\_le32
- s\_first\_error\_line
- __le32
- s_first_error_line
- Line number where error happened.
* - 0x1CC
- \_\_le32
- s\_last\_error\_time
- __le32
- s_last_error_time
- Time of most recent error, in seconds since the epoch.
* - 0x1D0
- \_\_le32
- s\_last\_error\_ino
- __le32
- s_last_error_ino
- inode involved in most recent error.
* - 0x1D4
- \_\_le32
- s\_last\_error\_line
- __le32
- s_last_error_line
- Line number where most recent error happened.
* - 0x1D8
- \_\_le64
- s\_last\_error\_block
- __le64
- s_last_error_block
- Number of block involved in most recent error.
* - 0x1E0
- \_\_u8
- s\_last\_error\_func[32]
- __u8
- s_last_error_func[32]
- Name of function where the most recent error happened.
* - 0x200
- \_\_u8
- s\_mount\_opts[64]
- __u8
- s_mount_opts[64]
- ASCIIZ string of mount options.
* - 0x240
- \_\_le32
- s\_usr\_quota\_inum
- __le32
- s_usr_quota_inum
- Inode number of user `quota <quota>`__ file.
* - 0x244
- \_\_le32
- s\_grp\_quota\_inum
- __le32
- s_grp_quota_inum
- Inode number of group `quota <quota>`__ file.
* - 0x248
- \_\_le32
- s\_overhead\_blocks
- __le32
- s_overhead_blocks
- Overhead blocks/clusters in fs. (Huh? This field is always zero, which
means that the kernel calculates it dynamically.)
* - 0x24C
- \_\_le32
- s\_backup\_bgs[2]
- Block groups containing superblock backups (if sparse\_super2)
- __le32
- s_backup_bgs[2]
- Block groups containing superblock backups (if sparse_super2)
* - 0x254
- \_\_u8
- s\_encrypt\_algos[4]
- __u8
- s_encrypt_algos[4]
- Encryption algorithms in use. There can be up to four algorithms in use
at any time; valid algorithm codes are given in the super_encrypt_ table
below.
* - 0x258
- \_\_u8
- s\_encrypt\_pw\_salt[16]
- __u8
- s_encrypt_pw_salt[16]
- Salt for the string2key algorithm for encryption.
* - 0x268
- \_\_le32
- s\_lpf\_ino
- __le32
- s_lpf_ino
- Inode number of lost+found
* - 0x26C
- \_\_le32
- s\_prj\_quota\_inum
- __le32
- s_prj_quota_inum
- Inode that tracks project quotas.
* - 0x270
- \_\_le32
- s\_checksum\_seed
- Checksum seed used for metadata\_csum calculations. This value is
crc32c(~0, $orig\_fs\_uuid).
- __le32
- s_checksum_seed
- Checksum seed used for metadata_csum calculations. This value is
crc32c(~0, $orig_fs_uuid).
* - 0x274
- \_\_u8
- s\_wtime_hi
- __u8
- s_wtime_hi
- Upper 8 bits of the s_wtime field.
* - 0x275
- \_\_u8
- s\_mtime_hi
- __u8
- s_mtime_hi
- Upper 8 bits of the s_mtime field.
* - 0x276
- \_\_u8
- s\_mkfs_time_hi
- __u8
- s_mkfs_time_hi
- Upper 8 bits of the s_mkfs_time field.
* - 0x277
- \_\_u8
- s\_lastcheck_hi
- __u8
- s_lastcheck_hi
- Upper 8 bits of the s_lastcheck_hi field.
* - 0x278
- \_\_u8
- s\_first_error_time_hi
- __u8
- s_first_error_time_hi
- Upper 8 bits of the s_first_error_time_hi field.
* - 0x279
- \_\_u8
- s\_last_error_time_hi
- __u8
- s_last_error_time_hi
- Upper 8 bits of the s_last_error_time_hi field.
* - 0x27A
- \_\_u8
- s\_pad[2]
- __u8
- s_pad[2]
- Zero padding.
* - 0x27C
- \_\_le16
- s\_encoding
- __le16
- s_encoding
- Filename charset encoding.
* - 0x27E
- \_\_le16
- s\_encoding_flags
- __le16
- s_encoding_flags
- Filename charset encoding flags.
* - 0x280
- \_\_le32
- s\_orphan\_file\_inum
- __le32
- s_orphan_file_inum
- Orphan file inode number.
* - 0x284
- \_\_le32
- s\_reserved[94]
- __le32
- s_reserved[94]
- Padding to the end of the block.
* - 0x3FC
- \_\_le32
- s\_checksum
- __le32
- s_checksum
- Superblock checksum.
.. _super_state:
@ -574,44 +574,44 @@ following:
* - Value
- Description
* - 0x1
- Directory preallocation (COMPAT\_DIR\_PREALLOC).
- Directory preallocation (COMPAT_DIR_PREALLOC).
* - 0x2
- “imagic inodes”. Not clear from the code what this does
(COMPAT\_IMAGIC\_INODES).
(COMPAT_IMAGIC_INODES).
* - 0x4
- Has a journal (COMPAT\_HAS\_JOURNAL).
- Has a journal (COMPAT_HAS_JOURNAL).
* - 0x8
- Supports extended attributes (COMPAT\_EXT\_ATTR).
- Supports extended attributes (COMPAT_EXT_ATTR).
* - 0x10
- Has reserved GDT blocks for filesystem expansion
(COMPAT\_RESIZE\_INODE). Requires RO\_COMPAT\_SPARSE\_SUPER.
(COMPAT_RESIZE_INODE). Requires RO_COMPAT_SPARSE_SUPER.
* - 0x20
- Has directory indices (COMPAT\_DIR\_INDEX).
- Has directory indices (COMPAT_DIR_INDEX).
* - 0x40
- “Lazy BG”. Not in Linux kernel, seems to have been for uninitialized
block groups? (COMPAT\_LAZY\_BG)
block groups? (COMPAT_LAZY_BG)
* - 0x80
- “Exclude inode”. Not used. (COMPAT\_EXCLUDE\_INODE).
- “Exclude inode”. Not used. (COMPAT_EXCLUDE_INODE).
* - 0x100
- “Exclude bitmap”. Seems to be used to indicate the presence of
snapshot-related exclude bitmaps? Not defined in kernel or used in
e2fsprogs (COMPAT\_EXCLUDE\_BITMAP).
e2fsprogs (COMPAT_EXCLUDE_BITMAP).
* - 0x200
- Sparse Super Block, v2. If this flag is set, the SB field s\_backup\_bgs
- Sparse Super Block, v2. If this flag is set, the SB field s_backup_bgs
points to the two block groups that contain backup superblocks
(COMPAT\_SPARSE\_SUPER2).
(COMPAT_SPARSE_SUPER2).
* - 0x400
- Fast commits supported. Although fast commits blocks are
backward incompatible, fast commit blocks are not always
present in the journal. If fast commit blocks are present in
the journal, JBD2 incompat feature
(JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) gets
set (COMPAT\_FAST\_COMMIT).
(JBD2_FEATURE_INCOMPAT_FAST_COMMIT) gets
set (COMPAT_FAST_COMMIT).
* - 0x1000
- Orphan file allocated. This is the special file for more efficient
tracking of unlinked but still open inodes. When there may be any
entries in the file, we additionally set proper rocompat feature
(RO\_COMPAT\_ORPHAN\_PRESENT).
(RO_COMPAT_ORPHAN_PRESENT).
.. _super_incompat:
@ -625,45 +625,45 @@ following:
* - Value
- Description
* - 0x1
- Compression (INCOMPAT\_COMPRESSION).
- Compression (INCOMPAT_COMPRESSION).
* - 0x2
- Directory entries record the file type. See ext4\_dir\_entry\_2 below
(INCOMPAT\_FILETYPE).
- Directory entries record the file type. See ext4_dir_entry_2 below
(INCOMPAT_FILETYPE).
* - 0x4
- Filesystem needs recovery (INCOMPAT\_RECOVER).
- Filesystem needs recovery (INCOMPAT_RECOVER).
* - 0x8
- Filesystem has a separate journal device (INCOMPAT\_JOURNAL\_DEV).
- Filesystem has a separate journal device (INCOMPAT_JOURNAL_DEV).
* - 0x10
- Meta block groups. See the earlier discussion of this feature
(INCOMPAT\_META\_BG).
(INCOMPAT_META_BG).
* - 0x40
- Files in this filesystem use extents (INCOMPAT\_EXTENTS).
- Files in this filesystem use extents (INCOMPAT_EXTENTS).
* - 0x80
- Enable a filesystem size of 2^64 blocks (INCOMPAT\_64BIT).
- Enable a filesystem size of 2^64 blocks (INCOMPAT_64BIT).
* - 0x100
- Multiple mount protection (INCOMPAT\_MMP).
- Multiple mount protection (INCOMPAT_MMP).
* - 0x200
- Flexible block groups. See the earlier discussion of this feature
(INCOMPAT\_FLEX\_BG).
(INCOMPAT_FLEX_BG).
* - 0x400
- Inodes can be used to store large extended attribute values
(INCOMPAT\_EA\_INODE).
(INCOMPAT_EA_INODE).
* - 0x1000
- Data in directory entry (INCOMPAT\_DIRDATA). (Not implemented?)
- Data in directory entry (INCOMPAT_DIRDATA). (Not implemented?)
* - 0x2000
- Metadata checksum seed is stored in the superblock. This feature enables
the administrator to change the UUID of a metadata\_csum filesystem
the administrator to change the UUID of a metadata_csum filesystem
while the filesystem is mounted; without it, the checksum definition
requires all metadata blocks to be rewritten (INCOMPAT\_CSUM\_SEED).
requires all metadata blocks to be rewritten (INCOMPAT_CSUM_SEED).
* - 0x4000
- Large directory >2GB or 3-level htree (INCOMPAT\_LARGEDIR). Prior to
- Large directory >2GB or 3-level htree (INCOMPAT_LARGEDIR). Prior to
this feature, directories could not be larger than 4GiB and could not
have an htree more than 2 levels deep. If this feature is enabled,
directories can be larger than 4GiB and have a maximum htree depth of 3.
* - 0x8000
- Data in inode (INCOMPAT\_INLINE\_DATA).
- Data in inode (INCOMPAT_INLINE_DATA).
* - 0x10000
- Encrypted inodes are present on the filesystem. (INCOMPAT\_ENCRYPT).
- Encrypted inodes are present on the filesystem. (INCOMPAT_ENCRYPT).
.. _super_rocompat:
@ -678,54 +678,54 @@ the following:
- Description
* - 0x1
- Sparse superblocks. See the earlier discussion of this feature
(RO\_COMPAT\_SPARSE\_SUPER).
(RO_COMPAT_SPARSE_SUPER).
* - 0x2
- This filesystem has been used to store a file greater than 2GiB
(RO\_COMPAT\_LARGE\_FILE).
(RO_COMPAT_LARGE_FILE).
* - 0x4
- Not used in kernel or e2fsprogs (RO\_COMPAT\_BTREE\_DIR).
- Not used in kernel or e2fsprogs (RO_COMPAT_BTREE_DIR).
* - 0x8
- This filesystem has files whose sizes are represented in units of
logical blocks, not 512-byte sectors. This implies a very large file
indeed! (RO\_COMPAT\_HUGE\_FILE)
indeed! (RO_COMPAT_HUGE_FILE)
* - 0x10
- Group descriptors have checksums. In addition to detecting corruption,
this is useful for lazy formatting with uninitialized groups
(RO\_COMPAT\_GDT\_CSUM).
(RO_COMPAT_GDT_CSUM).
* - 0x20
- Indicates that the old ext3 32,000 subdirectory limit no longer applies
(RO\_COMPAT\_DIR\_NLINK). A directory's i\_links\_count will be set to 1
(RO_COMPAT_DIR_NLINK). A directory's i_links_count will be set to 1
if it is incremented past 64,999.
* - 0x40
- Indicates that large inodes exist on this filesystem
(RO\_COMPAT\_EXTRA\_ISIZE).
(RO_COMPAT_EXTRA_ISIZE).
* - 0x80
- This filesystem has a snapshot (RO\_COMPAT\_HAS\_SNAPSHOT).
- This filesystem has a snapshot (RO_COMPAT_HAS_SNAPSHOT).
* - 0x100
- `Quota <Quota>`__ (RO\_COMPAT\_QUOTA).
- `Quota <Quota>`__ (RO_COMPAT_QUOTA).
* - 0x200
- This filesystem supports “bigalloc”, which means that file extents are
tracked in units of clusters (of blocks) instead of blocks
(RO\_COMPAT\_BIGALLOC).
(RO_COMPAT_BIGALLOC).
* - 0x400
- This filesystem supports metadata checksumming.
(RO\_COMPAT\_METADATA\_CSUM; implies RO\_COMPAT\_GDT\_CSUM, though
GDT\_CSUM must not be set)
(RO_COMPAT_METADATA_CSUM; implies RO_COMPAT_GDT_CSUM, though
GDT_CSUM must not be set)
* - 0x800
- Filesystem supports replicas. This feature is neither in the kernel nor
e2fsprogs. (RO\_COMPAT\_REPLICA)
e2fsprogs. (RO_COMPAT_REPLICA)
* - 0x1000
- Read-only filesystem image; the kernel will not mount this image
read-write and most tools will refuse to write to the image.
(RO\_COMPAT\_READONLY)
(RO_COMPAT_READONLY)
* - 0x2000
- Filesystem tracks project quotas. (RO\_COMPAT\_PROJECT)
- Filesystem tracks project quotas. (RO_COMPAT_PROJECT)
* - 0x8000
- Verity inodes may be present on the filesystem. (RO\_COMPAT\_VERITY)
- Verity inodes may be present on the filesystem. (RO_COMPAT_VERITY)
* - 0x10000
- Indicates orphan file may have valid orphan entries and thus we need
to clean them up when mounting the filesystem
(RO\_COMPAT\_ORPHAN\_PRESENT).
(RO_COMPAT_ORPHAN_PRESENT).
.. _super_def_hash:
@ -761,36 +761,36 @@ The ``s_default_mount_opts`` field is any combination of the following:
* - Value
- Description
* - 0x0001
- Print debugging info upon (re)mount. (EXT4\_DEFM\_DEBUG)
- Print debugging info upon (re)mount. (EXT4_DEFM_DEBUG)
* - 0x0002
- New files take the gid of the containing directory (instead of the fsgid
of the current process). (EXT4\_DEFM\_BSDGROUPS)
of the current process). (EXT4_DEFM_BSDGROUPS)
* - 0x0004
- Support userspace-provided extended attributes. (EXT4\_DEFM\_XATTR\_USER)
- Support userspace-provided extended attributes. (EXT4_DEFM_XATTR_USER)
* - 0x0008
- Support POSIX access control lists (ACLs). (EXT4\_DEFM\_ACL)
- Support POSIX access control lists (ACLs). (EXT4_DEFM_ACL)
* - 0x0010
- Do not support 32-bit UIDs. (EXT4\_DEFM\_UID16)
- Do not support 32-bit UIDs. (EXT4_DEFM_UID16)
* - 0x0020
- All data and metadata are commited to the journal.
(EXT4\_DEFM\_JMODE\_DATA)
(EXT4_DEFM_JMODE_DATA)
* - 0x0040
- All data are flushed to the disk before metadata are committed to the
journal. (EXT4\_DEFM\_JMODE\_ORDERED)
journal. (EXT4_DEFM_JMODE_ORDERED)
* - 0x0060
- Data ordering is not preserved; data may be written after the metadata
has been written. (EXT4\_DEFM\_JMODE\_WBACK)
has been written. (EXT4_DEFM_JMODE_WBACK)
* - 0x0100
- Disable write flushes. (EXT4\_DEFM\_NOBARRIER)
- Disable write flushes. (EXT4_DEFM_NOBARRIER)
* - 0x0200
- Track which blocks in a filesystem are metadata and therefore should not
be used as data blocks. This option will be enabled by default on 3.18,
hopefully. (EXT4\_DEFM\_BLOCK\_VALIDITY)
hopefully. (EXT4_DEFM_BLOCK_VALIDITY)
* - 0x0400
- Enable DISCARD support, where the storage device is told about blocks
becoming unused. (EXT4\_DEFM\_DISCARD)
becoming unused. (EXT4_DEFM_DISCARD)
* - 0x0800
- Disable delayed allocation. (EXT4\_DEFM\_NODELALLOC)
- Disable delayed allocation. (EXT4_DEFM_NODELALLOC)
.. _super_flags:
@ -820,12 +820,12 @@ The ``s_encrypt_algos`` list can contain any of the following:
* - Value
- Description
* - 0
- Invalid algorithm (ENCRYPTION\_MODE\_INVALID).
- Invalid algorithm (ENCRYPTION_MODE_INVALID).
* - 1
- 256-bit AES in XTS mode (ENCRYPTION\_MODE\_AES\_256\_XTS).
- 256-bit AES in XTS mode (ENCRYPTION_MODE_AES_256_XTS).
* - 2
- 256-bit AES in GCM mode (ENCRYPTION\_MODE\_AES\_256\_GCM).
- 256-bit AES in GCM mode (ENCRYPTION_MODE_AES_256_GCM).
* - 3
- 256-bit AES in CBC mode (ENCRYPTION\_MODE\_AES\_256\_CBC).
- 256-bit AES in CBC mode (ENCRYPTION_MODE_AES_256_CBC).
Total size of the superblock is 1024 bytes.

View File

@ -129,18 +129,24 @@ yet. Bug reports are always welcome at the issue tracker below!
* - arm64
- Supported
- ``LLVM=1``
* - hexagon
- Maintained
- ``LLVM=1``
* - mips
- Maintained
- ``CC=clang``
- ``LLVM=1``
* - powerpc
- Maintained
- ``CC=clang``
* - riscv
- Maintained
- ``CC=clang``
- ``LLVM=1``
* - s390
- Maintained
- ``CC=clang``
* - um (User Mode)
- Maintained
- ``LLVM=1``
* - x86
- Supported
- ``LLVM=1``

View File

@ -45,10 +45,12 @@ Name Alias Usage Preserved
``$r23``-``$r31`` ``$s0``-``$s8`` Static registers Yes
================= =============== =================== ============
Note: The register ``$r21`` is reserved in the ELF psABI, but used by the Linux
kernel for storing the percpu base address. It normally has no ABI name, but is
called ``$u0`` in the kernel. You may also see ``$v0`` or ``$v1`` in some old code,
however they are deprecated aliases of ``$a0`` and ``$a1`` respectively.
.. Note::
The register ``$r21`` is reserved in the ELF psABI, but used by the Linux
kernel for storing the percpu base address. It normally has no ABI name,
but is called ``$u0`` in the kernel. You may also see ``$v0`` or ``$v1``
in some old code,however they are deprecated aliases of ``$a0`` and ``$a1``
respectively.
FPRs
----
@ -69,8 +71,9 @@ Name Alias Usage Preserved
``$f24``-``$f31`` ``$fs0``-``$fs7`` Static registers Yes
================= ================== =================== ============
Note: You may see ``$fv0`` or ``$fv1`` in some old code, however they are deprecated
aliases of ``$fa0`` and ``$fa1`` respectively.
.. Note::
You may see ``$fv0`` or ``$fv1`` in some old code, however they are
deprecated aliases of ``$fa0`` and ``$fa1`` respectively.
VRs
----

View File

@ -145,12 +145,16 @@ Documentation of Loongson's LS7A chipset:
https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-7A1000-usermanual-2.00-EN.pdf (in English)
Note: CPUINTC is CSR.ECFG/CSR.ESTAT and its interrupt controller described
in Section 7.4 of "LoongArch Reference Manual, Vol 1"; LIOINTC is "Legacy I/O
Interrupts" described in Section 11.1 of "Loongson 3A5000 Processor Reference
Manual"; EIOINTC is "Extended I/O Interrupts" described in Section 11.2 of
"Loongson 3A5000 Processor Reference Manual"; HTVECINTC is "HyperTransport
Interrupts" described in Section 14.3 of "Loongson 3A5000 Processor Reference
Manual"; PCH-PIC/PCH-MSI is "Interrupt Controller" described in Section 5 of
"Loongson 7A1000 Bridge User Manual"; PCH-LPC is "LPC Interrupts" described in
Section 24.3 of "Loongson 7A1000 Bridge User Manual".
.. Note::
- CPUINTC is CSR.ECFG/CSR.ESTAT and its interrupt controller described
in Section 7.4 of "LoongArch Reference Manual, Vol 1";
- LIOINTC is "Legacy I/OInterrupts" described in Section 11.1 of
"Loongson 3A5000 Processor Reference Manual";
- EIOINTC is "Extended I/O Interrupts" described in Section 11.2 of
"Loongson 3A5000 Processor Reference Manual";
- HTVECINTC is "HyperTransport Interrupts" described in Section 14.3 of
"Loongson 3A5000 Processor Reference Manual";
- PCH-PIC/PCH-MSI is "Interrupt Controller" described in Section 5 of
"Loongson 7A1000 Bridge User Manual";
- PCH-LPC is "LPC Interrupts" described in Section 24.3 of
"Loongson 7A1000 Bridge User Manual".

View File

@ -2925,6 +2925,43 @@ plpmtud_probe_interval - INTEGER
Default: 0
reconf_enable - BOOLEAN
Enable or disable extension of Stream Reconfiguration functionality
specified in RFC6525. This extension provides the ability to "reset"
a stream, and it includes the Parameters of "Outgoing/Incoming SSN
Reset", "SSN/TSN Reset" and "Add Outgoing/Incoming Streams".
- 1: Enable extension.
- 0: Disable extension.
Default: 0
intl_enable - BOOLEAN
Enable or disable extension of User Message Interleaving functionality
specified in RFC8260. This extension allows the interleaving of user
messages sent on different streams. With this feature enabled, I-DATA
chunk will replace DATA chunk to carry user messages if also supported
by the peer. Note that to use this feature, one needs to set this option
to 1 and also needs to set socket options SCTP_FRAGMENT_INTERLEAVE to 2
and SCTP_INTERLEAVING_SUPPORTED to 1.
- 1: Enable extension.
- 0: Disable extension.
Default: 0
ecn_enable - BOOLEAN
Control use of Explicit Congestion Notification (ECN) by SCTP.
Like in TCP, ECN is used only when both ends of the SCTP connection
indicate support for it. This feature is useful in avoiding losses
due to congestion by allowing supporting routers to signal congestion
before having to drop packets.
1: Enable ecn.
0: Disable ecn.
Default: 1
``/proc/sys/net/core/*``
========================

View File

@ -104,7 +104,7 @@ Whenever possible, use the PHY side RGMII delay for these reasons:
* PHY device drivers in PHYLIB being reusable by nature, being able to
configure correctly a specified delay enables more designs with similar delay
requirements to be operate correctly
requirements to be operated correctly
For cases where the PHY is not capable of providing this delay, but the
Ethernet MAC driver is capable of doing so, the correct phy_interface_t value

View File

@ -6,6 +6,15 @@
netdev FAQ
==========
tl;dr
-----
- designate your patch to a tree - ``[PATCH net]`` or ``[PATCH net-next]``
- for fixes the ``Fixes:`` tag is required, regardless of the tree
- don't post large series (> 15 patches), break them up
- don't repost your patches within one 24h period
- reverse xmas tree
What is netdev?
---------------
It is a mailing list for all network-related Linux stuff. This
@ -136,6 +145,20 @@ it to the maintainer to figure out what is the most recent and current
version that should be applied. If there is any doubt, the maintainer
will reply and ask what should be done.
How do I divide my work into patches?
-------------------------------------
Put yourself in the shoes of the reviewer. Each patch is read separately
and therefore should constitute a comprehensible step towards your stated
goal.
Avoid sending series longer than 15 patches. Larger series takes longer
to review as reviewers will defer looking at it until they find a large
chunk of time. A small series can be reviewed in a short time, so Maintainers
just do it. As a result, a sequence of smaller series gets merged quicker and
with better review coverage. Re-posting large series also increases the mailing
list traffic.
I made changes to only a few patches in a patch series should I resend only those changed?
------------------------------------------------------------------------------------------
No, please resend the entire patch series and make sure you do number your
@ -183,6 +206,19 @@ it is requested that you make it look like this::
* another line of text
*/
What is "reverse xmas tree"?
----------------------------
Netdev has a convention for ordering local variables in functions.
Order the variable declaration lines longest to shortest, e.g.::
struct scatterlist *sg;
struct sk_buff *skb;
int err, i;
If there are dependencies between the variables preventing the ordering
move the initialization out of line.
I am working in existing code which uses non-standard formatting. Which formatting should I use?
------------------------------------------------------------------------------------------------
Make your code follow the most recent guidelines, so that eventually all code

View File

@ -46,10 +46,11 @@ LA64中每个寄存器为64位宽。 ``$r0`` 的内容总是固定为0而其
``$r23``-``$r31`` ``$s0``-``$s8`` 静态寄存器 是
================= =============== =================== ==========
注意:``$r21``寄存器在ELF psABI中保留未使用但是在Linux内核用于保存每CPU
变量基地址。该寄存器没有ABI命名不过在内核中称为``$u0``。在一些遗留代码
中有时可能见到``$v0````$v1``,它们是``$a0````$a1``的别名,属于已经废弃
的用法。
.. note::
注意: ``$r21`` 寄存器在ELF psABI中保留未使用但是在Linux内核用于保
存每CPU变量基地址。该寄存器没有ABI命名不过在内核中称为 ``$u0`` 。在
一些遗留代码中有时可能见到 ``$v0````$v1`` ,它们是 ``$a0``
``$a1`` 的别名,属于已经废弃的用法。
浮点寄存器
----------
@ -68,8 +69,9 @@ LA64中每个寄存器为64位宽。 ``$r0`` 的内容总是固定为0而其
``$f24``-``$f31`` ``$fs0``-``$fs7`` 静态寄存器 是
================= ================== =================== ==========
注意:在一些遗留代码中有时可能见到 ``$v0````$v1`` ,它们是 ``$a0``
``$a1`` 的别名,属于已经废弃的用法。
.. note::
注意:在一些遗留代码中有时可能见到 ``$v0````$v1`` ,它们是
``$a0````$a1`` 的别名,属于已经废弃的用法。
向量寄存器

View File

@ -147,9 +147,11 @@ PCH-LPC::
https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-7A1000-usermanual-2.00-EN.pdf (英文版)
CPUINTC即《龙芯架构参考手册卷一》第7.4节所描述的CSR.ECFG/CSR.ESTAT寄存器及其中断
控制逻辑LIOINTC即《龙芯3A5000处理器使用手册》第11.1节所描述的“传统I/O中断”EIOINTC
即《龙芯3A5000处理器使用手册》第11.2节所描述的“扩展I/O中断”HTVECINTC即《龙芯3A5000
处理器使用手册》第14.3节所描述的“HyperTransport中断”PCH-PIC/PCH-MSI即《龙芯7A1000桥
片用户手册》第5章所描述的“中断控制器”PCH-LPC即《龙芯7A1000桥片用户手册》第24.3节所
描述的“LPC中断”。
.. note::
- CPUINTC即《龙芯架构参考手册卷一》第7.4节所描述的CSR.ECFG/CSR.ESTAT寄存器及其
中断控制逻辑;
- LIOINTC即《龙芯3A5000处理器使用手册》第11.1节所描述的“传统I/O中断”
- EIOINTC即《龙芯3A5000处理器使用手册》第11.2节所描述的“扩展I/O中断”
- HTVECINTC即《龙芯3A5000处理器使用手册》第14.3节所描述的“HyperTransport中断”
- PCH-PIC/PCH-MSI即《龙芯7A1000桥片用户手册》第5章所描述的“中断控制器”
- PCH-LPC即《龙芯7A1000桥片用户手册》第24.3节所描述的“LPC中断”。

View File

@ -120,7 +120,8 @@ Testing
unpoison-pfn
Software-unpoison page at PFN echoed into this file. This way
a page can be reused again. This only works for Linux
injected failures, not for real memory failures.
injected failures, not for real memory failures. Once any hardware
memory failure happens, this feature is disabled.
Note these injection interfaces are not stable and might change between
kernel versions

View File

@ -426,7 +426,7 @@ F: drivers/acpi/*thermal*
ACPI VIOT DRIVER
M: Jean-Philippe Brucker <jean-philippe@linaro.org>
L: linux-acpi@vger.kernel.org
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Maintained
F: drivers/acpi/viot.c
F: include/linux/acpi_viot.h
@ -959,7 +959,7 @@ F: drivers/video/fbdev/geode/
AMD IOMMU (AMD-VI)
M: Joerg Roedel <joro@8bytes.org>
R: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: drivers/iommu/amd/
@ -2467,6 +2467,7 @@ ARM/NXP S32G ARCHITECTURE
M: Chester Lin <clin@suse.com>
R: Andreas Färber <afaerber@suse.de>
R: Matthias Brugger <mbrugger@suse.com>
R: NXP S32 Linux Team <s32@nxp.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm64/boot/dts/freescale/s32g*.dts*
@ -2537,6 +2538,7 @@ W: http://www.armlinux.org.uk/
ARM/QUALCOMM SUPPORT
M: Andy Gross <agross@kernel.org>
M: Bjorn Andersson <bjorn.andersson@linaro.org>
R: Konrad Dybcio <konrad.dybcio@somainline.org>
L: linux-arm-msm@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git
@ -3614,16 +3616,18 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
F: drivers/iio/accel/bma400*
BPF (Safe dynamic programs and tools)
BPF [GENERAL] (Safe Dynamic Programs and Tools)
M: Alexei Starovoitov <ast@kernel.org>
M: Daniel Borkmann <daniel@iogearbox.net>
M: Andrii Nakryiko <andrii@kernel.org>
R: Martin KaFai Lau <kafai@fb.com>
R: Song Liu <songliubraving@fb.com>
R: Martin KaFai Lau <martin.lau@linux.dev>
R: Song Liu <song@kernel.org>
R: Yonghong Song <yhs@fb.com>
R: John Fastabend <john.fastabend@gmail.com>
R: KP Singh <kpsingh@kernel.org>
L: netdev@vger.kernel.org
R: Stanislav Fomichev <sdf@google.com>
R: Hao Luo <haoluo@google.com>
R: Jiri Olsa <jolsa@kernel.org>
L: bpf@vger.kernel.org
S: Supported
W: https://bpf.io/
@ -3655,21 +3659,17 @@ F: scripts/pahole-version.sh
F: tools/bpf/
F: tools/lib/bpf/
F: tools/testing/selftests/bpf/
N: bpf
K: bpf
BPF JIT for ARM
M: Shubham Bansal <illusionist.neo@gmail.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
S: Odd Fixes
F: arch/arm/net/
BPF JIT for ARM64
M: Daniel Borkmann <daniel@iogearbox.net>
M: Alexei Starovoitov <ast@kernel.org>
M: Zi Shen Lim <zlim.lnx@gmail.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
F: arch/arm64/net/
@ -3677,29 +3677,26 @@ F: arch/arm64/net/
BPF JIT for MIPS (32-BIT AND 64-BIT)
M: Johan Almbladh <johan.almbladh@anyfinetworks.com>
M: Paul Burton <paulburton@kernel.org>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
F: arch/mips/net/
BPF JIT for NFP NICs
M: Jakub Kicinski <kuba@kernel.org>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
S: Odd Fixes
F: drivers/net/ethernet/netronome/nfp/bpf/
BPF JIT for POWERPC (32-BIT AND 64-BIT)
M: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
L: netdev@vger.kernel.org
M: Michael Ellerman <mpe@ellerman.id.au>
L: bpf@vger.kernel.org
S: Maintained
S: Supported
F: arch/powerpc/net/
BPF JIT for RISC-V (32-bit)
M: Luke Nelson <luke.r.nels@gmail.com>
M: Xi Wang <xi.wang@gmail.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
F: arch/riscv/net/
@ -3707,7 +3704,6 @@ X: arch/riscv/net/bpf_jit_comp64.c
BPF JIT for RISC-V (64-bit)
M: Björn Töpel <bjorn@kernel.org>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
F: arch/riscv/net/
@ -3717,36 +3713,80 @@ BPF JIT for S390
M: Ilya Leoshkevich <iii@linux.ibm.com>
M: Heiko Carstens <hca@linux.ibm.com>
M: Vasily Gorbik <gor@linux.ibm.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
S: Supported
F: arch/s390/net/
X: arch/s390/net/pnet.c
BPF JIT for SPARC (32-BIT AND 64-BIT)
M: David S. Miller <davem@davemloft.net>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
S: Odd Fixes
F: arch/sparc/net/
BPF JIT for X86 32-BIT
M: Wang YanQing <udknight@gmail.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
S: Odd Fixes
F: arch/x86/net/bpf_jit_comp32.c
BPF JIT for X86 64-BIT
M: Alexei Starovoitov <ast@kernel.org>
M: Daniel Borkmann <daniel@iogearbox.net>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Supported
F: arch/x86/net/
X: arch/x86/net/bpf_jit_comp32.c
BPF LSM (Security Audit and Enforcement using BPF)
BPF [CORE]
M: Alexei Starovoitov <ast@kernel.org>
M: Daniel Borkmann <daniel@iogearbox.net>
R: John Fastabend <john.fastabend@gmail.com>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/verifier.c
F: kernel/bpf/tnum.c
F: kernel/bpf/core.c
F: kernel/bpf/syscall.c
F: kernel/bpf/dispatcher.c
F: kernel/bpf/trampoline.c
F: include/linux/bpf*
F: include/linux/filter.h
BPF [BTF]
M: Martin KaFai Lau <martin.lau@linux.dev>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/btf.c
F: include/linux/btf*
BPF [TRACING]
M: Song Liu <song@kernel.org>
R: Jiri Olsa <jolsa@kernel.org>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/trace/bpf_trace.c
F: kernel/bpf/stackmap.c
BPF [NETWORKING] (tc BPF, sock_addr)
M: Martin KaFai Lau <martin.lau@linux.dev>
M: Daniel Borkmann <daniel@iogearbox.net>
R: John Fastabend <john.fastabend@gmail.com>
L: bpf@vger.kernel.org
L: netdev@vger.kernel.org
S: Maintained
F: net/core/filter.c
F: net/sched/act_bpf.c
F: net/sched/cls_bpf.c
BPF [NETWORKING] (struct_ops, reuseport)
M: Martin KaFai Lau <martin.lau@linux.dev>
L: bpf@vger.kernel.org
L: netdev@vger.kernel.org
S: Maintained
F: kernel/bpf/bpf_struct*
BPF [SECURITY & LSM] (Security Audit and Enforcement using BPF)
M: KP Singh <kpsingh@kernel.org>
R: Florent Revest <revest@chromium.org>
R: Brendan Jackman <jackmanb@chromium.org>
@ -3757,13 +3797,64 @@ F: include/linux/bpf_lsm.h
F: kernel/bpf/bpf_lsm.c
F: security/bpf/
BPFTOOL
BPF [STORAGE & CGROUPS]
M: Martin KaFai Lau <martin.lau@linux.dev>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/cgroup.c
F: kernel/bpf/*storage.c
F: kernel/bpf/bpf_lru*
BPF [RINGBUF]
M: Andrii Nakryiko <andrii@kernel.org>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/ringbuf.c
BPF [ITERATOR]
M: Yonghong Song <yhs@fb.com>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/*iter.c
BPF [L7 FRAMEWORK] (sockmap)
M: John Fastabend <john.fastabend@gmail.com>
M: Jakub Sitnicki <jakub@cloudflare.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
F: include/linux/skmsg.h
F: net/core/skmsg.c
F: net/core/sock_map.c
F: net/ipv4/tcp_bpf.c
F: net/ipv4/udp_bpf.c
F: net/unix/unix_bpf.c
BPF [LIBRARY] (libbpf)
M: Andrii Nakryiko <andrii@kernel.org>
L: bpf@vger.kernel.org
S: Maintained
F: tools/lib/bpf/
BPF [TOOLING] (bpftool)
M: Quentin Monnet <quentin@isovalent.com>
L: bpf@vger.kernel.org
S: Maintained
F: kernel/bpf/disasm.*
F: tools/bpf/bpftool/
BPF [SELFTESTS] (Test Runners & Infrastructure)
M: Andrii Nakryiko <andrii@kernel.org>
R: Mykola Lysenko <mykolal@fb.com>
L: bpf@vger.kernel.org
S: Maintained
F: tools/testing/selftests/bpf/
BPF [MISC]
L: bpf@vger.kernel.org
S: Odd Fixes
K: (?:\b|_)bpf(?:\b|_)
BROADCOM B44 10/100 ETHERNET DRIVER
M: Michael Chan <michael.chan@broadcom.com>
L: netdev@vger.kernel.org
@ -3796,12 +3887,12 @@ N: bcmbca
N: bcm[9]?47622
BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
M: Nicolas Saenz Julienne <nsaenz@kernel.org>
M: Florian Fainelli <f.fainelli@gmail.com>
R: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git
T: git git://github.com/broadcom/stblinux.git
F: Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
F: drivers/pci/controller/pcie-brcmstb.c
F: drivers/staging/vc04_services
@ -4959,6 +5050,7 @@ Q: http://patchwork.kernel.org/project/linux-clk/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git
F: Documentation/devicetree/bindings/clock/
F: drivers/clk/
F: include/dt-bindings/clock/
F: include/linux/clk-pr*
F: include/linux/clk/
F: include/linux/of_clk.h
@ -5009,7 +5101,7 @@ COMPUTE EXPRESS LINK (CXL)
M: Alison Schofield <alison.schofield@intel.com>
M: Vishal Verma <vishal.l.verma@intel.com>
M: Ira Weiny <ira.weiny@intel.com>
M: Ben Widawsky <ben.widawsky@intel.com>
M: Ben Widawsky <bwidawsk@kernel.org>
M: Dan Williams <dan.j.williams@intel.com>
L: linux-cxl@vger.kernel.org
S: Maintained
@ -5961,7 +6053,7 @@ DMA MAPPING HELPERS
M: Christoph Hellwig <hch@lst.de>
M: Marek Szyprowski <m.szyprowski@samsung.com>
R: Robin Murphy <robin.murphy@arm.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Supported
W: http://git.infradead.org/users/hch/dma-mapping.git
T: git git://git.infradead.org/users/hch/dma-mapping.git
@ -5973,7 +6065,7 @@ F: kernel/dma/
DMA MAPPING BENCHMARK
M: Xiang Chen <chenxiang66@hisilicon.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
F: kernel/dma/map_benchmark.c
F: tools/testing/selftests/dma/
@ -7592,7 +7684,7 @@ F: drivers/gpu/drm/exynos/exynos_dp*
EXYNOS SYSMMU (IOMMU) driver
M: Marek Szyprowski <m.szyprowski@samsung.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Maintained
F: drivers/iommu/exynos-iommu.c
@ -8514,6 +8606,7 @@ F: Documentation/devicetree/bindings/gpio/
F: Documentation/driver-api/gpio/
F: drivers/gpio/
F: include/asm-generic/gpio.h
F: include/dt-bindings/gpio/
F: include/linux/gpio.h
F: include/linux/gpio/
F: include/linux/of_gpio.h
@ -9167,6 +9260,7 @@ F: drivers/media/platform/st/sti/hva
HWPOISON MEMORY FAILURE HANDLING
M: Naoya Horiguchi <naoya.horiguchi@nec.com>
R: Miaohe Lin <linmiaohe@huawei.com>
L: linux-mm@kvack.org
S: Maintained
F: mm/hwpoison-inject.c
@ -9311,6 +9405,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
F: Documentation/devicetree/bindings/i2c/i2c.txt
F: Documentation/i2c/
F: drivers/i2c/*
F: include/dt-bindings/i2c/i2c.h
F: include/linux/i2c-dev.h
F: include/linux/i2c-smbus.h
F: include/linux/i2c.h
@ -9326,6 +9421,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
F: Documentation/devicetree/bindings/i2c/
F: drivers/i2c/algos/
F: drivers/i2c/busses/
F: include/dt-bindings/i2c/
I2C-TAOS-EVM DRIVER
M: Jean Delvare <jdelvare@suse.com>
@ -9846,7 +9942,10 @@ INTEL ASoC DRIVERS
M: Cezary Rojewski <cezary.rojewski@intel.com>
M: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
M: Liam Girdwood <liam.r.girdwood@linux.intel.com>
M: Jie Yang <yang.jie@linux.intel.com>
M: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
M: Bard Liao <yung-chuan.liao@linux.intel.com>
M: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
M: Kai Vehmanen <kai.vehmanen@linux.intel.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/intel/
@ -10009,7 +10108,7 @@ F: drivers/hid/intel-ish-hid/
INTEL IOMMU (VT-d)
M: David Woodhouse <dwmw2@infradead.org>
M: Lu Baolu <baolu.lu@linux.intel.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: drivers/iommu/intel/
@ -10388,7 +10487,7 @@ F: include/linux/iomap.h
IOMMU DRIVERS
M: Joerg Roedel <joro@8bytes.org>
M: Will Deacon <will@kernel.org>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: Documentation/devicetree/bindings/iommu/
@ -10865,6 +10964,7 @@ M: Marc Zyngier <maz@kernel.org>
R: James Morse <james.morse@arm.com>
R: Alexandru Elisei <alexandru.elisei@arm.com>
R: Suzuki K Poulose <suzuki.poulose@arm.com>
R: Oliver Upton <oliver.upton@linux.dev>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: kvmarm@lists.cs.columbia.edu (moderated for non-subscribers)
S: Maintained
@ -10907,7 +11007,6 @@ F: arch/riscv/include/asm/kvm*
F: arch/riscv/include/uapi/asm/kvm*
F: arch/riscv/kvm/
F: tools/testing/selftests/kvm/*/riscv/
F: tools/testing/selftests/kvm/riscv/
KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
M: Christian Borntraeger <borntraeger@linux.ibm.com>
@ -10932,28 +11031,51 @@ F: tools/testing/selftests/kvm/*/s390x/
F: tools/testing/selftests/kvm/s390x/
KERNEL VIRTUAL MACHINE FOR X86 (KVM/x86)
M: Sean Christopherson <seanjc@google.com>
M: Paolo Bonzini <pbonzini@redhat.com>
R: Sean Christopherson <seanjc@google.com>
R: Vitaly Kuznetsov <vkuznets@redhat.com>
R: Wanpeng Li <wanpengli@tencent.com>
R: Jim Mattson <jmattson@google.com>
R: Joerg Roedel <joro@8bytes.org>
L: kvm@vger.kernel.org
S: Supported
W: http://www.linux-kvm.org
T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
F: arch/x86/include/asm/kvm*
F: arch/x86/include/asm/pvclock-abi.h
F: arch/x86/include/asm/svm.h
F: arch/x86/include/asm/vmx*.h
F: arch/x86/include/uapi/asm/kvm*
F: arch/x86/include/uapi/asm/svm.h
F: arch/x86/include/uapi/asm/vmx.h
F: arch/x86/kernel/kvm.c
F: arch/x86/kernel/kvmclock.c
F: arch/x86/kvm/
F: arch/x86/kvm/*/
KVM PARAVIRT (KVM/paravirt)
M: Paolo Bonzini <pbonzini@redhat.com>
R: Wanpeng Li <wanpengli@tencent.com>
R: Vitaly Kuznetsov <vkuznets@redhat.com>
L: kvm@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
F: arch/x86/kernel/kvm.c
F: arch/x86/kernel/kvmclock.c
F: arch/x86/include/asm/pvclock-abi.h
F: include/linux/kvm_para.h
F: include/uapi/linux/kvm_para.h
F: include/uapi/asm-generic/kvm_para.h
F: include/asm-generic/kvm_para.h
F: arch/um/include/asm/kvm_para.h
F: arch/x86/include/asm/kvm_para.h
F: arch/x86/include/uapi/asm/kvm_para.h
KVM X86 HYPER-V (KVM/hyper-v)
M: Vitaly Kuznetsov <vkuznets@redhat.com>
M: Sean Christopherson <seanjc@google.com>
M: Paolo Bonzini <pbonzini@redhat.com>
L: kvm@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
F: arch/x86/kvm/hyperv.*
F: arch/x86/kvm/kvm_onhyperv.*
F: arch/x86/kvm/svm/hyperv.*
F: arch/x86/kvm/svm/svm_onhyperv.*
F: arch/x86/kvm/vmx/evmcs.*
KERNFS
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M: Tejun Heo <tj@kernel.org>
@ -11132,20 +11254,6 @@ S: Maintained
F: include/net/l3mdev.h
F: net/l3mdev
L7 BPF FRAMEWORK
M: John Fastabend <john.fastabend@gmail.com>
M: Daniel Borkmann <daniel@iogearbox.net>
M: Jakub Sitnicki <jakub@cloudflare.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
F: include/linux/skmsg.h
F: net/core/skmsg.c
F: net/core/sock_map.c
F: net/ipv4/tcp_bpf.c
F: net/ipv4/udp_bpf.c
F: net/unix/unix_bpf.c
LANDLOCK SECURITY MODULE
M: Mickaël Salaün <mic@digikod.net>
L: linux-security-module@vger.kernel.org
@ -11625,6 +11733,7 @@ F: drivers/gpu/drm/bridge/lontium-lt8912b.c
LOONGARCH
M: Huacai Chen <chenhuacai@kernel.org>
R: WANG Xuerui <kernel@xen0n.name>
L: loongarch@lists.linux.dev
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git
F: arch/loongarch/
@ -12537,7 +12646,7 @@ F: drivers/i2c/busses/i2c-mt65xx.c
MEDIATEK IOMMU DRIVER
M: Yong Wu <yong.wu@mediatek.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/iommu/mediatek*
@ -12880,9 +12989,8 @@ M: Andrew Morton <akpm@linux-foundation.org>
L: linux-mm@kvack.org
S: Maintained
W: http://www.linux-mm.org
T: quilt https://ozlabs.org/~akpm/mmotm/
T: quilt https://ozlabs.org/~akpm/mmots/
T: git git://github.com/hnaz/linux-mm.git
T: git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
T: quilt git://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new
F: include/linux/gfp.h
F: include/linux/memory_hotplug.h
F: include/linux/mm.h
@ -12892,6 +13000,18 @@ F: include/linux/vmalloc.h
F: mm/
F: tools/testing/selftests/vm/
MEMORY HOT(UN)PLUG
M: David Hildenbrand <david@redhat.com>
M: Oscar Salvador <osalvador@suse.de>
L: linux-mm@kvack.org
S: Maintained
F: Documentation/admin-guide/mm/memory-hotplug.rst
F: Documentation/core-api/memory-hotplug.rst
F: drivers/base/memory.c
F: include/linux/memory_hotplug.h
F: mm/memory_hotplug.c
F: tools/testing/selftests/memory-hotplug/
MEMORY TECHNOLOGY DEVICES (MTD)
M: Miquel Raynal <miquel.raynal@bootlin.com>
M: Richard Weinberger <richard@nod.at>
@ -13836,6 +13956,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
F: Documentation/devicetree/bindings/net/
F: drivers/connector/
F: drivers/net/
F: include/dt-bindings/net/
F: include/linux/etherdevice.h
F: include/linux/fcdevice.h
F: include/linux/fddidevice.h
@ -13987,7 +14108,6 @@ F: net/ipv6/tcp*.c
NETWORKING [TLS]
M: Boris Pismenny <borisp@nvidia.com>
M: John Fastabend <john.fastabend@gmail.com>
M: Daniel Borkmann <daniel@iogearbox.net>
M: Jakub Kicinski <kuba@kernel.org>
L: netdev@vger.kernel.org
S: Maintained
@ -14296,7 +14416,7 @@ F: drivers/iio/gyro/fxas21002c_i2c.c
F: drivers/iio/gyro/fxas21002c_spi.c
NXP i.MX CLOCK DRIVERS
M: Abel Vesa <abel.vesa@nxp.com>
M: Abel Vesa <abelvesa@kernel.org>
L: linux-clk@vger.kernel.org
L: linux-imx@nxp.com
S: Maintained
@ -14384,9 +14504,8 @@ F: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
F: sound/soc/codecs/tfa989x.c
NXP-NCI NFC DRIVER
R: Charles Gorand <charles.gorand@effinnov.com>
L: linux-nfc@lists.01.org (subscribers-only)
S: Supported
S: Orphan
F: Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
F: drivers/nfc/nxp-nci
@ -14904,6 +15023,7 @@ F: include/dt-bindings/
OPENCOMPUTE PTP CLOCK DRIVER
M: Jonathan Lemon <jonathan.lemon@gmail.com>
M: Vadim Fedorenko <vadfed@fb.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/ptp/ptp_ocp.c
@ -15774,7 +15894,7 @@ F: drivers/pinctrl/freescale/
PIN CONTROLLER - INTEL
M: Mika Westerberg <mika.westerberg@linux.intel.com>
M: Andy Shevchenko <andy@kernel.org>
S: Maintained
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git
F: drivers/pinctrl/intel/
@ -16296,7 +16416,7 @@ F: drivers/crypto/qat/
QCOM AUDIO (ASoC) DRIVERS
M: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
M: Banajit Goswami <bgoswami@codeaurora.org>
M: Banajit Goswami <bgoswami@quicinc.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/codecs/lpass-va-macro.c
@ -16523,7 +16643,7 @@ F: Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
F: drivers/cpufreq/qcom-cpufreq-nvmem.c
QUALCOMM CRYPTO DRIVERS
M: Thara Gopinath <thara.gopinath@linaro.org>
M: Thara Gopinath <thara.gopinath@gmail.com>
L: linux-crypto@vger.kernel.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
@ -16577,7 +16697,7 @@ F: drivers/i2c/busses/i2c-qcom-cci.c
QUALCOMM IOMMU
M: Rob Clark <robdclark@gmail.com>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/iommu/arm/arm-smmu/qcom_iommu.c
@ -16633,7 +16753,7 @@ F: include/linux/if_rmnet.h
QUALCOMM TSENS THERMAL DRIVER
M: Amit Kucheria <amitk@kernel.org>
M: Thara Gopinath <thara.gopinath@linaro.org>
M: Thara Gopinath <thara.gopinath@gmail.com>
L: linux-pm@vger.kernel.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
@ -18090,6 +18210,7 @@ F: drivers/misc/sgi-xp/
SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS
M: Karsten Graul <kgraul@linux.ibm.com>
M: Wenjia Zhang <wenjia@linux.ibm.com>
L: linux-s390@vger.kernel.org
S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
@ -18722,8 +18843,10 @@ F: sound/soc/
SOUND - SOUND OPEN FIRMWARE (SOF) DRIVERS
M: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
M: Liam Girdwood <lgirdwood@gmail.com>
M: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
M: Bard Liao <yung-chuan.liao@linux.intel.com>
M: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
M: Kai Vehmanen <kai.vehmanen@linux.intel.com>
R: Kai Vehmanen <kai.vehmanen@linux.intel.com>
M: Daniel Baluta <daniel.baluta@nxp.com>
L: sound-open-firmware@alsa-project.org (moderated for non-subscribers)
S: Supported
@ -19202,7 +19325,7 @@ F: arch/x86/boot/video*
SWIOTLB SUBSYSTEM
M: Christoph Hellwig <hch@infradead.org>
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Supported
W: http://git.infradead.org/users/hch/dma-mapping.git
T: git git://git.infradead.org/users/hch/dma-mapping.git
@ -19340,7 +19463,7 @@ R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
R: Mika Westerberg <mika.westerberg@linux.intel.com>
R: Jan Dabros <jsd@semihalf.com>
L: linux-i2c@vger.kernel.org
S: Maintained
S: Supported
F: drivers/i2c/busses/i2c-designware-*
SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
@ -20747,6 +20870,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
F: Documentation/devicetree/bindings/usb/
F: Documentation/usb/
F: drivers/usb/
F: include/dt-bindings/usb/
F: include/linux/usb.h
F: include/linux/usb/
@ -21876,7 +22000,7 @@ XEN SWIOTLB SUBSYSTEM
M: Juergen Gross <jgross@suse.com>
M: Stefano Stabellini <sstabellini@kernel.org>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
L: iommu@lists.linux-foundation.org
L: iommu@lists.linux.dev
S: Supported
F: arch/x86/xen/*swiotlb*
F: drivers/xen/*swiotlb*

View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 19
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc6
NAME = Superb Owl
# *DOCUMENTATION*
@ -1141,7 +1141,7 @@ KBUILD_MODULES := 1
autoksyms_recursive: descend modules.order
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
"$(MAKE) -f $(srctree)/Makefile vmlinux"
"$(MAKE) -f $(srctree)/Makefile autoksyms_recursive"
endif
autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h)

View File

@ -1586,7 +1586,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-lenovo-hr630.dtb \
aspeed-bmc-lenovo-hr855xg2.dtb \
aspeed-bmc-microsoft-olympus.dtb \
aspeed-bmc-nuvia-dc-scm.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-mihawk.dtb \
aspeed-bmc-opp-mowgli.dtb \
@ -1599,6 +1598,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-witherspoon.dtb \
aspeed-bmc-opp-zaius.dtb \
aspeed-bmc-portwell-neptune.dtb \
aspeed-bmc-qcom-dc-scm-v1.dtb \
aspeed-bmc-quanta-q71l.dtb \
aspeed-bmc-quanta-s6q.dtb \
aspeed-bmc-supermicro-x11spi.dtb \

View File

@ -6,8 +6,8 @@
#include "aspeed-g6.dtsi"
/ {
model = "Nuvia DC-SCM BMC";
compatible = "nuvia,dc-scm-bmc", "aspeed,ast2600";
model = "Qualcomm DC-SCM V1 BMC";
compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
aliases {
serial4 = &uart5;

View File

@ -233,10 +233,9 @@
status = "okay";
eeprom@53 {
compatible = "atmel,24c32";
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
size = <128>;
status = "okay";
};
};

View File

@ -329,21 +329,21 @@
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
status = "okay";
};
eeprom@52 {
compatible = "atmel,24c32";
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
status = "disabled";
};
eeprom@53 {
compatible = "atmel,24c32";
compatible = "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
status = "disabled";

View File

@ -120,26 +120,31 @@
port@0 {
reg = <0>;
label = "lan1";
phy-mode = "internal";
};
port@1 {
reg = <1>;
label = "lan2";
phy-mode = "internal";
};
port@2 {
reg = <2>;
label = "lan3";
phy-mode = "internal";
};
port@3 {
reg = <3>;
label = "lan4";
phy-mode = "internal";
};
port@4 {
reg = <4>;
label = "lan5";
phy-mode = "internal";
};
port@5 {

View File

@ -28,12 +28,12 @@
&expgpio {
gpio-line-names = "BT_ON",
"WL_ON",
"",
"PWR_LED_OFF",
"GLOBAL_RESET",
"VDD_SD_IO_SEL",
"CAM_GPIO",
"GLOBAL_SHUTDOWN",
"SD_PWR_ON",
"SD_OC_N";
"SHUTDOWN_REQUEST";
};
&genet_mdio {

View File

@ -593,7 +593,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_atmel_conn>;
reg = <0x4a>;
reset-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */
reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* SODIMM 106 */
status = "disabled";
};
};

View File

@ -762,7 +762,7 @@
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-enable-ramp-delay = <150>;
regulator-enable-ramp-delay = <380>;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;

View File

@ -216,10 +216,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
no-1-8-v;
non-removable;
cap-sd-highspeed;
sd-uhs-ddr50;
mmc-ddr-1_8v;
vmmc-supply = <&reg_wifi>;
enable-sdio-wakeup;
status = "okay";

View File

@ -120,6 +120,7 @@
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
clock-names = "main_clk";
power-domains = <&pgc_hsic_phy>;
#phy-cells = <0>;
};
@ -1153,7 +1154,6 @@
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b30000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pgc_hsic_phy>;
clocks = <&clks IMX7D_USB_CTRL_CLK>;
fsl,usbphy = <&usbphynop3>;
fsl,usbmisc = <&usbmisc3 0>;

View File

@ -0,0 +1,105 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2022 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
/ {
firmware {
optee: optee {
compatible = "linaro,optee-tz";
method = "smc";
};
scmi: scmi {
compatible = "linaro,scmi-optee";
#address-cells = <1>;
#size-cells = <0>;
linaro,optee-channel-id = <0>;
shmem = <&scmi_shm>;
scmi_clk: protocol@14 {
reg = <0x14>;
#clock-cells = <1>;
};
scmi_reset: protocol@16 {
reg = <0x16>;
#reset-cells = <1>;
};
scmi_voltd: protocol@17 {
reg = <0x17>;
scmi_reguls: regulators {
#address-cells = <1>;
#size-cells = <0>;
scmi_reg11: reg11@0 {
reg = <0>;
regulator-name = "reg11";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
scmi_reg18: reg18@1 {
voltd-name = "reg18";
reg = <1>;
regulator-name = "reg18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
scmi_usb33: usb33@2 {
reg = <2>;
regulator-name = "usb33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
};
};
};
soc {
scmi_sram: sram@2ffff000 {
compatible = "mmio-sram";
reg = <0x2ffff000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2ffff000 0x1000>;
scmi_shm: scmi-sram@0 {
compatible = "arm,scmi-shmem";
reg = <0 0x80>;
};
};
};
};
&reg11 {
status = "disabled";
};
&reg18 {
status = "disabled";
};
&usb33 {
status = "disabled";
};
&usbotg_hs {
usb33d-supply = <&scmi_usb33>;
};
&usbphyc {
vdda1v1-supply = <&scmi_reg11>;
vdda1v8-supply = <&scmi_reg18>;
};
/delete-node/ &clk_hse;
/delete-node/ &clk_hsi;
/delete-node/ &clk_lse;
/delete-node/ &clk_lsi;
/delete-node/ &clk_csi;

View File

@ -115,33 +115,6 @@
status = "disabled";
};
firmware {
optee: optee {
compatible = "linaro,optee-tz";
method = "smc";
status = "disabled";
};
scmi: scmi {
compatible = "linaro,scmi-optee";
#address-cells = <1>;
#size-cells = <0>;
linaro,optee-channel-id = <0>;
shmem = <&scmi_shm>;
status = "disabled";
scmi_clk: protocol@14 {
reg = <0x14>;
#clock-cells = <1>;
};
scmi_reset: protocol@16 {
reg = <0x16>;
#reset-cells = <1>;
};
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
@ -149,20 +122,6 @@
interrupt-parent = <&intc>;
ranges;
scmi_sram: sram@2ffff000 {
compatible = "mmio-sram";
reg = <0x2ffff000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2ffff000 0x1000>;
scmi_shm: scmi-sram@0 {
compatible = "arm,scmi-shmem";
reg = <0 0x80>;
status = "disabled";
};
};
timers2: timer@40000000 {
#address-cells = <1>;
#size-cells = <0>;
@ -606,7 +565,7 @@
compatible = "st,stm32-cec";
reg = <0x40016000 0x400>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc CEC_K>, <&clk_lse>;
clocks = <&rcc CEC_K>, <&rcc CEC>;
clock-names = "cec", "hdmi-cec";
status = "disabled";
};
@ -1515,7 +1474,7 @@
usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
clocks = <&rcc USBH>, <&usbphyc>;
clocks = <&usbphyc>, <&rcc USBH>;
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -1524,7 +1483,7 @@
usbh_ehci: usb@5800d000 {
compatible = "generic-ehci";
reg = <0x5800d000 0x1000>;
clocks = <&rcc USBH>;
clocks = <&usbphyc>, <&rcc USBH>;
resets = <&rcc USBH_R>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
companion = <&usbh_ohci>;

View File

@ -7,6 +7,7 @@
/dts-v1/;
#include "stm32mp157a-dk1.dts"
#include "stm32mp15-scmi.dtsi"
/ {
model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
@ -28,6 +29,10 @@
clocks = <&scmi_clk CK_SCMI_MPU>;
};
&dsi {
clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
};
&gpioz {
clocks = <&scmi_clk CK_SCMI_GPIOZ>;
};
@ -54,10 +59,6 @@
resets = <&scmi_reset RST_SCMI_MCU>;
};
&optee {
status = "okay";
};
&rcc {
compatible = "st,stm32mp1-rcc-secure", "syscon";
clock-names = "hse", "hsi", "csi", "lse", "lsi";
@ -76,11 +77,3 @@
&rtc {
clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
};
&scmi {
status = "okay";
};
&scmi_shm {
status = "okay";
};

View File

@ -7,6 +7,7 @@
/dts-v1/;
#include "stm32mp157c-dk2.dts"
#include "stm32mp15-scmi.dtsi"
/ {
model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
@ -34,6 +35,7 @@
};
&dsi {
phy-dsi-supply = <&scmi_reg18>;
clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
};
@ -63,10 +65,6 @@
resets = <&scmi_reset RST_SCMI_MCU>;
};
&optee {
status = "okay";
};
&rcc {
compatible = "st,stm32mp1-rcc-secure", "syscon";
clock-names = "hse", "hsi", "csi", "lse", "lsi";
@ -85,11 +83,3 @@
&rtc {
clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
};
&scmi {
status = "okay";
};
&scmi_shm {
status = "okay";
};

View File

@ -7,6 +7,7 @@
/dts-v1/;
#include "stm32mp157c-ed1.dts"
#include "stm32mp15-scmi.dtsi"
/ {
model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
@ -33,6 +34,10 @@
resets = <&scmi_reset RST_SCMI_CRYP1>;
};
&dsi {
clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
};
&gpioz {
clocks = <&scmi_clk CK_SCMI_GPIOZ>;
};
@ -59,10 +64,6 @@
resets = <&scmi_reset RST_SCMI_MCU>;
};
&optee {
status = "okay";
};
&rcc {
compatible = "st,stm32mp1-rcc-secure", "syscon";
clock-names = "hse", "hsi", "csi", "lse", "lsi";
@ -81,11 +82,3 @@
&rtc {
clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
};
&scmi {
status = "okay";
};
&scmi_shm {
status = "okay";
};

View File

@ -7,6 +7,7 @@
/dts-v1/;
#include "stm32mp157c-ev1.dts"
#include "stm32mp15-scmi.dtsi"
/ {
model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
@ -35,6 +36,7 @@
};
&dsi {
phy-dsi-supply = <&scmi_reg18>;
clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
};
@ -68,10 +70,6 @@
resets = <&scmi_reset RST_SCMI_MCU>;
};
&optee {
status = "okay";
};
&rcc {
compatible = "st,stm32mp1-rcc-secure", "syscon";
clock-names = "hse", "hsi", "csi", "lse", "lsi";
@ -90,11 +88,3 @@
&rtc {
clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
};
&scmi {
status = "okay";
};
&scmi_shm {
status = "okay";
};

View File

@ -93,6 +93,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_MXSFB=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y

View File

@ -202,7 +202,7 @@ static const struct wakeup_source_info ws_info[] = {
static const struct of_device_id sama5d2_ws_ids[] = {
{ .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] },
{ .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] },
{ .compatible = "atmel,sama5d2-rtc", .data = &ws_info[1] },
{ .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] },
{ .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
{ .compatible = "usb-ohci", .data = &ws_info[2] },
@ -213,24 +213,24 @@ static const struct of_device_id sama5d2_ws_ids[] = {
};
static const struct of_device_id sam9x60_ws_ids[] = {
{ .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] },
{ .compatible = "microchip,sam9x60-rtc", .data = &ws_info[1] },
{ .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
{ .compatible = "usb-ohci", .data = &ws_info[2] },
{ .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
{ .compatible = "usb-ehci", .data = &ws_info[2] },
{ .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] },
{ .compatible = "microchip,sam9x60-rtt", .data = &ws_info[4] },
{ .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] },
{ /* sentinel */ }
};
static const struct of_device_id sama7g5_ws_ids[] = {
{ .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] },
{ .compatible = "microchip,sama7g5-rtc", .data = &ws_info[1] },
{ .compatible = "microchip,sama7g5-ohci", .data = &ws_info[2] },
{ .compatible = "usb-ohci", .data = &ws_info[2] },
{ .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
{ .compatible = "usb-ehci", .data = &ws_info[2] },
{ .compatible = "microchip,sama7g5-sdhci", .data = &ws_info[3] },
{ .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] },
{ .compatible = "microchip,sama7g5-rtt", .data = &ws_info[4] },
{ /* sentinel */ }
};
@ -1079,7 +1079,7 @@ securam_fail:
return ret;
}
static void at91_pm_secure_init(void)
static void __init at91_pm_secure_init(void)
{
int suspend_mode;
struct arm_smccc_res res;

View File

@ -39,6 +39,7 @@ static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle)
return -ENOENT;
syscon = of_iomap(syscon_np, 0);
of_node_put(syscon_np);
if (!syscon)
return -ENOMEM;

View File

@ -372,6 +372,7 @@ static void __init cns3xxx_init(void)
/* De-Asscer SATA Reset */
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
}
of_node_put(dn);
dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
if (of_device_is_available(dn)) {
@ -385,6 +386,7 @@ static void __init cns3xxx_init(void)
cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
}
of_node_put(dn);
pm_power_off = cns3xxx_power_off;

View File

@ -149,6 +149,7 @@ static void exynos_map_pmu(void)
np = of_find_matching_node(NULL, exynos_dt_pmu_match);
if (np)
pmu_base_addr = of_iomap(np, 0);
of_node_put(np);
}
static void __init exynos_init_irq(void)

View File

@ -71,6 +71,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
}
sram_base = of_iomap(node, 0);
of_node_put(node);
if (!sram_base) {
pr_err("Couldn't map SRAM registers\n");
return;
@ -91,6 +92,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
}
scu_base = of_iomap(node, 0);
of_node_put(node);
if (!scu_base) {
pr_err("Couldn't map SCU registers\n");
return;

View File

@ -218,13 +218,13 @@ void __init spear_setup_of_timer(void)
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
pr_err("%s: No irq passed for timer via DT\n", __func__);
return;
goto err_put_np;
}
gpt_base = of_iomap(np, 0);
if (!gpt_base) {
pr_err("%s: of iomap failed\n", __func__);
return;
goto err_put_np;
}
gpt_clk = clk_get_sys("gpt0", NULL);
@ -239,6 +239,8 @@ void __init spear_setup_of_timer(void)
goto err_prepare_enable_clk;
}
of_node_put(np);
spear_clockevent_init(irq);
spear_clocksource_init();
@ -248,4 +250,6 @@ err_prepare_enable_clk:
clk_put(gpt_clk);
err_iomap:
iounmap(gpt_base);
err_put_np:
of_node_put(np);
}

View File

@ -63,11 +63,12 @@ out:
unsigned long __pfn_to_mfn(unsigned long pfn)
{
struct rb_node *n = phys_to_mach.rb_node;
struct rb_node *n;
struct xen_p2m_entry *entry;
unsigned long irqflags;
read_lock_irqsave(&p2m_lock, irqflags);
n = phys_to_mach.rb_node;
while (n) {
entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
if (entry->pfn <= pfn &&
@ -152,10 +153,11 @@ bool __set_phys_to_machine_multi(unsigned long pfn,
int rc;
unsigned long irqflags;
struct xen_p2m_entry *p2m_entry;
struct rb_node *n = phys_to_mach.rb_node;
struct rb_node *n;
if (mfn == INVALID_P2M_ENTRY) {
write_lock_irqsave(&p2m_lock, irqflags);
n = phys_to_mach.rb_node;
while (n) {
p2m_entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
if (p2m_entry->pfn <= pfn &&

View File

@ -280,8 +280,8 @@
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_bus>;
clocks = <&cmu_peri CLK_GOUT_UART0_EXT_UCLK>,
<&cmu_peri CLK_GOUT_UART0_PCLK>;
clocks = <&cmu_peri CLK_GOUT_UART0_PCLK>,
<&cmu_peri CLK_GOUT_UART0_EXT_UCLK>;
clock-names = "uart", "clk_uart_baud0";
samsung,uart-fifosize = <64>;
status = "disabled";
@ -293,8 +293,8 @@
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart1_bus>;
clocks = <&cmu_peri CLK_GOUT_UART1_EXT_UCLK>,
<&cmu_peri CLK_GOUT_UART1_PCLK>;
clocks = <&cmu_peri CLK_GOUT_UART1_PCLK>,
<&cmu_peri CLK_GOUT_UART1_EXT_UCLK>;
clock-names = "uart", "clk_uart_baud0";
samsung,uart-fifosize = <256>;
status = "disabled";
@ -306,8 +306,8 @@
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_bus>;
clocks = <&cmu_peri CLK_GOUT_UART2_EXT_UCLK>,
<&cmu_peri CLK_GOUT_UART2_PCLK>;
clocks = <&cmu_peri CLK_GOUT_UART2_PCLK>,
<&cmu_peri CLK_GOUT_UART2_EXT_UCLK>;
clock-names = "uart", "clk_uart_baud0";
samsung,uart-fifosize = <256>;
status = "disabled";

View File

@ -395,41 +395,41 @@
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x10
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x2
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x2
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x10
>;
};
@ -461,28 +461,28 @@
pinctrl_gpio_led: gpioledgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x140
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
>;
};
pinctrl_i2c5: i2c5grp {
fsl,pins = <
MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c3
MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c3
MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c2
MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c2
>;
};
@ -500,20 +500,20 @@
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
>;
};
pinctrl_usb1_vbus: usb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x19
MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10
>;
};
@ -525,7 +525,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@ -537,7 +537,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@ -549,7 +549,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};

View File

@ -110,28 +110,28 @@
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x19
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x10
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x40
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x40
>;
};
@ -151,7 +151,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@ -163,13 +163,13 @@
pinctrl_reg_usb1: regusb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19
MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x10
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
};

View File

@ -116,48 +116,48 @@
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3
MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e2
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e2
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x49
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x49
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x40
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x40
>;
};
@ -175,7 +175,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@ -187,7 +187,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@ -199,7 +199,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
};

View File

@ -622,15 +622,15 @@
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000041 /* DIO0 */
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000041 /* DIO1 */
MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000041 /* M2SKT_OFF# */
MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000159 /* PCIE1_WDIS# */
MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000159 /* PCIE2_WDIS# */
MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000159 /* PCIE3_WDIS# */
MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000041 /* M2SKT_RST# */
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000159 /* M2SKT_WDIS# */
MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000159 /* M2SKT_GDIS# */
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */
MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_OFF# */
MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000150 /* PCIE1_WDIS# */
MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */
MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000150 /* M2SKT_GDIS# */
MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */
MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */
MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */
@ -639,47 +639,47 @@
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x159
MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x150
>;
};
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x141 /* RST# */
MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x159 /* IRQ# */
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x140 /* RST# */
MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x150 /* IRQ# */
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x141
MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x141
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x140
MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x140
>;
};
@ -692,61 +692,61 @@
pinctrl_gsc: gscgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x159
MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x150
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c2
MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c2
>;
};
pinctrl_ksz: kszgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x159 /* IRQ# */
MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x141 /* RST# */
MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x150 /* IRQ# */
MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x140 /* RST# */
>;
};
pinctrl_gpio_leds: ledgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x19
MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x19
MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x10
MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x10
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x141
MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x140
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x141
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x140
>;
};
@ -758,13 +758,13 @@
pinctrl_reg_usb2: regusb2grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x141
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x140
>;
};
pinctrl_reg_wifi: regwifigrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x119
MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x110
>;
};
@ -811,7 +811,7 @@
pinctrl_uart3_gpio: uart3gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x119
MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x110
>;
};

View File

@ -595,7 +595,7 @@
pgc_ispdwp: power-domain@18 {
#power-domain-cells = <0>;
reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
clocks = <&clk IMX8MP_CLK_MEDIA_ISP_DIV>;
clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
};
};
};

View File

@ -79,7 +79,7 @@
};
};
soc {
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;

View File

@ -74,7 +74,7 @@
vdd_l17_29-supply = <&vph_pwr>;
vdd_l20_21-supply = <&vph_pwr>;
vdd_l25-supply = <&pm8994_s5>;
vdd_lvs1_2 = <&pm8994_s4>;
vdd_lvs1_2-supply = <&pm8994_s4>;
/* S1, S2, S6 and S12 are managed by RPMPD */

View File

@ -171,7 +171,7 @@
vdd_l17_29-supply = <&vph_pwr>;
vdd_l20_21-supply = <&vph_pwr>;
vdd_l25-supply = <&pm8994_s5>;
vdd_lvs1_2 = <&pm8994_s4>;
vdd_lvs1_2-supply = <&pm8994_s4>;
/* S1, S2, S6 and S12 are managed by RPMPD */

View File

@ -100,7 +100,7 @@
CPU6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};
@ -108,7 +108,7 @@
CPU7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};

View File

@ -5,7 +5,7 @@
* Copyright 2021 Google LLC.
*/
#include "sc7180-trogdor.dtsi"
/* This file must be included after sc7180-trogdor.dtsi */
/ {
/* BOARD-SPECIFIC TOP LEVEL NODES */

View File

@ -5,7 +5,7 @@
* Copyright 2020 Google LLC.
*/
#include "sc7180-trogdor.dtsi"
/* This file must be included after sc7180-trogdor.dtsi */
&ap_sar_sensor {
semtech,cs0-ground;

View File

@ -4244,7 +4244,7 @@
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface", "core";

View File

@ -2853,6 +2853,16 @@
reg = <0x0 0x17100000 0x0 0x10000>, /* GICD */
<0x0 0x17180000 0x0 0x200000>; /* GICR * 8 */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
gic_its: msi-controller@17140000 {
compatible = "arm,gic-v3-its";
reg = <0x0 0x17140000 0x0 0x20000>;
msi-controller;
#msi-cells = <1>;
};
};
timer@17420000 {
@ -3037,8 +3047,8 @@
iommus = <&apps_smmu 0xe0 0x0>;
interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
interconnect-names = "ufs-ddr", "cpu-ufs";
clock-names =
"core_clk",

View File

@ -456,13 +456,11 @@
clock-names = "clk_ahb", "clk_xin";
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
ti,otap-del-sel-ddr52 = <0x6>;
ti,otap-del-sel-hs200 = <0x7>;
ti,otap-del-sel-hs400 = <0x4>;
};
sdhci1: mmc@fa00000 {

View File

@ -33,7 +33,7 @@
ranges;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */
reg = <0x00 0x01800000 0x00 0x100000>, /* GICD */
<0x00 0x01900000 0x00 0x100000>, /* GICR */
<0x00 0x6f000000 0x00 0x2000>, /* GICC */
<0x00 0x6f010000 0x00 0x1000>, /* GICH */

View File

@ -362,11 +362,6 @@ struct kvm_vcpu_arch {
struct arch_timer_cpu timer_cpu;
struct kvm_pmu pmu;
/*
* Anything that is not used directly from assembly code goes
* here.
*/
/*
* Guest registers we preserve during guest debugging.
*

View File

@ -113,6 +113,9 @@ static __always_inline bool has_vhe(void)
/*
* Code only run in VHE/NVHE hyp context can assume VHE is present or
* absent. Otherwise fall back to caps.
* This allows the compiler to discard VHE-specific code from the
* nVHE object, reducing the number of external symbol references
* needed to link.
*/
if (is_vhe_hyp_code())
return true;

View File

@ -1974,15 +1974,7 @@ static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
#ifdef CONFIG_KVM
static bool is_kvm_protected_mode(const struct arm64_cpu_capabilities *entry, int __unused)
{
if (kvm_get_mode() != KVM_MODE_PROTECTED)
return false;
if (is_kernel_in_hyp_mode()) {
pr_warn("Protected KVM not available with VHE\n");
return false;
}
return true;
return kvm_get_mode() == KVM_MODE_PROTECTED;
}
#endif /* CONFIG_KVM */
@ -3109,7 +3101,6 @@ void cpu_set_feature(unsigned int num)
WARN_ON(num >= MAX_CPU_FEATURES);
elf_hwcap |= BIT(num);
}
EXPORT_SYMBOL_GPL(cpu_set_feature);
bool cpu_have_feature(unsigned int num)
{

View File

@ -102,7 +102,6 @@ SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
* x19-x29 per the AAPCS, and we created frame records upon entry, so we need
* to restore x0-x8, x29, and x30.
*/
ftrace_common_return:
/* Restore function arguments */
ldp x0, x1, [sp]
ldp x2, x3, [sp, #S_X2]

View File

@ -77,6 +77,66 @@ static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr)
return NULL;
}
/*
* Find the address the callsite must branch to in order to reach '*addr'.
*
* Due to the limited range of 'BL' instructions, modules may be placed too far
* away to branch directly and must use a PLT.
*
* Returns true when '*addr' contains a reachable target address, or has been
* modified to contain a PLT address. Returns false otherwise.
*/
static bool ftrace_find_callable_addr(struct dyn_ftrace *rec,
struct module *mod,
unsigned long *addr)
{
unsigned long pc = rec->ip;
long offset = (long)*addr - (long)pc;
struct plt_entry *plt;
/*
* When the target is within range of the 'BL' instruction, use 'addr'
* as-is and branch to that directly.
*/
if (offset >= -SZ_128M && offset < SZ_128M)
return true;
/*
* When the target is outside of the range of a 'BL' instruction, we
* must use a PLT to reach it. We can only place PLTs for modules, and
* only when module PLT support is built-in.
*/
if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
return false;
/*
* 'mod' is only set at module load time, but if we end up
* dealing with an out-of-range condition, we can assume it
* is due to a module being loaded far away from the kernel.
*
* NOTE: __module_text_address() must be called with preemption
* disabled, but we can rely on ftrace_lock to ensure that 'mod'
* retains its validity throughout the remainder of this code.
*/
if (!mod) {
preempt_disable();
mod = __module_text_address(pc);
preempt_enable();
}
if (WARN_ON(!mod))
return false;
plt = get_ftrace_plt(mod, *addr);
if (!plt) {
pr_err("ftrace: no module PLT for %ps\n", (void *)*addr);
return false;
}
*addr = (unsigned long)plt;
return true;
}
/*
* Turn on the call to ftrace_caller() in instrumented function
*/
@ -84,40 +144,9 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long pc = rec->ip;
u32 old, new;
long offset = (long)pc - (long)addr;
if (offset < -SZ_128M || offset >= SZ_128M) {
struct module *mod;
struct plt_entry *plt;
if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
return -EINVAL;
/*
* On kernels that support module PLTs, the offset between the
* branch instruction and its target may legally exceed the
* range of an ordinary relative 'bl' opcode. In this case, we
* need to branch via a trampoline in the module.
*
* NOTE: __module_text_address() must be called with preemption
* disabled, but we can rely on ftrace_lock to ensure that 'mod'
* retains its validity throughout the remainder of this code.
*/
preempt_disable();
mod = __module_text_address(pc);
preempt_enable();
if (WARN_ON(!mod))
return -EINVAL;
plt = get_ftrace_plt(mod, addr);
if (!plt) {
pr_err("ftrace: no module PLT for %ps\n", (void *)addr);
return -EINVAL;
}
addr = (unsigned long)plt;
}
if (!ftrace_find_callable_addr(rec, NULL, &addr))
return -EINVAL;
old = aarch64_insn_gen_nop();
new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
@ -132,6 +161,11 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
unsigned long pc = rec->ip;
u32 old, new;
if (!ftrace_find_callable_addr(rec, NULL, &old_addr))
return -EINVAL;
if (!ftrace_find_callable_addr(rec, NULL, &addr))
return -EINVAL;
old = aarch64_insn_gen_branch_imm(pc, old_addr,
AARCH64_INSN_BRANCH_LINK);
new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
@ -181,54 +215,15 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
unsigned long addr)
{
unsigned long pc = rec->ip;
bool validate = true;
u32 old = 0, new;
long offset = (long)pc - (long)addr;
if (offset < -SZ_128M || offset >= SZ_128M) {
u32 replaced;
if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS))
return -EINVAL;
/*
* 'mod' is only set at module load time, but if we end up
* dealing with an out-of-range condition, we can assume it
* is due to a module being loaded far away from the kernel.
*/
if (!mod) {
preempt_disable();
mod = __module_text_address(pc);
preempt_enable();
if (WARN_ON(!mod))
return -EINVAL;
}
/*
* The instruction we are about to patch may be a branch and
* link instruction that was redirected via a PLT entry. In
* this case, the normal validation will fail, but we can at
* least check that we are dealing with a branch and link
* instruction that points into the right module.
*/
if (aarch64_insn_read((void *)pc, &replaced))
return -EFAULT;
if (!aarch64_insn_is_bl(replaced) ||
!within_module(pc + aarch64_get_branch_offset(replaced),
mod))
return -EINVAL;
validate = false;
} else {
old = aarch64_insn_gen_branch_imm(pc, addr,
AARCH64_INSN_BRANCH_LINK);
}
if (!ftrace_find_callable_addr(rec, mod, &addr))
return -EINVAL;
old = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
new = aarch64_insn_gen_nop();
return ftrace_modify_code(pc, old, new, validate);
return ftrace_modify_code(pc, old, new, true);
}
void arch_ftrace_update_code(int command)

View File

@ -303,14 +303,13 @@ void __init __no_sanitize_address setup_arch(char **cmdline_p)
early_fixmap_init();
early_ioremap_init();
/*
* Initialise the static keys early as they may be enabled by the
* cpufeature code, early parameters, and DT setup.
*/
jump_label_init();
setup_machine_fdt(__fdt_pointer);
/*
* Initialise the static keys early as they may be enabled by the
* cpufeature code and early parameters.
*/
jump_label_init();
parse_early_param();
/*

View File

@ -1230,6 +1230,9 @@ bool kvm_arch_timer_get_input_level(int vintid)
struct kvm_vcpu *vcpu = kvm_get_running_vcpu();
struct arch_timer_context *timer;
if (WARN(!vcpu, "No vcpu context!\n"))
return false;
if (vintid == vcpu_vtimer(vcpu)->irq.irq)
timer = vcpu_vtimer(vcpu);
else if (vintid == vcpu_ptimer(vcpu)->irq.irq)

View File

@ -150,8 +150,10 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
if (ret)
goto out_free_stage2_pgd;
if (!zalloc_cpumask_var(&kvm->arch.supported_cpus, GFP_KERNEL))
if (!zalloc_cpumask_var(&kvm->arch.supported_cpus, GFP_KERNEL)) {
ret = -ENOMEM;
goto out_free_stage2_pgd;
}
cpumask_copy(kvm->arch.supported_cpus, cpu_possible_mask);
kvm_vgic_early_init(kvm);
@ -2110,11 +2112,11 @@ static int finalize_hyp_mode(void)
return 0;
/*
* Exclude HYP BSS from kmemleak so that it doesn't get peeked
* at, which would end badly once the section is inaccessible.
* None of other sections should ever be introspected.
* Exclude HYP sections from kmemleak so that they don't get peeked
* at, which would end badly once inaccessible.
*/
kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start);
kmemleak_free_part(__va(hyp_mem_base), hyp_mem_size);
return pkvm_drop_host_privileges();
}
@ -2271,7 +2273,11 @@ static int __init early_kvm_mode_cfg(char *arg)
return -EINVAL;
if (strcmp(arg, "protected") == 0) {
kvm_mode = KVM_MODE_PROTECTED;
if (!is_kernel_in_hyp_mode())
kvm_mode = KVM_MODE_PROTECTED;
else
pr_warn_once("Protected KVM not available with VHE\n");
return 0;
}

View File

@ -80,6 +80,7 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
vcpu->arch.flags &= ~KVM_ARM64_FP_ENABLED;
vcpu->arch.flags |= KVM_ARM64_FP_HOST;
vcpu->arch.flags &= ~KVM_ARM64_HOST_SVE_ENABLED;
if (read_sysreg(cpacr_el1) & CPACR_EL1_ZEN_EL0EN)
vcpu->arch.flags |= KVM_ARM64_HOST_SVE_ENABLED;
@ -93,6 +94,7 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
* operations. Do this for ZA as well for now for simplicity.
*/
if (system_supports_sme()) {
vcpu->arch.flags &= ~KVM_ARM64_HOST_SME_ENABLED;
if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN)
vcpu->arch.flags |= KVM_ARM64_HOST_SME_ENABLED;

View File

@ -314,15 +314,11 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
int host_stage2_idmap_locked(phys_addr_t addr, u64 size,
enum kvm_pgtable_prot prot)
{
hyp_assert_lock_held(&host_kvm.lock);
return host_stage2_try(__host_stage2_idmap, addr, addr + size, prot);
}
int host_stage2_set_owner_locked(phys_addr_t addr, u64 size, u8 owner_id)
{
hyp_assert_lock_held(&host_kvm.lock);
return host_stage2_try(kvm_pgtable_stage2_set_owner, &host_kvm.pgt,
addr, size, &host_s2_pool, owner_id);
}

View File

@ -243,15 +243,9 @@ u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id)
case SYS_ID_AA64MMFR2_EL1:
return get_pvm_id_aa64mmfr2(vcpu);
default:
/*
* Should never happen because all cases are covered in
* pvm_sys_reg_descs[].
*/
WARN_ON(1);
break;
/* Unhandled ID register, RAZ */
return 0;
}
return 0;
}
static u64 read_id_reg(const struct kvm_vcpu *vcpu,
@ -332,6 +326,16 @@ static bool pvm_gic_read_sre(struct kvm_vcpu *vcpu,
/* Mark the specified system register as an AArch64 feature id register. */
#define AARCH64(REG) { SYS_DESC(REG), .access = pvm_access_id_aarch64 }
/*
* sys_reg_desc initialiser for architecturally unallocated cpufeature ID
* register with encoding Op0=3, Op1=0, CRn=0, CRm=crm, Op2=op2
* (1 <= crm < 8, 0 <= Op2 < 8).
*/
#define ID_UNALLOCATED(crm, op2) { \
Op0(3), Op1(0), CRn(0), CRm(crm), Op2(op2), \
.access = pvm_access_id_aarch64, \
}
/* Mark the specified system register as Read-As-Zero/Write-Ignored */
#define RAZ_WI(REG) { SYS_DESC(REG), .access = pvm_access_raz_wi }
@ -375,24 +379,46 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = {
AARCH32(SYS_MVFR0_EL1),
AARCH32(SYS_MVFR1_EL1),
AARCH32(SYS_MVFR2_EL1),
ID_UNALLOCATED(3,3),
AARCH32(SYS_ID_PFR2_EL1),
AARCH32(SYS_ID_DFR1_EL1),
AARCH32(SYS_ID_MMFR5_EL1),
ID_UNALLOCATED(3,7),
/* AArch64 ID registers */
/* CRm=4 */
AARCH64(SYS_ID_AA64PFR0_EL1),
AARCH64(SYS_ID_AA64PFR1_EL1),
ID_UNALLOCATED(4,2),
ID_UNALLOCATED(4,3),
AARCH64(SYS_ID_AA64ZFR0_EL1),
ID_UNALLOCATED(4,5),
ID_UNALLOCATED(4,6),
ID_UNALLOCATED(4,7),
AARCH64(SYS_ID_AA64DFR0_EL1),
AARCH64(SYS_ID_AA64DFR1_EL1),
ID_UNALLOCATED(5,2),
ID_UNALLOCATED(5,3),
AARCH64(SYS_ID_AA64AFR0_EL1),
AARCH64(SYS_ID_AA64AFR1_EL1),
ID_UNALLOCATED(5,6),
ID_UNALLOCATED(5,7),
AARCH64(SYS_ID_AA64ISAR0_EL1),
AARCH64(SYS_ID_AA64ISAR1_EL1),
AARCH64(SYS_ID_AA64ISAR2_EL1),
ID_UNALLOCATED(6,3),
ID_UNALLOCATED(6,4),
ID_UNALLOCATED(6,5),
ID_UNALLOCATED(6,6),
ID_UNALLOCATED(6,7),
AARCH64(SYS_ID_AA64MMFR0_EL1),
AARCH64(SYS_ID_AA64MMFR1_EL1),
AARCH64(SYS_ID_AA64MMFR2_EL1),
ID_UNALLOCATED(7,3),
ID_UNALLOCATED(7,4),
ID_UNALLOCATED(7,5),
ID_UNALLOCATED(7,6),
ID_UNALLOCATED(7,7),
/* Scalable Vector Registers are restricted. */

View File

@ -429,11 +429,11 @@ static const struct vgic_register_region vgic_v2_dist_registers[] = {
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_SET,
vgic_mmio_read_pending, vgic_mmio_write_spending,
NULL, vgic_uaccess_write_spending, 1,
vgic_uaccess_read_pending, vgic_uaccess_write_spending, 1,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_CLEAR,
vgic_mmio_read_pending, vgic_mmio_write_cpending,
NULL, vgic_uaccess_write_cpending, 1,
vgic_uaccess_read_pending, vgic_uaccess_write_cpending, 1,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_SET,
vgic_mmio_read_active, vgic_mmio_write_sactive,

View File

@ -353,42 +353,6 @@ static unsigned long vgic_mmio_read_v3_idregs(struct kvm_vcpu *vcpu,
return 0;
}
static unsigned long vgic_v3_uaccess_read_pending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len)
{
u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
u32 value = 0;
int i;
/*
* pending state of interrupt is latched in pending_latch variable.
* Userspace will save and restore pending state and line_level
* separately.
* Refer to Documentation/virt/kvm/devices/arm-vgic-v3.rst
* for handling of ISPENDR and ICPENDR.
*/
for (i = 0; i < len * 8; i++) {
struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
bool state = irq->pending_latch;
if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
int err;
err = irq_get_irqchip_state(irq->host_irq,
IRQCHIP_STATE_PENDING,
&state);
WARN_ON(err);
}
if (state)
value |= (1U << i);
vgic_put_irq(vcpu->kvm, irq);
}
return value;
}
static int vgic_v3_uaccess_write_pending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len,
unsigned long val)
@ -666,7 +630,7 @@ static const struct vgic_register_region vgic_v3_dist_registers[] = {
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISPENDR,
vgic_mmio_read_pending, vgic_mmio_write_spending,
vgic_v3_uaccess_read_pending, vgic_v3_uaccess_write_pending, 1,
vgic_uaccess_read_pending, vgic_v3_uaccess_write_pending, 1,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICPENDR,
vgic_mmio_read_pending, vgic_mmio_write_cpending,
@ -750,7 +714,7 @@ static const struct vgic_register_region vgic_v3_rd_registers[] = {
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISPENDR0,
vgic_mmio_read_pending, vgic_mmio_write_spending,
vgic_v3_uaccess_read_pending, vgic_v3_uaccess_write_pending, 4,
vgic_uaccess_read_pending, vgic_v3_uaccess_write_pending, 4,
VGIC_ACCESS_32bit),
REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ICPENDR0,
vgic_mmio_read_pending, vgic_mmio_write_cpending,

View File

@ -226,8 +226,9 @@ int vgic_uaccess_write_cenable(struct kvm_vcpu *vcpu,
return 0;
}
unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len)
static unsigned long __read_pending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len,
bool is_user)
{
u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
u32 value = 0;
@ -239,6 +240,15 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
unsigned long flags;
bool val;
/*
* When used from userspace with a GICv3 model:
*
* Pending state of interrupt is latched in pending_latch
* variable. Userspace will save and restore pending state
* and line_level separately.
* Refer to Documentation/virt/kvm/devices/arm-vgic-v3.rst
* for handling of ISPENDR and ICPENDR.
*/
raw_spin_lock_irqsave(&irq->irq_lock, flags);
if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
int err;
@ -248,10 +258,20 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
IRQCHIP_STATE_PENDING,
&val);
WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
} else if (vgic_irq_is_mapped_level(irq)) {
} else if (!is_user && vgic_irq_is_mapped_level(irq)) {
val = vgic_get_phys_line_level(irq);
} else {
val = irq_is_pending(irq);
switch (vcpu->kvm->arch.vgic.vgic_model) {
case KVM_DEV_TYPE_ARM_VGIC_V3:
if (is_user) {
val = irq->pending_latch;
break;
}
fallthrough;
default:
val = irq_is_pending(irq);
break;
}
}
value |= ((u32)val << i);
@ -263,6 +283,18 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
return value;
}
unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len)
{
return __read_pending(vcpu, addr, len, false);
}
unsigned long vgic_uaccess_read_pending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len)
{
return __read_pending(vcpu, addr, len, true);
}
static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
{
return (vgic_irq_is_sgi(irq->intid) &&

View File

@ -149,6 +149,9 @@ int vgic_uaccess_write_cenable(struct kvm_vcpu *vcpu,
unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len);
unsigned long vgic_uaccess_read_pending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len);
void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len,
unsigned long val);

Some files were not shown because too many files have changed in this diff Show More