mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-09-21 20:22:13 +08:00
pata_legacy: resychronize with upstream changes and resubmit
Update the legacy driver so it can handle VLB ports nicely, and has an internal structure for nailing new ISA/VLB forms in. Anyone got an ALI14xx and a spare day ;) Also adds an "all" parameter so you can load this driver after all the PCI ones in a boot time kernel and tell it to grab anything ST412 compatible even if it is an unknown PCI device. That allows libata to offer the same "just get me a disk somehow" fallback that old IDE did. Obsoletes pata_qdi. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Alan Cox
Jeff Garzik
parent
c294f1b329
commit
defc9cd826
@ -68,8 +68,9 @@
|
|||||||
|
|
||||||
#define NR_HOST 6
|
#define NR_HOST 6
|
||||||
|
|
||||||
static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
|
static int all;
|
||||||
static int legacy_irq[NR_HOST] = { 14, 15, 11, 10, 8, 12 };
|
module_param(all, int, 0444);
|
||||||
|
MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
|
||||||
|
|
||||||
struct legacy_data {
|
struct legacy_data {
|
||||||
unsigned long timing;
|
unsigned long timing;
|
||||||
@ -80,20 +81,102 @@ struct legacy_data {
|
|||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
|
enum controller {
|
||||||
|
BIOS = 0,
|
||||||
|
SNOOP = 1,
|
||||||
|
PDC20230 = 2,
|
||||||
|
HT6560A = 3,
|
||||||
|
HT6560B = 4,
|
||||||
|
OPTI611A = 5,
|
||||||
|
OPTI46X = 6,
|
||||||
|
QDI6500 = 7,
|
||||||
|
QDI6580 = 8,
|
||||||
|
QDI6580DP = 9, /* Dual channel mode is different */
|
||||||
|
|
||||||
|
UNKNOWN = -1
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
struct legacy_probe {
|
||||||
|
unsigned char *name;
|
||||||
|
unsigned long port;
|
||||||
|
unsigned int irq;
|
||||||
|
unsigned int slot;
|
||||||
|
enum controller type;
|
||||||
|
unsigned long private;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct legacy_controller {
|
||||||
|
const char *name;
|
||||||
|
struct ata_port_operations *ops;
|
||||||
|
unsigned int pio_mask;
|
||||||
|
unsigned int flags;
|
||||||
|
int (*setup)(struct legacy_probe *probe, struct legacy_data *data);
|
||||||
|
};
|
||||||
|
|
||||||
|
static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
|
||||||
|
|
||||||
|
static struct legacy_probe probe_list[NR_HOST];
|
||||||
static struct legacy_data legacy_data[NR_HOST];
|
static struct legacy_data legacy_data[NR_HOST];
|
||||||
static struct ata_host *legacy_host[NR_HOST];
|
static struct ata_host *legacy_host[NR_HOST];
|
||||||
static int nr_legacy_host;
|
static int nr_legacy_host;
|
||||||
|
|
||||||
|
|
||||||
static int probe_all; /* Set to check all ISA port ranges */
|
static int probe_all; /* Set to check all ISA port ranges */
|
||||||
static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */
|
static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */
|
||||||
static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */
|
static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
|
||||||
static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */
|
static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
|
||||||
static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
|
static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
|
||||||
static int autospeed; /* Chip present which snoops speed changes */
|
static int qdi; /* Set to probe QDI controllers */
|
||||||
static int pio_mask = 0x1F; /* PIO range for autospeed devices */
|
static int autospeed; /* Chip present which snoops speed changes */
|
||||||
|
static int pio_mask = 0x1F; /* PIO range for autospeed devices */
|
||||||
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
|
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* legacy_probe_add - Add interface to probe list
|
||||||
|
* @port: Controller port
|
||||||
|
* @irq: IRQ number
|
||||||
|
* @type: Controller type
|
||||||
|
* @private: Controller specific info
|
||||||
|
*
|
||||||
|
* Add an entry into the probe list for ATA controllers. This is used
|
||||||
|
* to add the default ISA slots and then to build up the table
|
||||||
|
* further according to other ISA/VLB/Weird device scans
|
||||||
|
*
|
||||||
|
* An I/O port list is used to keep ordering stable and sane, as we
|
||||||
|
* don't have any good way to talk about ordering otherwise
|
||||||
|
*/
|
||||||
|
|
||||||
|
static int legacy_probe_add(unsigned long port, unsigned int irq,
|
||||||
|
enum controller type, unsigned long private)
|
||||||
|
{
|
||||||
|
struct legacy_probe *lp = &probe_list[0];
|
||||||
|
int i;
|
||||||
|
struct legacy_probe *free = NULL;
|
||||||
|
|
||||||
|
for (i = 0; i < NR_HOST; i++) {
|
||||||
|
if (lp->port == 0 && free == NULL)
|
||||||
|
free = lp;
|
||||||
|
/* Matching port, or the correct slot for ordering */
|
||||||
|
if (lp->port == port || legacy_port[i] == port) {
|
||||||
|
free = lp;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
lp++;
|
||||||
|
}
|
||||||
|
if (free == NULL) {
|
||||||
|
printk(KERN_ERR "pata_legacy: Too many interfaces.\n");
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
/* Fill in the entry for later probing */
|
||||||
|
free->port = port;
|
||||||
|
free->irq = irq;
|
||||||
|
free->type = type;
|
||||||
|
free->private = private;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* legacy_set_mode - mode setting
|
* legacy_set_mode - mode setting
|
||||||
* @link: IDE link
|
* @link: IDE link
|
||||||
@ -113,7 +196,8 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused)
|
|||||||
|
|
||||||
ata_link_for_each_dev(dev, link) {
|
ata_link_for_each_dev(dev, link) {
|
||||||
if (ata_dev_enabled(dev)) {
|
if (ata_dev_enabled(dev)) {
|
||||||
ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
|
ata_dev_printk(dev, KERN_INFO,
|
||||||
|
"configured for PIO\n");
|
||||||
dev->pio_mode = XFER_PIO_0;
|
dev->pio_mode = XFER_PIO_0;
|
||||||
dev->xfer_mode = XFER_PIO_0;
|
dev->xfer_mode = XFER_PIO_0;
|
||||||
dev->xfer_shift = ATA_SHIFT_PIO;
|
dev->xfer_shift = ATA_SHIFT_PIO;
|
||||||
@ -171,7 +255,7 @@ static struct ata_port_operations simple_port_ops = {
|
|||||||
.irq_clear = ata_bmdma_irq_clear,
|
.irq_clear = ata_bmdma_irq_clear,
|
||||||
.irq_on = ata_irq_on,
|
.irq_on = ata_irq_on,
|
||||||
|
|
||||||
.port_start = ata_port_start,
|
.port_start = ata_sff_port_start,
|
||||||
};
|
};
|
||||||
|
|
||||||
static struct ata_port_operations legacy_port_ops = {
|
static struct ata_port_operations legacy_port_ops = {
|
||||||
@ -198,15 +282,16 @@ static struct ata_port_operations legacy_port_ops = {
|
|||||||
.irq_clear = ata_bmdma_irq_clear,
|
.irq_clear = ata_bmdma_irq_clear,
|
||||||
.irq_on = ata_irq_on,
|
.irq_on = ata_irq_on,
|
||||||
|
|
||||||
.port_start = ata_port_start,
|
.port_start = ata_sff_port_start,
|
||||||
};
|
};
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Promise 20230C and 20620 support
|
* Promise 20230C and 20620 support
|
||||||
*
|
*
|
||||||
* This controller supports PIO0 to PIO2. We set PIO timings conservatively to
|
* This controller supports PIO0 to PIO2. We set PIO timings
|
||||||
* allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to
|
* conservatively to allow for 50MHz Vesa Local Bus. The 20620 DMA
|
||||||
* controller and PIO'd to the host and not supported.
|
* support is weird being DMA to controller and PIO'd to the host
|
||||||
|
* and not supported.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||||
@ -221,8 +306,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|||||||
local_irq_save(flags);
|
local_irq_save(flags);
|
||||||
|
|
||||||
/* Unlock the control interface */
|
/* Unlock the control interface */
|
||||||
do
|
do {
|
||||||
{
|
|
||||||
inb(0x1F5);
|
inb(0x1F5);
|
||||||
outb(inb(0x1F2) | 0x80, 0x1F2);
|
outb(inb(0x1F2) | 0x80, 0x1F2);
|
||||||
inb(0x1F2);
|
inb(0x1F2);
|
||||||
@ -231,7 +315,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|||||||
inb(0x1F2);
|
inb(0x1F2);
|
||||||
inb(0x1F2);
|
inb(0x1F2);
|
||||||
}
|
}
|
||||||
while((inb(0x1F2) & 0x80) && --tries);
|
while ((inb(0x1F2) & 0x80) && --tries);
|
||||||
|
|
||||||
local_irq_restore(flags);
|
local_irq_restore(flags);
|
||||||
|
|
||||||
@ -250,7 +334,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|||||||
}
|
}
|
||||||
|
|
||||||
static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
|
static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
|
||||||
unsigned char *buf, unsigned int buflen, int rw)
|
unsigned char *buf, unsigned int buflen, int rw)
|
||||||
{
|
{
|
||||||
if (ata_id_has_dword_io(dev->id)) {
|
if (ata_id_has_dword_io(dev->id)) {
|
||||||
struct ata_port *ap = dev->link->ap;
|
struct ata_port *ap = dev->link->ap;
|
||||||
@ -312,14 +396,14 @@ static struct ata_port_operations pdc20230_port_ops = {
|
|||||||
.irq_clear = ata_bmdma_irq_clear,
|
.irq_clear = ata_bmdma_irq_clear,
|
||||||
.irq_on = ata_irq_on,
|
.irq_on = ata_irq_on,
|
||||||
|
|
||||||
.port_start = ata_port_start,
|
.port_start = ata_sff_port_start,
|
||||||
};
|
};
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Holtek 6560A support
|
* Holtek 6560A support
|
||||||
*
|
*
|
||||||
* This controller supports PIO0 to PIO2 (no IORDY even though higher timings
|
* This controller supports PIO0 to PIO2 (no IORDY even though higher
|
||||||
* can be loaded).
|
* timings can be loaded).
|
||||||
*/
|
*/
|
||||||
|
|
||||||
static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||||
@ -366,14 +450,14 @@ static struct ata_port_operations ht6560a_port_ops = {
|
|||||||
.irq_clear = ata_bmdma_irq_clear,
|
.irq_clear = ata_bmdma_irq_clear,
|
||||||
.irq_on = ata_irq_on,
|
.irq_on = ata_irq_on,
|
||||||
|
|
||||||
.port_start = ata_port_start,
|
.port_start = ata_sff_port_start,
|
||||||
};
|
};
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Holtek 6560B support
|
* Holtek 6560B support
|
||||||
*
|
*
|
||||||
* This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting
|
* This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO
|
||||||
* unless we see an ATAPI device in which case we force it off.
|
* setting unless we see an ATAPI device in which case we force it off.
|
||||||
*
|
*
|
||||||
* FIXME: need to implement 2nd channel support.
|
* FIXME: need to implement 2nd channel support.
|
||||||
*/
|
*/
|
||||||
@ -400,7 +484,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|||||||
if (adev->class != ATA_DEV_ATA) {
|
if (adev->class != ATA_DEV_ATA) {
|
||||||
u8 rconf = inb(0x3E6);
|
u8 rconf = inb(0x3E6);
|
||||||
if (rconf & 0x24) {
|
if (rconf & 0x24) {
|
||||||
rconf &= ~ 0x24;
|
rconf &= ~0x24;
|
||||||
outb(rconf, 0x3E6);
|
outb(rconf, 0x3E6);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
@ -425,13 +509,13 @@ static struct ata_port_operations ht6560b_port_ops = {
|
|||||||
.qc_prep = ata_qc_prep,
|
.qc_prep = ata_qc_prep,
|
||||||
.qc_issue = ata_qc_issue_prot,
|
.qc_issue = ata_qc_issue_prot,
|
||||||
|
|
||||||
.data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
|
.data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
|
||||||
|
|
||||||
.irq_handler = ata_interrupt,
|
.irq_handler = ata_interrupt,
|
||||||
.irq_clear = ata_bmdma_irq_clear,
|
.irq_clear = ata_bmdma_irq_clear,
|
||||||
.irq_on = ata_irq_on,
|
.irq_on = ata_irq_on,
|
||||||
|
|
||||||
.port_start = ata_port_start,
|
.port_start = ata_sff_port_start,
|
||||||
};
|
};
|
||||||
|
|
||||||
/*
|
/*
|
||||||
@ -464,7 +548,8 @@ static u8 opti_syscfg(u8 reg)
|
|||||||
* This controller supports PIO0 to PIO3.
|
* This controller supports PIO0 to PIO3.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
static void opti82c611a_set_piomode(struct ata_port *ap,
|
||||||
|
struct ata_device *adev)
|
||||||
{
|
{
|
||||||
u8 active, recover, setup;
|
u8 active, recover, setup;
|
||||||
struct ata_timing t;
|
struct ata_timing t;
|
||||||
@ -551,7 +636,7 @@ static struct ata_port_operations opti82c611a_port_ops = {
|
|||||||
.irq_clear = ata_bmdma_irq_clear,
|
.irq_clear = ata_bmdma_irq_clear,
|
||||||
.irq_on = ata_irq_on,
|
.irq_on = ata_irq_on,
|
||||||
|
|
||||||
.port_start = ata_port_start,
|
.port_start = ata_sff_port_start,
|
||||||
};
|
};
|
||||||
|
|
||||||
/*
|
/*
|
||||||
@ -683,77 +768,282 @@ static struct ata_port_operations opti82c46x_port_ops = {
|
|||||||
.irq_clear = ata_bmdma_irq_clear,
|
.irq_clear = ata_bmdma_irq_clear,
|
||||||
.irq_on = ata_irq_on,
|
.irq_on = ata_irq_on,
|
||||||
|
|
||||||
.port_start = ata_port_start,
|
.port_start = ata_sff_port_start,
|
||||||
};
|
};
|
||||||
|
|
||||||
|
static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||||
|
{
|
||||||
|
struct ata_timing t;
|
||||||
|
struct legacy_data *qdi = ap->host->private_data;
|
||||||
|
int active, recovery;
|
||||||
|
u8 timing;
|
||||||
|
|
||||||
|
/* Get the timing data in cycles */
|
||||||
|
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
|
||||||
|
|
||||||
|
if (qdi->fast) {
|
||||||
|
active = 8 - FIT(t.active, 1, 8);
|
||||||
|
recovery = 18 - FIT(t.recover, 3, 18);
|
||||||
|
} else {
|
||||||
|
active = 9 - FIT(t.active, 2, 9);
|
||||||
|
recovery = 15 - FIT(t.recover, 0, 15);
|
||||||
|
}
|
||||||
|
timing = (recovery << 4) | active | 0x08;
|
||||||
|
|
||||||
|
qdi->clock[adev->devno] = timing;
|
||||||
|
|
||||||
|
outb(timing, qdi->timing);
|
||||||
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* legacy_init_one - attach a legacy interface
|
* qdi6580dp_set_piomode - PIO setup for dual channel
|
||||||
* @port: port number
|
* @ap: Port
|
||||||
* @io: I/O port start
|
* @adev: Device
|
||||||
* @ctrl: control port
|
|
||||||
* @irq: interrupt line
|
* @irq: interrupt line
|
||||||
*
|
*
|
||||||
* Register an ISA bus IDE interface. Such interfaces are PIO and we
|
* In dual channel mode the 6580 has one clock per channel and we have
|
||||||
* assume do not support IRQ sharing.
|
* to software clockswitch in qc_issue_prot.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
|
static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||||
{
|
{
|
||||||
struct legacy_data *ld = &legacy_data[nr_legacy_host];
|
struct ata_timing t;
|
||||||
struct ata_host *host;
|
struct legacy_data *qdi = ap->host->private_data;
|
||||||
struct ata_port *ap;
|
int active, recovery;
|
||||||
struct platform_device *pdev;
|
u8 timing;
|
||||||
struct ata_port_operations *ops = &legacy_port_ops;
|
|
||||||
void __iomem *io_addr, *ctrl_addr;
|
|
||||||
int pio_modes = pio_mask;
|
|
||||||
u32 mask = (1 << port);
|
|
||||||
u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
|
/* Get the timing data in cycles */
|
||||||
if (IS_ERR(pdev))
|
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
|
||||||
return PTR_ERR(pdev);
|
|
||||||
|
|
||||||
ret = -EBUSY;
|
if (qdi->fast) {
|
||||||
if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL ||
|
active = 8 - FIT(t.active, 1, 8);
|
||||||
devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL)
|
recovery = 18 - FIT(t.recover, 3, 18);
|
||||||
goto fail;
|
} else {
|
||||||
|
active = 9 - FIT(t.active, 2, 9);
|
||||||
ret = -ENOMEM;
|
recovery = 15 - FIT(t.recover, 0, 15);
|
||||||
io_addr = devm_ioport_map(&pdev->dev, io, 8);
|
|
||||||
ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1);
|
|
||||||
if (!io_addr || !ctrl_addr)
|
|
||||||
goto fail;
|
|
||||||
|
|
||||||
if (ht6560a & mask) {
|
|
||||||
ops = &ht6560a_port_ops;
|
|
||||||
pio_modes = 0x07;
|
|
||||||
iordy = ATA_FLAG_NO_IORDY;
|
|
||||||
}
|
|
||||||
if (ht6560b & mask) {
|
|
||||||
ops = &ht6560b_port_ops;
|
|
||||||
pio_modes = 0x1F;
|
|
||||||
}
|
|
||||||
if (opti82c611a & mask) {
|
|
||||||
ops = &opti82c611a_port_ops;
|
|
||||||
pio_modes = 0x0F;
|
|
||||||
}
|
|
||||||
if (opti82c46x & mask) {
|
|
||||||
ops = &opti82c46x_port_ops;
|
|
||||||
pio_modes = 0x0F;
|
|
||||||
}
|
}
|
||||||
|
timing = (recovery << 4) | active | 0x08;
|
||||||
|
|
||||||
/* Probe for automatically detectable controllers */
|
qdi->clock[adev->devno] = timing;
|
||||||
|
|
||||||
if (io == 0x1F0 && ops == &legacy_port_ops) {
|
outb(timing, qdi->timing + 2 * ap->port_no);
|
||||||
|
/* Clear the FIFO */
|
||||||
|
if (adev->class != ATA_DEV_ATA)
|
||||||
|
outb(0x5F, qdi->timing + 3);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* qdi6580_set_piomode - PIO setup for single channel
|
||||||
|
* @ap: Port
|
||||||
|
* @adev: Device
|
||||||
|
*
|
||||||
|
* In single channel mode the 6580 has one clock per device and we can
|
||||||
|
* avoid the requirement to clock switch. We also have to load the timing
|
||||||
|
* into the right clock according to whether we are master or slave.
|
||||||
|
*/
|
||||||
|
|
||||||
|
static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||||
|
{
|
||||||
|
struct ata_timing t;
|
||||||
|
struct legacy_data *qdi = ap->host->private_data;
|
||||||
|
int active, recovery;
|
||||||
|
u8 timing;
|
||||||
|
|
||||||
|
/* Get the timing data in cycles */
|
||||||
|
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
|
||||||
|
|
||||||
|
if (qdi->fast) {
|
||||||
|
active = 8 - FIT(t.active, 1, 8);
|
||||||
|
recovery = 18 - FIT(t.recover, 3, 18);
|
||||||
|
} else {
|
||||||
|
active = 9 - FIT(t.active, 2, 9);
|
||||||
|
recovery = 15 - FIT(t.recover, 0, 15);
|
||||||
|
}
|
||||||
|
timing = (recovery << 4) | active | 0x08;
|
||||||
|
qdi->clock[adev->devno] = timing;
|
||||||
|
outb(timing, qdi->timing + 2 * adev->devno);
|
||||||
|
/* Clear the FIFO */
|
||||||
|
if (adev->class != ATA_DEV_ATA)
|
||||||
|
outb(0x5F, qdi->timing + 3);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* qdi_qc_issue_prot - command issue
|
||||||
|
* @qc: command pending
|
||||||
|
*
|
||||||
|
* Called when the libata layer is about to issue a command. We wrap
|
||||||
|
* this interface so that we can load the correct ATA timings.
|
||||||
|
*/
|
||||||
|
|
||||||
|
static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
|
||||||
|
{
|
||||||
|
struct ata_port *ap = qc->ap;
|
||||||
|
struct ata_device *adev = qc->dev;
|
||||||
|
struct legacy_data *qdi = ap->host->private_data;
|
||||||
|
|
||||||
|
if (qdi->clock[adev->devno] != qdi->last) {
|
||||||
|
if (adev->pio_mode) {
|
||||||
|
qdi->last = qdi->clock[adev->devno];
|
||||||
|
outb(qdi->clock[adev->devno], qdi->timing +
|
||||||
|
2 * ap->port_no);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return ata_qc_issue_prot(qc);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* For the 6580 can we flip the FIFO on/off at this point ? */
|
||||||
|
|
||||||
|
static unsigned int qdi_data_xfer(struct ata_device *adev, unsigned char *buf,
|
||||||
|
unsigned int buflen, int rw)
|
||||||
|
{
|
||||||
|
struct ata_port *ap = adev->link->ap;
|
||||||
|
int slop = buflen & 3;
|
||||||
|
|
||||||
|
if (ata_id_has_dword_io(adev->id)) {
|
||||||
|
if (rw == WRITE)
|
||||||
|
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
|
||||||
|
else
|
||||||
|
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
|
||||||
|
|
||||||
|
if (unlikely(slop)) {
|
||||||
|
u32 pad;
|
||||||
|
if (rw == WRITE) {
|
||||||
|
memcpy(&pad, buf + buflen - slop, slop);
|
||||||
|
pad = le32_to_cpu(pad);
|
||||||
|
iowrite32(pad, ap->ioaddr.data_addr);
|
||||||
|
} else {
|
||||||
|
pad = ioread32(ap->ioaddr.data_addr);
|
||||||
|
pad = cpu_to_le32(pad);
|
||||||
|
memcpy(buf + buflen - slop, &pad, slop);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return (buflen + 3) & ~3;
|
||||||
|
} else
|
||||||
|
return ata_data_xfer(adev, buf, buflen, rw);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct ata_port_operations qdi6500_port_ops = {
|
||||||
|
.set_piomode = qdi6500_set_piomode,
|
||||||
|
|
||||||
|
.tf_load = ata_tf_load,
|
||||||
|
.tf_read = ata_tf_read,
|
||||||
|
.check_status = ata_check_status,
|
||||||
|
.exec_command = ata_exec_command,
|
||||||
|
.dev_select = ata_std_dev_select,
|
||||||
|
|
||||||
|
.freeze = ata_bmdma_freeze,
|
||||||
|
.thaw = ata_bmdma_thaw,
|
||||||
|
.error_handler = ata_bmdma_error_handler,
|
||||||
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
||||||
|
.cable_detect = ata_cable_40wire,
|
||||||
|
|
||||||
|
.qc_prep = ata_qc_prep,
|
||||||
|
.qc_issue = qdi_qc_issue_prot,
|
||||||
|
|
||||||
|
.data_xfer = qdi_data_xfer,
|
||||||
|
|
||||||
|
.irq_handler = ata_interrupt,
|
||||||
|
.irq_clear = ata_bmdma_irq_clear,
|
||||||
|
.irq_on = ata_irq_on,
|
||||||
|
|
||||||
|
.port_start = ata_sff_port_start,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct ata_port_operations qdi6580_port_ops = {
|
||||||
|
.set_piomode = qdi6580_set_piomode,
|
||||||
|
|
||||||
|
.tf_load = ata_tf_load,
|
||||||
|
.tf_read = ata_tf_read,
|
||||||
|
.check_status = ata_check_status,
|
||||||
|
.exec_command = ata_exec_command,
|
||||||
|
.dev_select = ata_std_dev_select,
|
||||||
|
|
||||||
|
.freeze = ata_bmdma_freeze,
|
||||||
|
.thaw = ata_bmdma_thaw,
|
||||||
|
.error_handler = ata_bmdma_error_handler,
|
||||||
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
||||||
|
.cable_detect = ata_cable_40wire,
|
||||||
|
|
||||||
|
.qc_prep = ata_qc_prep,
|
||||||
|
.qc_issue = ata_qc_issue_prot,
|
||||||
|
|
||||||
|
.data_xfer = qdi_data_xfer,
|
||||||
|
|
||||||
|
.irq_handler = ata_interrupt,
|
||||||
|
.irq_clear = ata_bmdma_irq_clear,
|
||||||
|
.irq_on = ata_irq_on,
|
||||||
|
|
||||||
|
.port_start = ata_sff_port_start,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct ata_port_operations qdi6580dp_port_ops = {
|
||||||
|
.set_piomode = qdi6580dp_set_piomode,
|
||||||
|
|
||||||
|
.tf_load = ata_tf_load,
|
||||||
|
.tf_read = ata_tf_read,
|
||||||
|
.check_status = ata_check_status,
|
||||||
|
.exec_command = ata_exec_command,
|
||||||
|
.dev_select = ata_std_dev_select,
|
||||||
|
|
||||||
|
.freeze = ata_bmdma_freeze,
|
||||||
|
.thaw = ata_bmdma_thaw,
|
||||||
|
.error_handler = ata_bmdma_error_handler,
|
||||||
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
||||||
|
.cable_detect = ata_cable_40wire,
|
||||||
|
|
||||||
|
.qc_prep = ata_qc_prep,
|
||||||
|
.qc_issue = qdi_qc_issue_prot,
|
||||||
|
|
||||||
|
.data_xfer = qdi_data_xfer,
|
||||||
|
|
||||||
|
.irq_handler = ata_interrupt,
|
||||||
|
.irq_clear = ata_bmdma_irq_clear,
|
||||||
|
.irq_on = ata_irq_on,
|
||||||
|
|
||||||
|
.port_start = ata_sff_port_start,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct legacy_controller controllers[] = {
|
||||||
|
{"BIOS", &legacy_port_ops, 0x1F,
|
||||||
|
ATA_FLAG_NO_IORDY, NULL },
|
||||||
|
{"Snooping", &simple_port_ops, 0x1F,
|
||||||
|
0 , NULL },
|
||||||
|
{"PDC20230", &pdc20230_port_ops, 0x7,
|
||||||
|
ATA_FLAG_NO_IORDY, NULL },
|
||||||
|
{"HT6560A", &ht6560a_port_ops, 0x07,
|
||||||
|
ATA_FLAG_NO_IORDY, NULL },
|
||||||
|
{"HT6560B", &ht6560b_port_ops, 0x1F,
|
||||||
|
ATA_FLAG_NO_IORDY, NULL },
|
||||||
|
{"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
|
||||||
|
0 , NULL },
|
||||||
|
{"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
|
||||||
|
0 , NULL },
|
||||||
|
{"QDI6500", &qdi6500_port_ops, 0x07,
|
||||||
|
ATA_FLAG_NO_IORDY, NULL },
|
||||||
|
{"QDI6580", &qdi6580_port_ops, 0x1F,
|
||||||
|
0 , NULL },
|
||||||
|
{"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
|
||||||
|
0 , NULL }
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* probe_chip_type - Discover controller
|
||||||
|
* @probe: Probe entry to check
|
||||||
|
*
|
||||||
|
* Probe an ATA port and identify the type of controller. We don't
|
||||||
|
* check if the controller appears to be driveless at this point.
|
||||||
|
*/
|
||||||
|
|
||||||
|
static int probe_chip_type(struct legacy_probe *probe)
|
||||||
|
{
|
||||||
|
int mask = 1 << probe->slot;
|
||||||
|
|
||||||
|
if (probe->port == 0x1F0) {
|
||||||
unsigned long flags;
|
unsigned long flags;
|
||||||
|
|
||||||
local_irq_save(flags);
|
local_irq_save(flags);
|
||||||
|
|
||||||
/* Probes */
|
/* Probes */
|
||||||
inb(0x1F5);
|
|
||||||
outb(inb(0x1F2) | 0x80, 0x1F2);
|
outb(inb(0x1F2) | 0x80, 0x1F2);
|
||||||
|
inb(0x1F5);
|
||||||
inb(0x1F2);
|
inb(0x1F2);
|
||||||
inb(0x3F6);
|
inb(0x3F6);
|
||||||
inb(0x3F6);
|
inb(0x3F6);
|
||||||
@ -762,29 +1052,83 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl
|
|||||||
|
|
||||||
if ((inb(0x1F2) & 0x80) == 0) {
|
if ((inb(0x1F2) & 0x80) == 0) {
|
||||||
/* PDC20230c or 20630 ? */
|
/* PDC20230c or 20630 ? */
|
||||||
printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n");
|
printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller"
|
||||||
pio_modes = 0x07;
|
" detected.\n");
|
||||||
ops = &pdc20230_port_ops;
|
|
||||||
iordy = ATA_FLAG_NO_IORDY;
|
|
||||||
udelay(100);
|
udelay(100);
|
||||||
inb(0x1F5);
|
inb(0x1F5);
|
||||||
|
local_irq_restore(flags);
|
||||||
|
return PDC20230;
|
||||||
} else {
|
} else {
|
||||||
outb(0x55, 0x1F2);
|
outb(0x55, 0x1F2);
|
||||||
inb(0x1F2);
|
inb(0x1F2);
|
||||||
inb(0x1F2);
|
inb(0x1F2);
|
||||||
if (inb(0x1F2) == 0x00) {
|
if (inb(0x1F2) == 0x00)
|
||||||
printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n");
|
printk(KERN_INFO "PDC20230-B VLB ATA "
|
||||||
}
|
"controller detected.\n");
|
||||||
|
local_irq_restore(flags);
|
||||||
|
return BIOS;
|
||||||
}
|
}
|
||||||
local_irq_restore(flags);
|
local_irq_restore(flags);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
if (ht6560a & mask)
|
||||||
|
return HT6560A;
|
||||||
|
if (ht6560b & mask)
|
||||||
|
return HT6560B;
|
||||||
|
if (opti82c611a & mask)
|
||||||
|
return OPTI611A;
|
||||||
|
if (opti82c46x & mask)
|
||||||
|
return OPTI46X;
|
||||||
|
if (autospeed & mask)
|
||||||
|
return SNOOP;
|
||||||
|
return BIOS;
|
||||||
|
}
|
||||||
|
|
||||||
/* Chip does mode setting by command snooping */
|
|
||||||
if (ops == &legacy_port_ops && (autospeed & mask))
|
/**
|
||||||
ops = &simple_port_ops;
|
* legacy_init_one - attach a legacy interface
|
||||||
|
* @pl: probe record
|
||||||
|
*
|
||||||
|
* Register an ISA bus IDE interface. Such interfaces are PIO and we
|
||||||
|
* assume do not support IRQ sharing.
|
||||||
|
*/
|
||||||
|
|
||||||
|
static __init int legacy_init_one(struct legacy_probe *probe)
|
||||||
|
{
|
||||||
|
struct legacy_controller *controller = &controllers[probe->type];
|
||||||
|
int pio_modes = controller->pio_mask;
|
||||||
|
unsigned long io = probe->port;
|
||||||
|
u32 mask = (1 << probe->slot);
|
||||||
|
struct ata_port_operations *ops = controller->ops;
|
||||||
|
struct legacy_data *ld = &legacy_data[probe->slot];
|
||||||
|
struct ata_host *host = NULL;
|
||||||
|
struct ata_port *ap;
|
||||||
|
struct platform_device *pdev;
|
||||||
|
struct ata_device *dev;
|
||||||
|
void __iomem *io_addr, *ctrl_addr;
|
||||||
|
u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
iordy |= controller->flags;
|
||||||
|
|
||||||
|
pdev = platform_device_register_simple(DRV_NAME, probe->slot, NULL, 0);
|
||||||
|
if (IS_ERR(pdev))
|
||||||
|
return PTR_ERR(pdev);
|
||||||
|
|
||||||
|
ret = -EBUSY;
|
||||||
|
if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL ||
|
||||||
|
devm_request_region(&pdev->dev, io + 0x0206, 1,
|
||||||
|
"pata_legacy") == NULL)
|
||||||
|
goto fail;
|
||||||
|
|
||||||
ret = -ENOMEM;
|
ret = -ENOMEM;
|
||||||
|
io_addr = devm_ioport_map(&pdev->dev, io, 8);
|
||||||
|
ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1);
|
||||||
|
if (!io_addr || !ctrl_addr)
|
||||||
|
goto fail;
|
||||||
|
if (controller->setup)
|
||||||
|
if (controller->setup(probe, ld) < 0)
|
||||||
|
goto fail;
|
||||||
host = ata_host_alloc(&pdev->dev, 1);
|
host = ata_host_alloc(&pdev->dev, 1);
|
||||||
if (!host)
|
if (!host)
|
||||||
goto fail;
|
goto fail;
|
||||||
@ -799,17 +1143,30 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl
|
|||||||
ata_std_ports(&ap->ioaddr);
|
ata_std_ports(&ap->ioaddr);
|
||||||
ap->private_data = ld;
|
ap->private_data = ld;
|
||||||
|
|
||||||
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl);
|
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
|
||||||
|
|
||||||
ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht);
|
ret = ata_host_activate(host, probe->irq, ata_interrupt, 0,
|
||||||
|
&legacy_sht);
|
||||||
if (ret)
|
if (ret)
|
||||||
goto fail;
|
goto fail;
|
||||||
|
|
||||||
legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
|
|
||||||
ld->platform_dev = pdev;
|
ld->platform_dev = pdev;
|
||||||
return 0;
|
|
||||||
|
|
||||||
|
/* Nothing found means we drop the port as its probably not there */
|
||||||
|
|
||||||
|
ret = -ENODEV;
|
||||||
|
ata_link_for_each_dev(dev, &ap->link) {
|
||||||
|
if (!ata_dev_absent(dev)) {
|
||||||
|
legacy_host[probe->slot] = host;
|
||||||
|
ld->platform_dev = pdev;
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
fail:
|
fail:
|
||||||
|
if (host)
|
||||||
|
ata_host_detach(host);
|
||||||
|
/* FIXME: use devm for this */
|
||||||
|
if (ld->timing)
|
||||||
|
release_region(ld->timing, 2);
|
||||||
platform_device_unregister(pdev);
|
platform_device_unregister(pdev);
|
||||||
return ret;
|
return ret;
|
||||||
}
|
}
|
||||||
@ -820,13 +1177,15 @@ fail:
|
|||||||
* @master: set this if we find an ATA master
|
* @master: set this if we find an ATA master
|
||||||
* @master: set this if we find an ATA secondary
|
* @master: set this if we find an ATA secondary
|
||||||
*
|
*
|
||||||
* A small number of vendors implemented early PCI ATA interfaces on bridge logic
|
* A small number of vendors implemented early PCI ATA interfaces
|
||||||
* without the ATA interface being PCI visible. Where we have a matching PCI driver
|
* on bridge logic without the ATA interface being PCI visible.
|
||||||
* we must skip the relevant device here. If we don't know about it then the legacy
|
* Where we have a matching PCI driver we must skip the relevant
|
||||||
* driver is the right driver anyway.
|
* device here. If we don't know about it then the legacy driver
|
||||||
|
* is the right driver anyway.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary)
|
static void legacy_check_special_cases(struct pci_dev *p, int *primary,
|
||||||
|
int *secondary)
|
||||||
{
|
{
|
||||||
/* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
|
/* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
|
||||||
if (p->vendor == 0x1078 && p->device == 0x0000) {
|
if (p->vendor == 0x1078 && p->device == 0x0000) {
|
||||||
@ -842,7 +1201,8 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec
|
|||||||
if (p->vendor == 0x8086 && p->device == 0x1234) {
|
if (p->vendor == 0x8086 && p->device == 0x1234) {
|
||||||
u16 r;
|
u16 r;
|
||||||
pci_read_config_word(p, 0x6C, &r);
|
pci_read_config_word(p, 0x6C, &r);
|
||||||
if (r & 0x8000) { /* ATA port enabled */
|
if (r & 0x8000) {
|
||||||
|
/* ATA port enabled */
|
||||||
if (r & 0x4000)
|
if (r & 0x4000)
|
||||||
*secondary = 1;
|
*secondary = 1;
|
||||||
else
|
else
|
||||||
@ -852,6 +1212,117 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec
|
|||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static __init void probe_opti_vlb(void)
|
||||||
|
{
|
||||||
|
/* If an OPTI 82C46X is present find out where the channels are */
|
||||||
|
static const char *optis[4] = {
|
||||||
|
"3/463MV", "5MV",
|
||||||
|
"5MVA", "5MVB"
|
||||||
|
};
|
||||||
|
u8 chans = 1;
|
||||||
|
u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
|
||||||
|
|
||||||
|
opti82c46x = 3; /* Assume master and slave first */
|
||||||
|
printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n",
|
||||||
|
optis[ctrl]);
|
||||||
|
if (ctrl == 3)
|
||||||
|
chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
|
||||||
|
ctrl = opti_syscfg(0xAC);
|
||||||
|
/* Check enabled and this port is the 465MV port. On the
|
||||||
|
MVB we may have two channels */
|
||||||
|
if (ctrl & 8) {
|
||||||
|
if (chans == 2) {
|
||||||
|
legacy_probe_add(0x1F0, 14, OPTI46X, 0);
|
||||||
|
legacy_probe_add(0x170, 15, OPTI46X, 0);
|
||||||
|
}
|
||||||
|
if (ctrl & 4)
|
||||||
|
legacy_probe_add(0x170, 15, OPTI46X, 0);
|
||||||
|
else
|
||||||
|
legacy_probe_add(0x1F0, 14, OPTI46X, 0);
|
||||||
|
} else
|
||||||
|
legacy_probe_add(0x1F0, 14, OPTI46X, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port)
|
||||||
|
{
|
||||||
|
static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
|
||||||
|
/* Check card type */
|
||||||
|
if ((r & 0xF0) == 0xC0) {
|
||||||
|
/* QD6500: single channel */
|
||||||
|
if (r & 8) {
|
||||||
|
/* Disabled ? */
|
||||||
|
release_region(port, 2);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
|
||||||
|
QDI6500, port);
|
||||||
|
}
|
||||||
|
if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
|
||||||
|
/* QD6580: dual channel */
|
||||||
|
if (!request_region(port + 2 , 2, "pata_qdi")) {
|
||||||
|
release_region(port, 2);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
res = inb(port + 3);
|
||||||
|
/* Single channel mode ? */
|
||||||
|
if (res & 1)
|
||||||
|
legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
|
||||||
|
QDI6580, port);
|
||||||
|
else { /* Dual channel mode */
|
||||||
|
legacy_probe_add(0x1F0, 14, QDI6580DP, port);
|
||||||
|
/* port + 0x02, r & 0x04 */
|
||||||
|
legacy_probe_add(0x170, 15, QDI6580DP, port + 2);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static __init void probe_qdi_vlb(void)
|
||||||
|
{
|
||||||
|
unsigned long flags;
|
||||||
|
static const unsigned long qd_port[2] = { 0x30, 0xB0 };
|
||||||
|
int i;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Check each possible QD65xx base address
|
||||||
|
*/
|
||||||
|
|
||||||
|
for (i = 0; i < 2; i++) {
|
||||||
|
unsigned long port = qd_port[i];
|
||||||
|
u8 r, res;
|
||||||
|
|
||||||
|
|
||||||
|
if (request_region(port, 2, "pata_qdi")) {
|
||||||
|
/* Check for a card */
|
||||||
|
local_irq_save(flags);
|
||||||
|
/* I have no h/w that needs this delay but it
|
||||||
|
is present in the historic code */
|
||||||
|
r = inb(port);
|
||||||
|
udelay(1);
|
||||||
|
outb(0x19, port);
|
||||||
|
udelay(1);
|
||||||
|
res = inb(port);
|
||||||
|
udelay(1);
|
||||||
|
outb(r, port);
|
||||||
|
udelay(1);
|
||||||
|
local_irq_restore(flags);
|
||||||
|
|
||||||
|
/* Fail */
|
||||||
|
if (res == 0x19) {
|
||||||
|
release_region(port, 2);
|
||||||
|
continue;
|
||||||
|
}
|
||||||
|
/* Passes the presence test */
|
||||||
|
r = inb(port + 1);
|
||||||
|
udelay(1);
|
||||||
|
/* Check port agrees with port set */
|
||||||
|
if ((r & 2) >> 1 != i) {
|
||||||
|
release_region(port, 2);
|
||||||
|
continue;
|
||||||
|
}
|
||||||
|
qdi65_identify_port(r, res, port);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* legacy_init - attach legacy interfaces
|
* legacy_init - attach legacy interfaces
|
||||||
@ -869,15 +1340,17 @@ static __init int legacy_init(void)
|
|||||||
int ct = 0;
|
int ct = 0;
|
||||||
int primary = 0;
|
int primary = 0;
|
||||||
int secondary = 0;
|
int secondary = 0;
|
||||||
int last_port = NR_HOST;
|
int pci_present = 0;
|
||||||
|
struct legacy_probe *pl = &probe_list[0];
|
||||||
|
int slot = 0;
|
||||||
|
|
||||||
struct pci_dev *p = NULL;
|
struct pci_dev *p = NULL;
|
||||||
|
|
||||||
for_each_pci_dev(p) {
|
for_each_pci_dev(p) {
|
||||||
int r;
|
int r;
|
||||||
/* Check for any overlap of the system ATA mappings. Native mode controllers
|
/* Check for any overlap of the system ATA mappings. Native
|
||||||
stuck on these addresses or some devices in 'raid' mode won't be found by
|
mode controllers stuck on these addresses or some devices
|
||||||
the storage class test */
|
in 'raid' mode won't be found by the storage class test */
|
||||||
for (r = 0; r < 6; r++) {
|
for (r = 0; r < 6; r++) {
|
||||||
if (pci_resource_start(p, r) == 0x1f0)
|
if (pci_resource_start(p, r) == 0x1f0)
|
||||||
primary = 1;
|
primary = 1;
|
||||||
@ -887,49 +1360,37 @@ static __init int legacy_init(void)
|
|||||||
/* Check for special cases */
|
/* Check for special cases */
|
||||||
legacy_check_special_cases(p, &primary, &secondary);
|
legacy_check_special_cases(p, &primary, &secondary);
|
||||||
|
|
||||||
/* If PCI bus is present then don't probe for tertiary legacy ports */
|
/* If PCI bus is present then don't probe for tertiary
|
||||||
if (probe_all == 0)
|
legacy ports */
|
||||||
last_port = 2;
|
pci_present = 1;
|
||||||
}
|
}
|
||||||
|
|
||||||
/* If an OPTI 82C46X is present find out where the channels are */
|
if (primary == 0 || all)
|
||||||
if (opti82c46x) {
|
legacy_probe_add(0x1F0, 14, UNKNOWN, 0);
|
||||||
static const char *optis[4] = {
|
if (secondary == 0 || all)
|
||||||
"3/463MV", "5MV",
|
legacy_probe_add(0x170, 15, UNKNOWN, 0);
|
||||||
"5MVA", "5MVB"
|
|
||||||
};
|
|
||||||
u8 chans = 1;
|
|
||||||
u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
|
|
||||||
|
|
||||||
opti82c46x = 3; /* Assume master and slave first */
|
if (probe_all || !pci_present) {
|
||||||
printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]);
|
/* ISA/VLB extra ports */
|
||||||
if (ctrl == 3)
|
legacy_probe_add(0x1E8, 11, UNKNOWN, 0);
|
||||||
chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
|
legacy_probe_add(0x168, 10, UNKNOWN, 0);
|
||||||
ctrl = opti_syscfg(0xAC);
|
legacy_probe_add(0x1E0, 8, UNKNOWN, 0);
|
||||||
/* Check enabled and this port is the 465MV port. On the
|
legacy_probe_add(0x160, 12, UNKNOWN, 0);
|
||||||
MVB we may have two channels */
|
|
||||||
if (ctrl & 8) {
|
|
||||||
if (ctrl & 4)
|
|
||||||
opti82c46x = 2; /* Slave */
|
|
||||||
else
|
|
||||||
opti82c46x = 1; /* Master */
|
|
||||||
if (chans == 2)
|
|
||||||
opti82c46x = 3; /* Master and Slave */
|
|
||||||
} /* Slave only */
|
|
||||||
else if (chans == 1)
|
|
||||||
opti82c46x = 1;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
for (i = 0; i < last_port; i++) {
|
if (opti82c46x)
|
||||||
/* Skip primary if we have seen a PCI one */
|
probe_opti_vlb();
|
||||||
if (i == 0 && primary == 1)
|
if (qdi)
|
||||||
|
probe_qdi_vlb();
|
||||||
|
|
||||||
|
|
||||||
|
for (i = 0; i < NR_HOST; i++, pl++) {
|
||||||
|
if (pl->port == 0)
|
||||||
continue;
|
continue;
|
||||||
/* Skip secondary if we have seen a PCI one */
|
if (pl->type == UNKNOWN)
|
||||||
if (i == 1 && secondary == 1)
|
pl->type = probe_chip_type(pl);
|
||||||
continue;
|
pl->slot = slot++;
|
||||||
if (legacy_init_one(i, legacy_port[i],
|
if (legacy_init_one(pl) == 0)
|
||||||
legacy_port[i] + 0x0206,
|
|
||||||
legacy_irq[i]) == 0)
|
|
||||||
ct++;
|
ct++;
|
||||||
}
|
}
|
||||||
if (ct != 0)
|
if (ct != 0)
|
||||||
@ -943,7 +1404,6 @@ static __exit void legacy_exit(void)
|
|||||||
|
|
||||||
for (i = 0; i < nr_legacy_host; i++) {
|
for (i = 0; i < nr_legacy_host; i++) {
|
||||||
struct legacy_data *ld = &legacy_data[i];
|
struct legacy_data *ld = &legacy_data[i];
|
||||||
|
|
||||||
ata_host_detach(legacy_host[i]);
|
ata_host_detach(legacy_host[i]);
|
||||||
platform_device_unregister(ld->platform_dev);
|
platform_device_unregister(ld->platform_dev);
|
||||||
if (ld->timing)
|
if (ld->timing)
|
||||||
@ -962,9 +1422,9 @@ module_param(ht6560a, int, 0);
|
|||||||
module_param(ht6560b, int, 0);
|
module_param(ht6560b, int, 0);
|
||||||
module_param(opti82c611a, int, 0);
|
module_param(opti82c611a, int, 0);
|
||||||
module_param(opti82c46x, int, 0);
|
module_param(opti82c46x, int, 0);
|
||||||
|
module_param(qdi, int, 0);
|
||||||
module_param(pio_mask, int, 0);
|
module_param(pio_mask, int, 0);
|
||||||
module_param(iordy_mask, int, 0);
|
module_param(iordy_mask, int, 0);
|
||||||
|
|
||||||
module_init(legacy_init);
|
module_init(legacy_init);
|
||||||
module_exit(legacy_exit);
|
module_exit(legacy_exit);
|
||||||
|
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user