pata_legacy: resychronize with upstream changes and resubmit

Update the legacy driver so it can handle VLB ports nicely, and has an
internal structure for nailing new ISA/VLB forms in.  Anyone got an ALI14xx
and a spare day ;)

Also adds an "all" parameter so you can load this driver after all the PCI
ones in a boot time kernel and tell it to grab anything ST412 compatible
even if it is an unknown PCI device.  That allows libata to offer the same
"just get me a disk somehow" fallback that old IDE did.

Obsoletes pata_qdi.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Alan Cox 2008-01-10 14:33:10 -08:00 committed by Jeff Garzik
parent c294f1b329
commit defc9cd826

View File

@ -68,8 +68,9 @@
#define NR_HOST 6
static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
static int legacy_irq[NR_HOST] = { 14, 15, 11, 10, 8, 12 };
static int all;
module_param(all, int, 0444);
MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
struct legacy_data {
unsigned long timing;
@ -80,20 +81,102 @@ struct legacy_data {
};
enum controller {
BIOS = 0,
SNOOP = 1,
PDC20230 = 2,
HT6560A = 3,
HT6560B = 4,
OPTI611A = 5,
OPTI46X = 6,
QDI6500 = 7,
QDI6580 = 8,
QDI6580DP = 9, /* Dual channel mode is different */
UNKNOWN = -1
};
struct legacy_probe {
unsigned char *name;
unsigned long port;
unsigned int irq;
unsigned int slot;
enum controller type;
unsigned long private;
};
struct legacy_controller {
const char *name;
struct ata_port_operations *ops;
unsigned int pio_mask;
unsigned int flags;
int (*setup)(struct legacy_probe *probe, struct legacy_data *data);
};
static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
static struct legacy_probe probe_list[NR_HOST];
static struct legacy_data legacy_data[NR_HOST];
static struct ata_host *legacy_host[NR_HOST];
static int nr_legacy_host;
static int probe_all; /* Set to check all ISA port ranges */
static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */
static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */
static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */
static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
static int autospeed; /* Chip present which snoops speed changes */
static int pio_mask = 0x1F; /* PIO range for autospeed devices */
static int probe_all; /* Set to check all ISA port ranges */
static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */
static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
static int qdi; /* Set to probe QDI controllers */
static int autospeed; /* Chip present which snoops speed changes */
static int pio_mask = 0x1F; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
/**
* legacy_probe_add - Add interface to probe list
* @port: Controller port
* @irq: IRQ number
* @type: Controller type
* @private: Controller specific info
*
* Add an entry into the probe list for ATA controllers. This is used
* to add the default ISA slots and then to build up the table
* further according to other ISA/VLB/Weird device scans
*
* An I/O port list is used to keep ordering stable and sane, as we
* don't have any good way to talk about ordering otherwise
*/
static int legacy_probe_add(unsigned long port, unsigned int irq,
enum controller type, unsigned long private)
{
struct legacy_probe *lp = &probe_list[0];
int i;
struct legacy_probe *free = NULL;
for (i = 0; i < NR_HOST; i++) {
if (lp->port == 0 && free == NULL)
free = lp;
/* Matching port, or the correct slot for ordering */
if (lp->port == port || legacy_port[i] == port) {
free = lp;
break;
}
lp++;
}
if (free == NULL) {
printk(KERN_ERR "pata_legacy: Too many interfaces.\n");
return -1;
}
/* Fill in the entry for later probing */
free->port = port;
free->irq = irq;
free->type = type;
free->private = private;
return 0;
}
/**
* legacy_set_mode - mode setting
* @link: IDE link
@ -113,7 +196,8 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused)
ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
ata_dev_printk(dev, KERN_INFO,
"configured for PIO\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
@ -171,7 +255,7 @@ static struct ata_port_operations simple_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.port_start = ata_sff_port_start,
};
static struct ata_port_operations legacy_port_ops = {
@ -198,15 +282,16 @@ static struct ata_port_operations legacy_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.port_start = ata_sff_port_start,
};
/*
* Promise 20230C and 20620 support
*
* This controller supports PIO0 to PIO2. We set PIO timings conservatively to
* allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to
* controller and PIO'd to the host and not supported.
* This controller supports PIO0 to PIO2. We set PIO timings
* conservatively to allow for 50MHz Vesa Local Bus. The 20620 DMA
* support is weird being DMA to controller and PIO'd to the host
* and not supported.
*/
static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
@ -221,8 +306,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
local_irq_save(flags);
/* Unlock the control interface */
do
{
do {
inb(0x1F5);
outb(inb(0x1F2) | 0x80, 0x1F2);
inb(0x1F2);
@ -231,7 +315,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
inb(0x1F2);
inb(0x1F2);
}
while((inb(0x1F2) & 0x80) && --tries);
while ((inb(0x1F2) & 0x80) && --tries);
local_irq_restore(flags);
@ -250,7 +334,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw)
unsigned char *buf, unsigned int buflen, int rw)
{
if (ata_id_has_dword_io(dev->id)) {
struct ata_port *ap = dev->link->ap;
@ -312,14 +396,14 @@ static struct ata_port_operations pdc20230_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.port_start = ata_sff_port_start,
};
/*
* Holtek 6560A support
*
* This controller supports PIO0 to PIO2 (no IORDY even though higher timings
* can be loaded).
* This controller supports PIO0 to PIO2 (no IORDY even though higher
* timings can be loaded).
*/
static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
@ -366,14 +450,14 @@ static struct ata_port_operations ht6560a_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.port_start = ata_sff_port_start,
};
/*
* Holtek 6560B support
*
* This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting
* unless we see an ATAPI device in which case we force it off.
* This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO
* setting unless we see an ATAPI device in which case we force it off.
*
* FIXME: need to implement 2nd channel support.
*/
@ -400,7 +484,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
if (adev->class != ATA_DEV_ATA) {
u8 rconf = inb(0x3E6);
if (rconf & 0x24) {
rconf &= ~ 0x24;
rconf &= ~0x24;
outb(rconf, 0x3E6);
}
}
@ -425,13 +509,13 @@ static struct ata_port_operations ht6560b_port_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
.data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.port_start = ata_sff_port_start,
};
/*
@ -464,7 +548,8 @@ static u8 opti_syscfg(u8 reg)
* This controller supports PIO0 to PIO3.
*/
static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev)
static void opti82c611a_set_piomode(struct ata_port *ap,
struct ata_device *adev)
{
u8 active, recover, setup;
struct ata_timing t;
@ -551,7 +636,7 @@ static struct ata_port_operations opti82c611a_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.port_start = ata_sff_port_start,
};
/*
@ -683,77 +768,282 @@ static struct ata_port_operations opti82c46x_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.port_start = ata_sff_port_start,
};
static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct ata_timing t;
struct legacy_data *qdi = ap->host->private_data;
int active, recovery;
u8 timing;
/* Get the timing data in cycles */
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
} else {
active = 9 - FIT(t.active, 2, 9);
recovery = 15 - FIT(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
qdi->clock[adev->devno] = timing;
outb(timing, qdi->timing);
}
/**
* legacy_init_one - attach a legacy interface
* @port: port number
* @io: I/O port start
* @ctrl: control port
* qdi6580dp_set_piomode - PIO setup for dual channel
* @ap: Port
* @adev: Device
* @irq: interrupt line
*
* Register an ISA bus IDE interface. Such interfaces are PIO and we
* assume do not support IRQ sharing.
* In dual channel mode the 6580 has one clock per channel and we have
* to software clockswitch in qc_issue_prot.
*/
static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct legacy_data *ld = &legacy_data[nr_legacy_host];
struct ata_host *host;
struct ata_port *ap;
struct platform_device *pdev;
struct ata_port_operations *ops = &legacy_port_ops;
void __iomem *io_addr, *ctrl_addr;
int pio_modes = pio_mask;
u32 mask = (1 << port);
u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
int ret;
struct ata_timing t;
struct legacy_data *qdi = ap->host->private_data;
int active, recovery;
u8 timing;
pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
/* Get the timing data in cycles */
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
ret = -EBUSY;
if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL ||
devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL)
goto fail;
ret = -ENOMEM;
io_addr = devm_ioport_map(&pdev->dev, io, 8);
ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1);
if (!io_addr || !ctrl_addr)
goto fail;
if (ht6560a & mask) {
ops = &ht6560a_port_ops;
pio_modes = 0x07;
iordy = ATA_FLAG_NO_IORDY;
}
if (ht6560b & mask) {
ops = &ht6560b_port_ops;
pio_modes = 0x1F;
}
if (opti82c611a & mask) {
ops = &opti82c611a_port_ops;
pio_modes = 0x0F;
}
if (opti82c46x & mask) {
ops = &opti82c46x_port_ops;
pio_modes = 0x0F;
if (qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
} else {
active = 9 - FIT(t.active, 2, 9);
recovery = 15 - FIT(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
/* Probe for automatically detectable controllers */
qdi->clock[adev->devno] = timing;
if (io == 0x1F0 && ops == &legacy_port_ops) {
outb(timing, qdi->timing + 2 * ap->port_no);
/* Clear the FIFO */
if (adev->class != ATA_DEV_ATA)
outb(0x5F, qdi->timing + 3);
}
/**
* qdi6580_set_piomode - PIO setup for single channel
* @ap: Port
* @adev: Device
*
* In single channel mode the 6580 has one clock per device and we can
* avoid the requirement to clock switch. We also have to load the timing
* into the right clock according to whether we are master or slave.
*/
static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct ata_timing t;
struct legacy_data *qdi = ap->host->private_data;
int active, recovery;
u8 timing;
/* Get the timing data in cycles */
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
} else {
active = 9 - FIT(t.active, 2, 9);
recovery = 15 - FIT(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
qdi->clock[adev->devno] = timing;
outb(timing, qdi->timing + 2 * adev->devno);
/* Clear the FIFO */
if (adev->class != ATA_DEV_ATA)
outb(0x5F, qdi->timing + 3);
}
/**
* qdi_qc_issue_prot - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings.
*/
static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
struct legacy_data *qdi = ap->host->private_data;
if (qdi->clock[adev->devno] != qdi->last) {
if (adev->pio_mode) {
qdi->last = qdi->clock[adev->devno];
outb(qdi->clock[adev->devno], qdi->timing +
2 * ap->port_no);
}
}
return ata_qc_issue_prot(qc);
}
/* For the 6580 can we flip the FIFO on/off at this point ? */
static unsigned int qdi_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int rw)
{
struct ata_port *ap = adev->link->ap;
int slop = buflen & 3;
if (ata_id_has_dword_io(adev->id)) {
if (rw == WRITE)
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
else
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
u32 pad;
if (rw == WRITE) {
memcpy(&pad, buf + buflen - slop, slop);
pad = le32_to_cpu(pad);
iowrite32(pad, ap->ioaddr.data_addr);
} else {
pad = ioread32(ap->ioaddr.data_addr);
pad = cpu_to_le32(pad);
memcpy(buf + buflen - slop, &pad, slop);
}
}
return (buflen + 3) & ~3;
} else
return ata_data_xfer(adev, buf, buflen, rw);
}
static struct ata_port_operations qdi6500_port_ops = {
.set_piomode = qdi6500_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = qdi_qc_issue_prot,
.data_xfer = qdi_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static struct ata_port_operations qdi6580_port_ops = {
.set_piomode = qdi6580_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = qdi_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static struct ata_port_operations qdi6580dp_port_ops = {
.set_piomode = qdi6580dp_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = qdi_qc_issue_prot,
.data_xfer = qdi_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static struct legacy_controller controllers[] = {
{"BIOS", &legacy_port_ops, 0x1F,
ATA_FLAG_NO_IORDY, NULL },
{"Snooping", &simple_port_ops, 0x1F,
0 , NULL },
{"PDC20230", &pdc20230_port_ops, 0x7,
ATA_FLAG_NO_IORDY, NULL },
{"HT6560A", &ht6560a_port_ops, 0x07,
ATA_FLAG_NO_IORDY, NULL },
{"HT6560B", &ht6560b_port_ops, 0x1F,
ATA_FLAG_NO_IORDY, NULL },
{"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
0 , NULL },
{"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
0 , NULL },
{"QDI6500", &qdi6500_port_ops, 0x07,
ATA_FLAG_NO_IORDY, NULL },
{"QDI6580", &qdi6580_port_ops, 0x1F,
0 , NULL },
{"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
0 , NULL }
};
/**
* probe_chip_type - Discover controller
* @probe: Probe entry to check
*
* Probe an ATA port and identify the type of controller. We don't
* check if the controller appears to be driveless at this point.
*/
static int probe_chip_type(struct legacy_probe *probe)
{
int mask = 1 << probe->slot;
if (probe->port == 0x1F0) {
unsigned long flags;
local_irq_save(flags);
/* Probes */
inb(0x1F5);
outb(inb(0x1F2) | 0x80, 0x1F2);
inb(0x1F5);
inb(0x1F2);
inb(0x3F6);
inb(0x3F6);
@ -762,29 +1052,83 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl
if ((inb(0x1F2) & 0x80) == 0) {
/* PDC20230c or 20630 ? */
printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n");
pio_modes = 0x07;
ops = &pdc20230_port_ops;
iordy = ATA_FLAG_NO_IORDY;
printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller"
" detected.\n");
udelay(100);
inb(0x1F5);
local_irq_restore(flags);
return PDC20230;
} else {
outb(0x55, 0x1F2);
inb(0x1F2);
inb(0x1F2);
if (inb(0x1F2) == 0x00) {
printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n");
}
if (inb(0x1F2) == 0x00)
printk(KERN_INFO "PDC20230-B VLB ATA "
"controller detected.\n");
local_irq_restore(flags);
return BIOS;
}
local_irq_restore(flags);
}
if (ht6560a & mask)
return HT6560A;
if (ht6560b & mask)
return HT6560B;
if (opti82c611a & mask)
return OPTI611A;
if (opti82c46x & mask)
return OPTI46X;
if (autospeed & mask)
return SNOOP;
return BIOS;
}
/* Chip does mode setting by command snooping */
if (ops == &legacy_port_ops && (autospeed & mask))
ops = &simple_port_ops;
/**
* legacy_init_one - attach a legacy interface
* @pl: probe record
*
* Register an ISA bus IDE interface. Such interfaces are PIO and we
* assume do not support IRQ sharing.
*/
static __init int legacy_init_one(struct legacy_probe *probe)
{
struct legacy_controller *controller = &controllers[probe->type];
int pio_modes = controller->pio_mask;
unsigned long io = probe->port;
u32 mask = (1 << probe->slot);
struct ata_port_operations *ops = controller->ops;
struct legacy_data *ld = &legacy_data[probe->slot];
struct ata_host *host = NULL;
struct ata_port *ap;
struct platform_device *pdev;
struct ata_device *dev;
void __iomem *io_addr, *ctrl_addr;
u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
int ret;
iordy |= controller->flags;
pdev = platform_device_register_simple(DRV_NAME, probe->slot, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
ret = -EBUSY;
if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL ||
devm_request_region(&pdev->dev, io + 0x0206, 1,
"pata_legacy") == NULL)
goto fail;
ret = -ENOMEM;
io_addr = devm_ioport_map(&pdev->dev, io, 8);
ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1);
if (!io_addr || !ctrl_addr)
goto fail;
if (controller->setup)
if (controller->setup(probe, ld) < 0)
goto fail;
host = ata_host_alloc(&pdev->dev, 1);
if (!host)
goto fail;
@ -799,17 +1143,30 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl
ata_std_ports(&ap->ioaddr);
ap->private_data = ld;
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl);
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht);
ret = ata_host_activate(host, probe->irq, ata_interrupt, 0,
&legacy_sht);
if (ret)
goto fail;
legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
ld->platform_dev = pdev;
return 0;
/* Nothing found means we drop the port as its probably not there */
ret = -ENODEV;
ata_link_for_each_dev(dev, &ap->link) {
if (!ata_dev_absent(dev)) {
legacy_host[probe->slot] = host;
ld->platform_dev = pdev;
return 0;
}
}
fail:
if (host)
ata_host_detach(host);
/* FIXME: use devm for this */
if (ld->timing)
release_region(ld->timing, 2);
platform_device_unregister(pdev);
return ret;
}
@ -820,13 +1177,15 @@ fail:
* @master: set this if we find an ATA master
* @master: set this if we find an ATA secondary
*
* A small number of vendors implemented early PCI ATA interfaces on bridge logic
* without the ATA interface being PCI visible. Where we have a matching PCI driver
* we must skip the relevant device here. If we don't know about it then the legacy
* driver is the right driver anyway.
* A small number of vendors implemented early PCI ATA interfaces
* on bridge logic without the ATA interface being PCI visible.
* Where we have a matching PCI driver we must skip the relevant
* device here. If we don't know about it then the legacy driver
* is the right driver anyway.
*/
static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary)
static void legacy_check_special_cases(struct pci_dev *p, int *primary,
int *secondary)
{
/* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
if (p->vendor == 0x1078 && p->device == 0x0000) {
@ -842,7 +1201,8 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec
if (p->vendor == 0x8086 && p->device == 0x1234) {
u16 r;
pci_read_config_word(p, 0x6C, &r);
if (r & 0x8000) { /* ATA port enabled */
if (r & 0x8000) {
/* ATA port enabled */
if (r & 0x4000)
*secondary = 1;
else
@ -852,6 +1212,117 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec
}
}
static __init void probe_opti_vlb(void)
{
/* If an OPTI 82C46X is present find out where the channels are */
static const char *optis[4] = {
"3/463MV", "5MV",
"5MVA", "5MVB"
};
u8 chans = 1;
u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
opti82c46x = 3; /* Assume master and slave first */
printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n",
optis[ctrl]);
if (ctrl == 3)
chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
ctrl = opti_syscfg(0xAC);
/* Check enabled and this port is the 465MV port. On the
MVB we may have two channels */
if (ctrl & 8) {
if (chans == 2) {
legacy_probe_add(0x1F0, 14, OPTI46X, 0);
legacy_probe_add(0x170, 15, OPTI46X, 0);
}
if (ctrl & 4)
legacy_probe_add(0x170, 15, OPTI46X, 0);
else
legacy_probe_add(0x1F0, 14, OPTI46X, 0);
} else
legacy_probe_add(0x1F0, 14, OPTI46X, 0);
}
static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port)
{
static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
/* Check card type */
if ((r & 0xF0) == 0xC0) {
/* QD6500: single channel */
if (r & 8) {
/* Disabled ? */
release_region(port, 2);
return;
}
legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
QDI6500, port);
}
if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
/* QD6580: dual channel */
if (!request_region(port + 2 , 2, "pata_qdi")) {
release_region(port, 2);
return;
}
res = inb(port + 3);
/* Single channel mode ? */
if (res & 1)
legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
QDI6580, port);
else { /* Dual channel mode */
legacy_probe_add(0x1F0, 14, QDI6580DP, port);
/* port + 0x02, r & 0x04 */
legacy_probe_add(0x170, 15, QDI6580DP, port + 2);
}
}
}
static __init void probe_qdi_vlb(void)
{
unsigned long flags;
static const unsigned long qd_port[2] = { 0x30, 0xB0 };
int i;
/*
* Check each possible QD65xx base address
*/
for (i = 0; i < 2; i++) {
unsigned long port = qd_port[i];
u8 r, res;
if (request_region(port, 2, "pata_qdi")) {
/* Check for a card */
local_irq_save(flags);
/* I have no h/w that needs this delay but it
is present in the historic code */
r = inb(port);
udelay(1);
outb(0x19, port);
udelay(1);
res = inb(port);
udelay(1);
outb(r, port);
udelay(1);
local_irq_restore(flags);
/* Fail */
if (res == 0x19) {
release_region(port, 2);
continue;
}
/* Passes the presence test */
r = inb(port + 1);
udelay(1);
/* Check port agrees with port set */
if ((r & 2) >> 1 != i) {
release_region(port, 2);
continue;
}
qdi65_identify_port(r, res, port);
}
}
}
/**
* legacy_init - attach legacy interfaces
@ -869,15 +1340,17 @@ static __init int legacy_init(void)
int ct = 0;
int primary = 0;
int secondary = 0;
int last_port = NR_HOST;
int pci_present = 0;
struct legacy_probe *pl = &probe_list[0];
int slot = 0;
struct pci_dev *p = NULL;
for_each_pci_dev(p) {
int r;
/* Check for any overlap of the system ATA mappings. Native mode controllers
stuck on these addresses or some devices in 'raid' mode won't be found by
the storage class test */
/* Check for any overlap of the system ATA mappings. Native
mode controllers stuck on these addresses or some devices
in 'raid' mode won't be found by the storage class test */
for (r = 0; r < 6; r++) {
if (pci_resource_start(p, r) == 0x1f0)
primary = 1;
@ -887,49 +1360,37 @@ static __init int legacy_init(void)
/* Check for special cases */
legacy_check_special_cases(p, &primary, &secondary);
/* If PCI bus is present then don't probe for tertiary legacy ports */
if (probe_all == 0)
last_port = 2;
/* If PCI bus is present then don't probe for tertiary
legacy ports */
pci_present = 1;
}
/* If an OPTI 82C46X is present find out where the channels are */
if (opti82c46x) {
static const char *optis[4] = {
"3/463MV", "5MV",
"5MVA", "5MVB"
};
u8 chans = 1;
u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
if (primary == 0 || all)
legacy_probe_add(0x1F0, 14, UNKNOWN, 0);
if (secondary == 0 || all)
legacy_probe_add(0x170, 15, UNKNOWN, 0);
opti82c46x = 3; /* Assume master and slave first */
printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]);
if (ctrl == 3)
chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
ctrl = opti_syscfg(0xAC);
/* Check enabled and this port is the 465MV port. On the
MVB we may have two channels */
if (ctrl & 8) {
if (ctrl & 4)
opti82c46x = 2; /* Slave */
else
opti82c46x = 1; /* Master */
if (chans == 2)
opti82c46x = 3; /* Master and Slave */
} /* Slave only */
else if (chans == 1)
opti82c46x = 1;
if (probe_all || !pci_present) {
/* ISA/VLB extra ports */
legacy_probe_add(0x1E8, 11, UNKNOWN, 0);
legacy_probe_add(0x168, 10, UNKNOWN, 0);
legacy_probe_add(0x1E0, 8, UNKNOWN, 0);
legacy_probe_add(0x160, 12, UNKNOWN, 0);
}
for (i = 0; i < last_port; i++) {
/* Skip primary if we have seen a PCI one */
if (i == 0 && primary == 1)
if (opti82c46x)
probe_opti_vlb();
if (qdi)
probe_qdi_vlb();
for (i = 0; i < NR_HOST; i++, pl++) {
if (pl->port == 0)
continue;
/* Skip secondary if we have seen a PCI one */
if (i == 1 && secondary == 1)
continue;
if (legacy_init_one(i, legacy_port[i],
legacy_port[i] + 0x0206,
legacy_irq[i]) == 0)
if (pl->type == UNKNOWN)
pl->type = probe_chip_type(pl);
pl->slot = slot++;
if (legacy_init_one(pl) == 0)
ct++;
}
if (ct != 0)
@ -943,7 +1404,6 @@ static __exit void legacy_exit(void)
for (i = 0; i < nr_legacy_host; i++) {
struct legacy_data *ld = &legacy_data[i];
ata_host_detach(legacy_host[i]);
platform_device_unregister(ld->platform_dev);
if (ld->timing)
@ -962,9 +1422,9 @@ module_param(ht6560a, int, 0);
module_param(ht6560b, int, 0);
module_param(opti82c611a, int, 0);
module_param(opti82c46x, int, 0);
module_param(qdi, int, 0);
module_param(pio_mask, int, 0);
module_param(iordy_mask, int, 0);
module_init(legacy_init);
module_exit(legacy_exit);