korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-25 13:14:07 +08:00
Code Issues Packages Projects Releases Wiki Activity

ARM: SoC fixes for 5.13

Browse Source 
A set of fixes that have been coming in over the last few weeks, the
 usual mix of fixes:
 
  - DT fixups for TI K3
  - SATA drive detection fix for TI DRA7
  - Power management fixes and a few build warning removals for OMAP
  - OP-TEE fix to use standard API for UUID exporting
  - DT fixes for a handful of i.MX boards
  ... plus a few other smaller items
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAmC9IRYPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3m/sQAI8JaXHnUBbXAAn0ugMLaTfXA1FKI+in+O43
 xobyBwe6R4XNAr1GQvLYXF6vY3eaMHrcS/a1dU96uH7h3B8aq9ZR9DqrpJ5VNu37
 q55t+brJkEI8+t5u08u6jrxfVARu4FbyZB4jIkbIwxnyEynx/8Bl7sLYImOhspkb
 ipEkgPOSGcIDUcsI1eXIb6urQYkE0yssy20qNYFQ4neYS4Su4gy+LA2OTSqRHk/s
 uQtfJZGN9LbxUFJ4mho349hebjM3rjXw2ox9Znk4bIhBbW38sppjstQ8lhi5YhbW
 RlKDEIYcc/Fo/Hy1xoiAY2MZ7lMMUnXOEhMQmzQd1AZVNH0ysr8vuSEBy9mxF36r
 Jx3eXWDZulDnhM/3eA8GJg3o5kcCZcymFHxo2X0bMeiMlXZ77QP8XV5Y5/C6LQf3
 wJ4lncq0Q4wc9q7W2uGCq/JrMbJxOTjh6nbLlOIENHliRgwk48aoHY4RlOtKpws7
 82S/vCAAj/08mpV2AzZtTtUxIrvgJcdKm9freXZOoUp53yvHbltLZXm2bBrfLdh1
 qM0vT9+skUajxWXG0HpTNJSig3DeAMmfwC3As4kjibA8Jtr8y7249Z/xKPXJrZI+
 5lvi4S2AT/QJbER0jUe6nIamS9RIFnDy0+J0BPvfJ6VpDMIM18rn6M4iev0am9v7
 MDI6Mm2+
 =TbGI
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A set of fixes that have been coming in over the last few weeks, the
  usual mix of fixes:

   - DT fixups for TI K3

   - SATA drive detection fix for TI DRA7

   - Power management fixes and a few build warning removals for OMAP

   - OP-TEE fix to use standard API for UUID exporting

   - DT fixes for a handful of i.MX boards

  And a few other smaller items"

* tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  arm64: meson: select COMMON_CLK
  soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()
  ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
  bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
  ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
  ARM: dts: imx7d-pico: Fix the 'tuning-step' property
  ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
  arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
  arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
  ARM: imx: pm-imx27: Include "common.h"
  arm64: dts: zii-ultra: fix 12V_MAIN voltage
  arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
  arm64: dts: ls1028a: fix memory node
  bus: ti-sysc: Fix am335x resume hang for usb otg module
  ARM: OMAP2+: Fix build warning when mmc_omap is not built
  ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
  ARM: OMAP1: Fix use of possibly uninitialized irq variable
  optee: use export_uuid() to copy client UUID
  arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
  arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
  ...
This commit is contained in:
Linus Torvalds 2021-06-06 13:00:36 -07:00
commit decad3e1d1
31 changed files with 160 additions and 126 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
View File

@ -105,9 +105,13 @@
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-reset-duration = <20>;
phy-supply = <&sw2_reg>;
phy-handle = <&ethphy0>;
status = "okay";
fixed-link {
speed = <1000>;
full-duplex;
};
mdio {
#address-cells = <1>;
#size-cells = <0>;

12
arch/arm/boot/dts/imx6q-dhcom-som.dtsi
View File

@ -406,6 +406,18 @@
vin-supply = <&sw1_reg>;
};
&reg_pu {
vin-supply = <&sw1_reg>;
};
&reg_vdd1p1 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&sw2_reg>;
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;

2
arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
View File

@ -126,7 +126,7 @@
compatible = "nxp,pca8574";
reg = <0x3a>;
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
};
};

2
arch/arm/boot/dts/imx7d-meerkat96.dts
View File

@ -193,7 +193,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
keep-power-in-suspend;
tuning-step = <2>;
fsl,tuning-step = <2>;
vmmc-supply = <&reg_3p3v>;
no-1-8-v;
broken-cd;

2
arch/arm/boot/dts/imx7d-pico.dtsi
View File

@ -351,7 +351,7 @@
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
bus-width = <4>;
tuning-step = <2>;
fsl,tuning-step = <2>;
vmmc-supply = <&reg_3p3v>;
wakeup-source;
no-1-8-v;

1
arch/arm/mach-imx/pm-imx27.c
View File

@ -12,6 +12,7 @@
#include <linux/suspend.h>
#include <linux/io.h>
#include "common.h"
#include "hardware.h"
static int mx27_suspend_enter(suspend_state_t state)

14
arch/arm/mach-omap1/board-ams-delta.c
View File

@ -458,20 +458,6 @@ static struct gpiod_lookup_table leds_gpio_table = {
#ifdef CONFIG_LEDS_TRIGGERS
DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
static int ams_delta_camera_power(struct device *dev, int power)
{
/*
* turn on camera LED
*/
if (power)
led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
else
led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
return 0;
}
#else
#define ams_delta_camera_power NULL
#endif
static struct platform_device ams_delta_audio_device = {

2
arch/arm/mach-omap1/board-h2.c
View File

@ -394,6 +394,8 @@ static void __init h2_init(void)
BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
gpio_direction_input(H2_NAND_RB_GPIO_PIN);
gpiod_add_lookup_table(&isp1301_gpiod_table);
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);

8
arch/arm/mach-omap1/pm.c
View File

@ -655,9 +655,13 @@ static int __init omap_pm_init(void)
irq = INT_7XX_WAKE_UP_REQ;
else if (cpu_is_omap16xx())
irq = INT_1610_WAKE_UP_REQ;
if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
NULL))
else
irq = -1;
if (irq >= 0) {
if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", NULL))
pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
}
/* Program new power ramp-up time
* (0 for most boards since we don't lower voltage when in deep sleep)

2
arch/arm/mach-omap2/board-n8x0.c
View File

@ -322,6 +322,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
static void n8x0_mmc_callback(void *data, u8 card_mask)
{
#ifdef CONFIG_MMC_OMAP
int bit, *openp, index;
if (board_is_n800()) {
@ -339,7 +340,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
else
*openp = 0;
#ifdef CONFIG_MMC_OMAP
omap_mmc_notify_cover_event(mmc_device, index, *openp);
#else
pr_warn("MMC: notify cover event not available\n");

1
arch/arm64/Kconfig.platforms
View File

@ -165,6 +165,7 @@ config ARCH_MEDIATEK
config ARCH_MESON
bool "Amlogic Platforms"
select COMMON_CLK
select MESON_IRQ_GPIO
help
This enables support for the arm64 based Amlogic SoCs

3
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
View File

@ -46,7 +46,8 @@
eee-broken-100tx;
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
vddio-supply = <&vddh>;
qca,keep-pll-enabled;
vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-name = "VDDIO";

5
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
View File

@ -31,11 +31,10 @@
reg = <0x4>;
eee-broken-1000t;
eee-broken-100tx;
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
vddio-supply = <&vddh>;
qca,keep-pll-enabled;
vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-name = "VDDIO";

4
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
View File

@ -197,8 +197,8 @@
ddr: memory-controller@1080000 {
compatible = "fsl,qoriq-memory-controller";
reg = <0x0 0x1080000 0x0 0x1000>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
big-endian;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
little-endian;
};
dcfg: syscon@1e00000 {

10
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
View File

@ -88,11 +88,11 @@
pinctrl-0 = <&pinctrl_codec2>;
reg = <0x18>;
#sound-dai-cells = <0>;
HPVDD-supply = <&reg_3p3v>;
SPRVDD-supply = <&reg_3p3v>;
SPLVDD-supply = <&reg_3p3v>;
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
HPVDD-supply = <&reg_gen_3p3>;
SPRVDD-supply = <&reg_gen_3p3>;
SPLVDD-supply = <&reg_gen_3p3>;
AVDD-supply = <&reg_gen_3p3>;
IOVDD-supply = <&reg_gen_3p3>;
DVDD-supply = <&vgen4_reg>;
reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
};

23
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
View File

@ -45,8 +45,8 @@
reg_12p0_main: regulator-12p0-main {
compatible = "regulator-fixed";
regulator-name = "12V_MAIN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
};
@ -77,15 +77,6 @@
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
vin-supply = <&reg_3p3_main>;
regulator-name = "GEN_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usdhc2_vmmc: regulator-vsd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2>;
@ -415,11 +406,11 @@
pinctrl-0 = <&pinctrl_codec1>;
reg = <0x18>;
#sound-dai-cells = <0>;
HPVDD-supply = <&reg_3p3v>;
SPRVDD-supply = <&reg_3p3v>;
SPLVDD-supply = <&reg_3p3v>;
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
HPVDD-supply = <&reg_gen_3p3>;
SPRVDD-supply = <&reg_gen_3p3>;
SPLVDD-supply = <&reg_gen_3p3>;
AVDD-supply = <&reg_gen_3p3>;
IOVDD-supply = <&reg_gen_3p3>;
DVDD-supply = <&vgen4_reg>;
reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
};

11
arch/arm64/boot/dts/ti/k3-am64-main.dtsi
View File

@ -42,12 +42,12 @@
};
};
dmss: dmss {
dmss: bus@48000000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
dma-ranges;
ranges;
ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
ti,sci-dev-id = <25>;
@ -134,7 +134,7 @@
};
};
dmsc: dmsc@44043000 {
dmsc: system-controller@44043000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
mbox-names = "rx", "tx";
@ -148,7 +148,7 @@
#power-domain-cells = <2>;
};
k3_clks: clocks {
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
@ -373,8 +373,9 @@
clocks = <&k3_clks 145 0>;
};
main_gpio_intr: interrupt-controller0 {
main_gpio_intr: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
reg = <0x00 0x00a00000 0x00 0x800>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;

3
arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
View File

@ -74,8 +74,9 @@
clocks = <&k3_clks 148 0>;
};
mcu_gpio_intr: interrupt-controller1 {
mcu_gpio_intr: interrupt-controller@4210000 {
compatible = "ti,sci-intr";
reg = <0x00 0x04210000 0x00 0x200>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;

10
arch/arm64/boot/dts/ti/k3-am65-main.dtsi
View File

@ -433,8 +433,9 @@
#phy-cells = <0>;
};
intr_main_gpio: interrupt-controller0 {
intr_main_gpio: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
reg = <0x0 0x00a00000 0x0 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
@ -444,18 +445,19 @@
ti,interrupt-ranges = <0 392 32>;
};
main-navss {
main_navss: bus@30800000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
dma-coherent;
dma-ranges;
ti,sci-dev-id = <118>;
intr_main_navss: interrupt-controller1 {
intr_main_navss: interrupt-controller@310e0000 {
compatible = "ti,sci-intr";
reg = <0x0 0x310e0000 0x0 0x2000>;
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;

4
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
View File

@ -116,11 +116,11 @@
};
};
mcu-navss {
mcu_navss: bus@28380000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
dma-coherent;
dma-ranges;

13
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
View File

@ -6,24 +6,24 @@
*/
&cbass_wakeup {
dmsc: dmsc {
dmsc: system-controller@44083000 {
compatible = "ti,am654-sci";
ti,host-id = <12>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
mbox-names = "rx", "tx";
mboxes= <&secure_proxy_main 11>,
<&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x44083000 0x1000>;
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
#power-domain-cells = <2>;
};
k3_clks: clocks {
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
@ -69,8 +69,9 @@
power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
};
intr_wkup_gpio: interrupt-controller2 {
intr_wkup_gpio: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
reg = <0x42200000 0x200>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;

31
arch/arm64/boot/dts/ti/k3-am654-base-board.dts
View File

@ -85,12 +85,6 @@
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
};
};
clk_ov5640_fixed: clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
&wkup_pmx0 {
@ -287,23 +281,6 @@
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
ov5640: camera@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
clocks = <&clk_ov5640_fixed>;
clock-names = "xclk";
port {
csi2_cam0: endpoint {
remote-endpoint = <&csi2_phy0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
};
&main_i2c2 {
@ -496,14 +473,6 @@
};
};
&csi2_0 {
csi2_phy0: endpoint {
remote-endpoint = <&csi2_cam0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
&mcu_cpsw {
pinctrl-names = "default";
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;

8
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
View File

@ -68,8 +68,9 @@
};
};
main_gpio_intr: interrupt-controller0 {
main_gpio_intr: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
reg = <0x00 0x00a00000 0x00 0x800>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
@ -85,9 +86,12 @@
#size-cells = <2>;
ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
ti,sci-dev-id = <199>;
dma-coherent;
dma-ranges;
main_navss_intr: interrupt-controller1 {
main_navss_intr: interrupt-controller@310e0000 {
compatible = "ti,sci-intr";
reg = <0x00 0x310e0000 0x00 0x4000>;
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;

7
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
View File

@ -6,7 +6,7 @@
*/
&cbass_mcu_wakeup {
dmsc: dmsc@44083000 {
dmsc: system-controller@44083000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
@ -23,7 +23,7 @@
#power-domain-cells = <2>;
};
k3_clks: clocks {
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
@ -96,8 +96,9 @@
clock-names = "fclk";
};
wkup_gpio_intr: interrupt-controller2 {
wkup_gpio_intr: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
reg = <0x00 0x42200000 0x00 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;

10
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
View File

@ -76,8 +76,9 @@
};
};
main_gpio_intr: interrupt-controller0 {
main_gpio_intr: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
reg = <0x00 0x00a00000 0x00 0x800>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
@ -87,18 +88,19 @@
ti,interrupt-ranges = <8 392 56>;
};
main-navss {
main_navss: bus@30000000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
dma-coherent;
dma-ranges;
ti,sci-dev-id = <199>;
main_navss_intr: interrupt-controller1 {
main_navss_intr: interrupt-controller@310e0000 {
compatible = "ti,sci-intr";
reg = <0x0 0x310e0000 0x0 0x4000>;
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;

11
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
View File

@ -6,7 +6,7 @@
*/
&cbass_mcu_wakeup {
dmsc: dmsc@44083000 {
dmsc: system-controller@44083000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
@ -23,7 +23,7 @@
#power-domain-cells = <2>;
};
k3_clks: clocks {
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
@ -96,8 +96,9 @@
clock-names = "fclk";
};
wkup_gpio_intr: interrupt-controller2 {
wkup_gpio_intr: interrupt-controller@42200000 {
compatible = "ti,sci-intr";
reg = <0x00 0x42200000 0x00 0x400>;
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
@ -249,11 +250,11 @@
};
};
mcu-navss {
mcu_navss: bus@28380000 {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
dma-coherent;
dma-ranges;

60
drivers/bus/ti-sysc.c
View File

@ -1334,6 +1334,34 @@ err_allow_idle:
return error;
}
static int sysc_reinit_module(struct sysc *ddata, bool leave_enabled)
{
struct device *dev = ddata->dev;
int error;
/* Disable target module if it is enabled */
if (ddata->enabled) {
error = sysc_runtime_suspend(dev);
if (error)
dev_warn(dev, "reinit suspend failed: %i\n", error);
}
/* Enable target module */
error = sysc_runtime_resume(dev);
if (error)
dev_warn(dev, "reinit resume failed: %i\n", error);
if (leave_enabled)
return error;
/* Disable target module if no leave_enabled was set */
error = sysc_runtime_suspend(dev);
if (error)
dev_warn(dev, "reinit suspend failed: %i\n", error);
return error;
}
static int __maybe_unused sysc_noirq_suspend(struct device *dev)
{
struct sysc *ddata;
@ -1344,12 +1372,18 @@ static int __maybe_unused sysc_noirq_suspend(struct device *dev)
(SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE))
return 0;
return pm_runtime_force_suspend(dev);
if (!ddata->enabled)
return 0;
ddata->needs_resume = 1;
return sysc_runtime_suspend(dev);
}
static int __maybe_unused sysc_noirq_resume(struct device *dev)
{
struct sysc *ddata;
int error = 0;
ddata = dev_get_drvdata(dev);
@ -1357,7 +1391,19 @@ static int __maybe_unused sysc_noirq_resume(struct device *dev)
(SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE))
return 0;
return pm_runtime_force_resume(dev);
if (ddata->cfg.quirks & SYSC_QUIRK_REINIT_ON_RESUME) {
error = sysc_reinit_module(ddata, ddata->needs_resume);
if (error)
dev_warn(dev, "noirq_resume failed: %i\n", error);
} else if (ddata->needs_resume) {
error = sysc_runtime_resume(dev);
if (error)
dev_warn(dev, "noirq_resume failed: %i\n", error);
}
ddata->needs_resume = 0;
return error;
}
static const struct dev_pm_ops sysc_pm_ops = {
@ -1408,9 +1454,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
/* Uarts on omap4 and later */
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff,
SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
/* Quirks that need to be set based on the module address */
SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
@ -1459,6 +1505,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("tptc", 0, 0, -ENODEV, -ENODEV, 0x40007c00, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, 0x14, 0x50700100, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, -ENODEV, 0x50700101, 0xffffffff,
@ -1466,7 +1514,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("usb_otg_hs", 0, 0x400, 0x404, 0x408, 0x00000050,
0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("usb_otg_hs", 0, 0, 0x10, -ENODEV, 0x4ea2080d, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY |
SYSC_QUIRK_REINIT_ON_RESUME),
SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
SYSC_MODULE_QUIRK_WDT),
/* PRUSS on am3, am4 and am5 */
@ -1524,7 +1573,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000400, 0xffffffff, 0),
SYSC_QUIRK("rfbi", 0x4832a800, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
SYSC_QUIRK("rfbi", 0x58002000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4e8b0100, 0xffffffff, 0),
SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4f000100, 0xffffffff, 0),

4
drivers/soc/amlogic/meson-clk-measure.c
View File

@ -626,10 +626,8 @@ static int meson_msr_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base)) {
dev_err(&pdev->dev, "io resource mapping failed\n");
if (IS_ERR(base))
return PTR_ERR(base);
}
priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
&meson_clk_msr_regmap_config);

6
drivers/tee/optee/call.c
View File

@ -220,6 +220,7 @@ int optee_open_session(struct tee_context *ctx,
struct optee_msg_arg *msg_arg;
phys_addr_t msg_parg;
struct optee_session *sess = NULL;
uuid_t client_uuid;
/* +2 for the meta parameters added below */
shm = get_msg_arg(ctx, arg->num_params + 2, &msg_arg, &msg_parg);
@ -240,10 +241,11 @@ int optee_open_session(struct tee_context *ctx,
memcpy(&msg_arg->params[0].u.value, arg->uuid, sizeof(arg->uuid));
msg_arg->params[1].u.value.c = arg->clnt_login;
rc = tee_session_calc_client_uuid((uuid_t *)&msg_arg->params[1].u.value,
arg->clnt_login, arg->clnt_uuid);
rc = tee_session_calc_client_uuid(&client_uuid, arg->clnt_login,
arg->clnt_uuid);
if (rc)
goto out;
export_uuid(msg_arg->params[1].u.octets, &client_uuid);
rc = optee_to_msg_param(msg_arg->params + 2, arg->num_params, param);
if (rc)

6
drivers/tee/optee/optee_msg.h
View File

@ -9,7 +9,7 @@
#include <linux/types.h>
/*
* This file defines the OP-TEE message protocol used to communicate
* This file defines the OP-TEE message protocol (ABI) used to communicate
* with an instance of OP-TEE running in secure world.
*
* This file is divided into two sections.
@ -144,9 +144,10 @@ struct optee_msg_param_value {
* @tmem: parameter by temporary memory reference
* @rmem: parameter by registered memory reference
* @value: parameter by opaque value
* @octets: parameter by octet string
*
* @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in
* the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value,
* the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value or octets,
* OPTEE_MSG_ATTR_TYPE_TMEM_* indicates @tmem and
* OPTEE_MSG_ATTR_TYPE_RMEM_* indicates @rmem,
* OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used.
@ -157,6 +158,7 @@ struct optee_msg_param {
struct optee_msg_param_tmem tmem;
struct optee_msg_param_rmem rmem;
struct optee_msg_param_value value;
u8 octets[24];
} u;
};

1
include/linux/platform_data/ti-sysc.h
View File

@ -50,6 +50,7 @@ struct sysc_regbits {
s8 emufree_shift;
};
#define SYSC_QUIRK_REINIT_ON_RESUME BIT(27)
#define SYSC_QUIRK_GPMC_DEBUG BIT(26)
#define SYSC_MODULE_QUIRK_ENA_RESETDONE BIT(25)
#define SYSC_MODULE_QUIRK_PRUSS BIT(24)