Suspend-related patches for 2.6.27

ACPI PM: Add possibility to change suspend sequence

There are some systems out there that don't work correctly with
our current suspend/hibernation code ordering.  Provide a workaround
for these systems allowing them to pass 'acpi_sleep=old_ordering' in
the kernel command line so that it will use the pre-ACPI 2.0 ("old")
suspend code ordering.

Unfortunately, this requires us to add a platform hook to the
resuming of devices for recovering the platform in case one of the
device drivers' .suspend() routines returns error code.  Namely,
ACPI 1.0 specifies that _PTS should be called before suspending
devices, but _WAK still should be called before resuming them in
order to undo the changes made by _PTS.  However, if there is an
error during suspending devices, they are automatically resumed
without returning control to the PM core, so the _WAK has to be
called from within device_resume() in that cases.

The patch also reorders and refactors the ACPI suspend/hibernation
code to avoid duplication as far as reasonably possible.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This commit is contained in:
Rafael J. Wysocki 2008-06-12 23:24:06 +02:00 committed by Jesse Barnes
parent 53eb2fbeb9
commit d8f3de0d24
8 changed files with 217 additions and 128 deletions

View File

@ -147,10 +147,14 @@ and is between 256 and 4096 characters. It is defined in the file
default: 0
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode, s3_beep }
Format: { s3_bios, s3_mode, s3_beep, old_ordering }
See Documentation/power/video.txt for s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
as soon as the kernel's real-mode entry point is called.
old_ordering causes the ACPI 1.0 ordering of the _PTS
control method, wrt putting devices into low power
states, to be enforced (the ACPI 2.0 ordering of _PTS is
used by default).
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }

View File

@ -124,6 +124,8 @@ static int __init acpi_sleep_setup(char *str)
acpi_realmode_flags |= 2;
if (strncmp(str, "s3_beep", 7) == 0)
acpi_realmode_flags |= 4;
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
str = strchr(str, ',');
if (str != NULL)
str += strspn(str, ", \t");

View File

@ -24,10 +24,6 @@
u8 sleep_states[ACPI_S_STATE_COUNT];
#ifdef CONFIG_PM_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
#endif
static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
@ -50,9 +46,96 @@ static int acpi_sleep_prepare(u32 acpi_state)
return 0;
}
#ifdef CONFIG_SUSPEND
static struct platform_suspend_ops acpi_suspend_ops;
#ifdef CONFIG_PM_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
/*
* ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
* user to request that behavior by using the 'acpi_old_suspend_ordering'
* kernel command line option that causes the following variable to be set.
*/
static bool old_suspend_ordering;
void __init acpi_old_suspend_ordering(void)
{
old_suspend_ordering = true;
}
/**
* acpi_pm_disable_gpes - Disable the GPEs.
*/
static int acpi_pm_disable_gpes(void)
{
acpi_hw_disable_all_gpes();
return 0;
}
/**
* __acpi_pm_prepare - Prepare the platform to enter the target state.
*
* If necessary, set the firmware waking vector and do arch-specific
* nastiness to get the wakeup code to the waking vector.
*/
static int __acpi_pm_prepare(void)
{
int error = acpi_sleep_prepare(acpi_target_sleep_state);
if (error)
acpi_target_sleep_state = ACPI_STATE_S0;
return error;
}
/**
* acpi_pm_prepare - Prepare the platform to enter the target sleep
* state and disable the GPEs.
*/
static int acpi_pm_prepare(void)
{
int error = __acpi_pm_prepare();
if (!error)
acpi_hw_disable_all_gpes();
return error;
}
/**
* acpi_pm_finish - Instruct the platform to leave a sleep state.
*
* This is called after we wake back up (or if entering the sleep state
* failed).
*/
static void acpi_pm_finish(void)
{
u32 acpi_state = acpi_target_sleep_state;
if (acpi_state == ACPI_STATE_S0)
return;
printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
acpi_state);
acpi_disable_wakeup_device(acpi_state);
acpi_leave_sleep_state(acpi_state);
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
}
/**
* acpi_pm_end - Finish up suspend sequence.
*/
static void acpi_pm_end(void)
{
/*
* This is necessary in case acpi_pm_finish() is not called during a
* failing transition to a sleep state.
*/
acpi_target_sleep_state = ACPI_STATE_S0;
}
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_SUSPEND
extern void do_suspend_lowlevel(void);
static u32 acpi_suspend_states[] = {
@ -66,7 +149,6 @@ static u32 acpi_suspend_states[] = {
* acpi_suspend_begin - Set the target system sleep state to the state
* associated with given @pm_state, if supported.
*/
static int acpi_suspend_begin(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
@ -82,25 +164,6 @@ static int acpi_suspend_begin(suspend_state_t pm_state)
return error;
}
/**
* acpi_suspend_prepare - Do preliminary suspend work.
*
* If necessary, set the firmware waking vector and do arch-specific
* nastiness to get the wakeup code to the waking vector.
*/
static int acpi_suspend_prepare(void)
{
int error = acpi_sleep_prepare(acpi_target_sleep_state);
if (error) {
acpi_target_sleep_state = ACPI_STATE_S0;
return error;
}
return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
}
/**
* acpi_suspend_enter - Actually enter a sleep state.
* @pm_state: ignored
@ -109,7 +172,6 @@ static int acpi_suspend_prepare(void)
* assembly, which in turn call acpi_enter_sleep_state().
* It's unfortunate, but it works. Please fix if you're feeling frisky.
*/
static int acpi_suspend_enter(suspend_state_t pm_state)
{
acpi_status status = AE_OK;
@ -166,39 +228,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
/**
* acpi_suspend_finish - Instruct the platform to leave a sleep state.
*
* This is called after we wake back up (or if entering the sleep state
* failed).
*/
static void acpi_suspend_finish(void)
{
u32 acpi_state = acpi_target_sleep_state;
acpi_disable_wakeup_device(acpi_state);
acpi_leave_sleep_state(acpi_state);
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
}
/**
* acpi_suspend_end - Finish up suspend sequence.
*/
static void acpi_suspend_end(void)
{
/*
* This is necessary in case acpi_suspend_finish() is not called during a
* failing transition to a sleep state.
*/
acpi_target_sleep_state = ACPI_STATE_S0;
}
static int acpi_suspend_state_valid(suspend_state_t pm_state)
{
u32 acpi_state;
@ -218,10 +247,39 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state)
static struct platform_suspend_ops acpi_suspend_ops = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin,
.prepare = acpi_suspend_prepare,
.prepare = acpi_pm_prepare,
.enter = acpi_suspend_enter,
.finish = acpi_suspend_finish,
.end = acpi_suspend_end,
.finish = acpi_pm_finish,
.end = acpi_pm_end,
};
/**
* acpi_suspend_begin_old - Set the target system sleep state to the
* state associated with given @pm_state, if supported, and
* execute the _PTS control method. This function is used if the
* pre-ACPI 2.0 suspend ordering has been requested.
*/
static int acpi_suspend_begin_old(suspend_state_t pm_state)
{
int error = acpi_suspend_begin(pm_state);
if (!error)
error = __acpi_pm_prepare();
return error;
}
/*
* The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
* been requested.
*/
static struct platform_suspend_ops acpi_suspend_ops_old = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin_old,
.prepare = acpi_pm_disable_gpes,
.enter = acpi_suspend_enter,
.finish = acpi_pm_finish,
.end = acpi_pm_end,
.recover = acpi_pm_finish,
};
#endif /* CONFIG_SUSPEND */
@ -229,22 +287,9 @@ static struct platform_suspend_ops acpi_suspend_ops = {
static int acpi_hibernation_begin(void)
{
acpi_target_sleep_state = ACPI_STATE_S4;
return 0;
}
static int acpi_hibernation_prepare(void)
{
int error = acpi_sleep_prepare(ACPI_STATE_S4);
if (error) {
acpi_target_sleep_state = ACPI_STATE_S0;
return error;
}
return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
}
static int acpi_hibernation_enter(void)
{
acpi_status status = AE_OK;
@ -274,52 +319,55 @@ static void acpi_hibernation_leave(void)
acpi_leave_sleep_state_prep(ACPI_STATE_S4);
}
static void acpi_hibernation_finish(void)
{
acpi_disable_wakeup_device(ACPI_STATE_S4);
acpi_leave_sleep_state(ACPI_STATE_S4);
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
}
static void acpi_hibernation_end(void)
{
/*
* This is necessary in case acpi_hibernation_finish() is not called
* during a failing transition to the sleep state.
*/
acpi_target_sleep_state = ACPI_STATE_S0;
}
static int acpi_hibernation_pre_restore(void)
{
acpi_status status;
status = acpi_hw_disable_all_gpes();
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
static void acpi_hibernation_restore_cleanup(void)
static void acpi_pm_enable_gpes(void)
{
acpi_hw_enable_all_runtime_gpes();
}
static struct platform_hibernation_ops acpi_hibernation_ops = {
.begin = acpi_hibernation_begin,
.end = acpi_hibernation_end,
.pre_snapshot = acpi_hibernation_prepare,
.finish = acpi_hibernation_finish,
.prepare = acpi_hibernation_prepare,
.end = acpi_pm_end,
.pre_snapshot = acpi_pm_prepare,
.finish = acpi_pm_finish,
.prepare = acpi_pm_prepare,
.enter = acpi_hibernation_enter,
.leave = acpi_hibernation_leave,
.pre_restore = acpi_hibernation_pre_restore,
.restore_cleanup = acpi_hibernation_restore_cleanup,
.pre_restore = acpi_pm_disable_gpes,
.restore_cleanup = acpi_pm_enable_gpes,
};
#endif /* CONFIG_HIBERNATION */
/**
* acpi_hibernation_begin_old - Set the target system sleep state to
* ACPI_STATE_S4 and execute the _PTS control method. This
* function is used if the pre-ACPI 2.0 suspend ordering has been
* requested.
*/
static int acpi_hibernation_begin_old(void)
{
int error = acpi_sleep_prepare(ACPI_STATE_S4);
if (!error)
acpi_target_sleep_state = ACPI_STATE_S4;
return error;
}
/*
* The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
* been requested.
*/
static struct platform_hibernation_ops acpi_hibernation_ops_old = {
.begin = acpi_hibernation_begin_old,
.end = acpi_pm_end,
.pre_snapshot = acpi_pm_disable_gpes,
.finish = acpi_pm_finish,
.prepare = acpi_pm_disable_gpes,
.enter = acpi_hibernation_enter,
.leave = acpi_hibernation_leave,
.pre_restore = acpi_pm_disable_gpes,
.restore_cleanup = acpi_pm_enable_gpes,
.recover = acpi_pm_finish,
};
#endif /* CONFIG_HIBERNATION */
int acpi_suspend(u32 acpi_state)
{
@ -461,13 +509,15 @@ int __init acpi_sleep_init(void)
}
}
suspend_set_ops(&acpi_suspend_ops);
suspend_set_ops(old_suspend_ordering ?
&acpi_suspend_ops_old : &acpi_suspend_ops);
#endif
#ifdef CONFIG_HIBERNATION
status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
if (ACPI_SUCCESS(status)) {
hibernation_set_ops(&acpi_hibernation_ops);
hibernation_set_ops(old_suspend_ordering ?
&acpi_hibernation_ops_old : &acpi_hibernation_ops);
sleep_states[ACPI_STATE_S4] = 1;
printk(" S4");
}

View File

@ -781,8 +781,6 @@ int device_suspend(pm_message_t state)
error = dpm_prepare(state);
if (!error)
error = dpm_suspend(state);
if (error)
device_resume(resume_event(state));
return error;
}
EXPORT_SYMBOL_GPL(device_suspend);

View File

@ -234,6 +234,9 @@ int acpi_check_region(resource_size_t start, resource_size_t n,
int acpi_check_mem_region(resource_size_t start, resource_size_t n,
const char *name);
#ifdef CONFIG_PM_SLEEP
void __init acpi_old_suspend_ordering(void);
#endif /* CONFIG_PM_SLEEP */
#else /* CONFIG_ACPI */
static inline int early_acpi_boot_init(void)

View File

@ -86,6 +86,11 @@ typedef int __bitwise suspend_state_t;
* that implement @begin(), but platforms implementing @begin() should
* also provide a @end() which cleans up transitions aborted before
* @enter().
*
* @recover: Recover the platform from a suspend failure.
* Called by the PM core if the suspending of devices fails.
* This callback is optional and should only be implemented by platforms
* which require special recovery actions in that situation.
*/
struct platform_suspend_ops {
int (*valid)(suspend_state_t state);
@ -94,6 +99,7 @@ struct platform_suspend_ops {
int (*enter)(suspend_state_t state);
void (*finish)(void);
void (*end)(void);
void (*recover)(void);
};
#ifdef CONFIG_SUSPEND
@ -149,7 +155,7 @@ extern void mark_free_pages(struct zone *zone);
* The methods in this structure allow a platform to carry out special
* operations required by it during a hibernation transition.
*
* All the methods below must be implemented.
* All the methods below, except for @recover(), must be implemented.
*
* @begin: Tell the platform driver that we're starting hibernation.
* Called right after shrinking memory and before freezing devices.
@ -189,6 +195,11 @@ extern void mark_free_pages(struct zone *zone);
* @restore_cleanup: Clean up after a failing image restoration.
* Called right after the nonboot CPUs have been enabled and before
* thawing devices (runs with IRQs on).
*
* @recover: Recover the platform from a failure to suspend devices.
* Called by the PM core if the suspending of devices during hibernation
* fails. This callback is optional and should only be implemented by
* platforms which require special recovery actions in that situation.
*/
struct platform_hibernation_ops {
int (*begin)(void);
@ -200,6 +211,7 @@ struct platform_hibernation_ops {
void (*leave)(void);
int (*pre_restore)(void);
void (*restore_cleanup)(void);
void (*recover)(void);
};
#ifdef CONFIG_HIBERNATION

View File

@ -179,6 +179,17 @@ static void platform_restore_cleanup(int platform_mode)
hibernation_ops->restore_cleanup();
}
/**
* platform_recover - recover the platform from a failure to suspend
* devices.
*/
static void platform_recover(int platform_mode)
{
if (platform_mode && hibernation_ops && hibernation_ops->recover)
hibernation_ops->recover();
}
/**
* create_image - freeze devices that need to be frozen with interrupts
* off, create the hibernation image and thaw those devices. Control
@ -258,10 +269,10 @@ int hibernation_snapshot(int platform_mode)
suspend_console();
error = device_suspend(PMSG_FREEZE);
if (error)
goto Resume_console;
goto Recover_platform;
if (hibernation_test(TEST_DEVICES))
goto Resume_devices;
goto Recover_platform;
error = platform_pre_snapshot(platform_mode);
if (error || hibernation_test(TEST_PLATFORM))
@ -285,11 +296,14 @@ int hibernation_snapshot(int platform_mode)
Resume_devices:
device_resume(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
Resume_console:
resume_console();
Close:
platform_end(platform_mode);
return error;
Recover_platform:
platform_recover(platform_mode);
goto Resume_devices;
}
/**
@ -398,8 +412,11 @@ int hibernation_platform_enter(void)
suspend_console();
error = device_suspend(PMSG_HIBERNATE);
if (error)
goto Resume_console;
if (error) {
if (hibernation_ops->recover)
hibernation_ops->recover();
goto Resume_devices;
}
error = hibernation_ops->prepare();
if (error)
@ -428,7 +445,6 @@ int hibernation_platform_enter(void)
hibernation_ops->finish();
Resume_devices:
device_resume(PMSG_RESTORE);
Resume_console:
resume_console();
Close:
hibernation_ops->end();

View File

@ -269,11 +269,11 @@ int suspend_devices_and_enter(suspend_state_t state)
error = device_suspend(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to suspend\n");
goto Resume_console;
goto Recover_platform;
}
if (suspend_test(TEST_DEVICES))
goto Resume_devices;
goto Recover_platform;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
@ -294,12 +294,16 @@ int suspend_devices_and_enter(suspend_state_t state)
suspend_ops->finish();
Resume_devices:
device_resume(PMSG_RESUME);
Resume_console:
resume_console();
Close:
if (suspend_ops->end)
suspend_ops->end();
return error;
Recover_platform:
if (suspend_ops->recover)
suspend_ops->recover();
goto Resume_devices;
}
/**