From 13399ff25f179811ce9c1df1523eb39f9e4a4772 Mon Sep 17 00:00:00 2001 From: Tomasz Duszynski Date: Mon, 28 May 2018 17:38:59 +0200 Subject: [PATCH 1/7] iio: pressure: bmp280: fix relative humidity unit According to IIO ABI relative humidity reading should be returned in milli percent. This patch addresses that by applying proper scaling and returning integer instead of fractional format type specifier. Note that the fixes tag is before the driver was heavily refactored to introduce spi support, so the patch won't apply that far back. Signed-off-by: Tomasz Duszynski Fixes: 14beaa8f5ab1 ("iio: pressure: bmp280: add humidity support") Acked-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 5ec3e41b65f2..fe87d27779d9 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -415,10 +415,9 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) } comp_humidity = bmp280_compensate_humidity(data, adc_humidity); - *val = comp_humidity; - *val2 = 1024; + *val = comp_humidity * 1000 / 1024; - return IIO_VAL_FRACTIONAL; + return IIO_VAL_INT; } static int bmp280_read_raw(struct iio_dev *indio_dev, From 288320f6e9a254bb595b4783c9bdfcc7c0e73153 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 30 May 2018 19:19:36 +0100 Subject: [PATCH 2/7] iio: tsl2x7x/tsl2772: avoid potential division by zero It may be possible for tsl2772_get_lux to return a zero lux value and hence a division by zero can occur when lux_val is zero. Check for this case and return -ERANGE to avoid the division by zero. Detected by CoverityScan, CID#1469484 ("Division or modulo by zero") Signed-off-by: Colin Ian King Acked-by: Brian Masney Signed-off-by: Jonathan Cameron --- drivers/iio/light/tsl2772.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c index 34d42a2504c9..df5b2a0da96c 100644 --- a/drivers/iio/light/tsl2772.c +++ b/drivers/iio/light/tsl2772.c @@ -582,6 +582,8 @@ static int tsl2772_als_calibrate(struct iio_dev *indio_dev) "%s: failed to get lux\n", __func__); return lux_val; } + if (lux_val == 0) + return -ERANGE; ret = (chip->settings.als_cal_target * chip->settings.als_gain_trim) / lux_val; From b02ec67a8e38875cdc5f9214be885022f11c0017 Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Thu, 7 Jun 2018 21:52:50 +0300 Subject: [PATCH 3/7] iio: mma8452: Fix ignoring MMA8452_INT_DRDY Interrupts are ignored if no event bit is set in the status status register and this breaks the buffer interface. No data is shown when running "iio_generic_buffer -n mma8451 -a" and interrupt counts go crazy. Fix by not returning IRQ_NONE if DRDY is set. Fixes: 605f72de137a ("iio: accel: mma8452: improvements to handle multiple events") Signed-off-by: Leonard Crestez cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma8452.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 7e3d82cff3d5..c149c9c360fc 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1053,7 +1053,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p) if (src < 0) return IRQ_NONE; - if (!(src & data->chip_info->enabled_events)) + if (!(src & (data->chip_info->enabled_events | MMA8452_INT_DRDY))) return IRQ_NONE; if (src & MMA8452_INT_DRDY) { From 92397a6c38d139d50fabbe9e2dc09b61d53b2377 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 5 Jun 2018 14:15:10 +0800 Subject: [PATCH 4/7] iio: buffer: fix the function signature to match implementation linux/iio/buffer-dma.h was not updated to when length was changed to unsigned int. Fixes: c043ec1ca5ba ("iio:buffer: make length types match kfifo types") Signed-off-by: Phil Reid Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer-dma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h index 767467d886de..67c75372b691 100644 --- a/include/linux/iio/buffer-dma.h +++ b/include/linux/iio/buffer-dma.h @@ -141,7 +141,7 @@ int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n, char __user *user_buffer); size_t iio_dma_buffer_data_available(struct iio_buffer *buffer); int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd); -int iio_dma_buffer_set_length(struct iio_buffer *buffer, int length); +int iio_dma_buffer_set_length(struct iio_buffer *buffer, unsigned int length); int iio_dma_buffer_request_update(struct iio_buffer *buffer); int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, From 2a221c04228bbf683fc8d3cb5d177aebb38b393c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 18 Jun 2018 18:09:36 +0200 Subject: [PATCH 5/7] iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines Commit 5ec6486daa98 ("iio:imu: inv_mpu6050: support more interrupt types") causes inv_mpu_core_probe() to fail if the IRQ does not have a trigger-type setup. This happens on machines where the mpu6050 is enumerated through ACPI and an older Interrupt type ACPI resource is used for the interrupt, rather then a GpioInt type type, causing the mpu6050 driver to no longer work there. This happens on e.g. the Asus T100TA. This commits makes the mpu6050 fallback to the old IRQF_TRIGGER_RISING default if the irq-type is not setup, fixing this. Signed-off-by: Hans de Goede Fixes: 5ec6486daa98 ("iio:imu: inv_mpu6050: support more interrupt types") Reviewed-by: Martin Kelly Reviewed-by: Jean-Baptiste Maneyrol Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index f9c0624505a2..42618fe4f83e 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -959,6 +959,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, } irq_type = irqd_get_trigger_type(desc); + if (!irq_type) + irq_type = IRQF_TRIGGER_RISING; if (irq_type == IRQF_TRIGGER_RISING) st->irq_mask = INV_MPU6050_ACTIVE_HIGH; else if (irq_type == IRQF_TRIGGER_FALLING) From 1376b0a2160319125c3a2822e8c09bd283cd8141 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 5 Jun 2018 12:36:30 +0300 Subject: [PATCH 6/7] staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write() There is a '>' vs '<' typo so this loop is a no-op. Fixes: d35dcc89fc93 ("staging: comedi: quatech_daqp_cs: fix daqp_ao_insn_write()") Signed-off-by: Dan Carpenter Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index ea194aa01a64..257b0daff01f 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -642,7 +642,7 @@ static int daqp_ao_insn_write(struct comedi_device *dev, /* Make sure D/A update mode is direct update */ outb(0, dev->iobase + DAQP_AUX_REG); - for (i = 0; i > insn->n; i++) { + for (i = 0; i < insn->n; i++) { unsigned int val = data[i]; int ret; From 0a2bc00341dcfcc793c0dbf4f8d43adf60458b05 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Mon, 11 Jun 2018 11:06:53 -0700 Subject: [PATCH 7/7] staging: android: ion: Return an ERR_PTR in ion_map_kernel The expected return value from ion_map_kernel is an ERR_PTR. The error path for a vmalloc failure currently just returns NULL, triggering a warning in ion_buffer_kmap_get. Encode the vmalloc failure as an ERR_PTR. Reported-by: syzbot+55b1d9f811650de944c6@syzkaller.appspotmail.com Signed-off-by: Laura Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/ion/ion_heap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c index e8c440329708..31db510018a9 100644 --- a/drivers/staging/android/ion/ion_heap.c +++ b/drivers/staging/android/ion/ion_heap.c @@ -30,7 +30,7 @@ void *ion_heap_map_kernel(struct ion_heap *heap, struct page **tmp = pages; if (!pages) - return NULL; + return ERR_PTR(-ENOMEM); if (buffer->flags & ION_FLAG_CACHED) pgprot = PAGE_KERNEL;