From d7356256488c544b8fdc2c3a775ce069546d7933 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 Feb 2017 10:23:13 +0000 Subject: [PATCH] serial: st-asc: (De)Register GPIOD and swap Pinctrl profiles When hardware flow-control is disabled, manual toggling of the UART's reset line (RTS) using userland applications (e.g. stty) is not possible, since the ASC IP does not provide this functionality in the same was as some other IPs do. Thus, we have to do this manually. This patch ensures that when HW flow-control is disabled the RTS/CTS lines are free to be registered via the GPIO API. It also ensures any registered GPIO lines are unregistered when HW flow-control is requested, allowing the IP to control them automatically. Acked-by: Peter Griffin Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/st-asc.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 105802099e47..e521078572b5 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -513,6 +513,8 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { struct asc_port *ascport = to_asc_port(port); + struct device_node *np = port->dev->of_node; + struct gpio_desc *gpiod; unsigned int baud; u32 ctrl_val; tcflag_t cflag; @@ -556,9 +558,32 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios, ctrl_val |= ASC_CTL_PARITYODD; /* hardware flow control */ - if ((cflag & CRTSCTS)) + if ((cflag & CRTSCTS)) { ctrl_val |= ASC_CTL_CTSENABLE; + /* If flow-control selected, stop handling RTS manually */ + if (ascport->rts) { + devm_gpiod_put(port->dev, ascport->rts); + ascport->rts = NULL; + + pinctrl_select_state(ascport->pinctrl, + ascport->states[DEFAULT]); + } + } else { + /* If flow-control disabled, it's safe to handle RTS manually */ + if (!ascport->rts && ascport->states[NO_HW_FLOWCTRL]) { + pinctrl_select_state(ascport->pinctrl, + ascport->states[NO_HW_FLOWCTRL]); + + gpiod = devm_get_gpiod_from_child(port->dev, "rts", + &np->fwnode); + if (!IS_ERR(gpiod)) { + gpiod_direction_output(gpiod, 0); + ascport->rts = gpiod; + } + } + } + if ((baud < 19200) && !ascport->force_m1) { asc_out(port, ASC_BAUDRATE, (port->uartclk / (16 * baud))); } else {