diff --git a/Documentation/devicetree/bindings/video/ti,dra7-dss.txt b/Documentation/devicetree/bindings/video/ti,dra7-dss.txt
new file mode 100644
index 000000000000..f33a05137b0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,dra7-dss.txt
@@ -0,0 +1,69 @@
+Texas Instruments DRA7x Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,dra7-dss"
+- reg: address and length of the register spaces for 'dss'
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+- syscon: phandle to control module core syscon node
+
+Optional properties:
+
+Some DRA7xx SoCs have one dedicated video PLL, some have two. These properties
+can be used to describe the video PLLs:
+
+- reg: address and length of the register spaces for 'pll1_clkctrl',
+  'pll1', 'pll2_clkctrl', 'pll2'
+- clocks: handle to video1 pll clock and video2 pll clock
+- clock-names: "video1_clk" and "video2_clk"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,dra7-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,dra7-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt
new file mode 100644
index 000000000000..f96083c0bd17
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,opa362.txt
@@ -0,0 +1,38 @@
+OPA362 analog video amplifier
+
+Required properties:
+- compatible: "ti,opa362"
+- enable-gpios: enable/disable output gpio
+
+Required node:
+- Video port 0 for opa362 input
+- Video port 1 for opa362 output
+
+Example:
+
+tv_amp: opa362 {
+	compatible = "ti,opa362";
+	enable-gpios = <&gpio1 23 0>;  /* GPIO to enable video out amplifier */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			opa_in: endpoint@0 {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			opa_out: endpoint@0 {
+				remote-endpoint = <&tv_connector_in>;
+			};
+		};
+	};
+};
+
+
+
diff --git a/drivers/video/fbdev/omap2/displays-new/Kconfig b/drivers/video/fbdev/omap2/displays-new/Kconfig
index e6cfc38160d3..574710141a61 100644
--- a/drivers/video/fbdev/omap2/displays-new/Kconfig
+++ b/drivers/video/fbdev/omap2/displays-new/Kconfig
@@ -1,6 +1,12 @@
 menu "OMAP Display Device Drivers (new device model)"
         depends on OMAP2_DSS
 
+config DISPLAY_ENCODER_OPA362
+	tristate "OPA362 external analog amplifier"
+	help
+	  Driver for OPA362 external analog TV amplifier controlled
+	  through a GPIO.
+
 config DISPLAY_ENCODER_TFP410
         tristate "TFP410 DPI to DVI Encoder"
 	help
diff --git a/drivers/video/fbdev/omap2/displays-new/Makefile b/drivers/video/fbdev/omap2/displays-new/Makefile
index 0323a8a1c682..9aa176bfbf2e 100644
--- a/drivers/video/fbdev/omap2/displays-new/Makefile
+++ b/drivers/video/fbdev/omap2/displays-new/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_DISPLAY_ENCODER_OPA362) += encoder-opa362.o
 obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
 obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
 obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o
diff --git a/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c b/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
index 9a2b5ce58545..8511c648a15c 100644
--- a/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
@@ -208,7 +208,7 @@ static int tvc_probe_pdata(struct platform_device *pdev)
 	ddata->in = in;
 
 	ddata->connector_type = pdata->connector_type;
-	ddata->invert_polarity = ddata->invert_polarity;
+	ddata->invert_polarity = pdata->invert_polarity;
 
 	dssdev = &ddata->dssdev;
 	dssdev->name = pdata->name;
diff --git a/drivers/video/fbdev/omap2/displays-new/encoder-opa362.c b/drivers/video/fbdev/omap2/displays-new/encoder-opa362.c
new file mode 100644
index 000000000000..84a6b3367124
--- /dev/null
+++ b/drivers/video/fbdev/omap2/displays-new/encoder-opa362.c
@@ -0,0 +1,285 @@
+/*
+ * OPA362 analog video amplifier with output/power control
+ *
+ * Copyright (C) 2014 Golden Delicious Computers
+ * Author: H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * based on encoder-tfp410
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct gpio_desc *enable_gpio;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int opa362_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(dssdev->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return -EBUSY;
+
+	r = in->ops.atv->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->src = dssdev;
+	dssdev->dst = dst;
+
+	return 0;
+}
+
+static void opa362_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "disconnect\n");
+
+	WARN_ON(!omapdss_device_is_connected(dssdev));
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	WARN_ON(dst != dssdev->dst);
+	if (dst != dssdev->dst)
+		return;
+
+	dst->src = NULL;
+	dssdev->dst = NULL;
+
+	in->ops.atv->disconnect(in, &ddata->dssdev);
+}
+
+static int opa362_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(dssdev->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.atv->set_timings(in, &ddata->timings);
+
+	r = in->ops.atv->enable(in);
+	if (r)
+		return r;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void opa362_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+
+	in->ops.atv->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void opa362_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "set_timings\n");
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.atv->set_timings(in, timings);
+}
+
+static void opa362_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	dev_dbg(dssdev->dev, "get_timings\n");
+
+	*timings = ddata->timings;
+}
+
+static int opa362_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "check_timings\n");
+
+	return in->ops.atv->check_timings(in, timings);
+}
+
+static void opa362_set_type(struct omap_dss_device *dssdev,
+		enum omap_dss_venc_type type)
+{
+	/* we can only drive a COMPOSITE output */
+	WARN_ON(type != OMAP_DSS_VENC_TYPE_COMPOSITE);
+
+}
+
+static const struct omapdss_atv_ops opa362_atv_ops = {
+	.connect	= opa362_connect,
+	.disconnect	= opa362_disconnect,
+
+	.enable		= opa362_enable,
+	.disable	= opa362_disable,
+
+	.check_timings	= opa362_check_timings,
+	.set_timings	= opa362_set_timings,
+	.get_timings	= opa362_get_timings,
+
+	.set_type	= opa362_set_type,
+};
+
+static int opa362_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev, *in;
+	struct gpio_desc *gpio;
+	int r;
+
+	dev_dbg(&pdev->dev, "probe\n");
+
+	if (node == NULL) {
+		dev_err(&pdev->dev, "Unable to find device tree\n");
+		return -EINVAL;
+	}
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	gpio = devm_gpiod_get(&pdev->dev, "enable");
+	if (IS_ERR(gpio)) {
+		if (PTR_ERR(gpio) != -ENOENT)
+			return PTR_ERR(gpio);
+
+		gpio = NULL;
+	} else {
+		gpiod_direction_output(gpio, 0);
+	}
+
+	ddata->enable_gpio = gpio;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.atv = &opa362_atv_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->owner = THIS_MODULE;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit opa362_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		opa362_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		opa362_disconnect(dssdev, dssdev->dst);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id opa362_of_match[] = {
+	{ .compatible = "omapdss,ti,opa362", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, opa362_of_match);
+
+static struct platform_driver opa362_driver = {
+	.probe	= opa362_probe,
+	.remove	= __exit_p(opa362_remove),
+	.driver	= {
+		.name	= "amplifier-opa362",
+		.owner	= THIS_MODULE,
+		.of_match_table = opa362_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(opa362_driver);
+
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_DESCRIPTION("OPA362 analog video amplifier with output/power control");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c b/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
index 7f3e11b16c86..990af6baeb0f 100644
--- a/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
+++ b/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
@@ -29,33 +29,10 @@ struct panel_drv_data {
 	int hpd_gpio;
 
 	struct omap_video_timings timings;
-
-	struct completion hpd_completion;
 };
 
 #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
 
-static irqreturn_t tpd_hpd_irq_handler(int irq, void *data)
-{
-	struct panel_drv_data *ddata = data;
-	bool hpd;
-
-	hpd = gpio_get_value_cansleep(ddata->hpd_gpio);
-
-	dev_dbg(ddata->dssdev.dev, "hpd %d\n", hpd);
-
-	if (gpio_is_valid(ddata->ls_oe_gpio)) {
-		if (hpd)
-			gpio_set_value_cansleep(ddata->ls_oe_gpio, 1);
-		else
-			gpio_set_value_cansleep(ddata->ls_oe_gpio, 0);
-	}
-
-	complete_all(&ddata->hpd_completion);
-
-	return IRQ_HANDLED;
-}
-
 static int tpd_connect(struct omap_dss_device *dssdev,
 		struct omap_dss_device *dst)
 {
@@ -70,23 +47,10 @@ static int tpd_connect(struct omap_dss_device *dssdev,
 	dst->src = dssdev;
 	dssdev->dst = dst;
 
-	reinit_completion(&ddata->hpd_completion);
-
 	gpio_set_value_cansleep(ddata->ct_cp_hpd_gpio, 1);
 	/* DC-DC converter needs at max 300us to get to 90% of 5V */
 	udelay(300);
 
-	/*
-	 * If there's a cable connected, wait for the hpd irq to trigger,
-	 * which turns on the level shifters.
-	 */
-	if (gpio_get_value_cansleep(ddata->hpd_gpio)) {
-		unsigned long to;
-		to = wait_for_completion_timeout(&ddata->hpd_completion,
-				msecs_to_jiffies(250));
-		WARN_ON_ONCE(to == 0);
-	}
-
 	return 0;
 }
 
@@ -179,11 +143,20 @@ static int tpd_read_edid(struct omap_dss_device *dssdev,
 {
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
 	struct omap_dss_device *in = ddata->in;
+	int r;
 
 	if (!gpio_get_value_cansleep(ddata->hpd_gpio))
 		return -ENODEV;
 
-	return in->ops.hdmi->read_edid(in, edid, len);
+	if (gpio_is_valid(ddata->ls_oe_gpio))
+		gpio_set_value_cansleep(ddata->ls_oe_gpio, 1);
+
+	r = in->ops.hdmi->read_edid(in, edid, len);
+
+	if (gpio_is_valid(ddata->ls_oe_gpio))
+		gpio_set_value_cansleep(ddata->ls_oe_gpio, 0);
+
+	return r;
 }
 
 static bool tpd_detect(struct omap_dss_device *dssdev)
@@ -309,8 +282,6 @@ static int tpd_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ddata);
 
-	init_completion(&ddata->hpd_completion);
-
 	if (dev_get_platdata(&pdev->dev)) {
 		r = tpd_probe_pdata(pdev);
 		if (r)
@@ -340,13 +311,6 @@ static int tpd_probe(struct platform_device *pdev)
 	if (r)
 		goto err_gpio;
 
-	r = devm_request_threaded_irq(&pdev->dev, gpio_to_irq(ddata->hpd_gpio),
-				 NULL, tpd_hpd_irq_handler,
-				 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-				 IRQF_ONESHOT, "hpd", ddata);
-	if (r)
-		goto err_irq;
-
 	dssdev = &ddata->dssdev;
 	dssdev->ops.hdmi = &tpd_hdmi_ops;
 	dssdev->dev = &pdev->dev;
@@ -365,7 +329,6 @@ static int tpd_probe(struct platform_device *pdev)
 
 	return 0;
 err_reg:
-err_irq:
 err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
diff --git a/drivers/video/fbdev/omap2/dss/Makefile b/drivers/video/fbdev/omap2/dss/Makefile
index 2ea9d382354c..b5136d3d4b77 100644
--- a/drivers/video/fbdev/omap2/dss/Makefile
+++ b/drivers/video/fbdev/omap2/dss/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_OMAP2_DSS_INIT) += omapdss-boot-init.o
 obj-$(CONFIG_OMAP2_DSS) += omapdss.o
 # Core DSS files
 omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
-	output.o dss-of.o pll.o
+	output.o dss-of.o pll.o video-pll.o
 # DSS compat layer files
 omapdss-y += manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o \
 	dispc-compat.o display-sysfs.o
diff --git a/drivers/video/fbdev/omap2/dss/dispc.c b/drivers/video/fbdev/omap2/dss/dispc.c
index 9850d9ef9a9d..31b743c70272 100644
--- a/drivers/video/fbdev/omap2/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/dss/dispc.c
@@ -36,6 +36,9 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/sizes.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 
@@ -117,6 +120,9 @@ static struct {
 	const struct dispc_features *feat;
 
 	bool is_enabled;
+
+	struct regmap *syscon_pol;
+	u32 syscon_pol_offset;
 } dispc;
 
 enum omap_color_component {
@@ -2958,6 +2964,25 @@ static void _dispc_mgr_set_lcd_timings(enum omap_channel channel, int hsw,
 		FLD_VAL(vsync_level, 12, 12);
 
 	dispc_write_reg(DISPC_POL_FREQ(channel), l);
+
+	if (dispc.syscon_pol) {
+		const int shifts[] = {
+			[OMAP_DSS_CHANNEL_LCD] = 0,
+			[OMAP_DSS_CHANNEL_LCD2] = 1,
+			[OMAP_DSS_CHANNEL_LCD3] = 2,
+		};
+
+		u32 mask, val;
+
+		mask = (1 << 0) | (1 << 3) | (1 << 6);
+		val = (rf << 0) | (ipc << 3) | (onoff << 6);
+
+		mask <<= 16 + shifts[channel];
+		val <<= 16 + shifts[channel];
+
+		regmap_update_bits(dispc.syscon_pol, dispc.syscon_pol_offset,
+			mask, val);
+	}
 }
 
 /* change name to mode? */
@@ -3037,10 +3062,16 @@ unsigned long dispc_fclk_rate(void)
 		break;
 	case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC:
 		pll = dss_pll_find("dsi0");
+		if (!pll)
+			pll = dss_pll_find("video0");
+
 		r = pll->cinfo.clkout[0];
 		break;
 	case OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC:
 		pll = dss_pll_find("dsi1");
+		if (!pll)
+			pll = dss_pll_find("video1");
+
 		r = pll->cinfo.clkout[0];
 		break;
 	default:
@@ -3069,10 +3100,16 @@ unsigned long dispc_mgr_lclk_rate(enum omap_channel channel)
 			break;
 		case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC:
 			pll = dss_pll_find("dsi0");
+			if (!pll)
+				pll = dss_pll_find("video0");
+
 			r = pll->cinfo.clkout[0];
 			break;
 		case OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC:
 			pll = dss_pll_find("dsi1");
+			if (!pll)
+				pll = dss_pll_find("video1");
+
 			r = pll->cinfo.clkout[0];
 			break;
 		default:
@@ -3668,6 +3705,7 @@ static int __init dispc_init_features(struct platform_device *pdev)
 		break;
 
 	case OMAPDSS_VER_OMAP5:
+	case OMAPDSS_VER_DRA7xx:
 		src = &omap54xx_dispc_feats;
 		break;
 
@@ -3728,6 +3766,7 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
 	u32 rev;
 	int r = 0;
 	struct resource *dispc_mem;
+	struct device_node *np = pdev->dev.of_node;
 
 	dispc.pdev = pdev;
 
@@ -3754,6 +3793,20 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	if (np && of_property_read_bool(np, "syscon-pol")) {
+		dispc.syscon_pol = syscon_regmap_lookup_by_phandle(np, "syscon-pol");
+		if (IS_ERR(dispc.syscon_pol)) {
+			dev_err(&pdev->dev, "failed to get syscon-pol regmap\n");
+			return PTR_ERR(dispc.syscon_pol);
+		}
+
+		if (of_property_read_u32_index(np, "syscon-pol", 1,
+				&dispc.syscon_pol_offset)) {
+			dev_err(&pdev->dev, "failed to get syscon-pol offset\n");
+			return -EINVAL;
+		}
+	}
+
 	pm_runtime_enable(&pdev->dev);
 
 	r = dispc_runtime_get();
@@ -3832,6 +3885,7 @@ static const struct of_device_id dispc_of_match[] = {
 	{ .compatible = "ti,omap3-dispc", },
 	{ .compatible = "ti,omap4-dispc", },
 	{ .compatible = "ti,omap5-dispc", },
+	{ .compatible = "ti,dra7-dispc", },
 	{},
 };
 
diff --git a/drivers/video/fbdev/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index 9a2f8c3b102d..f83e7b030249 100644
--- a/drivers/video/fbdev/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
@@ -106,6 +106,17 @@ static struct dss_pll *dpi_get_pll(enum omap_channel channel)
 			return NULL;
 		}
 
+	case OMAPDSS_VER_DRA7xx:
+		switch (channel) {
+		case OMAP_DSS_CHANNEL_LCD:
+		case OMAP_DSS_CHANNEL_LCD2:
+			return dss_pll_find("video0");
+		case OMAP_DSS_CHANNEL_LCD3:
+			return dss_pll_find("video1");
+		default:
+			return NULL;
+		}
+
 	default:
 		return NULL;
 	}
@@ -590,6 +601,10 @@ static void dpi_init_pll(struct dpi_data *dpi)
 	if (!pll)
 		return;
 
+	/* On DRA7 we need to set a mux to use the PLL */
+	if (omapdss_get_version() == OMAPDSS_VER_DRA7xx)
+		dss_ctrl_pll_set_control_mux(pll->id, dpi->output.dispc_channel);
+
 	if (dpi_verify_dsi_pll(pll)) {
 		DSSWARN("DSI PLL not operational\n");
 		return;
@@ -615,6 +630,17 @@ static enum omap_channel dpi_get_channel(int port_num)
 	case OMAPDSS_VER_AM43xx:
 		return OMAP_DSS_CHANNEL_LCD;
 
+	case OMAPDSS_VER_DRA7xx:
+		switch (port_num) {
+		case 2:
+			return OMAP_DSS_CHANNEL_LCD3;
+		case 1:
+			return OMAP_DSS_CHANNEL_LCD2;
+		case 0:
+		default:
+			return OMAP_DSS_CHANNEL_LCD;
+		}
+
 	case OMAPDSS_VER_OMAP4430_ES1:
 	case OMAPDSS_VER_OMAP4430_ES2:
 	case OMAPDSS_VER_OMAP4:
diff --git a/drivers/video/fbdev/omap2/dss/dsi.c b/drivers/video/fbdev/omap2/dss/dsi.c
index 3e44c580b1f8..5081f6fb1737 100644
--- a/drivers/video/fbdev/omap2/dss/dsi.c
+++ b/drivers/video/fbdev/omap2/dss/dsi.c
@@ -5238,6 +5238,7 @@ static int dsi_init_pll_data(struct platform_device *dsidev)
 	}
 
 	pll->name = dsi->module_id == 0 ? "dsi0" : "dsi1";
+	pll->id = dsi->module_id == 0 ? DSS_PLL_DSI1 : DSS_PLL_DSI2;
 	pll->clkin = clk;
 	pll->base = dsi->pll_base;
 
diff --git a/drivers/video/fbdev/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
index 9987154d50b4..a6d10d4279f3 100644
--- a/drivers/video/fbdev/omap2/dss/dss.c
+++ b/drivers/video/fbdev/omap2/dss/dss.c
@@ -34,7 +34,10 @@
 #include <linux/pm_runtime.h>
 #include <linux/gfp.h>
 #include <linux/sizes.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <linux/of.h>
+#include <linux/regulator/consumer.h>
 
 #include <video/omapdss.h>
 
@@ -63,14 +66,11 @@ struct dss_reg {
 #define REG_FLD_MOD(idx, val, start, end) \
 	dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end))
 
-static int dss_runtime_get(void);
-static void dss_runtime_put(void);
-
 struct dss_features {
 	u8 fck_div_max;
 	u8 dss_fck_multiplier;
 	const char *parent_clk_name;
-	enum omap_display_type *ports;
+	const enum omap_display_type *ports;
 	int num_ports;
 	int (*dpi_select_source)(int port, enum omap_channel channel);
 };
@@ -78,6 +78,8 @@ struct dss_features {
 static struct {
 	struct platform_device *pdev;
 	void __iomem    *base;
+	struct regmap	*syscon_pll_ctrl;
+	u32		syscon_pll_ctrl_offset;
 
 	struct clk	*parent_clk;
 	struct clk	*dss_clk;
@@ -95,6 +97,9 @@ static struct {
 	u32		ctx[DSS_SZ_REGS / sizeof(u32)];
 
 	const struct dss_features *feat;
+
+	struct dss_pll	*video1_pll;
+	struct dss_pll	*video2_pll;
 } dss;
 
 static const char * const dss_generic_clk_source_names[] = {
@@ -158,6 +163,99 @@ static void dss_restore_context(void)
 #undef SR
 #undef RR
 
+void dss_ctrl_pll_enable(enum dss_pll_id pll_id, bool enable)
+{
+	unsigned shift;
+	unsigned val;
+
+	if (!dss.syscon_pll_ctrl)
+		return;
+
+	val = !enable;
+
+	switch (pll_id) {
+	case DSS_PLL_VIDEO1:
+		shift = 0;
+		break;
+	case DSS_PLL_VIDEO2:
+		shift = 1;
+		break;
+	case DSS_PLL_HDMI:
+		shift = 2;
+		break;
+	default:
+		DSSERR("illegal DSS PLL ID %d\n", pll_id);
+		return;
+	}
+
+	regmap_update_bits(dss.syscon_pll_ctrl, dss.syscon_pll_ctrl_offset,
+		1 << shift, val << shift);
+}
+
+void dss_ctrl_pll_set_control_mux(enum dss_pll_id pll_id,
+	enum omap_channel channel)
+{
+	unsigned shift, val;
+
+	if (!dss.syscon_pll_ctrl)
+		return;
+
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		shift = 3;
+
+		switch (pll_id) {
+		case DSS_PLL_VIDEO1:
+			val = 0; break;
+		case DSS_PLL_HDMI:
+			val = 1; break;
+		default:
+			DSSERR("error in PLL mux config for LCD\n");
+			return;
+		}
+
+		break;
+	case OMAP_DSS_CHANNEL_LCD2:
+		shift = 5;
+
+		switch (pll_id) {
+		case DSS_PLL_VIDEO1:
+			val = 0; break;
+		case DSS_PLL_VIDEO2:
+			val = 1; break;
+		case DSS_PLL_HDMI:
+			val = 2; break;
+		default:
+			DSSERR("error in PLL mux config for LCD2\n");
+			return;
+		}
+
+		break;
+	case OMAP_DSS_CHANNEL_LCD3:
+		shift = 7;
+
+		switch (pll_id) {
+		case DSS_PLL_VIDEO1:
+			val = 1; break;
+		case DSS_PLL_VIDEO2:
+			val = 0; break;
+		case DSS_PLL_HDMI:
+			val = 2; break;
+		default:
+			DSSERR("error in PLL mux config for LCD3\n");
+			return;
+		}
+
+		break;
+	default:
+		DSSERR("error in PLL mux config\n");
+		return;
+	}
+
+	regmap_update_bits(dss.syscon_pll_ctrl, dss.syscon_pll_ctrl_offset,
+		0x3 << shift, val << shift);
+}
+
 void dss_sdi_init(int datapairs)
 {
 	u32 l;
@@ -605,6 +703,26 @@ static int dss_dpi_select_source_omap5(int port, enum omap_channel channel)
 	return 0;
 }
 
+static int dss_dpi_select_source_dra7xx(int port, enum omap_channel channel)
+{
+	switch (port) {
+	case 0:
+		return dss_dpi_select_source_omap5(port, channel);
+	case 1:
+		if (channel != OMAP_DSS_CHANNEL_LCD2)
+			return -EINVAL;
+		break;
+	case 2:
+		if (channel != OMAP_DSS_CHANNEL_LCD3)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 int dss_dpi_select_source(int port, enum omap_channel channel)
 {
 	return dss.feat->dpi_select_source(port, channel);
@@ -643,7 +761,7 @@ static void dss_put_clocks(void)
 		clk_put(dss.parent_clk);
 }
 
-static int dss_runtime_get(void)
+int dss_runtime_get(void)
 {
 	int r;
 
@@ -654,7 +772,7 @@ static int dss_runtime_get(void)
 	return r < 0 ? r : 0;
 }
 
-static void dss_runtime_put(void)
+void dss_runtime_put(void)
 {
 	int r;
 
@@ -677,15 +795,21 @@ void dss_debug_dump_clocks(struct seq_file *s)
 #endif
 
 
-static enum omap_display_type omap2plus_ports[] = {
+static const enum omap_display_type omap2plus_ports[] = {
 	OMAP_DISPLAY_TYPE_DPI,
 };
 
-static enum omap_display_type omap34xx_ports[] = {
+static const enum omap_display_type omap34xx_ports[] = {
 	OMAP_DISPLAY_TYPE_DPI,
 	OMAP_DISPLAY_TYPE_SDI,
 };
 
+static const enum omap_display_type dra7xx_ports[] = {
+	OMAP_DISPLAY_TYPE_DPI,
+	OMAP_DISPLAY_TYPE_DPI,
+	OMAP_DISPLAY_TYPE_DPI,
+};
+
 static const struct dss_features omap24xx_dss_feats __initconst = {
 	/*
 	 * fck div max is really 16, but the divider range has gaps. The range
@@ -744,6 +868,15 @@ static const struct dss_features am43xx_dss_feats __initconst = {
 	.num_ports		=	ARRAY_SIZE(omap2plus_ports),
 };
 
+static const struct dss_features dra7xx_dss_feats __initconst = {
+	.fck_div_max		=	64,
+	.dss_fck_multiplier	=	1,
+	.parent_clk_name	=	"dpll_per_x2_ck",
+	.dpi_select_source	=	&dss_dpi_select_source_dra7xx,
+	.ports			=	dra7xx_ports,
+	.num_ports		=	ARRAY_SIZE(dra7xx_ports),
+};
+
 static int __init dss_init_features(struct platform_device *pdev)
 {
 	const struct dss_features *src;
@@ -784,6 +917,10 @@ static int __init dss_init_features(struct platform_device *pdev)
 		src = &am43xx_dss_feats;
 		break;
 
+	case OMAPDSS_VER_DRA7xx:
+		src = &dra7xx_dss_feats;
+		break;
+
 	default:
 		return -ENODEV;
 	}
@@ -884,8 +1021,10 @@ static void __exit dss_uninit_ports(struct platform_device *pdev)
 static int __init omap_dsshw_probe(struct platform_device *pdev)
 {
 	struct resource *dss_mem;
+	struct device_node *np = pdev->dev.of_node;
 	u32 rev;
 	int r;
+	struct regulator *pll_regulator;
 
 	dss.pdev = pdev;
 
@@ -940,6 +1079,57 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 
 	dss_init_ports(pdev);
 
+	if (np && of_property_read_bool(np, "syscon-pll-ctrl")) {
+		dss.syscon_pll_ctrl = syscon_regmap_lookup_by_phandle(np,
+			"syscon-pll-ctrl");
+		if (IS_ERR(dss.syscon_pll_ctrl)) {
+			dev_err(&pdev->dev,
+				"failed to get syscon-pll-ctrl regmap\n");
+			return PTR_ERR(dss.syscon_pll_ctrl);
+		}
+
+		if (of_property_read_u32_index(np, "syscon-pll-ctrl", 1,
+				&dss.syscon_pll_ctrl_offset)) {
+			dev_err(&pdev->dev,
+				"failed to get syscon-pll-ctrl offset\n");
+			return -EINVAL;
+		}
+	}
+
+	pll_regulator = devm_regulator_get(&pdev->dev, "vdda_video");
+	if (IS_ERR(pll_regulator)) {
+		r = PTR_ERR(pll_regulator);
+
+		switch (r) {
+		case -ENOENT:
+			pll_regulator = NULL;
+			break;
+
+		case -EPROBE_DEFER:
+			return -EPROBE_DEFER;
+
+		default:
+			DSSERR("can't get DPLL VDDA regulator\n");
+			return r;
+		}
+	}
+
+	if (of_property_match_string(np, "reg-names", "pll1") >= 0) {
+		dss.video1_pll = dss_video_pll_init(pdev, 0, pll_regulator);
+		if (IS_ERR(dss.video1_pll)) {
+			r = PTR_ERR(dss.video1_pll);
+			goto err_pll_init;
+		}
+	}
+
+	if (of_property_match_string(np, "reg-names", "pll2") >= 0) {
+		dss.video2_pll = dss_video_pll_init(pdev, 1, pll_regulator);
+		if (IS_ERR(dss.video2_pll)) {
+			r = PTR_ERR(dss.video2_pll);
+			goto err_pll_init;
+		}
+	}
+
 	rev = dss_read_reg(DSS_REVISION);
 	printk(KERN_INFO "OMAP DSS rev %d.%d\n",
 			FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
@@ -950,6 +1140,12 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_pll_init:
+	if (dss.video1_pll)
+		dss_video_pll_uninit(dss.video1_pll);
+
+	if (dss.video2_pll)
+		dss_video_pll_uninit(dss.video2_pll);
 err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
 err_setup_clocks:
@@ -959,6 +1155,12 @@ err_setup_clocks:
 
 static int __exit omap_dsshw_remove(struct platform_device *pdev)
 {
+	if (dss.video1_pll)
+		dss_video_pll_uninit(dss.video1_pll);
+
+	if (dss.video2_pll)
+		dss_video_pll_uninit(dss.video2_pll);
+
 	dss_uninit_ports(pdev);
 
 	pm_runtime_disable(&pdev->dev);
@@ -1003,6 +1205,7 @@ static const struct of_device_id dss_of_match[] = {
 	{ .compatible = "ti,omap3-dss", },
 	{ .compatible = "ti,omap4-dss", },
 	{ .compatible = "ti,omap5-dss", },
+	{ .compatible = "ti,dra7-dss", },
 	{},
 };
 
diff --git a/drivers/video/fbdev/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
index 14fb0c23f4a2..4812eee2622a 100644
--- a/drivers/video/fbdev/omap2/dss/dss.h
+++ b/drivers/video/fbdev/omap2/dss/dss.h
@@ -100,6 +100,14 @@ enum dss_writeback_channel {
 	DSS_WB_LCD3_MGR =	7,
 };
 
+enum dss_pll_id {
+	DSS_PLL_DSI1,
+	DSS_PLL_DSI2,
+	DSS_PLL_HDMI,
+	DSS_PLL_VIDEO1,
+	DSS_PLL_VIDEO2,
+};
+
 struct dss_pll;
 
 #define DSS_PLL_MAX_HSDIVS 4
@@ -150,6 +158,7 @@ struct dss_pll_hw {
 
 struct dss_pll {
 	const char *name;
+	enum dss_pll_id id;
 
 	struct clk *clkin;
 	struct regulator *regulator;
@@ -250,6 +259,9 @@ void dss_overlay_kobj_uninit(struct omap_overlay *ovl);
 int dss_init_platform_driver(void) __init;
 void dss_uninit_platform_driver(void);
 
+int dss_runtime_get(void);
+void dss_runtime_put(void);
+
 unsigned long dss_get_dispc_clk_rate(void);
 int dss_dpi_select_source(int port, enum omap_channel channel);
 void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select);
@@ -257,6 +269,11 @@ enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void);
 const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src);
 void dss_dump_clocks(struct seq_file *s);
 
+/* DSS VIDEO PLL */
+struct dss_pll *dss_video_pll_init(struct platform_device *pdev, int id,
+	struct regulator *regulator);
+void dss_video_pll_uninit(struct dss_pll *pll);
+
 /* dss-of */
 struct device_node *dss_of_port_get_parent_device(struct device_node *port);
 u32 dss_of_port_get_port_number(struct device_node *port);
@@ -265,6 +282,10 @@ u32 dss_of_port_get_port_number(struct device_node *port);
 void dss_debug_dump_clocks(struct seq_file *s);
 #endif
 
+void dss_ctrl_pll_enable(enum dss_pll_id pll_id, bool enable);
+void dss_ctrl_pll_set_control_mux(enum dss_pll_id pll_id,
+	enum omap_channel channel);
+
 void dss_sdi_init(int datapairs);
 int dss_sdi_enable(void);
 void dss_sdi_disable(void);
@@ -446,5 +467,6 @@ int dss_pll_write_config_type_a(struct dss_pll *pll,
 		const struct dss_pll_clock_info *cinfo);
 int dss_pll_write_config_type_b(struct dss_pll *pll,
 		const struct dss_pll_clock_info *cinfo);
+int dss_pll_wait_reset_done(struct dss_pll *pll);
 
 #endif
diff --git a/drivers/video/fbdev/omap2/dss/dss_features.c b/drivers/video/fbdev/omap2/dss/dss_features.c
index 0e3da809473c..376270b777f8 100644
--- a/drivers/video/fbdev/omap2/dss/dss_features.c
+++ b/drivers/video/fbdev/omap2/dss/dss_features.c
@@ -223,7 +223,7 @@ static const enum omap_dss_output_id omap5_dss_supported_outputs[] = {
 	OMAP_DSS_OUTPUT_DSI1 | OMAP_DSS_OUTPUT_DSI2,
 
 	/* OMAP_DSS_CHANNEL_DIGIT */
-	OMAP_DSS_OUTPUT_HDMI | OMAP_DSS_OUTPUT_DPI,
+	OMAP_DSS_OUTPUT_HDMI,
 
 	/* OMAP_DSS_CHANNEL_LCD2 */
 	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
@@ -943,6 +943,7 @@ void dss_features_init(enum omapdss_version version)
 		break;
 
 	case OMAPDSS_VER_OMAP5:
+	case OMAPDSS_VER_DRA7xx:
 		omap_current_dss_features = &omap5_dss_features;
 		break;
 
diff --git a/drivers/video/fbdev/omap2/dss/hdmi5.c b/drivers/video/fbdev/omap2/dss/hdmi5.c
index 39aae3aa7136..3f0b34a7031a 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi5.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi5.c
@@ -787,6 +787,7 @@ static const struct dev_pm_ops hdmi_pm_ops = {
 
 static const struct of_device_id hdmi_of_match[] = {
 	{ .compatible = "ti,omap5-hdmi", },
+	{ .compatible = "ti,dra7-hdmi", },
 	{},
 };
 
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_phy.c b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
index bc9e07d2afbe..1f5d19c119ce 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_phy.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
@@ -208,6 +208,7 @@ static int hdmi_phy_init_features(struct platform_device *pdev)
 		break;
 
 	case OMAPDSS_VER_OMAP5:
+	case OMAPDSS_VER_DRA7xx:
 		src = &omap54xx_phy_feats;
 		break;
 
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_pll.c b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
index ac83ef5cfd7d..06e23a7c432c 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_pll.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
@@ -104,6 +104,8 @@ static int hdmi_pll_enable(struct dss_pll *dsspll)
 	struct hdmi_wp_data *wp = pll->wp;
 	u16 r = 0;
 
+	dss_ctrl_pll_enable(DSS_PLL_HDMI, true);
+
 	r = hdmi_wp_set_pll_pwr(wp, HDMI_PLLPWRCMD_BOTHON_ALLCLKS);
 	if (r)
 		return r;
@@ -117,6 +119,8 @@ static void hdmi_pll_disable(struct dss_pll *dsspll)
 	struct hdmi_wp_data *wp = pll->wp;
 
 	hdmi_wp_set_pll_pwr(wp, HDMI_PLLPWRCMD_ALLOFF);
+
+	dss_ctrl_pll_enable(DSS_PLL_HDMI, false);
 }
 
 static const struct dss_pll_ops dsi_pll_ops = {
@@ -185,6 +189,7 @@ static int dsi_init_pll_data(struct platform_device *pdev, struct hdmi_pll_data
 	}
 
 	pll->name = "hdmi";
+	pll->id = DSS_PLL_HDMI;
 	pll->base = hpll->base;
 	pll->clkin = clk;
 
@@ -196,6 +201,7 @@ static int dsi_init_pll_data(struct platform_device *pdev, struct hdmi_pll_data
 		break;
 
 	case OMAPDSS_VER_OMAP5:
+	case OMAPDSS_VER_DRA7xx:
 		pll->hw = &dss_omap5_hdmi_pll_hw;
 		break;
 
diff --git a/drivers/video/fbdev/omap2/dss/omapdss-boot-init.c b/drivers/video/fbdev/omap2/dss/omapdss-boot-init.c
index 2f0822ee3ff9..42b87f95267c 100644
--- a/drivers/video/fbdev/omap2/dss/omapdss-boot-init.c
+++ b/drivers/video/fbdev/omap2/dss/omapdss-boot-init.c
@@ -186,6 +186,7 @@ static const struct of_device_id omapdss_of_match[] __initconst = {
 	{ .compatible = "ti,omap3-dss", },
 	{ .compatible = "ti,omap4-dss", },
 	{ .compatible = "ti,omap5-dss", },
+	{ .compatible = "ti,dra7-dss", },
 	{},
 };
 
diff --git a/drivers/video/fbdev/omap2/dss/pll.c b/drivers/video/fbdev/omap2/dss/pll.c
index 335ffac224b9..f974ddcd3b6e 100644
--- a/drivers/video/fbdev/omap2/dss/pll.c
+++ b/drivers/video/fbdev/omap2/dss/pll.c
@@ -222,6 +222,16 @@ static int wait_for_bit_change(void __iomem *reg, int bitnum, int value)
 	return !value;
 }
 
+int dss_pll_wait_reset_done(struct dss_pll *pll)
+{
+	void __iomem *base = pll->base;
+
+	if (wait_for_bit_change(base + PLL_STATUS, 0, 1) != 1)
+		return -ETIMEDOUT;
+	else
+		return 0;
+}
+
 static int dss_wait_hsdiv_ack(struct dss_pll *pll, u32 hsdiv_ack_mask)
 {
 	int t = 100;
diff --git a/drivers/video/fbdev/omap2/dss/video-pll.c b/drivers/video/fbdev/omap2/dss/video-pll.c
new file mode 100644
index 000000000000..b1ec59e42940
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/video-pll.c
@@ -0,0 +1,211 @@
+/*
+* Copyright (C) 2014 Texas Instruments Ltd
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License version 2 as published by
+* the Free Software Foundation.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+#include "dss_features.h"
+
+struct dss_video_pll {
+	struct dss_pll pll;
+
+	struct device *dev;
+
+	void __iomem *clkctrl_base;
+};
+
+#define REG_MOD(reg, val, start, end) \
+	writel_relaxed(FLD_MOD(readl_relaxed(reg), val, start, end), reg)
+
+static void dss_dpll_enable_scp_clk(struct dss_video_pll *vpll)
+{
+	REG_MOD(vpll->clkctrl_base, 1, 14, 14); /* CIO_CLK_ICG */
+}
+
+static void dss_dpll_disable_scp_clk(struct dss_video_pll *vpll)
+{
+	REG_MOD(vpll->clkctrl_base, 0, 14, 14); /* CIO_CLK_ICG */
+}
+
+static void dss_dpll_power_enable(struct dss_video_pll *vpll)
+{
+	REG_MOD(vpll->clkctrl_base, 2, 31, 30); /* PLL_POWER_ON_ALL */
+
+	/*
+	 * DRA7x PLL CTRL's PLL_PWR_STATUS seems to always return 0,
+	 * so we have to use fixed delay here.
+	 */
+	msleep(1);
+}
+
+static void dss_dpll_power_disable(struct dss_video_pll *vpll)
+{
+	REG_MOD(vpll->clkctrl_base, 0, 31, 30);	/* PLL_POWER_OFF */
+}
+
+static int dss_video_pll_enable(struct dss_pll *pll)
+{
+	struct dss_video_pll *vpll = container_of(pll, struct dss_video_pll, pll);
+	int r;
+
+	r = dss_runtime_get();
+	if (r)
+		return r;
+
+	dss_ctrl_pll_enable(pll->id, true);
+
+	dss_dpll_enable_scp_clk(vpll);
+
+	r = dss_pll_wait_reset_done(pll);
+	if (r)
+		goto err_reset;
+
+	dss_dpll_power_enable(vpll);
+
+	return 0;
+
+err_reset:
+	dss_dpll_disable_scp_clk(vpll);
+	dss_ctrl_pll_enable(pll->id, false);
+	dss_runtime_put();
+
+	return r;
+}
+
+static void dss_video_pll_disable(struct dss_pll *pll)
+{
+	struct dss_video_pll *vpll = container_of(pll, struct dss_video_pll, pll);
+
+	dss_dpll_power_disable(vpll);
+
+	dss_dpll_disable_scp_clk(vpll);
+
+	dss_ctrl_pll_enable(pll->id, false);
+
+	dss_runtime_put();
+}
+
+static const struct dss_pll_ops dss_pll_ops = {
+	.enable = dss_video_pll_enable,
+	.disable = dss_video_pll_disable,
+	.set_config = dss_pll_write_config_type_a,
+};
+
+static const struct dss_pll_hw dss_dra7_video_pll_hw = {
+	.n_max = (1 << 8) - 1,
+	.m_max = (1 << 12) - 1,
+	.mX_max = (1 << 5) - 1,
+	.fint_min = 500000,
+	.fint_max = 2500000,
+	.clkdco_max = 1800000000,
+
+	.n_msb = 8,
+	.n_lsb = 1,
+	.m_msb = 20,
+	.m_lsb = 9,
+
+	.mX_msb[0] = 25,
+	.mX_lsb[0] = 21,
+	.mX_msb[1] = 30,
+	.mX_lsb[1] = 26,
+
+	.has_refsel = true,
+};
+
+struct dss_pll *dss_video_pll_init(struct platform_device *pdev, int id,
+	struct regulator *regulator)
+{
+	const char * const reg_name[] = { "pll1", "pll2" };
+	const char * const clkctrl_name[] = { "pll1_clkctrl", "pll2_clkctrl" };
+	const char * const clkin_name[] = { "video1_clk", "video2_clk" };
+
+	struct resource *res;
+	struct dss_video_pll *vpll;
+	void __iomem *pll_base, *clkctrl_base;
+	struct clk *clk;
+	struct dss_pll *pll;
+	int r;
+
+	/* PLL CONTROL */
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, reg_name[id]);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"missing platform resource data for pll%d\n", id);
+		return ERR_PTR(-ENODEV);
+	}
+
+	pll_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pll_base)) {
+		dev_err(&pdev->dev, "failed to ioremap pll%d reg_name\n", id);
+		return ERR_CAST(pll_base);
+	}
+
+	/* CLOCK CONTROL */
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+		clkctrl_name[id]);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"missing platform resource data for pll%d\n", id);
+		return ERR_PTR(-ENODEV);
+	}
+
+	clkctrl_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(clkctrl_base)) {
+		dev_err(&pdev->dev, "failed to ioremap pll%d clkctrl\n", id);
+		return ERR_CAST(clkctrl_base);
+	}
+
+	/* CLKIN */
+
+	clk = devm_clk_get(&pdev->dev, clkin_name[id]);
+	if (IS_ERR(clk)) {
+		DSSERR("can't get video pll clkin\n");
+		return ERR_CAST(clk);
+	}
+
+	vpll = devm_kzalloc(&pdev->dev, sizeof(*vpll), GFP_KERNEL);
+	if (!vpll)
+		return ERR_PTR(-ENOMEM);
+
+	vpll->dev = &pdev->dev;
+	vpll->clkctrl_base = clkctrl_base;
+
+	pll = &vpll->pll;
+
+	pll->name = id == 0 ? "video0" : "video1";
+	pll->id = id == 0 ? DSS_PLL_VIDEO1 : DSS_PLL_VIDEO2;
+	pll->clkin = clk;
+	pll->regulator = regulator;
+	pll->base = pll_base;
+	pll->hw = &dss_dra7_video_pll_hw;
+	pll->ops = &dss_pll_ops;
+
+	r = dss_pll_register(pll);
+	if (r)
+		return ERR_PTR(r);
+
+	return pll;
+}
+
+void dss_video_pll_uninit(struct dss_pll *pll)
+{
+	dss_pll_unregister(pll);
+}
diff --git a/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c b/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
index 146b6f5428db..9ddfdd63b84c 100644
--- a/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
@@ -137,8 +137,11 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 			goto undo;
 	}
 
-	if (ovl->manager)
-		ovl->manager->apply(ovl->manager);
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			goto undo;
+	}
 
 	if (pi->enabled) {
 		r = ovl->enable(ovl);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 6a84498ea513..60de61fea8e3 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -314,6 +314,7 @@ enum omapdss_version {
 	OMAPDSS_VER_OMAP4,		/* All other OMAP4s */
 	OMAPDSS_VER_OMAP5,
 	OMAPDSS_VER_AM43xx,
+	OMAPDSS_VER_DRA7xx,
 };
 
 /* Board specific data */