korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 00:34:20 +08:00
Code Issues Packages Projects Releases Wiki Activity

spi: rockchip: fix missing error on unsupported SPI_CS_HIGH

Browse Source 
The hardware (except for the ROCKCHIP_SPI_VER2_TYPE2 version) does not
support active-high native chip selects. However if such a CS is configured
the core does not error as it normally should, because the
'ctlr->use_gpio_descriptors = true' line in rockchip_spi_probe() makes the
core set SPI_CS_HIGH in ctlr->mode_bits.

In such a case the spi-rockchip driver operates normally but produces an
active-low chip select signal without notice.

There is no provision in the current core code to handle this
situation. Fix by adding a check in the ctlr->setup function (similarly to
what spi-atmel.c does).

This cannot be done reading the SPI_CS_HIGH but in ctlr->mode_bits because
that bit gets always set by the core for master mode (see above).

Fixes: eb1262e3cc ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20220421213251.1077899-1-luca.ceresoli@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Luca Ceresoli 2022-04-21 23:32:51 +02:00 committed by Mark Brown
parent 40b6a13771
commit d5d933f09a
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
1 changed files with 8 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/spi/spi-rockchip.c
View File

@ -196,6 +196,8 @@ struct rockchip_spi {
bool slave_abort;
bool cs_inactive; /* spi slave tansmition stop when cs inactive */
bool cs_high_supported; /* native CS supports active-high polarity */
struct spi_transfer *xfer; /* Store xfer temporarily */
};
@ -719,6 +721,11 @@ static int rockchip_spi_setup(struct spi_device *spi)
struct rockchip_spi *rs = spi_controller_get_devdata(spi->controller);
u32 cr0;
if (!spi->cs_gpiod && (spi->mode & SPI_CS_HIGH) && !rs->cs_high_supported) {
dev_warn(&spi->dev, "setup: non GPIO CS can't be active-high\n");
return -EINVAL;
}
pm_runtime_get_sync(rs->dev);
cr0 = readl_relaxed(rs->regs + ROCKCHIP_SPI_CTRLR0);
@ -899,6 +906,7 @@ static int rockchip_spi_probe(struct platform_device *pdev)
switch (readl_relaxed(rs->regs + ROCKCHIP_SPI_VERSION)) {
case ROCKCHIP_SPI_VER2_TYPE2:
rs->cs_high_supported = true;
ctlr->mode_bits |= SPI_CS_HIGH;
if (ctlr->can_dma && slave_mode)
rs->cs_inactive = true;