From 3c44e2b6cde674797b76e76d3a903a63ce8a18bb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 16 Dec 2022 13:15:34 -0800 Subject: [PATCH 001/454] Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode" This reverts commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 because it causes loss of keyboard on HP 15-da1xxx. Fixes: ac5408991ea6 ("Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode") Reported-by: Jiri Slaby Link: https://lore.kernel.org/r/824effa5-8b9a-c28a-82bb-9b0ab24623e1@kernel.org Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1206358 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index b0f776448a1c..fa021af8506e 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -192,7 +192,6 @@ static const char * const smbus_pnp_ids[] = { "SYN3221", /* HP 15-ay000 */ "SYN323d", /* HP Spectre X360 13-w013dx */ "SYN3257", /* HP Envy 13-ad105ng */ - "SYN3286", /* HP Laptop 15-da3001TU */ NULL }; From 71a06f1034b91e15d3ba6b5539c7d3a2d7f13030 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Sat, 17 Dec 2022 00:57:42 +0100 Subject: [PATCH 002/454] mac802154: Fix possible double free upon parsing error Commit 4d1c7d87030b ("mac802154: Move an skb free within the rx path") tried to simplify error handling within the receive path by moving the kfree_skb() call at the very end of the top-level function but missed one kfree_skb() called upon frame parsing error. Prevent this possible double free from happening. Fixes: 4d1c7d87030b ("mac802154: Move an skb free within the rx path") Reported-by: Dan Carpenter Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20221216235742.646134-1-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt --- net/mac802154/rx.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/mac802154/rx.c b/net/mac802154/rx.c index c2aae2a6d6a6..97bb4401dd3e 100644 --- a/net/mac802154/rx.c +++ b/net/mac802154/rx.c @@ -213,7 +213,6 @@ __ieee802154_rx_handle_packet(struct ieee802154_local *local, ret = ieee802154_parse_frame_start(skb, &hdr); if (ret) { pr_debug("got invalid frame\n"); - kfree_skb(skb); return; } From cc3304052a89ab6ac887ed9224420a27e3d354e1 Mon Sep 17 00:00:00 2001 From: Olivier Moysan Date: Fri, 2 Dec 2022 16:28:48 +0100 Subject: [PATCH 003/454] iio: adc: stm32-dfsdm: fill module aliases When STM32 DFSDM driver is built as module, no modalias information is available. This prevents module to be loaded by udev. Add MODULE_DEVICE_TABLE() to fill module aliases. Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Olivier Moysan Link: https://lore.kernel.org/r/20221202152848.45585-1-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/stm32-dfsdm-adc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index 6d21ea84fa82..a428bdb567d5 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -1520,6 +1520,7 @@ static const struct of_device_id stm32_dfsdm_adc_match[] = { }, {} }; +MODULE_DEVICE_TABLE(of, stm32_dfsdm_adc_match); static int stm32_dfsdm_adc_probe(struct platform_device *pdev) { From cbd3a0153cd18a2cbef6bf3cf31bb406c3fc9f55 Mon Sep 17 00:00:00 2001 From: Xiongfeng Wang Date: Tue, 29 Nov 2022 10:03:16 +0800 Subject: [PATCH 004/454] iio: adc: berlin2-adc: Add missing of_node_put() in error path of_get_parent() will return a device_node pointer with refcount incremented. We need to use of_node_put() on it when done. Add the missing of_node_put() in the error path of berlin2_adc_probe(); Fixes: 70f1937911ca ("iio: adc: add support for Berlin") Signed-off-by: Xiongfeng Wang Link: https://lore.kernel.org/r/20221129020316.191731-1-wangxiongfeng2@huawei.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/berlin2-adc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/berlin2-adc.c b/drivers/iio/adc/berlin2-adc.c index 3d2e8b4db61a..a4e7c7eff5ac 100644 --- a/drivers/iio/adc/berlin2-adc.c +++ b/drivers/iio/adc/berlin2-adc.c @@ -298,8 +298,10 @@ static int berlin2_adc_probe(struct platform_device *pdev) int ret; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv)); - if (!indio_dev) + if (!indio_dev) { + of_node_put(parent_np); return -ENOMEM; + } priv = iio_priv(indio_dev); From 6794ed0cfcc6ce737240eccc48b3e8190df36703 Mon Sep 17 00:00:00 2001 From: Marco Pagani Date: Fri, 25 Nov 2022 12:31:12 +0100 Subject: [PATCH 005/454] iio: adc: xilinx-ams: fix devm_krealloc() return value check The clang-analyzer reported a warning: "Value stored to 'ret' is never read". Fix the return value check if devm_krealloc() fails to resize ams_channels. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Signed-off-by: Marco Pagani Acked-by: Michal Simek Link: https://lore.kernel.org/r/20221125113112.219290-1-marpagan@redhat.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-ams.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c index 5b4bdf3a26bb..a507d2e17079 100644 --- a/drivers/iio/adc/xilinx-ams.c +++ b/drivers/iio/adc/xilinx-ams.c @@ -1329,7 +1329,7 @@ static int ams_parse_firmware(struct iio_dev *indio_dev) dev_channels = devm_krealloc(dev, ams_channels, dev_size, GFP_KERNEL); if (!dev_channels) - ret = -ENOMEM; + return -ENOMEM; indio_dev->channels = dev_channels; indio_dev->num_channels = num_channels; From 0fc3562a993c3dc41d1177b3983d9300d0db1d4d Mon Sep 17 00:00:00 2001 From: Frank Li Date: Thu, 1 Dec 2022 09:01:10 -0500 Subject: [PATCH 006/454] iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw() irq flood happen when run cat /sys/bus/iio/devices/iio:device0/in_voltage1_raw imx8qxp_adc_read_raw() { ... enable irq /* adc start */ writel(1, adc->regs + IMX8QXP_ADR_ADC_SWTRIG); ^^^^ trigger irq flood. wait_for_completion_interruptible_timeout(); readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO); ^^^^ clear irq here. ... } There is only FIFO watermark interrupt at this ADC controller. IRQ line will be assert until software read data from FIFO. So IRQ flood happen during wait_for_completion_interruptible_timeout(). Move FIFO read into irq handle to avoid irq flood. Fixes: 1e23dcaa1a9f ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Cc: stable@vger.kernel.org Signed-off-by: Frank Li Reviewed-by: Cai Huoqing Reviewed-by: Haibo Chen Link: https://lore.kernel.org/r/20221201140110.2653501-1-Frank.Li@nxp.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/imx8qxp-adc.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c index 36777b827165..f5a0fc9e64c5 100644 --- a/drivers/iio/adc/imx8qxp-adc.c +++ b/drivers/iio/adc/imx8qxp-adc.c @@ -86,6 +86,8 @@ #define IMX8QXP_ADC_TIMEOUT msecs_to_jiffies(100) +#define IMX8QXP_ADC_MAX_FIFO_SIZE 16 + struct imx8qxp_adc { struct device *dev; void __iomem *regs; @@ -95,6 +97,7 @@ struct imx8qxp_adc { /* Serialise ADC channel reads */ struct mutex lock; struct completion completion; + u32 fifo[IMX8QXP_ADC_MAX_FIFO_SIZE]; }; #define IMX8QXP_ADC_CHAN(_idx) { \ @@ -238,8 +241,7 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev, return ret; } - *val = FIELD_GET(IMX8QXP_ADC_RESFIFO_VAL_MASK, - readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO)); + *val = adc->fifo[0]; mutex_unlock(&adc->lock); return IIO_VAL_INT; @@ -265,10 +267,15 @@ static irqreturn_t imx8qxp_adc_isr(int irq, void *dev_id) { struct imx8qxp_adc *adc = dev_id; u32 fifo_count; + int i; fifo_count = FIELD_GET(IMX8QXP_ADC_FCTRL_FCOUNT_MASK, readl(adc->regs + IMX8QXP_ADR_ADC_FCTRL)); + for (i = 0; i < fifo_count; i++) + adc->fifo[i] = FIELD_GET(IMX8QXP_ADC_RESFIFO_VAL_MASK, + readl_relaxed(adc->regs + IMX8QXP_ADR_ADC_RESFIFO)); + if (fifo_count) complete(&adc->completion); From f804bd0dc28683a93a60f271aaefb2fc5b0853dd Mon Sep 17 00:00:00 2001 From: Andreas Kemnade Date: Thu, 1 Dec 2022 19:16:35 +0100 Subject: [PATCH 007/454] iio:adc:twl6030: Enable measurements of VUSB, VBAT and others Some inputs need to be wired up to produce proper measurements, without this change only near zero values are reported. Signed-off-by: Andreas Kemnade Fixes: 1696f36482e70 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Link: https://lore.kernel.org/r/20221201181635.3522962-1-andreas@kemnade.info Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/twl6030-gpadc.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c index f53e8558b560..40438e5b4970 100644 --- a/drivers/iio/adc/twl6030-gpadc.c +++ b/drivers/iio/adc/twl6030-gpadc.c @@ -57,6 +57,18 @@ #define TWL6030_GPADCS BIT(1) #define TWL6030_GPADCR BIT(0) +#define USB_VBUS_CTRL_SET 0x04 +#define USB_ID_CTRL_SET 0x06 + +#define TWL6030_MISC1 0xE4 +#define VBUS_MEAS 0x01 +#define ID_MEAS 0x01 + +#define VAC_MEAS 0x04 +#define VBAT_MEAS 0x02 +#define BB_MEAS 0x01 + + /** * struct twl6030_chnl_calib - channel calibration * @gain: slope coefficient for ideal curve @@ -927,6 +939,26 @@ static int twl6030_gpadc_probe(struct platform_device *pdev) return ret; } + ret = twl_i2c_write_u8(TWL_MODULE_USB, VBUS_MEAS, USB_VBUS_CTRL_SET); + if (ret < 0) { + dev_err(dev, "failed to wire up inputs\n"); + return ret; + } + + ret = twl_i2c_write_u8(TWL_MODULE_USB, ID_MEAS, USB_ID_CTRL_SET); + if (ret < 0) { + dev_err(dev, "failed to wire up inputs\n"); + return ret; + } + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, + VBAT_MEAS | BB_MEAS | BB_MEAS, + TWL6030_MISC1); + if (ret < 0) { + dev_err(dev, "failed to wire up inputs\n"); + return ret; + } + indio_dev->name = DRIVER_NAME; indio_dev->info = &twl6030_gpadc_iio_info; indio_dev->modes = INDIO_DIRECT_MODE; From 429e1e8ec696e0e7a0742904e3dc2f83b7b23dfb Mon Sep 17 00:00:00 2001 From: Carlos Song Date: Thu, 8 Dec 2022 15:19:05 +0800 Subject: [PATCH 008/454] iio: imu: fxos8700: fix map label of channel type to MAGN sensor FXOS8700 is an IMU sensor with ACCEL sensor and MAGN sensor. Sensor type is indexed by corresponding channel type in a switch. IIO_ANGL_VEL channel type mapped to MAGN sensor has caused confusion. Fix the mapping label of "IIO_MAGN" channel type instead of "IIO_ANGL_VEL" channel type to MAGN sensor. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song Link: https://lore.kernel.org/r/20221208071911.2405922-2-carlos.song@nxp.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/fxos8700_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/imu/fxos8700_core.c b/drivers/iio/imu/fxos8700_core.c index 423cfe526f2a..235b02b2f4e5 100644 --- a/drivers/iio/imu/fxos8700_core.c +++ b/drivers/iio/imu/fxos8700_core.c @@ -320,7 +320,7 @@ static enum fxos8700_sensor fxos8700_to_sensor(enum iio_chan_type iio_type) switch (iio_type) { case IIO_ACCEL: return FXOS8700_ACCEL; - case IIO_ANGL_VEL: + case IIO_MAGN: return FXOS8700_MAGN; default: return -EINVAL; From c68b44bc7d9b1469774a1c985ee71d2cbc5ebef5 Mon Sep 17 00:00:00 2001 From: Carlos Song Date: Thu, 8 Dec 2022 15:19:06 +0800 Subject: [PATCH 009/454] iio: imu: fxos8700: fix swapped ACCEL and MAGN channels readback Because ACCEL and MAGN channels data register base address is swapped the accelerometer and magnetometer channels readback is swapped. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song Link: https://lore.kernel.org/r/20221208071911.2405922-3-carlos.song@nxp.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/fxos8700_core.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/iio/imu/fxos8700_core.c b/drivers/iio/imu/fxos8700_core.c index 235b02b2f4e5..977eb7dc7dbd 100644 --- a/drivers/iio/imu/fxos8700_core.c +++ b/drivers/iio/imu/fxos8700_core.c @@ -395,9 +395,22 @@ static int fxos8700_get_data(struct fxos8700_data *data, int chan_type, { u8 base, reg; int ret; - enum fxos8700_sensor type = fxos8700_to_sensor(chan_type); - base = type ? FXOS8700_OUT_X_MSB : FXOS8700_M_OUT_X_MSB; + /* + * Different register base addresses varies with channel types. + * This bug hasn't been noticed before because using an enum is + * really hard to read. Use an a switch statement to take over that. + */ + switch (chan_type) { + case IIO_ACCEL: + base = FXOS8700_OUT_X_MSB; + break; + case IIO_MAGN: + base = FXOS8700_M_OUT_X_MSB; + break; + default: + return -EINVAL; + } /* Block read 6 bytes of device output registers to avoid data loss */ ret = regmap_bulk_read(data->regmap, base, data->buf, From 37a94d86d7050665d6d01378b2c916c28e454f10 Mon Sep 17 00:00:00 2001 From: Carlos Song Date: Thu, 8 Dec 2022 15:19:07 +0800 Subject: [PATCH 010/454] iio: imu: fxos8700: fix incomplete ACCEL and MAGN channels readback The length of ACCEL and MAGN 3-axis channels output data is 6 byte individually. However block only read 3 bytes data into buffer from ACCEL or MAGN output data registers every time. It causes an incomplete ACCEL and MAGN channels readback. Set correct value count for regmap_bulk_read to get 6 bytes ACCEL and MAGN channels readback. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song Link: https://lore.kernel.org/r/20221208071911.2405922-4-carlos.song@nxp.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/fxos8700_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/imu/fxos8700_core.c b/drivers/iio/imu/fxos8700_core.c index 977eb7dc7dbd..b62bc92bbacc 100644 --- a/drivers/iio/imu/fxos8700_core.c +++ b/drivers/iio/imu/fxos8700_core.c @@ -414,7 +414,7 @@ static int fxos8700_get_data(struct fxos8700_data *data, int chan_type, /* Block read 6 bytes of device output registers to avoid data loss */ ret = regmap_bulk_read(data->regmap, base, data->buf, - FXOS8700_DATA_BUF_SIZE); + sizeof(data->buf)); if (ret) return ret; From a53f945879c0cb9de3a4c05a665f5157884b5208 Mon Sep 17 00:00:00 2001 From: Carlos Song Date: Thu, 8 Dec 2022 15:19:08 +0800 Subject: [PATCH 011/454] iio: imu: fxos8700: fix IMU data bits returned to user space ACCEL output data registers contain the X-axis, Y-axis, and Z-axis 14-bit left-justified sample data and MAGN output data registers contain the X-axis, Y-axis, and Z-axis 16-bit sample data. The ACCEL raw register output data should be divided by 4 before sent to userspace. Apply a 2 bits signed right shift to the raw data from ACCEL output data register but keep that from MAGN sensor as the origin. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song Link: https://lore.kernel.org/r/20221208071911.2405922-5-carlos.song@nxp.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/fxos8700_core.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/iio/imu/fxos8700_core.c b/drivers/iio/imu/fxos8700_core.c index b62bc92bbacc..06948a8cc315 100644 --- a/drivers/iio/imu/fxos8700_core.c +++ b/drivers/iio/imu/fxos8700_core.c @@ -394,6 +394,7 @@ static int fxos8700_get_data(struct fxos8700_data *data, int chan_type, int axis, int *val) { u8 base, reg; + s16 tmp; int ret; /* @@ -421,8 +422,33 @@ static int fxos8700_get_data(struct fxos8700_data *data, int chan_type, /* Convert axis to buffer index */ reg = axis - IIO_MOD_X; + /* + * Convert to native endianness. The accel data and magn data + * are signed, so a forced type conversion is needed. + */ + tmp = be16_to_cpu(data->buf[reg]); + + /* + * ACCEL output data registers contain the X-axis, Y-axis, and Z-axis + * 14-bit left-justified sample data and MAGN output data registers + * contain the X-axis, Y-axis, and Z-axis 16-bit sample data. Apply + * a signed 2 bits right shift to the readback raw data from ACCEL + * output data register and keep that from MAGN sensor as the origin. + * Value should be extended to 32 bit. + */ + switch (chan_type) { + case IIO_ACCEL: + tmp = tmp >> 2; + break; + case IIO_MAGN: + /* Nothing to do */ + break; + default: + return -EINVAL; + } + /* Convert to native endianness */ - *val = sign_extend32(be16_to_cpu(data->buf[reg]), 15); + *val = sign_extend32(tmp, 15); return 0; } From 9d61c1820598a5ea474576ed55318a6dadee37ed Mon Sep 17 00:00:00 2001 From: Carlos Song Date: Thu, 8 Dec 2022 15:19:09 +0800 Subject: [PATCH 012/454] iio: imu: fxos8700: fix ACCEL measurement range selection When device is in active mode, it fails to set an ACCEL full-scale range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. This is not align with the datasheet, but it is a fxos8700 chip behavior. Keep the device in standby mode before setting ACCEL full-scale range into FXOS8700_XYZ_DATA_CFG in chip initialization phase and setting scale phase. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song Link: https://lore.kernel.org/r/20221208071911.2405922-6-carlos.song@nxp.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/fxos8700_core.c | 41 +++++++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 7 deletions(-) diff --git a/drivers/iio/imu/fxos8700_core.c b/drivers/iio/imu/fxos8700_core.c index 06948a8cc315..ec622123ccac 100644 --- a/drivers/iio/imu/fxos8700_core.c +++ b/drivers/iio/imu/fxos8700_core.c @@ -345,7 +345,8 @@ static int fxos8700_set_active_mode(struct fxos8700_data *data, static int fxos8700_set_scale(struct fxos8700_data *data, enum fxos8700_sensor t, int uscale) { - int i; + int i, ret, val; + bool active_mode; static const int scale_num = ARRAY_SIZE(fxos8700_accel_scale); struct device *dev = regmap_get_device(data->regmap); @@ -354,6 +355,25 @@ static int fxos8700_set_scale(struct fxos8700_data *data, return -EINVAL; } + /* + * When device is in active mode, it failed to set an ACCEL + * full-scale range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. + * This is not align with the datasheet, but it is a fxos8700 + * chip behavier. Set the device in standby mode before setting + * an ACCEL full-scale range. + */ + ret = regmap_read(data->regmap, FXOS8700_CTRL_REG1, &val); + if (ret) + return ret; + + active_mode = val & FXOS8700_ACTIVE; + if (active_mode) { + ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, + val & ~FXOS8700_ACTIVE); + if (ret) + return ret; + } + for (i = 0; i < scale_num; i++) if (fxos8700_accel_scale[i].uscale == uscale) break; @@ -361,8 +381,12 @@ static int fxos8700_set_scale(struct fxos8700_data *data, if (i == scale_num) return -EINVAL; - return regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, + ret = regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, fxos8700_accel_scale[i].bits); + if (ret) + return ret; + return regmap_write(data->regmap, FXOS8700_CTRL_REG1, + active_mode); } static int fxos8700_get_scale(struct fxos8700_data *data, @@ -631,14 +655,17 @@ static int fxos8700_chip_init(struct fxos8700_data *data, bool use_spi) if (ret) return ret; - /* Max ODR (800Hz individual or 400Hz hybrid), active mode */ - ret = regmap_write(data->regmap, FXOS8700_CTRL_REG1, - FXOS8700_CTRL_ODR_MAX | FXOS8700_ACTIVE); + /* + * Set max full-scale range (+/-8G) for ACCEL sensor in chip + * initialization then activate the device. + */ + ret = regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, MODE_8G); if (ret) return ret; - /* Set for max full-scale range (+/-8G) */ - return regmap_write(data->regmap, FXOS8700_XYZ_DATA_CFG, MODE_8G); + /* Max ODR (800Hz individual or 400Hz hybrid), active mode */ + return regmap_write(data->regmap, FXOS8700_CTRL_REG1, + FXOS8700_CTRL_ODR_MAX | FXOS8700_ACTIVE); } static void fxos8700_chip_uninit(void *data) From bffb7d9d1a3dbd09e083b88aefd093b3b10abbfb Mon Sep 17 00:00:00 2001 From: Andreas Kemnade Date: Sat, 17 Dec 2022 23:13:05 +0100 Subject: [PATCH 013/454] iio:adc:twl6030: Enable measurement of VAC VAC needs to be wired up to produce proper measurements, without this change only near zero values are reported. Reported-by: kernel test robot Reported-by: Julia Lawall Fixes: 1696f36482e7 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Signed-off-by: Andreas Kemnade Link: https://lore.kernel.org/r/20221217221305.671117-1-andreas@kemnade.info Signed-off-by: Jonathan Cameron --- drivers/iio/adc/twl6030-gpadc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c index 40438e5b4970..32873fb5f367 100644 --- a/drivers/iio/adc/twl6030-gpadc.c +++ b/drivers/iio/adc/twl6030-gpadc.c @@ -952,7 +952,7 @@ static int twl6030_gpadc_probe(struct platform_device *pdev) } ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, - VBAT_MEAS | BB_MEAS | BB_MEAS, + VBAT_MEAS | BB_MEAS | VAC_MEAS, TWL6030_MISC1); if (ret < 0) { dev_err(dev, "failed to wire up inputs\n"); From 65ea840afd508194b0ee903256162aa87e46ec30 Mon Sep 17 00:00:00 2001 From: Zheng Yongjun Date: Sat, 26 Nov 2022 07:14:30 +0000 Subject: [PATCH 014/454] fpga: stratix10-soc: Fix return value check in s10_ops_write_init() In case of error, the function stratix10_svc_allocate_memory() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: e7eef1d7633a ("fpga: add intel stratix10 soc fpga manager driver") Signed-off-by: Zheng Yongjun Reviewed-by: Russ Weight Cc: stable@vger.kernel.org Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20221126071430.19540-1-zhengyongjun3@huawei.com Signed-off-by: Xu Yilun --- drivers/fpga/stratix10-soc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c index 357cea58ec98..f7f01982a512 100644 --- a/drivers/fpga/stratix10-soc.c +++ b/drivers/fpga/stratix10-soc.c @@ -213,9 +213,9 @@ static int s10_ops_write_init(struct fpga_manager *mgr, /* Allocate buffers from the service layer's pool. */ for (i = 0; i < NUM_SVC_BUFS; i++) { kbuf = stratix10_svc_allocate_memory(priv->chan, SVC_BUF_SIZE); - if (!kbuf) { + if (IS_ERR(kbuf)) { s10_free_buffers(mgr); - ret = -ENOMEM; + ret = PTR_ERR(kbuf); goto init_done; } From 60ce26d10e5850f33cc76fce52f5377045e75a15 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Wed, 14 Dec 2022 16:49:52 +0200 Subject: [PATCH 015/454] fpga: m10bmc-sec: Fix probe rollback MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Handle probe error rollbacks properly to avoid leaks. Fixes: 5cd339b370e2 ("fpga: m10bmc-sec: add max10 secure update functions") Reviewed-by: Matthew Gerlach Reviewed-by: Russ Weight Reviewed-by: Marco Pagani Signed-off-by: Ilpo Järvinen Cc: stable@vger.kernel.org Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20221214144952.8392-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Xu Yilun --- drivers/fpga/intel-m10-bmc-sec-update.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c index 79d48852825e..03f1bd81c434 100644 --- a/drivers/fpga/intel-m10-bmc-sec-update.c +++ b/drivers/fpga/intel-m10-bmc-sec-update.c @@ -574,20 +574,27 @@ static int m10bmc_sec_probe(struct platform_device *pdev) len = scnprintf(buf, SEC_UPDATE_LEN_MAX, "secure-update%d", sec->fw_name_id); sec->fw_name = kmemdup_nul(buf, len, GFP_KERNEL); - if (!sec->fw_name) - return -ENOMEM; + if (!sec->fw_name) { + ret = -ENOMEM; + goto fw_name_fail; + } fwl = firmware_upload_register(THIS_MODULE, sec->dev, sec->fw_name, &m10bmc_ops, sec); if (IS_ERR(fwl)) { dev_err(sec->dev, "Firmware Upload driver failed to start\n"); - kfree(sec->fw_name); - xa_erase(&fw_upload_xa, sec->fw_name_id); - return PTR_ERR(fwl); + ret = PTR_ERR(fwl); + goto fw_uploader_fail; } sec->fwl = fwl; return 0; + +fw_uploader_fail: + kfree(sec->fw_name); +fw_name_fail: + xa_erase(&fw_upload_xa, sec->fw_name_id); + return ret; } static int m10bmc_sec_remove(struct platform_device *pdev) From ec64efc4966edf19fa1bc398a26bddfbadc1605f Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 5 Dec 2022 17:44:59 +0000 Subject: [PATCH 016/454] dt-bindings: riscv: fix underscore requirement for multi-letter extensions The RISC-V ISA Manual allows the first multi-letter extension to avoid a leading underscore. Underscores are only required between multi-letter extensions. The dt-binding does not validate that a multi-letter extension is canonically ordered, as that'd need an even worse regex than is here, but it should not fail validation for valid ISA strings. Allow the first multi-letter extension to appear immediately after the single-letter extensions. Link: https://github.com/riscv/riscv-isa-manual/releases/tag/riscv-unpriv-pdf-from-asciidoc-15112022 # Chapter 29.5 Fixes: 299824e68bd0 ("dt-bindings: riscv: add new riscv,isa strings for emulators") Acked-by: Guo Ren Signed-off-by: Conor Dooley Acked-by: Rob Herring Reviewed-by: Palmer Dabbelt Acked-by: Palmer Dabbelt Link: https://lore.kernel.org/r/20221205174459.60195-2-conor@kernel.org Signed-off-by: Palmer Dabbelt --- Documentation/devicetree/bindings/riscv/cpus.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 90a7cabf58fe..97659bb71811 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -80,7 +80,7 @@ properties: insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. $ref: "/schemas/types.yaml#/definitions/string" - pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$ + pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$ # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false From a943385aa80151c6b2611d3a1cf8338af2b257a1 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 5 Dec 2022 17:45:00 +0000 Subject: [PATCH 017/454] dt-bindings: riscv: fix single letter canonical order I used the wikipedia table for ordering extensions when updating the pattern here in commit 299824e68bd0 ("dt-bindings: riscv: add new riscv,isa strings for emulators"). Unfortunately that table did not match canonical order, as defined by the RISC-V ISA Manual, which defines extension ordering in (what is currently) Table 41, "Standard ISA extension names". Fix things up by re-sorting v (vector) and adding p (packed-simd) & j (dynamic languages). The e (reduced integer) and g (general) extensions are still intentionally left out. Link: https://github.com/riscv/riscv-isa-manual/releases/tag/riscv-unpriv-pdf-from-asciidoc-15112022 # Chapter 29.5 Fixes: 299824e68bd0 ("dt-bindings: riscv: add new riscv,isa strings for emulators") Acked-by: Guo Ren Reviewed-by: Heiko Stuebner Reviewed-by: Palmer Dabbelt Acked-by: Palmer Dabbelt Signed-off-by: Conor Dooley Acked-by: Rob Herring Link: https://lore.kernel.org/r/20221205174459.60195-3-conor@kernel.org Signed-off-by: Palmer Dabbelt --- Documentation/devicetree/bindings/riscv/cpus.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 97659bb71811..d4148418350c 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -80,7 +80,7 @@ properties: insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. $ref: "/schemas/types.yaml#/definitions/string" - pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$ + pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$ # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false From c9c1d6d82091f05b4dabf2c624bdaeba19bdf893 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 3 Jan 2023 15:03:48 +0200 Subject: [PATCH 018/454] iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m The following kernel linkage error: st_lsm6dsx_core.o: in function `st_lsm6dsx_sw_buffers_setup': st_lsm6dsx_core.c:2578: undefined reference to `devm_iio_triggered_buffer_setup_ext' is caused by the fact that the object owning devm_iio_triggered_buffer_setup_ext() (drivers/iio/buffer/industrialio-triggered-buffer.o) is allowed to be built as module when its user (drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c) is built-in. The st_lsm6dsx driver already has a "select IIO_BUFFER", so add another select for IIO_TRIGGERED_BUFFER, to make that option follow what is set for the st_lsm6dsx driver. This is similar to what other iio drivers do. Fixes: 2cfb2180c3e8 ("iio: imu: st_lsm6dsx: introduce sw trigger support") Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20230103130348.1733467-1-vladimir.oltean@nxp.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index f6660847fb58..8c16cdacf2f2 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -4,6 +4,7 @@ config IIO_ST_LSM6DSX tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" depends on (I2C || SPI || I3C) select IIO_BUFFER + select IIO_TRIGGERED_BUFFER select IIO_KFIFO_BUF select IIO_ST_LSM6DSX_I2C if (I2C) select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) From f71eaf2708be7831428eacae7db25d8ec6b8b4c5 Mon Sep 17 00:00:00 2001 From: Yuan Can Date: Wed, 23 Nov 2022 09:42:00 +0000 Subject: [PATCH 019/454] bus: sunxi-rsb: Fix error handling in sunxi_rsb_init() The sunxi_rsb_init() returns the platform_driver_register() directly without checking its return value, if platform_driver_register() failed, the sunxi_rsb_bus is not unregistered. Fix by unregister sunxi_rsb_bus when platform_driver_register() failed. Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Signed-off-by: Yuan Can Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20221123094200.12036-1-yuancan@huawei.com Signed-off-by: Jernej Skrabec --- drivers/bus/sunxi-rsb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c index 3aa91aed3bf7..226e87b85116 100644 --- a/drivers/bus/sunxi-rsb.c +++ b/drivers/bus/sunxi-rsb.c @@ -857,7 +857,13 @@ static int __init sunxi_rsb_init(void) return ret; } - return platform_driver_register(&sunxi_rsb_driver); + ret = platform_driver_register(&sunxi_rsb_driver); + if (ret) { + bus_unregister(&sunxi_rsb_bus); + return ret; + } + + return 0; } module_init(sunxi_rsb_init); From 2f440c4f04ca28e3ddf4bb6f3d25f7613abe2873 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 16 Dec 2022 01:05:52 +0100 Subject: [PATCH 020/454] arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC The GPIO watchdog property name is 'always-running', not 'always-enabled'. Use the correct property name and reinstate it into the DT. Fixes: eff6b33c9ce9 ("arm64: dts: imx8mm: Remove watchdog always-enabled property from eDM SBC") Signed-off-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts index 752f409a30b1..9889319d4f04 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts @@ -88,6 +88,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_watchdog_gpio>; compatible = "linux,wdt-gpio"; + always-running; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; hw_algo = "level"; /* Reset triggers in 2..3 seconds */ From fca053893e8d5be8173c92876c6329cbee78b880 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 2 Jan 2023 11:04:02 -0300 Subject: [PATCH 021/454] arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts' The following build warnings are seen when running: make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dtb: serial@30860000: cts-gpios: False schema does not allow [[33, 3, 1]] From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dtb: serial@30860000: rts-gpios: False schema does not allow [[33, 5, 1]] From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml ... The imx8m Venice Gateworks boards do not expose the UART RTS and CTS as native UART pins, so 'uart-has-rtscts' should not be used. Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination detected by serial.yaml. Fix the problem by removing the incorrect 'uart-has-rtscts' property. Fixes: 27c8f4ccc1b9 ("arm64: dts: imx8mm-venice-gw72xx-0x: add dt overlays for serial modes") Fixes: d9a9a7cf32c9 ("arm64: dts: imx8m{m,n}-venice-*: add missing uart-has-rtscts property to UARTs") Fixes: 870f645b396b ("arm64: dts: imx8mp-venice-gw74xx: add WiFi/BT module support") Signed-off-by: Fabio Estevam Acked-by: Tim Harvey Signed-off-by: Shawn Guo --- .../boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso | 1 - .../boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso | 1 - arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 1 - arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 3 --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 3 --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts | 1 - arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts | 1 - arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts | 1 - 8 files changed, 12 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso index 3ea73a6886ff..f6ad1a4b8b66 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso @@ -33,7 +33,6 @@ pinctrl-0 = <&pinctrl_uart2>; rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso index 2fa635e1c1a8..1f8ea20dfafc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso @@ -33,7 +33,6 @@ pinctrl-0 = <&pinctrl_uart2>; rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index 244ef8d6cc68..7761d5671cb1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -222,7 +222,6 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 6433c205f8dd..64b366e83fa1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -733,7 +733,6 @@ dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; @@ -749,7 +748,6 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; @@ -758,7 +756,6 @@ pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 32872b0b1aaf..e8bc1fccc47b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -664,7 +664,6 @@ pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; @@ -681,7 +680,6 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { @@ -699,7 +697,6 @@ dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index 8ce562246a08..acc2ba8e00a8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -581,7 +581,6 @@ dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index b9444e4a3d2d..7c12518dbc96 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -643,7 +643,6 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index ceeca4966fc5..8eb7d5ee38da 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -623,7 +623,6 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { From f2193bb2ee6e21d9c2da10ea3ce63b94aea69341 Mon Sep 17 00:00:00 2001 From: Xu Panda Date: Fri, 23 Dec 2022 10:40:56 +0800 Subject: [PATCH 022/454] parisc: pdc_stable: use strscpy() to instead of strncpy() The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL-terminated strings. Signed-off-by: Xu Panda Signed-off-by: Yang Yang Signed-off-by: Helge Deller --- drivers/parisc/pdc_stable.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index d6af5726ddf3..2a18f7ba2398 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -274,8 +274,7 @@ pdcspath_hwpath_write(struct pdcspath_entry *entry, const char *buf, size_t coun /* We'll use a local copy of buf */ count = min_t(size_t, count, sizeof(in)-1); - strncpy(in, buf, count); - in[count] = '\0'; + strscpy(in, buf, count + 1); /* Let's clean up the target. 0xff is a blank pattern */ memset(&hwpath, 0xff, sizeof(hwpath)); @@ -388,8 +387,7 @@ pdcspath_layer_write(struct pdcspath_entry *entry, const char *buf, size_t count /* We'll use a local copy of buf */ count = min_t(size_t, count, sizeof(in)-1); - strncpy(in, buf, count); - in[count] = '\0'; + strscpy(in, buf, count + 1); /* Let's clean up the target. 0 is a blank pattern */ memset(&layers, 0, sizeof(layers)); @@ -756,8 +754,7 @@ static ssize_t pdcs_auto_write(struct kobject *kobj, /* We'll use a local copy of buf */ count = min_t(size_t, count, sizeof(in)-1); - strncpy(in, buf, count); - in[count] = '\0'; + strscpy(in, buf, count + 1); /* Current flags are stored in primary boot path entry */ pathentry = &pdcspath_entry_primary; From 5d1335dabb3c493a3d6d5b233953b6ac7b6c1ff2 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 19 Dec 2022 20:56:36 +0100 Subject: [PATCH 023/454] parisc: Fix return code of pdc_iodc_print() There is an off-by-one if the printed string includes a new-line char. Cc: stable@vger.kernel.org Signed-off-by: Helge Deller --- arch/parisc/kernel/firmware.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index 4dfe1f49c5c8..6817892a2c58 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -1303,7 +1303,7 @@ static char iodc_dbuf[4096] __page_aligned_bss; */ int pdc_iodc_print(const unsigned char *str, unsigned count) { - unsigned int i; + unsigned int i, found = 0; unsigned long flags; count = min_t(unsigned int, count, sizeof(iodc_dbuf)); @@ -1315,6 +1315,7 @@ int pdc_iodc_print(const unsigned char *str, unsigned count) iodc_dbuf[i+0] = '\r'; iodc_dbuf[i+1] = '\n'; i += 2; + found = 1; goto print; default: iodc_dbuf[i] = str[i]; @@ -1330,7 +1331,7 @@ print: __pa(pdc_result), 0, __pa(iodc_dbuf), i, 0); spin_unlock_irqrestore(&pdc_lock, flags); - return i; + return i - found; } #if !defined(BOOTLOADER) From 5b3fc9988d1e4be268d834c2aaae85c75fa34253 Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Tue, 7 Jun 2022 21:23:29 +0200 Subject: [PATCH 024/454] fbdev: aty128fb: Use backlight helper Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt Cc: Paul Mackerras Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Sam Ravnborg Reviewed-by: Daniel Thompson Signed-off-by: Helge Deller --- drivers/video/fbdev/aty/aty128fb.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/video/fbdev/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c index dd31b9d7d337..36a9ac05a340 100644 --- a/drivers/video/fbdev/aty/aty128fb.c +++ b/drivers/video/fbdev/aty/aty128fb.c @@ -1766,12 +1766,10 @@ static int aty128_bl_update_status(struct backlight_device *bd) unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL); int level; - if (bd->props.power != FB_BLANK_UNBLANK || - bd->props.fb_blank != FB_BLANK_UNBLANK || - !par->lcd_on) + if (!par->lcd_on) level = 0; else - level = bd->props.brightness; + level = backlight_get_brightness(bd); reg |= LVDS_BL_MOD_EN | LVDS_BLON; if (level > 0) { From 1535ec976414d2ea8d29d40da6b5b99c91e0f2bf Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Tue, 7 Jun 2022 21:23:30 +0200 Subject: [PATCH 025/454] fbdev: atyfb: Use backlight helper Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Thompson Signed-off-by: Helge Deller --- drivers/video/fbdev/aty/atyfb_base.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c index d59215a4992e..b02e4e645035 100644 --- a/drivers/video/fbdev/aty/atyfb_base.c +++ b/drivers/video/fbdev/aty/atyfb_base.c @@ -2219,13 +2219,7 @@ static int aty_bl_update_status(struct backlight_device *bd) { struct atyfb_par *par = bl_get_data(bd); unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par); - int level; - - if (bd->props.power != FB_BLANK_UNBLANK || - bd->props.fb_blank != FB_BLANK_UNBLANK) - level = 0; - else - level = bd->props.brightness; + int level = backlight_get_brightness(bd); reg |= (BLMOD_EN | BIASMOD_EN); if (level > 0) { From c28509ef9c221378a586e72643fc43102f5512e9 Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Tue, 7 Jun 2022 21:23:31 +0200 Subject: [PATCH 026/454] fbdev: radeon: Use backlight helper Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt Cc: Benjamin Herrenschmidt Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Thompson Signed-off-by: Helge Deller --- drivers/video/fbdev/aty/radeon_backlight.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/video/fbdev/aty/radeon_backlight.c b/drivers/video/fbdev/aty/radeon_backlight.c index d2c1263ad260..427adc838f77 100644 --- a/drivers/video/fbdev/aty/radeon_backlight.c +++ b/drivers/video/fbdev/aty/radeon_backlight.c @@ -57,11 +57,7 @@ static int radeon_bl_update_status(struct backlight_device *bd) * backlight. This provides some greater power saving and the display * is useless without backlight anyway. */ - if (bd->props.power != FB_BLANK_UNBLANK || - bd->props.fb_blank != FB_BLANK_UNBLANK) - level = 0; - else - level = bd->props.brightness; + level = backlight_get_brightness(bd); del_timer_sync(&rinfo->lvds_timer); radeon_engine_idle(); From 973fcf37c267f937fbec656f4643571d7bd09a37 Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Tue, 7 Jun 2022 21:23:32 +0200 Subject: [PATCH 027/454] fbdev: mx3fb: Use backlight helper Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Thompson Signed-off-by: Helge Deller --- drivers/video/fbdev/mx3fb.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/video/fbdev/mx3fb.c b/drivers/video/fbdev/mx3fb.c index b945b68984b9..76771e126d0a 100644 --- a/drivers/video/fbdev/mx3fb.c +++ b/drivers/video/fbdev/mx3fb.c @@ -283,12 +283,7 @@ static int mx3fb_bl_get_brightness(struct backlight_device *bl) static int mx3fb_bl_update_status(struct backlight_device *bl) { struct mx3fb_data *fbd = bl_get_data(bl); - int brightness = bl->props.brightness; - - if (bl->props.power != FB_BLANK_UNBLANK) - brightness = 0; - if (bl->props.fb_blank != FB_BLANK_UNBLANK) - brightness = 0; + int brightness = backlight_get_brightness(bl); fbd->backlight_level = (fbd->backlight_level & ~0xFF) | brightness; From 1cc17590ddfec590d7301f5e4cf6183ea19afa25 Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Tue, 7 Jun 2022 21:23:33 +0200 Subject: [PATCH 028/454] fbdev: nvidia: Use backlight helper Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt Cc: Antonino Daplas Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Thompson Signed-off-by: Helge Deller --- drivers/video/fbdev/nvidia/nv_backlight.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/video/fbdev/nvidia/nv_backlight.c b/drivers/video/fbdev/nvidia/nv_backlight.c index 2ce53529f636..503a7a683855 100644 --- a/drivers/video/fbdev/nvidia/nv_backlight.c +++ b/drivers/video/fbdev/nvidia/nv_backlight.c @@ -49,17 +49,11 @@ static int nvidia_bl_update_status(struct backlight_device *bd) { struct nvidia_par *par = bl_get_data(bd); u32 tmp_pcrt, tmp_pmc, fpcontrol; - int level; + int level = backlight_get_brightness(bd); if (!par->FlatPanel) return 0; - if (bd->props.power != FB_BLANK_UNBLANK || - bd->props.fb_blank != FB_BLANK_UNBLANK) - level = 0; - else - level = bd->props.brightness; - tmp_pmc = NV_RD32(par->PMC, 0x10F0) & 0x0000FFFF; tmp_pcrt = NV_RD32(par->PCRTC0, 0x081C) & 0xFFFFFFFC; fpcontrol = NV_RD32(par->PRAMDAC, 0x0848) & 0xCFFFFFCC; From 450afd92d9cb177e0337c9ac26677765aeeff81a Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Tue, 7 Jun 2022 21:23:34 +0200 Subject: [PATCH 029/454] fbdev: omapfb: panel-dsi-cm: Use backlight helper Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt Cc: Helge Deller Cc: linux-omap@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Thompson Signed-off-by: Helge Deller --- drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c index 4fc4b26a8d30..ba94a0a7bd4f 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c @@ -331,13 +331,7 @@ static int dsicm_bl_update_status(struct backlight_device *dev) struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev); struct omap_dss_device *in = ddata->in; int r; - int level; - - if (dev->props.fb_blank == FB_BLANK_UNBLANK && - dev->props.power == FB_BLANK_UNBLANK) - level = dev->props.brightness; - else - level = 0; + int level = backlight_get_brightness(dev); dev_dbg(&ddata->pdev->dev, "update brightness to %d\n", level); From 8791906e667e44eddd62b341196f93911da8a578 Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Tue, 7 Jun 2022 21:23:35 +0200 Subject: [PATCH 030/454] fbdev: riva: Use backlight helper Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt Cc: Antonino Daplas Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Thompson Signed-off-by: Helge Deller --- drivers/video/fbdev/riva/fbdev.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/video/fbdev/riva/fbdev.c b/drivers/video/fbdev/riva/fbdev.c index 644278146d3b..41edc6e79460 100644 --- a/drivers/video/fbdev/riva/fbdev.c +++ b/drivers/video/fbdev/riva/fbdev.c @@ -293,13 +293,7 @@ static int riva_bl_update_status(struct backlight_device *bd) { struct riva_par *par = bl_get_data(bd); U032 tmp_pcrt, tmp_pmc; - int level; - - if (bd->props.power != FB_BLANK_UNBLANK || - bd->props.fb_blank != FB_BLANK_UNBLANK) - level = 0; - else - level = bd->props.brightness; + int level = backlight_get_brightness(bd); tmp_pmc = NV_RD32(par->riva.PMC, 0x10F0) & 0x0000FFFF; tmp_pcrt = NV_RD32(par->riva.PCRTC0, 0x081C) & 0xFFFFFFFC; From cfb47bf5a470bdd80e8ac2f7b2f3a34563ecd4ea Mon Sep 17 00:00:00 2001 From: Frank Li Date: Wed, 4 Jan 2023 16:07:40 -0500 Subject: [PATCH 031/454] arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode linux,keycode should be "linux,keycodes" according binding-doc Documentation/devicetree/bindings/input/fsl,scu-key.yaml Fixes: f537ee7f1e76 ("arm64: dts: freescale: add i.MX8DXL SoC support") Signed-off-by: Frank Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi index 0c64b9194621..214f21bd0cb4 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -164,7 +164,7 @@ sc_pwrkey: keys { compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; - linux,keycode = ; + linux,keycodes = ; wakeup-source; }; From c8c37bc514514999e62a17e95160ed9ebf75ca8d Mon Sep 17 00:00:00 2001 From: Lareine Khawaly Date: Wed, 21 Dec 2022 19:59:00 +0000 Subject: [PATCH 032/454] i2c: designware: use casting of u64 in clock multiplication to avoid overflow In functions i2c_dw_scl_lcnt() and i2c_dw_scl_hcnt() may have overflow by depending on the values of the given parameters including the ic_clk. For example in our use case where ic_clk is larger than one million, multiplication of ic_clk * 4700 will result in 32 bit overflow. Add cast of u64 to the calculation to avoid multiplication overflow, and use the corresponding define for divide. Fixes: 2373f6b9744d ("i2c-designware: split of i2c-designware.c into core and bus specific parts") Signed-off-by: Lareine Khawaly Signed-off-by: Hanna Hawa Reviewed-by: Andy Shevchenko Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-common.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index a3240ece55b2..581e02cc979a 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -351,7 +351,8 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) * * If your hardware is free from tHD;STA issue, try this one. */ - return DIV_ROUND_CLOSEST(ic_clk * tSYMBOL, MICRO) - 8 + offset; + return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * tSYMBOL, MICRO) - + 8 + offset; else /* * Conditional expression: @@ -367,7 +368,8 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) * The reason why we need to take into account "tf" here, * is the same as described in i2c_dw_scl_lcnt(). */ - return DIV_ROUND_CLOSEST(ic_clk * (tSYMBOL + tf), MICRO) - 3 + offset; + return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * (tSYMBOL + tf), MICRO) - + 3 + offset; } u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) @@ -383,7 +385,8 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) * account the fall time of SCL signal (tf). Default tf value * should be 0.3 us, for safety. */ - return DIV_ROUND_CLOSEST(ic_clk * (tLOW + tf), MICRO) - 1 + offset; + return DIV_ROUND_CLOSEST_ULL((u64)ic_clk * (tLOW + tf), MICRO) - + 1 + offset; } int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev) From 75507a319876aba88932e2c7dab58b6c22d89f6b Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Mon, 19 Dec 2022 13:01:45 +0000 Subject: [PATCH 033/454] i2c: designware: Fix unbalanced suspended flag Ensure that i2c_mark_adapter_suspended() is always balanced by a call to i2c_mark_adapter_resumed(). dw_i2c_plat_resume() must always be called, so that i2c_mark_adapter_resumed() is called. This is not compatible with DPM_FLAG_MAY_SKIP_RESUME, so remove the flag. Since the controller is always resumed on system resume the dw_i2c_plat_complete() callback is redundant and has been removed. The unbalanced suspended flag was introduced by commit c57813b8b288 ("i2c: designware: Lock the adapter while setting the suspended flag") Before that commit, the system and runtime PM used the same functions. The DPM_FLAG_MAY_SKIP_RESUME was used to skip the system resume if the driver had been in runtime-suspend. If system resume was skipped, the suspended flag would be cleared by the next runtime resume. The check of the suspended flag was _after_ the call to pm_runtime_get_sync() in i2c_dw_xfer(). So either a system resume or a runtime resume would clear the flag before it was checked. Having introduced the unbalanced suspended flag with that commit, a further commit 80704a84a9f8 ("i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers") changed from using a local suspended flag to using the i2c_mark_adapter_suspended/resumed() functions. These use a flag that is checked by I2C core code before issuing the transfer to the bus driver, so there was no opportunity for the bus driver to runtime resume itself before the flag check. Signed-off-by: Richard Fitzgerald Fixes: c57813b8b288 ("i2c: designware: Lock the adapter while setting the suspended flag") Reviewed-by: Hans de Goede Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index ba043b547393..74182db03a88 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -351,13 +351,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) if (dev->flags & ACCESS_NO_IRQ_SUSPEND) { dev_pm_set_driver_flags(&pdev->dev, - DPM_FLAG_SMART_PREPARE | - DPM_FLAG_MAY_SKIP_RESUME); + DPM_FLAG_SMART_PREPARE); } else { dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_SMART_PREPARE | - DPM_FLAG_SMART_SUSPEND | - DPM_FLAG_MAY_SKIP_RESUME); + DPM_FLAG_SMART_SUSPEND); } device_enable_async_suspend(&pdev->dev); @@ -419,21 +417,8 @@ static int dw_i2c_plat_prepare(struct device *dev) */ return !has_acpi_companion(dev); } - -static void dw_i2c_plat_complete(struct device *dev) -{ - /* - * The device can only be in runtime suspend at this point if it has not - * been resumed throughout the ending system suspend/resume cycle, so if - * the platform firmware might mess up with it, request the runtime PM - * framework to resume it. - */ - if (pm_runtime_suspended(dev) && pm_resume_via_firmware()) - pm_request_resume(dev); -} #else #define dw_i2c_plat_prepare NULL -#define dw_i2c_plat_complete NULL #endif #ifdef CONFIG_PM @@ -483,7 +468,6 @@ static int __maybe_unused dw_i2c_plat_resume(struct device *dev) static const struct dev_pm_ops dw_i2c_dev_pm_ops = { .prepare = dw_i2c_plat_prepare, - .complete = dw_i2c_plat_complete, SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume) SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL) }; From 2ece0930ac5662bccce0ba4c59b84c98d2437200 Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Mon, 2 Jan 2023 22:39:55 +0530 Subject: [PATCH 034/454] i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU Add additional supported PCI IDs for latest AMD NAVI GPU card which has an integrated Type-C controller and designware I2C with PCI interface. Signed-off-by: Basavaraj Natikar Tested-by: Sanath S Reviewed-by: Andy Shevchenko Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-pcidrv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index e499f96506c5..782fe1ef3ca1 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -396,6 +396,8 @@ static const struct pci_device_id i2_designware_pci_ids[] = { { PCI_VDEVICE(ATI, 0x73a4), navi_amd }, { PCI_VDEVICE(ATI, 0x73e4), navi_amd }, { PCI_VDEVICE(ATI, 0x73c4), navi_amd }, + { PCI_VDEVICE(ATI, 0x7444), navi_amd }, + { PCI_VDEVICE(ATI, 0x7464), navi_amd }, { 0,} }; MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); From 78a4471fa1a76a8bef4919105de67660a89a1e9b Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 7 Jan 2023 13:32:29 +0100 Subject: [PATCH 035/454] i2c: mxs: suppress probe-deferral error message During boot of I2SE Duckbill the kernel log contains a confusing error: Failed to request dma This is caused by i2c-mxs tries to request a not yet available DMA channel (-EPROBE_DEFER). So suppress this message by using dev_err_probe(). Signed-off-by: Stefan Wahren Reviewed-by: Fabio Estevam Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 5af5cffc444e..d113bed79545 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -826,8 +826,8 @@ static int mxs_i2c_probe(struct platform_device *pdev) /* Setup the DMA */ i2c->dmach = dma_request_chan(dev, "rx-tx"); if (IS_ERR(i2c->dmach)) { - dev_err(dev, "Failed to request dma\n"); - return PTR_ERR(i2c->dmach); + return dev_err_probe(dev, PTR_ERR(i2c->dmach), + "Failed to request dma\n"); } platform_set_drvdata(pdev, i2c); From ee4202db16e59e792f570092ad1f440f2d31ea03 Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Mon, 9 Jan 2023 21:02:38 +0100 Subject: [PATCH 036/454] fbdev: atmel_lcdfb: Rework backlight status updates Instead of checking the state of various backlight_properties fields against the memorised state in atmel_lcdfb_info.bl_power, atmel_bl_update_status() should retrieve the desired state using backlight_get_brightness (which takes into account the power state, blanking etc.). This means the explicit checks using props.fb_blank and props.power can be dropped. The backlight framework ensures that backlight is never negative, so the test before reading the brightness from the hardware always ends up false and the whole block can be removed. The framework retrieves the brightness from the hardware through atmel_bl_get_brightness() when necessary. As a result, bl_power in struct atmel_lcdfb_info is no longer necessary, so remove that while we're at it. Since we only ever care about reading the current state in backlight_properties, drop the updates at the end of the function. Signed-off-by: Stephen Kitt Acked-by: Sam Ravnborg Signed-off-by: Helge Deller --- drivers/video/fbdev/atmel_lcdfb.c | 22 +--------------------- 1 file changed, 1 insertion(+), 21 deletions(-) diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c index 1fc8de4ecbeb..8187a7c4f910 100644 --- a/drivers/video/fbdev/atmel_lcdfb.c +++ b/drivers/video/fbdev/atmel_lcdfb.c @@ -49,7 +49,6 @@ struct atmel_lcdfb_info { struct clk *lcdc_clk; struct backlight_device *backlight; - u8 bl_power; u8 saved_lcdcon; u32 pseudo_palette[16]; @@ -109,22 +108,7 @@ static u32 contrast_ctr = ATMEL_LCDC_PS_DIV8 static int atmel_bl_update_status(struct backlight_device *bl) { struct atmel_lcdfb_info *sinfo = bl_get_data(bl); - int power = sinfo->bl_power; - int brightness = bl->props.brightness; - - /* REVISIT there may be a meaningful difference between - * fb_blank and power ... there seem to be some cases - * this doesn't handle correctly. - */ - if (bl->props.fb_blank != sinfo->bl_power) - power = bl->props.fb_blank; - else if (bl->props.power != sinfo->bl_power) - power = bl->props.power; - - if (brightness < 0 && power == FB_BLANK_UNBLANK) - brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); - else if (power != FB_BLANK_UNBLANK) - brightness = 0; + int brightness = backlight_get_brightness(bl); lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness); if (contrast_ctr & ATMEL_LCDC_POL_POSITIVE) @@ -133,8 +117,6 @@ static int atmel_bl_update_status(struct backlight_device *bl) else lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr); - bl->props.fb_blank = bl->props.power = sinfo->bl_power = power; - return 0; } @@ -155,8 +137,6 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo) struct backlight_properties props; struct backlight_device *bl; - sinfo->bl_power = FB_BLANK_UNBLANK; - if (sinfo->backlight) return; From 2ec1b17f745b08526220f3c169d2eb9799a9be39 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 6 Jan 2023 09:39:49 -0700 Subject: [PATCH 037/454] cxl: fix cxl_report_and_clear() RAS UE addr mis-assignment 'addr' that contains RAS UE register address is re-assigned to RAS_CAP_CONTROL offset if there are multiple UE errors. Use different addr variable to avoid the reassignment mistake. Fixes: 2905cb5236cb ("cxl/pci: Add (hopeful) error handling support") Reported-by: Jonathan Cameron Signed-off-by: Dave Jiang Reviewed-by: Jonathan Cameron Reviewed-by: Ira Weiny Link: https://lore.kernel.org/r/167302318779.580155.15233596744650706167.stgit@djiang5-mobl3.local Signed-off-by: Dan Williams --- drivers/cxl/pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c index 33083a522fd1..258004f34281 100644 --- a/drivers/cxl/pci.c +++ b/drivers/cxl/pci.c @@ -554,8 +554,11 @@ static bool cxl_report_and_clear(struct cxl_dev_state *cxlds) /* If multiple errors, log header points to first error from ctrl reg */ if (hweight32(status) > 1) { - addr = cxlds->regs.ras + CXL_RAS_CAP_CONTROL_OFFSET; - fe = BIT(FIELD_GET(CXL_RAS_CAP_CONTROL_FE_MASK, readl(addr))); + void __iomem *rcc_addr = + cxlds->regs.ras + CXL_RAS_CAP_CONTROL_OFFSET; + + fe = BIT(FIELD_GET(CXL_RAS_CAP_CONTROL_FE_MASK, + readl(rcc_addr))); } else { fe = status; } From 101ca8d05913b7d1e6e8b9dd792193d4082fff86 Mon Sep 17 00:00:00 2001 From: Shanker Donthineni Date: Mon, 2 Jan 2023 17:06:30 -0600 Subject: [PATCH 038/454] rtc: efi: Enable SET/GET WAKEUP services as optional The current implementation of rtc-efi is expecting all the 4 time services GET{SET}_TIME{WAKEUP} must be supported by UEFI firmware. As per the EFI_RT_PROPERTIES_TABLE, the platform specific implementations can choose to enable selective time services based on the RTC device capabilities. This patch does the following changes to provide GET/SET RTC services on platforms that do not support the WAKEUP feature. 1) Relax time services cap check when creating a platform device. 2) Clear RTC_FEATURE_ALARM bit in the absence of WAKEUP services. 3) Conditional alarm entries in '/proc/driver/rtc'. Cc: # v6.0+ Signed-off-by: Shanker Donthineni Link: https://lore.kernel.org/r/20230102230630.192911-1-sdonthineni@nvidia.com Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-efi.c | 46 ++++++++++++++++++++++++------------------- include/linux/efi.h | 3 ++- 2 files changed, 28 insertions(+), 21 deletions(-) diff --git a/drivers/rtc/rtc-efi.c b/drivers/rtc/rtc-efi.c index e991cccdb6e9..1e8bc6cc1e12 100644 --- a/drivers/rtc/rtc-efi.c +++ b/drivers/rtc/rtc-efi.c @@ -188,9 +188,10 @@ static int efi_set_time(struct device *dev, struct rtc_time *tm) static int efi_procfs(struct device *dev, struct seq_file *seq) { - efi_time_t eft, alm; - efi_time_cap_t cap; - efi_bool_t enabled, pending; + efi_time_t eft, alm; + efi_time_cap_t cap; + efi_bool_t enabled, pending; + struct rtc_device *rtc = dev_get_drvdata(dev); memset(&eft, 0, sizeof(eft)); memset(&alm, 0, sizeof(alm)); @@ -213,23 +214,25 @@ static int efi_procfs(struct device *dev, struct seq_file *seq) /* XXX fixme: convert to string? */ seq_printf(seq, "Timezone\t: %u\n", eft.timezone); - seq_printf(seq, - "Alarm Time\t: %u:%u:%u.%09u\n" - "Alarm Date\t: %u-%u-%u\n" - "Alarm Daylight\t: %u\n" - "Enabled\t\t: %s\n" - "Pending\t\t: %s\n", - alm.hour, alm.minute, alm.second, alm.nanosecond, - alm.year, alm.month, alm.day, - alm.daylight, - enabled == 1 ? "yes" : "no", - pending == 1 ? "yes" : "no"); + if (test_bit(RTC_FEATURE_ALARM, rtc->features)) { + seq_printf(seq, + "Alarm Time\t: %u:%u:%u.%09u\n" + "Alarm Date\t: %u-%u-%u\n" + "Alarm Daylight\t: %u\n" + "Enabled\t\t: %s\n" + "Pending\t\t: %s\n", + alm.hour, alm.minute, alm.second, alm.nanosecond, + alm.year, alm.month, alm.day, + alm.daylight, + enabled == 1 ? "yes" : "no", + pending == 1 ? "yes" : "no"); - if (eft.timezone == EFI_UNSPECIFIED_TIMEZONE) - seq_puts(seq, "Timezone\t: unspecified\n"); - else - /* XXX fixme: convert to string? */ - seq_printf(seq, "Timezone\t: %u\n", alm.timezone); + if (eft.timezone == EFI_UNSPECIFIED_TIMEZONE) + seq_puts(seq, "Timezone\t: unspecified\n"); + else + /* XXX fixme: convert to string? */ + seq_printf(seq, "Timezone\t: %u\n", alm.timezone); + } /* * now prints the capabilities @@ -269,7 +272,10 @@ static int __init efi_rtc_probe(struct platform_device *dev) rtc->ops = &efi_rtc_ops; clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->features); - set_bit(RTC_FEATURE_ALARM_WAKEUP_ONLY, rtc->features); + if (efi_rt_services_supported(EFI_RT_SUPPORTED_WAKEUP_SERVICES)) + set_bit(RTC_FEATURE_ALARM_WAKEUP_ONLY, rtc->features); + else + clear_bit(RTC_FEATURE_ALARM, rtc->features); device_init_wakeup(&dev->dev, true); diff --git a/include/linux/efi.h b/include/linux/efi.h index 4b27519143f5..98598bd1d2fa 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -668,7 +668,8 @@ extern struct efi { #define EFI_RT_SUPPORTED_ALL 0x3fff -#define EFI_RT_SUPPORTED_TIME_SERVICES 0x000f +#define EFI_RT_SUPPORTED_TIME_SERVICES 0x0003 +#define EFI_RT_SUPPORTED_WAKEUP_SERVICES 0x000c #define EFI_RT_SUPPORTED_VARIABLE_SERVICES 0x0070 extern struct mm_struct efi_mm; From 51b3802e79606b2326f4a8cac0f2766a2e15338b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 4 Jan 2023 10:56:12 +0100 Subject: [PATCH 039/454] dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property The RTC can be used as a wakeup source on at least some platforms so allow it to be described as such. Signed-off-by: Johan Hovold Acked-by: Rob Herring Link: https://lore.kernel.org/r/20230104095612.6756-1-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni --- Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml index 0a7aa29563c1..21c8ea08ff0a 100644 --- a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml @@ -40,6 +40,8 @@ properties: description: Indicates that the setting of RTC time is allowed by the host CPU. + wakeup-source: true + required: - compatible - reg From 895c0747f726bb50c9b7a805613a61d1b6f9fa06 Mon Sep 17 00:00:00 2001 From: Niklas Schnelle Date: Tue, 10 Jan 2023 17:44:27 +0100 Subject: [PATCH 040/454] vfio/type1: Respect IOMMU reserved regions in vfio_test_domain_fgsp() Since commit cbf7827bc5dc ("iommu/s390: Fix potential s390_domain aperture shrinking") the s390 IOMMU driver uses reserved regions for the system provided DMA ranges of PCI devices. Previously it reduced the size of the IOMMU aperture and checked it on each mapping operation. On current machines the system denies use of DMA addresses below 2^32 for all PCI devices. Usually mapping IOVAs in a reserved regions is harmless until a DMA actually tries to utilize the mapping. However on s390 there is a virtual PCI device called ISM which is implemented in firmware and used for cross LPAR communication. Unlike real PCI devices this device does not use the hardware IOMMU but inspects IOMMU translation tables directly on IOTLB flush (s390 RPCIT instruction). If it detects IOVA mappings outside the allowed ranges it goes into an error state. This error state then causes the device to be unavailable to the KVM guest. Analysing this we found that vfio_test_domain_fgsp() maps 2 pages at DMA address 0 irrespective of the IOMMUs reserved regions. Even if usually harmless this seems wrong in the general case so instead go through the freshly updated IOVA list and try to find a range that isn't reserved, and fits 2 pages, is PAGE_SIZE * 2 aligned. If found use that for testing for fine grained super pages. Fixes: af029169b8fd ("vfio/type1: Check reserved region conflict and update iova list") Signed-off-by: Niklas Schnelle Reviewed-by: Matthew Rosato Reviewed-by: Jason Gunthorpe Link: https://lore.kernel.org/r/20230110164427.4051938-2-schnelle@linux.ibm.com Signed-off-by: Alex Williamson --- drivers/vfio/vfio_iommu_type1.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index 23c24fe98c00..2209372f236d 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -1856,24 +1856,33 @@ unwind: * significantly boosts non-hugetlbfs mappings and doesn't seem to hurt when * hugetlbfs is in use. */ -static void vfio_test_domain_fgsp(struct vfio_domain *domain) +static void vfio_test_domain_fgsp(struct vfio_domain *domain, struct list_head *regions) { - struct page *pages; int ret, order = get_order(PAGE_SIZE * 2); + struct vfio_iova *region; + struct page *pages; + dma_addr_t start; pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, order); if (!pages) return; - ret = iommu_map(domain->domain, 0, page_to_phys(pages), PAGE_SIZE * 2, - IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE); - if (!ret) { - size_t unmapped = iommu_unmap(domain->domain, 0, PAGE_SIZE); + list_for_each_entry(region, regions, list) { + start = ALIGN(region->start, PAGE_SIZE * 2); + if (start >= region->end || (region->end - start < PAGE_SIZE * 2)) + continue; - if (unmapped == PAGE_SIZE) - iommu_unmap(domain->domain, PAGE_SIZE, PAGE_SIZE); - else - domain->fgsp = true; + ret = iommu_map(domain->domain, start, page_to_phys(pages), PAGE_SIZE * 2, + IOMMU_READ | IOMMU_WRITE | IOMMU_CACHE); + if (!ret) { + size_t unmapped = iommu_unmap(domain->domain, start, PAGE_SIZE); + + if (unmapped == PAGE_SIZE) + iommu_unmap(domain->domain, start + PAGE_SIZE, PAGE_SIZE); + else + domain->fgsp = true; + } + break; } __free_pages(pages, order); @@ -2326,7 +2335,7 @@ static int vfio_iommu_type1_attach_group(void *iommu_data, } } - vfio_test_domain_fgsp(domain); + vfio_test_domain_fgsp(domain, &iova_copy); /* replay mappings on new domains */ ret = vfio_iommu_replay(iommu, domain); From 9c445d2637c938a800fcc8b5f0b10e60c94460c7 Mon Sep 17 00:00:00 2001 From: Werner Sembach Date: Tue, 10 Jan 2023 14:45:24 +0100 Subject: [PATCH 041/454] Input: i8042 - add Clevo PCX0DX to i8042 quirk table The Clevo PCX0DX/TUXEDO XP1511, need quirks for the keyboard to not be occasionally unresponsive after resume. Signed-off-by: Werner Sembach Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede Reviewed-by: Mattijs Korpershoek Link: https://lore.kernel.org/r/20230110134524.553620-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-acpipnpio.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index 46f8a694291e..efc61736099b 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -1238,6 +1238,13 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "PCX0DX"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "X170SM"), From 7fd26a27680aa9032920f798a5a8b38a2c61075f Mon Sep 17 00:00:00 2001 From: Syed Saba Kareem Date: Wed, 11 Jan 2023 15:51:23 +0530 Subject: [PATCH 042/454] ASoC: amd: yc: Add DMI support for new acer/emdoor platforms Adding DMI entries to support new acer/emdoor platforms. Suggested-by: shanshengwang Signed-off-by: Syed Saba Kareem Link: https://lore.kernel.org/r/20230111102130.2276391-1-Syed.SabaKareem@amd.com Signed-off-by: Mark Brown --- sound/soc/amd/yc/acp6x-mach.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 0d283e41f66d..00fb976e0b81 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -234,6 +234,20 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Blade 14 (2022) - RZ09-0427"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "RB"), + DMI_MATCH(DMI_PRODUCT_NAME, "Swift SFA16-41"), + } + }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IRBIS"), + DMI_MATCH(DMI_PRODUCT_NAME, "15NBC1011"), + } + }, {} }; From a4e03921c1bb118e6718e0a3b0322a2c13ed172b Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Tue, 13 Dec 2022 20:24:03 +0100 Subject: [PATCH 043/454] ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment zero_page is a void* pointer but memblock_alloc() returns phys_addr_t type so this generates a warning while using clang and with -Wint-error enabled that becomes and error. So let's cast the return of memblock_alloc() to (void *). Cc: # 4.14.x + Fixes: 340a982825f7 ("ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation") Signed-off-by: Giulio Benetti Signed-off-by: Russell King (Oracle) --- arch/arm/mm/nommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index c1494a4dee25..53f2d8774fdb 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -161,7 +161,7 @@ void __init paging_init(const struct machine_desc *mdesc) mpu_setup(); /* allocate the zero page. */ - zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE); + zero_page = (void *)memblock_alloc(PAGE_SIZE, PAGE_SIZE); if (!zero_page) panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, PAGE_SIZE, PAGE_SIZE); From 3cb0f23039e0e3395a96e0f52bd69910ced2f720 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 6 Jan 2023 17:18:21 +0100 Subject: [PATCH 044/454] ARM: 9284/1: include from proc-macros.S to fix -Wundef warnings Since commit 80b6093b55e3 ("kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds"), building with W=1 detects -Wundef warnings for assembly code. $ make W=1 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- arch/arm/mm/ [snip] AS arch/arm/mm/cache-v7.o In file included from arch/arm/mm/cache-v7.S:17: arch/arm/mm/proc-macros.S:109:5: warning: "L_PTE_SHARED" is not defined, evaluates to 0 [-Wundef] 109 | #if L_PTE_SHARED != PTE_EXT_SHARED | ^~~~~~~~~~~~ arch/arm/mm/proc-macros.S:109:21: warning: "PTE_EXT_SHARED" is not defined, evaluates to 0 [-Wundef] 109 | #if L_PTE_SHARED != PTE_EXT_SHARED | ^~~~~~~~~~~~~~ arch/arm/mm/proc-macros.S:113:10: warning: "L_PTE_XN" is not defined, evaluates to 0 [-Wundef] 113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\ | ^~~~~~~~ arch/arm/mm/proc-macros.S:113:19: warning: "L_PTE_USER" is not defined, evaluates to 0 [-Wundef] 113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\ | ^~~~~~~~~~ arch/arm/mm/proc-macros.S:113:30: warning: "L_PTE_RDONLY" is not defined, evaluates to 0 [-Wundef] 113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\ | ^~~~~~~~~~~~ arch/arm/mm/proc-macros.S:113:43: warning: "L_PTE_DIRTY" is not defined, evaluates to 0 [-Wundef] 113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\ | ^~~~~~~~~~~ arch/arm/mm/proc-macros.S:113:55: warning: "L_PTE_YOUNG" is not defined, evaluates to 0 [-Wundef] 113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\ | ^~~~~~~~~~~ arch/arm/mm/proc-macros.S:114:10: warning: "L_PTE_PRESENT" is not defined, evaluates to 0 [-Wundef] 114 | L_PTE_PRESENT) > L_PTE_SHARED | ^~~~~~~~~~~~~ arch/arm/mm/proc-macros.S:114:27: warning: "L_PTE_SHARED" is not defined, evaluates to 0 [-Wundef] 114 | L_PTE_PRESENT) > L_PTE_SHARED | ^~~~~~~~~~~~ Include from proc-macros.S to fix the warnings. Signed-off-by: Masahiro Yamada Signed-off-by: Russell King (Oracle) --- arch/arm/mm/proc-macros.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index fa6999e24b07..e43f6d716b4b 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -6,6 +6,7 @@ * VM_EXEC */ #include +#include #include #ifdef CONFIG_CPU_V7M From d784fc8be6814b31854f7b529919ca4506ff8066 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 12 Jan 2023 13:23:56 +0200 Subject: [PATCH 045/454] ASoC: amd: acp-es8336: Drop reference count of ACPI device after use Theoretically the device might gone if its reference count drops to 0. This might be the case when we try to find the first physical node of the ACPI device. We need to keep reference to it until we get a result of the above mentioned call. Refactor the code to drop the reference count at the correct place. While at it, move to acpi_dev_put() as symmetrical call to the acpi_dev_get_first_match_dev(). Fixes: 02527c3f2300 ("ASoC: amd: add Machine driver for Jadeite platform") Signed-off-by: Andy Shevchenko Acked-by: Vijendar Mukunda Link: https://lore.kernel.org/r/20230112112356.67643-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/amd/acp-es8336.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/amd/acp-es8336.c b/sound/soc/amd/acp-es8336.c index 2fe8df86053a..89499542c803 100644 --- a/sound/soc/amd/acp-es8336.c +++ b/sound/soc/amd/acp-es8336.c @@ -198,9 +198,11 @@ static int st_es8336_late_probe(struct snd_soc_card *card) int ret; adev = acpi_dev_get_first_match_dev("ESSX8336", NULL, -1); - if (adev) - put_device(&adev->dev); + if (!adev) + return -ENODEV; + codec_dev = acpi_get_first_physical_node(adev); + acpi_dev_put(adev); if (!codec_dev) dev_err(card->dev, "can not find codec dev\n"); From 6b1c0bd6fdefbf3c3d75680c2708f5423ef72e46 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 12 Jan 2023 13:28:48 +0200 Subject: [PATCH 046/454] ASoC: Intel: bytcht_es8316: Drop reference count of ACPI device after use Theoretically the device might gone if its reference count drops to 0. This might be the case when we try to find the first physical node of the ACPI device. We need to keep reference to it until we get a result of the above mentioned call. Refactor the code to drop the reference count at the correct place. While at it, move to acpi_dev_put() as symmetrical call to the acpi_dev_get_first_match_dev(). Fixes: 3c22a73fb873 ("ASoC: Intel: bytcht_es8316: fix HID handling") Signed-off-by: Andy Shevchenko Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20230112112852.67714-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcht_es8316.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 09d1f0f6d686..df157b01df8b 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -497,21 +497,28 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) if (adev) { snprintf(codec_name, sizeof(codec_name), "i2c-%s", acpi_dev_name(adev)); - put_device(&adev->dev); byt_cht_es8316_dais[dai_index].codecs->name = codec_name; } else { dev_err(dev, "Error cannot find '%s' dev\n", mach->id); return -ENXIO; } + codec_dev = acpi_get_first_physical_node(adev); + acpi_dev_put(adev); + if (!codec_dev) + return -EPROBE_DEFER; + priv->codec_dev = get_device(codec_dev); + /* override platform name, if required */ byt_cht_es8316_card.dev = dev; platform_name = mach->mach_params.platform; ret = snd_soc_fixup_dai_links_platform_name(&byt_cht_es8316_card, platform_name); - if (ret) + if (ret) { + put_device(codec_dev); return ret; + } /* Check for BYTCR or other platform and setup quirks */ dmi_id = dmi_first_match(byt_cht_es8316_quirk_table); @@ -539,13 +546,10 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) /* get the clock */ priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3"); - if (IS_ERR(priv->mclk)) + if (IS_ERR(priv->mclk)) { + put_device(codec_dev); return dev_err_probe(dev, PTR_ERR(priv->mclk), "clk_get pmc_plt_clk_3 failed\n"); - - codec_dev = acpi_get_first_physical_node(adev); - if (!codec_dev) - return -EPROBE_DEFER; - priv->codec_dev = get_device(codec_dev); + } if (quirk & BYT_CHT_ES8316_JD_INVERTED) props[cnt++] = PROPERTY_ENTRY_BOOL("everest,jack-detect-inverted"); From 721858823d7cdc8f2a897579b040e935989f6f02 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 12 Jan 2023 13:28:49 +0200 Subject: [PATCH 047/454] ASoC: Intel: bytcr_rt5651: Drop reference count of ACPI device after use Theoretically the device might gone if its reference count drops to 0. This might be the case when we try to find the first physical node of the ACPI device. We need to keep reference to it until we get a result of the above mentioned call. Refactor the code to drop the reference count at the correct place. While at it, move to acpi_dev_put() as symmetrical call to the acpi_dev_get_first_match_dev(). Fixes: 02c0a3b3047f ("ASoC: Intel: bytcr_rt5651: add MCLK, quirks and cleanups") Signed-off-by: Andy Shevchenko Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20230112112852.67714-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 81ac6eeda2e6..8fca9b82d4d0 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -922,7 +922,6 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) if (adev) { snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name), "i2c-%s", acpi_dev_name(adev)); - put_device(&adev->dev); byt_rt5651_dais[dai_index].codecs->name = byt_rt5651_codec_name; } else { dev_err(dev, "Error cannot find '%s' dev\n", mach->id); @@ -930,6 +929,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) } codec_dev = acpi_get_first_physical_node(adev); + acpi_dev_put(adev); if (!codec_dev) return -EPROBE_DEFER; priv->codec_dev = get_device(codec_dev); From cbf87bcf46e399e9a5288430d940efbad3551c68 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 12 Jan 2023 13:28:50 +0200 Subject: [PATCH 048/454] ASoC: Intel: bytcr_rt5640: Drop reference count of ACPI device after use Theoretically the device might gone if its reference count drops to 0. This might be the case when we try to find the first physical node of the ACPI device. We need to keep reference to it until we get a result of the above mentioned call. Refactor the code to drop the reference count at the correct place. While at it, move to acpi_dev_put() as symmetrical call to the acpi_dev_get_first_match_dev(). Fixes: a232b96dcece ("ASoC: Intel: bytcr_rt5640: use HID translation util") Signed-off-by: Andy Shevchenko Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20230112112852.67714-4-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 4699ca79f3ea..79e0039c79a3 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -1636,13 +1636,18 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) if (adev) { snprintf(byt_rt5640_codec_name, sizeof(byt_rt5640_codec_name), "i2c-%s", acpi_dev_name(adev)); - put_device(&adev->dev); byt_rt5640_dais[dai_index].codecs->name = byt_rt5640_codec_name; } else { dev_err(dev, "Error cannot find '%s' dev\n", mach->id); return -ENXIO; } + codec_dev = acpi_get_first_physical_node(adev); + acpi_dev_put(adev); + if (!codec_dev) + return -EPROBE_DEFER; + priv->codec_dev = get_device(codec_dev); + /* * swap SSP0 if bytcr is detected * (will be overridden if DMI quirk is detected) @@ -1717,11 +1722,6 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) byt_rt5640_quirk = quirk_override; } - codec_dev = acpi_get_first_physical_node(adev); - if (!codec_dev) - return -EPROBE_DEFER; - priv->codec_dev = get_device(codec_dev); - if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) { acpi_dev_add_driver_gpios(ACPI_COMPANION(priv->codec_dev), byt_rt5640_hp_elitepad_1000g2_gpios); From c8aa49abdeda2ab587aadb083e670f6aa0236f93 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 12 Jan 2023 13:28:51 +0200 Subject: [PATCH 049/454] ASoC: Intel: bytcr_wm5102: Drop reference count of ACPI device after use Theoretically the device might gone if its reference count drops to 0. This might be the case when we try to find the first physical node of the ACPI device. We need to keep reference to it until we get a result of the above mentioned call. Refactor the code to drop the reference count at the correct place. While at it, move to acpi_dev_put() as symmetrical call to the acpi_dev_get_first_match_dev(). Fixes: 9a87fc1e0619 ("ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102") Signed-off-by: Andy Shevchenko Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20230112112852.67714-5-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_wm5102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/bytcr_wm5102.c b/sound/soc/intel/boards/bytcr_wm5102.c index 1669eb3bd80f..c0706537f673 100644 --- a/sound/soc/intel/boards/bytcr_wm5102.c +++ b/sound/soc/intel/boards/bytcr_wm5102.c @@ -411,9 +411,9 @@ static int snd_byt_wm5102_mc_probe(struct platform_device *pdev) return -ENOENT; } snprintf(codec_name, sizeof(codec_name), "spi-%s", acpi_dev_name(adev)); - put_device(&adev->dev); codec_dev = bus_find_device_by_name(&spi_bus_type, NULL, codec_name); + acpi_dev_put(adev); if (!codec_dev) return -EPROBE_DEFER; From 64e57b2195725c1ae2246a8a2ce224abb60620ac Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 12 Jan 2023 13:28:52 +0200 Subject: [PATCH 050/454] ASoC: Intel: sof_es8336: Drop reference count of ACPI device after use Theoretically the device might gone if its reference count drops to 0. This might be the case when we try to find the first physical node of the ACPI device. We need to keep reference to it until we get a result of the above mentioned call. Refactor the code to drop the reference count at the correct place. While at it, move to acpi_dev_put() as symmetrical call to the acpi_dev_get_first_match_dev(). Fixes: a164137ce91a ("ASoC: Intel: add machine driver for SOF+ES8336") Signed-off-by: Andy Shevchenko Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20230112112852.67714-6-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/sof_es8336.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c index 773e5d1d87d4..894b6610b9e2 100644 --- a/sound/soc/intel/boards/sof_es8336.c +++ b/sound/soc/intel/boards/sof_es8336.c @@ -681,7 +681,6 @@ static int sof_es8336_probe(struct platform_device *pdev) if (adev) { snprintf(codec_name, sizeof(codec_name), "i2c-%s", acpi_dev_name(adev)); - put_device(&adev->dev); dai_links[0].codecs->name = codec_name; /* also fixup codec dai name if relevant */ @@ -692,16 +691,19 @@ static int sof_es8336_probe(struct platform_device *pdev) return -ENXIO; } - ret = snd_soc_fixup_dai_links_platform_name(&sof_es8336_card, - mach->mach_params.platform); - if (ret) - return ret; - codec_dev = acpi_get_first_physical_node(adev); + acpi_dev_put(adev); if (!codec_dev) return -EPROBE_DEFER; priv->codec_dev = get_device(codec_dev); + ret = snd_soc_fixup_dai_links_platform_name(&sof_es8336_card, + mach->mach_params.platform); + if (ret) { + put_device(codec_dev); + return ret; + } + if (quirk & SOF_ES8336_JD_INVERTED) props[cnt++] = PROPERTY_ENTRY_BOOL("everest,jack-detect-inverted"); From e26fd28db82899be71b4b949527373d0a6be1e65 Mon Sep 17 00:00:00 2001 From: Qais Yousef Date: Thu, 12 Jan 2023 12:27:07 +0000 Subject: [PATCH 051/454] sched/uclamp: Fix a uninitialized variable warnings Addresses the following warnings: > config: riscv-randconfig-m031-20221111 > compiler: riscv64-linux-gcc (GCC) 12.1.0 > > smatch warnings: > kernel/sched/fair.c:7263 find_energy_efficient_cpu() error: uninitialized symbol 'util_min'. > kernel/sched/fair.c:7263 find_energy_efficient_cpu() error: uninitialized symbol 'util_max'. Fixes: 244226035a1f ("sched/uclamp: Fix fits_capacity() check in feec()") Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Qais Yousef (Google) Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Vincent Guittot Link: https://lore.kernel.org/r/20230112122708.330667-2-qyousef@layalina.io --- kernel/sched/fair.c | 33 +++++++++++++++------------------ 1 file changed, 15 insertions(+), 18 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index c36aa54ae071..be43731b147d 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -7229,10 +7229,10 @@ static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu) eenv_task_busy_time(&eenv, p, prev_cpu); for (; pd; pd = pd->next) { + unsigned long util_min = p_util_min, util_max = p_util_max; unsigned long cpu_cap, cpu_thermal_cap, util; unsigned long cur_delta, max_spare_cap = 0; unsigned long rq_util_min, rq_util_max; - unsigned long util_min, util_max; unsigned long prev_spare_cap = 0; int max_spare_cap_cpu = -1; unsigned long base_energy; @@ -7251,6 +7251,8 @@ static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu) eenv.pd_cap = 0; for_each_cpu(cpu, cpus) { + struct rq *rq = cpu_rq(cpu); + eenv.pd_cap += cpu_thermal_cap; if (!cpumask_test_cpu(cpu, sched_domain_span(sd))) @@ -7269,24 +7271,19 @@ static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu) * much capacity we can get out of the CPU; this is * aligned with sched_cpu_util(). */ - if (uclamp_is_used()) { - if (uclamp_rq_is_idle(cpu_rq(cpu))) { - util_min = p_util_min; - util_max = p_util_max; - } else { - /* - * Open code uclamp_rq_util_with() except for - * the clamp() part. Ie: apply max aggregation - * only. util_fits_cpu() logic requires to - * operate on non clamped util but must use the - * max-aggregated uclamp_{min, max}. - */ - rq_util_min = uclamp_rq_get(cpu_rq(cpu), UCLAMP_MIN); - rq_util_max = uclamp_rq_get(cpu_rq(cpu), UCLAMP_MAX); + if (uclamp_is_used() && !uclamp_rq_is_idle(rq)) { + /* + * Open code uclamp_rq_util_with() except for + * the clamp() part. Ie: apply max aggregation + * only. util_fits_cpu() logic requires to + * operate on non clamped util but must use the + * max-aggregated uclamp_{min, max}. + */ + rq_util_min = uclamp_rq_get(rq, UCLAMP_MIN); + rq_util_max = uclamp_rq_get(rq, UCLAMP_MAX); - util_min = max(rq_util_min, p_util_min); - util_max = max(rq_util_max, p_util_max); - } + util_min = max(rq_util_min, p_util_min); + util_max = max(rq_util_max, p_util_max); } if (!util_fits_cpu(util, util_min, util_max, cpu)) continue; From da07d2f9c153e457e845d4dcfdd13568d71d18a4 Mon Sep 17 00:00:00 2001 From: Qais Yousef Date: Thu, 12 Jan 2023 12:27:08 +0000 Subject: [PATCH 052/454] sched/fair: Fixes for capacity inversion detection Traversing the Perf Domains requires rcu_read_lock() to be held and is conditional on sched_energy_enabled(). Ensure right protections applied. Also skip capacity inversion detection for our own pd; which was an error. Fixes: 44c7b80bffc3 ("sched/fair: Detect capacity inversion") Reported-by: Dietmar Eggemann Signed-off-by: Qais Yousef (Google) Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Vincent Guittot Link: https://lore.kernel.org/r/20230112122708.330667-3-qyousef@layalina.io --- kernel/sched/fair.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index be43731b147d..0f8736991427 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -8868,16 +8868,23 @@ static void update_cpu_capacity(struct sched_domain *sd, int cpu) * * Thermal pressure will impact all cpus in this perf domain * equally. */ - if (static_branch_unlikely(&sched_asym_cpucapacity)) { + if (sched_energy_enabled()) { unsigned long inv_cap = capacity_orig - thermal_load_avg(rq); - struct perf_domain *pd = rcu_dereference(rq->rd->pd); + struct perf_domain *pd; + rcu_read_lock(); + + pd = rcu_dereference(rq->rd->pd); rq->cpu_capacity_inverted = 0; for (; pd; pd = pd->next) { struct cpumask *pd_span = perf_domain_span(pd); unsigned long pd_cap_orig, pd_cap; + /* We can't be inverted against our own pd */ + if (cpumask_test_cpu(cpu_of(rq), pd_span)) + continue; + cpu = cpumask_any(pd_span); pd_cap_orig = arch_scale_cpu_capacity(cpu); @@ -8902,6 +8909,8 @@ static void update_cpu_capacity(struct sched_domain *sd, int cpu) break; } } + + rcu_read_unlock(); } trace_sched_cpu_capacity_tp(rq); From f89d783d68dcc6b2ce4fe3bda972ae0f84df0dca Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Amadeusz=20S=C5=82awi=C5=84ski?= Date: Fri, 13 Jan 2023 20:03:08 +0100 Subject: [PATCH 053/454] ASoC: Intel: avs: Implement PCI shutdown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On shutdown reference to i915 driver needs to be released to not spam logs with unnecessary warnings. While at it do some additional cleanup to make sure DSP is powered down and interrupts from device are disabled. Fixes: 1affc44ea5dd ("ASoC: Intel: avs: PCI driver implementation") Reported-by: Kornel Dulęba Signed-off-by: Amadeusz Sławiński Reviewed-by: Cezary Rojewski Link: https://lore.kernel.org/r/20230113190310.1451693-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/avs/core.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/sound/soc/intel/avs/core.c b/sound/soc/intel/avs/core.c index 2ca24273c491..637501850728 100644 --- a/sound/soc/intel/avs/core.c +++ b/sound/soc/intel/avs/core.c @@ -481,6 +481,29 @@ err_remap_bar0: return ret; } +static void avs_pci_shutdown(struct pci_dev *pci) +{ + struct hdac_bus *bus = pci_get_drvdata(pci); + struct avs_dev *adev = hdac_to_avs(bus); + + cancel_work_sync(&adev->probe_work); + avs_ipc_block(adev->ipc); + + snd_hdac_stop_streams(bus); + avs_dsp_op(adev, int_control, false); + snd_hdac_ext_bus_ppcap_int_enable(bus, false); + snd_hdac_ext_bus_link_power_down_all(bus); + + snd_hdac_bus_stop_chip(bus); + snd_hdac_display_power(bus, HDA_CODEC_IDX_CONTROLLER, false); + + if (avs_platattr_test(adev, CLDMA)) + pci_free_irq(pci, 0, &code_loader); + pci_free_irq(pci, 0, adev); + pci_free_irq(pci, 0, bus); + pci_free_irq_vectors(pci); +} + static void avs_pci_remove(struct pci_dev *pci) { struct hdac_device *hdev, *save; @@ -739,6 +762,7 @@ static struct pci_driver avs_pci_driver = { .id_table = avs_ids, .probe = avs_pci_probe, .remove = avs_pci_remove, + .shutdown = avs_pci_shutdown, .driver = { .pm = &avs_dev_pm, }, From 84ed64b1a7a7fcd507598dee7708c1f225123711 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Tue, 10 Jan 2023 13:53:10 +0100 Subject: [PATCH 054/454] scsi: target: core: Fix warning on RT kernels Calling spin_lock_irqsave() does not disable the interrupts on realtime kernels, remove the warning and replace assert_spin_locked() with lockdep_assert_held(). Signed-off-by: Maurizio Lombardi Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20230110125310.55884-1-mlombard@redhat.com Signed-off-by: Martin K. Petersen --- drivers/target/target_core_tmr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index bac111456fa1..2b95b4550a63 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -73,8 +73,8 @@ static bool __target_check_io_state(struct se_cmd *se_cmd, { struct se_session *sess = se_cmd->se_sess; - assert_spin_locked(&sess->sess_cmd_lock); - WARN_ON_ONCE(!irqs_disabled()); + lockdep_assert_held(&sess->sess_cmd_lock); + /* * If command already reached CMD_T_COMPLETE state within * target_complete_cmd() or CMD_T_FABRIC_STOP due to shutdown, From f7b23d1c35d8b8de1425bdfccaefd01f3b7c9d1c Mon Sep 17 00:00:00 2001 From: Dmitry Perchanov Date: Wed, 11 Jan 2023 14:22:10 +0200 Subject: [PATCH 055/454] iio: hid: fix the retval in accel_3d_capture_sample Return value should be zero for success. This was forgotten for timestamp feature. Verified on RealSense cameras. Fixes: a96cd0f901ee ("iio: accel: hid-sensor-accel-3d: Add timestamp") Signed-off-by: Dmitry Perchanov Link: https://lore.kernel.org/r/a6dc426498221c81fa71045b41adf782ebd42136.camel@intel.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/hid-sensor-accel-3d.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c index a2def6f9380a..5eac7ea19993 100644 --- a/drivers/iio/accel/hid-sensor-accel-3d.c +++ b/drivers/iio/accel/hid-sensor-accel-3d.c @@ -280,6 +280,7 @@ static int accel_3d_capture_sample(struct hid_sensor_hub_device *hsdev, hid_sensor_convert_timestamp( &accel_state->common_attributes, *(int64_t *)raw_data); + ret = 0; break; default: break; From eb50cd5bfdac61627a5026566cf3b90ced7b141c Mon Sep 17 00:00:00 2001 From: Dmitry Perchanov Date: Wed, 11 Jan 2023 14:24:25 +0200 Subject: [PATCH 056/454] iio: hid: fix the retval in gyro_3d_capture_sample Return value should be zero for success. This was forgotten for timestamp feature. Verified on RealSense cameras. Fixes: 4648cbd8fb92 ("iio: hid-sensor-gyro-3d: Add timestamp channel") Signed-off-by: Dmitry Perchanov Link: https://lore.kernel.org/r/7c1809dc74eb2f58a20595f4d02e76934f8e9219.camel@intel.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/gyro/hid-sensor-gyro-3d.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c index 8f0ad022c7f1..698c50da1f10 100644 --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c @@ -231,6 +231,7 @@ static int gyro_3d_capture_sample(struct hid_sensor_hub_device *hsdev, gyro_state->timestamp = hid_sensor_convert_timestamp(&gyro_state->common_attributes, *(s64 *)raw_data); + ret = 0; break; default: break; From 6618d69aa129a8fc613e64775d5019524c6f231b Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Tue, 13 Dec 2022 19:03:55 +0100 Subject: [PATCH 057/454] rust: print: avoid evaluating arguments in `pr_*` macros in `unsafe` blocks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit At the moment it is possible to perform unsafe operations in the arguments of `pr_*` macros since they are evaluated inside an `unsafe` block: let x = &10u32 as *const u32; pr_info!("{}", *x); In other words, this is a soundness issue. Fix it so that it requires an explicit `unsafe` block. Reported-by: Wedson Almeida Filho Reported-by: Domen Puncer Kugler Link: https://github.com/Rust-for-Linux/linux/issues/479 Signed-off-by: Miguel Ojeda Reviewed-by: Boqun Feng Reviewed-by: Gary Guo Reviewed-by: Björn Roy Baron Reviewed-by: Vincenzo Palazzo --- rust/kernel/print.rs | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/rust/kernel/print.rs b/rust/kernel/print.rs index 29bf9c2e8aee..30103325696d 100644 --- a/rust/kernel/print.rs +++ b/rust/kernel/print.rs @@ -142,17 +142,24 @@ pub fn call_printk_cont(args: fmt::Arguments<'_>) { macro_rules! print_macro ( // The non-continuation cases (most of them, e.g. `INFO`). ($format_string:path, false, $($arg:tt)+) => ( - // SAFETY: This hidden macro should only be called by the documented - // printing macros which ensure the format string is one of the fixed - // ones. All `__LOG_PREFIX`s are null-terminated as they are generated - // by the `module!` proc macro or fixed values defined in a kernel - // crate. - unsafe { - $crate::print::call_printk( - &$format_string, - crate::__LOG_PREFIX, - format_args!($($arg)+), - ); + // To remain sound, `arg`s must be expanded outside the `unsafe` block. + // Typically one would use a `let` binding for that; however, `format_args!` + // takes borrows on the arguments, but does not extend the scope of temporaries. + // Therefore, a `match` expression is used to keep them around, since + // the scrutinee is kept until the end of the `match`. + match format_args!($($arg)+) { + // SAFETY: This hidden macro should only be called by the documented + // printing macros which ensure the format string is one of the fixed + // ones. All `__LOG_PREFIX`s are null-terminated as they are generated + // by the `module!` proc macro or fixed values defined in a kernel + // crate. + args => unsafe { + $crate::print::call_printk( + &$format_string, + crate::__LOG_PREFIX, + args, + ); + } } ); From 67a90bccad3d20829bea35cb38ad744d9b6e30f4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 12 Jan 2023 22:36:39 -0800 Subject: [PATCH 058/454] fbdev: fbmon: fix function name in kernel-doc Fix a kernel-doc warning by correcting the function name in the kernel-doc comment: drivers/video/fbdev/core/fbmon.c:1073: warning: expecting prototype for fb_get_hblank_by_freq(). Prototype was for fb_get_hblank_by_hfreq() instead Signed-off-by: Randy Dunlap Cc: Daniel Vetter Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Helge Deller --- drivers/video/fbdev/core/fbmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/core/fbmon.c b/drivers/video/fbdev/core/fbmon.c index b0e690f41025..79e5bfbdd34c 100644 --- a/drivers/video/fbdev/core/fbmon.c +++ b/drivers/video/fbdev/core/fbmon.c @@ -1050,7 +1050,7 @@ static u32 fb_get_vblank(u32 hfreq) } /** - * fb_get_hblank_by_freq - get horizontal blank time given hfreq + * fb_get_hblank_by_hfreq - get horizontal blank time given hfreq * @hfreq: horizontal freq * @xres: horizontal resolution in pixels * From ee9fffdc3887a46eab3209bc46b228b543c75fa6 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 14 Jan 2023 09:54:04 +0100 Subject: [PATCH 059/454] fbdev: omapfb: Use kstrtobool() instead of strtobool() strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file () Signed-off-by: Christophe JAILLET Signed-off-by: Helge Deller --- drivers/video/fbdev/omap2/omapfb/dss/display-sysfs.c | 7 ++++--- drivers/video/fbdev/omap2/omapfb/dss/manager-sysfs.c | 7 ++++--- drivers/video/fbdev/omap2/omapfb/dss/overlay-sysfs.c | 3 ++- drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c | 3 ++- 4 files changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/video/fbdev/omap2/omapfb/dss/display-sysfs.c b/drivers/video/fbdev/omap2/omapfb/dss/display-sysfs.c index bc5a44c2a144..ae937854403b 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/display-sysfs.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/display-sysfs.c @@ -10,6 +10,7 @@ #define DSS_SUBSYS_NAME "DISPLAY" #include +#include #include #include #include @@ -36,7 +37,7 @@ static ssize_t display_enabled_store(struct omap_dss_device *dssdev, int r; bool enable; - r = strtobool(buf, &enable); + r = kstrtobool(buf, &enable); if (r) return r; @@ -73,7 +74,7 @@ static ssize_t display_tear_store(struct omap_dss_device *dssdev, if (!dssdev->driver->enable_te || !dssdev->driver->get_te) return -ENOENT; - r = strtobool(buf, &te); + r = kstrtobool(buf, &te); if (r) return r; @@ -183,7 +184,7 @@ static ssize_t display_mirror_store(struct omap_dss_device *dssdev, if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) return -ENOENT; - r = strtobool(buf, &mirror); + r = kstrtobool(buf, &mirror); if (r) return r; diff --git a/drivers/video/fbdev/omap2/omapfb/dss/manager-sysfs.c b/drivers/video/fbdev/omap2/omapfb/dss/manager-sysfs.c index ba21c4a2633d..1b644be5fe2e 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/manager-sysfs.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/manager-sysfs.c @@ -10,6 +10,7 @@ #define DSS_SUBSYS_NAME "MANAGER" #include +#include #include #include #include @@ -246,7 +247,7 @@ static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr, bool enable; int r; - r = strtobool(buf, &enable); + r = kstrtobool(buf, &enable); if (r) return r; @@ -290,7 +291,7 @@ static ssize_t manager_alpha_blending_enabled_store( if(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER)) return -ENODEV; - r = strtobool(buf, &enable); + r = kstrtobool(buf, &enable); if (r) return r; @@ -329,7 +330,7 @@ static ssize_t manager_cpr_enable_store(struct omap_overlay_manager *mgr, if (!dss_has_feature(FEAT_CPR)) return -ENODEV; - r = strtobool(buf, &enable); + r = kstrtobool(buf, &enable); if (r) return r; diff --git a/drivers/video/fbdev/omap2/omapfb/dss/overlay-sysfs.c b/drivers/video/fbdev/omap2/omapfb/dss/overlay-sysfs.c index 601c0beb6de9..1da4fb1c77b4 100644 --- a/drivers/video/fbdev/omap2/omapfb/dss/overlay-sysfs.c +++ b/drivers/video/fbdev/omap2/omapfb/dss/overlay-sysfs.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include